MT25 Conference 2017

from 27 August 2017 to 1 September 2017

RAI Congress Center, Amsterdam, The Netherlands

Europe/Amsterdam timezone

Support

info@mt-25.org

List of Speakers

Fouad Aabid CERN
- Speaker at Refinement and application of a generic CFD toolkit covering the heat flows in combined solid–liquid systems to investigate thermal quench limits of superconducting magnets
Walid Abdel-Maksoud CEA
- Speaker at Experience and modelling of quench propagation along the JT-60 SA TF coils Cable In Conduct Conductor
- Speaker at Progress of the JT-60 SA Toroidal Field coils tests in the Cold Test Facility
ILDAR ABDYUKHANOV VNIINM (Bochvar Institute)
- Speaker at Heat treatment of MgB2 superconductors with different metal sheaths
Dmitry Abin NRNU MEPhI
- Speaker at Cryo-free multisection superconducting magnetic system with MgB2 coil
Todd Adkins National High Magnetic Field Laboratory
- Speaker at 60 Tesla Pulse Coil Design and Manufacturing Facility
Min Cheol Ahn Kunsan National University
- Speaker at Design and Implementation of Ferromagnetic Shims for a 3-T 100 mm All-REBCO No-Insulation Magnet
- Speaker at Optimal Design Methodology of Multi-Width HTS Magnet
Hee-Jae Ahn NFRI
- Speaker at Structural Behavior of KSTAR CS Magnet during Plasma Operation
Liwang Ai Institute of Electrical Engineering Chinese Academy of Science
- Speaker at Analysis on end effect and levitation force calculation for radial-type superconducting magnetic bearings
Mark Ainslie University of Cambridge
- Speaker at Numerical modelling of iron-pnictide bulk superconductor magnetization
Hamoud Alafnan University of Bath
- Speaker at Quality and Stability Improvement of DC Power Systems in All Electric Ship Using SMES/Battery
Hussain Alazki Universidad Autonoma del Carmen
- Speaker at Influence of Nd, Dy and Er substitution on the structural and superconducting properties of the RuSr2GdCu2O8±Z
John Amann SLAC National Accelerator Laboratory
- Speaker at Lambertson Septum Magnet Design for the LCLS-II Beam Spreader at SLAC
Giorgio Ambrosio Fermilab
- Speaker at Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Speaker at Quench Location in the LARP MQXFS1 prototype
Naoyuki Amemiya Kyoto University
- Speaker at Effect of striating coated conductors on reducing shielding-current-induced fields in pancake coils exposed to normal magnetic fields
Andries den Ouden (Adjunct Chairman) High Field Magnet Laboratory Nijmgen
- Speaker at Design, manufacture and test of 20 kA binary current leads for the HFML 45 T hybrid magnet
V. A. Anvar University of Twente
- Speaker at Bending of CORC cables, Experiments and Modeling
- Speaker at Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling
Piergiorgio Aprili Fusion for Energy
- Speaker at THE COLD TEST FACILITY FOR THE WINDING PACK OF THE ITER TOROIDAL FIELD COIL
Diego Arbelaez LBNL
- Speaker at Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
Bernhard Auchmann CERN
- Speaker at A Proposal to Accelerate Training of Nb3Sn Accelerator Magnets via Capacitive Discharge
- Speaker at Coupling of Mechanical and Magneto-Thermal Models of Superconducting Magnet by Means of Mesh Based Interpolation
- Speaker at Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC
Julien Avronsart CEA
- Speaker at Measurement campaign on critical current for MgB2 wires and tapes under a magnetic field up to 8T
Satoshi Awaji Tohoku University
- Speaker at Performance of two-ply four-filaments Gd123 tape coil
Rodney Badcock Robinson Research Institute
- Speaker at Optimising rotor speed and design for an externally-mounted HTS dynamo
Karie Badgley Fermilab
- Speaker at Recommissioning and upgrades to the FNAL muon g-2 magnets
Geonwoo Baek Yonsei University
- Speaker at A Study on the Effect of Crossover Turn of Double Pancake Winding on Magnetic Field Homogeneity of HTS NMR Magnet
Mehdi Baghdadi University of Greenwich
- Speaker at Superconducting synchronous motor With HTS stacked tape armature
Tommaso Bagni University of Twente
- Speaker at Analysis of Minimum Quench Energy of ITER NbTi and Nb3Sn CICCs
- Speaker at Quench energy in ITER conductors for different magnetic field perturbations with JackPot and THEA combined models
- Speaker at Strand level modeling on AC loss and current distribution of prototype EU DEMO TF conductors
- Speaker at Temperature evolution in ITER CSU2 coil module during 15MA plasma scenario
Lifeng Bai Northwest Institute for Nonferrous Metal Research
- Speaker at A 9 T Cryocooler Cooled High current density NbTi superconducting magnet
Andrei Baikalov ITER
- Speaker at Analyses of the ITER Poloidal Coil joints cold test results.
Alexander Bainbridge STFC
- Speaker at Tuneable permanent magnets: Power saving solutions for the next generation of high energy accelerators.
Hugo Bajas CERN
- Speaker at Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches
- Speaker at Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
Steven Ball Oxford Instruments Nanoscience
- Speaker at Quench Behaviour of Bi2Sr2CaCu2O8+x insert coils for high field magnets
Amalia Ballarino CERN
- Speaker at Development of superconductors for future large scale applications
Tae-Kyoung Bang Republic of Korea /Chung nam nat'l University
- Speaker at Design and Optimization of Noncontact Magnetic Device for Reducing Permanent Magnet
- Speaker at Measurement and Torque Calculation of Magnetic Spur Gear Based on Quasi 3-D Analytical Method
Nobuya Banno National Institute for Materials Science
- Speaker at Irreversible strain characteristics of technical RHQT Nb3Al superconductors
Grigory Baranov Budker Institute of Nuclear Physics
- Speaker at Design and magnetic measurements of a hybrid wiggler for SR research program at VEPP-4
Romain Barbier LNCMI-EMFL-CNRS
- Speaker at Upgrade of the Grenoble High Magnetic Field Facility
emanuela barzi Fermilab
- Speaker at Development of Nb3Sn strands and Rutherford Cables for 16 T Accelerators Magnets
Markus Bauer THEVA Dünnschichttechnik GmbH
- Speaker at [Invited] HTS field coils with robust design for a superconducting wind turbine generator
- Speaker at High performance coated conductors wire for magnet applications
Jerome BEARD CNRS
- Speaker at Design and tests of the 100 T triple coil at LNCMI
Mateusz Jakub Bednarek CERN
- Speaker at Design, Assembly and Use of a Device to Eliminate Earth Faults Caused by Foreign Metallic Debris in the LHC Main Dipole Circuit
boris bellesia fusion for energy
- Speaker at Progress on European ITER Toroidal Field Coil procurement: Cold Test and Insertion Work Package
Fabrizio Bellina Udine University
- Speaker at Analysis of the effects of the insulation on the quench transverse propagation in Nb3Sn Rutherford coils
Artem Belyaev SC NIIEFA
- Speaker at NDT STATUS OF PF-1 COIL WELDS
Valery Belyakov JSC "NIIEFA"
- Speaker at Advanced mathematical model of ITER PF1 coil for manufacture quality control
Tong Ben Hebei University of Technology
- Speaker at Stress Analysis of Induction Motor Core Considering Rotational Magnetic Characteristics
Chamseddine Benabderrahmane European Synchrotron Radiation Facility
- Speaker at Permanent Magnet Dipoles For the ESRF Upgrade
Tara Benkel CNRS
- Speaker at Characterisation of HTS insulated coil for high field insert
Anne Bergen Universiteit Twente
- Speaker at Self-heating effect in HTS coils
Christophe Paul Berriaud DAPNIA
- Speaker at Quench propagation measurements on 2 km MgB2 coil up to 4 T.
Edgar Berrospe Universidad Nacional Autonoma de Mexico
- Speaker at Evaluation of hysteresis losses in the (RE)BCO pancake-wound insert of the NHMFL 32 T all-superconducting magnet using an iterative multi-scale approach
Kabindra Bhattarai Applied Superconductivity Center-NHMFL
- Speaker at Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils
Fangfang Bian Jiangsu University
- Speaker at A new dual air-gap linear permanent magnet vernier machine using ring type windings
- Speaker at Analysis and comparison of dual stator linear primary permanent magnet vernier machine and fault-tolerant linear vernier machine
Erwin Roland Bielert Univ. Illinois at Urbana-Champaign (US)
- Speaker at Operational experience with the combined solenoid/dipole magnet system of the COMPASS Experiment at CERN
Bernard Bigot ITER International Organization
- Speaker at Overall Status of the ITER Project
Mikel Bilbao Gutierrez Fusion for Energy
- Speaker at Tail Component Qualification for the EU ITER PF Coils
Dmytro Bilyi FEAAM GmbH
- Speaker at Obtaining of Inductance with Dependence on Rotor Position via Measurements, and Modeling of Inductance using Analytical and Fast Fourier transforms approaches for Lumped Parameter Model Applications
Mark Bird FSU
- Speaker at Commissioning of the 36 T Series-Connected Hybrid Magnet at the NHMFL
Florian Birnkammer Universitaet der Bundeswehr Muenchen
- Speaker at Influence of the modeling depth and voltage level on circulating currents in parallel conductors of a PMSM
Greg Boebinger National High Magnetic Field Laboratory / Florida State University
- Speaker at High Magnetic Field Science and Technology
Cristian Boffo Babcock Noell GmbH
- Speaker at Design, Manufacture and Testing of a Pair of Superconducting Solenoids for the Upgrade of the Neutron Spin-Echo Spectrometer J-NSE at the Research Reactor FRM II (Munich)
- Speaker at Status of Design and Manufacturing of PENELOPE neutron trap
- Speaker at Superconducting Undulators Toward Commercial Products
alessandro bonito oliva F4E
- Speaker at Completion and test of the first ITER TF coil winding pack by Europe
François BONNE CEA
- Speaker at Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility
Vladimir Borisov JINR
- Speaker at Magnetic measurements of the NICA booster superconducting magnets
Lorenzo Bortot CERN
- Speaker at STEAM: A co-simulation framework for modelling superconducting accelerator magnet circuits
Daniela Boso University of Padova
- Speaker at Numerical investigation on the thermo-electro-mechanical behavior of HTS tapes
Ernesto Bosque National High Magnetic Field Laboratory
- Speaker at Multiphysics FEA Led Design of Bi-2212 Round Wire Prototype Coils
EVA BOTER FUSION FOR ENERGY
- Speaker at F4E Procurement of Radial Plates for the EU ITER TF Coils complete
Luca Bottura CERN
- Speaker at High Field Accelerator Magnets: a Path to New Physics
Nicolas Bourcey CERN
- Speaker at Assembly of the Nb3Sn dipole magnet FRESCA2
Alexey Bragin Budker Institute of Nuclear Physics
- Speaker at Development of low resistance splicing between Nb3Sn and NbTi wires to make superconducting wigglers on the base of Nb3Sn superconductor
Enrico Braidotti CAEN ELS s.r.l.
- Speaker at A novel digital magnet power supply approach
Marco Breschi Bologna University
- Speaker at Analysis of losses in superconducting magnets based on the Nb3Sn Rutherford cable configuration for future gantries
- Speaker at Experimental and numerical investigation on losses in electrodynamic transients in a Nb3Sn prototype race-track coil
- Speaker at Modeling of AC losses in the CS and TF conductors for the ITER Project
Paul BRINDZA Jefferson Lab
- Speaker at Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab
Lucas Brower LBNL
- Speaker at Improved Modeling of Canted-Cosine-Theta Magnets
- Speaker at LEDET-ANSYS coupled modeling of transients in superconducting magnets
Pierluigi Bruzzone EPFL-CRPP
- Speaker at A Prototype Conductor by React&Wind Method for the EUROfusion DEMO TF Coils
- Speaker at Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
Chris Bumby Victoria University of Wellington
- Speaker at Temperature dependent behaviour of a barrel-type HTS dynamo
Ciro Calzolaio Paul Scherrer Institut
- Speaker at Subscale Setup for the Characterization of Mechanical Perturbances in CCT-Type High-Field Magnets
Donghui Cao School of Electrical and Information Engineering of Jiangsu University
- Speaker at New Modular Magnetic Equivalent Circuit of Dual-Permanent-Magnet-Excited Machine with Modulation Effect Consideration
Yi Cao University of Science and Technology of China
- Speaker at Tensile Strength of Fiber Reinforced Composites of EAST Cryogenic Axial Insulation Breaks
Quanliang Cao
- Speaker at Direct simulation of interactive motion of magnetic particles in an oscillating magnetic field
Quanliang Cao
- Speaker at Design, fabrication, and test of a dual-coil system for electromagnetic sheet forming
- Speaker at Electromagnetic-Structure Coupling Analysis of Transformers under Grounding Fault in 500 kV HVDC Converter Station
Sara Casalbuoni IBPT-KIT
- Speaker at Magnetic field measurements of full scale conduction cooled superconducting undulator coils
Francesca Cau Fusion for Energy
- Speaker at Development of a 2D simplified tool for the analysis of the cooling of the ITER TF winding pack
Sang Heon Chae Jeju National University
- Speaker at Transient Response Analysis on a 1.5-MW Class HTS Motor with Voltage Source Inverter under Electrical Fault Condition
Wan Kan Chan
- Speaker at Mechanisms to enhance stability, post-quench recovery and availability in non-insulated REBCO magnets
- Speaker at Toward using artificial neural network to predict the outcomes of PMP heat treatments in Bi-2212 wires
Zinour Charifoulline CERN
- Speaker at Resistance of splices in the LHC Main Superconducting Magnet Circuits at 1.9 K
joel Chavanne ESRF
- Speaker at Permanent Magnet Dipoles For the ESRF Upgrade
panpan Chen China electric power research institute
- Speaker at Experimental Study of Quench Performance for Superconducting Coil with YBCO Coated Conductors
Yunyun Chen
- Speaker at Electromagnetic Performance Analysis of Less-rare-earth Stator-partitioned Multi-excitation Flux-switching Machine Considering Multi-operation Conditions
Meng Chen
- Speaker at Electromagnetic Deep Drawing of Aluminum Cylindrical Cup with High Depth-diameter Ratio
Shunzhong Chen Institute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at A Simple and Convenient Test System for Superconducting Joints Based on Mini Liquid Helium Storage Tank
Hao Chen China University of Mining & Technology
- Speaker at 3D Electromagnetic Analysis of Tubular Permanent Magnet Linear Launcher
- Speaker at A transverse flux single-phase tubular switched reluctance linear motor
- Speaker at Analysis of Magnetic Polarity Distribution for a Dual-rotor Switched Reluctance Machine
- Speaker at Analytical Polynomial Models of Nonlinear Magnetic Flux Linkage for Switched Reluctance Motor
- Speaker at Electromagnetic Analysis on Dual-Stator Switched Reluctance Motor
- Speaker at Flux Characteristics Analysis of a Single-phase Tubular Switched Reluctance Linear Motor
- Speaker at Flux Characteristics Analysis of Single-phase Tubular Permanent Magnet Linear Motor
- Speaker at Novel U-shaped Structure Switched Reluctance Machine With a Module Outer Rotor
- Speaker at Thermal Analysis of Explosion-proof Switched Reluctance Machine
Junquan Chen Naval University of Engineering
- Speaker at The Estimation of AC Loss Range for Variable Speed PM Motor Based on Monte Carlo Method
Huang Chen
- Speaker at Electromagnetic Field Analysis of a Run - type High Temperature Superconducting Current Limiter Coil
Yuquan Chen
- Speaker at Design, fabrication and test of a 2 T superconducting dipole prototype by using tilted solenoids
jingping chen princeton plasma physics laboratory
- Speaker at 3D Stress-Strain Modeling of Nb3Sn wire
HUNG-CHIAO CHEN NSRRC
- Speaker at Injection control by neural network approach for Pulse-magnet of Taiwan Light Source
Lei Chen Wuhan University
- Speaker at Conceptual Design and Evaluation of a HTS Magnet for a SMES Used in Improving Transient Performance of a Grid-Connected PV System
- Speaker at Conceptual Design and Performance Evaluation of a 35 kV / 500 A Flux-Coupling-Type SFCL for Protection of a DFIG-Based Wind Farm
Yuan Chen
- Speaker at Prototype Design of the Dipole for EMuS at CSNS
S.D. Chen National Synchrotron Radiation Research Center
- Speaker at Improvement of Field Simulation Concept of Staggered Undulator with HTS YBCO Bulk
Wei Chen HUST
- Speaker at Design of prototype magnets for HUST Proton Therapy beamline
Long Chen Hebei University of Technology
- Speaker at Waveform conditioning problems in high frequency magnetization of nanocrystalline alloys
Qian Chen Jiangsu University
- Speaker at Design of Dual-Channel Switched Reluctance Motor for Safety-Critical Applications Using Two 3-Phase Standard Inverters
Da Cheng IHEP,CAS
- Speaker at Quench Protection System for a 12-T dipole magnet
Daniel Cheng
- Speaker at Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
Junsheng Cheng Institute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at Investigation of epoxy impregnated Nb3Sn superconducting coil for high field applications
Jiang Chengxi Huazhong University of Science and Technology
- Speaker at Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University
T.W. Ching University of Macau
- Speaker at A Superconducting Vernier Motor for Electric Ship Propulsion
T.W. Ching University of Macau
- Speaker at A Superconducting Linear Variable Reluctance Machine for Urban Transportation Systems
T.W. Ching Unversity of Macau
- Speaker at Quantitative comparison of wireless power transfer using HTS and copper coils
Suyeon Cho Korea Automotive Technology Institute
- Speaker at Developemt of Magnetic Coupled-Connectorless Power Transfer System
Sooyoung Cho Hanyang University
- Speaker at A study on the Novel Hybrid-Type Electric Retarder for Driving and Braking
- Speaker at Characteristic Analysis of Novel Outer Rotor Fan-type PMSM for Increasing Power Density
- Speaker at Coupled Electromagnetic-Thermal Analysis of the Permanent Magnet Synchronous Generator for using of VTOL UAV
- Speaker at Design and Analysis of Multi-Degree-of-Freedom Spherical Motor to Improve Output Torque
- Speaker at Design of Outer Non-Rare Earth Fan Type Permanent Magnet Synchronous Motor through Magnetic Equivalent Circuit Construction
- Speaker at Development of shot ball accelerator using coil gun principle for shot abrasive blasting processing
- Speaker at Magnetic Flux Estimation for Interior Permanent Magnet Synchronous Motor by using MRAC
- Speaker at Online Parameter Identification for IPMSM by Electric Torque Estimator
- Speaker at Analysis of magnetic flux density waveform distortion in sensor magnet for rotor position detection
- Speaker at Analysis of Unequal Magnetization of Ferrite Spoke-Type PMSM for Post-Assembly Magnetization
- Speaker at Design of Single-Phase Rotary Actuator for Gimbal System Considering Magnetic Saturation
Sukjin Choi IBS
- Speaker at The current status of magnet for IF(In-flight Fragment) separator of RISP
HyeWon CHOI CHOSUN University
- Speaker at Characteristics of superconducting coil-type DC Fault Current Limiter to increase stability in DC power system
Yojong Choi Yonsei University, Seoul, Korea
- Speaker at Quench protection method using dual-capacitor switching and RLC critically damped characteristic for large-scale superconducting magnets
Yoonhyuck Choi Korea university
- Speaker at A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
Kyeongdal Choi Korea Polytechnic University
- Speaker at Measurement of AC Losses of HTS Conductors on Round Core with Filamentary Strands
- Speaker at Characteristics Analysis of an HTS Homopolar Motor-Generator Set for DC to DC transformation
Jongho Choi Supercoil Co., Ltd.
- Speaker at [Invited] Recent Progress of Superconducting Induction Heater with HTS magnets in Korea
Inwoo Chun Korea University
- Speaker at Design of solenoid magnet for Large Acceptance Multi-Purpose Spectrometer of RISP
Daniel Ciazynski CEA-IRFM
- Speaker at ANALYSIS OF EARLY QUENCH DEVELOPMENT IN JT-60SA TOROIDAL FIELD COILS TESTED IN THE COLD TEST FACILITY
Ted Collings MSE, The Ohio State University
- Speaker at Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables
Guido Consogno WEKA AG
- Speaker at Design, Testing and Commissioning of 25.7 kA HTS Current Leads
Tim Coombs University of Cambridge
- Speaker at Ultra-high field HTS flux-pumped magnets
olivier cosson SIGMAPHI
- Speaker at Injection Kicker for HESR at FAIR using Semi-Conductor Switches
- Speaker at Static and transient magnetic design of a Septum magnet for ThomX accelerator
Chunyan Cui 1Institute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at Analysis of dynamic deformation and disturbing torque of superconducting spinning rotor
YingMin Cui North China Electric Power University
- Speaker at Stability simulation of a new ring-shaped YBCO coated conductor sheets magnet
Sebi Curreli Universita e INFN Genova (IT)
- Speaker at Electrical joints of pure aluminum stabilised sc conductors
Shaotao Dai Beijing Jiaotong University
- Speaker at Development of high-temperature superconducting magnet for 1MW induction heater
Yinming Dai 1Institute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at A Compact Test Bed for Critical Current Evaluation on High Temperature Superconducting Tape Samples
Chao Dai Institute of Plasma Physics, Chinese Academy of Sciences(ASIPP)
- Speaker at The impact of conductor Jacket material to the performance of Bi-2212 round wire
- Speaker at Uniaxial Strain Induced Critical Current Degradation of Ag-Sheathed Bi-2212 Round Wire
Michael Daly CERN
- Speaker at Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole.
Gabriele D'Amico Fusion For Energy
- Speaker at An Electromagnetic and Structural Finite Element Model of the ITER TF Coils
Quan Dao Van Changwon National University
- Speaker at Design of a high temperature superconducting magnet for a single silicon crystal growth system
Hu Daoyu Shanghai Jiao Tong University
- Speaker at Modeling and Validation of an HTS Partial Core Transformer
- Speaker at Performance Degradation of YBCO Tapes after Suffering Lightning Impulse Current
Timothy Davies University of Oxford
- Speaker at Lead-free persistent mode joints between NbTi wires
Sam Davis F4E
- Speaker at [Invited] JT-60SA Magnet System Status
Patrick Decool CEA
- Speaker at Completion of the French JT-60SA Toroïdal Field Magnet Contribution
Herbert De Gersem TU Darmstadt
- Speaker at Finite-element models for fast cycling magnets with homogenization of laminated yokes
Pavel Degtyarenko SuperOx
- Speaker at Superconducting properties of 2G HTS wires with artificial pinning centres fabricated using production scale PLD equipment
Ernesto De Matteis CERN
- Speaker at New method for magnet protection systems based on a direct current derivative sensor
Timophey Demikhov Lebedev Physics Institute
- Speaker at MRI scanner development in Russia
Le Deng
- Speaker at Modeling and Analysis of Parasitic Capacitance of High-Frequency High-Voltage Transformer Using Finite-Element Method
Fangxiong Deng
- Speaker at Principle and realization of an electromagnetic pulse welding system with a dual-stage coil
Xiaoyan Diao Jiangsu University
- Speaker at Decoupling Control of Bearingless Synchronous Reluctance Motor Based on Differential Geometry
- Speaker at Minimization design of torque ripple for bearingless synchronous reluctance motor
Dorus Dijkstra University of Twente
- Speaker at Detailed analysis of conduction-cooled MgB2 for use in superconducting magnetic density separation
Kaizhong Ding Institute of Plasma Physics, CAS
- Speaker at Development of 52 kA HTS Current Leads for the ITER CS Magnet Test Application
Yi Ding SINAP CAS
- Speaker at Test results of the first superconducting undulator prototype at the SSRF
tonghai ding Huazhong university of science and technology
- Speaker at Research of a new DC breaker based on the electromagnetic forming technology for Battery power supply of long pulsed magnet
Francesco Dioguardi DH Industries BV
- Speaker at Cool-down of LTS magnets by a closed loop helium gas flow
Aldo Di Zenobio ENEA
- Speaker at Design of the internal embedded joints for the EU DEMO TF coils
Ion Dobrin INCDIE ICPE-CA
- Speaker at CONCEPTUAL MODEL OF THE SOLENOID FOR THE SPIN PROGRAM AT NICA AND NUMERICAL MODELING OF THE MAGNETIC FIELD GENERATED
Manuel Angel Dominguez Martinez Ciemat
- Speaker at Design of a dipole with longitudinally variable field using permanent magnets for CLIC damping rings
Kun dong southeast university
- Speaker at A new all-superconducting electromagnetic launch system
- Speaker at Design and analysis of a coaxial-flux superconducting magnetic gear using superconducting bulk in halbach array
- Speaker at Hysteresis modeling of MgB2 using simplified Jiles-Atheron model
Jianning Dong Delft University of Technology
- Speaker at Analytical design of five-phase high speed axial flux permanent magnet machine for flywheel energy storage system
- Speaker at Nonlinear Modeling of Permanent Magnet Synchronous Machines Using Inverse Magnetization Lookup Tables
- Speaker at Optimal design of a surface-mounted PM motor with low torque ripple for robot joints
- Speaker at Thermal analysis of an axial flux PM machine with interactive reaction considerations
Yi Du Jiangsu University
- Speaker at A New Dual Stator Hybrid Excitation Flux Switching Machine with Iron Flux Bridge
- Speaker at A New Magnetic Field Modulation Type of Brushless Double-Fed Machine
- Speaker at A New Partitioned Stator Hybrid Excitation Flux Switching Motor with Ferrite Permanent Magnet
- Speaker at A New Partitioned Stator Hybrid Excitation Machine with Separated Field Sources and Armature Windings
Ho Ik Du Chonbuk National University
- Speaker at Study on the Transport Current Properties for the 2G HTS Wire Under the Spray Cooling Method
Wei Du Jinagsu university
- Speaker at Decoupling Control of Bearingless Permanent Magnet Synchronous Motor Using ANFIS Inverse System
Xiaoji Du Institute of Electrical Engineering, Chinese Academy of Science
- Speaker at Non-linear Magnetization Characteristic and Optimal Design of Iron-based superconducting Magnet for MRI
Nana Duan Xi'an Jiaotong University
- Speaker at Current Distribution Calculation of Superconducting Layer in HTS Cable Considering Magnetic Hysteresis by Using XFEM
Yujie Duan
- Speaker at Simulation of the delamination behaviors in the 2G HTS tape with consideration of thermal stress
Alexey Dudarev CERN
- Speaker at Magnet System for the BabyMIND Neutrino Detector at J-PARC
- Speaker at New Bridge Temperature Sensor for Superconducting Magnets and other Cryogenic Applications
Maria Durante
- Speaker at EuCARD2 Roebel-based cos-theta coil fabrication and magnet assembly validation
- Speaker at Tests in Standalone Mode of the EuCARD 5.4-T REBCO Dipole Magnet.
Mariam Elshiekh University of Bath
- Speaker at Effectiveness of Superconducting Fault Current Limiting Transformers in Power Systems
Anna Encheva ITER Organization
- Speaker at Status of the ITER In-vessel Coils System and Progress on the Qualification of the In-Vessel Coil Conductor
Shun Enomoto KEK
- Speaker at Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
Pasquale Fabbricatore Universita e INFN Genova (IT)
- Speaker at Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC
chunhua fang
- Speaker at Simulation Analysis of Typical Defects on superconductor cable
Chao Fang
- Speaker at Hot cracking in laser welding with filler wire of ITER grade austenitic stainless steel
Xiao Fang Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology
- Speaker at Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair
Sandor Feher Fermi National Accelerator Lab. (US)
- Speaker at Mu2e Solenoid Field Mapping System Design
- Speaker at Operational Experience with the MICE Spectrometer Solenoid System
Helene Felice CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR)
- Speaker at Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC
Jose Ferradas Troitino Centro de Investigaciones Energéti cas Medioambientales y Tecno
- Speaker at Applied metrology in the production of superconducting model magnets for particle accelerators
Michael Field Bruker OST
- Speaker at Nb3Sn strand designs and heat treatments for high field magnet applications
Walter Fietz Karlsruhe Institute of Technology
- Speaker at Development of small diameter HTS Cross Conductors for Fusion Magnet Application
Lucio Fiscarelli CERN
- Speaker at A Translating-Coil Magnetometer for Measuring Integral and Local Field Distributions in Large-Aperture Dipoles
- Speaker at Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC
- Speaker at Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
Arnaud Pascal Foussat CERN
- Speaker at Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement
shanshan fu China electric power research institute
- Speaker at Numerical Study on Electro-thermal Characteristics of Core Cable Consisted Of YBCO Coated Conductor
Hiroyuki Fujishiro Iwate University
- Speaker at Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization
Sho Fujiyama Sophia University
- Speaker at Evaluation of Voltage between Conductors for Resonance Phenomenon and Transient Response in JT-60SA Central Solenoid
Satoshi Fukui Niigata University
- Speaker at Development of Test Device for Aluminum Metal Melting by Electromagnetic Induction Heating Using HTS Coils
Yusuke Fukumoto Railway Technical Research Institute
- Speaker at Basic study of superconducting coils in rectifier transformers for railway electrification system
Yasuhiro Fuwa Kyoto University
- Speaker at Cryogenic Hybrid Magnet with Praseodymium Permanent Magnet
- Speaker at Improved Design of Klystron Beam Focusing System with Permanent Magnets
Yuanwen Gao Lanzhou University
- Speaker at Mechanical–electric Model for Multifilament Composite Superconducting Strands
Yuting Gao Huazhong University of Science and Technology
- Speaker at Irreversible permanent magnet demagnetization analysis of C-core flux reversal machines
Jesus Angel Garcia Matos
- Speaker at Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
Bernard Gastineau CEA Sacaly
- Speaker at Commissioning of the R3B-Glad superconducting dipole magnet
Andrey Gavrilin Florida State University, Florida, USA
- Speaker at Energy and material efficient non-circular bore Bitter magnets
- Speaker at The latest observations from results of comprehensive computer simulation of the NHMFL all-superconducting 32T magnet quench tests
Meng Ge Huazhong University of Science & Technology
- Speaker at A Synthetic Frozen Permeability Method to Separate PM torque in Hybrid Permanent Magnet Variable-Flux Machine
Jianzhao Geng University of Cambridge
- Speaker at Thermal analysis for a fast AC field controlled HTS switch for flux pumps
- Speaker at A novel HTS Persistent Current Switch Controlled by AC Magnetic Field
Probir Ghoshal Jefferson Lab
- Speaker at Commissioning of the CLAS12 Torus Detector Magnet at Jefferson Laboratory
- Speaker at Instrumentation and Control Selection for the Hall-B Superconducting Magnets at Jefferson Lab
Woosik Gil Karlsruhe Institute of Technology (KIT)
- Speaker at Quench Detection Performance of the Magnet Safety System for the inductively coupled KATRIN Source Magnets
Byeong-Soo Go Changwon National University
- Speaker at A performance study on the flux pump based modularized exciter for a large-scale HTS wind power generator
- Speaker at Design and structural analysis of induction type coilgun system
Fatima Gomez De La Cruz CERN
- Speaker at The Automatic Quench Analysis Software for the High Luminosity LHC Magnets Evaluation at CERN
Fedor Gömöry Slovak Academy of Sciences
- Speaker at Role of electrostatic charges in the calculation and measurement of AC losses in superconducting coils.
Adrian Gonzalez-Parada University of Guanajuato
- Speaker at Optimization of HTS coils for the design of a linear generator for maritime applications
Adrian Gonzalez-Parada Universidad de Guanajuato-DICIS
- Speaker at Analysis of a linear electric generator design using superconducting material
Thomas Gradt Federal Laboratory for Materials Research (BAM)
- Speaker at Friction-coefficient between the Ti6Al4V loading pole and the 316LN steel shims of the HL-LHC 11 T magnets
Andreas Grau IBPT-KIT
- Speaker at Full Scale Conduction Cooled Superconducting Undulator Coils – Training, Stability and Thermal Behavior
Michael Green LBNL & FRIB/MSU
- Speaker at A Preliminary Design of a Test Facility for testing 20 kA Nb3Sn Cables in a Magnetic Field up to 15 T that is cooled using Small Cryogenic Coolers
- Speaker at Quench Protection Solutions for Magnets fabricated with HTS Conductors
Carolyn Grimley North Carolina State University
- Speaker at Field-assisted Joining of (RE)Ba2Cu3O7-x Coated Conductors
Mingzhi Guan Institute of Modern Physics, Chinese Academy of Sciences
- Speaker at Dynamic strain characteristics and responds in a LTS sextupole magnet during excitation and spontaneous quench
- Speaker at Stress-strain behaviors of a Nb3Sn Superconducting prototype solenoid for ECR magnet during winding, cooldown and energizing processes
Wang Guangda HUST
- Speaker at The Effect of Turn-to-Turn Contact Resistance on the Electrical and Mechanical Characteristics of 2G HTS Pancake Coils
Qiang Guo Western Superconducting Technologies.,Ltd
- Speaker at The influence of heating treatment on NbTi superconducting wires with Cu5Ni alloy matrix
Rong Guo School of Electrical Engineering, Southeast University
- Speaker at Design and Analysis of an Arc-teeth Permanent Magnet Linear Synchronous Motor for Direct-drive Application
- Speaker at Polar transformed subdomain modeling for primary-segmented permanent magnet linear synchronous machine applied in tracked inspection robots
- Speaker at A Field Modulated Linear Permanent Magnet Generator for Direct-Drive Wave Energy Conversion
- Speaker at Design and Analysis of Marine Current Power Generation System Based on a Magnetic Gear
- Speaker at Design of the high power density permanent magnet synchronous linear motor with water cooling structure in the end windings
- Speaker at Magnetic field distribution prediction of a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Speaker at Research on a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Speaker at Research on the linear tubular motor with multilayer flux-concentrating permanent magnets for direct-drive ocean wave conversion
- Speaker at Research on the thermal characteristics of permanent magnet linear motor operated in short-time duty cycle
- Speaker at Study on a Novel Transverse-flux Tubular Linear Permanent-magnet Generator for Stirling Engine
Zhang GuoMin Institute of Electrical Engineering Chinese Academy of Science
- Speaker at Asymmetry in wireless power transfer between a superconducting coil and a copper coil
Ramesh Gupta BNL
- Speaker at Design, Construction and Test of HTS/LTS Hybrid Dipole
- Speaker at High Field, Large Aperture HTS Solenoid for Axion Dark Matter Search
Roland Gyuráki Karlsruhe Institute of Technology
- Speaker at High-speed thermal imaging of quench propagation in HTS tapes using temperature-sensitive fluorescent films
Seungyong Hahn Seoul National University / National High Magnetic Field Lab.
- Speaker at Overview of Recent Progress in No-Insulation REBCO Magnet Research
Ding Haifei Jiangsu University
- Speaker at Optimization Design of Bearingless Synchronous Reluctance Motor
TAEHEE HAN Jungwon University
- Speaker at Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiter (SFCL) due to Winding Direction of Additional Secondary Winding
Wonseok Han Sungkyunkwan University
- Speaker at Structural Design Methodology of BLDC Motor Considering Response Time of Phase Current
Houxiang HAN
- Speaker at Winding R&D for CFETR Central Solenoid Model Coil
Ke Han Nationa High Magnetic Field Laboratory
- Speaker at High Modulus Reinforcement Materials
- Speaker at Particle Reinforced Cu Matrix Conductors for High Field Pulsed Magnets
Seunghak Han Yonsei University
- Speaker at Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
Changhong Hao Tsinghua University
- Speaker at Conceptual Design of the Suspension Structures for High-temperature Superconducting Magnets Deployed in Mobile Platforms
Li Hao
- Speaker at A Multi-Tooth Axial Field Flux-Switching Hybrid Excitation Machine
- Speaker at Influence of Stator Structure on the Static Characteristics in Axial Field Flux Switching Permanent Magnet Machine
Shin Hasegawa Graduate school of Tohoku University
- Speaker at Numerical and Experimental Evaluations of the Quench Detection Performance of NbTi/YBCO Hybrid Tape
Reinhard Heller Karlsruhe Institute of Technology
- Speaker at Overview of JT-60SA HTS current lead manufacture and testing
Tsutomu Hemmi National Institutes for Quantum and Radiological Science and Technology
- Speaker at Study of bending behavior in Nb3Sn strands
- Speaker at Winding Deformation Caused by Reaction Heat-treatment for ITER TF coil
Kohei Higashikawa Kyushu University
- Speaker at Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament
Romain Hild IRMA Strasbourg
- Speaker at Towards real time computation of 3D magnetic field in parametrized Polyhelix magnets using a reduced basis Biot-Savart model
David K. Hilton, Ph.D. National High Magnetic Field Laboratory (NHMFL-FSU)
- Speaker at Design of a Magnet Bore Field Mapper Consisting of a Cylindrically Fixed Array of Inexpensive Hall Elements to Probe Low-Order Spherical Harmonics in Real Time
Yoshimitsu Hishinuma National Institute for Fusion Science
- Speaker at Changes of superconducting properties due to the unidirectional tensile deformation on bronze-processed Nb3Sn multifilamentary wires using various Cu-Sn-Zn ternary alloy matrices
Eddie Frank Holik
- Speaker at Two-layer 16 Tesla cosθ dipole design based on MQXF Low-Beta Quadrupoles
mikael holm Luvata Pori Oy
- Speaker at Low loss NbTi Superconducting Wires for the SIS100 Main Magnets made by Luvata
Yanbing Hou North China Electric Power University
- Speaker at Thermal Stable Analysis on Superconducting Magnet stacked by REBCO Annulus Plates
qingyu hu
- Speaker at Stability of Superconducting Magnet and Wire Insulations
Xinning Hu 1Institute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at Design and Test of a superconducting levitation system for gravity measurement
Qiang Hu China
- Speaker at Eddy currents analysis of dipole magnets of booster ring at HIAF project
- Speaker at Strain response of superconducting magnets during excitation and quench training based on FBG and cryogenic strain gauge measurements
Hailin Huang
- Speaker at Analysis and application of discrete Halbach magnet array with unequal arc lengths and unequally-changed magnetization directions
Yongheng Huang Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology
- Speaker at Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field
- Speaker at Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field
Yujie Huang Huazhong University of Science and Technology
- Speaker at Design and implementation of a flexible pulsed electromagnetic blankholder system for electromagnetic forming
Jianfeng Huang University of Twente
- Speaker at Pulsed field stability and AC loss of ITER NbTi PF joints by detailed quantitative modeling
Yawei HUANG CEA Saclay
- Speaker at Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
Zhen Huang Shanghai Jiao Tong University
- Speaker at 3D modeling of HTS bulk array used on the rotor by finite element software
- Speaker at Experimental and numerical analysis of quench characteristics on a HTS coil by fault disturbance in HTS generator
Jui-Che Huang National Synchrotron Radiation Research Center
- Speaker at The phase error issue for an accelerator undulator
Taotao Huang HTS-110 Ltd
- Speaker at A passively shielded HTS magnet for polarized neutron scattering
Xiongyi Huang
- Speaker at Progress of ITER Feeder System Electrical Insulation Qualification
yalan huang sichuan university
- Speaker at Step-current method for improving energy storage density of superconducting magnet
Wenmei Huang Key Laboratory of Electro-Magnetic Field and Electrical Apparatus Reliability of Hebei Province
- Speaker at Research on Temperature Rise and Temperature Control for Giant Magnetostrictive Transducer
lantao huang
- Speaker at Analysis and Optimal Design of the Transmission Coils for the Wireless Power Transmission System
- Speaker at Design and Optimization of a Multi-pulse Electromagnetic Deep Drawing System
Lei Huang Southeast University
- Speaker at Design and Analysis of a Transverse Flux Hybrid Field Modulated Linear Generator for wave energy conversion
- Speaker at Research on a Coreless Superconducting Linear Machine for Electromagnetic Catapult
- Speaker at Research on an Asymmetric-primary Hybrid-excitation Maglev Axis-flux Generator for the Vertical Axis wind Turbine
Yu Hui Institute of Electrical Engineering Chinese Academy of Science
- Speaker at Asymmetry in wireless power transfer between a superconducting coil and a copper coil
Seonho Hwang Chosun university
- Speaker at Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter
Young Jin Hwang Korea Basic Science Institute
- Speaker at Feasibility Study on a Multi-pole Electro-magnet using Parallel Iron-core Structure
- Speaker at Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
Yo Han Hwang Hanyang University
- Speaker at A Study on the Auto-MTPT Algorithm to Make the Speed-based Current-map of IPMSM for Traction of Inwheel
- Speaker at HEV Motor Comparison of IPMSM with Sintered Rare-Earth Mangnet and Bonded Dy Free Injection Magnet in the Same Size
Chang Ju Hyeon Jeju National University
- Speaker at Design and Analysis on Main Shaft of Megawatt-Class HTS Synchronous Motor Considering Three-Phase Sudden Short-Circuit Fault Condition
Momoe IDE Tohoku University
- Speaker at Influence of local critical current degradation on quench characteristics of a ReBCO coil
Masahide Iguchi National Institutes for Quantum and Radiological Science and Te
- Speaker at Progress of ITER TF Coil Case fabrication in Japan
Kenichi Ikeda Kyoto University Graduate School
- Speaker at AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor
Yury ILIN ITER IO
- Speaker at Qualification Program of Joints for ITER Coils
Shinsaku Imagawa National Institute for Fusion Science
- Speaker at Experimental study on the effect of twisting on critical currents of Nb3Sn cable-in-conduit conductors
- Speaker at Test of ITER-TF joint samples with NIFS test facilities
Keisuke Ishida
- Speaker at High-gradient magnetic separation properties of rice hull magnetic activated carbon for water clarification
Atsushi Ishiyama Waseda University
- Speaker at Reduction effect of irregular magnetic field due to screening-current in copper-plated mutifilamentary REBCO tape
Satoshi Ito Tohoku University
- Speaker at Electro-mechanical measurements of mechanical lap joint of HTS STARS conductors
tetsuya ito Kyushu University
- Speaker at AC Loss Properties of Stacked Multifilamentary REBCO Superconducting Tapes
Ilia Ivashov Forschungszentrum Jülich GmbH
- Speaker at Optimization of structural performance of the toroidal field coil system of a tokamak
Sadanori Iwai Toshiba Corporation
- Speaker at AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration
- Speaker at Racetrack-shaped large single pancake coils wound with 1 km-long REBCO-coated conductors
- Speaker at Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm
Susana Izquierdo Bermudez CERN
- Speaker at Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Speaker at Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
Jang Jae Young Korea Basic Science Institute
- Speaker at Optimal Design of the LTS Magnet employing Genetic Algorithm for EMPS
- Speaker at Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
Gang-Hyeon Jang Chungnam National University
- Speaker at Capability improvement design method considering eddy current loss reduction of axial-flux permanent magnet coupling with Halbach array structure using 3-D FEM.
- Speaker at Improved Design and Characteristic Analysis of Permanent Magnet Synchronous Generator for Wind Power Generation with Fractional Slot and Integer Slot
Mark Jaski Argonne National Laboratory
- Speaker at Eight-Piece Quadrupole Magnet Allows Precise Pole Tip Positioning
Patrice Jehanno
- Speaker at Static and transient magnetic design of a Septum magnet for ThomX accelerator
Haeryong Jeon Yonsei University
- Speaker at Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
In-Sung Jeong Chosun University
- Speaker at Characteristics of SWPT according to the number of transmitting and receiver coils.
Geochul Jeong
- Speaker at A Study on Analytical Methods of FEM-based Edge Heating System
Geochul Jeong
- Speaker at A Study on the Design of IPMSM for Reliability of Demagnetization Characteristics-based Rotor
Bolei Jia Shanghai Institute of Applied Physics, Chinese Academy of Scie
- Speaker at DESIGN STUDY OF AN OCTUPOLE SCANNING MAGNET FOR SPOT SCANNING IN PROTON THERAPY
- Speaker at THE SCANNING MAGNETS FOR PROTON THERAPY AT SAPT
Zhu Jiahui
- Speaker at Characterization of an internal cooling high temperature composite superconductor with REBCO for large scale energy storage applications
Junjie Jiang Shanghai Jiao Tong University
- Speaker at Comparison of HTS Quench detection methods based on Spontaneous Raman and Rayleigh Scattering in Optical Fibers
Jiaming Jiang
- Speaker at A Novel Flux-Focusing Doubly Salient Memory Machine
- Speaker at A Novel Partitioned Stator Flux-Reversal Memory Machine
- Speaker at A Novel Salient-Pole Hybrid Excited Vernier Permanent-Magnet Machine for Direct-Drive Application
- Speaker at Design and Analysis of Variable Flux Halbach Memory Machine
- Speaker at Design of Asymmetric Arc Linear Permanent-Magnet Synchronous Motor for Large Telescope-Drive Application
- Speaker at Optimization Design and Characteristics Investigation of Fractional Slot Concentrated Winding Pole-Phase Modulation Memory Machine
- Speaker at Optimization Design of a Permanent Magnetic Actuator for 126kV Vacuum Circuit Breaker
- Speaker at Reliability-Based Optimization of a Permanent Magnetic Actuator for Vacuum Circuit Breaker Considering Demagnetization Effect
Yapeng Jiang
- Speaker at Frequency and Time Domain Homogenization Model of Multistrand Windings based on Finite Element Method
Fan Jiang
- Speaker at Electromagnetic Design and Multi-physical Modeling of a 100-T Triple-coil Pulsed Magnet System
- Speaker at Study of Fatigue Behavior of Unidirectional Zylon/epoxy Composite Used in Pulsed Magnets
Li Jianwei
- Speaker at Test of the SMES working as a Power Buffer in a Multiple DC Distribution Power Network by Using the Real Time Digital Simulator
Marc Jimenez Fusion For Energy
- Speaker at Simulation of the ITER Toroidal Field Coil Case welding distortion using Finite Element Method
Shi Jin Shenyang University of technology
- Speaker at Design for high speed permanent magnet electrical machine with power loss research
Shi Jin Shenyang University of Technology
- Speaker at Direct power control based on SVPWM for open-winding BDFG in wind power application
- Speaker at Study on fault-tolerant control of open-winding brushless doubly-fed wind power generator
- Speaker at Electromagnetic and Thermal Calculation Research on Brushless Doubly Fed Machine With Hybrid Rotor
- Speaker at Rotor Losses Research of Brushless Doubly-fed Machine with Hybrid Rotor
- Speaker at Rotor Structure Design and Optimization of MW-class Brushless Doubly Fed Generator for Offshore Wind Turbine
Huan Jin
- Speaker at Mechanical properties of aged 316LN butt-welding joint at cryogenic temperature for CFETR CS model coil
Chang-Sung Jin Hanwha Techwin
- Speaker at Estimation of Permanent Magnet Temperature using d-axis Current for IPMSM
- Speaker at Proposed Commutation Method for Performance Improvement of Brushless DC Motor
Xinzhe Jin Muroran Institute of Technology
- Speaker at Measurement of persistent current Gd123 coil for superconducting joint fabricated by CJMB method
Libing Jing
- Speaker at Investigation of SMPM Motor with Segmented Eccentric Magnet Pole
- Speaker at Optimal and Analysis of Double-Rotor Permanent Magnet Motor with Halbach Array
Young-Sik Jo Korea Electrotechnology Research Institute
- Speaker at HTS Magnet with Smart Insulation Method
Hyun Chul Jo IBS
- Speaker at Development Status of High-Tc Superconducting Quadrupole Magnet for the In-flight Fragment Separator of RISP
Younjung Jo Kyungpook National University
- Speaker at Strong flux pinning caused by phase distribution characteristics in (Ba, K)Fe2As2 films
Adam Johnstone Siemens Healthcare
- Speaker at Development of a 1.5 Tesla whole-body MRI Magnet with a very low helium inventory
Kyoung-Jin Joo
- Speaker at Air-gap Control for Superconducting-Hybrid Magnetic Levitation Systems via Linear Matrix Inequality Optimization
- Speaker at Nonlinear Sensorless Control including Zero Speed of Permanent Magnet Synchronous Motor Drives
- Speaker at Torque Actuator Control considering Nonlinearity of Magnetic Saturation
- Speaker at A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system
- Speaker at A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system
- Speaker at Advanced Maximum-Power Control for BSG System of Asymmetrical Six-Phase WRSM Considering Start- Mode
- Speaker at Novel Control Strategy of Wave Energy Converter using Linear Permanent Magnet Synchronous Generator
- Speaker at Torque Control of IPMSM considering actual controller and driving condition
Piyush Joshi Brookhaven National Laboratory
- Speaker at 24kA DC Energy Extraction Switch for LARP Magnet Testing at BNL
- Speaker at LTS-HTS Hybrid Dipole Magnet Quench Protection System
Mariusz Juchno CERN
- Speaker at Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
Byung-Hyuk Jun Korea Atomic Energy Research Institute
- Speaker at Defect formation and improved critical current density in YBCO superconducting films by electron beam irradiation
Hyun-Woo Jun Hanyang University
- Speaker at Design of maximum power density of TVC driving motor for space launch vehicle considering space environment
- Speaker at Output characteristic improvement of brushed reluctance motor through asymmetric slot structure
Soo-Jin Jung LG Electronics
- Speaker at Comparison of output characteristics of PMSM for EV according to water cooling and oil cooling
BYUNGIK JUNG Dongkang University
- Speaker at Analysis of recovery characteristics of the SFCL applied to DC power system
Zheng Junqiang Jiangsu university
- Speaker at Effect of Multi-phase Winding on Surface Permanent-Magnet Machine with Low Space Harmonics for Electric Steering Gear
Francois-Paul Juster CEA
- Speaker at Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results
Stephen Kahn Muons, Inc.
- Speaker at Construction and Testing of Curved ReBCO Coils
Zhang Kai IHEP
- Speaker at 3D mechanical design and analysis of 20-T twin-aperture common-coil accelerator dipole magnet
- Speaker at Assembly and test of the support structure for the subscale dipole magnet FECD1
Kazuhiro Kajikawa Kyushu University
- Speaker at Suppression of Flux Creep in HTS Coil by Applying Low AC Magnetic Field
Hideki Kajitani National Institutes for Quantum and Radiological Science and Te
- Speaker at New inspection method of joint resistance at room temperature for ITER TF Coil
Hiroharu Kamada Meiji University
- Speaker at Test Winding of a 1-T Class Force-Balanced Coils Using High Temperature Superconducting Tapes
Changtao Kan North China Electric Power University
- Speaker at AC Loss of a Quasi-isotropic Strand Stacked by 2G Wires by Numerical Simulation in Cryogenic Temperature
Wen Kang Institute of High Energy Physics (IHEP)
- Speaker at Status of Magnet System for CSNS RCS
Min Hyeok Kang Jeju National University
- Speaker at Comparative Analysis of Electromagnetic Characteristics for HTS Motor Considering PWM Schemes in Voltage Source Inverter
Min Kang Zhejiang University of Science and Technology, Hangzhou, China
- Speaker at Analysis of Magnet Structure in a Multiphase Permanent Magnet Motor Considering Open Phase Fault-Tolerant Operation
Dong-Woo Kang Keimyung University
- Speaker at Research on demagnetization-resistant structure of synchronous motor performance using Nd-permanent magnets reduced heavy rare earth metals
- Speaker at Study on Vibration Characteristics of Permanent Magnet Synchronous Motor with Demagnetization of Permanent-magents
Tomoharu Karashima Kyoto University
- Speaker at Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor
Anna Kario KIT
- Speaker at Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet.
Sergey Karpov Budker Institute of Nuclear Physics
- Speaker at Indirectly cooled superconducting power supply for the CMD-3 thin solenoid
VLADIMIR KASHIKHIN Fermilab
- Speaker at Design of Iron Dominated HTS Quadrupole Magnet with Circular Coils
- Speaker at Superconducting Magnet Performance in LCLS II Cryomodule Prototype
- Speaker at Performance Comparison of the Splittable Quadrupoles for LCLS-II
Masahiro Kato Tohoku University
- Speaker at Influence of bolt positions and electrode structure in Yoroi-coil structure on stress distribution in an HTS coil winding
Shuma Kawabata Kagoshima University
- Speaker at AC Loss Measurement of High-Tc Superconducting Coils Wound by Stacked Conductors under the Various Electro-magnetic Conditions
Akifumi Kawagoe Kagoshima University
- Speaker at Diagnosing The Critical Current of Winding in the High Temperature Superconducting Transformer by Pick-up coil pairs: Experiments to Confirm The Principle of Diagnosing Method on The 1-Turn Sample Coil
Takeshi Kawashima Kyoto University
- Speaker at Magnetic Field Stability Improvement of HTS-MRI Magnet under Power Supply Driven Operation with a Micro Current Trimming Control
Mario Kazazi Cea Saclay
- Speaker at A device for characterizing the circumferential strain dependence of the critical current in MgB$_{2}$ wires and tapes
Juergen Kellers ECO 5 GmbH
- Speaker at Development of a Superconductive Wind Power Generator within the EcoSwing project
Hamlet Khodzhibagiyan Joint Institute for Nuclear Research
- Speaker at Status of manufacturing and testing of superconducting magnets for NICA and FAIR projects
Hyungjun Kim ITER Organization
- Speaker at Manufacturing and Qualification Test of ITER Busbar Joint
Chang-Woo Kim Chungnam National University
- Speaker at Characteristic Analysis of Permanent Magnet Generator considering Magnet Pole Shape and Skew Effects by using Analytical Method
- Speaker at Core Loss Analysis of Permanent Magnet Linear Synchronous Generator with Slotless Stator
- Speaker at DESIGN CRITERIA FOR HIGH-SPEED PERMANENT MAGNET SYNCHRONOUS MOTORS CONSIDERING ROTOR MAGNET AND SLEEVE MATERIAL
- Speaker at Design of hybrid thrust magnetic bearing for heavy rotating shaft considering self-weight compensation according to axial load
- Speaker at Integrated Motor Propulsor Magnet Design with Hybrid Halbach Array for Torque Ripple Reduction
- Speaker at STUDY ON CORRELATION BETWEEN ROTOR VIBRATION AND MECHANICAL STRESS IN ULTRA-HIGH-SPEED PERMANENT MAGNET SYNCHRONOUS MOTOR
Hyung-Wook Kim Korea Electrotechnology Research Institute
- Speaker at 2G HTS Magnet Stability Improvement via V2O3 Material and perforated HTS Wire
Jimin Kim Department of Materials Science and Engineering, Korea University, Seoul, Korea
- Speaker at A Study on Thermal and Electrical Characteristic of Metallic Cladding GdBCO Coil
Kwangmin Kim National High Magnetic Field Laboratory
- Speaker at Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
Jin-Seok Kim Seoil Univ.
- Speaker at Study on Operation Charactersitcis with Flux-Lock Type SFCL considering Interruption of Circuit Breaker in Power Distribution System
Young-Gyun Kim Korea University
- Speaker at Design Options of a 3-T 900-mm Whole Body MRI Magnet with Selected Commercial MgB2 Wires
- Speaker at Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Speaker at Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet
- Speaker at Quench and Recovery Characteristics of MgB2 Coil with Various Protection Schemes
Do Gyun Kim IBS
- Speaker at Development of Prototype LTS Quadrupole Magnet Triplet for IF Separator of RISP
JunBeom KIM CHOSUN University
- Speaker at Characteristic analysis of SFCL DC interrupting system in Windfarm
Sung-Kyu Kim Korea Electrotechnology Research Institute
- Speaker at Design and Performance Evaluation of a Large-scale HTS DC reactor for Bulk-Power Transmission
Hyun mi Kim Sungkyunkwan University
- Speaker at Characteristic Analysis of Permanent Magnet Synchronous Machine Considering Combination of Time Harmonics
Won-Ho Kim Gachon University
- Speaker at A Study on the New Skew Methodology by Cross-Stacking in Spoke type Ferrite Magnet Motor
- Speaker at A Study on the Selection of the Optimal Number of Poles for Maximizing the Magnetic Flux of Spoke type Permanent Magnet Motor
- Speaker at Effect of Pole and Slot Combination on Vibration of Spoke-Type Permanent Magnet Motors
- Speaker at Methodology of Incorporating Mechanical and Electromagnetic Characteristics Analysis for Separated Pole-Piece Type Ferrite Magnet Motor
Jaemin Kim SuNAM Co., Ltd.
- Speaker at Design, Fabrication, and Test Results of an 18 T Metal Cladding GdBCO Magnet for Axion Detector
Jiman Kim Department of Materials Science and Engineering, Korea University, Seoul, Korea
- Speaker at A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand
- Speaker at Design and Performance Results of Optimal Vapor-Cooled MgB2 Current Leads for a 1.5 T MRI Magnet
Junseong Kim Yonsei Univ.
- Speaker at Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet.
A-Rong Kim Research Institue of industrial Science & Technology (RIST)
- Speaker at A method of critical current measurement for HTS tape using pulsed current
Jin-Seok Kim SUNGKYUNKWAN UNIVERSITY
- Speaker at Numerical Analysis and Design of SPM Type Variable Flux Memory Motor Considering Magnetization and Demagnetization Characteristic of Permanent Magnet
YC Kim Hanyang University
- Speaker at The Investigation of Cogging Torque Reduction Technologies
SU YONG KIM Korea/KETI
- Speaker at A Study for Flux-Variable Memory Motor Depending on the Position of the Permanent Magnets
- Speaker at Study on Integral Transformer / Reactor for Improving Power Density
Ji Hyung Kim Jeju National University
- Speaker at 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Speaker at Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials
Jinsub Kim Yonsei university
- Speaker at Study on the quench detection for the KSTAR PF Coils considering Varying Inductances caused by weak ferromagnetic CICC jackets
Dae-Woo Kim SUNGKYUNKWAN UNIVERSITY
- Speaker at Design of Vernier Motor considering Irreversible Demagnetization in Permanent Magnet
Myung Su KIM Korea Basic Science Institute
- Speaker at Development of Vapor-cooled Current Leads for LTS magnet in the EMPS
Sung-Jin Kim Chosun University
- Speaker at Optimization of the Pole Piece in Coaxial Magnetic Gears for Transfer Torque Ripple Improvement
SeokBeom Kim Okayama University
- Speaker at Characteristics of current bypassing and transient stability in partial insulation HTS coils
- Speaker at Development of HTS bulk NMR relaxometry with ring-shaped iron rings
Su-Hun Kim Kyungpook National University
- Speaker at Cryogen Recondensed Cooling System for Electron Beam Ion Source Employing 7 T Superconducting Solenoid Magnet
- Speaker at Development of 7 T superconducting solenoid magnet for Electron Beam Ion Source
Youngjae Kim NHMFL/ASC
- Speaker at Stress and Strain Management of a Solenoid Coil Wound with Overpressure Processed Rectangular Bi-2212 Wire with Metallic Reinforcement Lamination
Gwan tae Kim Korea Electrotechnology Research Institute
- Speaker at The effect of compositional ratio of SmBCO coated conductor on the superconducting properties.
Glyn Kirby CERN
- Speaker at Design Study of a Novel, LHC High-Lumi CCT Orbit Corrector.
- Speaker at Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Speaker at HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
Takanobu Kiss Kyushu University
- Speaker at In-field Characterization of Local Ic and n-indices as a Function of Longitudinal Coordinate in a Long-length GdBCO Coated Conductor
Evgeny Klimenko SSI TRINITI
- Speaker at LAMINAR SUPERCONDUCTING WINDINGS
Rock-Kil Ko Korea Electrotechnology Research Institute
- Speaker at Repair method of locally defective or damaged coated conductor using the superconducting patch
- Speaker at Robust REBCO coated conductor with meatal stitching stabilizer
Rakkyung Ko Korea University
- Speaker at Capacity Allocation of a Superconducting Flywheel Storage System (SFES) in Hybrid Energy Storage System for Wind Generation
Norikiyo Koizumi National Institutes for Quantum and Radiological Science and Technology
- Speaker at Series Production of ITER TF Coil Winding Pack in Japan
- Speaker at Current Center Line Measurement of ITER TF Coil
Charilaos Kokkinos FEAC Engineering P.C.
- Speaker at FEA Model and Mechanical Analysis of the Nb3Sn 15 T Dipole Demonstrator
- Speaker at High Gradient Nb3Sn Quadrupole Demonstrator MKQXF Engineering Design
yong kong
- Speaker at Design and Analysis of Outer-Rotor Permanent Magnet Synchronous Machine With Amorphous Stator Core
m Koratzinos Universite de Geneve (CH)
- Speaker at A novel method for greatly reduced edge effects design in CCT magnets
Jaap Kosse
- Speaker at A Superconducting Magnetic Density Separation Laboratory Demonstrator
Pavol Kovac Institute of Electrical Engineering of SAS
- Speaker at MgB2 cables from wires made PIT and IMD process.
Chris Kovacs The Ohio State University
- Speaker at An Experimental Stability Diagram for ReBCO Roebel Cables at 4.2 K and Applied Fields up to 12 T
- Speaker at Single-strand excitation for examining current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla
Kei Koyanagi TOSHIBA Corporation
- Speaker at Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments
Sergey Kozub State Res.Center of Russian Feder. Inst.f.High Energy Phys. (IFVE)
- Speaker at Fast Cycling Superconducting Quadrupole
Steve Krave Fermilab
- Speaker at Fabrication and Measurement of New Inflector for g-2
Guangli Kuang
- Speaker at The hybrid magnet at CHMFL
Wouter Kühlkamp University of Twente
- Speaker at Quench protection of an MgB2-based MDS magnet system
Cheng-Ying Kuo NSRRC
- Speaker at Design of a Short Period Permanent Magnet Helical Undulator
- Speaker at Low temperature Hall probe calibration system for the TPS cryogenic permanent magnet undulator
- Speaker at The Design of Magnetic Needles for Improving Magnetic Field Measurement System
Ik-Soo Kwon Department of Electronic System Engineering
- Speaker at Determination of Threshold Electric Field for PPLP Specimen in Liquid Nitrogen Based on the Measurement of Electrical Conductivity
Radcliff Kyle Applied Superconductivity Center-NHMFL
- Speaker at Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K
Friedrich Lackner CERN
- Speaker at Fabrication and assembly of the shell-based structure for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the HL-LHC
- Speaker at Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
Benoit LACROIX CEA
- Speaker at QUASI 3D THERMAL SIMULATION OF JT-60SA TF COIL TESTED IN CTF - ANALYSIS OF QUENCH INITIATION SEQUENCE
Zhipeng Lai Huazhong University of Science and Technology
- Speaker at Analytical methodology for efficient design of pulsed electromagnetic blank holding system
Hervé Lannou CEA
- Speaker at Auxiliary equipment commissioning of the 11.7 T MRI Iseult magnet
David Larbalestier National High Magnetic Field Laboratory
- Speaker at Present status of Bi-2212 conductor technology
Steven LASSITER Jefferson Lab
- Speaker at Design and commissioning of the SHMS Spectrometer Support Systems at Jefferson Lab
Tat Thang Le Changwon National University
- Speaker at Design and thermal analysis of an HTS module coil for a 12 MW wind power generator
Quentin Le Coz CEA-IRFM
- Speaker at Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
Jae-Hak Lee SungKyunKwan University
- Speaker at Analysis on Design Sensitivity of Permanent Magnet Motor using Lumped Magnetic Circuit Method
Hongseok Lee Korea National University of Transportation
- Speaker at A Study on the V-t Characteristics of PPLP according to Electric Field Uniformity for a Superconducting Transformer
SangGap Lee Korea Basic Science Institute
- Speaker at Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
jeyull Lee Yonsei University
- Speaker at Comparative Study of Magnetic Characteristics between Air-Core and Iron-Core High-temperature Superconducting Quadruple Magnet
- Speaker at Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
Jeong-In Lee CHUNGNAM NATIONAL UNIVERSITY
- Speaker at Analysis of Torque Characteristics according to Gear ratio of Coaxial Magnetic Gear
Shin-Won Lee Jungwon University
- Speaker at Comparative Study on Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiters (SFCLs) with Common Connection Point between Two Secondary Windings
Sang-Taek Lee Korea Electronics Technology Institute
- Speaker at A Study on the Power Converter Performance Comparison & Optimal design induction heating coil for IH jar
SUNG GU LEE Busan University of Foreign Studies
- Speaker at A Study on the Optimal Design of Step Skew Considering End Effect and Interaction Between Layers in Step Skew
- Speaker at A Study on the Selection of the Optimal Number of Poles for Maximizing the Magnetic Flux of Spoke type Permanent Magnet Motor
Chankyeng Lee Changwon National University
- Speaker at Development of a low temperature superconducting magnet with MgB2 wire for a 10 kW DC induction furnace
Tae-Yong Lee Sungkyunkwn Univ
- Speaker at Electromagnetic Performances and Noise Analysis of IPMSM according to the Control Method under Flux-Weakening Region
HyunJung Lee National Fusion Research Institute
- Speaker at Thermo-hydraulic analysis of The KSTAR PF cryogenic loop using SUPERMAGNET CODE
Woo Seung Lee JH Engineering Corp.
- Speaker at Cooling experiment analysis of a prototype thermal siphon system for single crystal ingot growth magnet
- Speaker at Thermal and electric analysis of the flux pump to apply conduction cooled superconducting magnet
Jae-Kwang Lee hanyang university
- Speaker at Design method of Counter rotating Dual Rotor type PMSM
- Speaker at Design method of PMa-SynRM to improve power density
- Speaker at SynRM Rib optimal Design method by Using RSM for High-Power Density
- Speaker at Design of a Non Rare Earth Spoke Type Permananet Magnet Motor for Considering Magnetization after Assembly
- Speaker at Design principle of WFSM for Electric Vehicle based magnetic-thermal equivalent circuit
- Speaker at Thermal limit curve calculation for squirrel cage induction motor based thermal equivalent circuit
KIDOEK LEE Korea Electronics Technology Institute
- Speaker at A Study on a New Structure Ferrite Magnet Motor with Improved Output Density and Mechanical Stability
- Speaker at Analytical approach to maximize the torque density with size constraints for PMSM
- Speaker at Study on the torque ripple reduction design through varying the air-gap magnetic flux density in the SPM motor
Chang young Lee Korea Railroad Research Institute
- Speaker at Evaluation on the operating performances of no-insulation High-Tc Superconducting magnet for Linear Synchronous Motor
Changhyeong Lee Changwon National University
- Speaker at Investigation of Mechanical Analysis for 1500A/400mH Toroid-Type HTS DC Reactor
Jiho Lee Massachusetts Institute of Technology
- Speaker at A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study
Kang Won Lee Joongbu University
- Speaker at Induced Voltage Characteristics by Back-Iron Effect for Electromagnetic Energy Harvester Using Magnetic Fluid
Hojoon Lee Busan Institute of Science & Technology University
- Speaker at Development of shot ball accelerator using coil gun principle for shot abrasive blasting processing
Sang Heon Lee Sunmoon University
- Speaker at Superconducting properties of YBaCuO bulk ceramics using melt process
Ji-Han Lee Sungkyunkwan Univeristy
- Speaker at A study on Double Layer V-Shape Magnet Type IPMSM design in view of demagnetization
Onyou Lee Electrical Engineering, Korea National University of Transportation
- Speaker at Creepage Discharge Characteristics of a Solid Insulation Material for Superconducting Applications
Gang Seok Lee Hanyang Univ.
- Speaker at Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System
- Speaker at Study on the design of a Very-high speed PM Motor/Generator for Electric-Turbo Compounding System
- Speaker at A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system
- Speaker at A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system
Sergey Lelekhov Russian ITER Center
- Speaker at Further development of fusion enabling systems in Russia: suggestions on superconductors and current leads for DEMO-FNS facility.
nian li Southeast university
- Speaker at Estimation of Flux Regulation Capability of a Hybrid PM Axial-Field Flux Switching Memory Machine Considering the Effect of Temperature
Chao Li University of Cambridge
- Speaker at Application of the superconductive fault current limiter in limiting the transformer inrush current
Yi Li
- Speaker at Design of a 30-K/4-kJ Solid Nitrogen Cooled HTS Magnet
Zhuyong Li
- Speaker at Evaluation of Electrical Characteristics for a Twisted Soldered-Stacked-Square (3S) HTS Wire with 1 mm Width
- Speaker at Reduction of the screening current field in HTS coils wound by using Soldering-Stacked-Square (3S) REBCO wires
Liang Li
- Speaker at Development of the 100 T Pulsed Magnet at the Wuhan National High Magnetic Field Center
Yang Li Kyoto University
- Speaker at Influence of E-J characteristics of coated conductors and field ramp-up rates on the shielding-current-induced fields of magnets
Qiu Li
- Speaker at Study on Electromagnetic Force Distribution and Material Forming Performance in Electromagnetic Tube Expansion with Concave Coils
Xiaoxiang Li Huazhong University of Science and Technology
- Speaker at Investigation of bulging behavior of metallic tube in electromagnetic forming process with a bias magnetic field
Rui Li Shenzhen University
- Speaker at A Multi-Phase Doubly-Fed Doubly-Salient HTS Linear Motor for Vertical Transportation
Dawei Li Huazhong University of Science and Technology
- Speaker at Design of a Novel Double-Stator Flux Reversal Machine with Hybrid HTS and PM Excitations
Dawei Li School of Electrical and Electronic Engineering, Huazhong University of Science and Technology
- Speaker at Analysis of EMF Distortion in Magnetic Geared Machines
Jian Li Huazhong University of Science & Technology
- Speaker at Cogging Torque Minimization of Surface Mounted Permanent Magnet Machines with Variable Pole-Arc Magnet in Axial Direction
- Speaker at High Efficiency Permanent Magnet Linear Synchronous Motor
Junjie LI CHMFL
- Speaker at Operation of the helium cryogenic system for the hybrid superconducting outsert at CHMFL
Xianglin Li China University of Petroleum
- Speaker at Design and analysis of a modular HTS linear flux-switching machine for rail transit applications
- Speaker at Performance improvement of a transverse-flux magnetic gear by using skew iron segments
Zhenhua Li China Three Gorges University
- Speaker at The Study of Pulsed Strong Magnetic Field Measurement System based on Distributed Magnetic Field Sensors
Xiang Li Southwest Jiaotong University
- Speaker at The Force Characteristics of The Stack of HTS Tapes Subjucted to Traveling Magnetic Field
Jianwei Li
- Speaker at A quantitative benefits study of the superconducting magnetic energy storage system hybridized with the battery
Zhenhao Li Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology
- Speaker at Application of current filament method to calculation of discharge current and force in electromagnetic sheet metal forming
Lankai Li Institute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at A Permanent Magnet of 60MHz High Resolution NMR for On-line Industrial Application
Chao Li
- Speaker at A 8T Focusing Superconducting Solenoid for FRIB
Quan Li University of Edinburgh
- Speaker at Clarification of Complex Loss in ReBCO Tapes: Dynamic Loss and Magnetisation Loss
Yi Li Intitute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at Electromagnetic Design of HTS insert for NMR Magnet in Consideration of Screening Currents
Yan Li North China Electric Power University
- Speaker at Experimental Study on AC Loss of a Quasi-isotropic Strand Fabricated by 2G HTS CCs in AC Magnetic Fields
Li Li
- Speaker at Magnetic Field Measurement and Analysis of the CSNS/RCS Quadrupole Magnets
Fei Liang Bath University
- Speaker at A finite element model based on T-A formulation for simulating second generation high temperature superconducting coils/stacks with large number of turns
- Speaker at Experimental study of eliminating the screening-current-induced-field in non-insulated HTS coils
Ming Liang Northwest Insititute for Non-ferrous Metal Research
- Speaker at Size effect on the strength of Cu-Ag microcomposites by accumulative drawing and bundling process
Siyuan Liang Huazhong university of science and technology
- Speaker at Electromagnetic analysis and Optimized Design of a noval hybrid type DC Superconducting Fault Current Limiter
chen liang Xi'an Superconducting Magnet Technology Co.,LTD
- Speaker at Winding Technology And Experimental Study On Superconductive Fault Current Limiter
Paul Libeyre ITER Organization
- Speaker at Manufacture of the ITER Central Solenoid components
Sung-Hun Lim Soongsil University
- Speaker at Current Limiting and Recovery Characteristics of A Trigger Type SFCL using Double Quench
- Speaker at Transient Current Limiting Characteristics of Autotransformer Type SFCL using Additional Winding
JONGSUK LIM Hanyang university
- Speaker at A Study on the Position Signal Compensation Control Technique of Hall Sensor Generated by Uneven Magnetic Flux Density
- Speaker at Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System
- Speaker at Study on the design of a Very-high speed PM Motor/Generator for Electric-Turbo Compounding System
Jae-Woo LIM Hanyang Univ in KOREA
- Speaker at Embedded flexible Fe-Si-Al powder composite-film inductor for a Low Power DC-DC Converters
Feng Lin School of electrical and Electronic Engineering Huazhong University of Science and Technology
- Speaker at Research on MgB2 armature windings in fully superconducting AC machine
Xiaodong Lin Sichuan University
- Speaker at Energy-Shaping Control Strategy of SMES
Mengxuan Lin Huazhong University of Science and Technology
- Speaker at A novel non-salient pole rotor to improve self-starting performance of line start PM synchronous motor
Zhijian Ling Jiangsu University
- Speaker at Design and Analysis of a New HTS Electromagnetic Screw
- Speaker at Quantitative Comparison of Embedded and Surface-mounted Magnetic Screws
Guangwei Liu Shenyang University of Technology
- Speaker at Design and performance analysis of a new type high efficiency coupling magnetic core structure for wireless charging of electric vehicle
- Speaker at Study on Design of a Novel Magnetic Field Modulation Linear Primary Permanent Magnet Synchronous Motor
- Speaker at Research on Harmonic Suppression Method of Permanent Magnet Synchronous Motor Based on Surrogate Model
- Speaker at Study on Counter-rotating Dual Rotors Radial Permanent Magnet Motor for underwater vehicle Propulsion
- Speaker at Design and Operation Performance Research of Brushless Doubly-Fed Generator with Cage Bar Assisted Reluctance Rotor
- Speaker at Eddy Current Loss Analysis of Surface Mount High Speed Permanent Magnet Motor Base on Multi-physics Fields
Guole Liu the Institute of Electrical Engineering of the Chinese Academy
- Speaker at Numerical study on AC loss reduction of stacked HTS tapes by optimal design of flux diverter
Qiang Liu Jiangsu Maritime Institute
- Speaker at Cogging Force Reduction of Double-Sided Flux-Switching Permanent Magnet Linear Machine
Guohai Liu School of Electrical and Information Engineering, Jiangsu University
- Speaker at Vibration Comparison of Two Fault-Tolerant Flux-Switching Permanent-Magnet Machines
Shizhuo Liu Institute of Electrical Engineering, CAS
- Speaker at Threshold value analysis of YBCO tapes under transient over-current impulse
Kai Liu Southeast University
- Speaker at Design and Optimize an external rotor Ironless BLDCM used in a Flywheel Energy Storage System
Yingzhen Liu ITEP, KIT
- Speaker at Measurement of Magnetic Materials at Room And Cryogenic Temperature for Their Application to Superconducting Wind Generators
ZHIHONG LIU
- Speaker at The Design and Manufacture of the 90 degree bending Magnets for Proton Beam Therapy
Yichen Liu Jiangsu University
- Speaker at The performance of magnetic suspension and motor/generator of a bearingless BLDCM for flywheel energy storage system
Jing Liu China University of Petroleum (Hua dong)
- Speaker at Force Calculation and Thermal Analysis of the Maglev Machine for the 1000 MW Hydraulic Generator Set
Qi Liu
- Speaker at Temperature and magnetic field dependent Critical Current density of Sr0.6K0.4Fe2As2/Ag Tape
Hongwei Liu North China Electric Power University
- Speaker at Experimental Research of AC Ripple Losses in A High Temperature Superconducting Current Lead of A Magnet
Jie Liu Argonne National Laboratory
- Speaker at FIELD QUALITY FROM TOLERANCE ANALYSES IN EIGHT-PIECE QUADRUPOLE MAGNET*
Jianhua Liu Intitute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at Control design of a magnetic catheter navigation system for cardiac arrhythmias
Kun Liu South West JiaoTong University
- Speaker at Dynamic Responses of Stacked coated conductor tapes Levitated above a Permanent Magnet Guideway
Jianwei Liu Western Superconducting Technologies Co., Ltd.
- Speaker at Advanced superconductors developed at WST
- Speaker at Ongoing efforts at internal-tin Nb3Sn strand with higher Jc and lower Qh for fusion application
Mengyu Liu
- Speaker at Design and performance analysis of a cryostat for pulsed high magnetic field using a small scale helium liquefaction system
Aimin Liu
- Speaker at Research on control system of a novel coil assisted reluctance motor
- Speaker at Research on High Speed Machine with Composite Rotor of Axial PM Assisted Reluctance and Sensorless Control Technology
Tong Liu Jiangsu university
- Speaker at New Modular Magnetic Equivalent Circuit of Dual-Permanent-Magnet-Excited Machine with Modulation Effect Consideration
chengcheng liu Hebei university of technology
- Speaker at Performance Evaluation of a Novel Axial Flux Claw Pole Machine with Soft Magnetic Composite Cores
Brahim LMOUDEN Ibn Zohr University
- Speaker at Pinning Force and critical properties in YBa2Cu3O7-δ
Vito Lombardo Fermi National Accelerator Laboratory
- Speaker at Production of Aluminum Stabilized Superconducting Cable for the Mu2e Transport Solenoid
Jose Vicente Lorenzo Gomez Centro de Investigaciones Energéti cas Medioambientales y Tecno
- Speaker at Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches
Clement Lorin CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR)
- Speaker at Design of a Nb3Sn 16 T block dipole for the Future Circular Collider
- Speaker at Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider
Jiachuan Lou Shenyang University of Technology
- Speaker at Magnetic Field Analysis of a Novel Configuration of Reluctance Machine with Axial Magnetic Flux and Radial Assisted Excitation
Alexandre LOUZGUITI CEA
- Speaker at Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs).
Jun Lu NHMFL
- Speaker at Contact resistance between REBCO tapes coated with a thin resistive layer
Yiliang Lv
- Speaker at Fast cooling high field pulsed magnet with distributed mini cooling gaps
Valeriy Lysenko Lebedev Physical Institute of the Russian Academy of Sciences
- Speaker at Performance test of 1.5 T cryogen free orthopedic MRI magnet
Lizhen Ma Institute of modern physics,CAS
- Speaker at Quench analysis and protection design of SECRAL II superconducting magnet
Tao Ma Beijing Jiaotong University
- Speaker at Design and fabrication of HTS DC bias coil for 500kV saturated iron core fault current limiter
Guangtong Ma Southwest Jiaotong University
- Speaker at Experimental Evaluation and Numerical Simulation of a HTS Linear Synchronous Motor for High Speed Railway
Jun Ma Cambridge Universitry
- Speaker at Direct current decay in a closed YBCO No-insulation coil under external AC magnetic field
Jun Ma
- Speaker at The Charging and Discharging characteristics of a YBCO Metal-insulation coil
Yuanyuan Ma University of Science and Technology of China
- Speaker at The design of quench protection system for CFETR CS model coil
Arnaud Madur CEA Saclay
- Speaker at A Wide Aperture Superconducting Vector Magnet for photon beamlines: WAVE Photons
- Speaker at Preliminary design of the FAIR Super FRS superferric branched dipoles
Milan Majoros The Ohio State University
- Speaker at FEM Modelling Studies of 3 T Cryogen Free MRI Magnet based on MgB2 conductor
- Speaker at Stability and Normal Zone Propagation in a conduction cooled racetrack coil wound of YBCO Coated Conductor Tape – FEM Modeling
- Speaker at YBCO pancake coil wound using an electrically non insulated tape: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T
Zhehua Mao Institute of Plasma Physics, Chinese Academy of Sciences(ASIPP)
- Speaker at Axial tensile stress-strain characterization of Bi2212 round wire with different heat treatment
Maxim Marchevsky Lawrence Berkeley National Lab. (US)
- Speaker at Real-time functional diagnostics of superconducting magnets using acoustic techniques
Vittorio Marinozzi University of Milan / INFN
- Speaker at Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider
Samuele Mariotto University of Milan - INFN Milan
- Speaker at Study of a Sextupole Round Coil Superferric Magnet
William Marshall National High Magnetic Field Laboratory
- Speaker at Fabrication and Testing of Bi-2223 Insert Coils for High Field NMR Magnets
Fabrice Marteau Synchrotron SOLEIL
- Speaker at Design and characterisation of tunable high gradient permanent magnets quadrupoles
- Speaker at Simulations, measurements and sorting of THOMX ring bending magnets.
Nicolai Martovetsky ORNL
- Speaker at Mechanical Behavior of the ITER TF Insert
- Speaker at Performance of the ITER CS joints
Egor Marushin
- Speaker at The PF1 coil electrical joint test results
Akiyoshi MATSUMOTO NIMS
- Speaker at Superconducting joints made using internal Mg diffusion (IMD)-processed MgB2 wires
Ryuta Matsuo Sophia University
- Speaker at Quench protection of HTS coil composed of multiple pancake-coils by changing current distribution in pancake-coils
Peter McIntyre Texas A&M University
- Speaker at Cable-in-Conduit Dipoles for the Ion Ring of JLEIC
- Speaker at High-field dipoles using superconducting cable-in-conduit
- Speaker at NMR Solenoid for Multi-Sample Spectroscopy
- Speaker at Stealth superconducting magnet technology for collider IR and injector requirements
- Speaker at Walk-Through MRI: Affordable Technology for Well-Patient Cancer Screening
Enming Mei
- Speaker at Study of a Cryogen Free MgB2 Superferric Dipole for Particle Accelerator Application
Ziad melhem Oxford Instruments
- Speaker at CRYOGENIC ENVIRONMENTS FOR QUANTUM TECHNOLOGIES
Rossi Mendez Demaco Holland B.V.
- Speaker at Cryogenics Engineering for Superconducting Magnets at DEMACO
Liao Meng State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology
- Speaker at Multi-objective filter designing for HTS SMES considering the voltage distribution characteristic
- Speaker at Optimization for transient model of HTS SMES magnet
Matthias Mentink CERN
- Speaker at Magnet quench protection of the FCC-hh 16 T block-type dipole magnet by means of quench absorption coils
- Speaker at Quench Behaviour of the HL-LHC Twin Aperture Orbit Correctors
Xu Miaofu Institute of High Energy Physics(IHEP)
- Speaker at Design and Research of Cryostat for 3W1 SC Wiggler Magnet
Philip Michael Massachusetts Institute of Technology
- Speaker at A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K
Anna Mierau GSI
- Speaker at Testing of the superconducting magnets for the SIS100
Attilio Milanese CERN
- Speaker at Twin aperture bending magnets and quadrupoles for FCC-ee
Iuliia Mitrofanova JINR
- Speaker at CRYOGENIC TECHNOLOGIES OF THE NICA ACCELERATOR COMPLEX
Hideaki MIURA Tohoku University
- Speaker at Estimation method of optimal amount of overshooting current for temporally uniform magnetic field in a conduction-cooled ReBCO coil for MRI applications
Osuke Miura Tokyo Met. University
- Speaker at Levitation separation of precious metals utilizing magneto-Archimedes effect in high gradient magnetic fields
Ryosuke Miyao Hokkaido University
- Speaker at Simulation of Screening Current Reduction Effect of External AC Magnetic Field on Multi-turn REBCO Pancake Coils
- Speaker at Thermal and Electromagnetic Simulation of Multi-stacked No-Insulation REBCO Pancake Coils on Normal-state Transition by PEEC model
- Speaker at Unbalanced Torque in High Magnetic Field No-Insulation REBCO Pancake Magnet after Quench
Akihisa Miyazoe Hitachi Ltd.
- Speaker at A Study on Temporal Stabilization of Magnetic Flux Focused by a Superconducting Magnetic Lens
Shinya Mizuno Sophia Univ.
- Speaker at Feasibility Study of MgB2 Cable for Pancake Coil of Energy Storage Device
Ivan Morozov BINP
- Speaker at Fast dipole magnet development
Anders Mortensen Siemens Magnet Technology
- Speaker at Hub- and Site-cooling of MRI magnets using a mobile cryogenic system
Takanori Motoki Aoyama-Gakuin Univ.
- Speaker at Enhancement of crystallinity and critical current properties of fluorine-free MOD processed YBCO films by introduction of oxyhalide Ba2Cu3O4X2 (X = Cl, Br)
Carsten Mühle GSI Darmstadt
- Speaker at Optimization of the Radiation Resistant Quadrupole Magnets for the SIS-100 Accelerator of the FAIR Project
Tim Mulder University of Twente (NL)
- Speaker at Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets
- Speaker at Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires
Javier Munilla CIEMAT
- Speaker at Cold Tests and Magnetic Characterization of a Superconducting Magnet for a Compact Cyclotron for Radioisotope Production
Jorge MUNOZ CEA
- Speaker at Improvement of the Magnetic Design for the Superferric Dipoles for the Super-FRS of FAIR
Haruyuki Murakami National Institutes for Quantum and Radiological Science and Technology
- Speaker at Vacuum Pressure Impregnation for Central Solenoid of JT-60SA
Akira Murakami Ichinoseki College
- Speaker at Mechanical properties of bulk MgB2 superconductors processed by spark plasma sintering at various temperatures
Joseph F Muratore Brookhaven National Laboratory
- Speaker at Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4m Long MQXF Coil.
Masamichi Murayama Tokyo Institute of Technology
- Speaker at Cascaded Multilevel Converter with Floating Capacitors for a small tokamak, PHiX
Jaakko Samuel Murtomaki Tampere University of Technology (FI)
- Speaker at 10 kA joints for Multi-Tape HTS Cables
Marco Musardo Brookhaven National Laboratory
- Speaker at Magnetic Field Optimization of an Apple-II Quasi-Periodic Undulator for the NSLS-II Project
Riccardo Musenich Universita e INFN Genova (IT)
- Speaker at Canted Cosine Theta Solenoid Design Alternative for the Magnet System of IAXO, the International Axion Observatory Helioscope
- Speaker at The limits of space radiation magnetic shielding
Luigi Muzzi ENEA
- Speaker at E-WASP, a facility to test strain, temperature, magnetic field and current effects on superconducting samples
Takayoshi Nakashima Sumitomo Electric Industries, Ltd.
- Speaker at Recent Progress of Application-Oriented DI-BSCCO Wires
Seokho Nam Yonsei University
- Speaker at Effects on the Parasitic Capacitance of HTS Coils Considering Impulse Voltage for Dielectric Design
- Speaker at Research on the Cooling Enhancement of HTS Coil using Metal Insulation Tape
Gi-Dong Nam Changwon National University
- Speaker at Design and comparative analysis of MgB2 and YBCO wire-based superconducting wind power generators
Aamir Nazir Jiangsu University
- Speaker at Torque Ripple Minimization in a PM-assisted Synchronous Reluctance Motor with Different Flux Barrier Rotor
Martina Neri ASG Superconductor s.p.a.
- Speaker at OPTIMIZATION, DESIGN AND OPERATION ASSESSMENT OF A MULTIPURPOSE DETECTOR FOR NICA COLLIDER
Doan Nguyen LANL
- Speaker at Electrical and Mechanical Interactions between Component Coils of Multi-Plex Pulsed Magnet Systems
- Speaker at Recent Magnet and Material Development at the Pulsed Field Facility – NHMFL
Dongsheng Ni Institute of Modern Physics Chinese Academy of Sciences
- Speaker at Cryogenic test facility for the HIAF Superconducting Dipole Magnet Prototype
- Speaker at Design and Test of Joints for HIAF Superconducting Dipole Magnet Prototype
Sylvie NICOLLET CEA
- Speaker at THEA/SIMCRYOGENICS THERMAL-HYDRAULIC MODEL OF JT-60SA TOROIDAL FIELD COIL QUENCH IN COLD TEST FACILITY
- Speaker at Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility
Martin Nikolo St. Louis University
- Speaker at Upper critical and irreversibility magnetic fields and transport properties of bulk K-, Ni-, and Co-doped BaFe2As2 pnictides for different granularities and their prospects in magnet design
Emelie Kristina Nilsson CERN
- Speaker at Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
Gen Nishijima National Institute for Materials Science
- Speaker at Development of liquid nitrogen cooled RE-Ba-Cu-O magnet for NMR use
Rongmei niu National High Magnetic Field Lab.
- Speaker at Zylon aging and light resistance
So Noguchi Hokkaido University
- Speaker at A Facile Method to Estimate Screening Current-Induced Fields in REBCO Pancake Coils
- Speaker at Electrical Field Generation by Hall Effect in High Field No-Insulation REBCO Pancake Coils
Shinichi Nomura Meiji University
- Speaker at Design Study on High Frequency Magnets for Magnetic Hyperthermia Applications
Gabriella Norcia ASG Superconductors S.p.A.
- Speaker at ENLARGED BORE 11.74T MAGNET FOR BRAIN RESEARCH APPLICATION
Kazuki Norimoto Sophia University
- Speaker at Transport properties of commercially available REBCO conductors at 4.2 K
Patrick Noyes NHMFL
- Speaker at 32T Protection Design and Operation
François Nunio CEA-IRFU
- Speaker at High definition 3D finite element analysis of low temperature Rutherford cable
Jun Ogawa Niigata University
- Speaker at AC loss distribution in two-layer HTS twisted cable
- Speaker at Modeling of magnetization loss in HTS tape exposed to all magnetic field direction
Sangjun Oh NFRI
- Speaker at A momentum-preserved node concept for thermohydraulic analysis of fusion magnet
Shunsuke Ohashi Kansai University
- Speaker at Improvement of the propulsion coils pitch and excitation method based on the magnetic gradient by the pinned flux in the permanent magnet-HTS hybrid magnetically levitated conveyance system
- Speaker at Weight reduction of the damper coils in the superconducting magnetically levitated bogie
Norihito Ohuchi KEK
- Speaker at Design and construction of the magnet-cryostat for the SuperKEKB Interaction Region
Soichiro Oki Kyushu University
- Speaker at Additional AC loss properties of REBCO superconducting two-strand parallel conductors
Ivan Okunev BINP SB RAS
- Speaker at A set of equipment for measuring and investigating the magnetic field at the reference magnet of the NICA booster
Charles Orozco FNAL
- Speaker at Hall probe Calibration System Design for the Mu2e Solenoid Field Mapping System
Maxim Osipov NRNU MEPhI
- Speaker at Levitation and guidance forces of CC-tape stacks
Alexander Otto Solid Material Solutions, LLC
- Speaker at Compact, high field coils made with strong, rectangular Bi2212 superconductor wire
- Speaker at Strong, round and rectangular HTS wires based on the Bi2212 superconductor
- Speaker at Superconducting HTS joints for connecting strong Bi2212 wires
Masayoshi Oya Mitsubishi Electric Corporation
- Speaker at Development of 3 T high-temperature superconducting magnet for MRI
Hidemasa Ozeki National Institutes for Quantum and Radiological Science and Te
- Speaker at Tcs Measurement Result of ITER Toroidal Field Insert Coil Tested in 2016
Thomas Painter Magnet Science & Technology-NHMFL
- Speaker at Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet
Helder Filipe Pais Da Silva CERN
- Speaker at FCC-hh Detector Magnet Cryostats and Cold Mass Suspension system
Yunhao Pan Shanghai Jiao Tong University
- Speaker at Reliability Study on Using a Single Equivalent Connection Layer in Finite Element Models for Coated Conductors’ Joint
Heng Pan LBNL
- Speaker at Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet
- Speaker at Mechanical Performance of a Superconducting 28 GHz Ion Source Magnet for FRIB
- Speaker at Thermo-Magnetic Mechanical stability study of the MICE Spectrometer Solenoids
Wei Pan Jiangsu University
- Speaker at Direct-Control Strategy for Bearingless Permanent Magnet Synchronous Motor
- Speaker at Starting Control Strategy of Bearingless Permanent Magnet Synchronous Motor
Andres Pantoja Victoria University of Wellington
- Speaker at Frequency ramping effects on a dynamo-type HTS flux pump
- Speaker at Impact of stator ring width on output of a dynamo-type HTS flux pump
Dimitrios Papathanasiou Ampulz
- Speaker at Ramping Injector Power Supply for Dipole Magnets
Enric Pardo Slovak Academy of Sciences
- Speaker at Coupled AC loss and thermal modeling in REBCO windings containing more than 10000 turns
Michael Parizh GE Global Research
- Speaker at Conductor for MRI magnets beyond NbTi
NOA PARK Chosun University
- Speaker at Analysis of the coupling factor according to diameter of superconducting transmitting and receiving coils
Dongkeun Park MIT
- Speaker at A Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/70-mm MgB2 Osteoporosis MRI: Two Magnet Design Options
- Speaker at Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet
- Speaker at HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype
Gyeong-Jae Park Sungkyunkwan Univeristy
- Speaker at Optimal desing of PMa-synRM for electric propulsion system considering wide operation range and demagnetization
Young-Un Park Sunchon National University, Korea
- Speaker at Analytical Methods for Reducing Cogging Torque in Single-Phase BLDC Motors with a Tapered Air-Gap and Asymmetric Notches
Heecheol Park Changwon National University
- Speaker at Thermal characteristics of a prototype HTS quadrupole magnet for In-flight fragment separator of RISP
Eui-Jong Park Chosun University
- Speaker at A Design of Outer Yoke and Enclosure Considering Magnet Eddy Current Loss of Magnetic Gear
- Speaker at The Number of Magnet Poles Decision Method of Magnetic Gear for Torque Ripple Reduction
Raphael Pasquet Sigmaphi
- Speaker at Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
Jay Patel
- Speaker at Design and Initial Results of a Novel in-situ A.C. loss Measurement in Axial Flux Synchronous Machine
Xiaoze Pei University of Bath
- Speaker at Experimental tests on a superconducting hybrid DC circuit breaker
Ton Peijnenburg VDL Enabling Technologies Group
- Speaker at In-vacuum magnet technology inspired from semiconductor equipment
Bertrand PELUSO CEA
- Speaker at MIFI (Magnet Infrastructure Facilities for Iter) : activities overview
Xuan Peng Hyper Tech Research Inc.
- Speaker at Advanced tube type Nb3Sn conductor and its applications in Hyper Tech
Tao Peng Wuhan National High Magnetic Field Center
- Speaker at Development and Performance of 65 T Fast-cooling User Magnet with Long Service Life
chhon pes CEA
- Speaker at Simulation of Thomson Parabola spectrometer for charged particle diagnostics in the PETAL+ project
Wei Pi North China Electric Power University
- Speaker at A Numerical Method for Simulating the Quench Behavior of Superconductors
- Speaker at Current Sharing Temperature and Quench Characteristics of ReBCO Quasi-isotropic Superconducting Strands in Different Sheaths
Rüdiger Picker TRIUMF
- Speaker at PENeLOPE: testing a one-of-a-kind neutron storage magnet
Zbigniew Piec General Atomics
- Speaker at Superconducting Feeder System For ITER Central Solenoid Module Final Test Facility
Federica Pierro Tufts University
- Speaker at Finite element analysis of strain distribution of REBCO coated conductors subjected to bending conditions experienced in high-field magnet applications
Sergei Pokrovskii National Research Nuclear University MEPhI
- Speaker at Influence of picosecond and femtosecond laser impact on magnetic and transport characteristics of the HTS tape
Gian Mario Polli ENEA
- Speaker at Completion of ENEA’s procurement for 9 TF coils of JT-60SA tokamak
Amaury PORHIEL Sigmaphi
- Speaker at Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles
Cornelius Post Lambda Engineering
- Speaker at EMC tests at the location of the DCCT and ADC calibration laboratory at FAIR project
subrata pradhan Institute for Plasma Research
- Speaker at Progresses in Mg11B2 intermediate superconductors initiatives in India
Burkhard Prause President & CEO Bruker EST, Inc.
- Speaker at Meeting Divergent Expectations: Superconductors between Industrial Applications & Cutting-Edge Science
Soren Prestemon Lawrence Berkeley National Laboratory
- Speaker at The US Magnet Development Program for High Field Accelerator Magnet R&D
Pierre Pugnat CNRS-LNCMI, Grenoble, France
- Speaker at [Invited] Progress in the Construction of the 43 T Hybrid Magnet at LNCMI-Grenoble
Dariusz Pulikowski Szczecin University (PL)
- Speaker at Windability tests of Nb3Sn Rutherford cables for HL-LHC and FCC
maofei qian Shanghai Institute of Applied Physics, Chinese Academy of Scien
- Speaker at Design and measurent of a 2.4 tesla superbend magnet prototype at SSRF
Xin Qiao Zhejiang University
- Speaker at Speed up the cooling process of superconducting magnets by applying a large cooling capacity Stirling cryocooler
Yuemei Qin Jiangsu university
- Speaker at Analysis and Control of a Multi-Phase Bearingless Permanent Magnet Synchronous Motor
- Speaker at Design of Suspension Force Feedback Control System of Multiphase BPMSM Based on MRAS Inductance Parameter Identification
- Speaker at Direct Control of Bearingless Permanent Magnet Slice Motor Based on Flux Linkage Observer Using Phase-locked Loop
- Speaker at Electromagnetic Performance Optimization Design of 5-phase BPMSM Based on Third Harmonic Injection
- Speaker at Soft Sensing Modeling of Rotor Displacements Based on Continuous Hidden Markov Model
Jinggang Qin
- Speaker at Manufacturing of CFETR CSMC Full-size Conductors
- Speaker at Mechanical properties of ITER CICC jacket in China
- Speaker at Recent progress in development of high performance CICCs for CFETR magnet
Xing Qin Western Superconducting Technologies CO.,Ltd
- Speaker at The influence of heating treatment on NbTi superconducting wires with Cu5Ni alloy matrix
BIn Qin HUST
- Speaker at Design considerations of gantry beamline with fast energy modulation for HUST Proton Therapy Facility
Li Qiu
- Speaker at Study on Electromagnetic Force Distribution and Copper Fatigue Performance in Electromagnetic Strengthening with Axial Compression
Derong Qiu Shanghai Jiao Tong University
- Speaker at Field Stabilization Method of the Persistent Current Mode Coil Made of 2G HTS tape at 77 K
- Speaker at Test of a Prototype Inductive Superconducting Fault Current Limiter Using No-insulation Coil
Qingquan Qiu Institute of Electrical Engineering, Chinese Academy of Science
- Speaker at Design and Test of 10 kV/400 A Flux-coupling Type Superconducting Fault Current Limiting Module
- Speaker at Influence of Operating Parameters on Discharge Characteristics of Superconducting High Field Magnetron
Li Qiu
- Speaker at Study on Electromagnetic Force Distribution and Material Forming Performance in Electromagnetic Tube Expansion with Concave Coils
Huu Luong Quach Jeju National University
- Speaker at Characteristic Analysis on Transient Electric Power of a 1.5-MW-Class HTS motor for Electric Ship Propulsion
Lionel Quettier CEA Saclay
- Speaker at Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System
Emmanuele Ravaioli LBNL
- Speaker at Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet
- Speaker at Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Speaker at Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
Luigi Reccia Fusion for Energy
- Speaker at Optimization of the ITER Pre-Compression Ring Test Rig Flange
Li Ren Huazhong University of Science and Technology
- Speaker at Design and verification test of a flux-coupling type superconducting fault current limiter
Li Ren
- Speaker at A Digital Electrometric Method for Measuring the AC loss of a HTS Coil
Selanna Roccella ENEA
- Speaker at Assessment of electrical insulation of a superconducting magnet winding pack under severe loading conditions
Etienne Rochepault CERN
- Speaker at 3D Magnetic and Mechanical Design of Coil Ends for the Racetrack Model Magnet RMM
- Speaker at Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Speaker at Parametric Study of Block-coil Dipoles Using Graded Conductors
Felix Rodriguez Mateos CERN
- Speaker at Design and Manufacturing of the First Industrial-Grade CLIQ Units for the Protection of Superconducting Magnets for the High-Luminosity LHC Project at CERN
Lucio Rossi CERN
- Speaker at [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
Peter Rottländer GSI Darmstadt
- Speaker at Magnetic Septa for the SIS100 Accelerator at FAIR
Igor Rudnev National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
- Speaker at Temperature Evolution of Pinning Force in GdBaCuO Coated Conductors with Artificial Pinning Centers
Janne Ruuskanen Tampere University of Technology
- Speaker at Design and Analysis of an Energy-Extraction System for High Current HTS Magnets
Shintaro Sagawa Kyushu University
- Speaker at Current sharing properties of REBCO superconducting parallel conductors wound into a coil
Hisaki Sakamoto Furukawa Electric Co., Ltd.
- Speaker at Development of Superconductors at Furukawa Electric Group
Tiina-Mari Salmi Tampere University of Technology, Finland
- Speaker at Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements.
Park Sang Ho Korea polytechnic university
- Speaker at AC loss analysis of the armature windings of a fully HTS rotating machine with dual field windings
PARK SANGYONG KOREA
- Speaker at Operating characteristics of Arc-induction type DC circuit breaker
Xabier Sarasola EPFL - SPC
- Speaker at Measurements of the Effective Thermal Conductivity of the ITER TF Coil Case Cooling System
Frederic Savary CERN
- Speaker at Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN
Laura Savoldi Politecnico di Torino
- Speaker at Analysis of a protected Loss Of Flow Accident (LOFA) in the ITER TF coil cooling circuit
Christian Scheuerlein CERN
- Speaker at Thermomechanical behavior of the HL-LHC 11 tesla Nb3Sn magnet coil constituents during reaction heat treatment
Francesco Schillaci Institute of Physics Czech Academy of Science, ELI-Beamlines
- Speaker at Design of a laser-driven kiloTesla magnetic bottle
- Speaker at Errors and optics study of a permanent magnet quadrupole system
- Speaker at Status and realization of an high efficiency transport beamline for laser-driven ion beams
Hans Schneider-Muntau CS&T
- Speaker at Ultimate Forces of the Grenoble Hybrid Magnet
Daniel Schoerling CERN
- Speaker at Considerations on the cost for the baseline EuroCirCol high-field dipole arc magnet components and assembly
Federico Scurti NCSU
- Speaker at Effects of metallic coatings on the thermal sensitivity of optical fiber sensors at cryogenic sensors
- Speaker at Quench detection via Rayleigh backscattering interrogated optical fibers
- Speaker at Self-monitoring, SMART REBCO coated conductors
Kamil Sedlak Paul Scherrer Institut, Switzerland
- Speaker at Study of the Hotspot Temperature during Quench in the Non-Planar Coils of W7-X
Venkat Selvamanickam University of Houston
- Speaker at Progress in REBCO coated conductors for high magnetic field applications
SangHyeok Seo SungKyunKwan University
- Speaker at Design strategy of interior permanent magnet synchronous motor for maintaining torque performance at flux weakening region
Sung-Won Seo Chungnam National University
- Speaker at Characteristic Analysis and Experimental Verification for a Double-sided Permanent Magnet Linear Synchronous Generator According to Magnetization Array
- Speaker at Characteristic Analysis for the Influence of Auxiliary Teeth and Notching on the Reduction of the Detent Force of a Permanent Magnet Linear Synchronous Generator
- Speaker at Comparative Analysis of the Characteristics of Linear Induction Motor and Permanent Magnet Linear Synchronous Motor Using the Container Scanner Vehicle with Same Mover
- Speaker at Torque Analysis and Experimental Verification of Synchronous Permanent Magnet Coupling with Halbach Arrays
Myung-Ki Seo Sungkyunkwan University
- Speaker at Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor
Jihoon Seok Changwon National University
- Speaker at Measurement of overall thermal resistance and contact thermal resistance in conduction cooled HTS magnets
Lee Seyeon Korea polytechnic university
- Speaker at A long solenoid HTS magnet with the Joint-less winding technique
Stefano Sgobba CERN
- Speaker at Investigation of Materials and Welds for the Precompression Structure of the ITER Central Solenoid
Boyang Shen University of Cambridge
- Speaker at AC Loss Investigation on the High Temperature Superconducting (HTS) Coil Under the Action of AC Currents and AC Magnetic Fields
yang shen Naval University of Engineering
- Speaker at Investigation on Optimal Third-order Harmonic Shaping Method for Parallel Magnetized Surface-Mounted PM Machine
Jie Sheng University of Bath
- Speaker at A 3D T-A model for the stacks of second generation high temperature superconductor
- Speaker at Fast Calculation of Quenching Performance of Superconducting Materials Based on a Multi-dimensions Look-up Table
Jiang Shengqian
- Speaker at Performance simulation of a bias-flux superconducting fault current limiter (SFCL) based on MATLAB/SIMULINK
Jiangtao Shi Huazhong University of Science and Technology
- Speaker at The implement of control and date acquisition system for the 100 T pulsed high magnetic field facility at WHMFC
Chaojie Shi Huazhong University of Science and Technology
- Speaker at A Novel Flux-Reversal Linear Permanent Magnet Machine with Consequent-pole Permanent Magnets and HTS Bulks
- Speaker at A Novel Linear Permanent Magnet Vernier Machine with HTS Coils and Halbach Permanent Magnet Array
Seong Yeub Shim GSI
- Speaker at Numeric Analysis of the Rib geometry effect on multipole magnetic fields
Jun-ichi Shimoyama Aoyama Gakuin University
- Speaker at Critical Current Properties of Precisely Cation Composition Controlled RE123 Melt-Solidified Bulks
Kang Hwang Shin SuNAM Co., Ltd.
- Speaker at Construction and Test of a 400 MHz 100 mm Conduction-Cooled NMR Magnet wound with Metal-Clad GdBCO Tapes
Kyung-Hun Shin Chungnam National University
- Speaker at Analysis and Experimental Study of Permanent Magnet Machine for Detecting Rotor Eccentricity
- Speaker at Analytical Calculation and Experimental Verification for Electromagnetic Vibration Sources and Optimal Design in Permanent Magnet Synchronous Machines
- Speaker at Analytical Calculation for Rotor Eddy-Current Losses in Permanent Magnet machine
- Speaker at Analytical Investigation of the On-load Electromagnetic Performance of Magnetic-Geared Permanent-Magnet Machines
- Speaker at Analytical Modeling and Experimental Verification for Electromagnetic Analysis of Permanent Magnet Linear Synchronous Machines with Horizontally Magnetized Permanent Magnets accounting for Flux-Passing Iron Pole
- Speaker at Core Loss Calculation of Permanent Magnet Machines Using Analytical Method
- Speaker at Design and Analysis of Magnetic Geared Permanent Magnet Machine Considering Loss Reduction
- Speaker at Influence of Rotor Structure on End Effects of High-Speed Permanent Magnet Synchronous Generators Using 3D Finite Element Analysis
Hyung-Seop Shin Andong National University
- Speaker at Strain characteristics of Ic in brass laminated GdBCO CC tapes under various temperature and magnetic field conditions
Eiji Shizuya Sumitomo Electric Industries, Ltd.
- Speaker at Quench (Thermal Runaway) Protection of Bi2223 (DI-BSCCO) Magnets
xu shoufeng Huazhong University of Science and Technology
- Speaker at Analysis of deep drawing of stainlesss steel sheet using electromagnetic forming with a driver sheet
GUO SIYU Kyoto University
- Speaker at Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor
Yusuke Sogabe Kyoto University
- Speaker at Comparison between AC loss measurements and analyses in coil assemblies with different geometries and conductors
- Speaker at Design of a cosine-theta dipole magnet considering influence of shielding-current-induced field on field quality
Myung-Hwan Sohn Korea Electrotechnology Research Institute
- Speaker at Controllability of the contact resistance of 2G HTS coil with metal insulation
Helmut Soltner Forschungszentrum Jülich GmbH
- Speaker at A field mapper for the determination of the multipole components of the curved HESR dipole magnets
Hyun Hee Son Department of Materials Science and Engineering, Korea University
- Speaker at A Study on Thermal and Electrical Stabilities of GdBCO Coils Impregnated with Epoxy Composites Using Surface-Treated Carbon Nanotube Fillers
honghai song Brookhaven National Laboratory
- Speaker at Ramping Turn-to-turn Loss and Magnetization Loss of HTS No-Insulation Coils due to Non-uniform Current Distributions (Overview)
Myung-Geun Song Hanwha Defense System
- Speaker at The radial electromagnetic force analysis for design of multi-stages synchronous induction coilgun
Wenjuan Song Beijing Jiaotong University
- Speaker at Measurement of current-voltage curve of high-temperature superconductor tape at controllable current-sweeping rate
Jung-Bin Song Department of Materials Science and Engineering, Korea University
- Speaker at Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires
Jun-Young Song School of Electronic and Electrical Engineering, Sungkyunkwan University
- Speaker at Numerical Analysis of Variable Flux Memory Motor Considering Characteristics of Permanent Magent Load-Line
Seunghyun Song Electrical and Electronic Engineering, Yonsei University
- Speaker at Analytic Study of the Active Quench Detection Method for the HTS Magnet using Resonance circuit
- Speaker at Twist Pitch Length Calculation for the HTS Cable Application Using Genetic Algorithm
massimo sorbi Milan University & INFN-LASA
- Speaker at Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan
Jonathan David Speed CERN
- Speaker at Quadrupole design for the 2 GeV upgrade of the CERN PS-Booster
Francesco Stacchi Udine University
- Speaker at A new model for the simulation of a cable-in-conduit cabling procedure
Andrzej Stafiniak
- Speaker at Locating Electrical Faults in Superconducting Accelerator Magnets
Marco Statera INFN Milano - LASA
- Speaker at A fast 10 kA current switch for High Temperature Superconductor accelerator magnets
- Speaker at Construction and cold test of the superferric octupole and decapole for the LHC Luminosity upgrade
Antti Aleksis Stenvall
- Speaker at Open Material Property Library With Native Simulation Tool Integrations (OpMaST)
Boris Stepanov EPFL - SPC
- Speaker at Inter-layer Joint for the TF Coils of DEMO - Design and R&D
Dmitriy Stepanov NIIEFA Saint-Petersburg
- Speaker at The PF1 coil tail sample test
Boris Stepanov
- Speaker at Performance of the ITER CS joints
Stoyan Stoynev FNAL (US)
- Speaker at Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
Thomas Strauss Fermilab
- Speaker at Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
- Speaker at The Mu2e Solenoid Cold Mass Position Monitor System
Yu Suetomi RIKEN
- Speaker at Remarkable difference in thermal runaway behavior between a Ni-alloy reinforced Bi-2223 coil and a REBCO coil
Michinaka Sugano
- Speaker at Magnetic Design Update of Large Aperture Beam Separation Dipole for the HL-LHC Upgrade
- Speaker at Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
Masahiro Sugimoto Furukawa Electric Co., Ltd.
- Speaker at Nb-rod-method Cu-Nb/Nb3Sn wires for practical React-and-Wind applications
Mike Sumption The Ohio State University
- Speaker at Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications
- Speaker at Influence of field cycle and applied current on coated conductor magentization and decay for accelerator applications
- Speaker at Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields
Quqin Sun
- Speaker at Fatigue failure analysis of a 60T pusled magnet at the WHMFC
Eric SUN Jefferson Lab
- Speaker at Comparison of Measured and Simulated Quench Behaviors of Superconducting Magnets for Jefferson Lab’s 11 GeV Super High Momentum Spectrometer
linyu sun Southwestern Institute of Physics
- Speaker at The conceptual design and analysis of the background magnet for a conductor test facility
Liangting Sun Institute of Modern Physics, Chinese Academy of Sciences
- Speaker at Superconducting Magnets for High Performance ECR Ion Sources
Qixing Sun
- Speaker at Partial isolation quench protection method for YBCO SMES magnet
Jiuce Sun KIT
- Speaker at Design and Test of the Cryogenic Cooling System for the Rotating Magnetic Validator of the 10 MW SUPRAPOWER Offshore Superconducting Wind Turbine
yan sun
- Speaker at Study on Design Feasibility of No-insulation HTS Magnet Operated in Persistent-Current Mode for Linear Synchronous Motor
Hae-Jin Sung Changwon Nationnal University
- Speaker at Hardware integration and performance analysis of a 10 kW HTS wind power generator with brushless exciter
Tomone Suwa National Institutes for Quantum and Radiological Science and Technology
- Speaker at ・ Evaluation of thermal strain induced on components of Nb3Sn strand during cool down
Takumi Suzuki Kyushu University
- Speaker at Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method
Kento Suzuki High Energy Accelerator Research Organization
- Speaker at Characteristics of an HTS dipole magnet
- Speaker at Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
Wurui Ta Lanzhou University
- Speaker at Analytical investigation in bending characteristic of pre-twisted HTS tapes
Kohki Takahashi Tohoku University
- Speaker at Performance of a HTS Persistent Current System for REBCO pancake coil
Keita Takahashi Iwate University
- Speaker at Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization
Tomoaki Takao Sophia University
- Speaker at Influence of high thermal conduction plastic having negative thermal expansion property on cooling performance in conduction cooled HTS coils
Teruou Takayama Yamagata University
- Speaker at Shielding Current Analysis in High-Temperature Superconducting Film and Its Application
Tomohiro Takayanagi JAEA/J-PARC
- Speaker at New design of a pulse magnet for the J-PARC RCS injection shift bump magnet
Yasuaki Takeda The University of Tokyo
- Speaker at Fabrication of grain aligned Bi2223 thick films with high critical current properties
Hitoshi Tamura National Institute for Fusion Science
- Speaker at Nonlinear multiscale structural analysis of a superconducting coil and support structure for the helical fusion reactor
Yunfei Tan
- Speaker at The commissioning of the outert superconducting magnet for a hybrid magnet at CHMFL
JunJie Tang Southwest Jiaotong University
- Speaker at Influence of Soft Ferromagnetic Section on Trapped Field of High Temperature Superconducting Bulk Magnet used for linear motor application
NORIO TANI Japan Atomic Enerygy Agency
- Speaker at Design Study of Main Magnets for the J-PARC RCS Energy Upgrade
Thomas Taylor
- Speaker at Installation of quench heaters within in a Nb3Sn winding
Herman Ten Kate CERN
- Speaker at Superconducting Detector Magnets for CERN’s Future Circular Collider
Leonid Tkachenko Institute for High Energy Physics
- Speaker at New Geometry of Wide-Aperture Quadrupole Magnets for Plasma Experiments in the FAIR Project
Jean-Philippe Tock CERN
- Speaker at A Statistical Analysis of Electrical Faults in the LHC Magnets
Ezio Todesco CERN
- Speaker at Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
Valerio Tomarchio Fusion For Energy (F4E)
- Speaker at ON A FULL 3D THERMAL STRUCTURAL AND HYDRAULIC FINITE ELEMENT MODEL OF THE JT-60SA TOROIDAL FIELD COILS
Giordano Tomassetti ENEA
- Speaker at Structural optimization methodology of the 2-D inner-leg cross-section for the Toroidal Field Coils of fusion reactors
Naoki Tominaga Kyoto University
- Speaker at Application of hierarchical matrices to large-scale electromagnetic field analyses of coils wound with coated conductors
Masaru Tomita Railway Technical Research Institute
- Speaker at Superconducting properties of Prototype Pancake Coil using MgB2 Cable
Takahiro Tomitsuka meiji university
- Speaker at Delamination Diagnostic Method of REBCO Tapes Using Ultrasonic Waves
Łukasz Tomków Wrocław University of Technology
- Speaker at Electromagnetic analysis of a superconducting bus-bar for SIS100 particle accelerator at FAIR
Davide Tommasini CERN
- Speaker at Status of the 16 T dipole development programme for a future hadron collider
Michael Tomsic Hyper Tech Research Inc.
- Speaker at Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems
Yujin Tong Lanzhou University
- Speaker at Quench propagation and degradation limits of pre-strained HTS tapes with a spot heater
Fernando Toral Centro de Investigaciones Energéti cas Medioambientales y Tecno
- Speaker at Magnetic and mechanical design of a 16 T common coil dipole for FCC
- Speaker at Design of a dipole with longitudinally variable field using permanent magnets for CLIC damping rings
- Speaker at Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
Alexandre Torre CEA
- Speaker at Comparisons of critical currents of 48-strand Nb3Sn cables-in-conduit with various twist pitch sequences
Jack Toth National High Magnetic Field Laboratory (NHMFL)
- Speaker at Design for an Upgrade of the NHMFL 32-mm Bore Resistive Magnet
Ulf P. Trociewitz NHMFL-FSU
- Speaker at High Field Coil Technology with Bi-2212 Round Wire
Christophe Trophime LNCMI - CNRS
- Speaker at Comparative study between in-situ measurements and a 3D efficient model for the computation of magnetic fields in High Field Polyhelix magnets
Nicholaos Tsoupas Brookhaven National Laboratory
- Speaker at Modified Halbach Magnets in Medical Science Applications
Takehisa Tsurudome Sumitomo Heavy Industries, Ltd.
- Speaker at A Prototype of a 500 A class Bi-2223/AgAu Current Lead for a Conduction Cooled Superconducting Magnet
Simonetta Turtu' ENEA/ICAS
- Speaker at Lessons learnt by manufacturing 100 km of varied type of Cable-in-Conduit-Conductors
Oyunjargal Tuvdensuren Changwon National Univerisy
- Speaker at Heat load comparison of an HTS flux pump and a normal current lead in a module coil for a 12 MW wind power generator
Andrew Twin
- Speaker at An Engineering Perspective on Ultra High-Field Magnets
Hiroshi Ueda Okayama University
- Speaker at Diffusion process of screening current in REBCO coil wound with copper-plated muti-filamentary REBCO tape
Toru Ueki Meiji university
- Speaker at Experimental Study on the Mechanical Stress Effect on the Degradation of High Temperature Superconducting Coils
Takeshi Ueno Sophia University
- Speaker at Development of a REBCO innermost coil for a persistent 400 MHz (9.39 T) LTS/REBCO NMR magnet
Davide Uglietti
- Speaker at Progresses in cable in conduit for fusion magnets: from ITER to DEMO
- Speaker at Stacked tape HTS conductors for Fusion Magnets
UNKNOWN UNKNOWN
- Speaker at A novel quench detection method using radio frequency wave technology
UNKNOWN UNKNOWN
- Speaker at The FuSuMaTech initiative: Synergy with Industry and Impact on the Future Superconducting Magnet Technology
Giovanni Valesi ASG superconductors SpA
- Speaker at MgB2 superconductive short winding joints: mathematical prevision of current behaviours and experimental validations
Roser Vallcorba CEA - Saclay
- Speaker at Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
Cynthia VALLERAND Linear Accelerator Laboratory
- Speaker at Simulations, measurements and sorting of THOMX ring bending magnets.
Giorgio Vallone CERN
- Speaker at Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Speaker at Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
Danko van der Laan Advanced Conductor Technologies
- Speaker at High-temperature superconducting CORC® magnet cable and wire development and their application
Hans van Eck Dutch Institute for Fundamental Energy Research (DIFFER)
- Speaker at A 2.5 T, 1.25 m free bore superconducting magnet for the Magnum-PSI linear plasma generator
Lou van Lieshout
- Speaker at Driving and protecting superconducting hybrid magnets
Jeroen Van Nugteren
- Speaker at Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications
- Speaker at E3SPreSSO: A Quench Protection System for High-Field High-Temperature Superconducting Magnets
Gueorgui Velev FNAL
- Speaker at Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
Vjeran Vrankovic Paul Scherrer Institute
- Speaker at SwissFEL Beam Dump Dipole Spectrometer Simplistic Design Backed by Accurate Magnetic Field Measurements
Lei Wang Intitute of Electrical Engineering, Chinese Academy of Sciences
- Speaker at Stress-Strain Analysis in a 10 T non-Insulated GdBCO HTS Coil for the 25 T All-superconducting NMR Magnet
Yawei Wang University of Bath
- Speaker at A 3D quench model for high temperature superconductor CORC cable based T-A formulation
- Speaker at Joule loss of insert no-insulation high temperature superconductor magnet induced by the ramping operation of outer magnet.
- Speaker at Non-uniform ramping loss distribution of multiple no-insulation REBCO magnet
- Speaker at Ripple field effects on the no-insulation rotor windings of high temperature superconductor machines used in all electrical aircraft.
Zhen Wang Wuhan National High Magnetic Field Center,Huazhong University of Science and Technology
- Speaker at Experimental and numerical investigations on the separation behavior of magnetic particles under an alternating gradient magnetic field
Qiuliang Wang
- Speaker at A Novel Passive Shim Design Method for Biplanar MRI Magnet
- Speaker at Bending-peeling method to measure interface strength of YBCO tape
- Speaker at Cryogenic Oscillating Heat Pipe for Conduction-cooled Superconducting Magnets
YuBin Wang
- Speaker at Design and Analysis of a Self-Prevention Quench Double-Stator HTS Machine with Stationary Seal
Yinshun Wang North China Electric Power University
- Speaker at Experimental Research on Out-of-plane Bending Characteristics of Critical Current for 2G Tapes
Xiaorong Wang Lawrence Berkeley National Laboratory
- Speaker at Development and test of REBCO canted cosθ dipole coils with CORC® wires
Zuoshuai Wang
- Speaker at Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method
- Speaker at Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance
QINGYAN WANG Jingling Institute of Technology
- Speaker at Multi Objective Design Optimization of Permanent Magnet Driver Based on PSO Algorithm and Nonlinear Equivalent Magnetic Model
Shuang Wang Huazhong University of Science and Technology
- Speaker at Development of the Decoupling Transformer for the 100 T Magnetic Field System at the Wuhan National High Magnetic Field Center
Bangzhu Wang Beijing Jiaotong University
- Speaker at Study on quench and recovery characteristics of non-inductive YBCO coil under DC overcurrent
Wei Wang Sichuan University
- Speaker at Accurate Measurement of the Superconducting Current in 2G HTS Coil with Rogowski coil in Cryogenic Environment
- Speaker at CHARGING 2G HTS DOUBLE PANCAKE COILS WITH THE HTS FLUX PUMP METHOD
Chengtao Wang IHEP,CAS
- Speaker at Electromagnetic Design of a Twin-Aperture Quadrupole Magnet with Common-Coil Configuration
Tao Wang
- Speaker at A Method for Designing an HTS Magnet Processes High-Performance and High Thermal Stability
Chuan Wang China Institute of Atomic Energy
- Speaker at Superconducting Coil system R&D for a 230 MeV Superconducting Cyclotron
Zuoshuai Wang Huazhong University of Science and Technology
- Speaker at Simulation and Experiment of HTS Coils with a New Structure as Inductors in STRETCH Meat Grinder Circuit
Shiyuan Wang Jiangsu University
- Speaker at A New Mover Separated Linear Magnetic-Field Modulated Motor With Improved Power Factor Using Auxiliary DC Exciting Windings
- Speaker at Analysis of Novel Mover Partitioned Linear Magnetic-Field Modulated Motors Having Single or Double Layer Windings
Yibai Wang Beihang University
- Speaker at Applied solenoid coils effects on the ignition experiments of an MPD thruster
Meng Wang North China Electric Power University
- Speaker at Current Transfer Length between Current Lead and Quasi-isotropic Strand Consisting of 2G HTS Tapes
Fangqun Wang Jiangsu University
- Speaker at Design and Analysis of a Bearingless Permanent-Magnet Motor for Axial Blood Pump Applications
Li wanjie Institute of electrical engineering, Chinese academy of science
- Speaker at A high rotation speed big air-gap axial-flux eddy-current coupler for HTS flywheel energy storage system
david warren Oxford Instruments
- Speaker at LOW VIBRATION VAPOUR SHIELDED CRYOSTATS FOR WIDE BORE HIGH FIELD MAGNETS
Tomonori Watanabe Chubu.Electric.Power Co., Inc.
- Speaker at Development of Conduction-cooled Superconducting Split Coil for Metal Melting by DC Induction Heating
Shaoqing Wei Uiduk University
- Speaker at A Study on the Sextupole Design with Iron Yoke inside Solenoids for 56 GHz ECR Ion Source
Hubertus Weijers NHMFL/FSU