Legend
- This is something reported or discussed
- [ ] This is something to do
- [x] This is something done
Maintenance
Recuperation systems
- [ ] Check how we can notify if a column is not filling
- [ ] Disable column 3 and 4
- [x] Electrical part to be finished and control system tested (Patrick, Andrea, Gianluca)
- [ ] Gian
- Presentation of MCA
- [ ] CF4 analyses of the battery for Air to be done
- [ ] Ask for ATEX Voegtlin flowmeter with analog output interface
- [ ] Check if we can upgrade with rollback option
- R134a recuperation tank contains 5000 ppm of i-C4H10. Not being used for reinjection
- [ ] To decide if we can use it for injection
- No SF6/R134a found in TPC gas (both GC and MS)
RPC Lab 256
- [ ] Replace glass of the rack door
- [ ] Start with 30% CO2 to check currents and efficiency for GIF detectors (Stef)
- [ ] Compare the efficiency with last test beam
- [ ] Compare the currents with the last HV scan done at GIF++
- [x] Safety and electrical inspection to be done March 1, 2024
- [x] For each bottle check the price (Stef)
- [x] Mixer check for speeding
- [ ] Ask GT for a price quotation of reoiling the gap.
- [ ] Check about re-oiling ECOGAS RPC 6
- [ ] Check how the oiling is done
uLOOP
- [ ] Follow up pressure sensors aging tests (Stef)
- [x] Buy 1 widgetlords kit for testing
- O2 zircon sensor price quotations asked
- [x] Buy 0-1000 ppm with m&o budget
- [ ] Ask Daniel which humidity sensor they have in DT (Mattia)
- [ ] Check for ATEX pumps (Stef, Pieter)
GLASS RPC
- Construction of the detector
- Mattia will present in the next meetings how to build a GRPC
- [ ] Once mixer is okay test detector
- [ ] Think about making 3D drawings of the prototype?
RPC GIF
- [ ] Plan the building of the new humidifier volume
- [x] Ask Fred to put the humidifier in the planning
- [ ] Follow the construction (Stef, Mattia)
- [ ] Change HV cables
Analyses
- Presentation of Mattia
- [ ] Put F- vs currents plots
- [ ] Try to debug multiway valve in ALICE: close bronkhorst or bypass valve
- [ ] Check CSC purifier saturation time
- [x] ISE measurements in ALICE: start couple of weeks before the run for having a reference (MCA, Mattia)
- [x] Check alternatives to Emerson for IR ⇒ Stef, MCA
- [ ] Follow up with Florian for UV-VIS analyses
Other
-
Presentation of Mattia about pneumatic attenuated econex
- Price ~500 CHF, waiting for quotation
-
[x] Ask LPh for help to clean up 256 and organize the space
-
[x] GCMS: problems in connecting from PC. Ip address changed
-
[ ] Mixer from ETH ⇒ sending a volume filled instead
-
[ ] Check CPV water and eventually go with the endoscope
-
[x] What do with rpcgif
account:
-----Original Message-----
From: Stefan Lueders <Stefan.Lueders@cern.ch>
Sent: lundi 12 février 2024 11:53
To: Roberto Guida <Roberto.Guida@cern.ch>
Subject: March 26th: Activation of 2FA to your secondary account "rpcgif"
Hello!
(Apologies if you have already received this message and acted upon it. Please ignore this email in that case.)
YOUR ACTION IS REQUIRED, as your secondary account "rpcgif" will be subjected to 2-factor authentication ("2FA") on or after March 26th. Actually, you might have received the mail below several times already...
In order to better protect CERN's digital assets, we are deploying 2FA to CERN computing accounts (with 7500++ accounts enlisted so far). In fact, "2FA" is the silver bullet in protecting computing accounts against any kind of abuse. For example, in our latest phishing campaign in August 2022 2000+(!) people provided their password to a fake login page. "2FA" would have protected their accounts from any evil abuse (<https://home.cern/news/news/computing/computer-security-room-top>). Please find more details at the end of this email.
In the next phase, this 2FA protection shall be applied to ALL CERN SECONDARY ACCOUNTS, including "rpcgif", by March 26th (see the full planning here: <https://cern.service-now.com/service-portal?id=outage&n=OTG0071297> ). Hence, we would like to kindly invite you to enroll "rpcgif" to 2FA if not already done yet, in particular IF IT IS USED FOR ADMIN/PRIVILEGED ACCESS:
* If this account is not needed anymore, please delete it at <https://cern.ch/accounts>, "My Accounts"-tab, select "rpcgif" and go to "Delete Account" in the sidebar on the right;
* If this account is used for automatic/programmatical access (e.g. to APIs), please contact the CERN ServiceDesk to get it converted into a so-called service account (which should not be used by humans but, as the name suggests, for running automatic services);
* If this account is shared among people, you should ideally use primary/personal accounts and control their access via e-groups;
* For enrolling to 2FA, just follow these instructions: <https://cern.service-now.com/service-portal?id=kb_article&n=KB0006587> . Please use YOUR SECONDARY ACCOUND during its configuraton steps. If you use already a Yubikey, you can also employ it for your secondary account;
* Once done, in order to activate it, please sign up that secondary account (NOT your primary account NOR you as a "Person") to this e-group: <https://e-groups.cern.ch/e-groups/Egroup.do?egroupId=10474329> -> "Members"-tab -> "Add member" on the right: "Type: Account" and add "rpcgif".
Please note that your account might not be accessible anymore in the future if you have not enabled your "2FA"...
Thanks a lot for helping to secure the Organization. In case of questions, check out the information below or contact us directly.
Yours sincerely,
CERN Computer Security Team
<https://cern.ch/security>
- With 2FA we can’t share the code access
- We can’t use rpcgif as secondary account to access PCs anymore
- We can’t use rpcgif to login to other services (e.g. SWAN) anymore
Possible solutions
- Move rpcgif to a service account and not use it anymore
- Ask for derogation if we explain our use case (very unlikely they will let us do it but they might give us more time to transition)
- For this we all need to compile a list of places where
rpcgif
is used and why
- For each use case we have to check how to use primary accounts with e-groups
- For special PCs with software installed, use a local account (like Administrator or one custom created) instead of a CERN account
- [ ] Contact IT to see if we can use a service account (Gian)
uRWELL
- [ ] Try to check if currents can be seen from CAEN HV instead of preamp HV
- Following up with Matteo and Florian
- Waiting to replace frames with Florian
- [ ] Check about making the same preamp as Frascati to understand signal to noise ratio
ISE R&D
- Calendar of activities for ALICE ISE measurements
- [ ] Follow up measurements of ATLAS RPC
Flowcells calibration stand
- [ ] After YETS prepare a Summary of the interventions and issues (Pieter)
Novec humidity test setup
Software (from old meeting)
- [ ] Organize the required work for a possible rewrite of the backend of olefin
- [ ] Understand how to organize gitlab
- [ ] Organize the storage of the data in a new dataframe
- [ ] For muon signals
- [ ] For gamma signals
- [ ] Signal level calculations
- [ ] Simple: simple baseline, time, charge of a peak
- [ ] To study: advanced baseline calculation
- [ ] After pulses count
- [ ] Avalanche and streamer charge integration and separation
- [ ] Try to calculate charge of each gamma signal
- [ ] Aggregating statistics calculations
- [ ] calculate features only from central strips
- [ ] Gamma cluster rate calculations
There are minutes attached to this event.
Show them.