Process Analyses of ITER Toroidal Field Structure Cooling Scheme
Speaker:
Maekawa
Slides
2
Cross comparison of thermo-hydraulic analysis of the ITER magnets using two code systems
Speaker:
Gauthier
3
“Transverse heat transfer coefficient in the dual channel ITER TF CICCs. Part II. Analysis of transient temperature responses observed during heat slug propagation tests
Speaker:
Lewandowska
Slides
4
Artificial Neural Network (ANN) Modeling of the Pulsed Heat Load during ITER CS Magnet Operation
Speaker:
Savoldi - Richard
Slides
5
Simplified dynamic model of the heat loads on the ITER magnet system
Speaker:
Luongo
Slides
6
Application of the 4C code to the thermal-hydraulic analysis of the CS superconducting magnets in EAST
Speaker:
Zanino
Slides
7
Investigations about Helium Mass Expulsion and Heat Exchange Coefficients in CICCS: Predictive Analysis on Possible Experiments in HELIOS
Speaker:
Nicollet
Slides
8
Zero Dimensional Approach to Investigate the Thermal Stability of Superconducting Cables
Speaker:
Granieri
Slides
9
Experiment Proposal to Quantify the Thermal Response of Superconducting Cable Stacks to Pulse Heat Loads
Speaker:
Winkler
Slides
10
Analysis of stability margins of four ITER Central Solenoid conductor designs during a 15 MA plasma scenario with JackPot-ACDC
Speaker:
Nijhuis
Slides
11
Advances in Numerical Coding of Two Fluid HeII Model
Modeling of radio frequency heating and current drive in tokamaks in the ion cyclotron and lower hybrid frequency ranges. Massively parallel programming, integrated multiscale, multiphysics modelling
Speaker:
Wright
Slides
13
Quench modeling in accelerator magnets using a general-purpose code system
Speaker:
Bottura
Slides
14
A computer code for comprehensive analysis of quench in pool-cooled and adiabatic superconducting multi-coil magnets
Speaker:
Gravilin
Slides
15
Thermal and flow processes in cryogenic systems following failure modes combined with superconducting magnets resistive transitions
Speaker:
Chorowski
Slides
16
Influence of HTS Wire and Coil Configuration on Quench Propagation
Speaker:
Masson
Slides
17
First Experience with the New Coupling Loss Induced Quench System
Speaker:
Ravaioli
Slides
18
Hot spot temperature experiment for a cable-in-conduit conductor with thick conduit
Speaker:
Sedlak
Slides
19
QXF protection challenges, current analysis and key parameters/assumptions being used
20
New approaches to heater design, comparison with existing ones, and plans for validation in model magnets
21
An approximate electromagnetic model for superconducting helically wound cables and cable-in-conduit conductors
Speaker:
Rodriguez-Zermeno
Slides
22
Effect of combination of twist pitches on distribution of strands appearing on cable surface in CICC
Speaker:
Miyagi
Slides
23
A novel modeling of the critical current degradation of Nb3Sn PIT strand under transverse load based on Finite Element Analysis and strain scaling laws
Numerical models of HTS for AC loss computation: how far do we need to go?
Speaker:
Grilli
Slides
26
Magnetization losses due to any combination of rotating and alternating fields in superconducting filaments driven by a power-law voltage-current behavior
Speaker:
Masson
Slides
27
Multi-pole components of magnetic field in small dipole magnets wound with coated conductors
Speaker:
N. Amemiya
Slides
28
Finite Element Investigation of HTS Tapes for Twisted Stacked-Tape Cabling Methods
Speaker:
N. Allen
Slides
29
Quench Protection for High Temperature Superconducting Magnets based on Fiber Optic Distributed Temperature Sensing