7th Beam Telescopes and Test Beams Workshop

Session

Data Acquisition Tools

17 Jan 2019, 11:30

503/1-001 - Council Chamber (CERN)

Conveners

Data Acquisition Tools

• Lennart Huth (Ruprecht Karls Universitaet Heidelberg (DE))

32. Overview of the modular DAQ hardware designed for beam tests of the HGCAL prototype

Rajdeep Mohan Chatterjee (University of Minnesota (US))

17/01/2019, 11:30

The CMS collaboration has decided to replace the current endcap calorimeters with a new High Granularity Calorimeter (HGCAL) for operations at the High Luminosity LHC (HL-LHC). To validate the design of the HGCAL, prototype detector modules based on silicon pad sensors have been manufactured and tested extensively both in the laboratory and in beam tests. Each prototype module has 128 channels...

54. A versatile data acquisition system based on programmable hardware

Tomas Vanat (CERN)

17/01/2019, 11:50

The process of a detector development includes a subtask concerning the readout of data and controlling the detector. It typically consist of designing hardware in form of a readout board containing programmable logic to provide an interface to the chip, power supplies for biasing the detector chip, as well as DACs and ADCs for setting and measuring operation parameters, test pulses, etc. One...

55. The AIDA-2020 TLU - A trigger/timing unit for beam tests

David Cussans (University of Bristol (GB))

17/01/2019, 12:10

The AIDA-2020 Trigger/timing Logic Unit (TLU) was developed as a successor to the EUDET TLU. It can accept signals to from PMT, NIM or TTL sources and generate a trigger for up to four devices under test (DUTs).

The interface with the DUT can either be an asynchronous two way ( trigger/busy ) handshake used for the EUDET TLU or a synchronous interface with clock , trigger and synchronisation...