Name: CEC/ICMC 2025 Abstracts & Technical Program
Start: 2025-05-18T07:30:00-07:00
End: 2025-05-22T13:00:00-07:00
Location: Peppermill Reno

Monday 19 May 2025

07:45 Slides with Friends
Slides with Friends
07:45 - 08:00
08:00
08:00 - 09:00
Contributions

08:15 C1PL1-01: Novel Sub-Kelvin Cryogen-free Refrigeration at Zero Point Cryogenics - John Davis (University of Alberta)
09:00 CRYO EXPO Open
CRYO EXPO Open
09:00 - 16:00
09:15
09:15 - 11:00
Contributions

09:15 C1Po1A-09: Impact of wave breaking on heat and mass transfer in a horizontal circular tank under non-isothermal sloshing conditions. - Stuart Colville (University of Plymouth)

09:15 C1Po1A-07: Design of a Laboratory-Scale Hydrogen Liquefier Cold Box for Low-Altitude Economy and Modular Deployment - Jihao Wu

09:15 C1Po1A-03: Effect of helium-neon composition in Brayton refrigeration cycle for hydrogen liquefaction - Ho-Myung Chang (Hong Ik University)

09:15 C1Po1A-01: Numerical simulation of active magnetic regenerative refrigeration for hydrogen liquefaction - Koji Kamiya (National Institute for Materials Science)

09:15 C1Po1A-02: Active Magnetic Regenerative Refrigerator (AMR) with rotating permanent magnet for liquid hydrogen - Kyohei Natsume (National Institute for Materials Science)

09:15 C1Po1A-11: Mega-Scale Liquid Hydrogen (LH2) Storage for Energy Storage & Transportation - Shanaka Kristombu Baduge (The University of Melbourne)

09:15 C1Po1A-10: Hydrogen permeability of fiber-reinforced thermoplastics under cryogenic conditions - Maximilian Grabowski

09:15 C1Po1A-08: Study on Zero Boil-Off of Liquid Hydrogen using a Single Stage GM cryocooler - Yutaro Koike (Sumitomo Heavy Industries, Ltd. - Technology Research Center)

09:15 C1Po1A-06: Updated design of the ESS cryogenic moderator system - Hideki Tatsumoto (European Spallation Source ERIC (ESS))

09:15 C1Po1A-05: Spallation Neutron Source Upgrade Status and Operational Success of the Cryogenic Moderator System - Rocky Armstrong (Oak Ridge National Laboratory)
09:15 - 11:00
Contributions

09:15 C1Po1B-10: Research on the Influence of Average Pressure on the Thermodynamic Cycle and Performance of Pulse Tube Cryocoolers - MengLin Liang (Technical Institute of Physics and Chemistry, Chinese Academy of Science)

09:15 C1Po1B-06: Performance simulation and model verification for a 20K thermal-coupled two-stage high-frequency pulse tube cryocooler - Jia Quan (Technical Institute of Physics and Chemistry, Chinese Academy of Science)

09:15 C1Po1B-05: Numerical and experimental investigation of the compressor coupling characteristic of a 20K thermal-coupled two-stage high-frequency pulse tube cryocooler - Jia Quan (Technical Institute of Physics and Chemistry, Chinese Academy of Science)

09:15 C1Po1B-04: A high frequency lightweight coaxial pulse tube cryocooler operating at 70 K - Bo Tian (1 Key Laboratory of Technology on Space Energy Conversion, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C1Po1B-01: In-line and coaxial configuration performances of Stirling pulse tube cryocoolers for spaceflight - Alyssa Wang (Center for Astrophysics | Harvard & Smithsonian)

09:15 C1Po1B-09: Simulation and experimental of phase shifter in high frequency pulse tube cryocooler - Geyang Li (Technical Institute of Physics and Chemistry CAS)

09:15 C1Po1B-08: Theoretical and experimental investigation of the effect of the phase shifter on the compressor of pulse tube cryocoolers - Mingtao Pan (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C1Po1B-07: Investigation on a thermal-coupled two-stage pulse tube cryocooler with multi-bypass working at 8 K - Mingtao Pan (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C1Po1B-03: Influence of the structure of multi-bypass configuration regenerator on the performance of Pulse Tube Cryocooler - Chenglong Liu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C1Po1B-02: 1 W@28.2 K micro single-stage coaxial pulse tube cryocooler operating at 52 Hz using precooling - Chenglong Liu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)
09:15 - 11:00
Contributions

09:15 C1Po1C-05: Study on the multiple cooling output characteristics of a gas-coupled high-frequency pulse tube cryocooler - Biao Yang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C1Po1C-04: Development of a 4 K pulse-tube refrigerator (PTR) for quantum device cooling - Jiho Park (Korea Institute of Machinery and Materials)

09:15 C1Po1C-03: Parametric thermal characterization of Sumitomo RDE-418D4 two-stage Gifford-McMahon cryocooler - Gilles Authelet (CEA Paris-Saclay)

09:15 C1Po1C-02: A new approach for low input and high capacity 4 K Gifford-McMahon cryocooler - Shinji Masuyama (NIT, Oshima College)
09:15 - 11:00
Contributions

09:15 C1Po1D-06: Development of a heat exchanger with distributed Joule–Thomson effect for a closed-cycle cryocooler - Takeshi Shimazaki (NMIJ, AIST)

09:15 C1Po1D-05: Design and analysis of sub-K continuous heat exchanger for dilution refrigerators - Milind Atrey (Indian Institute of Technology Bombay)

09:15 C1Po1D-04: Design and performance evaluation of a closed-cycle ³He sorption cooler - Juan Wang (Technical Institute of Physics and Chemistry, CAS) Xiang Fan (Technical Institute of Physics and Chemistry, CAS)

09:15 C1Po1D-03: Simulation and experimental study of ultra-low temperature heat transfer characteristics of continuous heat exchangers in the dilution refrigerator - Zijie Pan (Technical Institute of Physics and Chemistry, CAS)

09:15 C1Po1D-02: Design and experiments of 1 K superfluid 4He system for precooling the ultra-low temperature refrigerators - Zijie Pan (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Science, Beijing 100190, China) Lingjiao Wei (Technical Institute of Physics and Chemistry, CAS) Jiarun Zou (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Science, Beijing 100190, China)

09:15 C1Po1D-01: Research on an efficient Joule-Thomson throttling refrigeration system based on cold compression cycle - Yuefeng Niu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)
09:15 - 11:00
Contributions

09:15 C1Po1E-03: A backup compressor system for the ESS accelerator cryoplant - Philipp Arnold (European Spallation Source ERIC)

09:15 C1Po1E-02: Assessment of the existing cryogenic central plant for the Electron Ion Collider cryogenic loads at Brookhaven National Laboratory - Pratik Kumar Manubhai Patel

09:15 C1Po1E-05: Commissioning Results of The ESR 2 Compressors at JLab - Christopher Perry (Thomas Jefferson National Accelerator Facility)

09:15 C1Po1E-04: LCLS-II Cryoplant Cooling Water System: Challenges and Remediation - Saee Vyawahare (Stanford National Accelerator Laboratory)

09:15 C1Po1E-01: Evaluation of helium loss for a closed-loop cryogenic system - Feng-Zone Hsiao (National Synchrotron Radiation Research Center) Hsing-Chieh Li (National Synchrotron Radiation Research Center)
09:15 - 11:00
Contributions

09:15 C1Po1F-04: HL-LHC RF dipole crab cavities validation at TRIUMF - Alexey Koveshnikov

09:15 C1Po1F-03: Design of a new 12x150A helium-cooled current lead for EIC - Frederic Micolon (Brookhaven national laboratory)

09:15 C1Po1F-02: “Keep it simple, stupid”: Redesigning a chaotic low pressure LN2 delivery system to NMR instrument - Benjamin Arline (Florida State University - NHMFL) Zhiyi Jiang (Florida State University - NHMFL)

09:15 C1Po1F-01: Performance Investigation of Gas-Solid Heat Transfer from Room to Cryogenic Temperatures in Moving Solid-Phase Cold Storage - Yihong Li (Technical Institute of Physics and Chemistry, CAS)
Morning Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
Morning Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
09:15 - 09:45
09:30
09:30 - 10:30
Contributions

09:30 M1Or1A-01: Microstructure and 77K mechanical properties of electron beam welded Cu101- Inconel 625 joints - Shreyas Balachandran (Thomas Jefferson National Accelerator Facility)

09:45 M1Or1A-02: Multiscale Modeling of Polycrystalline Niobium Sheets to Capture Anisotropic Evolution - Taejoon Park (The Ohio State University)

10:00 M1Or1A-03: Comparative Analysis on Recrystallization and Recovery of High and Low RRR Niobium - Zu Hawn Sung

10:15 M1Or1A-04: Development of thermal joints for conduction-cooling applications - Jacob Lewis (Old Dominion University)
11:15
11:15 - 12:30
Contributions

11:15 C1Or2A-01: Maintenance of SCL3 cryogenic helium plant for Korean heavy ion accelerator after 3 years operation - Junghyun Yoo (Institute for Basic Science)

11:30 C1Or2A-02: LCLS-II Cryoplant Operational Availability: 3 Years of Operation - Saee Vyawahare (Stanford National Accelerator Laboratory)

11:45 C1Or2A-03: Cold compressor performance and energy consumption improvements at Jefferson Lab’s Central Helium Liquefiers - Brian Mastracci (Thomas Jefferson National Accelerator Facility)

12:00 C1Or2A-04: TurboBrayton systems for low and high temperatures - Pierre Barjhoux (Air Liquide)

12:15 C1Or2A-05: Operation experience with a 1.8 K refrigeration unit during the 2024 LHC physics run at CERN - Boyan Naydenov (CERN)
11:15 - 12:15
Contributions

11:15 C1Or2B-01: A dynamic simulation model for gas guided pistons in Stirling machines - Bruce Fischer (Auckland University of Technology)

11:30 C1Or2B-02: Improving energy efficiency and cryocooling performance through independent speed control of cryocoolers and compressors - Amy Kennedy (Oxford Cryosystems Ltd)

11:45 C1Or2B-03: Exergy measurements between a 4 K pulse tube refrigerator and its compressor - Ryan Snodgrass (National Institute of Standards and Technology)

12:00 C1Or2B-04: Parasitic Heat Load Reduction of Cryocoolers - Wolfgang Stautner (GE HealthCare – Technology & Innovation Center (HTIC))
11:15 - 12:15
Contributions

11:15 C1Or2C-01: Development of cryogenic infrastructures for quantum computing - Jean-Marc Bernhardt (Air Liquide Advanced Technologies)

11:30 C1Or2C-02: Quantum Computer Test Facility at SLAC using existing Cryogenic Infrastructure - Swapnil Shrishrimal (SLAC National Accelerator Laboratory)

11:45 C1Or2C-03: Ultra Compact Rack Cryostat System for Quantum applications - Sebastian Schaile (attocube systems AG)

12:00 C1Or2C-04: Conceptual Design and Initial Operation of a Single-Shot Dilution Refrigerator with a Small Helium-3 Inventory - Byeungcheol An (Korea Advanced Institute of Science and Technolog)
11:15 - 12:15
Contributions

11:15 M1Or2A-01: [Invited] Advanced Cryogenic Cooling Concepts for Superconducting Technologies on Electric Transport Platforms - Sastry Pamidi (FAMU-FSU College of Engineering & The Center for Advanced Power Systems)

11:35 M1Or2A-02: [Invited] Impacts of Liquified-Petroleum-Gas (LPG) and Liquid-H2 Cryogenic Fuels to improve the Performance and Thermal Management of Aerospace Vehicles - Timothy Haugan

11:55 M1Or2A-03: [Invited] Non-functional superconducting system requirements in a marine environment - Peter Ferrara (Naval Surface Warfare Center, Philadelphia Division)
14:00
14:00 - 16:00
Contributions

14:00 C1Po3A-07: Lumped Modeling of Cooling and Electric Devices in Aircraft - Xianhao Zhang

14:00 C1Po3A-03: Numerical simulation of active refrigeration for liquid helium storage - Xiujuan Xie (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 C1Po3A-08: Dynamic Analysis and Optimization of Aerostatic Bearing-Rotor Systems in Cryogenic Turbo Expanders - Shun Qiu (Technical institute of physics and Chemistry,CAS)

14:00 C1Po3A-05: Experimental study of two thermally-connected hydraulically- independent 20-tube neon pulsating heat pipes working in parallel - Tisha Dixit (CEA Paris-Saclay)

14:00 C1Po3A-02: Experiment research of intermittent flow cold storage surface heat exchanger - Wenhui Cui (Technical Institute of Physics and Chemistry,CAS)

14:00 C1Po3A-01: Optimization design of the brake impeller for cryogenic hydrogen turbine expanders - Changlei Ke (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China,)
14:00 - 16:00
Contributions

14:00 C1Po3B-06: CFD simulation of cryogenic LH2 external releases: a multicomponent-multiphase approach - Alvaro Vidal

14:00 C1Po3B-05: Simulation experiment of vacuum insulation deterioration in liquid hydrogen tank due to minute air leaks - Suguru Takada

14:00 C1Po3B-04: Development of the Cool Fuel School: a comprehensive hands-on cryogenic hydrogen design and safety program - Zachary Beadle (Washington State University)

14:00 C1Po3B-02: Impacts of temperature on nitrogen adsorption of common cryogenic purification materials - Ian Richardson (Plug Power)

14:00 C1Po3B-01: A comparison of the toxicity and asphyxiation risk during bunkering of LH2, LNG and NH3 by means of a quantitative risk assessment - Jorgen Depken (Institute for Maritime Energy Systems, German Aerospace Center (DLR), Dünebergerstraße 108, Geesthacht, 21502, Schleswig-Holstein, Germany)

14:00 C1Po3B-03: Numerical Simulation of the Protective Effectiveness of Bund Walls and the Impact of Key Parameters in Accidental Liquid Hydrogen Releases - Yanwei Liang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
14:00 - 16:00
Contributions

14:00 C1Po3C-03: Thermodynamic Analysis of Cold Energy Replenishment in Liquid Air Energy Storage System - Liubiao Chen

14:00 C1Po3C-06: Experimental investigation of CO2 desublimation characteristics in flue gas on horizontal copper plate influenced by surface temperature and CO2 concentration - Xinyu Lu (Zhejiang University)

14:00 C1Po3C-05: Investigation of cold energy transfer characteristics in the liquefaction unit of the liquid air energy storage system - Xiaoyu Fan (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 C1Po3C-04: Development of a 10 ton/day air liquefaction system for liquid air energy storage - Sehwan In (Korea Institute of Machinery and Materials)

14:00 C1Po3C-01: A study of the whole life cycle carbon emission of liquid air energy storage system - Zhaozhao Gao (Technical Institute of Physics and Chemistry)

14:00 C1Po3C-02: Ensuring High-Purity Liquid Argon for the LBNF FDC: Collaborative Cryogenics Research Between UNICAMP and Fermilab - Roza Doubnik (Fermilab)
14:00 - 16:00
Contributions

14:00 C1Po3D-06: Moved to C1Or4A-06

14:00 C1Po3D-09: Design and optimization of a Single-Phase heat exchanger for GM cryocooler coupled with parahydrogen conversion catalyst - Jihao Wu

14:00 C1Po3D-08: A review of the technology practice and future opportunities of liquid hydrogen centrifugal pumps - Jihao Wu

14:00 C1Po3D-01: Design and performance analysis: characteristics of multi-dimension helium turbine brake wheels based on CFX simulation - Changlei Ke (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China,)

14:00 C1Po3D-07: Design considerations for valve dynamics of a positive displacement cryogenic pump - Brandon Demski

14:00 C1Po3D-05: Simulation Research on the Transient Characteristics of the Helium Turbine Expander - Chenghao Dai (Institute of Plasma Physics, Hefei)

14:00 C1Po3D-04: Transient Heat Transfer in Superfluid Helium from Localized Heating Spots on Spherical Surfaces - Yingxuan Hu (Zhejiang University, Institute of Refrigeration and Cryogenics)

14:00 C1Po3D-03: Measurement of Apparent Thermal Conductivity of Insulation Materials at Cryogenic Temperatures - Zhijian Zhang (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 C1Po3D-02: Study on Helium Adsorption Properties of Carbon Nanotubes in the Liquid Helium Temperature Range Based on the Monte Carlo Method - Zhijian Zhang (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
14:00 - 16:00
Contributions

14:00 M1Po3A-02: Investigation of Leakage in Bi-2212 Rutherford Cables - Eric Hellstrom (Applied Superconductivity Center - NHMFL)

14:00 M1Po3A-01: Measurements of composite Bi-2212 Rutherford cable's mechanical properties. - Alessio D'Agliano (FNAL)

14:00 M1Po3A-04: Self-consistent solution of Eliashberg equations for metal hydride superconductors - Tomas Javier Escamilla Lara (Instituto de Investigaciones en Materiales, Universidad Nacional Autonoma de Mexico)

14:00 M1Po3A-03: The Effect of Calcium Doped Y-Ba-Cu-O (CaY123) Layer Thickness on the Flux Pinning in (CaY123 / BaZrO3 Doped Y-Ba-Cu-O) Multilayer Composite Films at a Wide Range of Temperatures and Applied Fields - Timothy Haugan
14:00 - 16:00
Contributions

14:00 M1Po3B-02: Mechanical characterization of pure Nb at cryogenic temperatures - Md Shakil Mahmood (School of Mechanical and Materials Engineering, Washington State University and Hydrogen Properties for Energy Research Center, Washington State University)

14:00 M1Po3B-05: Inconel 625 flange development for Cu-based superconducting radio frequency cavities - Adam O'Brien (The Thomas Jefferson National Accelerator Facility)

14:00 M1Po3B-04: Assessing the Adhesion of Nanofibrous PVDFHFP as Passive Thermal Control Coatings for the Extraterrestrial Storage of Cryogenic Propellants - Chieloka Ibekwe

14:00 M1Po3B-03: Mechanical Properties of Stainless-Steel co-wind Tapes for REBCO magnets - Aniket Ingrole (National High Magnetic Field Laboratory (NHMFL), Florida State University)

14:00 M1Po3B-01: Fatigue analysis of Stirling cryocooler flexure springs for long space mission lifetime - Raymond Feng (Center for Astrophysics | Harvard & Smithsonian)
14:00 - 16:00
Contributions

14:00 M1Po3C-01: The Design and Manufacturing of Superconducting Undulator Magnets Utilizing Additive Manufacturing & Plastic Components. - Ethan Anliker

14:00 M1Po3C-02: Structural analysis and field mapping test setup of the quadrupole triplet magnet for HRS project - Hengkang Zheng (Michigan State University)

14:00 M1Po3C-03: Thermal Modeling of CCT Dipole Magnets wound using Defected REBCO Cables - Milan Majoros

14:00 M1Po3C-04: Researches on Superconducting Magnetic Drivers - Guomin Zhang (Institute of Electrical Engineering，Chinese Academy of Sciences)
14:00 - 16:00
Contributions

14:00 M1Po3D-01: Cryogenic properties of polyimide aerogel composites for thermal insulation - Shen Zhao (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 M1Po3D-03: Assessing the Feasibility of Adopting Molecular Dynamics in Designing Cryogenic Polymers - Shanaka Kristombu Baduge (The University of Melbourne)

14:00 M1Po3D-02: Formation of thermal conductive hydrogel network in boron nitride/polyvinyl alcohol by directional freezing assisted salting-out method for cryogenic application - Hongwei Zhang (State Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
15:00 Afternoon Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
Afternoon Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
15:00 - 15:30
16:15
16:15 - 17:45
Contributions

16:15 C1Or4A-01: Validating effective thermal conductivity of glass microspheres in cryogenic storage insulation via finite element analysis - Marc Dunham (3M)

16:30 C1Or4A-02: Development of a test apparatus for thermal conductivity measurements of insulation materials with adsorbed nitrogen between 20 and 77 K - Justin Jessop (Washington State University)

16:45 C1Or4A-03: A compact, exchangeable and fast-cooling cryogenic system for HTS antennas - Hongwei Zhang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

17:00 C1Or4A-04: Withdrawn

17:15 C1Or4A-05: Lumped-element modeling of density wave oscillations in two-phase hydrogen flow - Trinity Templeton

17:30 C1Or4A-06: Streamlined Heat Leak Estimation for Vacuum Jacketed Cryogenic Pump Assemblies - Chris Rista (Barber-Nichols LLC)
16:15 - 18:15
Contributions

16:15 C1Or4B-01: LBNF/DUNE Liquid Argon Roadmap - Matt Maciazka (Fermi National Accelerator Lab. (US))

16:30 C1Or4B-02: Overview and status of the Long-Baseline Neutrino Facility Far Detectors cryogenics system - David Montanari (Fermi National Accelerator Lab. (US))

16:45 C1Or4B-03: The Cryogenic System for the Mainz Energy-recovering Superconducting Accelerator (MESA) - Timo Stengler (Johannes Gutenberg-Universität Mainz)

17:00 C1Or4B-04: Design status of the second target station cryogenic moderator system - Jim Janney

17:15 C1Or4B-05: Withdrawn

17:30 C1Or4B-06: Design, fabrication and installation of the refurbished K500 cyclotron cryogenic distribution system for MSU chip testing facility - Nusair Hasan (Michigan State University)

17:45 C1Or4B-07: 2 Kelvin helium distribution system for the Electron Ion Collider’s 10 o’clock satellite refrigerator - A. Rizzato (Thomas Jefferson National accelerator facility) N. Laverdure (Thomas Jefferson National accelerator facility)

18:00 C1Or4B-08: Progress on design and construction of a new Helium liquefaction system at LBL - Li Wang (Lawrence Berkeley National Lab)
16:15 - 18:00
Contributions

16:15 C1Or4C-01: Validating a thermodynamic model for self-pressurization in liquid hydrogen tanks using novel tank trailer data - Christian Wolf (Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Garching/Germany; Linde GmbH, Clean Energy Technologies R&D, Pullach/Germany)

16:30 C1Or4C-02: Comparison of liquid hydrogen tank performance at different storage pressures and operational scenarios using a reduced-order model - Kyle Appel (Washington State University)

16:45 C1Or4C-03: On the Thermodynamic Boundaries of Cryogenic Liquid Storage in Closed Containers - Thomas Just (Technische Universität Dresden)

17:00 C1Or4C-04: Towards Economic Zero Boil-Off Technology for Liquid Hydrogen Storage - Harro Beens

17:15 C1Or4C-05: Development of novel non-vacuum insulation system for large-scale liquid hydrogen storage applications - Kun Zhang (Shell) Neeharika Rajagiri (Shell)

17:30 C1Or4C-06: Thermal and Structural Modification to Repurpose Existing Full Containment (FCT) Liquified Natural Gas (LNG) Tanks for Liquid Hydrogen (LH2) Storage - Shanaka Kristombu Baduge (The University of Melbourne) Amila Premakumara (Graduate researcher)

17:45 C1Or4C-07: Experimental Study on Thermodynamic Performance and Lossless Storage of a Vehicle-Mounted Horizontal LH2 Tank - Chuancong Wan (Zhejiang University)
16:15 - 17:45
Contributions

16:15 M1Or4A-01: [Invited] Thermal Conductivity of Polymer Aerogels at Different Vacuum Levels for Cryogenic Insulation Applications - Ryan Ehresman (LeTourneau University)

16:45 M1Or4A-02: Composite cryogenic hydrogen insulated lightweight lined storage (C-CHILL) - Sascha Stevens (Dynovas)

17:00 M1Or4A-03: [Invited] Quantifying the relation between strain energy release rate and heat generated in the CTD-101K epoxy resin magnet impregnant at cryogenic temperatures - Herman ten kate (University of Twente)

17:30 M1Or4A-04: Elimination of Training in Nb3Sn and NbTi Superconducting Magnets - Elena Tamagnini
Tuesday 20 May 2025

07:45 Slides with Friends
Slides with Friends
07:45 - 08:00
08:00
08:00 - 09:00
Contributions

08:15 M2PL1-01: The National MagLab and Unsolved Mysteries in Superconductors - Laura Greene (Florida State University)
09:00 CRYO EXPO Open
CRYO EXPO Open
09:00 - 16:00
09:15
09:15 - 11:00
Contributions

09:15 C2Po1A-08: Analysis of unbalance response of the rotor of a typical cryogenic turbine for helium refrigerator under thermal effect - Chenghao Dai (Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences)

09:15 C2Po1A-07: Pre-design and efficiency analysis of electric generator brake cryogenic helium turbine expender - Chenghao Dai (Hefei Institutes of Physical Science, Chinese Academy of Sciences, University of Science and Technology of China)

09:15 C2Po1A-06: Basic design of a 17 kW orifice type heater for the ESS cryogenic moderator system - Hideki Tatsumoto (European Spallation Source ERIC (ESS))

09:15 C2Po1A-04: Optimizing nozzle-impeller coupling to enhance efficiency in hydrogen Turbo-Expanders - Yanan Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C2Po1A-03: Design and development of a control valve plug for precise control and measurement of cryogenic flow - Austin Grake (Michigan State University)

09:15 C2Po1A-02: Research on Optimization Strategies for Heat Switches Based on Helium Adsorption Models - Yannan Li (中国科学院大学理化技术研究所) Zhengkun Li (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C2Po1A-09: Development of the linear Compressor of 152Hz Micro Pulse Tube Cryocooler - Yuhong Zhang (中国科学院理化技术研究所)

09:15 C2Po1A-05: Performance assessment of liquid hydrogen pump for the ESS cryogenic moderator system during initial commissioning using helium - Theodoros Vasilopoulos (European Spallation Source ERIC)

09:15 C2Po1A-01: Experimental Study on the Cavitation Characteristics of a Centrifugal Pump in Liquid Helium - Johannes Doll (TU Dresden)
09:15 - 11:00
Contributions

09:15 C2Po1B-04: PIP-II Cryogenic Distribution System – status and outlook - Ram Dhuley (Fermi National Accelerator Laboratory)

09:15 C2Po1B-02: The SCL3 linac operation and improvements following RAON's 2nd beam commissioning - MinKi Lee (Institute for Basic Science)

09:15 C2Po1B-01: LHC cryogenic system adaptation and recovery after a major insulation vacuum breakage in a final focusing superconducting magnet in 2023 - Benjamin Bradu (CERN)

09:15 C2Po1B-06: Introduction to the protection system for RAON cryogenic system - Seojeong Kim (Institute for Basic Science)

09:15 C2Po1B-05: Operational experience of QWR cyromodules for RAON - Youngkwon Kim (Institute for Basic Science)

09:15 C2Po1B-03: Design of the Tunnel Transfer line of PIP-II Cryogenic Distribution System - Vrushank Patel (Fermi National Accelerator Laboratory)
09:15 - 11:00
Contributions

09:15 C2Po1C-06: Helium recovery system at IB3a - Dominika Porwisiak (Fermi National Accelerator Laboratory)

09:15 C2Po1C-02: Development of a moisture removal device for helium cryogenic plants - Feng-Zone Hsiao (National Synchrotron Radiation Research Center) Hsing-Chieh Li

09:15 C2Po1C-05: Integration and commissioning experience of Full Flow Purifier at Muon Campus - Jeewan Subedi

09:15 C2Po1C-04: Cryogenic purification of low purity helium with temperature swing adsorption and membrane separation - Cody Wilson (Ability Engineering Technology)

09:15 C2Po1C-03: Changes in cooling strategies from 2005 to 2025 at temperatures from 3 K to 25 K using He or H2 as coolants - Michael Green

09:15 C2Po1C-01: Helium inventory and losses in DALS after several cooldowns - He Sheng (Insititute of Advanced Science Facilities, Shenzhen)
09:15 - 11:00
Contributions

09:15 C2Po1D-04: Experimental Investigation and Performance Evaluation of Catalysts-Filled Plate-Fin Heat Exchangers for Hydrogen Liquefaction - Junjie Teng (Zhejiang University)

09:15 C2Po1D-05: Test platforms for ortho-para hydrogen conversion at cryogenic conditions - Xinyu Wei (zhejiang university) Junjie Teng (Zhejiang University)

09:15 C2Po1D-06: Design and Optimization of Efficient Catalyst-filled Spiral Wound Heat Exchangers for Large-Scale Hydrogen Liquefaction Systems - Hanwei Zhang

09:15 C2Po1D-03: Screening of ortho-parahydrogen catalysts - Sebastian Eisenhut

09:15 C2Po1D-02: Improving the activation of ortho-para hydrogen conversion catalysts for hydrogen liquefaction: Effects of pre-treatment on the performance of Ionex OP - Thomas J Hughes (Monash University)

09:15 C2Po1D-01: Magnetic field acceleration of catalyzed para- to orthohydrogen conversion for cooling superconducting motors - Thomas J Hughes (Monash University)
09:15 - 11:00
Contributions

09:15 C2Po1E-08: Design and Development of EPICS-based 6kW Helium Cryogenic Control System - Xiaofei Lu (中国科学院等离子体物理研究所)

09:15 C2Po1E-07: Real time heat load calculation software based on EPICS for Fermilab PIP-II CM tests - Sungwoon Yoon (Fermilab)

09:15 C2Po1E-06: More advancements with CCE pre-integration and automated PI tuning - Kristin Malenfant

09:15 C2Po1E-05: Helium Flow Meter for Measuring SRF Cavity Power Dissipation - Kevin Jordan (Jefferson Science Associates)

09:15 C2Po1E-04: Commissioning and Initial Operations of the ESS Linac Cryomodules Cryogenic Controls: Achievements and Future Prospect - Adalberto Ferreira Melo Fonotura (ESS ERIC)

09:15 C2Po1E-03: Digital twin for the CRAFT helium cryogenic plant - Qiang Yu (Institute of Plasma Physics, Chinese Academy of Sciences)

09:15 C2Po1E-02: Cernox® Cryogenic Temperature Sensor Performance after High Level Neutron Irradiation - Scott Courts (Lake Shore Cryotronics, Inc.)

09:15 C2Po1E-01: Irradiation tests of 3/2-way piezo valves at CERN - Nikolaos Chatzipapas (CERN)
09:15 - 11:00
Contributions

09:15 C2Po1F-06: Model development and optimization of cryogenic mixed-refrigerant cycles with phase separators - Jakob Reichert (Karlsruhe Institute of Technology (KIT))

09:15 C2Po1F-05: Conceptual design of a replacement 2.1 K cold box for the Spallation Neutron Source Central Helium Liquefier - Brian Mastracci (Thomas Jefferson National Accelerator Facility)

09:15 C2Po1F-04: Numerical study of liquid medium based packed bed cold storage in liquid air energy storage system - Junxian Li (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C2Po1F-03: RAMI analysis of 6kW helium refrigerator system - Jialong Ye

09:15 C2Po1F-02: Modeling and Dynamic Simulation for the Cold Box of 6kW Helium Refrigerator - Xiaofei Lu

09:15 C2Po1F-01: Dynamic simulation and automatic control strategy design for the compressor system of 6kW Helium refrigerator - Xiaofei Lu
Morning Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
Morning Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
09:15 - 09:45
09:30
09:30 - 11:00
Contributions

09:30 M2Or1A-01: [Invited] Detection of Local Obstacles in Long REBCO Coated Conductors with Introduction of Machine Learning Based Analysis in High-Speed Reel-to-Reel Magnetic Microscopy - Takanobu Kiss

10:00 M2Or1A-02: Critical transverse loading limits of REBCO CORC©-like cables for fusion - Arend Nijhuis (University of Twente)

10:15 M2Or1A-03: Integrated Platform for 2D Reel-to-Reel Characterization of 2G-HTS Superconductor Combining Raman Spectroscopy, Color Machine Vision, and Curvature Profiling - Nathaly Andrea Castaneda Quintero (University of Houston)

10:30 M2Or1A-04: FEM and Modelica Modelling of Current Sharing in Tape Stack Cables; Influence of ICR, ITR, Defect Number, Defect Patterns, and Thermal Boundary Conditions - Minzheng Jiang

10:45 M2Or1A-05: Nuclear transmutation effect by thermal neutron on degradation in superconductivity of ReBCO tapes - Arata Nishimura (National Institute for Fusion Science)
11:15
11:15 - 12:00
Contributions

11:15 C2Or2A-01: BAE Hybrid Cryocooler Solution for the ESA Athena Mission - Ryan Taylor (BAE Systems Inc.)

11:30 C2Or2A-02: Withdrawn

11:45 C2Or2A-03: Closed Loop He3 JT Stage Performance Demonstration - Weibo Chen
11:15 - 12:45
Contributions

11:15 C2Or2B-01: [Invited] Design and Development of a State-of-the-Art Cryogenic Testing Platform for Liquid Hydrogen Applications - Shanaka Kristombu Baduge (The University of Melbourne)

11:30 C2Or2B-02: [Invited] Airbus Structures Test - Cryogenic Test Capability Development - Harina Amer Hamzah (Airbus Operations UK Ltd)

11:45 C2Or2B-03: [Invited] A vertically integrated cryogenic hydrogen testing laboratory - Jacob Leachman

12:00 C2Or2B-04: [Invited] The Development of a Liquid Hydrogen Test Capability for Aviation and Beyond as a US National Asset - Wesley Johnson (NASA Glenn Research Center)

12:15 C2Or2B-05: Panel Discussion
11:15 - 12:30
Contributions

11:15 C2Or2C-01: Analysis of quench safety and cryogenic energy recovery for FRIB High Transmission Beam Line magnets - Nusair Hasan (Michigan State University)

11:30 C2Or2C-02: Advancing 1D thermo-hydraulic tools for large cryogenic facilities - Romain Bruce (Fermilab)

11:45 C2Or2C-03: Modelling two-phase He II flow for heat load limits in EuXFEL cryomodules for CW operation - Aman Kumar Dhillon (Deutsches Elektronen-Synchrotron DESY)

12:00 C2Or2C-04: System-scale dynamic simulation of the 400W@1.8 K Test facility at CEA Grenoble: experimental validation on steady state and transient configurations (towards new applications) - Jérôme Pouvreau (Univ. Grenoble Alpes, CEA, IRIG, DSBT)

12:15 C2Or2C-05: Development of a simulation code for analyzing pressure and temperature fluctuations in the J-PARC cryogenic moderator system - Hideki Tatsumoto (European Spallation Source ERIC (ESS))
11:15 - 12:45
Contributions

11:15 M2Or2A-01: Numerical and Experimental Investigation of Deformation Induced Martensitic Transformation in Fused Filament Fabricated Austenitic Stainless Steel for Cryogenic Applications - Daniela Schob

11:30 M2Or2A-02: Electromagnetic properties of austenitic stainless steels in cryogenic, high magnetic field environments - Polina Ermoshkina (Commonwealth Fusion Systems)

11:45 M2Or2A-03: Low-Temperature Fatigue and Fracture Properties of Maraging C250 Steel - Robert Walsh (Materials Reliability Inc.)

12:00 M2Or2A-04: First Approximation for Unified Fatigue Models for 316 Stainless Steel and IN718 Materials at 4K, 77K & 293K from Monotonic Material Properties - Raymond Kersey (Advanced Fracture Mechanics Associates LLC)

12:15 M2Or2A-05: In-Situ Monitoring of Strain Field Evolution and Dissipative Effects at Cryogenic Temperatures (77K): Insights into Advanced Materials for Superconducting and Hydrogen Storage Applications - Jakub Tabin (Institute of Fundamental Technological Research PAS)

12:30 M2Or2A-06: In-Situ and In-Operando Monitoring of Laser and Electron Beam Welding Processes for Austenitic Stainless Steels - Boyd Panton (The Ohio State University)
14:00
14:00 - 16:00
Contributions

14:00 C2Po3A-02: Cryogenic Performance in Factory Acceptance Testing of the Material Plasma Exposure eXperiment (MPEX) Magnet System - Robert Duckworth

14:00 C2Po3A-04: Cryogenic Cooldown Performance of the GE (HTIC) Compact 7 T MRI Magnet - Vijay Soni (GE HealthCare Technology and Innovation Center, Niskayuna, NY 12309, USA)

14:00 C2Po3A-06: Thermal design of conductive superconducting magnet for MRI system with thermal buffer - Jian Li (SIEMENS Shenzhen Magnetic Resonance Ltd.)

14:00 C2Po3A-03: Thermal analysis of a HTS magnet with effects of magnet field - Yong-Ju Hong (Korea Institute of Machinery & Materials)

14:00 C2Po3A-01: Heat load measurements for the PIP-II pHB650 cryomodule - Dominika Porwisiak (Fermi National Accelerator Laboratory)
14:00 - 16:00
Contributions

14:00 C2Po3B-05: Numerical estimation of pressure drop of subcooled parahydrogen flow in the ESS Cryogenic Moderator System. - Hideki Tatsumoto (European Spallation Source ERIC (ESS))

14:00 C2Po3B-03: Results of fundamental operational function tests for the ESS cryogenic moderator system during preliminary commissioning with helium - Theodoros Vasilopoulos (European Spallation Source ERIC)

14:00 C2Po3B-02: Verification and optimization of cooldown operation mode for the ESS cryogenic moderator system during preliminary commissioning using helium - Theodoros Vasilopoulos (European Spallation Source ERIC)

14:00 C2Po3B-04: Thermal fluctuation mitigation in the ESS cryogenic moderator system induced by proton beam injection or trip: cooling power control in Preliminary commissioning - Hideki Tatsumoto (European Spallation Source ERIC (ESS))

14:00 C2Po3B-01: CRMF Cryogenic System Overview - Biren Rama
14:00 - 16:00
Contributions

14:00 C2Po3C-04: Small Scale Joule Thomson Hydrogen Liquefaction – A Comparison of Two Liquefaction Cycles - Henrik-Gerd Bischoff (Technische Universität Dresden)

14:00 C2Po3C-01: Thermodynamic and mechanical properties of solid-phase media for moving cryogenic energy storage packed beds - Zhaozhao Gao (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 C2Po3C-03: Quantum computer cryogenic cooling system - Marco Roveta

14:00 C2Po3C-02: Machine Learning Methods for Cryocooler Performance Optimization and Failure Prediction - Hannah Rana (Center for Astrophysics | Harvard & Smithsonian)
14:00 - 16:00
Contributions

14:00 C2Po3D-08: Advances in small scale cryogenic magnetic refrigeration - Robin Ihnfeldt (General Engineering & Research LLC)

14:00 C2Po3D-09: A Liquid Air Energy Storage (LAES) System Utilizing Upgraded LNG Cold Energy for Air Liquefaction - Jiamin Du (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 C2Po3D-03: A deployable barrier preventing liquid oxygen accumulation and safety risks during liquid hydrogen transfers - Kyle Appel (Washington State University) Matthew Shenton (Washington State University)

14:00 C2Po3D-01: Design, manufacturing & commissioning of the high brightness liquid para-hydrogen moderator for the European Spallation Source - Yannick Bessler (Forschungszentrum Juelich GmbH)

14:00 C2Po3D-07: An integrated tool for helium recovery and evaporative cooling - Dogan Celik (GE Healthcare)

14:00 C2Po3D-06: The New Valve Era for Cryogenics– Design Considerations and Electric Solutions with focus on liquified Hydrogen and Helium - Leire Colomo Zulaica (AMPO POYAM VALVES)

14:00 C2Po3D-05: Federated Learning Framework to support AI-Driven Prescriptive Maintenance in Large-Scale Cryogenic Infrastructures at CERN - Paolo Cacace (Sapienza Universita e INFN, Roma I (IT))

14:00 C2Po3D-04: Catalytic materials for ortho-parahydrogen conversion in a thermoacoustic cryocooler regenerator - Matthew Shenton (Washington State University) Nathan Jorgensen (Washington State University)

14:00 C2Po3D-02: Experimental results from the cryogenic cooling of a rotor using an internal pump - Alan Caughley (Callaghan Innovation)
14:00 - 16:00
Contributions

14:00 M2Po3A-02: Characterization of 850 nm Power Over Fiber Converter at Cryogenic Temperatures - Lukas Graber (Georgia Institute of Technology)

14:00 M2Po3A-04: Higher order topology in hydrogenated graphite - Nadina Gheorghiu (Previously with AFRL)

14:00 M2Po3A-01: Ultrafast Optically Pulse Triggered Microwave/Terahertz Emission from an Array of Inductively Charged Superconducting Rings - Tom Bullard (Bluehalo)

14:00 M2Po3A-03: Low-Temperature Energy Storage: Flexible Supercapacitors with Cotton Fiber and Silver Nanowires - Si-Zhe Li (Technical Institute of Physics and Chemistry, CAS)
14:00 - 16:00
Contributions

14:00 M2Po3B-06: Electrical Conductivity Measurements of Pressurized Gaseous Helium at 77 K - Peter Cheetham

14:00 M2Po3B-05: Design and development of near field emissivity measuring device for superconducting materials - Bixi Li (Technical Institute of Physics and Chemistry)

14:00 M2Po3B-04: Experimental assessment of the parasitic thermal load on cryogenic envelope for superconductive cables - Giovanni Mangiulli (Politecnico di Torino)

14:00 M2Po3B-03: Magnetoresistance analysis and calibration of zirconium oxynitride sensor for low-temperature thermometry - Zhicong Miao

14:00 M2Po3B-01: Development of a thermal conductivity test bench at cryogenic temperatures - Oscar Sacristan De Frutos (CERN)

14:00 M2Po3B-07: Force Measurements for Axial Superconducting Magnetic Bearing - Himanshu Bahirat (IIT Bombay)

14:00 M2Po3B-02: Design and uncertainty analysis of cryogenic spectral emissivity measurement system - Zichun Huang (Technical Institute of Physics and Chemistry)
14:00 - 16:00
Contributions

14:00 M2Po3C-05: Progress of APC and high Cp Nb3Sn conductors in Hyper Tech - Xuan Peng

14:00 M2Po3C-04: Characterization of NbTi wires for the electron-ion collider project - Jun Lu (National High Magnetic Field Laboratory, USA)

14:00 M2Po3C-03: Impact of retained cold work on the microstructure and fabrication of SRF Nb cavities - Santosh Chetri (Applied Superconductivity Center, NHMFL, FSU)

14:00 M2Po3C-01: Investigating the microstructure of cold-worked and annealed SRF Niobium using Shannon Entropy - Trent Boritz (Florida State University)

14:00 M2Po3C-02: Enhancing Flux Expulsion Through Microstructural Control in Superconducting Radiofrequency Cavities Made from Cold-Worked Niobium - Santosh Chetri (Applied Superconductivity Center, NHMFL-FSU, Tallahassee)
14:00 - 16:00
Contributions

14:00 M2Po3D-02: Modelica Modelling of HTS Dipole Magnet windings, and the influence of cable defects on Thermal and Electrical Sharing in the Cross Section - Minzheng Jiang

14:00 M2Po3D-04: AC loss models of standard and non-standard arrangements of Y-Ba-Cu-O tapes in stacks - George Y. Panasyuk (NRC Senior Researcher)

14:00 M2Po3D-03: Modeling and Analysis of Magnetization in ReBCO Coated Tape Conductor and Helical Wound Tape Conductors - Tushar Garg (The Ohio State University)
14:00 - 16:00
Contributions

14:00 M2Po3E-05: Measurement of Transverse Resistance for Stacks of Non-insulated REBCO Tapes - Elena Tamagnini (Politenico di Torino)

14:00 M2Po3E-04: Friction Coefficient Measurements for High-Temperature Superconducting Magnet Design - Aniket Ingrole (National High Magnetic Field Laboratory (NHMFL), Florida State University)

14:00 M2Po3E-01: Thermal and Mechanical Characterization of REBCO HTS Tapes and Stacks for Magnet Design in the Muon Collider Study - Michael Guinchard (CERN)

14:00 M2Po3E-03: Mechanical characterization and critical current irreversibility limit of different ReBCO tapes - A. Nijhuis (University of Twente, Faculty of Science & Technology, Enschede, The Netherlands)

14:00 M2Po3E-02: Contact resistance effect on current sharing in defected superconducting REBCO tape stack cables: FEM modeling - Milan Majoros
15:00 Afternoon Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
Afternoon Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
15:00 - 15:30
16:15
16:15 - 17:00
Contributions

16:15 C2Or4A-01: Design of satellite cryogenic plants for the Electron-Ion Collider at Brookhaven National Lab - Blaine Wissler (Jefferson Lab)

16:30 C2Or4A-02: New Helium Refrigerator for Institute of High Energy Physics - Jean-Marc Bernhardt (Air Liquide Advanced Technologies)

16:45 C2Or4A-03: Performance of the 2K cryogenic refrigerators for SHINE - Yannick Fabre
16:15 - 18:00
Contributions

16:15 C2Or4B-01: The Use of Temperature Sensors for Liquid Hydrogen Testing at NASA Glenn Research Center - Wesley Johnson (NASA Glenn Research Center)

16:30 C2Or4B-02: Cernox® versus germanium cryogenic temperature sensor stability comparison over the 1 K to 27 K temperature range - Scott Courts (Lake Shore Cryotronics, Inc.)

16:45 C2Or4B-03: Particle Levitation Velocimetry for boundary layer measurements in high Reynolds number liquid helium turbulence - Yinghe Qi (National High Magnetic Field Laboratory, FSU)

17:00 C2Or4B-04: Accelerator cavity quench spot detection using particle tracking velocimetry - Yousef Alihosseini (Mechanical Engineering Department, FAMU-FSU College of Engineering, Florida State University, Tallahassee, FL 32310, USA National High Magnetic Field Laboratory, 1800 East Paul Dirac Drive, Tallahassee, FL 32310, USA)

17:15 C2Or4B-05: Replacement and expansion of the cryogenic control system for the Electron Ion Collider at Brookhaven National Laboratory - Patrick Talty (Brookhaven National Laboratory)

17:30 C2Or4B-06: Fermilab PIP-II CDS & CM Cryogenic Controls System - Pratik Patel (Fermilab)

17:45 C2Or4B-07: The design of a flow boiling visualization experiment for liquid hydrogen - Ian Wells
16:15 - 18:00
Contributions

16:15 C2Or4C-01: Development of a two-phase, variable nozzle jet-pump for pressure control in liquid hydrogen systems - Yulia Gitter (Washington State University HYPER Lab)

16:30 C2Or4C-02: Design and testing of a submersible laboratory-sized cryogenic liquid hydrogen pump - Henrik-Gerd Bischoff (Technische Universität Dresden)

16:45 C2Or4C-03: Lightweight, high-flow valve for cryogenic propellant management on aircraft and spacecraft - Lucas O'Neill (Creare LLC)

17:00 C2Or4C-04: Enhanced Power Control and Maintenance-Free Turbine Retrofit in a Cryogenic Hydrogen Process for Tritium Removal - Johannes Schreiber (Linde Kryotechnik AG)

17:15 C2Or4C-05: Development and validation of a 1D oil-injected screw compressor model for helium cryogenic system applications - Scott Anthony (Michigan State University)

17:30 C2Or4C-06: Modeling and Analysis of Graded Heat Exchangers for Cryogenic Power System of Electric Aircraft Using the AeroCryoX - Chul Han Kim (FAMU-FSU College of Engineering)

17:45 C2Or4C-07: Gas bearing turbo compressor and expander technology for cryogenic applications - Martin Bartholet (Celeroton AG) Patrik Fröhlich (Celeroton AG)
16:15 - 17:45
Contributions

16:15 C2Or4D-01: Investigation of chill-down process of cryogenic tank - Seungwhan Baek

16:30 C2Or4D-02: Efficiency of CryoFILL Liquefaction Tests - Ali Kashani (ASRC Federal)

16:45 C2Or4D-03: Development of a method for estimating tank internal conditions during cryogenic fluid filling - Shin Sakai (The University of Tokyo)

17:00 C2Or4D-04: Cryogenic droplet-spray impact and rewetting dynamics in tank chilldown applications - Bhushan Patil (School of Mechanical, Aerospace and Manufacturing engineering, University of Connecticut)

17:15 C2Or4D-05: Cryogenic Two-Phase Flow Boiling Correlations for Terrestrial and Reduced Gravity - Jason Hartwig

17:30 C2Or4D-06: Electrospun Polyvinylidene fluoride co-hexafluoropropylene (PVDF-HFP) for Passive Thermal Management in Space - Chieloka Ibekwe (Rensselaer Polytechnic Institute)
16:15 - 18:15
Contributions

16:15 M2Or4A-01: [Invited] Pratt and Whitney’s HySIITE concept: a novel aircraft engine enabled by liquid hydrogen - Jacob Snyder

16:35 M2Or4A-02: [Invited] Current Status of Development of Fully Superconducting Propulsion Systems for Aircrafts in Japan - Masataka Iwakuma

17:05 M2Or4A-03: [Invited] The “IZEA-light” zero-emission aviation conceptual design - Lance Cooley (NHMFL/FSU)

17:35 M2Or4A-04: [Invited] Overview and Progress Update on a Superconducting Powertrain for CHEETA - Thanatheepan Balachandran (HInetics Inc)

17:55 M2Or4A-05: [Invited] Motor configuration selection for a new technical challenge to develop a 5 MW cryogenic motor and drive - Justin Scheidler (NASA Glenn Research Center)
16:15 - 18:15
Contributions

16:15 M2Or4B-01: [Invited] High quality FF-MOD REBCO films prepared from ready-made REBCO - Jun-ichi Shimoyama (Aoyama Gakuin University)

16:45 M2Or4B-02: Role of Ca diffusion in BaZrO3 nanorods/YBa2Cu3O7-x multilayer nanocomposite films - Judy Wu (University of Kansas)

17:00 M2Or4B-03: Charge carrier density and critical current density variations of superconducting layers of GdBCO and EuBCO coated conductors as a result of high pressure oxygenation - Tetiana Prikhna ((1) V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, (2) Institut de Ciencia de Materials de Barcelona, CSIC, (3) Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V.)

17:15 M2Or4B-04: Increased nonreciprocal current in iron-based superconductor antiferromagnet interface - Christopher Luth (The University of Texas at Austin)

17:30 M2Or4B-05: [Invited] Advances in iron-based superconductors for high-field applications - Chiheng Dong (Institute of Electrical Engineering, Chinese Academy of Sciences)

18:00 M2Or4B-06: Withdrawn
Wednesday 21 May 2025

07:45 Slides with Friends
Slides with Friends
07:45 - 08:00
08:00
08:00 - 09:00
Contributions

08:15 M3PL1-01: High Power Electrification in Aerospace and Defense Applications Enabled by Cryocooled Systems - Parag Kshirsagar (RTX Technology Research Center (RTRC))
09:00 CRYO EXPO Open
CRYO EXPO Open
09:00 - 11:00
09:15
09:15 - 11:00
Contributions

09:15 C3Po1A-04: Fabrication of the HFVMTF Double-Bath Cryostat - Romain Bruce (Fermilab)

09:15 C3Po1A-05: Cryogenic binary fluid test bench for studying transport phenomena - Srini Vanapalli (University of Twente)

09:15 C3Po1A-02: Operational experience of the NML cryogenic plant at the FAST facility - Tim Wallace (Fermilab)

09:15 C3Po1A-01: Cryogenic Testing of HL-LHC Q1/Q3 Cryo-Assemblies at Fermilab - Roger Jon Rabehl (Fermi National Accelerator Lab. (US))
09:15 - 11:00
Contributions

09:15 C3Po1B-05: Performance test and optimization of the control system for the ESS cryogenic moderator system - Attila Zsigmond Horváth (European Spallation Source)

09:15 C3Po1B-03: How digital twins can help with operator training, an example with ATLAS and CMS detector’s cryogenics at CERN - Lorenzo Luc Jimenez

09:15 C3Po1B-01: Visualization of film condensation onset and microscale cryogenic condensate film - Bhushan Patil (School of Mechanical, Aerospace and Manufacturing engineering, University of Connecticut)

09:15 C3Po1B-06: Development of the 17 kW orifice-type heater control system for thermal compensation induced by nuclear heating at the ESS hydrogen moderators - Attila Zsigmond Horváth (European Spallation Source)

09:15 C3Po1B-04: The cooling machnism of liquid nitrogen cooling system - Hsing-Chieh Li (National Synchrotron Radiation Research Center)

09:15 C3Po1B-02: Design of a test facility for evaluating liquid hydrogen fuel level probes - Sophia Abi-Saad (Self)
09:15 - 11:00
Contributions

09:15 C3Po1C-02: Numerical Simulation Study on the Precooling Process of a Propane Storage Tank in a Liquid Air Energy Storage System - Jiamin Du (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C3Po1C-08: Modeling of thermal performance in self-pressurized liquid helium tanks - Xiujuan Xie (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) Liang Guo (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, China) Ye Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, China) Wei Wu (Technical Institute of Physics and Chemistry,CAS) Qiming Jia (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) Shaoqi Yang

09:15 C3Po1C-04: Completion of vapor-liquid equilibrium measurements of the helium-neon system at temperatures below 36 K - Julian Schunk (Karlsruhe Institute of Technology (KIT))

09:15 C3Po1C-07: Study on the flow nucleate boiling heat transfer of slush nitrogen - Xinyu Lu (Zhejiang University)

09:15 C3Po1C-05: Experimental study on inclined two-phase flow cooling of multi-stranded aluminum cable - Yang Guo (The Ohio State University)

09:15 C3Po1C-03: Modeling of the Cryogenic Liquid Regasification Process with Consideration of Evaporation and Superheating - Ziemowit Malecha

09:15 C3Po1C-06: Three-dimensional simulations for evolving thermodynamic scaling laws in cryogenic cavitating fluid transients - Arjun Garva (Indian Institute of Technology Kharagpur, India)
09:15 - 11:00
Contributions

09:15 C3Po1D-09: Simulation Study on the Thermal Insulation Performance of Liquid Hydrogen Transport Pipelines - Yihan Tian (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C3Po1D-05: Fundamental insights into liquid hydrogen flow boiling: bubble dynamics and flow characteristic parameters - Shaolong Zhu (Zhejiang University)

09:15 C3Po1D-02: Performance improvement of a hydrogen condensation heat exchanger applying intermittent reciprocating flow - Tsuyoshi Shirai (University of Tsukuba)

09:15 C3Po1D-01: Simulation and experiment of a hydrogen pump with an integrated closed impeller - Ziwei Li

09:15 C3Po1D-08: Stress Distribution and Sealing Performance Analysis of Metal Sealing Joints in Liquid Hydrogen Pipelines - Yihan Tian (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C3Po1D-07: Optimization of liquid hydrogen tank-to-tank transfer: A comparative study of six transfer systems - Haoran Gan (Zhejiang University)

09:15 C3Po1D-06: Dynamic Characteristics of Transfer Processes in Port-Based Liquid Hydrogen Receiving Terminals - Xinyu Lu (Zhejiang University, CN)

09:15 C3Po1D-03: Top Load Cryogenic Large Size Ball Valves With Focus on Liquified Hydrogen and Helium - Ander Gabirondo (AMPO POYAM VALVES)
09:15 - 11:00
Contributions

09:15 C3Po1E-04: Design and testing of a tin superconducting heat switch for adiabatic demagnetization refrigerators - Zijie Pan (Technical Institute of Physics and Chemistry, CAS)

09:15 C3Po1E-03: Design and fabrication of CPA salt pill for adiabatic demagnetization refrigerator - Jangdon Kim (Changwon National University, Changwon, South Korea)

09:15 C3Po1E-02: Design of a Three-Stage Continuous Adiabatic Demagnetization Refrigerator for Ultra-Low Temperature Applications - Changhyung Lee (Changwon National University)
09:15 - 11:00
Contributions

09:15 C3Po1F-07: Thermal Control Units for Space Vacuum Chambers - Marco Roveta

09:15 C3Po1F-06: Development and projected capabilities of Chamber D - Stephen Baker (NASA Johnson Space Center)

09:15 C3Po1F-04: Study on Cryogenic Fluid Circulation Loops for Efficient Heat Transfer of Small Cooling Capacities in the 4-20 K Temperature Range - Liubiao Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C3Po1F-02: A 100 mW@4.0 K hybrid 4He Joule-Thomson cryocooler for space applications - Yuexue Ma (Technical Institute of Physics and Chemistry, CAS)

09:15 C3Po1F-01: Conceptual design of a lab-scale low-noise He-II liquefier using a pulse-tube cryocooler with a Joule-Thomson cycle - Timo Weckerle (Karlsruhe Institute of Technology (KIT))

09:15 C3Po1F-08: Power requirements and energy recovery in Stirling and pulse tube cryocoolers for space missions - Ojas Khadakban (Center for Astrophysics | Harvard & Smithsonian)

09:15 C3Po1F-05: Development and preliminary testing of cryogenic pump for TVS test - Isang Yu (korea aerospace research institute)

09:15 C3Po1F-03: Performance optimization of a 4K hybrid JT cooler for space application - Yuexue Ma (Technical Institute of Physics and Chemistry, CAS)
Morning Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
Morning Coffee Break -- brought to you by Sumitomo (SHI) Cryogenics of America, Inc.
09:15 - 09:45
09:30
09:30 - 10:30
Contributions

09:30 M3Or1A-01: Design and test of the HTS magnet of the robust and low maintenance magnetic billet heater “RoWaMag” - Sonja Schlachter (Karlsruhe Institute of Technology)

09:45 M3Or1A-02: Design, fabrication, and testing of the quadrupole triplet magnet for the HRS project - Xiaoji Du (Michigan State University)

10:00 M3Or1A-03: Simulations of a modified CLIQ System using Split MgB2 Coils and Simultaneous Joule Heating Using a Lumped Parameter Model - Xianhao Zhang

10:15 M3Or1A-04: Withdrawn
11:15
11:15 - 12:30
Contributions

11:15 C3Or2A-01: Integrated remote cooling system using a GM cryocooler - Joseph Koch (Sumitomo (SHI) Cryogenics of America Inc)

11:30 C3Or2A-02: Cryogenic helium circulation cooling system with high capacity GM Cryocooler - Eric Seitz (Sumitomo (SHI) Cryogenics of America, Inc.)

11:45 C3Or2A-03: Performance Test and Analysis of a High-Capacity Stirling Type Pulse Tube Cryocooler with Orthogonal Room Temperature Displacers - Shuai Chen (Lihan Cryogenics Co., Ltd.) Xiaotao Wang (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry)

12:00 C3Or2A-04: Numerical Investigation of Alternative Regenerators in Regenerative Cryocoolers Operating Below 20K - Wei Dai (Technical Institute Of Physics and Chemistry, Chinese Academy of Sciences) Zhengkun Li (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

12:15 C3Or2A-05: Comparison study on a large-scale free-piston Stirling cryocooler - Guoyao Yu
11:15 - 12:45
Contributions

11:15 C3Or2B-01: Development and verification of a steady-state operating methodology for wide-range operation of 2K cold compressor system - Jonathon Howard (Michigan State University)

11:30 C3Or2B-02: Development and verification of a transient operating methodology for pump-down operation of 2K cold compressor system - Jonathon Howard (Michigan State University)

11:45 C3Or2B-03: Optimising cryogenic solutions for STEP: addressing cooling challenges and enhancing energy efficiency - David Aliaga (UKAEA)

12:00 C3Or2B-04: Performance Testing of the 4kW ESR 2 Refrigerator at JLab - Christopher Perry (Thomas Jefferson National Accelerator Facility)

12:15 C3Or2B-05: Impact of Power Outage for Large scale cryogenic system operation - Swapnil Shrishrimal (SLAC National Accelerator Laboratory)

12:30 C3Or2B-06: Withdrawn
11:15 - 12:45
Contributions

11:15 M3Or2A-01: [Invited] The effects of monotonic and cyclic plastic strain at 4.2K on the electrical resistivity of bulk Al High Purity Aluminum” - Karl Hartwig

11:45 M3Or2A-02: Developing practical Cryogenic high purity aluminum (HPAL) conductor to enable high speed power density motors and generators. - Xuan Peng

12:00 M3Or2A-03: The Ultrafine Copper-Clad Super-High-Purity Aluminum Wires - Akihiro Kikuchi (National Institute for Materials Science)

12:15 M3Or2A-04: Investigating the impact of tensile stress-induced/annealing-affected dislocation and grain boundary on the performance of High Purity Aluminum Wire by EBSD. - Yang Guo (The Ohio State University)

12:30 M3Or2A-05: Impact of anomalous magnetoresistance and cyclic deformation on RR values of HPAL composites at low temperatures - Jin Kwon
14:00
14:00 - 15:15
Contributions

14:00 C3Or3A-01: Withdrawn

14:15 C3Or3A-02: Testbed for high current and high voltage characterization of gaseous helium cooled HTS power cables for electric transport systems - Paul Mensah

14:30 C3Or3A-03: Withdrawn

14:45 C3Or3A-04: INFN DarkSide-20k AAr cryogenic purification system - Marco Roveta

15:00 C3Or3A-05: Experimental investigation of moisture freeze-out in a cryogenic heat exchanger for helium purification - Nusair Hasan (Michigan State University)
14:00 - 16:00
Contributions

14:00 C3Or3B-01: High pressure burst tests at cryogenic temperatures - Eberhard Rosenthal

14:15 C3Or3B-02: Cryogenics in the drilling of deep, multi kilometer geothermal wells - Maciej Chorowski (Wrocław University of Science and Technology)

14:30 C3Or3B-03: A methodology for evaluating MEMS switch reliability at cryogenic temperatures - Peter Bradley (1National Institute of Standards and Technology, Colorado USA)

14:45 C3Or3B-04: Development of hydrogen-filled traveling-wave thermoacoustic engine for powering pulse-tube and traveling-wave refrigerators - Matthew Shenton (Washington State University)

15:00 C3Or3B-05: Large diameter helium pulsating heat pipe as promising thermal link for cryocooler-cooled superconducting magnet systems - Bertrand Baudouy (CEA Paris-Saclay)

15:15 C3Or3B-06: Compact nitrogen pulsating heat pipes – Experimental thermal analysis with numerical insights - Marcin Opalski (CEA Paris-Saclay, Wrocław University of Science and Technology)

15:30 C3Or3B-07: 50 Years of Innovation: Cryogenics and Superconductivity in Biomedical Applications - Quansheng Shu (Cryospc)

15:45 C3Or3B-08: Optimizing cryoprobe tip geometry for enhanced cryoablation efficacy: A numerical simulation approach - Arpit Mishra (Indian Institute of Technology Kharagpur, India)
14:00 - 14:45
Contributions

14:00 C3Or3C-01: ABI life test cryocooler system 2025 update - Harold Dzigiel (Northrop Grumman Corporation)

14:15 C3Or3C-02: Withdrawn

14:30 C3Or3C-03: Experimental research on a highly compact miniature coaxial pulse tube cryocooler at 80 K - Zhixiang Yang (浙江大学)
14:00 - 15:30
Contributions

14:00 C3Or3D-01: ITER Cryogenic System Commissioning and Performance Testing - Marie Cursan (ITER Organization)

14:15 C3Or3D-02: ITER LHe plants first tests results - Jean-Marc Bernhardt (Air Liquide Advanced Technologies) Yannick Fabre (Air Liquide)

14:30 C3Or3D-03: Analysis of a cryogenic refrigerator solution for the ITER Isotope Separation System - Matthias Dremel (Fusion for Energy)

14:45 C3Or3D-04: Overview of Design Developments for Condensable Vapor Devices for ITER - Ketan Choukekar (Oak Ridge National Laboratory)

15:00 C3Or3D-05: Withdrawn

15:15 C3Or3D-06: Performances of the JT-60SA cryogenic system in the integrated commissioning test - Kazuya Hamada (National Institutes for Quantum Science and Technology)
14:00 - 15:40
Contributions

14:00 M3Or3A-01: [Invited] Cryogenic Thermal Management of Power Conversion Devices on Liquid Hydrogen Fueled Electric Aircraft - Yai Pioth Yai Deng (Florida State University)

14:20 M3Or3A-02: [Invited] Liquid hydrogen cooling of superconducting motor AC windings - Grant Lumsden (Robinson Research Institute, Victoria University of Wellington)

14:40 M3Or3A-03: [Invited] Lightweight cryoresistive and superconducting aerospace power transmission cables: experiments and theory - Chris Kovacs (Scintillating Solutions LLC)

15:00 M3Or3A-04: [Invited] Cryogenic Bus Bar Design for Electric Aircraft Power Distribution - Muhammad Tahir Mehmood Khan Niazi (Florida State University)

15:20 M3Or3A-05: [Invited] A high power two-pole quick connect junction between lightweight cryoresistive and superconducting aerospace power transmission cables - Chris Kovacs (Scintillating Solutions LLC)
14:00 - 16:00
Contributions

14:00 M3Or3B-01: A low AC loss, fast ramp HTS solenoid prototype for compact fusion energy system - Yuhu Zhai (Princeton Plasma Physics Laboratory)

14:15 M3Or3B-02: AC Loss in Round, Multifilamentary Superconducting Strands at High Frequencies - Michael Sumption

14:30 M3Or3B-03: Test Results for the Commissioning of NASA’s AC Loss Superconducting Coil Test Rig - Jason Hartwig

14:45 M3Or3B-04: AC-loss Analysis in Stacks of Non-insulated REBCO Tapes - Elena Tamagnini (Politenico di Torino)

15:00 M3Or3B-05: Tradeoffs Curves and Penalty Functions for AC losses and Je relevant to high-power-density motor applications and their use in comparing various superconductors and normal metal conductors - Jin Kwon

15:15 M3Or3B-06: Flux Jumping in High Magnetic Fields for Stack Tape Cables and its Mitigation - Tushar Garg (The Ohio State University)

15:30 M3Or3B-07: Withdrawn

15:45 M3Or3B-08: Superconducting Coil Pack Manufacturing and Risk Reduction Testing for NASA’s AC Loss Test Rig - Justin Scheidler (NASA Glenn Research Center)
16:00 Grab & Go Coffee Break
Grab & Go Coffee Break
16:00 - 16:15
16:15
16:15 - 18:00
Contributions

16:15 C3Or4A-01: Upgrades and initial weathering test results of the liquefied natural gas testbed at NASA Kennedy Space Center - Adam Swanger (NASA)

16:30 C3Or4A-02: Novel concept of cryo-adsorbed hydrogen energy storage system - Nir Tzabar (Ariel University)

16:45 C3Or4A-03: Transient system-level cryogenic thermal management models of liquid hydrogen-fueled electric aircraft - Youngjun Choi (Florida State University)

17:00 C3Or4A-04: New design data for ortho-parahydrogen converters - Sebastian Eisenhut

17:15 C3Or4A-05: Process simulation and techno-economic assessment of hydrogen liquefaction plants with integrated ortho-para conversion - Laura Stops (Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Garching, Germany)

17:30 C3Or4A-06: Effect of sloshing conditions on the boil-off rate of cryogenic liquid in membrane tank - Le-Duy Nguyen (Korea Institute of Machinery and Materials)

17:45 C3Or4A-07: Fully submerged cryogenic fuel pump for LNG-powered vessels - Siri Kleivane
16:15 - 17:00
Contributions

16:15 C3Or4B-01: Operation of CERN’s major tests facility with upgraded cryogenic infrastructure for superconducting magnets, power links, inner triplets String and radio-frequency cavities for HL-LHC - Remi Mauny (CERN)

16:30 C3Or4B-02: Upgrade of the CERN cryogenic test facility for the HL-LHC superconducting magnets and superconducting links - Olivier Pirotte (CERN)

16:45 C3Or4B-03: Commissioning results of the ESS cryogenic moderator system using helium - Hideki Tatsumoto (European Spallation Source ERIC (ESS))
16:15 - 18:15
Contributions

16:15 C3Or4C-01: Characterization of SWaP COTS rotary coolers for space application - James Wade

16:30 C3Or4C-02: BAE Low Cost, High Capacity, Scalable Cryocooler Solutions - Ryan Taylor (BAE Systems Inc.)

16:45 C3Or4C-03: Reliability approach for high-availability cryocoolers - Jimmy Wade

17:00 C3Or4C-04: British (Ball) Aerospace Cryogenic Thermal Margins - Carlita Gorham (BAE Systems)

17:15 C3Or4C-05: Advances in Cryocooler Control Electronics for Linear Cryocoolers - Mark Zagarola (Creare LLC)

17:30 C3Or4C-06: BAE Modular Advanced Cryocooler Control Electronics (MACCE) - Ryan Taylor (BAE Systems Inc.)

17:45 C3Or4C-07: The road to 1K – Iris Technology’s continued development of high power CCEs - RJ Victoria (Iris Technology Corporation)

18:00 C3Or4C-08: Numerical investigation & optimisation of a small-scale travelling-wave thermoacoustic Stirling cryocooler - Holly Butson (Auckland University of Technology)
16:15 - 18:20
Contributions

16:15 M3Or4A-01: [Invited] 3D Numerical Modelling of AC Loss of Multifilamentary MgB2 Wires at 20 K - Zhenan Jiang (Victoria University of wellington)

16:45 M3Or4A-02: [Invited] A Double Rotor Flux Switching Machine with HTS Field Coils for All Electric Aircraft Applications - Timothy Haugan

17:05 M3Or4A-03: [Invited] Development of a 1 MW+ High power density induction motor for electric aircraft propulsion using Cryogenic Aluminum Windings - Michael Sumption

17:25 M3Or4A-04: [Invited] The thermal management of superconducting and aluminum conductors in motors, generators and cables for electric aircraft - Xuan Peng

17:45 M3Or4A-05: [Invited] Superconducting Electric Machine with Cryogenically Cooled Stator for CHEETA - Thanatheepan Balachandran (HInetics Inc)

18:05 M3Or4A-06: A sustainable flight demonstrator using a retrofit high-temperature superconducting (HTS) brushless DC motor in an RC plane - Ishan Ambastha (Greenwich High School)
16:15 - 18:15
Contributions

16:15 M3Or4B-01: [Invited] Quality assurance testing of materials for the 40 T superconducting magnet project - Jun Lu (National High Magnetic Field Laboratory, USA)

16:40 M3Or4B-02: [Invited] Composite materials for electrical insulation of superconducting coils - Vincent Schenk

17:05 M3Or4B-03: [Invited] Cryogenic Performance of Superconducting Magnet Structural Materials in SPARC - Dina Yuryev (Commonwealth Fusion Systems)

17:25 M3Or4B-04: [Invited] Cryogenic mechanical properties of large forgings for high field fusion magnets - Markus Kind (Rolf Kind GmbH)

17:50 M3Or4B-05: [Invited] Advancing Cryogenic Material Testing for High-Field Superconducting Magnets - Oscar Sacristan De Frutos (CERN)
19:00 Closing Reception
Closing Reception
19:00 - 21:00
Thursday 22 May 2025

07:45 Slides with Friends
Slides with Friends
07:45 - 08:00
08:00
08:00 - 09:00
Contributions

08:15 C4PL1-01: Securing America’s Helium Future: Pulsar’s Topaz Project and the Changing Landscape of US Helium Supply - Brad Cage (Pulsar Helium Inc.)
09:00 Grab & Go Coffee Break
Grab & Go Coffee Break
09:00 - 09:30
09:30
09:30 - 10:30
Contributions

09:30 C4Or1A-01: The first continuous sub-millikelvin refrigerator - Hiroshi Fukuyama (Cryogenic Research Center, The University of Tokyo)

09:45 C4Or1A-02: Space-oriented adiabatic demagnetization refrigerator adapted for quantum applications - Adele Leon (Univ. Grenoble Alpes, CEA, IRIG-DSBT, 38000 Grenoble, France)

10:00 C4Or1A-03: Research on temperature control of Adiabatic Demagnetization Refrigerators - Peng Zhao (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences; University of Chinese Academy of Sciences)

10:15 C4Or1A-04: Design and performance testing of the 3-stage ADR - Yanan Li (Technical Institute of Physics and Chemistry,Chinese Academy of Sciences)
09:30 - 11:30
Contributions

09:30 C4Or1B-01: [Invited] Fuel Cell-Based Hydrogen Aircraft Architecture - Vadim Lvovich (NASA Glenn Research Center)

09:45 C4Or1B-02: [Invited] NASA Cryogenic Fluid Management Portfolio Project – Overview and 2024-2025 Highlights - Jeremy Kenny

10:00 C4Or1B-03: [Invited] NASA Cryogenic Fluid Management Portfolio Project - Modeling and Technologies Portfolio Overviews - Erin Pisciotta

10:15 C4Or1B-04: [Invited] Cryocooler Technology Developments at NASA - Sean Kenny

10:30 C4Or1B-05: [Invited] NASA Cryogenic Fluid Management Portfolio Project’s Demonstrations Portfolio overview - Jeremy Kenny (NASA Marshall Space Flight Center)

10:45 C4Or1B-06: [Invited] NASA’s Human Landing Systems Program (HLS) Cryogenic Propulsion Systems Status and Overview - Juan Valenzuela (NASA) Reid Ruggles (NASA)

11:00 C4Or1B-07: Panel Discussion
09:30 - 11:00
Contributions

09:30 M4Or1A-01: [Invited] Supply Chain of REBCO and Bi-2212 conductors for high-field magnets - Lance Cooley (NHMFL/FSU)

09:50 M4Or1A-02: [Invited] REBCO Magnets for Fusion Propulsion - Honghai Song

10:20 M4Or1A-03: [Invited] AeroCryoX: A Comprehensive Library of Cryogenic Power System Component Models for Designing Electric Aircraft - M. Tahir Khan Niazi (FAMU-FSU College of Engineering)

10:40 M4Or1A-04: [Invited] Liquid Hydrogen for Sustainable Energy Systems: Latest Development, Challenges and Opportunities - David Mensah Sackey (FAMU-FSU College of Engineering, Department of Electrical & Computer Engineering)
09:30 - 10:45
Contributions

09:30 M4Or1B-01: Carbon-fiber Composite Cryogenic Tank for Liquid Hydrogen: Thermo-structural Analyses - Sreenivasa Voleti (RTX Technologies Research Center)

09:45 M4Or1B-02: Investigating the effect of cryogenic conditions on the elastic behaviour of fibre-reinforced polymer composite materials under tensile loading - Nassos Spetsieris (National Physical Laboratory)

10:00 M4Or1B-03: Piezometric properties of 3D-printed composites at cryogenic temperatures - Satyajit Mojumder (Washington State University)

10:15 M4Or1B-04: Thermal performance of common bulk-fill cryogenic insulation materials in helium and hydrogen background gasses - Adam Swanger (NASA)

10:30 M4Or1B-05: Investigating dual electrospinning as a means of enhancing passive thermal control coatings for cryogenic propellant storage in extraterrestrial environments - Adrien Neveu (Rensselaer Polytechnic Institute)