9-Level Cascaded H-bridge Multilevel Inverter (in session "Interdisciplinary")
A study of effect of tempered glass fines in concrete at elevated temperature (in session "Civil Engineering")
Advances in Petroleum Engineering current Industry Situation (in session "Mining Engineering")
Air Pollution Deterministic Index Modeling (APDIM) for Pakistan: Application in Quetta City (in session "Environmental Engineering and Management")
An Overview of Different Microencapsulation Techniques for Smart Textiles (in session "Textile Engineering and Technology")
Architecture becoming a global cliche' (in session "Architecture and Town Planning")
ASSESSMENT ON QUANTITY MEASUREMENTS OF HEALTHCARE WASTE AND IT’S MANAGEMENT APPROACHES IN BOLAN MEDICAL COMPLEX QUETTA (in session "Environmental Engineering and Management")
Carbon Dioxide Capture from Natural Gas and Flue Gases Using Membrane Technology (in session "Chemical Engineering")
Catalytic Pyrolysis of microalgae (Chlorella sp.) Using Zeolite as Catalysts in a Fixed Bed Reactor (in session "Chemical Engineering")
Common Ground in a Liquid City (Urban Entertainment Destination: A Tool against Classism) (in session "Architecture and Town Planning")
Comparative analysis of heat transfer coefficient for wood and non-wood pulp fiber suspension (in session "Mechanical and Material Engineering")
Comparison of Flooding Irrigation System and Raised Bed Irrigation System for Wheat Crop at Samoo District Jaffarabad Balochistan (in session "Geological Engineering and Geosciences")
Cost Reduction Strategies for Engineering and Technology Organizations in Knowledge Markets (in session "Environmental Engineering and Management")
CPEC and Balochistan-Prospects and Challenges (in session "Geological Engineering and Geosciences")
Deterioration Morphologies of Historic Brick Imitation Ornamented facades of Mughal Architecture (in session "Architecture and Town Planning")
Development and Characterization of Textile Strain Sensors Using Different Weave Designs (in session "Interdisciplinary")
Development of a Geotechnical Information Database. (in session "Civil Engineering")
Development of antibacterial fibers and study on effect of guar-gum addition on properties of carboxymethylcellulose/alginate fibers (in session "Textile Engineering and Technology")
Development of Mobile Ecosystem for Smart Sharing of Domestic Water Efficient Collection and Supply Management, for Quetta City (in session "Civil Engineering")
Development of nanofibers based neuropathic patch loaded with Lidocaine to deal with nerve pain in burn patients (in session "Textile Engineering and Technology")
Disaster Mitigation Strategies for Adobe Houses: A Case Study of District Awaran, Balochistran (in session "Architecture and Town Planning")
DOMESTIC THREE STAGE TREATMENT OPTION FOR WATER STRESSED COMMUNITIES (in session "Environmental Engineering and Management")
EFFECT OF MATERIAL AND STITCHING ON TENSILE PROPERTIES OF WOVEN FABRICS (in session "Textile Engineering and Technology")
Effect of Silica Fume and Lime on Compressibility of Baleli Soil (in session "Geological Engineering and Geosciences")
Effect of the confining method on the cyclic undrained behaviors of sand (in session "Civil Engineering")
EFFECTIVE USE OF ENZYME ZYMASE FOR ENHANCEMENT OF ETHANOL PRODUCTION COUPLE WITH PARAMETRIC EFFECT (in session "Interdisciplinary")
EFFICIENCY AND COST ANALYSIS OF POWER SOURCES IN IMPRESSED CURRENT CATHODIC PROTECTION SYSTEM FOR CORROSION PREVENTION IN BURIED PIPELINES (in session "Interdisciplinary")
Electrical conductivity and EMI shielding application of high loft non- woven web from acrylic fibrous waste (in session "Mechanical and Material Engineering")
Emprical SPT-CPT correlation for soils from Lahore, Pakistan (in session "Civil Engineering")
Engineered Silica Nanoparticles and SiNps containing Controlled Release Fertilizer for drought and saline areas (in session "Interdisciplinary")
Enhancement of anti-microbial activity by natural finishes prepared from herbal spices and wastage peel of fruits applied on textile substrate. (in session "Textile Engineering and Technology")
Enzymatic Stabilization of Expansive Soil (in session "Geological Engineering and Geosciences")
Extraction and quantification of chlorophyll from microalgae Chlorella sp. (in session "Interdisciplinary")
EXTRACTION OF OIL FROM ALGAE FOR BIODIESEL PRODUCTION (in session "Geological Engineering and Geosciences")
Fabrication of copper oxide nanoparticles and their application on textiles to make it multi-functional (in session "Textile Engineering and Technology")
Fabrication of Organic Nanofibers via Electrospinning (in session "Textile Engineering and Technology")
Features of Convective Heat Transfer on MHD Peristaltic Movement of Williamson Fluid with the Presence of Joule Heating (in session "Chemical Engineering")
Fibrous Structure for EMI shielding (in session "Textile Engineering and Technology")
Future Climatological Drought Projections Over Quetta Valley, Balochistan, Pakistan (in session "Geological Engineering and Geosciences")
Human Machine Interface Glove Using Piezoresistive Textile Based Sensors (in session "Geological Engineering and Geosciences")
Hydrodynamic and combustion behavior of low grade coals in a circulating fluidized bed combustor (in session "Mechanical and Material Engineering")
Identification of Brittle and Ductile Zones of Reservoir by Using Well Log Analysis (in session "Geological Engineering and Geosciences")
Improvement of Bearing Capacity of Soft Clayey Soil by Inclusion of Sand Columns (in session "Geological Engineering and Geosciences")
In-plane shear strength analysis of Basalt Fiber-Reinforced Epoxy Laminates with Biowaste Catalyst Free Carbon (in session "Mechanical and Material Engineering")
Interactive Bus Stops: Enhancing user experience to encourage the use of Public Transportation (in session "Architecture and Town Planning")
Investigation of carbon based adsorbents for the development of thermally-driven adsorption cooling systems (in session "Mechanical and Material Engineering")
Investigation of optimum fluidization velocity of CaCO3 and Coal mixture using fluidized bed (in session "Mining Engineering")
Investigation of raw materials for cement industry of Upper Hunza, Gilgit-Baltistan (in session "Mining Engineering")
Isocoumarins: Compounds having unique applications (in session "Textile Engineering and Technology")
Land use changes impact on groundwater quality using remote sensing and GIS in Quetta Valley (in session "Environmental Engineering and Management")
Making City Planning Regional in 21st Century Pakistan: Towards a National Charter for Climate Change Survival (in session "Architecture and Town Planning")
Manufacturing of high performance multilayer stitched fabric on a hand loom (in session "Textile Engineering and Technology")
Material Archives; Understanding Urban Geographies Built from Material Circulation (in session "Architecture and Town Planning")
Mechanical Characterization of Economical Waste Based Hybrid Composites for Automotive Application (in session "Textile Engineering and Technology")
Mitigating Freshwater Needs by Reuse of Greywater for Residential Apartments in Islamabad (in session "Environmental Engineering and Management")
Modeling and Simulation of a 100 MW Concentrated Solar Thermal Power Plant Using Parabolic Trough Collectors in Pakistan (in session "Mechanical and Material Engineering")
Numerical Evaluation of Slope Stability measures: A Case Study of Birham Landslide (in session "Civil Engineering")
Numerical modeling of main/tail gate of a long wall mining operation (in session "Mining Engineering")
Panel Discussion (in session "Architecture and Town Planning")
Partial Replacement of Cement in Plain Cement Concrete with Bentonite Clay and Quarry Dust (in session "Civil Engineering")
Particle size of Acacia Modesta gum powder changes the properties of self-compacting paste ssytems (in session "Environmental Engineering and Management")
Photocatalytical Degradation of Congo Red dye by Nano Titanium Dioxide coated glass Bead under UV light (in session "Chemical Engineering")
Power Production Dynamics of China Pakistan Economic Corridor in Pakistan (in session "Interdisciplinary")
Production of Alternative Energy from Microalgae (in session "Chemical Engineering")
Promoting Modern Applications of Biomass Energy for Cooking and Heating in household Sector in Pakistan (in session "Chemical Engineering")
Rainwater Harvesting, an important measure to meet water requirement in arid areas of Pakistan. (in session "Environmental Engineering and Management")
Renewable Energy Resources in Pakistan (in session "Mechanical and Material Engineering")
Reorientation of Pakistan’s Energy policy (in session "Chemical Engineering")
Role of masonry infill wall on the seismic behavior of typical four-storey building in Pakistan (in session "Civil Engineering")
SCARCITY OF WATER RESOURCES IN RURAL AREA OF QUETTA DISTRICT: CHALLENGES AND PREPAREDNESS (in session "Environmental Engineering and Management")
Simulation of PEMFC by Using ANSYS Fluent for Isothermal and Non-isothermal Models (in session "Chemical Engineering")
Site Specific Ground Response Analysis of Peshawar, Pakistan (in session "Civil Engineering")
Solar Based Smart Irrigation System Using PID Controller (in session "Environmental Engineering and Management")
Stability Analysis of flood bunds, A study on Geotechnical Health evaluation of embankments (in session "Mining Engineering")
Strategies to Manage Aquifer Recharge in Balochistan, Pakistan; an Overview (in session "Geological Engineering and Geosciences")
STRUCTURAL DEFECTS IN RESIDENTIAL BUILDINGS: A STUDY OF QUETTA, PAKISTAN (in session "Civil Engineering")
Study of the Fluoride assessment in correlation with different physicochemical parameters in drinking water of some areas of Quetta, Pakistan (in session "Environmental Engineering and Management")
Study the effects of epoxy/tri functional mercaptan resins structure based PDLC films (in session "Chemical Engineering")
SWOT Analysis of Institutional Framework for Engineering Diplomas in Technical and Vocational Education and Training (TVET) System in Pakistan (in session "Interdisciplinary")
Synchrotron radiation for research in Engineering Sciences : Prospects at SESAME (in session "Interdisciplinary")
Synthesis and Characterization of Silver Nano Particle and their application for removal of E-Coli from waste water. (in session "Environmental Engineering and Management")
Synthesis of Magnetic Nano-rods of Cobalt using Templet from the Anodization of Aluminum as Anodic Aluminum Oxide (AAO) (in session "Interdisciplinary")
THERE AND BACK AGAIN (Identifying the unidentified) (in session "Architecture and Town Planning")
Thermal Processing of Biosources and Biodiesel Using Microwave Heating (in session "Chemical Engineering")
Thermodynamic investigation of M-cycle assisted open-cycle desiccant air conditioning systems (in session "Mechanical and Material Engineering")
Trend analysis in precipitation and accessing the influence of climate indices in Baluchistan (in session "Interdisciplinary")
Upscale fermentation of Bacillus licheniformis to produce probiotic for poultry, using cheap media (molasses) (in session "Chemical Engineering")
Include materials from selected contributions
