Seoul National University
Author in the following contributions
- Sat-Mo-Po.08-10: Experimental study of the solderless joint on solenoid magnet with radial pressure structure
- Wed-Af-Po.04-08: Design, fabrication, and experiment of roller shaped high-temperature superconducting coil joint apparatus
- Fri-Mo-Po.01-03: Characterizing the effects of distributed time constants and screening currents on the voltage responses of no-insulation HTS coils
- Fri-Af-Po.06-01: Progress report and future plans for a 20 T, 50 mm room temperature bore high-homogeneity all-HTS magnet with conduction-cooled system
- Thu-Mo-Po.06-02: Study on mechanical movements of HTS coils due to winding and thermal effect
- Sat-Mo-Po.04-04: Effect of the type of solder flux on high-temperature superconductor tape under time-varying conditions
- Wed-Af-Po.04-03: Aging effects in (RE)B2C3O7-d tapes solder joints made with indium-tin
- Fri-Mo-Po.01-02: Stochastic analysis on the factors affecting critical current and index value of multi-tape co-wound NI HTS coil
- Thu-Af-Po.11-06: Cooling Experiment of High-Temperature Superconducting Magnet Components (Parts of a 20 T Magnet)
- Wed-Mo-Po.09-02: Experimental study of thermal contact resistance in stacked REBCO tapes for superconducting cable under dry and wet configuration
- Thu-Mo-Po.09-08: Development and evaluation of mechanical reinforcement strategies for REBCO racetrack coils using a custom test rig
- Fri-Af-Po.01-05: Analysis of joint stress during quench in a REBCO magnet
- Thu-Mo-Or2-07: Conduction cooling test of salient-pole no-insulation HTS field winding for synchronous motor
- Wed-Af-Or2-02: Investigation of Contact Resistivity Dependent Quench Behaviors for Inductive-Type Quenches in No-Insulation HTS Coils
- Wed-Af-Or3-02: Assembly and Test results of Cryogen-free Conduction Cooled Wavelength Shifter Magnet in Final Cryostat
