Conveners
Timing: I
- Simon Spannagel (Deutsches Elektronen-Synchrotron (DE))
Timing: II
- Simon Spannagel (Deutsches Elektronen-Synchrotron (DE))
The proven radiation hardness of 3D technologies up to fluencies exceeding 1$x10^{16}n_{eq}/cm^{2}$ makes them a prime candidate for next generation high energy physics experiments. In addition, the decoupling of the charge generation and drift volumes unique in these structures, provides excellent timing characteristics without radiation hardness comprise or the need for additional...
Vertex and tracking detectors for future high-energy physics experiments face stringent requirements in view of their spatial and temporal measurement performance as well as the projected experimental conditions.
Within the ATTRACT FASTPIX project, a monolithic pixel sensor demonstrator chip has been developed in a modified 180 nm CMOS imaging process technology, targeting sub-nanosecond...
"The MONOLITH ERC Advanced project targets the development of very thin monolithic pixel sensors capable of reaching picosecond-level resolution combined with high granularity. To achieve such performance the project profits from the 130nm SiGe BiCMOS technology by IHP to produce very fast, low noise and low power front-end electronics. Small prototypes have been tested at the H8 SPS beam...
The MONOLITH H2020 ERC Advanced project aims at the development of fully monolithic highly granular pixel sensors with picosecond time stamping capabilities. To reach a picosecond precise sensor response, a thin gain layer has been implemented deep inside a high-resistivity epitaxial layer. By moving the gain layer away from the pixel implantation, the pixel size can be reduced down to 50 µm,...
Test beams are frequently used for developing high resolution Time-of-Flight (ToF) equipment. To investigate the timing properties of detectors under test, a reliable and reproducible time reference counter (TRC) would be an important asset for a test beam facility. Frequently ToF detectors are calibrated only occasionally and it may be difficult to guarantee that their calibration is...
