CHATS on Applied Superconductivity 2013

Contribution List

6. Process Analyses of ITER Toroidal Field Structure Cooling Scheme

Maekawa

09/10/2013, 09:00

7. Cross comparison of thermo-hydraulic analysis of the ITER magnets using two code systems

Gauthier

09/10/2013, 09:30

8. “Transverse heat transfer coefficient in the dual channel ITER TF CICCs. Part II. Analysis of transient temperature responses observed during heat slug propagation tests

Lewandowska

09/10/2013, 10:00

9. Artificial Neural Network (ANN) Modeling of the Pulsed Heat Load during ITER CS Magnet Operation

Savoldi - Richard

09/10/2013, 10:30

10. Simplified dynamic model of the heat loads on the ITER magnet system

Luongo

09/10/2013, 11:00

11. Application of the 4C code to the thermal-hydraulic analysis of the CS superconducting magnets in EAST

Zanino

09/10/2013, 11:30

12. Investigations about Helium Mass Expulsion and Heat Exchange Coefficients in CICCS: Predictive Analysis on Possible Experiments in HELIOS

Nicollet

09/10/2013, 12:00

13. Zero Dimensional Approach to Investigate the Thermal Stability of Superconducting Cables

Granieri

09/10/2013, 14:00

14. Experiment Proposal to Quantify the Thermal Response of Superconducting Cable Stacks to Pulse Heat Loads

Winkler

09/10/2013, 14:30

15. Analysis of stability margins of four ITER Central Solenoid conductor designs during a 15 MA plasma scenario with JackPot-ACDC

Nijhuis

09/10/2013, 15:00

16. Advances in Numerical Coding of Two Fluid HeII Model

Van Weelderen

09/10/2013, 15:30

17. Modeling of radio frequency heating and current drive in tokamaks in the ion cyclotron and lower hybrid frequency ranges. Massively parallel programming, integrated multiscale, multiphysics modelling

Wright

10/10/2013, 09:00

18. Quench modeling in accelerator magnets using a general-purpose code system

Bottura

10/10/2013, 10:00

19. A computer code for comprehensive analysis of quench in pool-cooled and adiabatic superconducting multi-coil magnets

Gravilin

10/10/2013, 10:30

20. Thermal and flow processes in cryogenic systems following failure modes combined with superconducting magnets resistive transitions

Chorowski

10/10/2013, 11:00

21. Influence of HTS Wire and Coil Configuration on Quench Propagation

Masson

10/10/2013, 11:30

22. First Experience with the New Coupling Loss Induced Quench System

Ravaioli

10/10/2013, 12:00

23. Hot spot temperature experiment for a cable-in-conduit conductor with thick conduit

Sedlak

10/10/2013, 12:30

24. QXF protection challenges, current analysis and key parameters/assumptions being used

10/10/2013, 14:30

25. New approaches to heater design, comparison with existing ones, and plans for validation in model magnets

10/10/2013, 15:00

26. An approximate electromagnetic model for superconducting helically wound cables and cable-in-conduit conductors

Rodriguez-Zermeno

10/10/2013, 15:30

27. Effect of combination of twist pitches on distribution of strands appearing on cable surface in CICC

Miyagi

10/10/2013, 16:00

28. A novel modeling of the critical current degradation of Nb3Sn PIT strand under transverse load based on Finite Element Analysis and strain scaling laws

Wang

10/10/2013, 16:30

29. 2G HTS Properties Beyond Critical Current

Hazelton

11/10/2013, 09:00

30. Numerical models of HTS for AC loss computation: how far do we need to go?

Grilli

11/10/2013, 09:30

31. Magnetization losses due to any combination of rotating and alternating fields in superconducting filaments driven by a power-law voltage-current behavior

Masson

11/10/2013, 10:00

32. Multi-pole components of magnetic field in small dipole magnets wound with coated conductors

N. Amemiya

11/10/2013, 10:30

33. Finite Element Investigation of HTS Tapes for Twisted Stacked-Tape Cabling Methods

N. Allen

11/10/2013, 11:00

34. Quench Protection for High Temperature Superconducting Magnets based on Fiber Optic Distributed Temperature Sensing

Chan

11/10/2013, 11:30