MT25 Conference 2017

from Sunday, 27 August 2017 (01:30) to Friday, 1 September 2017 (21:30)
RAI Congress Center, Amsterdam, The Netherlands

        : Sessions
    /     : Talks
        : Breaks
27 Aug 2017
28 Aug 2017
29 Aug 2017
30 Aug 2017
31 Aug 2017
1 Sep 2017
08:00 --- Registration Desk Open from 8:00 to 18:30 ---
08:20 --- Exhibition Open from 9:00 to 18:30 ---
Conference Opening (until 09:15) ()
Monday Morning Plenary: ITER project (until 10:00) ()
09:15 Overall Status of the ITER Project - Bernard Bigot (ITER International Organization)   ()
10:00 --- Break ---
Mon-Mo-Or1 (until 12:15) ()
10:30 Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test - Glyn Kirby (CERN)   ()
10:45 Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade - Michinaka Sugano   ()
11:00 Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation - Ezio Todesco (CERN)   ()
11:15 Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC - Mr. Jesús Angel García-Matos (CIEMAT) Dr. Fernando Toral (CIEMAT)   ()
11:30 Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan - massimo sorbi (Milan University & INFN-LASA)   ()
11:45 Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC - Pasquale Fabbricatore (Universita e INFN Genova (IT))   ()
12:00 A Statistical Analysis of Electrical Faults in the LHC Magnets - Jean-Philippe Tock (CERN)   ()
Mon-Mo-Or2 (until 12:15) ()
10:30 [Invited] Progress in the Construction of the 43 T Hybrid Magnet at LNCMI-Grenoble - Dr. Pierre Pugnat (CNRS-LNCMI, Grenoble, France)   ()
11:00 The commissioning of the outert superconducting magnet for a hybrid magnet at CHMFL - Dr. Yunfei Tan   ()
11:15 Design of the resistive insert coils for the HFML 45 T Hybrid Magnet - Dr. Frans Wijnen (Radboud University Nijmegen)   ()
11:30 An Engineering Perspective on Ultra High-Field Magnets - Andrew Twin   ()
11:45 Commissioning of the 36 T Series-Connected Hybrid Magnet at the NHMFL - Mark Bird (FSU)   ()
12:00 Ultimate Forces of the Grenoble Hybrid Magnet - Dr. Hans Schneider-Muntau (S-M CS&T)   ()
Mon-Mo-Or3 (until 12:15) ()
10:30 Mechanical–electric Model for Multifilament Composite Superconducting Strands - Prof. Yuanwen Gao (Lanzhou University)   ()
10:45 Numerical investigation on the thermo-electro-mechanical behavior of HTS tapes - Daniela Boso (University of Padova)   ()
11:00 Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole. - Michael Daly (CERN)   ()
11:15 Structural Behavior of KSTAR CS Magnet during Plasma Operation - Mr. Hee-Jae Ahn (NFRI)   ()
11:30 Fatigue failure analysis of a 60T pusled magnet at the WHMFC - Dr. Quqin Sun (Institute of Fluid Physics, China Academy of Engineering Physics)   ()
11:45 Real-time functional diagnostics of superconducting magnets using acoustic techniques - Maxim Marchevsky (Lawrence Berkeley National Lab. (US))   ()
12:00 Ultra-sensitive TMR-superconducting mixed sensors - Dr. Yue Wu (INSTITUTE OF ELECTRICAL ENGINEERING,CHINESE ACADEMY OF SCIENCES )   ()
08:00 --- Registration Open from 8:00 to 21:00 ---
08:20 --- Exhibition Open from 9:00 to 21:00 ---
Tue-Mo-O10 (until 10:15) ()
08:45 Superconducting Undulators Toward Commercial Products - Cristian Boffo (Babcock Noell GmbH)   ()
09:00 Magnetic field measurements of full scale conduction cooled superconducting undulator coils - Dr. Sara Casalbuoni (IBPT-KIT)   ()
09:15 The Design of Magnetic Needles for Improving Magnetic Field Measurement System - Cheng-Ying Kuo (NSRRC)   ()
09:30 Development of low resistance splicing between Nb3Sn and NbTi wires to make superconducting wigglers on the base of Nb3Sn superconductor - Alexey Bragin (Budker Institute of Nuclear Physics)   ()
09:45 Status of Magnet System for CSNS RCS - Dr. Wen Kang (Institute of High Energy Physics (IHEP))   ()
10:00 New design of a pulse magnet for the J-PARC RCS injection shift bump magnet - Dr. Tomohiro Takayanagi (JAEA/J-PARC)   ()
Tue-Mo-Or11 (until 10:15) ()
08:45 [Invited] Recent Progress of Superconducting Induction Heater with HTS magnets in Korea - Dr. Jongho Choi (Supercoil Co., Ltd.)   ()
09:15 Research Progress on Jointless Stack Pancake Superconducting coils at SJTU and SSTC - Dr. Wei Wu (Shanghai Jiao Tong University)   ()
09:30 The limits of space radiation magnetic shielding - Riccardo Musenich (Universita e INFN Genova (IT))   ()
09:45 Study on Electromagnetic Force Distribution and Material Forming Performance in Electromagnetic Tube Expansion with Concave Coils - Dr. Li Qiu Dr. Li Qiu   ()
10:00 Investigation of Design Considerations for an Electromagnetic Induction Coilgun System - Prof. In-Keun Yu (Changwon National Univerisity)   ()
Tue-Mo-Or12 (until 10:15) ()
08:45 High-speed thermal imaging of quench propagation in HTS tapes using temperature-sensitive fluorescent films - Roland Gyuráki (Karlsruhe Institute of Technology)   ()
09:00 Quench propagation and degradation limits of pre-strained HTS tapes with a spot heater - Mr. Yujin Tong (Lanzhou University)   ()
09:15 Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements. - Tiina Salmi (Tampere University of Technology, Finland)   ()
09:30 Quench Behaviour of the HL-LHC Twin Aperture Orbit Correctors - Matthias Mentink (CERN)   ()
09:45 Experience and modelling of quench propagation along the JT-60 SA TF coils Cable In Conduct Conductor - Dr. Walid Abdel-Maksoud (CEA)   ()
10:00 Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils - Mr. Kabindra Bhattarai (Applied Superconductivity Center-NHMFL)   ()
10:15 --- Break ---
Tue-Mo-Or13 (until 12:15) ()
10:45 Completion and test of the first ITER TF coil winding pack by Europe - Mr. Alessandro Bonito Oliva (Fusion for Energy)   ()
11:00 Series Production of ITER TF Coil Winding Pack in Japan - Dr. Norikiyo Koizumi (National Institutes for Quantum and Radiological Science and Technology)   ()
11:15 Test of ITER-TF joint samples with NIFS test facilities - Dr. Shinsaku Imagawa (National Institute for Fusion Science)   ()
11:30 Tcs Measurement Result of ITER Toroidal Field Insert Coil Tested in 2016 - Hidemasa Ozeki (National Institutes for Quantum and Radiological Science and Te)   ()
11:45 Manufacture of the ITER Central Solenoid components - Mr. Paul Libeyre (ITER Organization)   ()
12:00 Status of the ITER In-vessel Coils System and Progress on the Qualification of the In-Vessel Coil Conductor - Dr. Anna Encheva (ITER IO)   ()
Tue-Mo-Or14 (until 12:30) ()
10:45 [Invited] HTS field coils with robust design for a superconducting wind turbine generator - Markus Bauer (THEVA Dünnschichttechnik GmbH)   ()
11:15 Hardware integration and performance analysis of a 10 kW HTS wind power generator with brushless exciter - Hae-Jin Sung (Changwon National University)   ()
11:30 In-vacuum magnet technology inspired from semiconductor equipment - Mr. Ton Peijnenburg (VDL Enabling Technologies Group)   ()
11:45 Measurement of Magnetic Materials at Room And Cryogenic Temperature for Their Application to Superconducting Wind Generators - Yingzhen Liu (ITEP, KIT)   ()
12:00 Design and Test of a superconducting levitation system for gravity measurement - Dr. Xinning Hu (1Institute of Electrical Engineering, Chinese Academy of Sciences)   ()
Tue-Mo-Or15 (until 12:15) ()
10:45 32T Protection Design and Operation - Patrick Noyes (FSU-NHMFL)   ()
11:00 Quench detection via Rayleigh backscattering interrogated optical fibers - Federico Scurti (NCSU)   ()
11:15 Design and Manufacturing of the First Industrial-Grade CLIQ Units for the Protection of Superconducting Magnets for the High-Luminosity LHC Project at CERN - Felix Rodriguez Mateos (CERN)   ()
11:30 Quench (Thermal Runaway) Protection of Bi2223 (DI-BSCCO) Magnets - Eiji Shizuya (Sumitomo Electric Industries, Ltd.)   ()
11:45 Dynamic strain characteristics and responds in a LTS sextupole magnet during excitation and spontaneous quench - Dr. Mingzhi Guan (Institute of Modern Physics, Chinese Academy of Sciences )   ()
12:00 Magnet quench protection of the FCC-hh 16 T block-type dipole magnet by means of quench absorption coils - Matthias Mentink (CERN)   ()
08:00 --- Registration Desk Open from 8:00 to 18:30 ---
08:20 --- Exhibition Open from 9:00 to 18:30 ---
Wednesday Morning Plenary Orals (until 09:45) ()
08:45 Development of Carbon-Ion Radiotherapy Facilities at NIRS - Iwata Yoshiyuki (National Institute of Radiological Sciences (NIRS))   ()
09:15 High Magnetic Field Science and Technology - Greg Boebinger (National High Magnetic Field Laboratory / Florida State University)   ()
Wednesday Morning Special Short Plenary Orals (until 10:15) ()
10:15 --- Break ---
Wed-Mo-Or19 (until 12:15) ()
10:45 Twin aperture bending magnets and quadrupoles for FCC-ee - Attilio Milanese (CERN)   ()
11:00 Design of a dipole with longitudinally variable field using permanent magnets for CLIC damping rings - Fernando Toral (Centro de Investigaciones Energéti cas Medioambientales y Tecno) Manuel Angel Dominguez Martinez (Ciemat)   ()
11:15 Status and realization of an high efficiency transport beamline for laser-driven ion beams - Mr. Francesco Schillaci (Institute of Physics Czech Academy of Science, ELI-Beamlines)   ()
11:30 Development of prototype high gradient small aperture quadrupole magnets for HEPS-TF - Yingshun Zhu (Institute of High Energy Physics,Chinese Academy of Sciences)   ()
11:45 Permanent Magnet Dipoles For the ESRF Upgrade - Dr. Joel Chavanne (European Synchrotron Radiation Facility) Dr. Chamseddine Benabderrahmane (European Synchrotron Radiation Facility)   ()
12:00 Tuneable permanent magnets: Power saving solutions for the next generation of high energy accelerators. - Alexander Bainbridge (STFC)   ()
Wed-Mo-Or20 (until 12:15) ()
10:45 Conductor for MRI magnets beyond NbTi - Dr. Michael Parizh (GE Global Research)   ()
11:00 Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System - Dr. Lionel Quettier (CEA Saclay)   ()
11:15 Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm - Sadanori Iwai (Toshiba Corporation)   ()
11:30 Development of 3 T high-temperature superconducting magnet for MRI - Dr. Masayoshi Oya (Mitsubishi Electric Corporation)   ()
11:45 Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications - Mike Sumption (The Ohio State University)   ()
12:00 MRI scanner development in Russia - Timophey Demikhov (Lebedev Physics Institute)   ()
Wed-Mo-Or21 (until 12:15) ()
10:45 Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet. - Anna Kario (KIT)   ()
11:00 High-temperature superconducting CORC® magnet cable and wire development and their application - Danko van der Laan (Advanced Conductor Technologies)   ()
11:15 Bending of CORC cables, Experiments and Modeling - Anvar Valiyaparambil Abdulsalam (University of Twente)   ()
11:30 Influence of field cycle and applied current on coated conductor magentization and decay for accelerator applications - Mike Sumption (The Ohio State University)   ()
11:45 Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets - Tim Mulder (University of Twente (NL))   ()
12:00 Evolution of AC loss, inter-strand resistance and mechanical properties in prototype EU DEMO TF conductors during 30,000 load cycles - Dr. Konstantin Yagotintsev (University of Twente)   ()
08:00 --- Registration Desk open from 8:00 to 18:30 ---
08:20 --- Exhibition Open from 9:00 to 18:00 ---
Thu-Mo-Or28 (until 10:30) ()
08:45 [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps - Lucio Rossi (CERN)   ()
09:15 Status of the 16 T dipole development programme for a future hadron collider - Davide Tommasini (CERN)   ()
09:30 Cold powering test results of the Nb3Sn FRESCA2 block coil magnet - Gerard Willering (CERN)   ()
09:45 The US Magnet Development Program for High Field Accelerator Magnet R&D - Soren Prestemon (Lawrence Berkeley National Laboratory)   ()
10:00 Design, Construction and Test of HTS/LTS Hybrid Dipole - Ramesh Gupta (BNL)   ()
10:15 High-field dipoles using superconducting cable-in-conduit - Peter McIntyre (Texas A&M University)   ()
Thu-Mo-Or29 (until 10:30) ()
08:45 A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K - Philip Michael (MIT Francis Bitter Magnet Laboratory)   ()
09:00 The Study of Pulsed Strong Magnetic Field Measurement System based on Distributed Magnetic Field Sensors - Prof. Zhenhua Li (China Three Gorges University, College of Electrical Engineering & New Energy, Yichang, China)   ()
09:15 Temperature dependent behaviour of a barrel-type HTS dynamo - Chris Bumby (Victoria University of Wellington)   ()
09:30 Design and Test of the Cryogenic Cooling System for the Rotating Magnetic Validator of the 10 MW SUPRAPOWER Offshore Superconducting Wind Turbine - Jiuce Sun (KIT)   ()
09:45 CRYOGENIC ENVIRONMENTS FOR QUANTUM TECHNOLOGIES - Dr. Ziad Melhem (Oxford Instruments NanoScience)   ()
10:00 Hub- and Site-cooling of MRI magnets using a mobile cryogenic system - Dr. Anders Mortensen (Siemens Magnet Technology)   ()
10:15 Cryogenics Engineering for Superconducting Magnets at DEMACO - Mrs. Rossi Mendez (Sales Engineer )   ()
Thu-Mo-Or30 (until 10:30) ()
08:45 Nb3Sn strand designs and heat treatments for high field magnet applications - Dr. Michael Field (Bruker OST)   ()
09:00 Advanced tube type Nb3Sn conductor and its applications in Hyper Tech - Xuan Peng (Hyper Tech Research Inc.)   ()
09:15 Effect of strand diameter, magnetic field and injection length on the current entrance length of internal tin strand - Chao Zhou (U)   ()
09:30 Development of Nb3Sn strands and Rutherford Cables for 16 T Accelerators Magnets - Emanuela Barzi (Fermilab)   ()
09:45 Recent Progress of Application-Oriented DI-BSCCO Wires - Dr. Takayoshi Nakashima (Sumitomo Electric Industries, Ltd.)   ()
10:00 Present status of Bi-2212 conductor technology - David Larbalestier (National High Magnetic Field Laboratory)   ()
10:15 MgB2 cables from wires made PIT and IMD process. - Dr. Pavol Kováč (Institute of Electrical Engineering of SAS)   ()
10:30 --- Break ---
Thu-Mo-Or31 (until 12:45) ()
11:00 Electromagnetic Design of HTS insert for NMR Magnet in Consideration of Screening Currents - Dr. Yi Li (Intitute of Electrical Engineering, Chinese Academy of Sciences)   ()
11:15 HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2 - Glyn KIRBY   ()
11:30 Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet - Mr. Thomas Painter (Magnet Science & Technology-NHMFL)   ()
11:45 Compact, high field coils made with strong, rectangular Bi2212 superconductor wire - Dr. Alexander Otto (Solid Material Solutions, LLC)   ()
12:00 High Field Coil Technology with Bi-2212 Round Wire - Ulf Trociewitz (NHMFL)   ()
12:15 Performance of two-ply four-filaments Gd123 tape coil - Prof. Satoshi Awaji (HFLSM, IMR, Tohoku University)   ()
12:30 Characterisation of HTS insulated coil for high field insert - Tara Benkel (CNRS)   ()
Thu-Mo-Or32 (until 12:45) ()
11:00 Measurement of persistent current Gd123 coil for superconducting joint fabricated by CJMB method - Xinzhe Jin (Muroran Institute of Technology)   ()
11:15 10 kA joints for Multi-Tape HTS Cables - Jaakko Samuel Murtomäki (Tampere University of Technology (FI))   ()
11:30 Contact resistance between REBCO tapes coated with a thin resistive layer - Dr. Jun Lu (NHMFL)   ()
11:45 Superconducting HTS joints for connecting strong Bi2212 wires - Dr. Alexander Otto (Solid Material Solutions, LLC)   ()
12:00 Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet - Mr. Young-Gyun Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)   ()
12:15 Open Material Property Library With Native Simulation Tool Integrations (OpMaST) - Antti Aleksis Stenvall   ()
12:30 High Modulus Reinforcement Materials - Dr. ke han   ()
Thu-Mo-Or33 (until 12:45) ()
11:00 Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet - Dr. Emmanuele Ravaioli (LBNL) Heng Pan (LBNL)   ()
11:15 Errors and optics study of a permanent magnet quadrupole system - Mr. Francesco Schillaci (Institute of Physics Czech Academy of Science, ELI-Beamlines)   ()
11:30 Coupling of Mechanical and Magneto-Thermal Models of Superconducting Magnet by Means of Mesh Based Interpolation - Bernhard Auchmann (CERN)   ()
11:45 Coupled AC loss and thermal modeling in REBCO windings containing more than 10000 turns - Dr. Enric Pardo (IEE Slovak Academy of Sciences)   ()
12:00 Multiphysics FEA Led Design of Bi-2212 Round Wire Prototype Coils - Dr. Ernesto Bosque (NHMFL-ASC)   ()
12:15 Finite-element models for fast cycling magnets with homogenization of laminated yokes - Herbert De Gersem (TU Darmstadt)   ()
12:30 LEDET-ANSYS coupled modeling of transients in superconducting magnets - Dr. Lucas Brower (LBNL)   ()
08:00 --- Technical Visits scheduled starting at the square in front of the RAI Conference Center ---
08:30 --- 1. Technical Visit 1 to NIKHEF - Amsterdam ---
08:31 --- 2. Technical Visit 2 to ESTEC - Noordwijk ---
08:33 --- 3. Technical Visit 3 to Philips HealthCare and DIFFER - Eindhoven ---
08:33 --- 4. Technical Visit 4 to HFML & FELIX - Nijmegen ---
08:34 --- 5. Technical Visit 5 to Applied Superconductivity and Cyogenics Group and MESA+ at University of Twente - Enschede ---
16:00 --- Registration Desk Open from 16:00 to 21:00 ---
19:00 --- Welcome Reception ---
12:15 --- Lunch ---
Mon-Af-Po1.01 (until 15:00) ()
13:15 A Proposal to Accelerate Training of Nb3Sn Accelerator Magnets via Capacitive Discharge - Bernhard Auchmann (CERN)   ()
13:15 Assembly and test of the support structure for the subscale dipole magnet FECD1 - Zhang Kai (IHEP)   ()
13:15 Beam Trajectory Simulation Considering Each Harmonic Components in HTS Quadruple Triplet - Mr. zhan zhang (Uiduk University)   ()
13:15 Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4m Long MQXF Coil. - Dr. Joseph F Muratore (Brookhaven National Laboratory)   ()
13:15 Experimental and numerical investigation on losses in electrodynamic transients in a Nb3Sn prototype race-track coil - Prof. Marco Breschi (University of Bologna, Italy)   ()
13:15 Fabrication and assembly of the shell-based structure for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the HL-LHC - Dr. Friedrich Lackner   ()
13:15 Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC - Friedrich Lackner (CERN)   ()
13:15 Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement - Dr. Arnaud Foussat (CERN)   ()
13:15 Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC - Lucio Fiscarelli (CERN)   ()
13:15 Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC - Lucio Fiscarelli (CERN)   ()
13:15 Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training - Etienne Rochepault (CERN)   ()
13:15 Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source - Mariusz Juchno (LBNL)   ()
13:15 Quench Location in the LARP MQXFS1 prototype - Giorgio Ambrosio (Fermilab)   ()
13:15 Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC - Susana Izquierdo Bermudez (CERN)   ()
Mon-Af-Po1.02 (until 15:00) ()
13:15 A passively shielded HTS magnet for polarized neutron scattering - Taotao Huang (HTS-110 Ltd)   ()
13:15 Canted Cosine Theta Solenoid Design Alternative for the Magnet System of IAXO, the International Axion Observatory Helioscope - Riccardo Musenich (Universita e INFN Genova (IT))   ()
13:15 Commissioning of the R3B-Glad superconducting dipole magnet - Mr. Bernard GASTINEAU (Irfu, CEA Saclay, Gif-sur-Yvette, France)   ()
13:15 Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab - paul brindza (jeffersonLab)   ()
13:15 Design and commissioning of the SHMS Spectrometer Support Systems at Jefferson Lab - Mr. Steven Lassiter (JLAB)   ()
13:15 Design of solenoid magnet for Large Acceptance Multi-Purpose Spectrometer of RISP - Mr. Inwoo Chun (Korea University)   ()
13:15 Design, Fabrication, and Test Results of an 18 T Metal Cladding GdBCO Magnet for Axion Detector - Mr. Jaemin Kim (SuNAM Co., Ltd.)   ()
13:15 Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles - Amaury PORHIEL (Sigmaphi)   ()
13:15 FCC-hh Detector Magnet Cryostats and Cold Mass Suspension system - Helder F. P. Silva   ()
13:15 Instrumentation and Control Selection for the Hall-B Superconducting Magnets at Jefferson Lab - Dr. Probir Ghoshal (Jefferson Lab)   ()
13:15 Magnet System for the BabyMIND Neutrino Detector at J-PARC - Alexey Dudarev (CERN)   ()
13:15 Operational experience with the combined solenoid/dipole magnet system of the COMPASS Experiment at CERN - Erwin Roland Bielert (Univ. Illinois at Urbana-Champaign (US))   ()
13:15 Status of Design and Manufacturing of PENELOPE neutron trap - Cristian Boffo (Babcock Noell GmbH)   ()
Mon-Af-Po1.03 (until 15:00) ()
13:15 A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study - Jiho Lee (Massachusetts Institute of Technology)   ()
13:15 Controllability of the contact resistance of 2G HTS coil with metal insulation - Dr. Myung-Hwan Sohn (Korea Electrotechnology Research Institute)   ()
13:15 Cryo-free multisection superconducting magnetic system with MgB2 coil - Dmitry Abin (NRNU MEPhI)   ()
13:15 Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K - Mr. Kyle Radcliff (Applied Superconductivity Center-NHMFL)   ()
13:15 Direct current decay in a closed YBCO No-insulation coil under external AC magnetic field - Mr. Jun Ma (Cambridge University )   ()
13:15 Experimental study of eliminating the screening-current-induced-field in non-insulated HTS coils - Fei Liang (Bath University)   ()
13:15 Joule loss of insert no-insulation high temperature superconductor magnet induced by the ramping operation of outer magnet. - Yawei Wang (University of Bath)   ()
13:15 Optimal Design Methodology of Multi-Width HTS Magnet - Min Cheol Ahn (Kunsan National University)   ()
13:15 Quench Behaviour of Bi2Sr2CaCu2O8+x insert coils for high field magnets - Mr. Steven Ball (Oxford Instruments)   ()
13:15 Stress and Strain Management of a Solenoid Coil Wound with Overpressure Processed Rectangular Bi-2212 Wire with Metallic Reinforcement Lamination - Dr. Youngjae Kim (National High Magnetic Field Laboratory)   ()
13:15 Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging - Dr. Jae Young Jang (Korea Basic Science Institute)   ()
Mon-Af-Po1.04 (until 15:00) ()
13:15 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device - Mr. Ji Hyung Kim (Jeju National University)   ()
13:15 A Multi-Phase Doubly-Fed Doubly-Salient HTS Linear Motor for Vertical Transportation - Mr. Rui Li (Shenzhen University)   ()
13:15 A new dual air-gap linear permanent magnet vernier machine using ring type windings - Fangfang Bian (Jiangsu University)   ()
13:15 A Novel Flux-Reversal Linear Permanent Magnet Machine with Consequent-pole Permanent Magnets and HTS Bulks - Chaojie Shi (Huazhong University of Science and Technology)   ()
13:15 A novel non-salient pole rotor to improve self-starting performance of line start PM synchronous motor - Mr. Mengxuan Lin (Huazhong University of Science and Technology)   ()
13:15 A Novel PM Machine with bi-polar PWM Magnet Array - Mr. Kangfu Xie (Huazhong University of Science & Technology)   ()
13:15 A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system - Mr. Gang Seok Lee (Hanyang Univ.) Kyoung-Jin Joo   ()
13:15 A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system - Mr. Gang Seok Lee (Hanyang Univ.) Kyoung-Jin Joo   ()
13:15 A Study on the New Skew Methodology by Cross-Stacking in Spoke type Ferrite Magnet Motor - Prof. Won-Ho Kim (Gachon University)   ()
13:15 A Study on the Optimal Design of Step Skew Considering End Effect and Interaction Between Layers in Step Skew - Prof. SUNG GU LEE (Busan University of Foreign Studies)   ()
13:15 A Study on the Position Signal Compensation Control Technique of Hall Sensor Generated by Uneven Magnetic Flux Density - JONGSUK LIM (Hanyang university)   ()
13:15 A Synthetic Frozen Permeability Method to Separate PM torque in Hybrid Permanent Magnet Variable-Flux Machine - Ms. Meng Ge (Huazhong University of Science & Technology)   ()
13:15 A transverse flux single-phase tubular switched reluctance linear motor - Hao Chen (China University of Mining & Technology)   ()
13:15 Analysis and comparison of dual stator linear primary permanent magnet vernier machine and fault-tolerant linear vernier machine - Fangfang Bian (Jiangsu University)   ()
13:15 Analysis of Magnetic Polarity Distribution for a Dual-rotor Switched Reluctance Machine - Hao Chen (China University of Mining & Technology)   ()
13:15 Analysis of Novel Mover Partitioned Linear Magnetic-Field Modulated Motors Having Single or Double Layer Windings - Mr. Shiyuan Wang (Jiangsu University)   ()
13:15 Analysis of Unequal Magnetization of Ferrite Spoke-Type PMSM for Post-Assembly Magnetization - Sooyoung Cho (Hanyang University)   ()
13:15 Analytical Polynomial Models of Nonlinear Magnetic Flux Linkage for Switched Reluctance Motor - Hao Chen (China University of Mining & Technology)   ()
13:15 Cogging Torque Minimization of Surface Mounted Permanent Magnet Machines with Variable Pole-Arc Magnet in Axial Direction - Prof. Jian Li   ()
13:15 Comparison of output characteristics of PMSM for EV according to water cooling and oil cooling - Soo-Jin Jung (LG Electronics)   ()
13:15 Design and analysis of a modular HTS linear flux-switching machine for rail transit applications - Dr. Xianglin Li (China University of Petroleum)   ()
13:15 Design and Analysis of A Novel Modular-Stator Tubular Vernier Permanent-Magnet Machine - Ms. Tian Yao (School of Electrical and Information Engineering, Jiangsu University)   ()
13:15 Design and Analysis of an Arc-teeth Permanent Magnet Linear Synchronous Motor for Direct-drive Application - Dr. Rong Guo (School of Electrical Engineering, Southeast University)   ()
13:15 Design and Analysis of Multi-Degree-of-Freedom Spherical Motor to Improve Output Torque - Sooyoung Cho (Hanyang University)   ()
13:15 Design and Initial Results of a Novel in-situ A.C. loss Measurement in Axial Flux Synchronous Machine - Mr. Jay Patel (University of Bath)   ()
13:15 Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System - JONGSUK LIM (Hanyang university) Mr. Gang Seok Lee (Hanyang Univ.)   ()
13:15 Design method of Counter rotating Dual Rotor type PMSM - Jae-Kwang Lee (hanyang university)   ()
13:15 Design method of PMa-SynRM to improve power density - Jae-Kwang Lee (hanyang university)   ()
13:15 Design of Asymmetric Arc Linear Permanent-Magnet Synchronous Motor for Large Telescope-Drive Application - Jiaming Jiang   ()
13:15 Design of Dual-Channel Switched Reluctance Motor for Safety-Critical Applications Using Two 3-Phase Standard Inverters - Qian Chen (Jiangsu University)   ()
13:15 Design of Vernier Motor considering Irreversible Demagnetization in Permanent Magnet - Dae-Woo Kim (SUNGKYUNKWAN UNIVERSITY)   ()
13:15 Design principle of WFSM for Electric Vehicle based magnetic-thermal equivalent circuit - Jae-Kwang Lee (hanyang university)   ()
13:15 Direct-Control Strategy for Bearingless Permanent Magnet Synchronous Motor - Wei Pan (Jiangsu University)   ()
13:15 Effect of Multi-phase Winding on Surface Permanent-Magnet Machine with Low Space Harmonics for Electric Steering Gear - Dr. Junqiang Zheng (Jiangsu university)   ()
13:15 Effect of Pole and Slot Combination on Vibration of Spoke-Type Permanent Magnet Motors - Won-Ho Kim (Gachon University)   ()
13:15 Effect of Sub-Harmonics Reduction on Rotor loss in Permanent-Magnet Machines Considering Rotor Structures - Dr. Junqiang Zheng (Jiangsu University)   ()
13:15 Electromagnetic Analysis on Dual-Stator Switched Reluctance Motor - Hao Chen (China University of Mining & Technology)   ()
13:15 Electromagnetic Performances and Noise Analysis of IPMSM according to the Control Method under Flux-Weakening Region - Mr. Tae-Yong Lee (Sungkyunkwn Univ)   ()
13:15 Estimation of Permanent Magnet Temperature using d-axis Current for IPMSM - Chang-Sung Jin (Hanwha Techwin)   ()
13:15 Flux Characteristics Analysis of a Single-phase Tubular Switched Reluctance Linear Motor - Hao Chen (China University of Mining & Technology)   ()
13:15 High Efficiency Permanent Magnet Linear Synchronous Motor - Prof. Jian Li (Huazhong University of Science & Technology)   ()
13:15 Investigation and Optimization of the Field Regulation Capacity in a Hybrid Axial Field Flux-Switching Permanent Magnet Machine - Da Xu   ()
13:15 Irreversible permanent magnet demagnetization analysis of C-core flux reversal machines - Dr. Yuting Gao (Huazhong University of Science and Technology)   ()
13:15 New Modular Magnetic Equivalent Circuit of Dual-Permanent-Magnet-Excited Machine with Modulation Effect Consideration - Mr. Donghui Cao (School of Electrical and Information Engineering of Jiangsu University) Mr. Tong Liu (School of Electrical and Information Engineering of Jiangsu University)   ()
13:15 Numerical Analysis and Design of SPM Type Variable Flux Memory Motor Considering Magnetization and Demagnetization Characteristic of Permanent Magnet - Jin-Seok Kim (SUNGKYUNKWAN UNIVERSITY)   ()
13:15 Optimization of the Pole Piece in Coaxial Magnetic Gears for Transfer Torque Ripple Improvement - Dr. Sung-Jin Kim (Chosun University)   ()
13:15 Proposed Commutation Method for Performance Improvement of Brushless DC Motor - Chang-Sung Jin (Hanwha Techwin)   ()
13:15 Research on Harmonic Suppression Method of Permanent Magnet Synchronous Motor Based on Surrogate Model - Prof. Guangwei Liu (Shenyang University of Technology)   ()
13:15 Study on the design of a Very-high speed PM Motor/Generator for Electric-Turbo Compounding System - JONGSUK LIM (Hanyang university) Mr. Gang Seok Lee (Hanyang Univ.)   ()
13:15 SynRM Rib optimal Design method by Using RSM for High-Power Density - Mr. Jae-Kwang Lee (hanyang university)   ()
13:15 Transient Response Analysis on a 1.5-MW Class HTS Motor with Voltage Source Inverter under Electrical Fault Condition - Mr. Sang Heon Chae (Jeju National University)   ()
Mon-Af-Po1.05 (until 15:00) ()
13:15 A new all-superconducting electromagnetic launch system - Kun dong (southeast university)   ()
13:15 A Superconducting Linear Variable Reluctance Machine for Urban Transportation Systems - Dr. T.W. Ching (University of Macau)   ()
13:15 Analysis of dynamic deformation and disturbing torque of superconducting spinning rotor - Dr. Chunyan Cui (Institute of Electrical Engineering, Chinese Academy of Sciences)   ()
13:15 Analysis on end effect and levitation force calculation for radial-type superconducting magnetic bearings - Mr. Liwang Ai (Institute of Electrical Engineering, Chinese Academy of Sciences; University of Chinese Academy of Sciences)   ()
13:15 Capacity Allocation of a Superconducting Flywheel Storage System (SFES) in Hybrid Energy Storage System for Wind Generation - Mr. Rakkyung Ko (Korea University)   ()
13:15 Conceptual Design of the Suspension Structures for High-temperature Superconducting Magnets Deployed in Mobile Platforms - Changhong Hao (Tsinghua University)   ()
13:15 Decoupling Control Based on Linear/Nonlinear Active Disturbance Rejection Switching for 3 Degrees of Freedom HMB - Chenyin Zhao   ()
13:15 Decoupling Control of Bearingless Synchronous Reluctance Motor Based on Differential Geometry - Xiaoyan Diao (Jiangsu University)   ()
13:15 Design of Suspension Force Feedback Control System of Multiphase BPMSM Based on MRAS Inductance Parameter Identification - Yuemei Qin (Jiangsu university)   ()
13:15 Dynamic responses of levitated high-temperature superconductor with a strongly coupled thermo-electromagnetic model - Dr. Chang-Qing Ye (Southwest Jiaotong Universtiy)   ()
13:15 Dynamic Responses of Stacked coated conductor tapes Levitated above a Permanent Magnet Guideway - Mr. Kun Liu   ()
13:15 Electromagnetic Performance Optimization Design of 5-phase BPMSM Based on Third Harmonic Injection - Yuemei Qin (Jiangsu university)   ()
13:15 Improvement of the propulsion coils pitch and excitation method based on the magnetic gradient by the pinned flux in the permanent magnet-HTS hybrid magnetically levitated conveyance system - Prof. Shunsuke Ohashi (Kansai University)   ()
13:15 Levitation and guidance forces of CC-tape stacks - Maxim Osipov (NRNU MEPhI)   ()
13:15 Levitation Performance of Bulk YBCO and GdBCO Under a Low-Pressure Condition - Mr. Yong Zhang (Southwest Jiaotong University)   ()
13:15 Soft Sensing Modeling of Rotor Displacements Based on Continuous Hidden Markov Model - Yuemei Qin (Jiangsu university)   ()
13:15 The performance of magnetic suspension and motor/generator of a bearingless BLDCM for flywheel energy storage system - Yichen Liu (Jiangsu University)   ()
13:15 Weight reduction of the damper coils in the superconducting magnetically levitated bogie - Prof. Shunsuke Ohashi (Kansai University)   ()
Mon-Af-Po1.06 (until 15:00) ()
13:15 Conceptual Design and Evaluation of a HTS Magnet for a SMES Used in Improving Transient Performance of a Grid-Connected PV System - Dr. Lei Chen (Wuhan University)   ()
13:15 Design of a 30-K/4-kJ Solid Nitrogen Cooled HTS Magnet - Yi Li   ()
13:15 Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method - Zuoshuai Wang   ()
13:15 Electromagnetic-Structure Coupling Analysis of Transformers under Grounding Fault in 500 kV HVDC Converter Station - Dr. Bo Zhang (Hubei Electric Power Research Institute, State Grid Hubei Electric Power Company, SGCC) Dr. Quanliang Cao (Huazhong University of Science and Technology)   ()
13:15 Feasibility Study of MgB2 Cable for Pancake Coil of Energy Storage Device - Mr. Shinya Mizuno (Sophia Univ.)   ()
13:15 Manufacture and tests of a 1 MJ HTS Magnet for a SMES-FCL - Mr. Jingye Zhang (Institute of Electrical Engineering,Chinese Academy of Sciences)   ()
13:15 Modeling and Analysis of Parasitic Capacitance of High-Frequency High-Voltage Transformer Using Finite-Element Method - Le Deng (Wuhan National High Magnetic Field Center)   ()
13:15 Modeling and Validation of an HTS Partial Core Transformer - Hu Daoyu (Shanghai Jiao Tong University)   ()
13:15 Multi-objective filter designing for HTS SMES considering the voltage distribution characteristic - Mr. Liao Meng (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology)   ()
13:15 Optimal Design for Parasitic Capacitance of High Power High Frequency Fe-based Amorphous Planar Transformers - Dr. Yun Xu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 Optimization for transient model of HTS SMES magnet - Mr. Liao Meng (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology)   ()
13:15 Step-current method for improving energy storage density of superconducting magnet - Ms. Yalan Huang (sichuan university)   ()
13:15 Study on Integral Transformer / Reactor for Improving Power Density - Mr. SU YONG KIM (KETI)   ()
13:15 Superconducting properties of Prototype Pancake Coil using MgB2 Cable - Masaru Tomita (Railway Technical Research Institute)   ()
13:15 Test Winding of a 1-T Class Force-Balanced Coils Using High Temperature Superconducting Tapes - Mr. Hiroharu Kamada (Meiji University)   ()
Mon-Af-Po1.07 (until 15:00) ()
13:15 Analysis and Optimal Design of the Transmission Coils for the Wireless Power Transmission System - lantao huang   ()
13:15 Analysis of the coupling factor according to diameter of superconducting transmitting and receiving coils - NOA PARK (Chosun University)   ()
13:15 Asymmetry in wireless power transfer between a superconducting coil and a copper coil - Prof. Zhang GuoMin (Institute of Electrical Engineering Chinese Academy of Science) Hui Yu (Institute of Electrical Engineering Chinese Academy of Science; University of Chinese Academy of Science )   ()
13:15 Characteristics of SWPT according to the number of transmitting and receiver coils. - In-Sung Jeong (Chosun University)   ()
13:15 Decoupling Velocity and Thermal Effect in the Electromagnetic Ring Expansion Test - Ms. Jiawei Wu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 Design and Analysis of a New HTS Electromagnetic Screw - Zhijian Ling (Jiangsu University)   ()
13:15 Design and Analysis of a Superconducting Coil Magnet Applied for a Space Magnetoplasmadynamic Thruster - Prof. Wenjiang Yang (Beihang University)   ()
13:15 Design and Optimization of a Multi-pulse Electromagnetic Deep Drawing System - Dr. Lantao Huang (Xiamen University)   ()
13:15 Design and Performance Evaluation of a Large-scale HTS DC reactor for Bulk-Power Transmission - Dr. Sung-Kyu Kim (Korea Electrotechnology Research Institute)   ()
13:15 Design of a high temperature superconducting magnet for a single silicon crystal growth system - Mr. Van Quan Dao (Changwon National University)   ()
13:15 Design of maximum power density of TVC driving motor for space launch vehicle considering space environment - Hyun-Woo Jun (Hanyang University)   ()
13:15 Design of the Conduction-cooled YBCO Magnet for a MW Class Induction Heating System - Dong Zhang (Institute of Electrical Engineering, Chinese Acadmy of Sciences)   ()
13:15 Developemt of Magnetic Coupled-Connectorless Power Transfer System - Suyeon Cho (Korea Automotive Technology Institute)   ()
13:15 Development of high-temperature superconducting magnet for 1MW induction heater - Prof. Shaotao Dai (School of Electrical Engineering, Beijing Jiaotong University)   ()
13:15 Development of shot ball accelerator using coil gun principle for shot abrasive blasting processing - Hojoon Lee (Busan Institute of Science & Technology University) Sooyoung Cho (Hanyang University)   ()
13:15 Enhancement of trapped magnetic field using a large-size REBCO bulk in a desktop type superconducting bulk magnet - Dr. Kazuya Yokoyama (Ashikaga Institute of Technology)   ()
13:15 High speed displacement measurement based on electro-magnetic induction applied to electromagnetically driven ring expansion - Jiawei Wu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 Investigation of bulging behavior of metallic tube in electromagnetic forming process with a bias magnetic field - Xiaoxiang Li (Huazhong University of Science and Technology)   ()
13:15 Investigation of Mechanical Analysis for 1500A/400mH Toroid-Type HTS DC Reactor - Mr. Changhyung Lee (Changwon National University)   ()
13:15 Modeling and Analysis of Premagnetized Superconducting Docking Structure Based on an Improved Frozen-Image Method - Prof. Wenjiang Yang (Beihang University)   ()
13:15 Optimization Design of a Permanent Magnetic Actuator for 126kV Vacuum Circuit Breaker - Jiaming Jiang   ()
13:15 Performance improvement of a transverse-flux magnetic gear by using skew iron segments - Dr. Xianglin Li (China University of Petroleum)   ()
13:15 Reliability-Based Optimization of a Permanent Magnetic Actuator for Vacuum Circuit Breaker Considering Demagnetization Effect - Jiaming Jiang   ()
13:15 Torque Analysis and Experimental Verification of Synchronous Permanent Magnet Coupling with Halbach Arrays - Mr. Sung-Won Seo (Chungnam National University)   ()
Mon-Af-Po1.08 (until 15:00) ()
13:15 3D Stress-Strain Modeling of Nb3Sn wire - Dr. Jingping Chen   ()
13:15 A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand - Mr. Jiman Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)   ()
13:15 Changes of superconducting properties due to the unidirectional tensile deformation on bronze-processed Nb3Sn multifilamentary wires using various Cu-Sn-Zn ternary alloy matrices - Yoshimitsu Hishinuma (National Institute for Fusion Science)   ()
13:15 Comparisons of critical currents of 48-strand Nb3Sn cables-in-conduit with various twist pitch sequences - Mr. Alexandre Torre (CEA)   ()
13:15 Enhanced critical current densities in Nb3Sn superconducting strands prepared by bronze process - Dr. Ke Zhang (Western Superconducting Technologies Co. Ltd.)   ()
13:15 Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables - Prof. Ted Collings (MSE, The Ohio State University)   ()
13:15 Irreversible strain characteristics of technical RHQT Nb3Al superconductors - Nobuya Banno (National Institute for Materials Science)   ()
13:15 Low loss NbTi Superconducting Wires for the SIS100 Main Magnets made by Luvata - Mr. Mikael Holm (Luvata Pori Oy)   ()
13:15 Nb-rod-method Cu-Nb/Nb3Sn wires for practical React-and-Wind applications - Mr. Masahiro Sugimoto (Furukawa Electric Co., Ltd.)   ()
13:15 Ongoing efforts at internal-tin Nb3Sn strand with higher Jc and lower Qh for fusion application - Dr. Jianwei Liu (Western Superconducting Technologies, Co. Ltd.)   ()
13:15 Production of Aluminum Stabilized Superconducting Cable for the Mu2e Transport Solenoid - Vito Lombardo (Fermilab)   ()
13:15 Single-strand excitation for examining current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla - Chris Kovacs (The Ohio State University)   ()
13:15 Superconducting properties and microstructure of high performance Nb3Al wires fabricated by RHQT and mechanically alloyed methods - Prof. Yong Zhao   ()
13:15 The influence of heating treatment on NbTi superconducting wires with Cu5Ni alloy matrix - Mr. Xing Qin (Western Superconducting Technologies.,Ltd) Dr. Qiang Guo (Western Superconducting Technologies.,Ltd)   ()
13:15 ・ Evaluation of thermal strain induced on components of Nb3Sn strand during cool down - Mr. Tomone Suwa (National Institutes for Quantum and Radiological Science and Technology)   ()
Mon-Af-Po1.09 (until 15:00) ()
13:15 A Prototype of a 500 A class Bi-2223/AgAu Current Lead for a Conduction Cooled Superconducting Magnet - Mr. Takehisa Tsurudome (Sumitomo Heavy Industries, Ltd.)   ()
13:15 Current Transfer Length between Current Lead and Quasi-isotropic Strand Consisting of 2G HTS Tapes - Ms. Meng Wang (North China Electric Power University)   ()
13:15 Current transport characteristics of a superconducting joint between REBCO conductors made by a novel method - Yoshinori Yanagisawa (RIKEN)   ()
13:15 Design and Performance Results of Optimal Vapor-Cooled MgB2 Current Leads for a 1.5 T MRI Magnet - Mr. Jiman Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)   ()
13:15 Design and Test of Joints for HIAF Superconducting Dipole Magnet Prototype - Dongsheng Ni (Institute of Modern Physics Chinese Academy of Sciences)   ()
13:15 Design of the internal embedded joints for the EU DEMO TF coils - Aldo Di Zenobio (ENEA)   ()
13:15 Design, manufacture and test of 20 kA binary current leads for the HFML 45 T hybrid magnet - Andries den Ouden (Radboud University, Nijmegen, The Netherlands)   ()
13:15 Design, Testing and Commissioning of 25.7 kA HTS Current Leads - Guido Consogno (WEKA AG)   ()
13:15 Development of 52 kA HTS Current Leads for the ITER CS Magnet Test Application - Dr. Kaizhong Ding (Institute of Plasma Physics, Chinese Academy of Sciences)   ()
13:15 Development of Vapor-cooled Current Leads for LTS magnet in the EMPS - Myung Su KIM (Korea Basic Science Institute)   ()
13:15 Electrical joints of pure aluminum stabilised sc conductors - Sebi Curreli (Universita e INFN Genova (IT))   ()
13:15 Field-assisted Joining of (RE)Ba2Cu3O7-x Coated Conductors - Carolyn Grimley (North Carolina State University)   ()
13:15 Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results - Francois-Paul Juster (CEA)   ()
13:15 Lead-free persistent mode joints between NbTi wires - Timothy Davies (Department of Materials, University of Oxford)   ()
13:15 Manufacturing and Qualification Test of ITER Busbar Joint - Hyungjun Kim (ITER Organization)   ()
13:15 MgB2 superconductive short winding joints: mathematical prevision of current behaviours and experimental validations - Giovanni Valesi (ASG superconductors SpA)   ()
13:15 Optimization of 2G HTS Current Leads Working at External Magnetic Field - Vasily Zubko (Russian Scientific R&D Cable Institute)   ()
13:15 Overview of JT-60SA HTS current lead manufacture and testing - Reinhard Heller (Karlsruhe Institute of Technology)   ()
13:15 Performance of a HTS Persistent Current System for REBCO pancake coil - Dr. Kohki Takahashi (IMR, Tohoku University)   ()
13:15 Pre-commercial Joints of Coated Conductor with Lamination Structure Developed at SJTU and SSTC - Dr. Wei Wu (Shanghai Jiao Tong University)   ()
13:15 Reliability Study on Using a Single Equivalent Connection Layer in Finite Element Models for Coated Conductors’ Joint - Mr. Yunhao Pan (Shanghai Jiao Tong University)   ()
13:15 Resistance of splices in the LHC Main Superconducting Magnet Circuits at 1.9 K - Mr. Zinour Charifoulline (CERN)   ()
13:15 Simulation Analysis of Typical Defects on superconductor cable - Mr. chunhua fang   ()
13:15 Superconducting joints made using internal Mg diffusion (IMD)-processed MgB2 wires - Akiyoshi MATSUMOTO (NIMS)   ()
Mon-Af-Po1.10 (until 15:00) ()
13:15 A Numerical Method for Simulating the Quench Behavior of Superconductors - Wei Pi (North China Electric Power University)   ()
13:15 A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions - Mr. Yoon Hyuck Choi (Department of Materials Science and Engineering, Korea University)   ()
13:15 Analysis of the effects of the insulation on the quench transverse propagation in Nb3Sn Rutherford coils - Fabrizio Bellina (Udine University)   ()
13:15 Comparison of Measured and Simulated Quench Behaviors of Superconducting Magnets for Jefferson Lab’s 11 GeV Super High Momentum Spectrometer - Dr. Eric Sun (Jefferson Lab)   ()
13:15 Development of Quench Antennas for Quench Detection in Nb3Sn Magnets - Gerard Willering (CERN)   ()
13:15 Experimental and numerical analysis of quench characteristics on a HTS coil by fault disturbance in HTS generator - Dr. Zhen Huang (Shanghai Jiao Tong University)   ()
13:15 Experimental Study of Quench Performance for Superconducting Coil with YBCO Coated Conductors - Mrs. Panpan Chen (China electric power research institute)   ()
13:15 Experiments and Numerical Model of Quench Process Generated by Magnetic Disturbance in 2G HTS Tapes - Anfeng Zhao (Shanghai Jiao Tong University)   ()
13:15 Fast Calculation of Quenching Performance of Superconducting Materials Based on a Multi-dimensions Look-up Table - Mr. Jie Sheng (University of Bath)   ()
13:15 Influence of local critical current degradation on quench characteristics of a ReBCO coil - Ms. Momoe IDE (Tohoku University)   ()
13:15 Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique - Mr. Young-Gyun Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)   ()
13:15 Quench analysis and protection design of SECRAL II superconducting magnet - Prof. Lizhen Ma (Institute of modern physics,CAS)   ()
13:15 Quench and Recovery Characteristics of Racetrack Coil for Large-capacity Wind Generator - Anfeng Zhao (Shanghai Jiao Tong University)   ()
13:15 Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment - Kwangmin Kim (National High Magnetic Field Laboratory)   ()
13:15 Quench propagation measurements on 2 km MgB2 coil up to 4 T. - Dr. Christophe Berriaud (CEA Saclay / Irfu)   ()
13:15 Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches - Hugo Bajas (CERN) Jose Vicente Lorenzo Gomez (Centro de Investigaciones Energéti cas Medioambientales y Tecno)   ()
13:15 Remarkable difference in thermal runaway behavior between a Ni-alloy reinforced Bi-2223 coil and a REBCO coil - Yu Suetomi (RIKEN)   ()
13:15 The latest observations from results of comprehensive computer simulation of the NHMFL all-superconducting 32T magnet quench tests - Dr. Andrey Gavrilin (NHMFL - FSU)   ()
13:15 Unbalanced Torque in High Magnetic Field No-Insulation REBCO Pancake Magnet after Quench - Ryosuke Miyao (Hokkaido University)   ()
Mon-Af-Po1.11 (until 15:00) ()
13:15 Cool-down of LTS magnets by a closed loop helium gas flow - Mr. Francesco Dioguardi (DH Industries BV)   ()
13:15 Cooling experiment analysis of a prototype thermal siphon system for single crystal ingot growth magnet - Woo Seung Lee (JH Engineering Corp.)   ()
13:15 Cryogen Recondensed Cooling System for Electron Beam Ion Source Employing 7 T Superconducting Solenoid Magnet - Mr. Su-Hun Kim (Kyungpook National University)   ()
13:15 Cryogenic Oscillating Heat Pipe for Conduction-cooled Superconducting Magnets - Qiuliang Wang   ()
13:15 Cryogenic test facility for the HIAF Superconducting Dipole Magnet Prototype - Dongsheng Ni (Institute of Modern Physics Chinese Academy of Sciences)   ()
13:15 Design and construction of the magnet-cryostat for the SuperKEKB Interaction Region - Norihito Ohuchi (KEK)   ()
13:15 Design and performance analysis of a cryostat for pulsed high magnetic field using a small scale helium liquefaction system - Dr. Mengyu Liu   ()
13:15 Design and Research of Cryostat for 3W1 SC Wiggler Magnet - Mr. Miaofu Xu   ()
13:15 Development of a 1.5 Tesla whole-body MRI Magnet with a very low helium inventory - Dr. Adam Johnstone (Siemens Healthcare)   ()
13:15 Liquid nitrogen level detection method for the safe operation of onboard cryostats of high-temperature superconducting maglev vehicles under vibration condition - Mr. Yong Zhang (Southwest Jiaotong University)   ()
13:15 Operation of the helium cryogenic system for the hybrid superconducting outsert at CHMFL - Junjie LI (CHMFL)   ()
13:15 Speed up the cooling process of superconducting magnets by applying a large cooling capacity Stirling cryocooler - Mr. Xin Qiao (Institute of Refrigeration and Cryogenics of Zhejiang University, Key Laboratory of Refrigeration and Cryogenic Technology of Zhejiang Province)   ()
13:15 Thermal characteristics of a prototype HTS quadrupole magnet for In-flight fragment separator of RISP - Mr. Heecheol Park (Changwon National University)   ()
Mon-Af-Po1.12 (until 15:00) ()
13:15 A new three-level repetitive pulse magnetic field power supply system - Dr. Yun Xu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 A novel digital magnet power supply approach - Enrico Braidotti (CAEN ELS s.r.l.)   ()
13:15 Cascaded Multilevel Converter with Floating Capacitors for a small tokamak, PHiX - Masamichi Murayama (Tokyo Institute of Technology)   ()
13:15 Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field - Zhangfei Zhao (Wuhan National High Magnetic Field Center Huazhong University of Science and Technology)   ()
13:15 Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University - Chengxi Jiang (Huazhong University of Science and Technology)   ()
13:15 Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field - Yongheng Huang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field - Dr. Yongheng Huang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 Development of a new high stability of power supply in the superconducting system - yongseng wong (NSRRC)   ()
13:15 Development of Real-time Monitoring System of the 100 MVA/100 MJ Flywheel Pulse Generator System - Dr. Yun Xu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 Driving and protecting superconducting hybrid magnets - Mr. Lou van Lieshout   ()
13:15 EMC tests at the location of the DCCT and ADC calibration laboratory at FAIR project - Mr. Cornelius Post (Lambda Engineering)   ()
13:15 Indirectly cooled superconducting power supply for the CMD-3 thin solenoid - Mr. Sergey Karpov (Budker Institute of Nuclear Physics)   ()
13:15 Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field - Zhangfei Zhao (Wuhan National High Magnetic Field Center Huazhong University of Science and Technology)   ()
13:15 Ramping Injector Power Supply for Dipole Magnets - Dimitrios Papathanasiou (Ampulz)   ()
13:15 Research of a new DC breaker based on the electromagnetic forming technology for Battery power supply of long pulsed magnet - Prof. Tonghai Ding (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field - Jun Zhou (Wuhan National High Magnetic Field Center,Huazhong University of Science and Technology)   ()
13:15 Research on operation strategy of the pulse generator power system energizing the out coil of the 100 Tesla magnet - Dr. Yun Xu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 The implement of control and date acquisition system for the 100 T pulsed high magnetic field facility at WHMFC - Jiangtao Shi (Huazhong University of Science and Technology)   ()
13:15 Upgrade of the Grenoble High Magnetic Field Facility - Mr. Romain Barbier (LNCMI-EMFL-CNRS)   ()
Mon-Af-Or4 (until 16:30) ()
15:00 [Invited] JT-60SA Magnet System Status - Sam Davis (Fusion for Energy)   ()
15:30 Vacuum Pressure Impregnation for Central Solenoid of JT-60SA - Dr. Haruyuki Murakami (National Institutes for Quantum and Radiological Science and Technology)   ()
15:45 Completion of ENEA’s procurement for 9 TF coils of JT-60SA tokamak - Dr. Gian Mario Polli (ENEA FSN)   ()
16:00 Progress of the JT-60 SA Toroidal Field coils tests in the Cold Test Facility - Dr. Walid Abdel-Maksoud (CEA)   ()
16:15 Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility - Dr. François BONNE (CEA) Sylvie NICOLLET (CEA)   ()
Mon-Af-Or5 (until 16:30) ()
15:00 Design and technical development of a high-resolution 1.3 GHz NMR magnet - Yoshinori Yanagisawa (RIKEN)   ()
15:15 Fabrication and Testing of Bi-2223 Insert Coils for High Field NMR Magnets - William Marshall (National High Magnetic Field Laboratory)   ()
15:30 Development of liquid nitrogen cooled RE-Ba-Cu-O magnet for NMR use - Gen Nishijima (National Institute for Materials Science)   ()
15:45 Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction - Dr. SangGap Lee (Korea Basic Science Institute)   ()
16:00 Control design of a magnetic catheter navigation system for cardiac arrhythmias - Dr. Jianhua Liu (Intitute of Electrical Engineering, Chinese Academy of Sciences)   ()
16:15 Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments - Kei Koyanagi (TOSHIBA Corporation)   ()
Mon-Af-Or6 (until 16:30) ()
15:00 [Invited] High Field Twin-aperture Dipole Magnet R&D for SPPC Pre-study - Qingjin XU (IHEP)   ()
15:30 Design of a Nb3Sn 16 T block dipole for the Future Circular Collider - Clement Lorin (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))   ()
15:45 Magnetic and mechanical design of a 16 T common coil dipole for FCC - Fernando Toral (Centro de Investigaciones Energéti cas Medioambientales y Tecno)   ()
16:00 Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider - Vittorio Marinozzi (University of Milan / INFN)   ()
16:15 Development and test of REBCO canted cosθ dipole coils with CORC® wires - Xiaorong Wang (Lawrence Berkeley National Laboratory)   ()
16:30 --- Break ---
Mon-Af-Or7 (until 18:30) ()
17:00 Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN - Frederic Savary (CERN)   ()
17:15 Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN - Gerard Willering (CERN)   ()
17:30 Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4 - Dr. Diego Arbelaez (LBNL)   ()
17:45 Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator - Alexander Zlobin (Fermilab)   ()
18:00 Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models - Thomas Strauss (Fermilab) Gueorgui Velev (FNAL)   ()
18:15 Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC - Bernhard Auchmann (CERN)   ()
Mon-Af-Or8 (until 18:30) ()
17:00 Experimental Evaluation and Numerical Simulation of a HTS Linear Synchronous Motor for High Speed Railway - Prof. Guangtong Ma (Southwest Jiaotong University)   ()
17:15 Design and Optimize an external rotor Ironless BLDCM used in a Flywheel Energy Storage System - Mr. Kai Liu (Southeast University)   ()
17:30 Study on Counter-rotating Dual Rotors Radial Permanent Magnet Motor for underwater vehicle Propulsion - Prof. Guangwei Liu (Shenyang University of Technology)   ()
17:45 Power Loss Research and Demagnetization Analysis for High Speed Permanent Magnet Machine - Mr. Yue Zhang (Queens University Belfast)   ()
18:00 Superconducting synchronous motor With HTS stacked tape armature - Dr. Mehdi Baghdadi (University of Greenwich)   ()
18:15 Design for high speed permanent magnet electrical machine with power loss research - Dr. Shi Jin (Shenyang University of technology)   ()
Mon-Af-Or9 (until 18:30) ()
17:00 Overview of Recent Progress in No-Insulation REBCO Magnet Research - Seungyong Hahn (Seoul National University / National High Magnetic Field Lab.)   ()
17:15 Mechanisms to enhance stability, post-quench recovery and availability in non-insulated REBCO magnets - Dr. Wan Kan Chan (North Carolina State University, Raleigh, USA)   ()
17:30 Self-heating effect in HTS coils - Anne Bergen (University of Twente)   ()
17:45 A portable superconducting magnet system with trapped field > 3 T - Mr. Zhou Difan (University of Cambridge)   ()
18:00 Analysis of Minimum Quench Energy of ITER NbTi and Nb3Sn CICCs - Tommaso Bagni (University of Twente)   ()
18:15 Design of a Magnet Bore Field Mapper Consisting of a Cylindrically Fixed Array of Inexpensive Hall Elements to Probe Low-Order Spherical Harmonics in Real Time - Dr. David K. Hilton (NHMFL-FSU)   ()
18:30 --- Free evening ---
12:15 --- Lunch ---
Tue-Af-Po2.01 (until 15:00) ()
13:15 CONCEPTUAL MODEL OF THE SOLENOID FOR THE SPIN PROGRAM AT NICA AND NUMERICAL MODELING OF THE MAGNETIC FIELD GENERATED - Dr. Ion Dobrin (National Institute for Research and Development in Electrical Engineering ICPE-CA)   ()
13:15 Construction and cold test of the superferric octupole and decapole for the LHC Luminosity upgrade - Dr. Marco Statera (INFN Milano - LASA)   ()
13:15 Design and quench study of a Low-Tc superferric dipole magnet - Aziz Zaghloul   ()
13:15 Design Study of a Novel, LHC High-Lumi CCT Orbit Corrector. - Glyn Kirby (CERN)   ()
13:15 Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC - Helene Felice (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))   ()
13:15 Development of Prototype LTS Quadrupole Magnet Triplet for IF Separator of RISP - Do Gyun Kim (Institute for Basic Science)   ()
13:15 Development Status of High-Tc Superconducting Quadrupole Magnet for the In-flight Fragment Separator of RISP - Hyun Chul Jo (Institute for Basic Science / Rare Isotope Science Project)   ()
13:15 Electromagnetic analysis of a superconducting bus-bar for SIS100 particle accelerator at FAIR - Mr. Lukasz Tomkow (Wrocław University of Technology)   ()
13:15 Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade - Mr. Shun Enomoto (KEK)   ()
13:15 Improvement of the Magnetic Design for the Superferric Dipoles for the Super-FRS of FAIR - Dr. Jorge enrique MUÑOZ GARCIA (CEA-DRF)   ()
13:15 Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider - Emelie Nilsson (CERN)   ()
13:15 Magnetic Design Update of Large Aperture Beam Separation Dipole for the HL-LHC Upgrade - Michinaka Sugano (KEK)   ()
13:15 Magnetic measurements of the NICA booster superconducting magnets - Vladimir Borisov (Joint Institute for Nuclear Research)   ()
13:15 Measurement facility and test results for FRIB superconducting magnets at IMP - Mr. Wenjie Yang (University of Chinese Academy of Sciences )   ()
13:15 New Geometry of Wide-Aperture Quadrupole Magnets for Plasma Experiments in the FAIR Project - Leonid Tkachenko (Institute for High Energy Physics)   ()
13:15 Preliminary design of the FAIR Super FRS superferric branched dipoles - Dr. Arnaud Madur (CEA Saclay)   ()
13:15 Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade - Kento Suzuki (High Energy Accelerator Research Organization)   ()
13:15 The current status of magnet for IF(In-flight Fragment) separator of RISP - Sukjin Choi (IBS)   ()
Tue-Af-Po2.02 (until 15:00) ()
13:15 Accurate 3D Field Mapping of an Iron Shielded Split Coil Spectrometer Magnet - Christina Wouters (ETH Zurich)   ()
13:15 Design and characterisation of tunable high gradient permanent magnets quadrupoles - Fabrice Marteau (Synchrotron SOLEIL)   ()
13:15 Design and measurent of a 2.4 tesla superbend magnet prototype at SSRF - Maofei Qian (Shanghai Institute of Applied Physics, CAS)   ()
13:15 Design Study of Main Magnets for the J-PARC RCS Energy Upgrade - Dr. Norio Tani (Japan Atomic Energy Agency)   ()
13:15 Eight-Piece Quadrupole Magnet Allows Precise Pole Tip Positioning - Mr. Mark Jaski (Argonne National Laboratory)   ()
13:15 Fast dipole magnet development - Ivan Morozov (BINP)   ()
13:15 Field Measurement of a Pulse Bending Magnet for a Beam-Switching System in the J-PARC - Dr. Masahiro Yoshimoto (JAEA/J-PARC)   ()
13:15 Injection Kicker for HESR at FAIR using Semi-Conductor Switches - Mr. olivier cosson   ()
13:15 Lambertson Septum Magnet Design for the LCLS-II Beam Spreader at SLAC - John Amann (SLAC National Accelerator Laboratory)   ()
13:15 Magnetic Septa for the SIS100 Accelerator at FAIR - Peter Rottländer (GSI Darmstadt)   ()
13:15 Optimization of the Radiation Resistant Quadrupole Magnets for the SIS-100 Accelerator of the FAIR Project - Carsten Muehle (GSI Helmholtzzentrum fuer Schwerionenforschung)   ()
13:15 Quadrupole design for the 2 GeV upgrade of the CERN PS-Booster - Jonathan David Speed (CERN)   ()
13:15 Simulations, measurements and sorting of THOMX ring bending magnets. - Fabrice Marteau (Synchrotron SOLEIL) Cynthia Vallerand (Linear Accelerator Laboratory)   ()
13:15 Study of Eddy Current Effect in a High Field Dipole - Dr. Miao Zhang   ()
13:15 SwissFEL Beam Dump Dipole Spectrometer Simplistic Design Backed by Accurate Magnetic Field Measurements - Vjeran Vrankovic (Paul Scherrer Institute)   ()
Tue-Af-Po2.03 (until 15:00) ()
13:15 Current Center Line Measurement of ITER TF Coil - Dr. Norikiyo Koizumi (National Institutes for Quantum and Radiological Science and Technology)   ()
13:15 Evaluation of Voltage between Conductors for Resonance Phenomenon and Transient Response in JT-60SA Central Solenoid - Mr. Sho Fujiyama (Sophia University)   ()
13:15 Experimental Results of Secular Changes of the Performance of the KSTAR Nb3Sn Coils - Hirofumi Yonekawa (National Fusion Research Institute (NFRI))   ()
13:15 Measurements of the Effective Thermal Conductivity of the ITER TF Coil Case Cooling System - Xabier Sarasola (EPFL)   ()
13:15 Mechanical Behavior of the ITER TF Insert - Dr. Nicolai Martovetsky (LLNL/ORNL)   ()
13:15 Prediction and analysis of quench propagation test results in the ITER TF Insert Coil using the 4C code - Roberto Zanino (Politecnico di Torino)   ()
13:15 Quench simulation of a DEMO TF coil using a quasi-3D coupling tool - Mr. Quentin Le Coz (CEA/IRFM)   ()
13:15 R&D of the Helium Inlet for the CFETR Central Solenoid Model Coil - Aihua Xu (institute of plasma physics Chinese academy of sciences)   ()
13:15 Study of the Hotspot Temperature during Quench in the Non-Planar Coils of W7-X - Kamil Sedlak (Paul Scherrer Institut, Switzerland)   ()
13:15 Superconducting Feeder System For ITER Central Solenoid Module Final Test Facility - Dr. Zbigniew Piec (General Atomics)   ()
13:15 The Charging and Discharging characteristics of a YBCO Metal-insulation coil - Mr. Jun Ma   ()
13:15 The PF1 coil tail sample test - Dmitriy Stepanov (NIIEFA, Russia, Saint-Petersburg)   ()
Tue-Af-Po2.04 (until 15:00) ()
13:15 A 9 T Cryocooler Cooled High current density NbTi superconducting magnet - Mr. Bai Lifeng (Northwest Institute for Nonferrous Metal Research)   ()
13:15 A Desktop Size Power Supply based Marx Generator for Pulsed Magnetic Field - Prof. Houxiu Xiao (Huazhong University of Science and Technology)   ()
13:15 A Modularon-PCB-boardhigh voltage capacitor bank charger - Prof. Houxiu Xiao (Huazhong University of Science and Technology)   ()
13:15 A novel clamping method for resistive magnets - Frans Wijnen (Radboud University Nijmegen)   ()
13:15 Construction and test of the NHMFL 32 T superconducting magnet - Dr. H.W. Weijers (NHMFL/FSU)   ()
13:15 Design and Implementation of Magnetic-Resonance-Based Wireless Power Transfer System for Sensors of Pulsed Magnetic Field System - Prof. Houxiu Xiao (Huazhong University of Science & Technology)   ()
13:15 Development and Performance of 65 T Fast-cooling User Magnet with Long Service Life - Dr. Tao Peng (Wuhan National High Magnetic Field Center)   ()
13:15 Development of the Decoupling Transformer for the 100 T Magnetic Field System at the Wuhan National High Magnetic Field Center - Shuang Wang (Huazhong University of Science and Technology)   ()
13:15 Electrical and Mechanical Interactions between Component Coils of Multi-Plex Pulsed Magnet Systems - Dr. Doan Nguyen (Los Alamos National Laboratory)   ()
13:15 Electromagnetic Design and Multi-physical Modeling of a 100-T Triple-coil Pulsed Magnet System - Fan Jiang   ()
13:15 Energy and material efficient non-circular bore Bitter magnets - Andrey Gavrilin (Florida State University, Florida, USA)   ()
13:15 Fast cooling high field pulsed magnet with distributed mini cooling gaps - Dr. Yiliang Lv (Huazhong University of Science and Technology)   ()
13:15 Finite Element Model for the Elasto-plastic Stress Analysis of Pulsed High Field Magnets - Houxiu Xiao   ()
13:15 High Speed Multi-Channel Acquisition and Mapping System based on FPGA for Pulsed Magnetic Field - Prof. Houxiu Xiao (Huazhong University of Science and Technology)   ()
13:15 Optimal Design of Magnet for Repetitive Flat-top Pulsed High Magnetic Field - Dr. Yun Xu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)   ()
13:15 Research and Realization of High Stability Flat-top Pulsed Magnetic Field by a Compensation Power Supply - Prof. Houxiu Xiao (Huazhong University of Science and Technology)   ()
13:15 Static and transient magnetic design of a Septum magnet for ThomX accelerator - Mr. olivier cosson Patrice Jehanno   ()
13:15 The conceptual design and analysis of the background magnet for a conductor test facility - linyu sun (Southwestern Institute of Physics)   ()
13:15 The hybrid magnet at CHMFL - Prof. Guangli Kuang   ()
Tue-Af-Po2.05 (until 15:00) ()
13:15 A long solenoid HTS magnet with the Joint-less winding technique - Mr. Seyeon Lee (Korea polytechnic university)   ()
13:15 A Permanent Magnet of 60MHz High Resolution NMR for On-line Industrial Application - Dr. Lankai Li (Institute of Electrical Engineering, Chinese Academy of Sciences)   ()
13:15 A Study on the Effect of Crossover Turn of Double Pancake Winding on Magnetic Field Homogeneity of HTS NMR Magnet - Mr. Geonwoo Baek (Electrical and Electronic Engineering, Yonsei University)   ()
13:15 Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet. - Mr. Junseong Kim (Electrical and Electronic Engineering, Yonsei University)   ()
13:15 Construction and Test of a 400 MHz 100 mm Conduction-Cooled NMR Magnet wound with Metal-Clad GdBCO Tapes - Kanghwan Shin (SuNAM Co., Ltd.)   ()
13:15 Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet - Dongkeun Park (Massachusetts Institute of Technology, Francis Bitter Magnet Laboratory, Plasma Science and Fusion Center)   ()
13:15 Design and Implementation of Ferromagnetic Shims for a 3-T 100 mm All-REBCO No-Insulation Magnet - Min Cheol Ahn (Kunsan National University)   ()
13:15 Development of a REBCO innermost coil for a persistent 400 MHz (9.39 T) LTS/REBCO NMR magnet - Takeshi Ueno (Sophia University)   ()
13:15 Development of HTS bulk NMR relaxometry with ring-shaped iron rings - Prof. SeokBeom Kim (Okayama University)   ()
13:15 HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype - Dongkeun Park (Massachusetts Institute of Technology, Francis Bitter Magnet Laboratory, Plasma Science and Fusion Center)   ()
13:15 Investigation of epoxy impregnated Nb3Sn superconducting coil for high field applications - Dr. Junsheng Cheng (Institute of Electrical Engineering, Chinese Academy of Sciences)   ()
13:15 NMR Solenoid for Multi-Sample Spectroscopy - Peter McIntyre (Texas A&M University)   ()
13:15 THE SCANNING MAGNETS FOR PROTON THERAPY AT SAPT - Mr. Jia Bolei (Shanghai Institute of Applied Physics)   ()
Tue-Af-Po2.06 (until 15:00) ()
13:15 3D Electromagnetic Analysis of Tubular Permanent Magnet Linear Launcher - Prof. Hao Chen (China University of Mining & Technology)   ()
13:15 3D modeling of HTS bulk array used on the rotor by finite element software - Dr. Zhen Huang (Shanghai Jiao Tong University)   ()
13:15 A New Dual Stator Hybrid Excitation Flux Switching Machine with Iron Flux Bridge - Dr. Yi Du (Jiangsu University)   ()
13:15 A New Magnetic Field Modulation Type of Brushless Double-Fed Machine - Dr. Xinbo Liu (Jiangsu University)   ()
13:15 A New Partitioned Stator Hybrid Excitation Flux Switching Motor with Ferrite Permanent Magnet - Dr. Yi Du (Jiangsu University)   ()
13:15 A New Partitioned Stator Hybrid Excitation Machine with Separated Field Sources and Armature Windings - Dr. Yi Du (Jiangsu University)   ()
13:15 A Novel Five-phase Double-Stator Tubular Fault-tolerant Flux-Modulation Permanent Magnet Motor - Prof. Huawei Zhou (Jiangsu University)   ()
13:15 A Novel Flux-Focusing Doubly Salient Memory Machine - Mr. Jiaming Jiang   ()
13:15 A Novel Linear Permanent Magnet Vernier Machine with HTS Coils and Halbach Permanent Magnet Array - Dr. Chaojie Shi (School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)   ()
13:15 A Study for Flux-Variable Memory Motor Depending on the Position of the Permanent Magnets - SU YONG KIM (Korea/KETI)   ()
13:15 A study on Double Layer V-Shape Magnet Type IPMSM design in view of demagnetization - Mr. Ji-Han Lee (Sungkyunkwan Univeristy)   ()
13:15 A Study on the Design of IPMSM for Reliability of Demagnetization Characteristics-based Rotor - Mr. Geochul Jeong   ()
13:15 A Study on the Selection of the Optimal Number of Poles for Maximizing the Magnetic Flux of Spoke type Permanent Magnet Motor - Won-Ho Kim (Gachon University) SUNG GU LEE (Busan University of Foreign Studies)   ()
13:15 AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor - Kenichi Ikeda (Kyoto University)   ()
13:15 Analysis and application of discrete Halbach magnet array with unequal arc lengths and unequally-changed magnetization directions - Mr. Hailin Huang (Huazhong University of Science and Technology)   ()
13:15 Analysis on Design Sensitivity of Permanent Magnet Motor using Lumped Magnetic Circuit Method - Jae-Hak Lee (SungKyunKwan University)   ()
13:15 Analytical Calculation and Experimental Verification for Electromagnetic Vibration Sources and Optimal Design in Permanent Magnet Synchronous Machines - Mr. Kyung-Hun Shin (Chungnam National University)   ()
13:15 Analytical Calculation for Rotor Eddy-Current Losses in Permanent Magnet machine - Mr. Kyung-Hun Shin (Chungnam National University)   ()
13:15 Analytical design of five-phase high speed axial flux permanent magnet machine for flywheel energy storage system - Prof. Jianning Dong (Delft University of Technology)   ()
13:15 Analytical Methods for Reducing Cogging Torque in Single-Phase BLDC Motors with a Tapered Air-Gap and Asymmetric Notches - Mr. Young-Un Park (Sunchon National University)   ()
13:15 Characteristics Analysis of an HTS Homopolar Motor-Generator Set for DC to DC transformation - Kyeongdal Choi (Korea Polytechnic University)   ()
13:15 Cogging Force Reduction of Double-Sided Flux-Switching Permanent Magnet Linear Machine - Qiang Liu (Jiangsu Maritime Institute)   ()
13:15 Core Loss Calculation of Permanent Magnet Machines Using Analytical Method - Mr. Kyung-Hun Shin (Chungnam National University)   ()
13:15 Design and Analysis of Magnetic Geared Permanent Magnet Machine Considering Loss Reduction - Mr. Kyung-Hun Shin (Chungnam National University)   ()
13:15 Design and Analysis of Outer-Rotor Permanent Magnet Synchronous Machine With Amorphous Stator Core - Mr. yong kong (School of Electrical Engineering, Southeast University)   ()
13:15 Design of a Novel Double-Stator Flux Reversal Machine with Hybrid HTS and PM Excitations - Dawei Li (Huazhong University of Science and Technology)   ()
13:15 Design of Single-Phase Rotary Actuator for Gimbal System Considering Magnetic Saturation - Sooyoung Cho (Hanyang University)   ()
13:15 Design strategy of interior permanent magnet synchronous motor for maintaining torque performance at flux weakening region - Mr. SangHyeok Seo (SungKyunKwan University)   ()
13:15 Estimation of Flux Regulation Capability of a Hybrid PM Axial-Field Flux Switching Memory Machine Considering the Effect of Temperature - Nian Li (Southeast university)   ()
13:15 Improved Inner Stator-Magnet Moving-Iron Transversal-Flux Linear Oscillatory Machine with Magnets in Inner Stator Yoke - Dr. Wei Xu (School of Electrical and Electronics Engineering, Huazhong University of Science and Technology)   ()
13:15 Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor - Myung-Ki Seo (Sungkyunkwan University)   ()
13:15 Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor - Mr. Siyu Guo (Kyoto University)   ()
13:15 Magnetic Field Analysis of a Novel Configuration of Reluctance Machine with Axial Magnetic Flux and Radial Assisted Excitation - Mr. Jiachuan Lou (Shenyang University of Technology)   ()
13:15 Minimization design of torque ripple for bearingless synchronous reluctance motor - Xiaoyan Diao (Jiangsu University)   ()
13:15 Novel 4/4 Stator/Rotor Single-Phase Asymmetric Stator-Pole Doubly Salient Machine with Permanent Magnets on Stator Teeth - Dr. Wei Xu (Huazhong University of Science and Technology)   ()
13:15 Novel Heteropolar Hybrid Radial Magnetic Bearing with Double-Layer Stator for Flywheel Energy Storage System - Dr. Wei Xu (Huazhong University of Science and Technology)   ()
13:15 Optimal design of a surface-mounted PM motor with low torque ripple for robot joints - Prof. Jianning Dong (Delft University of Technology)   ()
13:15 Optimization Design and Characteristics Investigation of Fractional Slot Concentrated Winding Pole-Phase Modulation Memory Machine - Jiaming Jiang   ()
13:15 Optimization Design of Bearingless Synchronous Reluctance Motor - Ding Haifei (Jiangsu University)   ()
13:15 Output characteristic improvement of brushed reluctance motor through asymmetric slot structure - Hyun-Woo Jun (Hanyang University)   ()
13:15 Performance Evaluation of a Novel Axial Flux Claw Pole Machine with Soft Magnetic Composite Cores - Dr. chengcheng liu (Hebei university of technology)   ()
13:15 Research on a Coreless Superconducting Linear Machine for Electromagnetic Catapult - Lei Huang (Southeast University)   ()
13:15 Research on control system of a novel coil assisted reluctance motor - Prof. Aimin Liu (Shenyang University of Technology)   ()
13:15 Simulation of Electromagnetic and Motion Characteristics of a Bulk Superconductor in a Coil Gun - Prof. Wenjiang Yang (Beihang University)   ()
13:15 Torque Actuator Control considering Nonlinearity of Magnetic Saturation - Ms. Kyoung-Jin Joo (Hanyang Univ.)   ()
13:15 Torque Ripple Minimization in a PM-assisted Synchronous Reluctance Motor with Different Flux Barrier Rotor - Aamir Nazir (Jiangsu University)   ()
13:15 Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor - Mr. Tomoharu Karashima (Kyoto University)   ()
13:15 Vibration Comparison of Two Fault-Tolerant Flux-Switching Permanent-Magnet Machines - Prof. Guohai Liu (School of Electrical and Information Engineering, Jiangsu University)   ()
Tue-Af-Po2.07 (until 15:00) ()
13:15 Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter - Seonho Hwang (Chosun university)   ()
13:15 Analysis of recovery characteristics of the SFCL applied to DC power system - Prof. BYUNG IK JUNG (Dongkang University)   ()
13:15 Analysis on AC Loss of DC HTS SFCL Coils due to AC Ripple Current - Zhe Jiang (North China Electric Power Univercity)   ()
13:15 Application of the superconductive fault current limiter in limiting the transformer inrush current - chao li (University of Cambridge)   ()
13:15 Basic study of superconducting coils in rectifier transformers for railway electrification system - Yusuke Fukumoto (Railway Technical Research Institute)   ()
13:15 Characteristic analysis of SFCL DC interrupting system in Windfarm - Jun Beom Kim (Chosun University)   ()
13:15 Characteristics of superconducting coil-type DC Fault Current Limiter to increase stability in DC power system - HyeWon CHOI (CHOSUN University)   ()
13:15 Comparative Study on Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiters (SFCLs) with Common Connection Point between Two Secondary Windings - Prof. Shin-Won Lee (Jungwon University)   ()
13:15 Conceptual Design and Performance Evaluation of a 35 kV / 500 A Flux-Coupling-Type SFCL for Protection of a DFIG-Based Wind Farm - Dr. Lei Chen (Wuhan University)   ()
13:15 Current Limiting and Recovery Characteristics of A Trigger Type SFCL using Double Quench - Prof. Sung-Hun Lim (Soongsil University)   ()
13:15 Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiter (SFCL) due to Winding Direction of Additional Secondary Winding - Prof. Tae-Hee Han (Jungwon University)   ()
13:15 Design and fabrication of HTS DC bias coil for 500kV saturated iron core fault current limiter - Dr. Tao Ma (Beijing Jiaotong University)   ()
13:15 Design and Test of 10 kV/400 A Flux-coupling Type Superconducting Fault Current Limiting Module - Qingquan Qiu (Institute of Electrical Engineering, Chinese Academy of Science)   ()
13:15 Design and verification test of a flux-coupling type superconducting fault current limiter - Dr. Li Ren (Huazhong University of Science and Technology)   ()
13:15 Development of round flexible HTS CORC® wires for fault current limiting applications - Jeremy Weiss (Advanced Conductor Technologies)   ()
13:15 Effectiveness of Superconducting Fault Current Limiting Transformers in Power Systems - Mrs. Mariam Elshiekh (University of Bath, UK)   ()
13:15 Effects on the Parasitic Capacitance of HTS Coils Considering Impulse Voltage for Dielectric Design - Seokho Nam (Yonsei University)   ()
13:15 Electromagnetic analysis and Optimized Design of a noval hybrid type DC Superconducting Fault Current Limiter - Siyuan Liang (State Key Laboratory of Advanced Eleomagnetic Engineering and Technology)   ()
13:15 Electromagnetic Field Analysis of a Run - type High Temperature Superconducting Current Limiter Coil - Mr. Chen Huang (University of Science and Technology of China)   ()
13:15 Experimental tests on a superconducting hybrid DC circuit breaker - Xiaoze Pei (University of Bath)   ()
13:15 Magnetic field and characteristic analysis of the superconducting fault current limiter for DC applications - Prof. dong xia (Institute of Electrical Engineering, Chinese Academy of Sciences)   ()
13:15 Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL - Sinian Yan (Huazhong University of Science and Technology, China)   ()
13:15 Performance simulation of a bias-flux superconducting fault current limiter (SFCL) based on MATLAB/SIMULINK - Mr. Jiang Shengqian   ()
13:15 Research on the Cooling Enhancement of HTS Coil using Metal Insulation Tape - Seokho Nam (Yonsei University)   ()
13:15 Study on Operation Charactersitcis with Flux-Lock Type SFCL considering Interruption of Circuit Breaker in Power Distribution System - Jin-Seok Kim (Seoil Univ.)   ()
13:15 Study on quench and recovery characteristics of non-inductive YBCO coil under DC overcurrent - Mr. Bangzhu Wang   ()
13:15 Test of a Prototype Inductive Superconducting Fault Current Limiter Using No-insulation Coil - Derong Qiu (Shanghai Jiao Tong University)   ()
13:15 The optimal design of superconducting coil withstanding short-time large current impact in VSC-HVDC - Zhifeng Zhang (Institute of Electrical Engineering Chinese Academy of Sciences)   ()
13:15 Transient Current Limiting Characteristics of Autotransformer Type SFCL using Additional Winding - Prof. Lim Sung-Hun (Soongsil University)   ()
13:15 Winding Technology And Experimental Study On Superconductive Fault Current Limiter - Mr. chen liang   ()
Tue-Af-Po2.08 (until 15:00) ()
13:15 A 3D quench model for high temperature superconductor CORC cable based T-A formulation - Yawei Wang (University of Bath)   ()
13:15 An Experimental Stability Diagram for ReBCO Roebel Cables at 4.2 K and Applied Fields up to 12 T - Chris Kovacs (The Ohio State University)   ()
13:15 Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament - Kohei Higashikawa (Kyushu University)   ()
13:15 Current sharing properties of REBCO superconducting parallel conductors wound into a coil - Shintaro Sagawa (Kyushu University)   ()
13:15 Current Sharing Temperature and Quench Characteristics of ReBCO Quasi-isotropic Superconducting Strands in Different Sheaths - Dr. Wei Pi (North China Electric Power University)   ()
13:15 Development of Analyzing Capability of React and Wind Process based on Strand Trace and Inter-Strand Resistance Measurement System for Cable-In-Conduit Conductor - TSUYOSHI YAGAI (Sophia University)   ()
13:15 Development of small diameter HTS Cross Conductors for Fusion Magnet Application - Walter H. Fietz (Karlsruhe Institute of Technology, Institute for Technical Physics, Karlsruhe, Germany)   ()
13:15 Evaluation of Electrical Characteristics for a Twisted Soldered-Stacked-Square (3S) HTS Wire with 1 mm Width - Zhuyong Li   ()
13:15 Experimental Study on AC Loss of a Quasi-isotropic Strand Fabricated by 2G HTS CCs in AC Magnetic Fields - Mr. Yan Li   ()
13:15 Experimental study on the effect of twisting on critical currents of Nb3Sn cable-in-conduit conductors - Shinsaku Imagawa (National Institute for Fusion Science)   ()
13:15 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft - Zixuan Zhu   ()
13:15 Finite element analysis of strain distribution of REBCO coated conductors subjected to bending conditions experienced in high-field magnet applications - Federica Pierro (Tufts University)   ()
13:15 Lessons learnt by manufacturing 100 km of varied type of Cable-in-Conduit-Conductors - Simonetta Turtu' (ENEA)   ()
13:15 Manufacturing of CFETR CSMC Full-size Conductors - Dr. Jinggang Qin (Institute of Plasma Physics, CAS)   ()
13:15 Numerical Study on Electro-thermal Characteristics of Core Cable Consisted Of YBCO Coated Conductor - shanshan fu (China electric power research institute)   ()
13:15 Recent progress in development of high performance CICCs for CFETR magnet - Jinggang Qin   ()
13:15 Stacked tape HTS conductors for Fusion Magnets - Davide Uglietti   ()
Tue-Af-Po2.09 (until 15:00) ()
13:15 Analytical investigation in bending characteristic of pre-twisted HTS tapes - Dr. Wurui Ta (Key Laboratory of Mechanics on Environment and Disaster in Western China, The Ministry of Education of China, Lanzhou, Gansu 730000, P. R. China)   ()
13:15 Characterization of the Stress Distribution on Nb3Sn Rutherford Cables Under Transverse Compression - Felix Josef Wolf (TU Bergakademie Freiberg (DE))   ()
13:15 Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion - Mr. Seunghak Han (Electrical and Electronic Engineering, Yonsei University)   ()
13:15 E-WASP, a facility to test strain, temperature, magnetic field and current effects on superconducting samples - Luigi Muzzi (ENEA/ICAS)   ()
13:15 Experimental Study on the Mechanical Stress Effect on the Degradation of High Temperature Superconducting Coils - Mr. Toru Ueki (Meiji University)   ()
13:15 High definition 3D finite element analysis of low temperature Rutherford cable - Mr. François Nunio (CEA-IRFU)   ()
13:15 Influence of bolt positions and electrode structure in Yoroi-coil structure on stress distribution in an HTS coil winding - Mr. Masahiro Kato (Tohoku University)   ()
13:15 Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires - Dr. Jung-Bin Song (Department of Materials Science and Engineering, Korea University, Seoul, Korea)   ()
13:15 Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF - Giorgio Vallone (CERN)   ()
13:15 Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade - Giorgio Vallone (CERN)   ()
13:15 Mechanical Performance of a Superconducting 28 GHz Ion Source Magnet for FRIB - Dr. Heng Pan (Lawrence Berkeley National Lab)   ()
13:15 Mechanical properties of bulk MgB2 superconductors processed by spark plasma sintering at various temperatures - Dr. Akira Murakami (Ichinoseki College)   ()
13:15 Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization - Mr. Keita Takahashi (Iwate University)   ()
13:15 Simulation of the ITER Toroidal Field Coil Case welding distortion using Finite Element Method - Marc Jimenez (Fusion For Energy)   ()
13:15 Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization - Prof. Hiroyuki Fujishiro (Iwate University)   ()
13:15 Strain characteristics of Ic in brass laminated GdBCO CC tapes under various temperature and magnetic field conditions - Hyung-Seop Shin (Andong National University)   ()
13:15 Strain response of superconducting magnets during excitation and quench training based on FBG and cryogenic strain gauge measurements - Mr. Qiang Hu (Key Laboratory of Mechanics on Western Disaster and Environment, Ministry of Education, College of Civil Engineering and Mechanic, Lanzhou University; Institute of Modern Physics of Chinese Academy of Science)   ()
13:15 Stress-strain behaviors of a Nb3Sn Superconducting prototype solenoid for ECR magnet during winding, cooldown and energizing processes - Mingzhi Guan (The Institute of Modern Physics,Chinese Academy of Sciences)   ()
13:15 Study of bending behavior in Nb3Sn strands - Dr. Tsutomu Hemmi (National Institutes for Quantum and Radiological Science and Technology)   ()
13:15 Tail Component Qualification for the EU ITER PF Coils - Mr. Mikel Bilbao Gutierrez (Fusion for Energy)   ()
Tue-Af-Po2.10 (until 15:00) ()
13:15 A finite element model based on T-A formulation for simulating second generation high temperature superconducting coils/stacks with large number of turns - Fei Liang (Bath University)   ()
13:15 A Hybrid Method for the Sound Pressure Lever Analysis of a Balanced Armature Receiver - Ms. Dan-Ping Xu (School of Mechanical Engineering, Pusan National University)   ()
13:15 A Study on Analytical Methods of FEM-based Edge Heating System - Mr. Geochul Jeong   ()
13:15 Application of hierarchical matrices to large-scale electromagnetic field analyses of coils wound with coated conductors - Naoki Tominaga (Kyoto University)   ()
13:15 Comparative study between in-situ measurements and a 3D efficient model for the computation of magnetic fields  in High Field Polyhelix magnets - Dr. Christophe Trophime (LNCMI - CNRS)   ()
13:15 Eddy Current Loss Analysis of Surface Mount High Speed Permanent Magnet Motor Base on Multi-physics Fields - Prof. Guangwei Liu (Shenyang University of Technology)   ()
13:15 Improved Modeling of Canted-Cosine-Theta Magnets - Lucas Brouwer (Lawrence Berkeley National Laboratory)   ()
13:15 Optimal Design of the LTS Magnet employing Genetic Algorithm for EMPS - Dr. Jang Jae Young (Korea Basic Science Institute)   ()
13:15 Refinement and application of a generic CFD toolkit covering the heat flows in combined solid–liquid systems to investigate thermal quench limits of superconducting magnets - Fouad Aabid (CERN)   ()
13:15 Research on Temperature Rise and Temperature Control for Giant Magnetostrictive Transducer - Prof. Wenmei Huang (Key Laboratory of Electro-Magnetic Field and Electrical Apparatus Reliability of Hebei Province)   ()
13:15 Shielding Current Analysis in High-Temperature Superconducting Film and Its Application - Teruou Takayama (Yamagata University)   ()
13:15 STEAM: A co-simulation framework for modelling superconducting accelerator magnet circuits - Lorenzo Bortot (CERN)   ()
13:15 The Automatic Quench Analysis Software for the High Luminosity LHC Magnets Evaluation at CERN - Fatima Gomez De La Cruz (CERN)   ()
13:15 Thermal analysis of an axial flux PM machine with interactive reaction considerations - Prof. Jianning Dong (Delft University of Technology)   ()
13:15 Thermal-magnetic-mechanical characteristics associated with flux jump behaviors in MgB2 bulks - Dr. Jing Xia (China Academy of Engineering Physics)   ()
13:15 Thermo-Magnetic Mechanical stability study of the MICE Spectrometer Solenoids - Heng Pan (LBNL)   ()
13:15 Towards real time computation of 3D magnetic field in parametrized Polyhelix magnets using a reduced basis Biot-Savart model - Mr. Romain Hild (IRMA Strasbourg)   ()