27 August 2017 to 1 September 2017
RAI Congress Center, Amsterdam, The Netherlands
Europe/Amsterdam timezone

Winding R&D for CFETR Central Solenoid Model Coil

30 Aug 2017, 13:15
1h 45m
Posters Area

Posters Area

Poster Presentation of 1h45m B1 - Superconducting Magnets for Fusion Wed-Af-Po3.02

Speaker

Houxiang HAN

Description

The central solenoid (CS) model coil is being developed to verify the large-scalar superconducting coil manufacture technology for China Fusion Engineering Test Reactor (CFETR) in ASIPP (Institute of Plasma Physics). The CS model coil composed of Nb3Sn (inner and outer coils) and NbTi (upper, middle and lower coils) hybrid superconducting magnet can reach to 12 T maximum magnetic field. All of five coils are the pancake coil composed of pancakes concentric circular turns, pancake joggles and upper & lower leads. For pancakes concentric circular turns, the minimum diameter is 1500 mm, the maximum diameter 3544.8 mm and the maximum height is 1545.4 mm. The high precision for coil continuous winding must be acquired, the innermost and outermost circular turn surface profile tolerance is 0.5 mm and the turn insulation gap tolerance is 2.6(0/+0.5) mm. The winding R&D activities, including the continuous winding for the pancakes concentric circular turns, the forming on-line for the pancake joggles, have been conducted to optimize and finalize the coil design and do the coil winding technology verification and improvement. The winding & forming for a 4×4 mock-up coil of the Nb3Sn inner coil have been finished.

Submitters Country China

Primary author

Co-authors

Presentation Materials