15–16 Jan 2009
CERN
Europe/Zurich timezone

Contribution List

9 out of 9 displayed
Export to PDF
  1. Lyn Evans (CERN)
    15/01/2009, 09:00
  2. Maurizio Vretenar (CERN)
    15/01/2009, 09:10
    Overview of the Linac4 project
    Go to contribution page
  3. Bettina Mikulec (CERN)
    15/01/2009, 09:35
    - Versatility of the (present) machine (to be maintained) - Generation of “exotic” beams (some thoughts on machine activation?) - Transfer of LHC type (and other) beams to the PS
    Go to contribution page
  4. Alessandra Lombardi (CERN)
    15/01/2009, 10:05
    - Generation of energy modulation - Beam characteristics to be expected around the PSB injection (distribution region up to injection point) - Tunability, uncertainties
    Go to contribution page
  5. Christian Carli (CERN)
    15/01/2009, 11:00
    - Longitudinal painting - Simulation of beams with strong direct space charge forces, - Limitations due to H- injection hardware, - Planned studies (investigations on feasibility of collimation)
    Go to contribution page
  6. Wim Weterings (CERN)
    15/01/2009, 11:45
    - Layout, apertures magnets of the distributor region - Layout, apertures, magnets and vacuum aspects of the injection region - Foil handling mechanism - Environment seen by the beam (BS inside/outside vacuum, shielding of cavities created ..)
    Go to contribution page
  7. Dr Brennan Goddard (CERN)
    15/01/2009, 14:00
    - Transverse painting and aperture aspects, impact of injection failures on foil - Foil exchange procedures (activation, time …) - Control of injection losses and beam dump - Specific instrumentation
    Go to contribution page
  8. Dr Klaus Hanke (CERN)
    15/01/2009, 14:30
    - Commissioning strategies - Milestones - Possible difficulties and cures (use of instrumentation)
    Go to contribution page
  9. Alfred Blas (CERN)
    15/01/2009, 15:15
    - Instabilities with higher intensities - Beam loading problem at present with C04 cavities - Future low RF level system (communication with Linac4 for chopping)
    Go to contribution page

Back to the event