Present: GA RDM AW MG EM ET AV
Gianluigi introduced few proposed modifications of the triplet area triggered by energy deposition studies: 1) increasing shielding in Q1 resulting in a reduction of the beam screen size, 2) decrease of the aperture of D1 at constant beam screen size. This trigger the actions:
Study the dependence of e-cloud effects / impedance on octagonal Beam Screen aperture with counter-rotating beams. Action: Elias.
Evaluate whether this is compatible with a beta* of 10 cm and the maximum aperture reduction that has no impact on the beta* reach. If this is not compatible with a beta* of 10 cm the minimum beta* (below 15 cm) should be identified. For what concerns D1, as long as the beam screen is not reduced in size with respect to the triplets, this has no impact on beam dynamics. Action: Riccardo.
Also at this stage it would be interesting to know the impact of the tolerances on the absolute sizes of the beam screen. Action: Ezio to provide first estimate of tolerances.
The dependence of the integrated radiation on the shielding thickness at Q1 is needed for the optimization. The results of the simulations will be presented to a WP3 meeting on 28/5.
Ezio explained that the goal is to keep the integrated radiation below 20 MGy for an integrated luminosity of 3000 fb-1.
Massimo reported on the status of the field imperfections studies (Task 2.3). He illustrated the main achievements: new magnet field quality specifications for injection and collision (to be re-assessed expecting improvements with the most updated layout) and triplet corrector specifications. The quoted dynamic aperture in sigma (target 10.45) refers to the LHC nominal emittance (3.75 um) and therefore it has some margin built-in as the emittance of the HL-LHC beams will be smaller. The a5, b5, b6 error component values have been reduced to 20% of the proposed errors as it is foreseen to have triplet multipolar correctors for this order and therefore this estimation would represent an imperfect correction.
Simulation codes are undergoing upgrades for new elements like crab cavities (RF multipole approach already included in SixTrack) and fringe fields and for new analysis on long term dynamics. Plans are to continue to follow up the field quality of the insertions magnets, fringe fields analysis and simulation tools.
The layout SLHC3.01 and SLHC3.1b will still be used, waiting for the settlement of the HL-LHCV1.0.
AV asked for a standard input on RF multipoles for crab cavity. Action: Gianluigi to ask for input to E. Jensen.
AW asked clarifications on the impact of the layout used on the field quality specification. MG replied that the layout differences are taken into account to give close but slight pessimistic specification on short time scale to be re-evaluated following the evolution of the layouts.
The next meeting will have place on May 21 on the status of Task 2.2.
The following meeting to be scheduled at the beginning of June will present the status of the last layout and optics baseline HL-LHCV1.0.
There are minutes attached to this event.
Show them.