7th Beam Telescopes and Test Beams Workshop

Session

Beam Telescopes

16 Jan 2019, 11:10

503/1-001 - Council Chamber (CERN)

Conveners

Beam Telescopes

• Simon Spannagel (CERN)

Beam Telescopes

• Lennart Huth (Ruprecht Karls Universitaet Heidelberg (DE))

43. The LYCORIS Telescope at the DESY II Test Beam Facility

Mengqing Wu (Deutsches Elektronen-Synchrotron (DE))

16/01/2019, 11:10

The DESY II Test Beam Facility is one of few facilities around the world capable of providing multi GeV particle beams. It is, as such, a key component in current detector development.
As part of the AIDA2020 project, the LYCORIS telescope was designed based on a hybrid-less silicon strip tracker with a strip pitch of $25 \, \mu \mathrm{m}$ and an active area of $9.3 \times 9.3 \,...

10. CHROMIE - The CMS High Rate Telescope

Nikkie Deelen (CERN)

16/01/2019, 11:30

A new pixel telescope was designed, built and commissioned at CERN for beam tests with prototype modules for the CMS Phase-2 Tracker upgrade. It is based on 16 CMS Phase-1 Barrel Pixel modules, which are of the same type as used in the current CMS pixel detector. In this talk the final design is described and the commissioning of the telescope is discussed. In addition, the first results of...

47. The INSULAb telescope: a modular and versatile tracking system for beam tests

Mattia Soldani (Università degli Studi dell'Insubria & INFN Milano Bicocca)

16/01/2019, 11:50

The main features of the high performance INSULAb telescope are presented. The detector consists of several silicon microstrip layers with different widths and pitches, thus guaranteeing a good compromise between high spatial resolution (down to $\sim 5~\mu\mbox{m}$ for smaller layers owing to analog readout and floating strip scheme) and wide transverse coverage (up to $\sim 10 \times...

57. Timing performance of the Timepix3 telescope

Kevin Heijhoff (Nikhef National institute for subatomic physics (NL))

16/01/2019, 12:10

A beam telescope based on the Timepix3 ASIC was built in order to perform detailed studies of VELO Upgrade prototypes using charged particle beams. The telescope consists of 8 planes of hybrid pixel detectors with 300 um p-on-n silicon sensors, designed to cope with high particle rates using a DAQ system based on Xilinx Virtex 7 FPGA development boards. Tracks measured with the telescope have...

76. The MuPix8 Telescope

Lennart Huth (Ruprecht Karls Universitaet Heidelberg (DE))

16/01/2019, 12:30

Mu3e is going to hunt for the charge lepton flavour violating decay of a antimuon into two positrons and an electron. A high rate of 10^8 muons/s is stopped on a target and the decay vertex as well as the decay particles momenta are reconstructed in a thin four layer pixel tracker in a magnetic field.
High-Voltage monolithic active pixel sensors are chosen as baseline for the tracker as they...

29. A telescope based on MALTA CMOS sensors

Ignacio Asensi Tortajada (Univ. of Valencia and CSIC (ES))

17/01/2019, 11:10

MALTA is a novel monolithic active pixel CMOS sensor chip designed in TowwerJazz 180nm imaging technology for the phase II upgrade of the ATLAS Inner Tracker (ITk) detector. A MALTA telescope has been developed with 6 planes. In this contribution we will review the performance of the telescope in terms of spacial resolution and timing and will be compared with simulations. The results show...

58. mini-VeloPix telescope

Heinrich Schindler (CERN)

The upgrade of the LHCb experiment will transform the experiment to a
trigger-less system reading out the full detector at the LHC collision rate and
up to 2×10$^{33}$cm$^{−2}$ s$^{−1}$ instantaneous luminosity. The Vertex Locator (VELO) is the
silicon detector surrounding the interaction region. The upgraded VELO is based
on a hybrid pixel system equipped with data driven electronics and...