Name: MT25 Conference 2017 - Timetable, Abstracts, Orals and Posters
Start: 2017-08-27T01:30:00+02:00
End: 2017-09-01T21:30:00+02:00
Location: RAI Congress Center, Amsterdam, The Netherlands

2G HTS Magnet Stability Improvement via V2O3 Material and perforated HTS Wire (in session "Wed-Af-Po3.11")

3D Electromagnetic Analysis of Tubular Permanent Magnet Linear Launcher (in session "Tue-Af-Po2.06")

3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device (in session "Mon-Af-Po1.04")

3D Magnetic and Mechanical Design of Coil Ends for the Racetrack Model Magnet RMM (in session "Wed-Af-Po3.01")

3D mechanical design and analysis of 20-T twin-aperture common-coil accelerator dipole magnet (in session "Wed-Af-Po3.01")

10 kA joints for Multi-Tape HTS Cables (in session "Thu-Mo-Or32")

24kA DC Energy Extraction Switch for LARP Magnet Testing at BNL (in session "Thu-Af-Po4.09")

32T Protection Design and Operation (in session "Tue-Mo-Or15")

60 Tesla Pulse Coil Design and Manufacturing Facility (in session "Wed-Af-Or27")

[Invited] Commissioning of the 36 T Series-Connected Hybrid Magnet at the NHMFL (in session "Mon-Mo-Or2")

[Invited] High Field Twin-aperture Dipole Magnet R&D for SPPC Pre-study (in session "Mon-Af-Or6")

[Invited] HTS field coils with robust design for a superconducting wind turbine generator (in session "Tue-Mo-Or14")

[Invited] JT-60SA Magnet System Status (in session "Mon-Af-Or4")

[Invited] Progress in the Construction of the 43 T Hybrid Magnet at LNCMI-Grenoble (in session "Mon-Mo-Or2")

[Invited] Recent Progress of Superconducting Induction Heater with HTS magnets in Korea (in session "Tue-Mo-Or11")

[Invited] The commissioning of a hybrid magnet at CHMFL (in session "Mon-Mo-Or2")

[Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps (in session "Thu-Mo-Or28")

A 2.5 T, 1.25 m free bore superconducting magnet for the Magnum-PSI linear plasma generator (in session "Wed-Af-Or22")

A 8T Focusing Superconducting Solenoid for FRIB (in session "Tue-Af-Or16")

A 9 T Cryocooler Cooled High current density NbTi superconducting magnet (in session "Tue-Af-Po2.04")

A Compact Test Bed for Critical Current Evaluation on High Temperature Superconducting Tape Samples (in session "Wed-Af-Po3.03")

A Design of Outer Yoke and Enclosure Considering Magnet Eddy Current Loss of Magnetic Gear (in session "Wed-Af-Po3.07")

A device for characterizing the circumferential strain dependence of the critical current in MgB$_{2}$ wires and tapes (in session "Thu-Af-Po4.11")

A Digital Electrometric Method for Measuring the AC loss of a HTS Coil (in session "Wed-Af-Po3.12")

A Facile Method to Estimate Screening Current-Induced Fields in REBCO Pancake Coils (in session "Wed-Af-Po3.12")

A fast 10 kA current switch for High Temperature Superconductor accelerator magnets (in session "Thu-Af-Po4.09")

A field mapper for the determination of the multipole components of the curved HESR dipole magnets (in session "Thu-Af-Po4.10")

A Field Modulated Linear Permanent Magnet Generator for Direct-Drive Wave Energy Conversion (in session "Thu-Af-Po4.06")

A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study (in session "Mon-Af-Po1.03")

A long solenoid HTS magnet with the Joint-less winding technique (in session "Tue-Af-Po2.05")

A method based rotating coil to find magnetic center for series quadrupole magnets at IMP (in session "Thu-Af-Po4.10")

A method of critical current measurement for HTS tape using pulsed current (in session "Wed-Af-Po3.09")

A Method to Improve Forming Accuracy in Electromagnetic Forming of Sheet Metal Based on Field Shaper (in session "Thu-Af-Po4.07")

A Modularon-PCB-boardhigh voltage capacitor bank charger (in session "Tue-Af-Po2.04")

A momentum-preserved node concept for thermohydraulic analysis of fusion magnet (in session "Thu-Af-Po4.02")

A Multi-Phase Doubly-Fed Doubly-Salient HTS Linear Motor for Vertical Transportation (in session "Mon-Af-Po1.04")

A Multi-Tooth Axial Field Flux-Switching Hybrid Excitation Machine (in session "Thu-Af-Po4.05")

A multifunction test facility of cryogenic-electro-magneto- mechanical properties for superconducting wires/tapes under multi-fields (in session "Thu-Af-Po4.11")

A new approach of tube bugling based on electromagnetic attractive force (in session "Tue-Mo-Or11")

A New Magnetic Field Modulation Type of Brushless Double-Fed Machine (in session "Tue-Af-Po2.06")

A New Partitioned Stator Hybrid Excitation Flux Switching Motor with Ferrite Permanent Magnet (in session "Tue-Af-Po2.06")

A new three-level repetitive pulse magnetic field power supply system (in session "Mon-Af-Po1.12")

A new understanding of the heat treatment of Nb3Sn superconducting wires (in session "Wed-Mo-Pl6")

A novel clamping method for resistive magnets (in session "Tue-Af-Po2.04")

A Novel Design of Repetitive Transcranial Magnetic Stimulator with Monophasic and Biphasic Waveform (in session "Thu-Af-Po4.07")

A novel digital magnet power supply approach (in session "Mon-Af-Po1.12")

A Novel Five-phase Double-Stator Tubular Fault-tolerant Flux-Modulation Permanent Magnet Motor (in session "Tue-Af-Po2.06")

A novel method for greatly reduced edge effects design in CCT magnets (in session "Wed-Af-Po3.01")

A Novel Partitioned Stator Flux-Reversal Memory Machine (in session "Thu-Af-Po4.05")

A novel quench detection method using radio frequency wave technology (in session "Thu-Af-Po4.09")

A passively shielded HTS magnet for polarized neutron scattering (in session "Mon-Af-Po1.02")

A performance study on the flux pump based modularized exciter for a large-scale HTS wind power generator (in session "Wed-Af-Po3.06")

A persistent current 1.3 GHz (30.5 T) NMR (in session "Wed-Mo-Pl6")

A portable superconducting magnet system with trapped field > 3 T (in session "Mon-Af-Or9")

A Prototype Conductor by React&Wind Method for the EUROfusion DEMO TF Coils (in session "Wed-Af-Or22")

A Prototype of a 500 A class Bi-2223/AgAu Current Lead for a Conduction Cooled Superconducting Magnet (in session "Mon-Af-Po1.09")

A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K (in session "Thu-Mo-Or29")

A set of equipment for measuring and investigating the magnetic field at the reference magnet of the NICA booster (in session "Thu-Af-Po4.11")

A Spoke-Type PM Vernier Machine with Multi Working Harmonics and Enhanced Flux Modulation Effect (in session "Thu-Af-Po4.05")

A Statistical Analysis of Electrical Faults in the LHC Magnets (in session "Mon-Mo-Or1")

A Study of Irradiation Effects on Thermal Characteristics of COMET Pion Capture Solenoid (in session "Thu-Af-Po4.01")

A study on Double Layer V-Shape Magnet Type IPMSM design in view of demagnetization (in session "Tue-Af-Po2.06")

A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand (in session "Mon-Af-Po1.08")

A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions (in session "Mon-Af-Po1.10")

A Study on Temporal Stabilization of Magnetic Flux Focused by a Superconducting Magnetic Lens (in session "Wed-Af-Po3.03")

A Study on the Auto-MTPT Algorithm to Make the Speed-based Current-map of IPMSM for Traction of Inwheel (in session "Thu-Af-Po4.05")

A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system (in session "Mon-Af-Po1.04")

A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system (in session "Mon-Af-Po1.04")

A Study on the Position Signal Compensation Control Technique of Hall Sensor Generated by Uneven Magnetic Flux Density (in session "Mon-Af-Po1.04")

A Study on the Power Converter Performance Comparison & Optimal design induction heating coil for IH jar (in session "Wed-Af-Po3.08")

A Study on the Selection of the Optimal Number of Poles for Maximizing the Magnetic Flux of Spoke type Permanent Magnet Motor (in session "Tue-Af-Po2.06")

A Study on the Sextupole Design with Iron Yoke inside Solenoids for 56 GHz ECR Ion Source (in session "Thu-Af-Po4.01")

A Study on the V-t Characteristics of PPLP according to Electric Field Uniformity for a Superconducting Transformer (in session "Wed-Af-Po3.10")

A Study on Thermal and Electrical Characteristic of Metallic Cladding GdBCO Coil (in session "Wed-Af-Po3.11")

A Study on Thermal and Electrical Stabilities of GdBCO Coils Impregnated with Epoxy Composites Using Surface-Treated Carbon Nanotube Fillers (in session "Wed-Af-Po3.11")

A Superconducting Linear Variable Reluctance Machine for Urban Transportation Systems (in session "Mon-Af-Po1.05")

A Superconducting Magnetic Density Separation Laboratory Demonstrator (in session "Wed-Af-Po3.07")

A Superconducting Vernier Motor for Electric Ship Propulsion (in session "Wed-Af-Po3.05")

A Synthetic Frozen Permeability Method to Separate PM torque in Hybrid Permanent Magnet Variable-Flux Machine (in session "Mon-Af-Po1.04")

A Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/70-mm MgB2 Osteoporosis MRI: Two Magnet Design Options (in session "Thu-Af-Po4.04")

A transverse flux single-phase tubular switched reluctance linear motor (in session "Mon-Af-Po1.04")

A Two-dimensional Equivalent Mode of a Homopolar Synchronous Machine (in session "Thu-Af-Po4.06")

A Wide Aperture Superconducting Vector Magnet for photon beamlines: WAVE Photons (in session "Wed-Af-Po3.08")

AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor (in session "Tue-Af-Po2.06")

AC loss analysis of the armature windings of a fully HTS rotating machine with dual field windings (in session "Wed-Af-Po3.06")

AC Loss and inter-tape resistance in various HTS cable configurations (in session "Tue-Af-Or18")

AC loss distribution in two-layer HTS twisted cable (in session "Wed-Af-Po3.09")

AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration (in session "Tue-Af-Or18")

AC Loss Measurement of High-Tc Superconducting Coils Wound by Stacked Conductors under the Various Electro-magnetic Conditions (in session "Wed-Af-Po3.12")

AC Loss of a Quasi-isotropic Strand Stacked by 2G Wires by Numerical Simulation in Cryogenic Temperature (in session "Wed-Af-Po3.12")

AC Loss Properties of Stacked Multifilamentary REBCO Superconducting Tapes (in session "Wed-Af-Po3.12")

Accurate 3D Field Mapping of an Iron Shielded Split Coil Spectrometer Magnet (in session "Tue-Af-Po2.02")

Accurate Measurement of the Superconducting Current in 2G HTS Coil with Rogowski coil in Cryogenic Environment (in session "Thu-Af-Po4.11")

Additional AC loss properties of REBCO superconducting two-strand parallel conductors (in session "Wed-Af-Po3.12")

Advanced mathematical model of ITER PF1 coil for manufacture quality control (in session "Thu-Af-Po4.02")

Advanced superconductors developed at WST (in session "Tue-Af-Pl3")

Advanced tube type Nb3Sn conductor and its applications in Hyper Tech (in session "Thu-Mo-Or30")

Air-gap Control for Superconducting-Hybrid Magnetic Levitation Systems via Linear Matrix Inequality Optimization (in session "Wed-Af-Po3.07")

An Electromagnetic and Structural Finite Element Model of the ITER TF Coils (in session "Thu-Af-Po4.02")

An Engineering Perspective on Ultra High-Field Magnets (in session "Thu-Mo-Or33")

An Experimental Stability Diagram for ReBCO Roebel Cables at 4.2 K and Applied Fields up to 12 T (in session "Tue-Af-Po2.08")

An FPGA-based Quench Detector and Data Acquisition System for Superconducting Insertion Devices (in session "Thu-Af-Po4.09")

Analyses of the ITER Poloidal Coil joints cold test results. (in session "Wed-Af-Or26")

Analysis and application of discrete Halbach magnet array with unequal arc lengths and unequally-changed magnetization directions (in session "Tue-Af-Po2.06")

Analysis and Optimal Design of the Transmission Coils for the Wireless Power Transmission System (in session "Mon-Af-Po1.07")

Analysis and Optimization of Adjustable Magnetic Fluid Damper in DC Magnetic Field (in session "Wed-Af-Po3.08")

Analysis of a protected Loss Of Flow Accident (LOFA) in the ITER TF coil cooling circuit (in session "Thu-Af-Po4.02")

Analysis of dynamic deformation and disturbing torque of superconducting spinning rotor (in session "Mon-Af-Po1.05")

ANALYSIS OF EARLY QUENCH DEVELOPMENT IN JT-60SA TOROIDAL FIELD COILS TESTED IN THE COLD TEST FACILITY (in session "Tue-Af-Po2.03")

Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter (in session "Tue-Af-Po2.07")

Analysis of losses in superconducting magnets based on the Nb3Sn Rutherford cable configuration for future gantries (in session "Wed-Af-Po3.04")

Analysis of Magnetic Polarity Distribution for a Dual-rotor Switched Reluctance Machine (in session "Mon-Af-Po1.04")

Analysis of Magnetic Stiffness in a Balanced Armature Receiver Considering the Effects of Soft Magnetic Material Saturation (in session "Thu-Af-Po4.05")

Analysis of Minimum Quench Energy of ITER NbTi and Nb3Sn CICCs (in session "Mon-Af-Or9")

Analysis of the coupling factor according to diameter of superconducting transmitting and receiving coils (in session "Mon-Af-Po1.07")

Analysis of the Nonlinear Characteristics of Magnetic Circuit in a Balanced Armature Receiver (in session "Thu-Af-Po4.05")

Analysis of the Training Behaviour of the MICE Spectrometer Solenoid (in session "Thu-Af-Po4.01")

Analysis of Torque Characteristics according to Gear ratio of Coaxial Magnetic Gear (in session "Wed-Af-Po3.08")

Analysis on Design Sensitivity of Permanent Magnet Motor using Lumped Magnetic Circuit Method (in session "Tue-Af-Po2.06")

Analytic Study of the Active Quench Detection Method for the HTS Magnet using Resonance circuit (in session "Thu-Af-Po4.09")

Analytical approach to maximize the torque density with size constraints for PMSM (in session "Thu-Af-Po4.05")

Analytical Calculation for Rotor Eddy-Current Losses in Permanent Magnet machine (in session "Tue-Af-Po2.06")

Analytical investigation in bending characteristic of pre-twisted HTS tapes (in session "Mon-Mo-Or3")

Analytical Investigation of the On-load Electromagnetic Performance of Magnetic-Geared Permanent-Magnet Machines (in session "Wed-Af-Po3.05")

Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet. (in session "Tue-Af-Po2.05")

Analytical methodology for efficient design of pulsed electromagnetic blank holding system (in session "Thu-Af-Po4.07")

Analytical Modeling and Experimental Verification for Electromagnetic Analysis of Permanent Magnet Linear Synchronous Machines with Horizontally Magnetized Permanent Magnets accounting for Flux-Passing Iron Pole (in session "Wed-Af-Po3.06")

Analytical Polynomial Models of Nonlinear Magnetic Flux Linkage for Switched Reluctance Motor (in session "Mon-Af-Po1.04")

Application of hierarchical matrices to large-scale electromagnetic field analyses of coils wound with coated conductors (in session "Tue-Af-Po2.10")

Applied metrology in the production of superconducting model magnets for particle accelerators (in session "Thu-Af-Po4.01")

Assembly of the Nb3Sn dipole magnet FRESCA2 (in session "Wed-Af-Po3.01")

Assessment of electrical insulation of a superconducting magnet winding pack under severe loading conditions (in session "Wed-Af-Po3.10")

Asymmetry in wireless power transfer between a superconducting coil and a copper coil (in session "Mon-Af-Po1.07")

Auxiliary equipment commissioning of the 11.7 T MRI Iseult magnet (in session "Thu-Af-Po4.04")

Basic Design and Progress of Central Solenoid Model Coil for CFETR (in session "Wed-Af-Po3.02")

Basic study of superconducting coils in rectifier transformers for railway electrification system (in session "Tue-Af-Po2.07")

Beam Trajectory Simulation Considering Each Harmonic Components in HTS Quadruple Triplet (in session "Mon-Af-Po1.01")

Bending of CORC cables, Experiments and Modeling (in session "Wed-Mo-Or21")

Bending-peeling method to measure interface strength of YBCO tape (in session "Thu-Af-Po4.08")

Best Posters Awards (in session "Thu-Af-Pl9")

Cable-in-Conduit Dipoles for the Ion Ring of JLEIC (in session "Thu-Af-Po4.03")

Capability improvement design method considering eddy current loss reduction of axial-flux permanent magnet coupling with Halbach array structure using 3-D FEM. (in session "Wed-Af-Po3.08")

Capacity Allocation of a Superconducting Flywheel Storage System (SFES) in Hybrid Energy Storage System for Wind Generation (in session "Mon-Af-Po1.05")

Cascaded Multilevel Converter with Floating Capacitors for a small tokamak, PHiX (in session "Mon-Af-Po1.12")

Changes of superconducting properties due to the unidirectional tensile deformation on bronze-processed Nb3Sn multifilamentary wires using various Cu-Sn-Zn ternary alloy matrices (in session "Mon-Af-Po1.08")

Characterisation of HTS insulated coil for high field insert (in session "Thu-Mo-Or31")

Characteristic Analysis and Experimental Verification for a Double-sided Permanent Magnet Linear Synchronous Generator According to Magnetization Array (in session "Wed-Af-Po3.06")

Characteristic Analysis for the Influence of Auxiliary Teeth and Notching on the Reduction of the Detent Force of a Permanent Magnet Linear Synchronous Generator (in session "Wed-Af-Po3.06")

Characteristic Analysis of Novel Outer Rotor Fan-type PMSM for Increasing Power Density (in session "Thu-Af-Po4.05")

Characteristic Analysis of Permanent Magnet Synchronous Machine Considering Combination of Time Harmonics (in session "Thu-Af-Po4.05")

Characteristic analysis of SFCL DC interrupting system in Windfarm (in session "Tue-Af-Po2.07")

Characteristics of an HTS dipole magnet (in session "Wed-Af-Po3.03")

Characteristics of current bypassing and transient stability in partial insulation HTS coils (in session "Wed-Af-Po3.11")

Characteristics of superconducting coil-type DC Fault Current Limiter to increase stability in DC power system (in session "Tue-Af-Po2.07")

Characteristics of SWPT according to the number of transmitting and receiver coils. (in session "Mon-Af-Po1.07")

Characterization of an internal cooling high temperature composite superconductor with REBCO for large scale energy storage applications (in session "Thu-Af-Po4.08")

Characterization of the Stress Distribution on Nb3Sn Rutherford Cables Under Transverse Compression (in session "Tue-Af-Po2.09")

CHARGING 2G HTS DOUBLE PANCAKE COILS WITH THE HTS FLUX PUMP METHOD (in session "Tue-Af-Po2.11")

Coil Dominated Superconducting Multiplets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) geometry (in session "Tue-Af-Or16")

Cold powering test results of the Nb3Sn FRESCA2 block coil magnet (in session "Thu-Mo-Or28")

Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN (in session "Mon-Af-Or7")

Cold Tests and Magnetic Characterization of a Superconducting Magnet for a Compact Cyclotron for Radioisotope Production (in session "Wed-Af-Po3.04")

Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab (in session "Mon-Af-Po1.02")

Compact, high field coils made with strong, rectangular Bi2212 superconductor wire (in session "Thu-Mo-Or31")

Comparative Analysis of Electromagnetic Characteristics for HTS Motor Considering PWM Schemes in Voltage Source Inverter (in session "Thu-Af-Po4.05")

Comparative study between in-situ measurements and a 3D efficient model for the computation of magnetic fields in High Field Polyhelix magnets (in session "Tue-Af-Po2.10")

Comparative Study of Magnetic Characteristics between Air-Core and Iron-Core High-temperature Superconducting Quadruple Magnet (in session "Thu-Af-Po4.01")

Comparative Study on Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiters (SFCLs) with Common Connection Point between Two Secondary Windings (in session "Tue-Af-Po2.07")

Comparison between AC loss measurements and analyses in coil assemblies with different geometries and conductors (in session "Wed-Af-Po3.12")

Comparison of HTS Quench detection methods based on Spontaneous Raman and Rayleigh Scattering in Optical Fibers (in session "Wed-Af-Or24")

Comparison of Measured and Simulated Quench Behaviors of Superconducting Magnets for Jefferson Lab’s 11 GeV Super High Momentum Spectrometer (in session "Mon-Af-Po1.10")

Completion and test of the first ITER TF coil winding pack by Europe (in session "Tue-Mo-Or13")

Completion of ENEA’s procurement for 9 TF coils of JT-60SA tokamak (in session "Mon-Af-Or4")

Completion of the French JT-60SA Toroïdal Field Magnet Contribution (in session "Wed-Af-Po3.02")

Conceptual Design and Evaluation of a HTS Magnet for a SMES Used in Improving Transient Performance of a Grid-Connected PV System (in session "Mon-Af-Po1.06")

Conceptual Design and Performance Evaluation of a 35 kV / 500 A Flux-Coupling-Type SFCL for Protection of a DFIG-Based Wind Farm (in session "Tue-Af-Po2.07")

Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider (in session "Mon-Af-Or6")

Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field (in session "Thu-Af-Po4.11")

Conceptual Design of a Superconducting Magnet Stacked by REBCO Annulus Plates (in session "Wed-Af-Po3.03")

Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications (in session "Thu-Af-Po4.01")

Conductor for MRI magnets beyond NbTi (in session "Wed-Mo-Or20")

Conductor Performance of Nb3Sn Sample for CFETR CSMC coil (in session "Wed-Af-Or22")

Constructing a permanent magnet phase shifter (in session "Thu-Af-Po4.03")

Construction and test of the NHMFL 32 T superconducting magnet (in session "Tue-Af-Po2.04")

Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field (in session "Mon-Af-Po1.12")

Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet (in session "Tue-Af-Po2.05")

Construction and Testing of Curved ReBCO Coils (in session "Thu-Af-Po4.01")

Contact resistance between REBCO tapes coated with a thin resistive layer (in session "Thu-Mo-Or32")

Control design of a magnetic catheter navigation system for cardiac arrhythmias (in session "Mon-Af-Or5")

Controllability of the contact resistance of 2G HTS coil with metal insulation (in session "Mon-Af-Po1.03")

Cool-down of LTS magnets by a closed loop helium gas flow (in session "Mon-Af-Po1.11")

Cooling experiment analysis of a prototype thermal siphon system for single crystal ingot growth magnet (in session "Mon-Af-Po1.11")

Core Loss Analysis of Permanent Magnet Linear Synchronous Generator with Slotless Stator (in session "Thu-Af-Po4.06")

Core Loss Calculation of Permanent Magnet Machines Using Analytical Method (in session "Tue-Af-Po2.06")

Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet (in session "Thu-Mo-Or33")

Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling (in session "Wed-Af-Or26")

Coupling of Mechanical and Magneto-Thermal Models of Superconducting Magnet by Means of Mesh Based Interpolation (in session "Thu-Mo-Or33")

Creepage Discharge Characteristics of a Solid Insulation Material for Superconducting Applications (in session "Wed-Af-Po3.10")

Critical Current Properties of Precisely Cation Composition Controlled RE123 Melt-Solidified Bulks (in session "Wed-Af-Po3.10")

Cryo-free multisection superconducting magnetic system with MgB2 coil (in session "Mon-Af-Po1.03")

Cryogen Recondensed Cooling System for Electron Beam Ion Source Employing 7 T Superconducting Solenoid Magnet (in session "Mon-Af-Po1.11")

CRYOGENIC ENVIRONMENTS FOR QUANTUM TECHNOLOGIES (in session "Thu-Mo-Or29")

Cryogenic Hybrid Magnet with Praseodymium Permanent Magnet (in session "Wed-Af-Po3.10")

Cryogenic Oscillating Heat Pipe for Conduction-cooled Superconducting Magnets (in session "Mon-Af-Po1.11")

CRYOGENIC TECHNOLOGIES OF THE NICA ACCELERATOR COMPLEX (in session "Mon-Af-Po1.11")

Cryogenics Engineering for Superconducting Magnets at DEMACO (in session "Thu-Mo-Or29")

Cryostat Design of 230 MeV Superconducting Isochronous Cyclotron for Proton Therapy (in session "Wed-Af-Po3.04")

Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament (in session "Tue-Af-Po2.08")

Current Center Line Measurement of ITER TF Coil (in session "Tue-Af-Po2.03")

Current Limiting and Recovery Characteristics of A Trigger Type SFCL using Double Quench (in session "Tue-Af-Po2.07")

Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiter (SFCL) due to Winding Direction of Additional Secondary Winding (in session "Tue-Af-Po2.07")

Current sharing properties of REBCO superconducting parallel conductors wound into a coil (in session "Tue-Af-Po2.08")

Current transport characteristics of a superconducting joint between REBCO conductors made by a novel method (in session "Mon-Af-Po1.09")

Decoupling Control Based on Linear/Nonlinear Active Disturbance Rejection Switching for 3 Degrees of Freedom HMB (in session "Mon-Af-Po1.05")

Decoupling Control of Bearingless Permanent Magnet Synchronous Motor Using ANFIS Inverse System (in session "Thu-Af-Po4.05")

Decoupling Control of Bearingless Synchronous Reluctance Motor Based on Differential Geometry (in session "Mon-Af-Po1.05")

Decoupling Velocity and Thermal Effect in the Electromagnetic Ring Expansion Test (in session "Mon-Af-Po1.07")

Defect formation and improved critical current density in YBCO superconducting films by electron beam irradiation (in session "Tue-Af-Or17")

Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K (in session "Mon-Af-Po1.03")

Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion (in session "Tue-Af-Po2.09")

Delamination Diagnostic Method of REBCO Tapes Using Ultrasonic Waves (in session "Thu-Af-Po4.11")

DEMO Central Solenoid Design Based on the Use of HTS Sections at Highest Magnetic Field (in session "Thu-Af-Po4.02")

Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications (in session "Wed-Mo-Or20")

Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets (in session "Wed-Mo-Or21")

Design and analysis of a less-rare-earth PM-assisted synchronous reluctance machine considering tradeoffs of PM flux linkage and magnetic saliency (in session "Wed-Af-Po3.05")

Design and Analysis of a Novel Large Mover Slot Opening Flux-Reversal Linear Permanent Magnet Machine with HTS Bulks (in session "Mon-Af-Or8")

Design and Analysis of A Novel Modular-Stator Tubular Vernier Permanent-Magnet Machine (in session "Mon-Af-Po1.04")

Design and Analysis of a Transverse Flux Hybrid Field Modulated Linear Generator for wave energy conversion (in session "Thu-Af-Po4.06")

Design and Analysis of an Energy-Extraction System for High Current HTS Magnets (in session "Thu-Af-Po4.09")

Design and analysis of an interior permanent magnet synchronous machine with multi flux barriers based on electromagnetic-mechanical coupling method (in session "Wed-Af-Po3.05")

Design and Analysis of Marine Current Power Generation System Based on a Magnetic Gear (in session "Thu-Af-Po4.06")

Design and Analysis of Outer-Rotor Permanent Magnet Synchronous Machine With Amorphous Stator Core (in session "Tue-Af-Po2.06")

Design and characterisation of tunable high gradient permanent magnets quadrupoles (in session "Tue-Af-Po2.02")

Design and comparative analysis of MgB2 and YBCO wire-based superconducting wind power generators (in session "Thu-Af-Po4.06")

Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN (in session "Mon-Af-Or7")

Design and construction of the magnet-cryostat for the SuperKEKB Interaction Region (in session "Mon-Af-Po1.11")

Design and construction of the main magnet for a 230 MeV Superconducting Cyclotron (in session "Wed-Af-Po3.04")

Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems (in session "Thu-Af-Po4.04")

Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator (in session "Mon-Af-Or7")

Design and fabrication of HTS DC bias coil for 500kV saturated iron core fault current limiter (in session "Tue-Af-Po2.07")

Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4m Long MQXF Coil. (in session "Mon-Af-Po1.01")

Design and Implementation of Ferromagnetic Shims for a 3-T 100 mm All-REBCO No-Insulation Magnet (in session "Tue-Af-Po2.05")

Design and Initial Results of a Novel in-situ A.C. loss Measurement in Axial Flux Synchronous Machine (in session "Mon-Af-Po1.04")

Design and magnetic measurements of a hybrid wiggler for SR research program at VEPP-4 (in session "Thu-Af-Po4.03")

Design and manufacture of Solenoid center deviation measurement device (in session "Thu-Af-Po4.11")

Design and Manufacturing of the First Industrial-Grade CLIQ Units for the Protection of Superconducting Magnets for the High-Luminosity LHC Project at CERN (in session "Tue-Mo-Or15")

Design and measurent of a 2.4 tesla superbend magnet prototype at SSRF (in session "Tue-Af-Po2.02")

Design and Operation of the Pulsed Magnets at the Dresden High Magnetic Field Laboratory (in session "Wed-Af-Or27")

Design and Operation Performance Research of Brushless Doubly-Fed Generator with Cage Bar Assisted Reluctance Rotor (in session "Wed-Af-Po3.06")

Design and performance analysis of a cryostat for pulsed high magnetic field using a small scale helium liquefaction system (in session "Mon-Af-Po1.11")

Design and Performance Results of Optimal Vapor-Cooled MgB2 Current Leads for a 1.5 T MRI Magnet (in session "Mon-Af-Po1.09")

Design and Performance Study of a 1 MW Induction Heater with HTS DC magnet (in session "Thu-Af-Po4.07")

Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University (in session "Mon-Af-Po1.12")

Design and Research of Cryostat for 3W1 SC Wiggler Magnet (in session "Mon-Af-Po1.11")

Design and structural analysis of induction type coilgun system (in session "Wed-Af-Po3.08")

Design and technical development of a high-resolution 1.3 GHz NMR magnet (in session "Mon-Af-Or5")

Design and Test of 10 kV/400 A Flux-coupling Type Superconducting Fault Current Limiting Module (in session "Tue-Af-Po2.07")

Design and Test of a superconducting levitation system for gravity measurement (in session "Tue-Mo-Or14")

Design and Test of the Cryogenic Cooling System for the Rotating Magnetic Validator of the 10 MW SUPRAPOWER Offshore Superconducting Wind Turbine (in session "Thu-Mo-Or29")

Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4 (in session "Mon-Af-Or7")

Design and tests of the 100 T triple coil at LNCMI (in session "Wed-Af-Or27")

Design and thermal analysis of an HTS module coil for a 12 MW wind power generator (in session "Thu-Af-Po4.06")

Design and verification test of a flux-coupling type superconducting fault current limiter (in session "Tue-Af-Po2.07")

Design Considerations and Characteristics of Antenna Arrays for Wireless Power Charging System in Superconducting MAGLEV (in session "Tue-Af-Po2.11")

Design considerations of gantry beamline with fast energy modulation for HUST Proton Therapy Facility (in session "Wed-Af-Po3.04")

DESIGN CRITERIA FOR HIGH-SPEED PERMANENT MAGNET SYNCHRONOUS MOTORS CONSIDERING ROTOR MAGNET AND SLEEVE MATERIAL (in session "Wed-Af-Po3.05")

Design for an Upgrade of the NHMFL 32-mm Bore Resistive Magnet (in session "Wed-Af-Or27")

Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System (in session "Mon-Af-Po1.04")

Design of a cosine-theta dipole magnet considering influence of shielding-current-induced field on field quality (in session "Thu-Af-Po4.01")

Design of a dipole with longitudinally variable field using permanent magnets for CLIC damping rings (in session "Wed-Mo-Or19")

Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field (in session "Mon-Af-Po1.12")

Design of a laser-driven kiloTesla magnetic bottle (in session "Wed-Af-Or22")

Design of a Magnet Bore Field Mapper Consisting of a Cylindrically Fixed Array of Inexpensive Hall Elements to Probe Low-Order Spherical Harmonics in Real Time (in session "Mon-Af-Or9")

Design of a Nb3Sn 16 T block dipole for the Future Circular Collider (in session "Mon-Af-Or6")

Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider (in session "Wed-Af-Po3.01")

Design of a Non Rare Earth Spoke Type Permananet Magnet Motor for Considering Magnetization after Assembly (in session "Thu-Af-Po4.05")

Design of a Novel Double-Stator Flux Reversal Machine with Hybrid HTS and PM Excitations (in session "Tue-Af-Po2.06")

Design of a Short Period Permanent Magnet Helical Undulator (in session "Thu-Af-Po4.03")

Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field (in session "Mon-Af-Po1.12")

Design of dipole magnet integral measurement system for HTPTF (in session "Thu-Af-Po4.11")

Design of Dual-Channel Switched Reluctance Motor for Safety-Critical Applications Using Two 3-Phase Standard Inverters (in session "Mon-Af-Po1.04")

Design of hybrid thrust magnetic bearing for heavy rotating shaft considering self-weight compensation according to axial load (in session "Wed-Af-Po3.07")

Design of maximum power density of TVC driving motor for space launch vehicle considering space environment (in session "Mon-Af-Po1.07")

Design of prototype magnets for HUST Proton Therapy beamline (in session "Wed-Af-Po3.04")

Design of the Conduction-cooled YBCO Magnet for a MW Class Induction Heating System (in session "Mon-Af-Po1.07")

Design of the internal embedded joints for the EU DEMO TF coils (in session "Mon-Af-Po1.09")

Design of the resistive insert coils for the HFML 45 T Hybrid Magnet (in session "Mon-Mo-Or2")

Design of Vernier Motor considering Irreversible Demagnetization in Permanent Magnet (in session "Mon-Af-Po1.04")

Design Options of a 3-T 900-mm Whole Body MRI Magnet with Selected Commercial MgB2 Wires (in session "Thu-Af-Po4.04")

Design principle of WFSM for Electric Vehicle based magnetic-thermal equivalent circuit (in session "Mon-Af-Po1.04")

Design strategy of interior permanent magnet synchronous motor for maintaining torque performance at flux weakening region (in session "Tue-Af-Po2.06")

Design Studies of High-Field Nb3Sn Dipoles for a post-LHC pp Collider (in session "Wed-Af-Po3.01")

Design Study of a Novel, LHC High-Lumi CCT Orbit Corrector. (in session "Tue-Af-Po2.01")

Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments (in session "Mon-Af-Or5")

Design Study of Main Magnets for the J-PARC RCS Energy Upgrade (in session "Tue-Af-Po2.02")

Design Study on High Frequency Magnets for Magnetic Hyperthermia Applications (in session "Wed-Af-Po3.04")

Design, Assembly and Use of a Device to Eliminate Earth Faults Caused by Foreign Metallic Debris in the LHC Main Dipole Circuit (in session "Thu-Af-Po4.01")

Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet (in session "Thu-Mo-Or31")

Design, Construction and Test of HTS/LTS Hybrid Dipole (in session "Thu-Mo-Or28")

Design, Construction and Testing of Reduced Insulation Solenoids for Fusion (in session "Thu-Af-Po4.02")

Design, fabrication and test of a 2 T superconducting dipole prototype by using tilted solenoids (in session "Thu-Af-Po4.01")

Design, fabrication, and test of a dual-coil system for electromagnetic sheet forming (in session "Wed-Af-Po3.08")

Design, Fabrication, and Test Results of an 18 T Metal Cladding GdBCO Magnet for Axion Detector (in session "Wed-Af-Or25")

Design, manufacture and test of 20 kA binary current leads for the HFML 45 T hybrid magnet (in session "Mon-Af-Po1.09")

Design, Manufacture and Testing of a Pair of Superconducting Solenoids for the Upgrade of the Neutron Spin-Echo Spectrometer J-NSE at the Research Reactor FRM II (Munich) (in session "Wed-Af-Or25")

Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles (in session "Mon-Af-Po1.02")

Design, Testing and Commissioning of 25.7 kA HTS Current Leads (in session "Mon-Af-Po1.09")

Detailed analysis of conduction-cooled MgB2 for use in superconducting magnetic density separation (in session "Wed-Af-Po3.07")

Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC (in session "Mon-Mo-Or1")

Determination of Threshold Electric Field for PPLP Specimen in Liquid Nitrogen Based on the Measurement of Electrical Conductivity (in session "Tue-Af-Po2.12")

Development and Performance of 65 T Fast-cooling User Magnet with Long Service Life (in session "Tue-Af-Po2.04")

Development and test of REBCO canted cosθ dipole coils with CORC® wires (in session "Mon-Af-Or6")

Development of 3 T high-temperature superconducting magnet for MRI (in session "Wed-Mo-Or20")

Development of 7 T superconducting solenoid magnet for Electron Beam Ion Source (in session "Thu-Af-Po4.01")

Development of 52 kA HTS Current Leads for the ITER CS Magnet Test Application (in session "Mon-Af-Po1.09")

Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires (in session "Tue-Af-Or17")

Development of a 1.5 Tesla whole-body MRI Magnet with a very low helium inventory (in session "Mon-Af-Po1.11")

Development of a 2D simplified tool for the analysis of the cooling of the ITER TF winding pack (in session "Thu-Af-Po4.02")

Development of a low temperature superconducting magnet with MgB2 wire for a 10 kW DC induction furnace (in session "Thu-Af-Po4.07")

Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs). (in session "Mon-Af-Or4")

Development of a new high stability of power supply in the superconducting system (in session "Mon-Af-Po1.12")

Development of a REBCO innermost coil for a persistent 400 MHz (9.39 T) LTS/REBCO NMR magnet (in session "Tue-Af-Po2.05")

Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC (in session "Mon-Mo-Or1")

Development of a Superconductive Wind Power Generator within the EcoSwing project (in session "Thu-Af-Pl7")

Development of Analyzing Capability of React and Wind Process based on Strand Trace and Inter-Strand Resistance Measurement System for Cable-In-Conduit Conductor (in session "Tue-Af-Po2.08")

Development of Carbon-Ion Radiotherapy Facilities at NIRS (in session "Wed-Mo-Pl4")

Development of Conduction-cooled Superconducting Split Coil for Metal Melting by DC Induction Heating (in session "Wed-Af-Po3.08")

Development of conductors for thin solenoids for ultra radiation-transparent detector magnets (in session "Mon-Af-Po1.02")

Development of highly saturated dipole magnets for the SAPT booster (in session "Wed-Af-Po3.04")

Development of HTS bulk NMR relaxometry with ring-shaped iron rings (in session "Tue-Af-Po2.05")

Development of liquid nitrogen cooled RE-Ba-Cu-O magnet for NMR use (in session "Mon-Af-Or5")

Development of low resistance splicing between Nb3Sn and NbTi wires to make superconducting wigglers on the base of Nb3Sn superconductor (in session "Tue-Mo-O10")

Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC (in session "Tue-Af-Po2.01")

Development of Nb3Sn strands and Rutherford Cables for 16 T Accelerators Magnets (in session "Thu-Mo-Or30")

Development of prototype high gradient small aperture quadrupole magnets for HEPS-TF (in session "Wed-Mo-Or19")

Development of Quench Antennas for Quench Detection in Nb3Sn Magnets (in session "Mon-Af-Po1.10")

Development of Real-time Monitoring System of the 100 MVA/100 MJ Flywheel Pulse Generator System (in session "Mon-Af-Po1.12")

Development of round flexible HTS CORC® wires for fault current limiting applications (in session "Tue-Af-Po2.07")

Development of SECRAL II superconducting magnet (in session "Tue-Af-Or16")

Development of small diameter HTS Cross Conductors for Fusion Magnet Application (in session "Tue-Af-Po2.08")

Development of Superconductors at Furukawa Electric Group (in session "Tue-Af-Pl3")

Development of superconductors for future large scale applications (in session "Tue-Af-Pl3")

Development of Test Device for Aluminum Metal Melting by Electromagnetic Induction Heating Using HTS Coils (in session "Thu-Af-Po4.07")

Development of the 100 T Pulsed Magnet at the Wuhan National High Magnetic Field Center (in session "Wed-Af-Or27")

Development of the Mineral Insulated High Temperature Superconducting Magnet for Future High Intensity Muon Beamline (in session "Wed-Af-Po3.01")

Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction (in session "Mon-Af-Or5")

Diffusion process of screening current in REBCO coil wound with copper-plated muti-filamentary REBCO tape (in session "Thu-Af-Po4.10")

Direct Control of Bearingless Permanent Magnet Slice Motor Based on Flux Linkage Observer Using Phase-locked Loop (in session "Thu-Af-Po4.05")

Direct simulation of interactive motion of magnetic particles in an oscillating magnetic field (in session "Wed-Af-Po3.07")

Double-Stator Permanent-Magnet Vernier Linear Machine With PMs Surface-Mounted on the Mover (in session "Wed-Af-Po3.05")

Driving and protecting superconducting hybrid magnets (in session "Mon-Af-Po1.12")

Dynamic Behaviour of Laminated Magnets with Solid Tension Bars (in session "Thu-Af-Po4.03")

Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method (in session "Mon-Af-Po1.06")

Dynamic Responses of Stacked coated conductor tapes Levitated above a Permanent Magnet Guideway (in session "Mon-Af-Po1.05")

Dynamic strain characteristics and responds in a LTS sextupole magnet during excitation and spontaneous quench (in session "Tue-Mo-Or15")

Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility (in session "Tue-Af-Po2.03")

E3SPreSSO: A Quench Protection System for High-Field High-Temperature Superconducting Magnets (in session "Wed-Af-Or24")

Eddy Current Loss Analysis of Surface Mount High Speed Permanent Magnet Motor Base on Multi-physics Fields (in session "Tue-Af-Po2.10")

Eddy currents analysis of dipole magnets of booster ring at HIAF project (in session "Thu-Af-Po4.03")

Effect of Background Magnetic Field on the Critical Current Degradation under Tensile Fatigue Loading for YBCO Tapes (in session "Thu-Af-Po4.08")

Effect of Multi-phase Winding on Surface Permanent-Magnet Machine with Low Space Harmonics for Electric Steering Gear (in session "Mon-Af-Po1.04")

Effect of strand diameter, magnetic field and injection length on the current entrance length of internal tin strand (in session "Thu-Mo-Or30")

Effect of striating coated conductors on reducing shielding-current-induced fields in pancake coils exposed to normal magnetic fields (in session "Tue-Af-Or18")

Effectiveness of Superconducting Fault Current Limiting Transformers in Power Systems (in session "Tue-Af-Po2.07")

Effects of metallic coatings on the thermal sensitivity of optical fiber sensors at cryogenic sensors (in session "Thu-Af-Po4.09")

Electrical analysis for 15MW REBCO designed wind turbine generators (in session "Thu-Af-Po4.06")

Electrical and Mechanical Interactions between Component Coils of Multi-Plex Pulsed Magnet Systems (in session "Tue-Af-Po2.04")

Electrical Field Generation by Hall Effect in High Field No-Insulation REBCO Pancake Coils (in session "Thu-Af-Po4.11")

Electro-mechanical measurements of mechanical lap joint of HTS STARS conductors (in session "Wed-Af-Or26")

Electromagnetic analysis of a superconducting bus-bar for SIS100 particle accelerator at FAIR (in session "Tue-Af-Po2.01")

Electromagnetic Analysis on Dual-Stator Switched Reluctance Motor (in session "Mon-Af-Po1.04")

Electromagnetic Design of HTS insert for NMR Magnet in Consideration of Screening Currents (in session "Thu-Mo-Or31")

Electromagnetic Performance Analysis of Less-rare-earth Stator-partitioned Multi-excitation Flux-switching Machine Considering Multi-operation Conditions (in session "Wed-Af-Po3.05")

Electromagnetic Performance Optimization Design of 5-phase BPMSM Based on Third Harmonic Injection (in session "Mon-Af-Po1.05")

Electromagnetic Performances and Noise Analysis of IPMSM according to the Control Method under Flux-Weakening Region (in session "Mon-Af-Po1.04")

Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils (in session "Tue-Mo-Or12")

Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC (in session "Mon-Af-Or7")

Embedded flexible Fe-Si-Al powder composite-film inductor for a Low Power DC-DC Converters (in session "Wed-Af-Po3.08")

EMC tests at the location of the DCCT and ADC calibration laboratory at FAIR project (in session "Mon-Af-Po1.12")

Energy and material efficient non-circular bore Bitter magnets (in session "Tue-Af-Po2.04")

Enhanced critical current densities in Nb3Sn superconducting strands prepared by bronze process (in session "Mon-Af-Po1.08")

Enhancement of crystallinity and critical current properties of fluorine-free MOD processed YBCO films by introduction of oxyhalide Ba2Cu3O4X2 (X = Cl, Br) (in session "Thu-Af-Po4.08")

Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method (in session "Thu-Af-Po4.08")

Enhancement of trapped magnetic field using a large-size REBCO bulk in a desktop type superconducting bulk magnet (in session "Mon-Af-Po1.07")

ENLARGED BORE 11.74T MAGNET FOR BRAIN RESEARCH APPLICATION (in session "Thu-Af-Po4.04")

Errors and optics study of a permanent magnet quadrupole system (in session "Thu-Mo-Or33")

Estimation method of optimal amount of overshooting current for temporally uniform magnetic field in a conduction-cooled ReBCO coil for MRI applications (in session "Thu-Af-Po4.04")

Estimation of Losses in the (RE)BCO Two-coil Insert of the NHMFL 32 T All-superconducting Magnet (in session "Wed-Af-Po3.12")

Estimation of Permanent Magnet Temperature using d-axis Current for IPMSM (in session "Mon-Af-Po1.04")

Evaluation of Electrical Characteristics for a Twisted Soldered-Stacked-Square (3S) HTS Wire with 1 mm Width (in session "Tue-Af-Po2.08")

Evaluation of thermal strain induced on components of Nb3Sn strand during cool down (in session "Mon-Af-Po1.08")

Evaluation of Voltage between Conductors for Resonance Phenomenon and Transient Response in JT-60SA Central Solenoid (in session "Tue-Af-Po2.03")

Evolution of AC loss, inter-strand resistance and mechanical properties in prototype EU DEMO TF conductors during 30,000 load cycles (in session "Wed-Mo-Or21")

Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance (in session "Thu-Af-Po4.07")

Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads (in session "Tue-Af-Po2.11")

Experimental and numerical analysis of quench characteristics on a HTS coil by fault disturbance in HTS generator (in session "Mon-Af-Po1.10")

Experimental and numerical investigation on losses in electrodynamic transients in a Nb3Sn prototype race-track coil (in session "Mon-Af-Po1.01")

Experimental and numerical investigations on the separation behavior of magnetic particles under an alternating gradient magnetic field (in session "Wed-Af-Po3.07")

Experimental Evaluation and Numerical Simulation of a HTS Linear Synchronous Motor for High Speed Railway (in session "Mon-Af-Or8")

Experimental evaluation of computer-aided quench detection for the KSTAR CS Coil (in session "Thu-Af-Po4.09")

Experimental Research of AC Ripple Losses in A High Temperature Superconducting Current Lead of A Magnet (in session "Wed-Af-Po3.12")

Experimental Study on AC Loss of a Quasi-isotropic Strand Fabricated by 2G HTS CCs in AC Magnetic Fields (in session "Tue-Af-Po2.08")

Experimental study on the effect of twisting on critical currents of Nb3Sn cable-in-conduit conductors (in session "Tue-Af-Po2.08")

Experimental Study on the Mechanical Stress Effect on the Degradation of High Temperature Superconducting Coils (in session "Tue-Af-Po2.09")

Experimental tests on a superconducting hybrid DC circuit breaker (in session "Tue-Af-Po2.07")

Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade (in session "Wed-Af-Or23")

Fabrication and Measurement of New Inflector for g-2 (in session "Thu-Af-Po4.01")

Fabrication and Testing of Bi-2223 Insert Coils for High Field NMR Magnets (in session "Mon-Af-Or5")

Fabrication of grain aligned Bi2223 thick films with high critical current properties (in session "Wed-Af-Po3.09")

Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC (in session "Mon-Af-Po1.01")

Fast cooling high field pulsed magnet with distributed mini cooling gaps (in session "Tue-Af-Po2.04")

Fast Cycling Superconducting Quadrupole (in session "Thu-Af-Po4.03")

Fast dipole magnet development (in session "Tue-Af-Po2.02")

Fast ramped dipole and DC quadrupoles design for the Beam Test Facility upgrade (in session "Tue-Af-Po2.02")

Fatigue failure analysis of a 60T pusled magnet at the WHMFC (in session "Mon-Mo-Or3")

FCC-hh Detector Magnet Cryostats and Cold Mass Suspension system (in session "Mon-Af-Po1.02")

FEA Model and Mechanical Analysis of the Nb3Sn 15 T Dipole Demonstrator (in session "Wed-Af-Po3.01")

Feasibility Study of MgB2 Cable for Pancake Coil of Energy Storage Device (in session "Mon-Af-Po1.06")

Feasibility Study on a Multi-pole Electro-magnet using Parallel Iron-core Structure (in session "Tue-Af-Po2.12")

Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet (in session "Thu-Af-Po4.10")

FEM Modelling Studies of 3 T Cryogen Free MRI Magnet based on MgB2 conductor (in session "Thu-Af-Po4.04")

Field Mapping System for a 230 MeV Superconducting Cyclotron (in session "Thu-Af-Po4.10")

Field Measurement of a Pulse Bending Magnet for a Beam-Switching System in the J-PARC (in session "Tue-Af-Po2.02")

Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade (in session "Tue-Af-Po2.01")

FIELD QUALITY FROM TOLERANCE ANALYSES IN EIGHT-PIECE QUADRUPOLE MAGNET* (in session "Tue-Af-Po2.02")

Field Stabilization Method of the Persistent Current Mode Coil Made of 2G HTS tape at 77 K (in session "Thu-Af-Po4.10")

Finite element analysis of strain distribution of REBCO coated conductors subjected to bending conditions experienced in high-field magnet applications (in session "Tue-Af-Po2.08")

Flow Analysis of Magnetic Fluid around a Permanent Magnet in Magnetic Fluid Damper (in session "Wed-Af-Po3.08")

Flux Characteristics Analysis of a Single-phase Tubular Switched Reluctance Linear Motor (in session "Mon-Af-Po1.04")

Flux Characteristics Analysis of Single-phase Tubular Permanent Magnet Linear Motor (in session "Wed-Af-Po3.05")

FLUX-REGULATION PERFORMANCE FOR RADIAL SUSPENSION FORECES OF BEARINGLESS FLUX-SWITCHING MOTOR (in session "Tue-Af-Po2.06")

Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement (in session "Mon-Af-Po1.01")

Frequency ramping effects on a dynamo-type HTS flux pump (in session "Tue-Af-Po2.11")

Friction-coefficient between the Ti6Al4V loading pole and the 316LN steel shims of the HL-LHC 11 T magnets (in session "Wed-Af-Po3.10")

Full Scale Conduction Cooled Superconducting Undulator Coils – Training, Stability and Thermal Behavior (in session "Thu-Af-Po4.03")

Further development of fusion enabling systems in Russia: suggestions on superconductors and current leads for DEMO-FNS facility. (in session "Thu-Af-Po4.02")

Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC (in session "Wed-Af-Or23")

Hall probe Calibration System Design for the Mu2e Solenoid Field Mapping System (in session "Thu-Af-Po4.10")

Hardware integration and performance analysis of a 10 kW HTS wind power generator (in session "Tue-Mo-Or14")

Heat treatment of MgB2 superconductors with different metal sheaths (in session "Wed-Af-Po3.09")

HEV Motor Comparison of IPMSM with Sintered Rare-Earth Mangnet and Bonded Dy Free Injection Magnet in the Same Size (in session "Thu-Af-Po4.05")

Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test (in session "Mon-Mo-Or1")

High definition 3D finite element analysis of low temperature Rutherford cable (in session "Tue-Af-Po2.09")

High Efficiency Permanent Magnet Linear Synchronous Motor (in session "Mon-Af-Po1.04")

High Field Accelerator Magnets: a Path to New Physics (in session "Thu-Af-Pl8")

High Field Coil Technology with Bi-2212 Round Wire (in session "Thu-Mo-Or31")

High Field, Large Aperture HTS Solenoid for Axion Dark Matter Search (in session "Wed-Af-Or25")

High Gradient Nb3Sn Quadrupole Demonstrator MKQXF Engineering Design (in session "Wed-Af-Po3.01")

High Magnetic Field Science and Technology (in session "Wed-Mo-Pl5")

High Modulus Reinforcement Materials (in session "Thu-Mo-Or32")

High performance coated conductors wire for magnet applications (in session "Tue-Af-Or17")

High Temperature Superconductors for Fusion Nuclear Science Spherical Tokamak (in session "Thu-Af-Po4.02")

High-field dipoles using superconducting cable-in-conduit (in session "Thu-Mo-Or28")

High-speed thermal imaging of quench propagation in HTS tapes using temperature-sensitive fluorescent films (in session "Wed-Mo-Pl6")

High-speed thermal imaging of quench propagation in HTS tapes using temperature-sensitive fluorescent films (in session "Tue-Mo-Or12")

High-speed thermal imaging of quench propagation in HTS tapes using temperature-sensitive fluorescent films (in session "Thu-Af-Po4.11")

High-temperature superconducting CORC® magnet cable and wire development and their application (in session "Wed-Mo-Or21")

HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2 (in session "Thu-Mo-Or31")

HTS high current cable for fusion application (in session "Wed-Mo-Pl6")

HTS Magnet with Smart Insulation Method (in session "Wed-Af-Po3.11")

HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype (in session "Tue-Af-Po2.05")

Hub- and Site-cooling of MRI magnets using a mobile cryogenic system (in session "Thu-Mo-Or29")

Hysteresis modeling of MgB2 using simplified Jiles-Atheron model (in session "Wed-Af-Po3.09")

Impact of stator ring width on output of a dynamo-type HTS flux pump (in session "Tue-Af-Po2.11")

Improved Design of Klystron Beam Focusing System with Permanent Magnets (in session "Thu-Af-Po4.07")

Improved Inner Stator-Magnet Moving-Iron Transversal-Flux Linear Oscillatory Machine with Magnets in Inner Stator Yoke (in session "Tue-Af-Po2.06")

Improved Modeling of Canted-Cosine-Theta Magnets (in session "Tue-Af-Po2.10")

Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair (in session "Wed-Af-Po3.04")

Improvement of Field Simulation Concept of Staggered Undulator with HTS YBCO Bulk (in session "Thu-Af-Po4.03")

Improvement of Reluctance Torque in Fault-Tolerant Permanent-Magnet Machines with Fractional-slot Concentrated-Windings (in session "Thu-Af-Po4.05")

In Memory of David Hawksworth (in session "Wed-Mo-Or20")

In-field Characterization of Local Ic and n-indices as a Function of Longitudinal Coordinate in a Long-length GdBCO Coated Conductor (in session "Tue-Af-Or17")

In-vacuum magnet technology inspired from semiconductor equipment (in session "Tue-Mo-Or14")

Indirectly cooled superconducting power supply for the CMD-3 thin solenoid (in session "Mon-Af-Po1.12")

Induced Voltage Characteristics by Back-Iron Effect for Electromagnetic Energy Harvester Using Magnetic Fluid (in session "Tue-Af-Po2.12")

Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider (in session "Tue-Af-Po2.01")

Influence of bolt positions and electrode structure in Yoroi-coil structure on stress distribution in an HTS coil winding (in session "Tue-Af-Po2.09")

Influence of E-J characteristics of coated conductors and field ramp-up rates on the shielding-current-induced fields of magnets (in session "Thu-Af-Po4.10")

Influence of field cycle and applied current on coated conductor magentization and decay for accelerator applications (in session "Wed-Mo-Or21")

Influence of high thermal conduction plastic having negative thermal expansion property on cooling performance in conduction cooled HTS coils (in session "Wed-Af-Po3.11")

Influence of local critical current degradation on quench characteristics of a ReBCO coil (in session "Mon-Af-Po1.10")

Influence of picosecond and femtosecond laser impact on magnetic and transport characteristics of the HTS tape (in session "Thu-Af-Po4.08")

Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables (in session "Mon-Af-Po1.08")

Influence of Soft Ferromagnetic Section on Trapped Field of High Temperature Superconducting Bulk Magnet used for linear motor application (in session "Thu-Af-Po4.10")

Influence of Stator Structure on the Static Characteristics in Axial Field Flux Switching Permanent Magnet Machine (in session "Thu-Af-Po4.05")

Influence of the modeling depth and voltage level on circulating currents in parallel conductors of a PMSM (in session "Wed-Af-Po3.12")

Injection control by neural network approach for Pulse-magnet of Taiwan Light Source (in session "Tue-Af-Po2.12")

Injection Kicker for HESR at FAIR using Semi-Conductor Switches (in session "Tue-Af-Po2.02")

Integrated Motor Propulsor Magnet Design with Hybrid Halbach Array for Torque Ripple Reduction (in session "Wed-Af-Po3.05")

Inter-layer Joint for the TF Coils of DEMO - Design and R&D (in session "Wed-Af-Po3.02")

Into the future with high temperature superconductors (in session "Wed-Mo-Pl6")

Introduction to MT26 in Vancouver (in session "Thu-Af-Pl9")

Investigation of Design Considerations for an Electromagnetic Induction Coilgun System (in session "Tue-Mo-Or11")

Investigation of epoxy impregnated Nb3Sn superconducting coil for high field applications (in session "Tue-Af-Po2.05")

Investigation of Materials and Welds for the Precompression Structure of the ITER Central Solenoid (in session "Wed-Af-Po3.10")

Investigation of SMPM Motor with Segmented Eccentric Magnet Pole (in session "Thu-Af-Po4.05")

Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil (in session "Thu-Af-Po4.04")

Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet. (in session "Wed-Mo-Or21")

Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires (in session "Tue-Af-Po2.09")

Investigation on Optimal Third-order Harmonic Shaping Method for Parallel Magnetized Surface-Mounted PM Machine (in session "Thu-Af-Po4.10")

Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique (in session "Mon-Af-Po1.10")

Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor (in session "Tue-Af-Po2.06")

Irreversible strain characteristics of technical RHQT Nb3Al superconductors (in session "Mon-Af-Po1.08")

Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results (in session "Mon-Af-Po1.09")

Lambertson Septum Magnet Design for the LCLS-II Beam Spreader at SLAC (in session "Tue-Af-Po2.02")

LAMINAR SUPERCONDUCTING WINDINGS (in session "Thu-Af-Po4.02")

Lead-free persistent mode joints between NbTi wires (in session "Mon-Af-Po1.09")

LEDET-ANSYS coupled modeling of transients in superconducting magnets (in session "Thu-Mo-Or33")

Lessons learnt by manufacturing 100 km of varied type of Cable-in-Conduit-Conductors (in session "Tue-Af-Po2.08")

Levitation and guidance forces of CC-tape stacks (in session "Mon-Af-Po1.05")

Levitation Performance of Bulk YBCO and GdBCO Under a Low-Pressure Condition (in session "Mon-Af-Po1.05")

Levitation separation of precious metals utilizing magneto-Archimedes effect in high gradient magnetic fields (in session "Wed-Af-Po3.07")

Liquid nitrogen level detection method for the safe operation of onboard cryostats of high-temperature superconducting maglev vehicles under vibration condition (in session "Mon-Af-Po1.11")

Locating Electrical Faults in Superconducting Accelerator Magnets (in session "Thu-Af-Po4.11")

Low loss NbTi Superconducting Wires for the SIS100 Main Magnets made by Luvata (in session "Mon-Af-Po1.08")

Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor (in session "Tue-Af-Po2.06")

Low temperature Hall probe calibration system for the TPS cryogenic permanent magnet undulator (in session "Thu-Af-Po4.03")

LOW VIBRATION VAPOUR SHIELDED CRYOSTATS FOR WIDE BORE HIGH FIELD MAGNETS (in session "Mon-Af-Po1.11")

LTS-HTS Hybrid Dipole Magnet Quench Protection System (in session "Wed-Af-Or24")

Magnet quench protection of the FCC-hh 16 T block-type dipole magnet by means of quench absorption coils (in session "Tue-Mo-Or15")

Magnet System for the BabyMIND Neutrino Detector at J-PARC (in session "Mon-Af-Po1.02")

Magnetic and mechanical design of a 16 T common coil dipole for FCC (in session "Mon-Af-Or6")

Magnetic Design Update of Large Aperture Beam Separation Dipole for the HL-LHC Upgrade (in session "Tue-Af-Po2.01")

Magnetic field and characteristic analysis of the superconducting fault current limiter for DC applications (in session "Tue-Af-Po2.07")

Magnetic field distribution prediction of a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion (in session "Thu-Af-Po4.06")

Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm (in session "Wed-Mo-Or20")

Magnetic Field Measurement and Analysis of the CSNS/RCS Quadrupole Magnets (in session "Thu-Af-Po4.10")

Magnetic field measurements of full scale conduction cooled superconducting undulator coils (in session "Tue-Mo-O10")

Magnetic Field Stability Improvement of HTS-MRI Magnet under Power Supply Driven Operation with a Micro Current Trimming Control (in session "Thu-Af-Po4.04")

Magnetic measurements of the NICA booster superconducting magnets (in session "Tue-Af-Po2.01")

Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC (in session "Mon-Af-Po1.01")

Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC (in session "Mon-Af-Po1.01")

Magnetic Septa for the SIS100 Accelerator at FAIR (in session "Tue-Af-Po2.02")

Magnetization loss in REBCO Roebel cables with varying strand numbers (in session "Wed-Af-Po3.12")

Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields (in session "Tue-Af-Or18")

Manufacture and tests of a 1 MJ HTS Magnet for a SMES-FCL (in session "Mon-Af-Po1.06")

Manufacture of the ITER Central Solenoid components (in session "Tue-Mo-Or13")

Manufacturing and Qualification Test of ITER Busbar Joint (in session "Mon-Af-Po1.09")

Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System (in session "Wed-Mo-Or20")

Measurement and Analysis of Amplitude Magnetic Permeability and Magnetic Losses of Silicon Steel Sheet (in session "Tue-Af-Po2.12")

Measurement and Torque Calculation of Magnetic Spur Gear Based on Quasi 3-D Analytical Method (in session "Wed-Af-Po3.08")

Measurement campaign on critical current for MgB2 wires and tapes under a magnetic field up to 8T (in session "Wed-Af-Po3.09")

Measurement of AC Losses of HTS Conductors on Round Core with Filamentary Strands (in session "Wed-Af-Po3.12")

Measurement of Magnetic Materials at Room And Cryogenic Temperature for Their Application to Superconducting Wind Generators (in session "Tue-Mo-Or14")

Measurement of overall thermal resistance and contact thermal resistance in conduction cooled HTS magnets (in session "Wed-Af-Po3.11")

Measurement of persistent current Gd123 coil for superconducting joint fabricated by CJMB method (in session "Thu-Mo-Or32")

Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models (in session "Mon-Af-Or7")

Measurements of the Effective Thermal Conductivity of the ITER TF Coil Case Cooling System (in session "Tue-Af-Po2.03")

Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training (in session "Mon-Af-Po1.01")

Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF (in session "Mon-Mo-Or3")

Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade (in session "Tue-Af-Po2.09")

Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source (in session "Mon-Af-Po1.01")

Mechanical properties of aged 316LN butt-welding joint at cryogenic temperature for CFETR CS model coil (in session "Wed-Af-Po3.10")

Mechanical properties of bulk MgB2 superconductors processed by spark plasma sintering at various temperatures (in session "Tue-Af-Po2.09")

Mechanical properties of ITER CICC jacket in China (in session "Wed-Af-Po3.10")

Mechanical Structure for the PSI Canted-Cosine-Theta (CCT) Magnet Program (in session "Wed-Af-Po3.11")

Mechanical–electric Model for Multifilament Composite Superconducting Strands (in session "Mon-Mo-Or3")

Mechanisms to enhance stability, post-quench recovery and availability in non-insulated REBCO magnets (in session "Mon-Af-Or9")

Meeting Divergent Expectations: Superconductors between Industrial Applications & Cutting-Edge Science (in session "Tue-Af-Pl3")

Methodology of Incorporating Mechanical and Electromagnetic Characteristics Analysis for Separated Pole-Piece Type Ferrite Magnet Motor (in session "Thu-Af-Po4.05")

Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor. (in session "Tue-Af-Po2.11")

MgB2 cables from wires made PIT and IMD process. (in session "Thu-Mo-Or30")

MgB2 superconductive short winding joints: mathematical prevision of current behaviours and experimental validations (in session "Mon-Af-Po1.09")

MIFI (Magnet Infrastructure Facilities for Iter) : activities overview (in session "Wed-Af-Po3.02")

Minimization design of torque ripple for bearingless synchronous reluctance motor (in session "Tue-Af-Po2.06")

Modeling and Analysis of Parasitic Capacitance of High-Frequency High-Voltage Transformer Using Finite-Element Method (in session "Mon-Af-Po1.06")

Modeling of AC losses in the CS and TF conductors for the ITER Project (in session "Wed-Af-Po3.12")

Modeling of magnetization loss in HTS tape exposed to all magnetic field direction (in session "Wed-Af-Po3.12")

Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field (in session "Mon-Af-Po1.12")

Modified Halbach Magnets in Medical Science Applications (in session "Wed-Af-Po3.04")

Moduling Axial-flux Compensated Pulsed Alternator (in session "Wed-Af-Po3.06")

MRI scanner development in Russia (in session "Wed-Mo-Or20")

MT25 Conference Data (in session "Thu-Af-Pl9")

Mu2e Solenoid Field Mapping System Design (in session "Thu-Af-Po4.10")

Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole. (in session "Mon-Mo-Or3")

Multiphysics FEA Led Design of Bi-2212 Round Wire Prototype Coils (in session "Thu-Mo-Or33")

Nb3Sn strand designs and heat treatments for high field magnet applications (in session "Thu-Mo-Or30")

Nb-rod-method Cu-Nb/Nb3Sn wires for practical React-and-Wind applications (in session "Mon-Af-Po1.08")

New Bridge Temperature Sensor for Superconducting Magnets and other Cryogenic Applications (in session "Thu-Af-Po4.11")

New design of a pulse magnet for the J-PARC RCS injection shift bump magnet (in session "Tue-Mo-O10")

New inspection method of joint resistance at room temperature for ITER TF Coil (in session "Wed-Af-Po3.02")

New method for magnet protection systems based on a direct current derivative sensor (in session "Thu-Af-Po4.09")

Nonlinear multiscale structural analysis of a superconducting coil and support structure for the helical fusion reactor (in session "Thu-Af-Po4.02")

Nonlinear Sensorless Control including Zero Speed of Permanent Magnet Synchronous Motor Drives (in session "Thu-Af-Po4.05")

Novel 4/4 Stator/Rotor Single-Phase Asymmetric Stator-Pole Doubly Salient Machine with Permanent Magnets on Stator Teeth (in session "Tue-Af-Po2.06")

Novel Cavity Feature On Dipole Magnet Pole Face Improves Field Homogeneity While Reducing Coil Complexity (in session "Thu-Af-Po4.10")

Novel Control Strategy of Wave Energy Converter using Linear Permanent Magnet Synchronous Generator (in session "Thu-Af-Po4.06")

Novel Heteropolar Hybrid Radial Magnetic Bearing with Double-Layer Stator for Flywheel Energy Storage System (in session "Tue-Af-Po2.06")

Novel U-shaped Structure Switched Reluctance Machine With a Module Outer Rotor (in session "Wed-Af-Po3.05")

Numeric Analysis of the Rib geometry effect on multipole magnetic fields (in session "Thu-Af-Po4.10")

Numerical Analysis and Design of SPM Type Variable Flux Memory Motor Considering Magnetization and Demagnetization Characteristic of Permanent Magnet (in session "Mon-Af-Po1.04")

Numerical Analysis of Variable Flux Memory Motor Considering Characteristics of Permanent Magent Load-Line (in session "Wed-Af-Po3.05")

Numerical and Experimental Evaluations of the Quench Detection Performance of NbTi/YBCO Hybrid Tape (in session "Thu-Af-Po4.09")

Numerical modelling of iron-pnictide bulk superconductor magnetization (in session "Thu-Af-Po4.10")

Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF (in session "Thu-Af-Po4.02")

Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization (in session "Tue-Af-Po2.09")

Numerical Simulation of Thermal Behavior In a No-insulation Toroidal Magnet (in session "Thu-Af-Po4.02")

Numerical Study on Electro-thermal Characteristics of Core Cable Consisted Of YBCO Coated Conductor (in session "Tue-Af-Po2.08")

ON A FULL 3D THERMAL STRUCTURAL AND HYDRAULIC FINITE ELEMENT MODEL OF THE JT-60SA TOROIDAL FIELD COILS (in session "Thu-Af-Po4.02")

Ongoing efforts at internal-tin Nb3Sn strand with higher Jc and lower Qh for fusion application (in session "Mon-Af-Po1.08")

Open Material Property Library With Native Simulation Tool Integrations (OpMaST) (in session "Thu-Mo-Or32")

Operating characteristics of Arc-induction type DC circuit breaker (in session "Tue-Af-Po2.12")

Operating Characteristics of Underwater Wireless Power Transfer for Maritime Applications Using Strong Copper Resonance Coupling Coils (in session "Tue-Af-Po2.12")

Operation of the helium cryogenic system for the hybrid superconducting outsert at CHMFL (in session "Mon-Af-Po1.11")

Operational experience with the combined solenoid/dipole magnet system of the COMPASS Experiment at CERN (in session "Mon-Af-Po1.02")

Operational Experience with the MICE Spectrometer Solenoid System (in session "Wed-Af-Or25")

Optimal Design Methodology of Multi-Width HTS Magnet (in session "Mon-Af-Po1.03")

Optimal Design of the LTS Magnet employing Genetic Algorithm for EMPS (in session "Tue-Af-Po2.10")

Optimal desing of PMa-synRM for electric propulsion system considering wide operation range and demagnetization (in session "Thu-Af-Po4.05")

Optimising rotor speed and design for an externally-mounted HTS dynamo (in session "Tue-Af-Po2.11")

Optimization Design and Forecast Direct Control System Research on Bearingless Permanent Magnet Synchronous Generator (in session "Thu-Af-Po4.06")

Optimization Design of a Permanent Magnetic Actuator for 126kV Vacuum Circuit Breaker (in session "Mon-Af-Po1.07")

Optimization Design of Bearingless Synchronous Reluctance Motor (in session "Tue-Af-Po2.06")

Optimization of 2G HTS Current Leads Working at External Magnetic Field (in session "Mon-Af-Po1.09")

Optimization of structural performance of the toroidal field coil system of a tokamak (in session "Thu-Af-Po4.02")

Optimization of the ITER Pre-Compression Ring Test Rig Flange (in session "Wed-Af-Po3.02")

Optimization of the Pole Piece in Coaxial Magnetic Gears for Transfer Torque Ripple Improvement (in session "Mon-Af-Po1.04")

Optimization of the Radiation Resistant Quadrupole Magnets for the SIS-100 Accelerator of the FAIR Project (in session "Tue-Af-Po2.02")

OPTIMIZATION, DESIGN AND OPERATION ASSESSMENT OF A MULTIPURPOSE DETECTOR FOR NICA COLLIDER (in session "Mon-Af-Po1.02")

Overall Status of the ITER Project (in session "Mon-Mo-Pl2")

Overview of JT-60SA HTS current lead manufacture and testing (in session "Mon-Af-Po1.09")

Overview of Recent Progress in No-Insulation REBCO Magnet Research (in session "Mon-Af-Or9")

Overview of the Present Progress on the Superconducting Magnet System of CFETR-PhaseII (in session "Wed-Af-Or22")

PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE (in session "Thu-Af-Po4.02")

Parametric Study of Block-coil Dipoles Using Graded Conductors (in session "Wed-Af-Po3.01")

Partial isolation quench protection method for YBCO SMES magnet (in session "Thu-Af-Po4.09")

Particle Reinforced Cu Matrix Conductors for High Field Pulsed Magnets (in session "Wed-Af-Po3.10")

PENeLOPE: testing a one-of-a-kind neutron storage magnet (in session "Wed-Af-Or25")

Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL (in session "Tue-Af-Po2.07")

Performance Degradation of YBCO Tapes after Suffering Lightning Impulse Current (in session "Thu-Af-Po4.08")

Performance Evaluation of a Novel Axial Flux Claw Pole Machine with Soft Magnetic Composite Cores (in session "Tue-Af-Po2.06")

Performance of a HTS Persistent Current System for REBCO pancake coil (in session "Mon-Af-Po1.09")

Performance of the ITER CS joints (in session "Wed-Af-Or26")

Performance of the quench protection system of the first LARP-CERN quadrupole magnet models (in session "Wed-Af-Or24")

Performance of two-ply four-filaments Gd123 tape coil (in session "Thu-Mo-Or31")

Performance simulation of a bias-flux superconducting fault current limiter (SFCL) based on MATLAB/SIMULINK (in session "Tue-Af-Po2.07")

Performance test of 1.5 T cryogen free orthopedic MRI magnet (in session "Thu-Af-Po4.04")

Permanent Magnet Dipoles For the ESRF Upgrade (in session "Wed-Mo-Or19")

Pinning Force and critical properties in YBa2Cu3O7-δ (in session "Thu-Af-Po4.08")

Polar transformed subdomain modeling for primary-segmented permanent magnet linear synchronous machine applied in tracked inspection robots (in session "Thu-Af-Po4.07")

Prediction and analysis of quench propagation test results in the ITER TF Insert Coil using the 4C code (in session "Tue-Mo-Or12")

Preliminary design of the FAIR Super FRS superferric branched dipoles (in session "Tue-Af-Po2.01")

Present status of Bi-2212 conductor technology (in session "Thu-Mo-Or30")

Principle and realization of an electromagnetic pulse welding system with a dual-stage coil (in session "Thu-Af-Po4.07")

Production of Aluminum Stabilized Superconducting Cable for the Mu2e Transport Solenoid (in session "Mon-Af-Po1.08")

Progress of ITER Feeder System Electrical Insulation Qualification (in session "Wed-Af-Po3.10")

Progress of ITER TF Coil Case fabrication in Japan (in session "Wed-Af-Po3.02")

Progress of the JT-60 SA Toroidal Field coils tests in the Cold Test Facility (in session "Mon-Af-Or4")

Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet (in session "Thu-Mo-Or32")

Progresses in cable in conduit for fusion magnets: from ITER to DEMO (in session "Wed-Af-Or22")

Progresses in Mg11B2 intermediate superconductors initiatives in India (in session "Wed-Af-Po3.09")

Proposed Commutation Method for Performance Improvement of Brushless DC Motor (in session "Mon-Af-Po1.04")

Prototype Design of the Dipole for EMuS at CSNS (in session "Thu-Af-Po4.01")

Pulsed field stability and AC loss of ITER NbTi PF joints by detailed quantitative modeling (in session "Wed-Af-Or26")

Quadrupole design for the 2 GeV upgrade of the CERN PS-Booster (in session "Tue-Af-Po2.02")

Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements. (in session "Thu-Af-Po4.09")

Qualification Program of Joints for ITER Coils (in session "Wed-Af-Or26")

Quality and Stability Improvement of DC Power Systems in All Electric Ship Using SMES/Battery (in session "Wed-Af-Po3.07")

Quench (Thermal Runaway) Protection of Bi2223 (DI-BSCCO) Magnets (in session "Tue-Mo-Or15")

Quench and Recovery Characteristics of MgB2 Coil with Various Protection Schemes (in session "Thu-Af-Po4.09")

Quench and Recovery Characteristics of Racetrack Coil for Large-capacity Wind Generator (in session "Mon-Af-Po1.10")

Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment (in session "Mon-Af-Po1.10")

Quench Behaviour of Bi2Sr2CaCu2O8+x insert coils for high field magnets (in session "Mon-Af-Po1.03")

Quench Behaviour of the HL-LHC Twin Aperture Orbit Correctors (in session "Tue-Mo-Or12")

Quench Detection Performance of the Magnet Safety System for the inductively coupled KATRIN Source Magnets (in session "Thu-Af-Po4.09")

Quench detection via Rayleigh backscattering interrogated optical fibers (in session "Tue-Mo-Or15")

Quench energy in ITER conductors for different magnetic field perturbations with JackPot and THEA combined models (in session "Wed-Af-Po3.11")

Quench Location in the LARP MQXFS1 prototype (in session "Mon-Af-Po1.01")

Quench propagation and degradation limits of pre-strained HTS tapes with a spot heater (in session "Tue-Mo-Or12")

Quench propagation measurements on 2 km MgB2 coil up to 4 T. (in session "Mon-Af-Po1.10")

Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches (in session "Mon-Af-Po1.10")

Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade (in session "Tue-Af-Po2.01")

Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source (in session "Thu-Af-Po4.09")

Quench protection of an MgB2-based MDS magnet system (in session "Thu-Af-Po4.09")

Quench protection of HTS coil composed of multiple pancake-coils by changing current distribution in pancake-coils (in session "Wed-Af-Or24")

Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC (in session "Mon-Af-Po1.01")

Quench Protection Solutions for Magnets fabricated with HTS Conductors (in session "Wed-Af-Or24")

Quench simulation of a DEMO TF coil using a quasi-3D coupling tool (in session "Tue-Af-Po2.03")

Racetrack-shaped large single pancake coils wound with 1 km-long REBCO-coated conductors (in session "Wed-Af-Po3.03")

Ramping Injector Power Supply for Dipole Magnets (in session "Mon-Af-Po1.12")

Real-time functional diagnostics of superconducting magnets using acoustic techniques (in session "Mon-Mo-Or3")

Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key (in session "Wed-Af-Po3.08")

Recent Magnet and Material Development at the Pulsed Field Facility – NHMFL (in session "Wed-Af-Or27")

Recent progress in development of high performance CICCs for CFETR magnet (in session "Tue-Af-Po2.08")

Recent Progress of Application-Oriented DI-BSCCO Wires (in session "Thu-Mo-Or30")

Recommissioning and upgrades to the FNAL muon g-2 magnets (in session "Tue-Af-Or16")

Reduction effect of irregular magnetic field due to screening-current in copper-plated mutifilamentary REBCO tape (in session "Thu-Af-Po4.10")

Reduction of the screening current field in HTS coils wound by using Soldering-Stacked-Square (3S) REBCO wires (in session "Thu-Af-Po4.10")

Refinement and application of a generic CFD toolkit covering the heat flows in combined solid–liquid systems to investigate thermal quench limits of superconducting magnets (in session "Tue-Af-Po2.10")

Remarkable difference in thermal runaway behavior between a Ni-alloy reinforced Bi-2223 coil and a REBCO coil (in session "Mon-Af-Po1.10")

Repair method of locally defective or damaged coated conductor using the superconducting patch (in session "Thu-Af-Po4.08")

Research of a new DC breaker based on the electromagnetic forming technology for Battery power supply of long pulsed magnet (in session "Mon-Af-Po1.12")

Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field (in session "Mon-Af-Po1.12")

Research on a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion (in session "Thu-Af-Po4.06")

Research on an Asymmetric-primary Hybrid-excitation Maglev Axis-flux Generator for the Vertical Axis wind Turbine (in session "Thu-Af-Po4.06")

Research on control system of a novel coil assisted reluctance motor (in session "Tue-Af-Po2.06")

Research on demagnetization-resistant structure of synchronous motor performance using Nd-permanent magnets reduced heavy rare earth metals (in session "Thu-Af-Po4.05")

Research on MgB2 armature windings in fully superconducting AC machine (in session "Wed-Af-Po3.06")

Research on operation strategy of the pulse generator power system energizing the out coil of the 100 Tesla magnet (in session "Mon-Af-Po1.12")

Research on Temperature Rise and Temperature Control for Giant Magnetostrictive Transducer (in session "Tue-Af-Po2.10")

Research on the linear tubular motor with multilayer flux-concentrating permanent magnets for direct-drive ocean wave conversion (in session "Thu-Af-Po4.06")

Resistance of splices in the LHC Main Superconducting Magnet Circuits at 1.9 K (in session "Mon-Af-Po1.09")

Robust REBCO coated conductor with meatal stitching stabilizer (in session "Wed-Af-Po3.11")

Role of electrostatic charges in the calculation and measurement of AC losses in superconducting coils. (in session "Tue-Af-Or18")

Rotor Losses Research of Brushless Doubly-fed Machine with Hybrid Rotor (in session "Wed-Af-Po3.12")

Rotor Structure Design and Optimization of MW-class Brushless Doubly Fed Generator for Offshore Wind Turbine (in session "Wed-Af-Po3.06")

Sector DC Dipoles Design for the Beam Test Facility Upgrade (in session "Tue-Af-Po2.02")

Self-heating effect in HTS coils (in session "Mon-Af-Or9")

Self-monitoring, SMART REBCO coated conductors (in session "Thu-Af-Po4.09")

Sensorless Control of Bearingless Permanent Magnet Synchronous Motor Based on MRAS (in session "Thu-Af-Po4.05")

Series Production of ITER TF Coil Winding Pack in Japan (in session "Tue-Mo-Or13")

Shielding Current Analysis in High-Temperature Superconducting Film and Its Application (in session "Tue-Af-Po2.10")

Simulation and Experiment of HTS Coils with a New Structure as Inductors in STRETCH Meat Grinder Circuit (in session "Tue-Af-Po2.12")

Simulation of an Octupole Scanning Magnet for Spot Scanning in Proton Therapy (in session "Wed-Af-Po3.04")

Simulation of Screening Current Reduction Effect of External AC Magnetic Field on Multi-turn REBCO Pancake Coils (in session "Thu-Af-Po4.10")

Simulation of the delamination behaviors in the 2G HTS tape with consideration of thermal stress (in session "Thu-Af-Po4.08")

Simulation of the ITER Toroidal Field Coil Case welding distortion using Finite Element Method (in session "Tue-Af-Po2.09")

Simulation of Thomson Parabola spectrometer for charged particle diagnostics in the PETAL+ project (in session "Wed-Af-Po3.08")

Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization (in session "Tue-Af-Po2.09")

Simulations, measurements and sorting of THOMX ring bending magnets. (in session "Tue-Af-Po2.02")

Single-strand excitation for examining current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla (in session "Mon-Af-Po1.08")

Sirius - Details of the new 3.2 T Permanent Magnet Superbend (in session "Tue-Af-Po2.02")

Size effect on the strength of Cu-Ag microcomposites by accumulative drawing and bundling process (in session "Wed-Af-Po3.10")

Soft Sensing Modeling of Rotor Displacements Based on Continuous Hidden Markov Model (in session "Mon-Af-Po1.05")

Stability and Normal Zone Propagation in a conduction cooled racetrack coil wound of YBCO Coated Conductor Tape – FEM Modeling (in session "Wed-Af-Po3.11")

Stability simulation of a new ring-shaped YBCO coated conductor sheets magnet (in session "Wed-Af-Po3.03")

Stacked tape HTS conductors for Fusion Magnets (in session "Tue-Af-Po2.08")

Starting Control Strategy of Bearingless Permanent Magnet Synchronous Motor (in session "Thu-Af-Po4.05")

Static and transient magnetic design of a Septum magnet for ThomX accelerator (in session "Tue-Af-Po2.04")

Status and realization of an high efficiency transport beamline for laser-driven ion beams (in session "Wed-Mo-Or19")

STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN (in session "Thu-Af-Po4.02")

Status of Design and Manufacturing of PENELOPE neutron trap (in session "Mon-Af-Po1.02")

Status of Magnet System for CSNS RCS (in session "Tue-Mo-O10")

Status of manufacturing and testing of superconducting magnets for NICA and FAIR projects (in session "Tue-Af-Or16")

Status of the 16 T dipole development programme for a future hadron collider (in session "Thu-Mo-Or28")

Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan (in session "Mon-Mo-Or1")

Status of the ITER In-vessel Coils System and Progress on the Qualification of the In-Vessel Coil Conductor (in session "Tue-Mo-Or13")

Stealth superconducting magnet technology for collider IR and injector requirements (in session "Wed-Af-Po3.01")

STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits (in session "Tue-Af-Po2.10")

Step-current method for improving energy storage density of superconducting magnet (in session "Mon-Af-Po1.06")

Strain characteristics of Ic in brass laminated GdBCO CC tapes under various temperature and magnetic field conditions (in session "Tue-Af-Po2.09")

Strain response of superconducting magnets during excitation and quench training based on FBG and cryogenic strain gauge measurements (in session "Tue-Af-Po2.09")

Strand level modeling on AC loss and current distribution of prototype EU DEMO TF conductors (in session "Wed-Af-Po3.11")

Stress Analysis of Induction Motor Core Considering Anisotropic Magnetic and Magnetostrictive Properties (in session "Thu-Af-Po4.05")

Stress-Strain Analysis in a 10 T non-Insulated GdBCO HTS Coil for the 25 T All-superconducting NMR Magnet (in session "Wed-Af-Po3.03")

Strong flux pinning caused by phase distribution characteristics in (Ba, K)Fe2As2 films (in session "Wed-Af-Po3.09")

Strong, round and rectangular HTS wires based on the Bi2212 superconductor (in session "Wed-Af-Po3.09")

Structural Behavior of KSTAR CS Magnet during Plasma Operation (in session "Mon-Mo-Or3")

Structural Design Methodology of BLDC Motor Considering Response Time of Phase Current (in session "Thu-Af-Po4.05")

Structural optimization methodology of the 2-D inner-leg cross-section for the Toroidal Field Coils of fusion reactors (in session "Wed-Af-Po3.10")

Study of a Sextupole Round Coil Superferric Magnet (in session "Thu-Af-Po4.01")

Study of bending behavior in Nb3Sn strands (in session "Tue-Af-Po2.09")

Study of the Hotspot Temperature during Quench in the Non-Planar Coils of W7-X (in session "Tue-Af-Po2.03")

Study on Counter-rotating Dual Rotors Radial Permanent Magnet Motor for underwater vehicle Propulsion (in session "Mon-Af-Or8")

Study on Design of a Novel Magnetic Field Modulation Linear Primary Permanent Magnet Synchronous Motor (in session "Thu-Af-Po4.05")

Study on Electromagnetic Force Distribution and Copper Fatigue Performance in Electromagnetic Strengthening with Axial Compression (in session "Wed-Af-Po3.08")

Study on Electromagnetic Force Distribution and Material Forming Performance in Electromagnetic Tube Expansion with Concave Coils (in session "Tue-Mo-Or11")

Study on fault-tolerant control of open-winding brushless doubly-fed wind power generator (in session "Wed-Af-Po3.06")

Study on the Quench Protection of the HTS magnet with iron core for a 1MW DC Induction Heater (in session "Thu-Af-Po4.09")

Study on the Transport Current Properties for the 2G HTS Wire Under the Spray Cooling Method (in session "Thu-Af-Po4.08")

Study on Vibration Characteristics of Permanent Magnet Synchronous Motor with Demagnetization of Permanent-magents (in session "Thu-Af-Po4.05")

Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade (in session "Wed-Af-Or23")

Superconducting Coil system R&D for a 230 MeV Superconducting Cyclotron (in session "Wed-Af-Po3.04")

Superconducting Detector Magnets for CERN’s Future Circular Collider (in session "Wed-Af-Or25")

Superconducting Feeder System For ITER Central Solenoid Module Final Test Facility (in session "Tue-Af-Po2.03")

Superconducting HTS joints for connecting strong Bi2212 wires (in session "Thu-Mo-Or32")

Superconducting joints made using internal Mg diffusion (IMD)-processed MgB2 wires (in session "Mon-Af-Po1.09")

Superconducting Magnets for High Performance ECR Ion Sources (in session "Tue-Af-Or16")

Superconducting properties and microstructure of high performance Nb3Al wires fabricated by RHQT and mechanically alloyed methods (in session "Mon-Af-Po1.08")

Superconducting properties of 2G HTS wires with artificial pinning centres fabricated using production scale PLD equipment (in session "Tue-Af-Or17")

Superconducting properties of Nb3Al wires prepared with rapid heating, quenching and transformation method (in session "Mon-Af-Po1.08")

Superconducting properties of Prototype Pancake Coil using MgB2 Cable (in session "Mon-Af-Po1.06")

Superconducting properties of YBaCuO bulk ceramics using melt process (in session "Wed-Af-Po3.10")

Superconducting Undulators Toward Commercial Products (in session "Tue-Mo-O10")

Suppression of Flux Creep in HTS Coil by Applying Low AC Magnetic Field (in session "Wed-Af-Po3.12")

SwissFEL Beam Dump Dipole Spectrometer Simplistic Design Backed by Accurate Magnetic Field Measurements (in session "Tue-Af-Po2.02")

SynRM Rib optimal Design method for High-Power Density (in session "Mon-Af-Po1.04")

Tail Component Qualification for the EU ITER PF Coils (in session "Tue-Af-Po2.09")

Tcs Measurement Result of ITER Toroidal Field Insert Coil Tested in 2016 (in session "Tue-Mo-Or13")

Technical Visits, Banquet and Closing of MT25 (in session "Thu-Af-Pl9")

Temperature dependent behaviour of a barrel-type HTS dynamo (in session "Thu-Mo-Or29")

Temperature evolution in ITER CSU2 coil module during 15MA plasma scenario (in session "Wed-Af-Po3.11")

Temperature Evolution of Pinning Force in GdBaCuO Coated Conductors with Artificial Pinning Centers (in session "Thu-Af-Po4.08")

Test of a Prototype Inductive Superconducting Fault Current Limiter Using No-insulation Coil (in session "Tue-Af-Po2.07")

Test of ITER-TF joint samples with NIFS test facilities (in session "Tue-Mo-Or13")

Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation (in session "Wed-Af-Or23")

Test results of the first superconducting undulator prototype at the SSRF (in session "Thu-Af-Po4.03")

Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade (in session "Wed-Af-Or23")

Test Winding of a 1-T Class Force-Balanced Coils Using High Temperature Superconducting Tapes (in session "Mon-Af-Po1.06")

Testing of the superconducting magnets for the SIS100 (in session "Thu-Af-Po4.03")

Tests in Standalone Mode of the EuCARD 5.4-T REBCO Dipole Magnet. (in session "Wed-Af-Po3.03")

The angular and Field Dependence of the Critical Current of commercial YBCO coated conductors (in session "Thu-Af-Po4.08")

The Design of Magnetic Needles for Improving Magnetic Field Measurement System (in session "Tue-Mo-O10")

The effect of compositional ratio of SmBCO coated conductor on the superconducting properties. (in session "Thu-Af-Po4.08")

The FuSuMaTech initiative: Synergy with Industry and Impact on the Future Superconducting Magnet Technology (in session "Thu-Af-Po4.04")

The implement of control and date acquisition system for the 100 T pulsed high magnetic field facility at WHMFC (in session "Mon-Af-Po1.12")

The Investigation of Cogging Torque Reduction Technologies (in session "Thu-Af-Po4.05")

The latest observations from results of comprehensive computer simulation of the NHMFL all-superconducting 32T magnet quench tests (in session "Mon-Af-Po1.10")

The limits of space radiation magnetic shielding (in session "Tue-Mo-Or11")

The Mu2e Solenoid Cold Mass Position Monitor System (in session "Thu-Af-Po4.11")

The Number of Magnet Poles Decision Method of Magnetic Gear for Torque Ripple Reduction (in session "Wed-Af-Po3.07")

The PF1 coil electrical joint test results (in session "Wed-Af-Po3.02")

The Scanning Magnets for Proton Therapy Designed by SINAP (in session "Tue-Af-Po2.05")

The Study of Pulsed Strong Magnetic Field Measurement System based on Distributed Magnetic Field Sensors (in session "Thu-Mo-Or29")

The trapped magnetic field of a joint-less second-generation high temperature superconducting coil. (in session "Thu-Af-Po4.04")

The US Magnet Development Program for High Field Accelerator Magnet R&D (in session "Thu-Mo-Or28")

Thermal and electric analysis of the flux pump to apply conduction cooled superconducting magnet (in session "Tue-Af-Po2.11")

Thermal and Electromagnetic Simulation of Multi-stacked No-Insulation REBCO Pancake Coils on Normal-state Transition by PEEC model (in session "Wed-Af-Po3.11")

Thermal characteristics of a prototype HTS quadrupole magnet for In-flight fragment separator of RISP (in session "Mon-Af-Po1.11")

Thermal limit curve calculation for squirrel cage induction motor based thermal equivalent circuit (in session "Thu-Af-Po4.05")

Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials (in session "Wed-Af-Po3.11")

Thermo-hydraulic analysis of The KSTAR PF cryogenic loop using SUPERMAGNET CODE (in session "Thu-Af-Po4.02")

Thermo-Magnetic Mechanical stability study of the MICE Spectrometer Solenoids (in session "Tue-Af-Po2.10")

Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO (in session "Thu-Af-Po4.02")

Thermomechanical behavior of the HL-LHC 11 tesla Nb3Sn magnet coil constituents during reaction heat treatment (in session "Wed-Af-Po3.10")

Threshold value analysis of YBCO tapes under transient over-current impulse (in session "Thu-Af-Po4.08")

Torque Control of IPMSM considering actual controller and driving condition (in session "Thu-Af-Po4.05")

Torque Maximization Method of Radial Magnetized Surface-Mounted PM Machine Having Sinusoidal Shaped Pole (in session "Thu-Af-Po4.10")

Torque Ripple Improvement for Ferrite-Assisted Synchronous Reluctance Motors by Using Asymmetric Flux-barrier Arrangement (in session "Wed-Af-Po3.05")

Torque Ripple Minimization in a PM-assisted Synchronous Reluctance Motor with Different Flux Barrier Rotor (in session "Tue-Af-Po2.06")

Towards real time computation of 3D magnetic field in parametrized Polyhelix magnets using a reduced basis Biot-Savart model (in session "Tue-Af-Po2.10")

Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation (in session "Mon-Mo-Or1")

Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade (in session "Mon-Mo-Or1")

Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging (in session "Mon-Af-Po1.03")

Transport properties of commercially available REBCO conductors at 4.2 K (in session "Thu-Af-Po4.08")

Tuneable permanent magnets: Power saving solutions for the next generation of high energy accelerators. (in session "Wed-Mo-Or19")

Twin aperture bending magnets and quadrupoles for FCC-ee (in session "Wed-Mo-Or19")

Two-layer 16 Tesla cosθ dipole design based on MQXF Low-Beta Quadrupoles (in session "Wed-Af-Or23")

Two-layer, Cosθ Dipole for the FCC (in session "Wed-Mo-Pl6")

Ultimate Forces of the Grenoble Hybrid Magnet (in session "Thu-Mo-Or33")

Ultra-high field HTS flux-pumped magnets (in session "Tue-Af-Po2.11")

Unbalanced Torque in High Magnetic Field No-Insulation REBCO Pancake Magnet after Quench (in session "Mon-Af-Po1.10")

Uniaxial Strain Induced Critical Current Degradation of Ag-Sheathed Bi-2212 Round Wire (in session "Wed-Af-Po3.09")

Upgrade of the Grenoble High Magnetic Field Facility (in session "Mon-Af-Po1.12")

Upper critical and irreversibility magnetic fields and transport properties of bulk K-, Ni-, and Co-doped BaFe2As2 pnictides for different granularities and their prospects in magnet design (in session "Wed-Af-Po3.10")

Vacuum Pressure Impregnation for Central Solenoid of JT-60SA (in session "Mon-Af-Or4")

Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements. (in session "Tue-Mo-Or12")

Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor (in session "Tue-Af-Po2.06")

Vibration Comparison of Two Fault-Tolerant Flux-Switching Permanent-Magnet Machines (in session "Tue-Af-Po2.06")

Vibration of Magnetically Controlled Saturated Reactor under AC and DC excitation (in session "Wed-Af-Po3.08")

Walk-Through MRI: Affordable Technology for Well-Patient Cancer Screening (in session "Thu-Af-Po4.04")

Waveform conditioning problems in high frequency magnetization of nanocrystalline alloys (in session "Thu-Af-Po4.10")

Windability tests of Nb3Sn Rutherford cables for HL-LHC and FCC (in session "Wed-Af-Po3.01")

Winding Deformation Caused by Reaction Heat-treatment for ITER TF coil (in session "Wed-Af-Po3.02")

Winding R&D for CFETR Central Solenoid Model Coil (in session "Wed-Af-Po3.02")

Winding Technology And Experimental Study On Superconductive Fault Current Limiter (in session "Tue-Af-Po2.07")

YBCO pancake coil wound using an electrically non insulated tape: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T (in session "Wed-Af-Po3.11")

Zylon aging and light resistance (in session "Wed-Af-Po3.10")

MT25 Conference 2017 - Timetable, Abstracts, Orals and Posters

Support

Material Package

Choose timezone

MT25 Conference 2017 - Timetable, Abstracts, Orals and Posters

Support