GAS M&O meeting 09 March 2020
Present: Beatrice, Roberto, Patrick, Kacper, LPh, Michal, LPh, Mara, Gianluca, Sabino, Fabio, Federico
Indico: https://indico.cern.ch/event/893669/
ALICE #2305
- MTR
- One MFC of humidifier is in error —> LPh/Michal to check
Reminder:
-
- Alarm in power supply: DC MCB trip —> Michal/Patrick to check
- exhaust pressure regulation does not work
- TOF
- Tomorrow to start the gas system and then to do analysis with the GC
- CPV
- Purge of two lines and now it seems ok
- We have 3 lines input that are ok, and 3 lines output: in one there is not the return. LPh contacted Yuri
- Humidifier: leak test done (few leaks found). LPh to prepare electrical plan
- TPC
Reminder
-
- In the purifier the small thermic box triggered (also last year it happened) —> Patrick/LPh to check
- PGS
- Ar/H2 no gas during week-end: one side was not “ON”
- PT11301 seems to not work —> LPh to check and then to contact David
- TRD
Reminder
-
- Recuperation: missing two valves but there are present in the software
- Purifier: to review if keep the safety valve or the rupture disk
- Purifier: safety valve at the input where we have Ar or Ar/H2 at high pressure —> LPh to check with safety
ATLAS #2309
- MDT
- Problem on the electrical part during the week-end: Patrick explained the problem
- Now he took out one convertisseur, one pump, etc from the system —> Patrick to fix
- Still pressure overshoot after the re-start —> to understand asap
- Problem in the 2 vaisala of humidifier: several spikes present. Not clear why. Before the software upgrade they were not present
- Reminder:
- Found a problem of grounding on pressure sensors: pressure sensors changed. Now to verify if the grounding problem is still there
- RPC
- Rack 63 stopped and rack 61 started
- Change from automatic to manual valve but fluctuations on the flow visible
- Tomorrow to stop rack 61 and start rack 62
- TGC
- Safety visit for welding in liquifier: to flush with CO2 and to prepare a list of what we want to do —> Kacper
- Flush CO2 to prepare the system for welding
Reminder
-
- Power of bande chauffant —> Patrick/Kacper
- Several electrical problem in ATLAS:
- See elog 2205, 2206, 2207
- Patrick to prepare a protocol for the student to identify the failures
CMS #2294
- RPC
- Dummy chamber rack 83 in progress
- Bubblers: level of oil is wrong in 50% of the system —> Andrea/Mara to check and fix
- Reminder:
- Michal changed the mother board: now flow is 170 l/h (elog #2279) —> Andrea to check with new voegtlin red
- Missing quick manifold and flowcell in barrel +1 and +2
- Swap of pipes in rack RE-1 (racks 61 and 65) and RPC 3.1 (racks 63 and 87)
- DT
- Change one motherboard in rack 61 but flow didn’t change (elog #2280) —> to try to recalibrate one set of flowcells
Reminder:
-
- Difficult to re-start the gas system after power-cut —> to do some tests
- Test for power cut and re-start for the exhaust line —> to do other tests
- GEM
- Andrea prepare a drawing for ME0 and check for space in UX —> Andrea to send an email to Michele
- CSC
- On-going regulation of PID for the exhaust (Beatrice)
Reminder:
-
- Warning to set-up —> Beatrice/Michal/Roberto
- CF4 Recovery
- To use battery A to finish and then exchange it with new battery (the one with single bottles): around 20 of March
LHCb #2307
- RICH1
- In closed loop with CO2. Stop during week-end
- to check if we take air —> Mara
- RICH2
Reminder
-
- to inject Air —> Patrick to check with C. Frei
- to add line for analysis “supply to detector”
- SciFi
- Problem on 3-ways valve —> Patrick to fix
- MWPC
- Problem in the GC analysis of the mixer: not visible the correct gas mixture with both LF and HF. Probably an hardware problem (connection, valve, etc) to find.
Reminder
-
- Leak in Mixer and Exhaust. Only in Exhaust found but not repaired. Other not yet founded —> Patrick to check when we can stop the system
- Interlock of Ar/H2 does not work —> Michal/Patrick to check
- Problem with Profibus cable/connector module —> to understand where —> Patrick
PIQUET
- ALICE Ar/H2 supply (#1009)
- ATLAS MDT stop (#1008)
GENERAL
There are minutes attached to this event.
Show them.