PPPS 2019

Material Package

Added Since

Include only attachments uploaded after this date

Include*

Everything

Specific sessions

Specific contributions

Specific days

Sessions*

Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems

2.7 Microwave Plasma Interaction III

8.5 Power Supplies and Modulators II

2.7 Microwave Plasma Interaction II

Plenary Tues PM - Uri Shumlak

4.1 Fusion (Inertial, Magnetic and Alternate Concepts)

1.2 Computational Plasma Physics I

9.1 Optical, X-ray, FIR, and Microwave Diagnostics and 9.3 Pulsed Power Diagnostics

5.5 Insulation and Dielectric Breakdown III

5.1 & 5.2 Opening and Closing Switches II

5.5 Insulation and Dielectric Breakdown II

5.2 & 5.3 Transmission Lines and Transformers and High Energy Density Storage

4.2 Particle Acceleration with Laser and Beams

4.6 Fast Z Pinches III

9.3 Pulsed Power Diagnostics

2.6 Non-Fusion Microwave Systems and 2.7 Microwave Plasma Interaction I

Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components

2.1 Intense Beam Microwave Generation

Plenary Wed - Alexander Kim (2019 Erwin Marx Award)

Plenary Fri - Bruce Cohen (2018 Charles K. Birdsall Award)

Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications

Plenary Thurs - Thomas Mehlhorn (2019 Peter Haas Award)

4.4 High Energy Density Matter

2.5 Codes and Modeling

7.2 High Current and High Power Pulsers II

6.3 Plasma Thrusters

3.1 Plasma, Ion, and Electron Sources II

6.1 Nonequilibrium Plasma Applications III

5.1 & 5.2 Opening and Closing Switches I

4.7 Plasma Material Interactions

2.2 Fast-Wave Devices and 2.4 Vacuum Microelectronics and THz Devices

1.1 Basic Phenomena III

1.2 Computational Plasma Physics II

Thurs PM - TAC 8

6.4 Environmental, Industrial, and Display Applications II

5.5 Insulation and Dielectric Breakdown I

4.3 Radiation Physics & X-ray Lasers and 4.5 Laser Produced Plasmas

2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications

1.5 Dusty Plasmas and Strongly Coupled Plasmas

7.4 Linear Tranformer Driver

6.1 Nonequilibrium Plasma Applications II

2.3 Slow-Wave Devices

1.4 Partially Ionized Plasmas

8.2 Generators and Networks and 8.3 Repetitive Systems

6.4 Environmental, Industrial, and Display Applications I

4.6 Fast Z Pinches II

Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics

10.3 System Modeling, Thermal, EMI and Circuits

7.3 Compact Pulsed Power

6.1 Nonequilibrium Plasma Applications I

3.2 Intense Electron and Ion Beams

1.1 Basic Phenomena II

8.1 Electromagnetic Launch

6.2 High-Pressure and Thermal Plasma Processing

4.6 Fast Z Pinches I

9.1 Optical, X-ray, FIR and Microwave Diagnostics

7.2 High Current and High Power Pulsers I

6.5 Biological and Medical Applications II

Plenary Mon PM - Manfred Thumm (2018 NPSS Merit Award)

Posters Fundamental Research and Basic Processes and Power Electronics

7.1 Explosive Power Generators

6.4/6.5 Environmental, Biological, and Medical Applications

3.1 Plasma, Ion, and Electron Sources I

10.1/10.2 Converters, Components,Magnetics, Swiches and Capacitors

8.5 Power Supplies and Modulators I

6.5 Biological and Medical Applications I

Plenary Mon AM - Martin Gundersen

1.6 Plasma Chemistry

Plenary Tues AM - John Verboncoeur (2019 Plasma Science and Applications Award)

1.2 Computational Plasma Physics III

1.1 Basic Phenomena I

1.3 Space Plasmas

Include materials from selected sessions

Contributions*

1P02 - Implications of surface roughness on microscale gas breakdown theory (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P03 - Phase mixing and collisionless dissipation at the boundary sheath of magnetized low temperature plasmas (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P04 - RF Gas Breakdown Theory and Experiment as a Function of Gas, Gap Size, Frequency, and Pressure (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P05 - Investigation of Electron Emission using Molecular Dynamics Simulations (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P07 - Density rise away from the antenna in a helicon plasma source following resonance cone absorption in a diverging axial magnetic field (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P08 - Investigation of Electron Emission Characteristics of Multi-finger Ferroelectric Trigger Source for Pseudospark Switch (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P09 - Electron emission in liquids (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P10 - Unification of thermionic, field and space charge limited emission (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P11 - Investigating transport properties of collisionless magnetized plasmas in pulsed power systems via high-order kinetic simulations (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P12 - Quantifying Streamer Dynamics for Azimuthally Swept 3D Wedges in Pin-to-Plane PIC-DSMC Simulations (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P15 - Determination of First Townsend Ionization Coefficient by Simulation (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P16 - MODELING ELECTRODE CONFIGURATIONS FOR NANOSECOND PULSED PLASMAS (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P17 - Spontaneous density variations observed in steady-state plasmas sustained using focused microwaves. (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P21 - Submicroscale Gas Breakdown as a Function of Cathode Protrusions (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P23 - Remote plasma assisted graphene growth for designing graphene/Si hetero-interfaces (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P24 - DESIGN,bUILD, AND TEST OF A LOW COST 3D PRINTED SPECTROMETER FOR EXPLOSIVE COPPER AND CONDUCTIVE POLYMER WIRE EXPERIMENTS (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P25 - Dielectric Elastomers: An Investigation in Strain Dependent Electrostatic Pressure of Soft Compliant Dielectrics (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P26 - Catalytic and Acoustic Nano/Micromotors (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P30 - Progress Porting VPIC to Several Modern Architectures (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P31 - Speed-Limited Particle-in-Cell Modeling of Low-Temperature Plasma Discharges (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P33 - Advanced optimization and machine learning for magnetron design (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P35 - MODELING POWER-FLOW USING THE PERSEUS/FLEXO AND HYDRA MHD SIMULATION CODES (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P37 - Diode Design For Increased Radiation Dose in HERMES III Far-Field (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P38 - Thermodynamic properties and transport coefficients of C4F7N/CO2 thermal plasma as an alternative to SF6 (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P39 - A High Order Convected Scheme Solution of the Wigner-Poisson System (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P40 - Data storage of particle-in-cell simulations for big data analysis of capacitively coupled plasma reactors (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P41 - A Fluid Solver approach via Discontinuous Galerkin Methods to Viscoelastic Models for dense plasmas (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P42 - Momentum Coupling in Magnetized Plasmas (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P43 - Experimental Investigation of Colliding Plasma Flows (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P45 - Laboratory Simulations of Solar Wind Interactions with Airless Bodies: Magnetic Anomalies and Wakes (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P46 - Numerical simulation of a spark channel expansion in water and its comparison with an experimental result (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P47 - Electron heating mode transitions in a capacitively coupled oxygen discharge (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P55 - Pulsed power-induced CO2 dissociation for CO production (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P56 - Modeling of the Plasma Chemistry in an Electron Beam Induced Discharge* (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P57 - Generation of carbon monoxide from carbon dioxide using nanosecond pulsed discharge (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P60 - DETAILED GAS ANALYSIS IN NANO SECOND PULSED NON-EQUILIBRIUM PLASMA PROCESSING OF HYDROCARBONS FOR MASS BALANCE (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P61 - Effects of non-Maxwellian electron energy distribution function on plasma chemistry in Cl$_2$ and CF$_4$ (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P63 - Spectroscopic investigation of air excited and ionized by an electron beam* (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P65 - Development of a plasma source to accommodate an LIF dip measurement system (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P66 - What different effects can be taken by different liquid-dissolved gases on the concentration of aqueous RONS? (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P67 - Design of High-Voltage Pulse Generator Control System for CSNS Linac RF System (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P68 - Compact Rapid Capacitor Charger for Mobile Marx Generator Applications (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P69 - A Compact 100 kW high-voltage power supply with balanced bipolar output (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P71 - Ablation and Breakdown Characteristics of High Current Gas Spark Switch with Different Profiles (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P72 - Measurement of Diode Reverse Recovery Losses as a Function of Switching Frequency* (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P73 - High Rate Charge and Discharge of High Voltage Capacitors* (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P75 - Multi-pulse performance of amorphous metal magnetic cores at high magnetization rates (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P76 - Compatibility of SLA and FDM printed components with common insulating oils (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P79 - An Eigenvalue Approach to Study SPIDER RF Oscillator Operating Space (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P81 - E-band Power Combining Experiment for High Power Millimeter Waves* (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P82 - High Power Ćuk Converter for Fusion Science Applications (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

1P84 - Plasma water treatment and oxidation of organic matter in water (in session "Posters Fundamental Research and Basic Processes and Power Electronics")

2P01 - Modeling a compact A6 relativistic magnetron operating with permanent magnets (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P02 - Modeling the wakefield excitation by a 28 GHz microwave pulse in a plasma filled waveguide (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P03 - Effects of the Mesh Anode Transparency on the Operation Characteristics of the Virtual Cathode Oscillator (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P04 - Development and testing of the 190 GHz dual mode OAM gyrotron with axial output (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P05 - Fast-Wave and Slow-Wave Interactions in the Rippled-Field Magnetron (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P06 - Frequency tunable X-band Relativistic Backward Wave Oscillator (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P07 - Examination of stability against beam parameters in a Ku band helix TWT (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P08 - Metamaterial Based RF Source (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P09 - Cold Test Validation of Metamaterial Based Rectangular Slow Wave Structure for High Power Backward-Wave Oscillators (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P10 - Simulation of an Industrial Magnetron Using Cathode Modulation (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P11 - NLTL Frequency Chirp through Dynamic Bias of Inductor Cores (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P12 - The Influence of Magnetic Field Profile on the Downstream Electrons and the Output Mode of MDO (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P13 - Hybrid Kinetic-Fluid Simulations of a Ku-band MILO (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P14 - W-band 2D Periodic Lattice Oscillator (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P15 - Operation of a Gyromagnetic Line with Magnetic Axial Bias (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P16 - Simulations of a W-Band Circular TWT (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P17 - Pulsed RF Signal Irradiation Using a Low Voltage NLTL Coupled to a DRG Antenna* (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P18 - E-band Overmoded Relativistic Backward Wave Oscillator (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P19 - 3D ICEPIC SIMULATION OF AN X-BAND RELATIVISTIC TWISTRON (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P20 - Simulations of Surface Inhomogeneities in Field Emission (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P21 - Beam-Current Loss in Emittance-Dominated High-Frequency Tubes (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P24 - Hybrid Quantum-Hydrodynamics/Kinetics Model for Dense Plasma Mixtures (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P26 - Plasma Simulation and Modeling of Pseudospark Discharge for High Density and Energetic Electron Beam Generation (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P27 - PIC-DSMC numerical grid heating in collisional plasmas: Application to streamer discharge simulations (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P28 - Dispersion Engineering for O and M-Types High Power Microwave Sources (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P29 - Fast A-Stable Implicit Scheme and Scalable Software MOLTN For Electromagnetics (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P30 - Electrostatic Finite Element Numerical Modeling of Spark Gap and Related Accelerator Structures (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P31 - Modeling of gas recirculation effects in nanosecond-pulsed high-frequency discharges (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P32 - Study of two-surface multipactor susceptibility using Monte Carlo simulation (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P33 - High Power Radio Frequency Pulse Shaping For a 1.5MW S Band Magnetron Source (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P34 - Feasibility Study of Guiding High Power Microwave with Laser Created Plasma Ring Channels or Photonic Crystals in Air (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P35 - Investigation into the Propagation of Electron Beams of Different Shapes through Gas-Filled Space Using PIC Simulations (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P36 - Electron Temperature and Density Measurements of Plasma Generated at the Focus of a CW Microwave Beam (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P37 - Multipactor in Coaxial Transmission Lines (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P39 - Suppressing single-surface multipactor discharges using non-sinusoidal electric field (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P40 - Linear plasma experiment for non-linear microwave interaction experiments (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P44 - Perspectives of Supercritical Fluids for Switching Applications (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P45 - High performance triggering transformer for stack of series connected thyristors (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P46 - Data acquisition system for HEH monitor (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P47 - Development and Switching Characterization Study of Hot Cathode Thyratron for Pulse Modulator Applications in Linear Accelerator (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P48 - DIFFERENT PATTERNS OF CURRENT QUENCHING PHENOMENA DURING PSEUDOSPARK DISCHARGE (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P49 - Performance of 20-kV, 20-A Silicon Carbide High-Voltage Modules (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P50 - Surface Passivation of GaAs Photoconductive Semiconductor Switches with Silicon Resin (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P51 - Comparison of Lateral and Vertical Photoconductive Semiconductor Switches Fabricated on 4H-SiC (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P53 - The Influence of Electrode Profile on Repetition Performance of Corona-stabilized Switch (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P54 - Polarity Effect of Repetitive Corona Stabilization Breakdown (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P55 - On the performance of triggered closing switches deployed in high explosive pulsed power experiments* (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P56 - MODERNIZATION OF THE MARX AND RIMFIRE TRIGGERING SYSTEMS FOR THE HERMES-III ACCELERATOR (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P57 - Silicon Carbide drift step recovery diode structures evaluated as >10kV nanosecond pulse power switches using Mixed-Mode simulation (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P59 - A High-gain nanosecond pulse generator based on inductor energy storage and pulse forming line voltage superposition (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P61 - STUDY ON SHEATH INDUCED VOLTAGE AND SPATIAL TEMPERATURE FIELD OF LONG-DISTANCE 330/110KV CABLE SHARED THE SAME PIPE JACKING (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P62 - A comprehensive design procedure for high voltage pulse power transformers (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P65 - Design of A Long Pulse High Energy Water Transmission Line to Drive HPM Sources (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P66 - A 1 MV Tesla pulsed transformer (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P68 - Design of a Dielectric Compression Bushing for Compact, High-Voltage Applications (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P69 - A sequential characterization method for the insulation evaluation of the rod-plane gap under repetitive frequency nanosecond pulses in high-pressure nitrogen (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P70 - Experimental approach of the dielectric strength of a vacuum insulator (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P72 - INFLUENCE OF THE CREEPAGE DISTANCE ON SURFACE FLASHOVER OF THE EPOXY INSULATION UNDER AC VOLTAGE IN C4F7N-CO2 MIXTURES (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P74 - STUDY OF DISSOCIATION CHARACTERISTIC OF SF6-N2 MIXTURES UNDER CORONA DISCHARGE WITH PIN-TO-PLATE ELECTRODE (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P75 - THE DISCHARGE CHARACTERISTICS OF C5 AND ITS MIXTURES IN UNIFORM FIELD UNDER AC VOLTAGE (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P76 - C5F10O/N2 GAS MIXTURE TO SUBSTITUTE SF6 IN HIGH VOLTAGE APPLICATIONS (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P77 - Investigation of impulsive breakdown of interfaces formed by ester insulating liquids and solid dielectrics (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P80 - Insulator Technologies to Achieve Maximum Electric Field Holdoff (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

2P81 - Impact on electrodes during plasma decomposition of carbon dioxide (in session "Poster - Microwave Generation and Plasma Interactions and Pulsed Power Switches and Components")

3D Magneto-Hydrodynamic Modelling of an Overstressed Helical Magnetic Flux Compression Generator (in session "7.1 Explosive Power Generators")

3P01 - Novel High Voltage Pulsing to Generate Uniform Glow Discharge Air Plasma for Environment Friendly Inline Treatment of Textile (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P02 - Reactive Sputtering of Aluminum Acetylacetonate for Deposition of Alumina Films (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P04 - Spectroscopic Measurement of Active Species Generated in Streamer Discharge on Water Surface (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P05 - Reillumination of Expiring Corona-like Pulsed Discharges in Water (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P06 - Plasma Properties in a High Pressure ALD Reactor (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P07 - Electrical Discharge in Gas-liquid Mixture: Breakdown Voltage and Energy Deposition Distribution in Each Phase (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P08 - Evaluation of electric field and charge on bio-substrates induced by nanosecond pulsed helium plasma jet (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P09 - TWO TEMPERATURE SIMULATION OF SUBATMOSPHERIC ARC DISCHARGE* (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P10 - Gas Temperature Determination of Nonthermal Plasma Through Boltzmann Plot Method (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P11 - Temporal Gas Temperature Measurement of Single Filament in Atmospheric Pressure Plasma Jet (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P12 - One-dimensional Numerical Simulation on Nanosecond Pulsed Discharge (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P13 - Corona Discharge Induced Submicron Water Droplet Coalescence and Growth in a Subsaturated Cloud Chamber (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P14 - Argon cold atmospheric pressure plasma jet enhancing seed germination and seedlings growth of fenugreek (Trigonella foenum-graecum) (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P17 - Investigation on shock wave generated by underwater discharge due to different progress of plasma (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P18 - CALCULATION OF ARC CONDUCTANCE AFFECTED BY FLOW FIELD FOR IMPROVEMENT OF CURRENT INTERRUPTION PERFORMANCE (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P21 - Development of 3D Electromagnetic Thermal Fluid Simulation for Elucidation of Gas Contamination Process of Circuit Breaker (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P22 - Performance of a Pulsed Electromagnetic Micropropulsion System with Low Energy Surface Flashover Igniter (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P23 - High density plasma thruster (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P25 - Pulsed power supply design for vacuum arc thrusters application (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P26 - Study of Conductivity on Hydrogen Peroxide Concentration by High Repetitive Underwater Discharge (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P27 - Sterilization of E. coli in seawater using discharge in water and dielectric barrier discharge (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P28 - Flexible Control of Pulsed Power Generator for Research Applications with Sensors (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P29 - Plasma source for generating ultrasonic and ultraviolet radiation in water (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P30 - Production of crushed sand using underwater pulsed discharge (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P31 - Aggregation inhibition of nanoparticle dispersion by nonthermal plasma irradiation (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P33 - Calculation and Analysis of Self-resistance of Grounding Material (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P34 - Growth of photocatalytically active coatings on aluminum by Plasma Electrolytic Oxidation (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P37 - Electric breakdown in granite as a function of pressure and temperature conditions (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P38 - Excess ion energy being essential for ultra-shallow implantation (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P39 - Investigation of Energy Control in Coaxial Reactor for Ozone Production by Using Nanosecond Pulsed Powers (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P40 - Improvement of ozone generation characteristics with shorter rise time of nanosecond pulse voltage (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P42 - Broadband Power Measurements of High-Voltage, 10-ns Pulses for Plasma Ignition for Combustion (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P43 - Temperature effect on the surface flashover plasma of the GIS insulator (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P44 - Erosion characteristics for different geometric electrodes in an AC rotating arc reactor (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P45 - Statistical examination of spoke evolution in HiPIMS (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P46 - Lorentz Force Eddy Currents for Nondestructive Testing (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P50 - CELL GEOMETRY-INVARIANT CALCULATION OF PLASMA MEMBRANE POTENTIAL DUE TO ELECTRIC PULSES USING VARIATIONAL CALCULUS (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P51 - A Bipolar High Voltage Pulse Generator Used for Irreversible Electroporation Ablation (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P52 - MODELING PLASMA SPECIES FORMATION FOR HIGH VOLTAGE ATMSOPHERIC COLD PLASMAS (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P53 - Magnetic field effects on efficiency of non-viral gene delivery using magnetic nanoparticles (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P54 - Effects of Nanosecond Pulsed Electric Fields Application and Combination of Anticancer Drug on Cancer Cell (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P56 - Variation of Physical Parameters in Plasma Wound Healing (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P58 - The Influence of Applying High Electrical Field Pulses on Unfolded Protein Response of cells (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P59 - Inactivation process observation of HeLa cells induced by atmospheric-pressure pulsed plasma jet (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P60 - Optimization of GFP introduction into HL-60 cells with a combination of two different rectangular pulses (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P62 - Improved electrode configuration for the production of plasma activated water (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P64 - Time-resolved ATR-FTIR to Reveal inactivation Kinetics of E. coli by Atmospheric DBD Plasma (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P65 - SURFACE DISCHARGE PLASMA INHIBITED THE BIOSYNTHESIS OF STAPHYLOXANTHIN IN STAPHYLOCOCCUS AUREUS (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P66 - PLASMA SOURCE FOR KILLING BACTERIA AND BIOFILMS ON SURFACES (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P68 - Investigation of bactericidal characteristics in packaged condition in high frequency high voltage pulse sterilization of food (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P69 - Consideration of sterilizing method for Stacked Pieces in Packaged Foods Using Pulsed Plasma (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P71 - High Power Microwave Pulse Testing of Electronic Devices using Reverberating Chambers (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P73 - Visible Spectroscopy Techniques for Diagnosing Plasmas in High-Energy-Density Power-Flow Systems (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P74 - Development of an LIF-dip system to measure electric field magnitude (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P76 - Measurement on Electrical Conductivity of Exploding Copper Wire During Current Dwell Time (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P77 - A FREQUENCY RESPONSE TEST DEVICE FOR NANO-SECOND COAXIAL RESISTOR DIVIDER (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P78 - LUMPED PARAMETER MODEL AND ANALYSIS OF WIDE BAND RESISTANCE CAPACITANCE PARALLEL VOLTAGE DIVIDER FOR OVERVOLTAGE MONITORING (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P79 - Electro-Optical Measurement of Electric Fields for Pulsed Power Systems (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P81 - Analysis of Cygnus Electrical Signals (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P82 - HIGH CURRENT SENSING THROUGH FARADAY ROTATION OF POLARIZED LIGHT OF VARYING WAVELENGTHS IN FIBERS III* (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P83 - Design of Ultra Wide Band Large Capacitance Load Pulse Source (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P84 - Design and calibration of magnetic pick-up coil (B-dot) probes for measuring strong magnetic fields using commercial electronic components (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P85 - Z Line-VISAR: Spatially Resolved Load Current Diagnostic at the Z Pulsed Power Facility* (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P86 - Vacuum Ultraviolet Spectroscopy for Power Flow Studies on the 1 MA, 100 ns MAIZE LTD (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P87 - Design and Performance of a 6 GHz Analog Optical Link (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P88 - Design and Analysis on Coil Parameter of Linear Rogowski Coil for Measurement of High Frequency Pulsed Current (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

3P89 - Investigation of the Structural, Thermal and Electrical Properties of Plasma Polymerized o-Methoxyaniline Thin Films (in session "Poster - Industrial/Commercial/Medical Applications and Plasma and Pulse Power Diagnostics")

4P01 - Validation of a configurable ion source for testing spaceflight-based thermal plasma measurement instruments (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P02 - Particle-in-cell modeling of the Saturn accelerator vacuum section (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P05 - Features of the millisecond arc discharge generating emission plasma in the forevacuum plasma-cathode source of large-radius electron beam (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P06 - Plasma source with multi-aperture extraction system for generating a ribbon electron beam (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P07 - Monte-Carlo modelling of parallel electron transport in the Proto-MPEX linear plasma device (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P08 - Studies on power transfer efficiency in the drivers of the SPIDER inductively coupled RF ion source (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P09 - Experimental Investigation of Pseudospark Discharge Based Plasma Cathode Electron Source for the Generation and Propagation of High Density and Energetic Electron Beams (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P10 - Statistical Quantization and Optimization of Cold Atmospheric Pressure Plasma Source for Destroying Bacteria and Biofilms through Design of Experiments Method (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P11 - Properties of the energy-controlled atmospheric pressure plasma driven by multi-step external ballast capacitors (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P12 - Radio Frequency Plasma Generation without 50 Ohm Matching (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P13 - CNT Field Emission Cathodes Evaluated for a Portable X-Ray Generator for Root Imaging (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P17 - Electron Beam Studies and X-ray Spectroscopy of Dense Plasma Focus Experiments (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P18 - DETERMINATION OF THE PARTICLES INVOLVED IN ANODE INITIATED VACUUM BREAKDOWN USING A 1-MV, 50-NANOSECOND PULSE GENERATOR* (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P19 - Effects of the electron beam parameters on hydrodynamic response of aluminum: measurements and simulations. (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P20 - PROPAGATION OF ELECTRON BEAMS IN GAS CELLS (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P21 - Propagation of an intense relativistic electron beam through plasma. (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P22 - Comparisons of a Quantum Photoemission Model with Three-step Model and Fowler-Dubridge Model (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P24 - SATURN ACCELERATOR BREMS DIODE SINGLE CATHODE CURRENT SCALING (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P27 - EMPIRE simulation of the RKA diode into the gas cell (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P29 - PIC simulation of ion beam expansion in a drift cone configuration for RFEA measurements. (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P30 - Improvement of Heaven-I high power excimer laser facility for ICF study (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P31 - Auto-collimation and monitoring of KrF laser beam in the E-beam pumped high power excimer laser facility (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P32 - Parametric Study of a Cylindrical Inertial Electrostatic Confinement Fusion Device and its Application (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P33 - Development of high-voltage power supply system for upgrading ECH system of the KSTAR (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P35 - Development of an electron-beam pumped, argon fluoride laser for inertial confinement fusion* (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P38 - Hybrid fluid/kinetic modeling of dense plasma focus devices using USim and VSim (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P39 - The Design, Properties, Operation and Modeling of the STPX Plasma Device (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P40 - Elements of Three Dimensional Modeling of a Pulsed Fission Fusion Hybrid Z-Pinch Target for Advanced Propulsion (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P41 - Overview of the C-2W Formation Section Pulsed Power (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P44 - Analysis for the Generation of Extreme Ultraviolet (EUV)/Soft X-Ray Radiations based on Short Pulse Electron Beams (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P45 - Combustion of electrical underwater exploded aluminum wire (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P46 - Fine Liquid-Metal Load for Repeatable Applications of Pulsed-power Discharge (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P49 - Target machining using datum point tooling for Precision High Energy-Density Liner Implosion Experiment (PHELIX) magnetic implosion system (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P50 - Optimizing Micropinches Produced by Hybrid X-pinches for High Time Resolution X-ray Spectroscopy (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P51 - Diagnostics to study electrothermal instabilities on MYKONOS (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P52 - Experimental measurement of thermal and electrical conductivities in warm dense state generated by pulsed-power discharge for efficient energy conversion of fast ignition (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P53 - 2D Simulations of the ns-Laser Shock Peening (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P55 - SIMULATIONS OF NOZZLE GAS FLOW AND GAS-PUFF Z-PINCH IMPLOSIONS WITH MAGNETIC FIELDS IN THE WEIZMANN Z-PINCH* (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P56 - Study on Fault Conditions of a Single Stage of Fast Linear Transformer Drivers (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P57 - ABLATION BEHAVIORS AND IMPLOSION DYNAMICS OF PRECONDITIONED TWO-WIRE Z-PINCH (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P58 - Understanding electrothermal instability growth by comparing z-pinches with engineered defects to 3D-MHD simulations (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P59 - Investigating the Electrothermal Instability in Pulsed Power Solid Liner Implosions Using Extended Magnetohydrodynamics (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P60 - Millimeter-wave Radiometry and Coherent Thomson Scattering for Studies of Power Balance in COBRA* (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P61 - Magnetic Field Diffusion into Al-6061 Rod under Megaampere Current Drive (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P62 - Electrostatic gyrokinetic simulations of sheared Z-pinch (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P63 - Measurements of the Magnetic Rayleigh Taylor Instability in Centimeter-Scale Magnetized Plasma Bubbles* (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P64 - Zeeman Spectroscope Studies in Ar Gas Puff Z-Pinches on 1-MA COBRA* (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P65 - X-ray Spectroscopy and Total Yield Measurements on a Microsecond X-Pinch (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P66 - Initial Conditions & Plasma Evolution in the Hawk Dense Plasma Focus (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P67 - Extending Experimental and Diagnostics Capabilities on the 1-MA, 100-ns MAIZE Pulsed Power Facility (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P68 - Faraday-Rotation fiber-based gauge for current measurement in pulse-power systems (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P69 - Characterization of Neutron Production in Deuterium Z-pinch Experiments at Current of 3 MA (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P75 - Laser-driven acceleration of titanium ions from ultrathin targets and the calibration of the ion beam diagnostic (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P76 - Topanga: A Modern Code for E3 EMP Simulations (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P77 - Simplified Radiation Model for Atmospheric Plasmas (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

4P78 - Generation and propagation of nitrogen laser pulses of long (< 3 µs) duration in air (in session "Poster - Charged Particle Beams and Accelerators and High Energy Density Plasmas and Applications")

5P01 - High Speed Imaging of Polymer Bonded Explosives under Mechanical Stresses (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P02 - Probability of PBX Detonation Due to Impact Forces and Surface Grit (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P04 - An ultra-portable X-pinch driver for hard X-ray diagnostics (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P05 - High-Energy Electric Gun for Exploding Foil Initiators (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P06 - Study on the restrike characteristics of metal electrical explosion (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P07 - Pulsed power supply for 2 kA, 5 MeV linear induction accelerator (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P09 - TECHNICAL DEVELOPMENT AND FIRST RESULTS OF ISENTROPIC COMPRESSION EXPERIMENTS ON THE ICE-16 TEST FACILITY (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P10 - Design and simulation of compact explosively-driven magnetic flux compression (MFC) generators for high energy applications. (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P12 - Cinco: A Compact High-Current Driver for High Energy Density Physics (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P13 - OPTIMIZING COMPACT MARX GENERATOR NETWORKS FOR CHARGING CAPACITIVE LOADS: SEQUENTIAL TRIGGERING AND PRACTICAL CONSIDERATIONS (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P14 - Performance Analysis of a Compact Pulse Forming Stage and a Microstrip Type Balun for High Power Electromagnetics Applications (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P15 - Design of Modular High-Voltage Nanosecond Pulse Generator with Adjustable Rise/Fall Time Based on MMC Topologies (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P16 - The Optimization of High Voltage Nanosecond Pulse Generator with Auxiliary Trigger Circuit (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P17 - Characterization of Compact Short Pulse Power Supply for Non-Thermal Plasma Discharge Applications (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P19 - Advanced NanoDielectric Material Scaling for Further Size Reduction of Ultra-High Voltage, 500 kV Capacitor Prototypes (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P22 - Compact, Mobile, Automated Pulser Designed for Ease of Use (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P23 - Measurements on Combined 12.5/17.5 kV Prototype Inductive Adder for the CLIC DR Kickers (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P24 - Indigenously developed pulsed power sources for nonequilibrium plasma applications (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P26 - Repetitive Triboluminescence X-Ray Source by Peeling Tapes (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P27 - Pulsed Power Discharge Under a Highly Capacitive Load (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P28 - Sustaining High Power RF Signal Generation in a Positive Feedback Network (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P29 - Triggered gas switches for use in capacitor-switch assemblies for LTD technology (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P30 - Concept designs of a compact LTD generator with a pulse rise time of 100 ns. (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P31 - IMPROVEMENT OF THE SWITCHES RELIABILITY ON THE CEA 1MV LTD (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P33 - Linear Transformer Driver for HEDP experiments at UC San Diego (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P34 - PULSE POWER SYSTEM (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P35 - Design of a Pulsed Alternator to drive a Single Stage Induction Coilgun (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P38 - Utilization and Optimization of Superconducting Coil Parameters in Electromagnetic Launcher Systems (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P41 - Design of A Vehicular 200-kJ Pulsed Power System for Electrothermal-Chemical Launch Experiment (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P42 - The Development of Capacitive Nonlinear Transmission Lines and Their Performance Limits (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P43 - Dynamics of Melting Solenoids for Laser Experiments on the National Ignition Facility (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P44 - Development of an RF circuit amplifier fed by a low power nonlinear transmission line (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P45 - Implementation of Line Type High Voltage Nanosecond Rectangular Pulse Generator with Adjustable Pulse Widths for Liquid Discharge Applications (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P47 - Modular, High-Frequency, High-Voltage Inductive Adders (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P48 - High Average Power Nanofarad-Scale Capacitor Charging on Sub-Microsecond Timescales (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P49 - Solid-State LTD Module Using SiC-MOSFETs (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P50 - A Means of Producing Precisely Delayed High Peak Power Optical Pulses with Low Jitter (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P51 - Present Status of the Chopper-type Marx Modulator Development at KEK (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P52 - Investigations on an optimized current pulse for pulsed flash lamps dedicated to high energy laser in repetitive mode. (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P55 - ESS Klystron Production Test Stand (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P56 - A METHOD OF ENERGY RECOVERY SWITCHING FOR PULSED POWER USING SIC-MOSFET (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P57 - All solid state ultra-fast turn-on time compact MARX generator (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P58 - Development of a compact nanosecond pulse generator (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P59 - Energy Density Optimization of Inductive Pulsed Power Supply Module (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P60 - Study on the Collaborative Work of Multiple Meat Grinder with SECT Modules (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P61 - Meat Grinder with ACC Circuit (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P62 - Development of bipolar pulsed transmitter based on modular structure for mineral exploration (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P63 - Push-pull plasma power supply – combining techniques for increased stability (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P64 - Development of High Voltage Power Supply for The Upgrade KSTAR Helicon Current Drive System (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P65 - The influence of the architecture of the power system on the operational parameters of the GlidArc plasma reactor (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P66 - Reduction of the conducted disturbances generated by the ignition systems of GlidArc plasma reactors (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P67 - Pulsed Power Modulator with Active Pull-Down Using Diode Reverse Recovery Time (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P69 - Design and Commissioning of a Medium Voltage Testbed Deploying Transient Loads* (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P71 - Pulsed Power Systems Developed for the Lockheed Martin Compact Fusion Reactor (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P72 - Design and Performance of a 4 MV, 14 kJ Marx Generator (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

5P74 - 50 kV Resonant Full Bridge for Klystron Driving (in session "Poster - Compact and Explosive Pulsed Power and Pulsed Power Systems")

8-Stage Pulse Generator for Generation of Bipolar Rectangular Pulses (in session "8.2 Generators and Networks and 8.3 Repetitive Systems")

100KW PEAK RACKMOUNT MARX WITH DYNAMIC PULSE-TO-PULSE WAVEFORM CONTROL (in session "8.5 Power Supplies and Modulators I")

A 1.3 GHz 100 kW Ultra-High Efficiency Klystron (in session "2.3 Slow-Wave Devices")

A 2-D Numerical Model for the Estimation of the Time Varying Inductance of an Explosively-Driven Helical Flux Compression Generator (in session "7.1 Explosive Power Generators")

A 2.85 GHZ PULSED RF SOURCE FOR MULTIPACTOR RESEARCH UTILIZING GAN HEMTS CAPABLE OF 2 KW (in session "2.6 Non-Fusion Microwave Systems and 2.7 Microwave Plasma Interaction I")

A 30kV, 200kHz Solid-state Pulsed Power Generator Based on the Drift Step Recovery Diodes (in session "8.2 Generators and Networks and 8.3 Repetitive Systems")

A cold-cathode magnetron gun in plasma mode as driver for a THz generator (in session "2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications")

A COMPACT SOLID STATE TRIGGER GENERATOR UTILIZING A FERRITE LOADED AIR CORE TRANSFORMER* (in session "8.5 Power Supplies and Modulators I")

A Comparison between Ag/ZSM5 and Cu/ZSM5 Catalysts Coupled with Plasma in Hydrocarbon Catalytic Reduction of NOx at Low-Temperatures (in session "6.1 Nonequilibrium Plasma Applications II")

A COORDINATE INVARIANT THEORY FOR SPACE CHARGE LIMITED EMISSION USING VARIATIONAL CALCULUS (in session "1.1 Basic Phenomena III")

A high-repetition rate, magnetic core, pulse transformer based, fast 120 kV generator (in session "8.2 Generators and Networks and 8.3 Repetitive Systems")

A Kernel Based High Order ''Explicit'' Unconditionally Stable Constrained Transport Method for Ideal Magnetohydrodynamics (in session "1.2 Computational Plasma Physics III")

A Model of Thermal-Field Current from Microscopic Structures (in session "2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications")

A Multi-Material Velocimetry Detector for Pulsed Power Flow Studies (in session "9.1 Optical, X-ray, FIR, and Microwave Diagnostics and 9.3 Pulsed Power Diagnostics")

A multi-term spherical harmonic expansion of the Boltzmann equation for modeling low-temperature collisional plasmas (in session "1.2 Computational Plasma Physics II")

A MULTILAYER STRUCTURE OF COMPRESSED WATER FLOW GENERATED BY RE-STRIKE IN UNDERWATER ELECTRICAL WIRE EXPLOSION (in session "6.4/6.5 Environmental, Biological, and Medical Applications")

A novel device enhanced the active antimicrobial components in the plasma treated solution (in session "6.5 Biological and Medical Applications II")

A Novel High-frequency Pulse Generator Based on Bipolar and Marx Topologies (in session "8.2 Generators and Networks and 8.3 Repetitive Systems")

A pulse-sequence resolved study on evolution of streamer dynamics and discharge mode transition under repetitive frequency nanosecond pulses in high-pressure nitrogen (in session "5.5 Insulation and Dielectric Breakdown III")

A Study of Magnetized Jet Stability Using High Energy Density Plasmas (in session "4.4 High Energy Density Matter")

A STUDY ON ATTENUATION CHARACTERISTICS OF EXPLOSIVE EMISSION CATHODE PLASMA BASED ON ULTRA HIGH SPEED CAMERA TECHNOLOGY (in session "3.1 Plasma, Ion, and Electron Sources II")

A Theory of AC Contact Resistance (in session "1.1 Basic Phenomena III")

Advanced Implicit and Hybrid Techniques for the Simulation of High Density Volumetric and Electrode Plasmas (in session "1.2 Computational Plasma Physics II")

Advanced Multipactor Diagnostics and Tools (in session "1.1 Basic Phenomena III")

Advanced streamer imaging techniques (in session "9.1 Optical, X-ray, FIR and Microwave Diagnostics")

All-solid-state bipolar high voltage nanosecond pulse adder with output parameters adjustable (in session "7.2 High Current and High Power Pulsers II")

ALUMINUM DOUBLE PLANAR WIRE ARRAYS AND DOUBLE PLANAR FOIL LINERS ON THE UNR AND UM PULSED POWER DRIVERS (in session "4.6 Fast Z Pinches I")

An absorption spectroscopy platform to measure photoionization fronts in the laboratory (in session "4.4 High Energy Density Matter")

AN ALTERNATIVE CIRCUITRY FOR A TRANSFORMER COUPLED LC INVERSION GENERATOR (in session "8.2 Generators and Networks and 8.3 Repetitive Systems")

An Electron Gun for a Sheet Beam with a 3 to 1 Aspect Ratio: Design and Optimization (in session "2.3 Slow-Wave Devices")

Analysis of a New 15-kV SiC n-GTO under Pulsed Power Applications (in session "5.1 & 5.2 Opening and Closing Switches II")

Analysis of Commercial off-the-shelf 1200 V Silicon Carbide MOSFETs Under Short Circuit Conditions (in session "10.1/10.2 Converters, Components,Magnetics, Swiches and Capacitors")

ANALYSIS OF NITROGEN CONTAMINATION PROCESS INTO ARC AFFECTED BY LATERAL GAS FLOW VELOCITY IN ATMOSPHERIC PRESSURE (in session "6.2 High-Pressure and Thermal Plasma Processing")

Analysis of triggering behaviour of Marx generators by using Spice simulations (in session "7.2 High Current and High Power Pulsers I")

ASELSAN Electromagnetic Launch Laboratory: First Shot (in session "8.1 Electromagnetic Launch")

Assessing Effective Medium Theories for Designing Composites for Nonlinear Transmission Lines (in session "5.2 & 5.3 Transmission Lines and Transformers and High Energy Density Storage")

Atmospheric Pressure Breakdown and Evidence for Field Emission in GHz Split-Ring Resonators (in session "3.1 Plasma, Ion, and Electron Sources I")

ATOMIC HYDROGEN GENERATION IN THE IONIZING PLASMA REGION AND EFFLUENT OF A HELIUM-WATER ATMOSPHERIC PRESSURE PLASMA JET BY TWO-PHOTON ABSORPTION LASER INDUCED FLUORESCENCE (TALIF) (in session "1.6 Plasma Chemistry")

Atomistic Study of Polarization response in Functionalized Barium Titanate Nanoparticles (in session "1.1 Basic Phenomena II")

Benchmarking the Kinetic Global Model framework (KGMf): EEDF evaluations in low-temperature argon plasmas* (in session "1.2 Computational Plasma Physics II")

Breakdown characteristics of natural and synthetic ester liquids when containing varying levels of moisture (in session "5.5 Insulation and Dielectric Breakdown I")

BROADBAND BOUNDARY MODEL FOR INJECTION AND ABSORPTION OF EM-WAVES WITH THE HIGDON OPERATOR METHOD (in session "2.5 Codes and Modeling")

Buried Conductor Detection in The Seabed (in session "5.5 Insulation and Dielectric Breakdown III")

Cell permeabilization and exogenous molecule delivery via microwave treatment (in session "6.5 Biological and Medical Applications I")

Characteristic Analysis of Metal Oxide Resistor under Impulse of Different Wave-Head Time (in session "10.1/10.2 Converters, Components,Magnetics, Swiches and Capacitors")

Characteristics of nanosecond pulsed discharge type ozonizer with a tube to cylinder reactor (in session "6.4 Environmental, Industrial, and Display Applications II")

Characteristics of negative-polarity DC superimposed nanosecond pulsed discharge and its applications (in session "6.2 High-Pressure and Thermal Plasma Processing")

Characterization of Nano-second Pulsed Power Generator Synchronizing Double Inductive Energy Storage Circuits with Semiconductor Opening Switch (in session "7.2 High Current and High Power Pulsers I")

Characterization of Sustained Series dc Arc Duration for Advanced Detection Schemes (in session "10.3 System Modeling, Thermal, EMI and Circuits")

Characterizing breakdown voltage in micro-gaps with multiple field emitters at atmospheric pressure* (in session "5.5 Insulation and Dielectric Breakdown III")

COAXIAL-ALL-CAVITY-EXTRACTION ON THE HARMONIC RECIRCULATING PLANAR MAGNETRON (in session "2.3 Slow-Wave Devices")

Collective Effects of Nanosecond Pulsed Electric Fields on Cells Organized in a Monolayer (in session "6.5 Biological and Medical Applications I")

Compact Marx Generator to Drive a Low-Impedance MILO (in session "7.2 High Current and High Power Pulsers I")

Comparison of Plasma Sporicide Using Different Power Sources in Atmospheric-Air (in session "6.5 Biological and Medical Applications II")

Computational Study of a Pulsed Power Source based Electromagnetic Manufacturing Process (in session "6.4 Environmental, Industrial, and Display Applications I")

COMPUTER SIMULATION AND THE PHYSICS OF MIRAM CURVES (in session "2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications")

Considerations for improvements to the 25 TW Saturn high-current driver (in session "7.2 High Current and High Power Pulsers II")

Consistent BGK model for high energy density plasma mixtures (in session "1.2 Computational Plasma Physics I")

Construction of the BLUE Linear Transformer Driver (LTD) at University of Michigan (in session "7.4 Linear Tranformer Driver")

Control of large electric spark through laser filamentation in air (in session "6.4 Environmental, Industrial, and Display Applications II")

Convergence Ratio Effects on Ultra-thin Foil Liner Implosion and Explosion Stability (in session "1.2 Computational Plasma Physics III")

Coupled Optical and Electronic Simulation of Integrated Photonics based Hot-Electron Graphene Photoemitters using a 2-D Ensemble Monte Carlo Boltzmann Transport Equation Solver and a Finite-Difference Time-Domain Maxwell’s Equation Solver (in session "3.1 Plasma, Ion, and Electron Sources II")

CST PARTICLE STUDIO SIMULATIONS OF COAXIAL MULTIPACTOR SUSCEPTIBILITY AND EVOLUTION (in session "2.7 Microwave Plasma Interaction II")

Current adding strategies in compact linear transformer drivers (in session "7.4 Linear Tranformer Driver")

CYGNUS PERFORMANCE ON SEVEN SUBCRITICAL EXPERIMENTS (in session "9.3 Pulsed Power Diagnostics")

CYGNUS SYSTEM TIMING (in session "9.3 Pulsed Power Diagnostics")

Decomposition of 2,4-dichlorobenzonic acid in hydroponic nutrient solution using discharge inside bubble (in session "6.1 Nonequilibrium Plasma Applications III")

Design and calibration of a solenoid used on magnetized plasma experiments and of B-dot probes for measuring the strong magnetic fields using commercial electronic components (in session "4.6 Fast Z Pinches II")

Design and Electromagnetic Analysis of a Multi-Stage Induction Coilgun System for Heavy Projectile (in session "8.1 Electromagnetic Launch")

Design and Implementation of an Ultra-wideband Multipactor Test Cell (in session "2.6 Non-Fusion Microwave Systems and 2.7 Microwave Plasma Interaction I")

Design and Performance of a 2 m EUT MIL STD 461 (RS-105) Test System (in session "8.2 Generators and Networks and 8.3 Repetitive Systems")

DESIGN AND TESTING OF A COMPACT 40 KV CAPACITOR BASED ON NANODIELECTRIC COMPOSITES* (in session "5.2 & 5.3 Transmission Lines and Transformers and High Energy Density Storage")

Design of a Wide Band Test system with Interchangeable Antenna Modules (in session "8.5 Power Supplies and Modulators II")

Design of Solid-state Marx Modulator with Fast Rising Time and Short Pulse Width (in session "8.5 Power Supplies and Modulators I")

Detailed modeling of DPF on HAWK generator (in session "4.6 Fast Z Pinches III")

Development and Diagnostics on Composites for Nonlinear Transmission Lines (in session "5.2 & 5.3 Transmission Lines and Transformers and High Energy Density Storage")

DEVELOPMENT OF 3D ELECTROMAGNETIC THERMAL FLUID SIMULATION FOR ELUCIDATION OF MOVEMENT FACTORS IN VACUUM ARC (in session "6.2 High-Pressure and Thermal Plasma Processing")

Development of a 1MW pulsed air core electromagnetic toroidal coupler for wireless power transmission with reduced stray emission (in session "5.2 & 5.3 Transmission Lines and Transformers and High Energy Density Storage")

Development of a 750kJ Dense Plasma Focus for Radiation Test Applications (in session "4.6 Fast Z Pinches III")

Development of Low Frequency Dielectric Barrier Discharge using Rotatable Electrodes (in session "6.1 Nonequilibrium Plasma Applications I")

Direct Detection of Multipactor in Waveguide Structures (in session "2.7 Microwave Plasma Interaction II")

Direct observation of the current evolution in a small-scale self-compressing plasma column (in session "1.1 Basic Phenomena II")

Disinfection and Sensitization of Ear Infection Related Bacterial Biofilms by Microplasma Jet Array (in session "6.4 Environmental, Industrial, and Display Applications II")

Downstreaming of valuable compounds from microalgae with spark discharges, instigated by 100-ns high voltage pulses (in session "6.4/6.5 Environmental, Biological, and Medical Applications")

Dynamic Band-Pass and Band-Stop Filters Realized with Multidimensional Microplasma Photonic Crystals (in session "6.1 Nonequilibrium Plasma Applications III")

Dynamic Modeling of Pulsed Alternators using LTspice (in session "8.2 Generators and Networks and 8.3 Repetitive Systems")

Effect of Relative Humidity on the Flashover Strength of Solid Insulation (in session "5.5 Insulation and Dielectric Breakdown II")

EFFECT OF SUBSTRATES ON A NANOSECOND HELIUM PLASMA JET IMPINGING ON WATER, SALINE OR PIG SKIN (in session "6.1 Nonequilibrium Plasma Applications III")

EFFECT OF THE PREPULSE CURRENT ON THE PRECONDITIONED ALUMINUM WIRE ARRAY Z-PINCH (in session "4.6 Fast Z Pinches III")

EFFECTIVE METHANE CONVERSION BY NEGATIVE NANOSECOND REPETITIVELY PULSED DISCHARGE (in session "6.1 Nonequilibrium Plasma Applications I")

Efficiency of rock destruction by a pulse generator based on a linear pulse transformer (in session "6.4 Environmental, Industrial, and Display Applications I")

Elastostatics in Beam Optics Analyzer (in session "2.5 Codes and Modeling")

ELECTRIC FIELD MEASUREMENTS IN A NANOSECOND PULSED ATMOSPHERIC PRESSURE PLASMA JET IN HELIUM (in session "9.1 Optical, X-ray, FIR and Microwave Diagnostics")

Electrical explosions of cylindrical wire arrays in different materials (in session "4.4 High Energy Density Matter")

Electrochemotherapy Enhances the Curcumin Effect on TNBC Cells in a Dosage and Energy Dependent Manner (in session "6.5 Biological and Medical Applications II")

Electron Emission and Gas Breakdown: Unification of Theory from Schrodinger’s Equation to Paschen’s Law (in session "1.1 Basic Phenomena I")

ELECTRON EMISSION FROM A METAL ELECTRODE SUBJECT TO A HIGH INTENSITY LASER IN THE PRESENCE OF DC ELECTRIC FIELDS* (in session "3.1 Plasma, Ion, and Electron Sources II")

Electron Losses in Super-insulated Magnetically Insulated Transmission Lines (in session "5.5 Insulation and Dielectric Breakdown II")

ELECTRON PROPERTY MEASUREMENT OF A HIGH REPETITIVELY PULSED HELIUM PLASMA JET USING LASER THOMSON SCATTERING (in session "9.1 Optical, X-ray, FIR and Microwave Diagnostics")

Embedded miniature thrusters within carbon fiber reinforced structures (in session "6.3 Plasma Thrusters")

ENGINEERED TUNNELING ELECTRICAL CONTACTS (in session "1.1 Basic Phenomena I")

Enhancement of shock wave from underwater electrical wire explosion by replacing one thicker wire with many thinner wires (in session "6.4 Environmental, Industrial, and Display Applications I")

EVALUATION OF MAGNETIC STIMULATION FOR CELL MEMBRANE PORATION (in session "6.5 Biological and Medical Applications I")

Exact Solution for Two-Color Laser Induced Photoemission from a Biased Metal Surface (in session "3.2 Intense Electron and Ion Beams")

Experiment on the propagation of relativistic pulsed electron beam in plasma (in session "1.4 Partially Ionized Plasmas")

EXPERIMENTAL CHARACTERIZATION OF A W-BAND PHOTONIC INTERACTION KLYSTRON (in session "2.2 Fast-Wave Devices and 2.4 Vacuum Microelectronics and THz Devices")

Experimental demonstration of a laser proton accelerator with accurate beam control through image-relaying transport (in session "4.2 Particle Acceleration with Laser and Beams")

Experimental observations of a high-pressure, 750-kJ dense plasma focus (in session "4.6 Fast Z Pinches III")

Experimental Performance Evaluation of a 272 GHz Energy-Recirculating Folded Waveguide Traveling-Wave Tube Oscillator (in session "2.2 Fast-Wave Devices and 2.4 Vacuum Microelectronics and THz Devices")

Experimental results from the 1.2 MA, 2.2 m diameter linear transformer driver cavity at Sandia National Labs (in session "7.4 Linear Tranformer Driver")

Experimental Results of a Metamaterial-Enhanced Resistive Wall Amplifier Prototype* (in session "2.1 Intense Beam Microwave Generation")

Experimental Study of a Millimeter Wave Relativistic Backward Wave Oscillator* (in session "2.3 Slow-Wave Devices")

EXPERIMENTAL STUDY OF FAST DEUTERONS AND ELECTRONS IN DPF FUSION PLASMA (in session "4.1 Fusion (Inertial, Magnetic and Alternate Concepts)")

Experimental study of graphite electrode erosion under premixed atmosphere in spark gap switch (in session "5.1 & 5.2 Opening and Closing Switches I")

Experimental, analytical and computational studies of electron gun grid heating (in session "3.1 Plasma, Ion, and Electron Sources I")

Exploring Properties of Warm Dense Matter Using Microsecond Timescale Pulse Power Drive (in session "4.4 High Energy Density Matter")

Exploring Signatures of Inner MITL Plasma Formation using Dedicated Experimental Platforms at the Z Pulsed Power Facility (in session "9.3 Pulsed Power Diagnostics")

Fabrication and Characterization of Diamond Field Emitter Array Cathodes (in session "3.1 Plasma, Ion, and Electron Sources II")

Factors Influencing the Efficiency of an Induction Coilgun (in session "8.1 Electromagnetic Launch")

FEATURES OF LASER PRODUCED ANNULAR PLASMAS USING DIFFERENT TARGET MATERIALS AND AMBIENT CONDITIONS (in session "4.3 Radiation Physics & X-ray Lasers and 4.5 Laser Produced Plasmas")

Feedback from cells: how cancer cells could make cold atmospheric plasma jet selective during treatment (in session "6.5 Biological and Medical Applications I")

FIELD EMISSION PROPERTIES OF VERTICAL AND LOOPED CARBON NANOTUBE FIBERS (in session "3.1 Plasma, Ion, and Electron Sources II")

Field-Aligned Chains within the PK-4 Environment (in session "1.5 Dusty Plasmas and Strongly Coupled Plasmas")

Field-Circuit Coupling Simulation of Petawatt-class Z-Pinch Accelerator (in session "7.2 High Current and High Power Pulsers I")

First implementation of a solid-state Impedance-Matched Marx Generator (in session "7.3 Compact Pulsed Power")

Flash lamps current monitoring using optically insulated FPGA technology under harsh pulsed power environment (in session "9.3 Pulsed Power Diagnostics")

Flyer Acceleration using Underwater Wire Explosions (in session "8.1 Electromagnetic Launch")

Fractional models in solving Maxwell equations and applications (in session "1.2 Computational Plasma Physics I")

FROM MULTIPACTOR TO IONIZATION BREAKDOWN: REVIEW AND RECENT ADVANCES* (in session "Plenary Tues AM - John Verboncoeur (2019 Plasma Science and Applications Award)")

FUNDAMENTAL STUDY OF UNIPOLAR AND RF BREAKDOWN IN ATMOSPHERIC AIR* (in session "5.5 Insulation and Dielectric Breakdown II")

GAS CONCENTRATION DISTRIBUTION NEAR SURFACE IN AN IMPINGEMENT OF ATMOSPHERIC PRESSURE PLASMA JET BY TWO-DIMENSIONAL FILTERED RAYLEIGH SCATTERING (in session "9.1 Optical, X-ray, FIR and Microwave Diagnostics")

GENERALIZED SELF CONSISTENT MODEL FOR TUNNELING CURRENT IN DISSIMILAR METAL-INSULATOR-METAL JUNCTIONS (in session "1.1 Basic Phenomena III")

Generating an imploding rotating plasma in MagLIF targets (in session "4.1 Fusion (Inertial, Magnetic and Alternate Concepts)")

Generation of Intense Pulsed X-ray and Repetitive Pulsed X-rays (in session "3.2 Intense Electron and Ion Beams")

GTO Like Thyristors Triggered in Impact-Ionization Wave Mode (in session "5.1 & 5.2 Opening and Closing Switches II")

High Field RF Breakdown of Pressurized SF$_{6}$ (in session "5.5 Insulation and Dielectric Breakdown II")

High Power Amplification Experiments on a Recirculating Planar Crossed-Field Amplifier (in session "2.1 Intense Beam Microwave Generation")

HIGH POWER DIELECTRIC DIODE STUDIES AT SANDIA NATIONAL LABORATORY (in session "7.2 High Current and High Power Pulsers I")

High sensitivity HEH monitor (in session "5.1 & 5.2 Opening and Closing Switches I")

HIGH VOLTAGE COAXIAL VACUUM GAP BREAKDOWN FOR PULSED POWER LINERS (in session "4.6 Fast Z Pinches II")

High-Power Microwave Generation by a Double-Anode Virtual Cathode Oscillator (in session "2.1 Intense Beam Microwave Generation")

High-Power Testing of W-Band Accelerator Cavities (in session "2.2 Fast-Wave Devices and 2.4 Vacuum Microelectronics and THz Devices")

High-temperature uranium plasma chemistry (in session "1.6 Plasma Chemistry")

Hot electron emission processes in waveguide integrated graphene (in session "1.1 Basic Phenomena I")

Hyperfine structure and isotopic shift analysis of uranium transitions using LIF of laser-produced plasma (in session "9.1 Optical, X-ray, FIR, and Microwave Diagnostics and 9.3 Pulsed Power Diagnostics")

Identification of the Corona Point in Point-to-Plane Geometries in Atmospheric Air (in session "1.1 Basic Phenomena II")

Ignition Mechanisms of Polymer Bonded Explosives during Drilling (in session "7.1 Explosive Power Generators")

Implosion dynamics and magneto-Rayleigh-Taylor instability in gas-puff z-pinch experiments at 1-MA (in session "4.6 Fast Z Pinches II")

Importance of RF Measurements in Pulsed-Plasma Applications (in session "9.1 Optical, X-ray, FIR, and Microwave Diagnostics and 9.3 Pulsed Power Diagnostics")

Importing CAD-Generated Device Geometry to the Neptune EM-PIC Simulation Code (in session "2.5 Codes and Modeling")

Improving Fast SiC MOSFET Switching Using an Inductive Gate Drive Approach (in session "5.1 & 5.2 Opening and Closing Switches II")

INCEPTION VOLTAGE FOR ELECTRICAL DISCHARGES IN THE PRESENCE OF TRIPLE JUNCTIONS (in session "5.5 Insulation and Dielectric Breakdown I")

Inception Voltage for Corona-like Discharges Generated with 100-ns High Voltage Pulses in Water Depending on Pulse Shape and Water Conductivity (in session "6.1 Nonequilibrium Plasma Applications III")

Inclusion of Circuit Loss in an Exact Treatment of a Helix Traveling Wave Tube (in session "2.3 Slow-Wave Devices")

Incoherent laser Thomson scattering diagnostics for streamer discharge in He gas (in session "9.1 Optical, X-ray, FIR and Microwave Diagnostics")

INCORPORATING RESISTANCE INTO THE UNIFICATION OF FIELD EMISSION AND SPACE CHARGE-LIMITED EMISSION WITH COLLISIONS (in session "3.2 Intense Electron and Ion Beams")

Increasing the Pulse Repetition Rate for Solid State Thyratron Replacements (in session "5.1 & 5.2 Opening and Closing Switches I")

Inductively Coupled Plasma at Atmospheric Pressure, a Challenge for Miniature Devices (in session "2.7 Microwave Plasma Interaction III")

INFLUENCE OF THE CONCENTRATION ON SURFACE FLASHOVER OF THE EPOXY INSULATOR UNDER LIGHTENING IMPULSE VOLTAGE IN C4F7N-CO2 MIXTURES (in session "5.5 Insulation and Dielectric Breakdown I")

Influencing Factors and Error Analysis of Pulse Current Measurement With Air-core Rogowski Coil (in session "9.1 Optical, X-ray, FIR, and Microwave Diagnostics and 9.3 Pulsed Power Diagnostics")

Integrated Klystron Test Stand (in session "8.5 Power Supplies and Modulators II")

Integrated Photonics for Low Transverse Emittance, Ultrafast Negative Electron Affinity GaAs Photoemitters (in session "3.1 Plasma, Ion, and Electron Sources II")

Inter-Digital Magnetron and Rippled-Field Magnetron: Two Remarkable Reincarnations of a Voltage-Tunable Magnetron* (in session "2.1 Intense Beam Microwave Generation")

Investigating Ion Energy Partitioning in Gas-puff Z-pinches with Thomson Scattering (in session "4.6 Fast Z Pinches II")

Investigation into the Reliability of Commercial 1.2-kV SiC MPS Diodes under Surge Current and Avalanche Events (in session "10.1/10.2 Converters, Components,Magnetics, Swiches and Capacitors")

Investigation of Atmospheric Pressure Plasma Jet in Double Coaxial Dielectric Barrier Tubes Conjugated with Microsecond Voltage Pulse (in session "6.1 Nonequilibrium Plasma Applications II")

Investigation of electrical breakdown in high pressure (0.1 to 1 MPa) carbon dioxide and its mixtures under pulsed fields (in session "5.5 Insulation and Dielectric Breakdown I")

Investigation of Insulated Wire Breakdown Under DC and Lightning Impulse Conditions (in session "5.5 Insulation and Dielectric Breakdown I")

Investigation of Low Amplitude Lighting Strikes On Low Voltage Electrical Systems (in session "10.3 System Modeling, Thermal, EMI and Circuits")

Investigation of Sterolithographic Laser Additive Manufacturing Resins for Pulsed Power Applications (in session "5.5 Insulation and Dielectric Breakdown III")

Investigation on the early stage plasma instabilities in magnetized cylindrical liners (in session "4.6 Fast Z Pinches II")

Investigations on the Energy Chain supporting a Naval Railgun (in session "8.1 Electromagnetic Launch")

Irradiation of silicon targets by outflows emitted by conical wire array Z-pinches. (in session "4.6 Fast Z Pinches I")

KINETIC MODELING OF ION THRUSTER PLUME PLASMA SURFACE INTERACTIONS (in session "6.3 Plasma Thrusters")

Laboratory Astrophysics - Cold Absorption (in session "4.7 Plasma Material Interactions")

Large Scale System Using Pulsed Electric Fields as an Invasive Fish Barrier (in session "7.2 High Current and High Power Pulsers I")

Laser triggered solid state pulse charging system utilizing GaAs PCSS technology (in session "5.1 & 5.2 Opening and Closing Switches II")

Laser-Driven Semiconductor Switch for Generating Nanosecond Pulses from a Megawatt Gyrotron (in session "2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications")

Least-Square Weighted Residual Methods for Solution of Global Model Equations (in session "2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications")

Limits to High Power Amplification (in session "2.1 Intense Beam Microwave Generation")

Low energy electron irradiation induced charging of dielectric materials: measurements and analyses. (in session "1.3 Space Plasmas")

Low Energy Laser Triggering at 1535 nm (in session "7.3 Compact Pulsed Power")

Low-Impedance S-Band MILO (in session "2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications")

Low-Inductance Load Test of a New 300-kA, 150-ns Pulser for Fast X-Pinch Sources (in session "7.4 Linear Tranformer Driver")

Lumped Circuit Model of Multi-Pulse Laser Triggered Gas Switch with Braginskii Resistivity (in session "10.3 System Modeling, Thermal, EMI and Circuits")

M3: A New Pulsed Power Machine Dedicated to Inertial Confinement Fusion Experiments (in session "7.2 High Current and High Power Pulsers II")

Macroparticle combination algorithm for plasma PIC simulation (in session "1.2 Computational Plasma Physics II")

Magnetic Shielding Effectiveness of Layered Medium-Walled Structures (in session "8.1 Electromagnetic Launch")

Map-Based Multipactor Theory for Two-Carrier Operation (in session "2.6 Non-Fusion Microwave Systems and 2.7 Microwave Plasma Interaction I")

Mapping of 2-D plasma-induced fluid flow using particle image velocimetry (in session "1.6 Plasma Chemistry")

Mathematical Modeling of Tumor Growth and Response to Electrochemotherapy (in session "6.5 Biological and Medical Applications II")

Measurement of Photoionization Rates and Quenching Pressures (in session "1.4 Partially Ionized Plasmas")

Measurements of the Characteristics of Plasma Plume Generated by Low Energy Surface Flashover (in session "6.3 Plasma Thrusters")

MHD Modeling of Shock Physics Experiments with the PHELIX Portable High Magnetic Field Driver (in session "7.2 High Current and High Power Pulsers I")

Microorganism inactivation with Electric Pulses and Drugs (in session "6.5 Biological and Medical Applications I")

Microplasma Photonic Crystals Beyond Three-Dimensions (in session "6.1 Nonequilibrium Plasma Applications III")

Microscale Gas breakdown voltage dependence on electrode surface (in session "1.1 Basic Phenomena I")

Microsecond Fast, 100 kV Modular Pulse Charger (in session "7.3 Compact Pulsed Power")

Modeling DSX Plasma Interactions Using Nascap-2k (in session "1.3 Space Plasmas")

Modeling of Fluxes and Surface Coverage of Plasma-Produced Species on Artificial Bone Scaffolding (in session "6.5 Biological and Medical Applications I")

MODELING STABILITY OF VACUUM ELECTRONIC DEVICES USING GENERALIZED IMPEDANCE MATRIX APPROACH (in session "2.3 Slow-Wave Devices")

Modification of the Hodgkin-Huxley wave behavior by electroporation (in session "6.4/6.5 Environmental, Biological, and Medical Applications")

Modular design of a radial scaled Hall Thruster for different magnetic configurations (in session "6.3 Plasma Thrusters")

Modulational instability and study of freak waves in an ion beam plasma with two temperature superthermal electrons (in session "1.3 Space Plasmas")

Multi-Species Plasma-Electromagnetic Models for Pulsed Power Applications (in session "1.2 Computational Plasma Physics III")

Multipactor dynamics under obliquely incident rf electric field (in session "2.7 Microwave Plasma Interaction II")

Multiple Beam Power Grid Tubes for High Frequency and High Power Operation (in session "2.3 Slow-Wave Devices")

Multispecies Nonequilibrium Plasma Fluid Simulation of an Ablating Arc Discharge in Atmospheric Pressure (in session "6.1 Nonequilibrium Plasma Applications II")

Nanosecond Rise-time, Laser Diode Driven, Wide Bandgap Photoconductive Switches as Fast, High-Voltage MOSFET Replacements for Bioelectrics and Accelerator Applications*,† (in session "5.1 & 5.2 Opening and Closing Switches II")

Nanosecond-pulsed corona discharge in liquid nitrogen and production of nitrogen polymers (in session "6.1 Nonequilibrium Plasma Applications II")

Nanosecond-pulsed oxygen DBD treatment of water and production of "plasma acid" (in session "6.1 Nonequilibrium Plasma Applications II")

Nernst Thermomagnetic Waves in Magnetized High Energy Density Plasmas (in session "4.4 High Energy Density Matter")

New Marx based generator using IGBTs for adjustable quasi-rectangular pulses (in session "7.3 Compact Pulsed Power")

New insights in pulsed power driven explosion of underwater wires and wire arrays (in session "4.6 Fast Z Pinches I")

New type of capacitor-switch assembly for LTD technology (in session "7.4 Linear Tranformer Driver")

NITRIC OXIDE SCAVENGING OF HYDROXYL RADICALS IN A NANOSECOND PULSED PLASMA DISCHARGE GAS-LIQUID REACTOR (in session "6.4 Environmental, Industrial, and Display Applications II")

NO PLIF flow visualization and time-resolved temperature distribution measurements in laser induced breakdown plumes (in session "4.3 Radiation Physics & X-ray Lasers and 4.5 Laser Produced Plasmas")

Nonlinear Electron Power Absorption in Capacitively Coupled Radio Frequency Discharges (in session "1.1 Basic Phenomena II")

Numerical Analysis of Direct-drive Golden Double-shell Implosion (in session "4.1 Fusion (Inertial, Magnetic and Alternate Concepts)")

Numerical Analysis of the Magnetic Expansion Force on the Solenoid Coil in a Four-stage Induction Coilgun with Pulsed Power Supplies (in session "8.1 Electromagnetic Launch")

NUMERICAL EVALUATIONS OF ENERGY-DEPENDENT SECONDARY ELECTRON EMISSION BY INCIDENT ELECTRONS AND CHARGED IONS* (in session "2.6 Non-Fusion Microwave Systems and 2.7 Microwave Plasma Interaction I")

Numerical model of acoustic wave generated by free-burning AC arc (in session "1.2 Computational Plasma Physics III")

Numerical study of a coaxial electron sheath (in session "1.2 Computational Plasma Physics I")

Numerical study on magneto-Rayleigh-Taylor instabilities for thin liner implosions on the PTS facility (in session "4.6 Fast Z Pinches II")

Observation of positive and negative nanosecond pulsed streamers in a coaxial electrode using a quadruple emICCD camera system (in session "1.1 Basic Phenomena II")

OLMAT: A NEW FACILITY FOR THE STUDY OF MATERIALS EXPOSED TO PLASMA AND LASER INDUCED HIGH THERMAL LOADS AT THE LABORATORIO NACIONAL DE FUSION (in session "4.7 Plasma Material Interactions")

On the VUV optical emission of N-APPJs (in session "6.4/6.5 Environmental, Biological, and Medical Applications")

On three different ways to quantify the degree of ionization in sputtering magnetrons (in session "1.1 Basic Phenomena II")

Optical and electrical diagnostic of surface arcs (in session "6.2 High-Pressure and Thermal Plasma Processing")

Optical Imaging of the Self Magnetic Pinch Diode on the Merlin IVA (in session "3.2 Intense Electron and Ion Beams")

Optimal Design of a High Voltage High Frequency Transformer and Power Drive System for Long Pulse Modulators (in session "8.5 Power Supplies and Modulators II")

Optimization of a Folded Waveguide Traveling Wave Tube Using Impedance Matrices (in session "2.5 Codes and Modeling")

Optimizing Power Delivery using Impendence Matching Networks with Set-Point and Frequency Tuning for Pulsed Inductively Coupled Plasmas (in session "6.4 Environmental, Industrial, and Display Applications II")

Overview and challenges of partially magnetized plasma modeling (in session "1.4 Partially Ionized Plasmas")

Packaging and Evaluation of 100 kV Photoconductive Switches (in session "5.1 & 5.2 Opening and Closing Switches I")

Parametric Interaction of VLF and ELF Waves and Impact on Energetic Electrons in a Radiation Belt (in session "1.3 Space Plasmas")

Particle Emission Investigation from an Anode Liquid Surface of Electrolyte in Atmospheric Pressure DC Glow (in session "1.1 Basic Phenomena I")

Particles charge dissipation in Ku-band relativistic HPM source (in session "2.2 Fast-Wave Devices and 2.4 Vacuum Microelectronics and THz Devices")

Pattern Dependent Profile Distortion in Plasma Etching of High Aspect Ratio Features (in session "6.1 Nonequilibrium Plasma Applications I")

Performance Comparison of Commercial GaN HEMT under Repetitive Overcurrent Operations (in session "5.1 & 5.2 Opening and Closing Switches II")

PERFORMANCE PORTABLE FINITE VOLUME MAGNETOHYDRODYNAMICS FOR THE EXASCALE ERA (in session "2.5 Codes and Modeling")

Perspectives on Research in Computational Plasma Physics with Diverse Applications to Experiments (in session "Plenary Fri - Bruce Cohen (2018 Charles K. Birdsall Award)")

Photonic Doppler Velocimetry (PDV) of Bare and Dielectric-Coated Aluminum Exploded by Intense Current (in session "4.6 Fast Z Pinches I")

Physical Experiments on the HEAVEN-I KrF Laser Facility (in session "4.3 Radiation Physics & X-ray Lasers and 4.5 Laser Produced Plasmas")

Plasma assisted Chemical Looping reactions using nano-catalysts for co-production of syngas and hydrogen (in session "6.1 Nonequilibrium Plasma Applications I")

Plasma Formation and Ablation Dynamics of Metallic Liner (in session "4.6 Fast Z Pinches III")

Plasma Kinetics Study of a Repetitive 10-ns Pulsed Plasma Ignition for Combustion (in session "9.1 Optical, X-ray, FIR, and Microwave Diagnostics and 9.3 Pulsed Power Diagnostics")

Plasma Kristall-4: Anomalous diffusion and vorticity in a multi-chain dusty plasma (in session "1.5 Dusty Plasmas and Strongly Coupled Plasmas")

Plasma polymerization of N,N-dimethylacrylamide: cell-repellent or cell-adhesive coatings? (in session "6.5 Biological and Medical Applications I")

PLASMA PROPAGATION SPEED MODEL FOR INVESTIGATION OF ELECTRON TEMPERATURE AND PLASMA DENSITY OF AR PLASMA IN ATMOSPHERIC PRESSURE MICRO-DBD (in session "1.4 Partially Ionized Plasmas")

Plasma Uniformity Control Technology of ICP Dry Etcher Equipment for Medium and Large Display (in session "6.4 Environmental, Industrial, and Display Applications II")

PORTABLE SHORT PULSE NEUTRON SOURCE FOR IDENTIFCATION AND LOCALIZATION OF CLANDESTINE NUCLEAR MATERIALS (in session "7.3 Compact Pulsed Power")

POTOMAC: towards a realistic secondary and backscattered emission model for the multipactor (in session "4.7 Plasma Material Interactions")

Power Consumption in a Miniature Microwave Inductively Coupled Plasma Source (in session "3.1 Plasma, Ion, and Electron Sources I")

Practical Tunable Electrically Small Antenna Design for Transportable Ionospheric Heating (in session "2.6 Non-Fusion Microwave Systems and 2.7 Microwave Plasma Interaction I")

PREDICTING SECONDARY ELECTRON YIELD FROM FIRST PRICIPLES CALCULATIONS (in session "2.7 Microwave Plasma Interaction II")

Problems of development a cold-cathode magnetron in pulse mode for application in an accelerator (in session "2.1 Intense Beam Microwave Generation")

Progress of beam driven plasma acceleration at FLASHForward (in session "4.2 Particle Acceleration with Laser and Beams")

Propagation process of streamers and time history of reduced electric field during nanosecond pulsed discharge in coaxial electrode in atmospheric air (in session "9.1 Optical, X-ray, FIR, and Microwave Diagnostics and 9.3 Pulsed Power Diagnostics")

Proton Driven Plasma Wakefield Acceleration: AWAKE at CERN - Concept, Experiment and Latest Results (in session "4.2 Particle Acceleration with Laser and Beams")

Pulse Compression Considerations for High Current Ranchero Generators (in session "7.1 Explosive Power Generators")

Pulsed mechanical device generates plasma in water via cavitation (in session "1.1 Basic Phenomena III")

PULSED POWER AND TRANSIENT PLASMA WITH BIOMEDICAL, DEFENSE, ENERGY, AND ENVIRONMENTAL APPLICATIONS (in session "Plenary Mon AM - Martin Gundersen")

Pulsed Power as a Science: Predictive simulations for beams, z-pinches, and other applications (in session "Plenary Thurs - Thomas Mehlhorn (2019 Peter Haas Award)")

Pulsed Resonant Charging Power Supply for the Spallation Neutron Source Extraction Kicker PFN System (in session "8.5 Power Supplies and Modulators I")

Quantification of OH radicals generated by nanosecond pulsed discharge plasma (in session "6.2 High-Pressure and Thermal Plasma Processing")

Quantum effects in electron emission from nanodiamond (in session "1.1 Basic Phenomena I")

Radiative stabilization of the shock-driven interfacial instabilities in double-shell targets (in session "4.1 Fusion (Inertial, Magnetic and Alternate Concepts)")

Re-orientation of BN nanosheet induced by pulsed electric field and its effect on thermal properties of epoxy resin-based nanocomposites (in session "8.5 Power Supplies and Modulators I")

Reactivity Characterization Due to Ozone Generation by Low-Temperature Plasma Discharges at Engine Relevant Densities (in session "1.6 Plasma Chemistry")

Rep-rated Testing of a Compact Magnetron with Diffraction Output (MDO) and Plans for Testing the Full MDO* (in session "2.1 Intense Beam Microwave Generation")

Research on Distribution Problem of Overvoltage Online Monitoring Device on Distribution Lines (in session "5.2 & 5.3 Transmission Lines and Transformers and High Energy Density Storage")

Researches on spectrums and macroscopic forms of DC arc in a short air gap (in session "5.5 Insulation and Dielectric Breakdown I")

RF plasma based Nanostructurization of Tungsten for Plasma Facing Component Material Applications (in session "4.7 Plasma Material Interactions")

Roadmap on the Development of Klystron Modulators for ESS (in session "8.5 Power Supplies and Modulators II")

ROLE OF PHOTON PROCESSES IN THE RF BREAKDOWN OF AIR* (in session "2.6 Non-Fusion Microwave Systems and 2.7 Microwave Plasma Interaction I")

ROLE OF TEMPERATURE IN ELECTRICAL BREAKDOWN AT TRIPLE JUNCTIONS (in session "5.5 Insulation and Dielectric Breakdown II")

Saturating Pulse Transformer Circuits Using Advanced Magnetic Materials (in session "8.5 Power Supplies and Modulators II")

SECONDARY ELECTRON YIELD MEASUREMENTS ON MATERIALS OF INTEREST TO HIGH VACUUM ELECTRONIC COMMUNICATION DEVICES (in session "2.7 Microwave Plasma Interaction II")

Shaped Beams from Diamond Field-Emitter Array Cathodes (in session "3.1 Plasma, Ion, and Electron Sources II")

Shock waves generated by underwater electrical explosion of a single wire (in session "4.6 Fast Z Pinches I")

Shocks induced by fast high-fluence electron beam deposition on Aluminum targets: hydrodynamic simulations initialized by electron beam measurements. (in session "3.2 Intense Electron and Ion Beams")

Simulations of transient multipactor suppression due to dielectric surface charging (in session "1.1 Basic Phenomena III")

Single cell laser mediated molecule delivery – infrared laser based microinjection (in session "6.5 Biological and Medical Applications II")

Single-step Synthesis of Molybdenum Carbide Nanoparticles by Wire Explosion Process (in session "6.2 High-Pressure and Thermal Plasma Processing")

SOLAR WIND DRIVEN WHISTLER INSTABILITY IN EARTH’S CUSP REGION (in session "1.3 Space Plasmas")

Spatially and temporally resolved measurements of load current delivery on the Z Pulsed Power Facility using the Z Line VISAR diagnostic (in session "9.3 Pulsed Power Diagnostics")

Spatio-temporal dynamics of pulsed gas breakdown in microgaps (in session "5.5 Insulation and Dielectric Breakdown III")

Species Dynamics in Ar/H Plasma Supporting Actinometry Diagnostics Correlation Experiments (in session "1.6 Plasma Chemistry")

Speed-limited Particle-in-cell for Fast Simulation of Slow-plasma Problems (in session "1.2 Computational Plasma Physics I")

SPLITS - RECONFIGURABLE 5.5 OHM SERIES PULSE FORMING LINES FOR MULTIPLE 300KV PULSE CREATION (in session "7.2 High Current and High Power Pulsers II")

Staged Z-pinch Experiments and Simulations Using Different Gas Shells (in session "4.6 Fast Z Pinches III")

STAGNATION PERFORMANCE SCALING OF MAGNETIZED LINER INERTIAL FUSION (in session "4.1 Fusion (Inertial, Magnetic and Alternate Concepts)")

Statistics and Propagation Modeling of Atmospheric Lightning (in session "1.2 Computational Plasma Physics III")

Study of Cockcroft-Walton Multipliers Driven by AC Sources with Limited Current (in session "10.1/10.2 Converters, Components,Magnetics, Swiches and Capacitors")

Study of Electron Optics System for a 300 GHz Sheet Electron Beam Traveling-Wave Tube (in session "2.2 Fast-Wave Devices and 2.4 Vacuum Microelectronics and THz Devices")

Study of plasma catalyst interactions by time resolved diffuse reflectance infrared Fourier transform spectroscopy (in session "6.1 Nonequilibrium Plasma Applications II")

Study of the effects of laser pulse intensity modulations on the plasma oscillations and electron energy gain in the bubble regime. (in session "4.2 Particle Acceleration with Laser and Beams")

Study on aging characteristics of DC transmission line arrester considering impact load (in session "5.1 & 5.2 Opening and Closing Switches I")

Study on Insulation Characteristics Evolution of Oil-impregnated Paperboard under Mechanical Stress (in session "5.5 Insulation and Dielectric Breakdown III")

Supported vanadium oxides modified by non-thermal plasma for nitrogen fixation (in session "6.1 Nonequilibrium Plasma Applications II")

Sustained Fusion Reactions from a Sheared-Flow-Stabilized Z Pinch (in session "Plenary Tues PM - Uri Shumlak")

Switching Characterization of Multi-gap and Multi-aperture High Power Pseudospark Switch (PSS) (in session "5.1 & 5.2 Opening and Closing Switches II")

Technique to determine intense electron beam parameters and X-ray spectra from dose-rate measurements at different angles* (in session "7.2 High Current and High Power Pulsers II")

TEMPORAL STUDY OF DUAL FREQUENCY MULTIPACTOR ON A DIELECTRIC (in session "2.7 Microwave Plasma Interaction II")

Test beds for electron emission studies (in session "3.1 Plasma, Ion, and Electron Sources I")

The cell activation phenomena in the cold atmospheric plasma cancer treatment (in session "6.5 Biological and Medical Applications II")

The Current State of Custom Pulse Power Cores Supplied by Metglas Inc. (in session "10.1/10.2 Converters, Components,Magnetics, Swiches and Capacitors")

The Development of all-solid pulse generator based on multi-turn LTD (in session "7.4 Linear Tranformer Driver")

The developments of Linear Transformer Drivers in Xi’an Jiaotong University (in session "7.4 Linear Tranformer Driver")

The effect of applied voltage on the laminar-turbulent transition in atmospheric- pressure plasma jet (in session "6.1 Nonequilibrium Plasma Applications III")

The effective way of improving the performance of a novel multipacting cathode with high current density (in session "3.2 Intense Electron and Ion Beams")

The Effects of Multipactor on the Quality of a Signal in a Transmission Line (in session "2.7 Microwave Plasma Interaction II")

The Experimental Study of Time Resolved Inductively Coupled Plasma for Fast Control of High Power Millimeter-wave (in session "2.7 Microwave Plasma Interaction III")

The HED instrument at the European XFEL (in session "4.3 Radiation Physics & X-ray Lasers and 4.5 Laser Produced Plasmas")

The influence of microwave pulse length and repetition rate on laminar burning velocity in lean methane-air flames (in session "1.6 Plasma Chemistry")

THE INFLUENCE OF SURFACE HUMIDITY ON DISINFECTION USING COLD PLASMAS (in session "6.5 Biological and Medical Applications II")

The interaction of a high-power sub-nanosecond microwave pulse with preliminarily formed plasma in a waveguide (in session "2.7 Microwave Plasma Interaction III")

THE MICHELLE CODE: LATEST FEATURES AND ADVANCED APPLICATIONS (in session "2.5 Codes and Modeling")

The preliminary experiment of driven pressure enhancement by hybrid drive on ShenGuang Laser facility (in session "4.1 Fusion (Inertial, Magnetic and Alternate Concepts)")

The rigid-beam model as a test case for simulations of plasma generated by an intense electron beam (in session "1.2 Computational Plasma Physics II")

The Story of the LTD Development (in session "Plenary Wed - Alexander Kim (2019 Erwin Marx Award)")

The Wendelstein 7-X Stellarator: Plasma Generation, Heating and Current-Drive with the Worldwide Largest Electron Cyclotron Heating Facility (in session "Plenary Mon PM - Manfred Thumm (2018 NPSS Merit Award)")

Theoretical investigation of a novel microwave driven ICP plasma jet (in session "2.7 Microwave Plasma Interaction III")

Theoretical investigation of the magnetic asymmetry effect by using a lumped element model (in session "1.1 Basic Phenomena I")

Theory for Self-organized Patterns on Liquid Anodes (in session "4.7 Plasma Material Interactions")

Thermionic and Field emission model of 2D materials cathode (in session "3.2 Intense Electron and Ion Beams")

Thomson Scattering Measurements of Bow-shocks in Radiatively-cooled Magnetically Accelerated Plasma Flows (in session "4.4 High Energy Density Matter")

Thomson Scattering on Laboratory Plasma Jets to Study Current Polarity Effects (in session "4.6 Fast Z Pinches I")

Three-Dimensional Model of the Saturn Accelerator Water Tri-plate Transmission Line Connection to the Vacuum Insulator Stack (in session "10.3 System Modeling, Thermal, EMI and Circuits")

Thrust-to-power ratio improvement of micro-cathode arc thruster by addition of the magnetoplasmadynamic stage (in session "6.3 Plasma Thrusters")

THz Structures for MeV Electron Bunch Compression (in session "2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications")

THz Wakefield Source Powered by Nonrelativistic Electron Beam (in session "2.5 Codes and Modeling and 2.8 THz Sources, Radiation, and Applications")

TIME EVOLUTION OF HARD X-RAY CHARACTERISTIC EMISSION FROM TUNGSTEN PULSED-POWER PLASMAS (in session "4.3 Radiation Physics & X-ray Lasers and 4.5 Laser Produced Plasmas")

Time-dependent behavior of capillary discharge devices for plasma-wakefield acceleration (in session "4.2 Particle Acceleration with Laser and Beams")

Time-Dependent Helical Magnetic Field Effects on Cylindrical Liner Implosions (in session "4.6 Fast Z Pinches II")

Toward a Wideband and High-Isolation Power Limiter (in session "2.7 Microwave Plasma Interaction III")

Transient Loading of Ultracapacitors* (in session "10.1/10.2 Converters, Components,Magnetics, Swiches and Capacitors")

Transient Plasma-based Remediation of Nanoscale Particulate Matter (in session "6.1 Nonequilibrium Plasma Applications I")

Transients on Arc and Convertor currents in the Multicusp Cesiated Surface Conversion H - Source at LANSCE (in session "3.1 Plasma, Ion, and Electron Sources I")

Transition of low-temperature plasma similarity laws from low to high ionization degree regimes* (in session "1.2 Computational Plasma Physics I")

Tripple langmuir Probe diagnostic for vacuum arc thrusters (in session "6.3 Plasma Thrusters")

Ultra-High Voltage NanoDielectrCapacitor Development, and Testing for Compact Pulsed Power* (in session "7.3 Compact Pulsed Power")

Upgrade of the Spallation Neutron Source Injection and Extraction Kicker Pulse Verification Systems (in session "9.3 Pulsed Power Diagnostics")

USE OF HERMES-III FOR PULSED NEUTRON PRODUCTION PRODUCED BY INTENSE ION BEAMS AT THE 14 MEV LEVEL AT SANDIA NATIONAL LABORATORIES* (in session "3.2 Intense Electron and Ion Beams")

Using Coupled Dust Motion to Analyze Plasma-Dust Interactions (in session "1.2 Computational Plasma Physics III")

Vacuum Insulator Flashover of Ultra High Vacuum Compatible Insulators (in session "5.5 Insulation and Dielectric Breakdown II")

Vacuum Outgassing Study of Candidate Materials for Next Generation Pulsed Power and Accelerators: Improving the Boundary Conditions for Molecular Flow Simulations (in session "5.5 Insulation and Dielectric Breakdown II")

VARIABLE-FREQUENCY CAPACITIVELY COUPLED PLASMA AS A TUNABLE RF ELEMENT (in session "2.7 Microwave Plasma Interaction III")

Vlasov-Poisson simulation of current-carrying ion acoustic instability: nonlinear saturation and ion kinetics (in session "1.1 Basic Phenomena III")

W-band 2D Periodic Lattice Oscillator (in session "2.3 Slow-Wave Devices")

Include materials from selected contributions

Events scheduled on*

22/06/2019

23/06/2019

24/06/2019

25/06/2019

26/06/2019

27/06/2019

28/06/2019

Include materials from sessions/contributions scheduled on the selected dates