CLIC Experimental and Breakdown Studies

→ Europe/Zurich
18-3-032 (CERN)

18-3-032

CERN

Breakdown studies meeting 06.02.2018

Present: Walter Wuensch, Jan Paszkiewicz, Iaroslava Profatilova, Enrique Rodriguez Castro.

Remote connected (via Vidyo): Anton Saressalo, Andreas Kyritsakis, Flyura Djurabekova from University of Helsinki from University of Helsinki; Oleg Kondratiev from Energy Pulse Systems.

Speakers: Anton Saressalo

Link to indico page https://indico.cern.ch/event/702615/

 

Agenda

1. Anton presents “Results and plans for pulsed dc system at Helsinki”. He describes the history of the electrodes and tests for old Soft Cu, Hard Cu 1 and Hard Cu scratched. The first conditioning curves for those electrodes were shown. Hard Cu scratched electrodes achieved lower electric field that Hard Cu 1 (70 MV/m instead of 80 MV/m). The re-conditioning of Hard Cu 1 (after several months outside of vacuum chamber) were more slowly than before (either with HRR circuit or Marx generator). Anton mentioned also, that the re-conditioning were made with 2 kHz, while during the first test with Marx generator is was 1 kHz, that should not affect to this results.
The studying of pulse width shown the linear dependency with BDR. The occurrence of BDs within a pulsing period was shown.
The mass spectrum during pulsing was shown. It was mentioned that pressure is changing close to breakdown event. 
The method for analyzing data for PDF was discussed. Anton shows the PDF for different datasets (taken by Anders with HRR circuit, taken by Iaroslava with Marx generator, taken by Anton with Marx generator). The data from Helsinki have a linear behavior, while others don’t. The reason needs to be found.
The data from pulsed dc system at CERN taken with flat mode together with data from BDs localization need to be send to Helsinki for analysis.

2. The next steps for the test at Helsinki were discussed. Currently, Anton makes the test with a flat mode to collect more data for statistics.

3. Soft Cu electrodes will send to Helsinki in the closest future. The cleaning procedure and conditions for storage of electrodes were discussed. It was proposed to send each couple of electrodes to Helsinki directly before their test.

There are minutes attached to this event. Show them.