LIU - Planning & Installation meeting

→ Europe/Zurich
864/1-C02 - indisponible a partir du 24/04/2017 (CERN)

864/1-C02 - indisponible a partir du 24/04/2017

CERN

50
Show room on map
    • 16:00 → 16:05
      Approval of the minutes 5m
      Speaker: Julie Coupard (CERN)
    • 16:05 → 16:10
      LIU-PLI Follow-up 5m
      • Follow-up on the SRRs and ECRs
      Speaker: Julie Coupard (CERN)
    • 16:10 → 16:25
      LIU-PSB ECR PSB-BWSRA-EC-0001 (EDMS 1704838) New Rotatable Beam Wire Scanner Prototype Installation in the PS Booster 15m

      It is proposed to install one prototype of a rotatable beam wire scanner, the instrument with a new upgraded design in Period 4L1 of the PS Booster. The device is used to measure and reconstruct the beam profile in different accelerator machines. Devices with identical design will be installed in PS, SPS and other sections of PSB during the LS2, after the prototype validation.

      Speaker: William Andreazza (CERN)
      ECR
    • 16:25 → 16:40
      LIU-PSB ECR PSB-K-EC-0002 (EDMS 1707703) New Alcove Construction for PSB Injection BSW Power Converter's Pulse Transformers 15m

      For the new 160MeV beam injection from Linac4 into the Proton Synchrotron Booster (PSB), a new set of slow bumper magnets (BSW) has to be supplied by new power converters. The powering scheme includes matching pulse transformers between the power converters and the BSW magnets. For 12 circuits (amongst 16) the pulse transformers have to be placed near the BRF2 room in building 361, and a new space has to be created via civil engineering work.

      Speakers: Davide Aguglia (CERN), Serge Pittet (CERN)
      ECR
    • 16:40 → 16:55
      LIU-SPS SRR SPS-BCTW-EC-0001 (EDMS 1701629) New Fast BCT for SPS LSS5 (EYETS 2016-2017) 15m

      This document proposes to install a BCTW in SPS LSS5 just after QD.51910 in EYETS 2016-2017. The BCTW has an inner diameter of 80mm, and its design has been thoroughly tested in LHC.

      Speaker: Lars Soby (CERN)
      SRR
    • 16:55 → 17:10
      LIU-SPS ECR SPS-VF-EC-0001 (EDMS 1709280) SPS Flange Impedance Reduction in EYETS 2016-2017 15m

      The shielding of the known cavities in the vacuum system interconnections of the Short Straight Sections adjacent to the QF quadrupoles is proposed to improve the longitudinal impedance of the machine.

      Speakers: Jaime Perez Espinos (CERN), Paul Cruikshank (CERN)
      ECR
    • 17:10 → 17:15
      AoB 5m