Name: CHATS on Applied Superconductivity 2019
Start: 2019-07-09T08:00:00+02:00
End: 2019-07-12T18:00:00+02:00
Location: Faculty of Mechanical Engineering and Mechatronics of the West Pomeranian University of Technology, Szczecin

CHATS on Applied Superconductivity 2019

from Tuesday, July 9, 2019 (8:00 AM) to Friday, July 12, 2019 (6:00 PM)

Monday, July 8, 2019
Tuesday, July 9, 2019

8:30 AM REGISTRATION
REGISTRATION
8:30 AM - 9:20 AM

9:20 AM

9:20 AM - 9:30 AM
9:30 AM Experimental results in support of superconducting system modeling
Experimental results in support of superconducting system modeling
9:30 AM - 10:30 AM
Contributions

9:30 AM Heat transport in tilted stacks of HTS tapes at temperatures above 20K - Łukasz Tomków (University of Cambridge)

10:00 AM Hydraulic characterization of conductor prototypes for fusion magnets - Monika Lewandowska (West Pomeranian University of Technology, Szczecin)
10:30 AM Coffee break
Coffee break
10:30 AM - 10:50 AM
10:50 AM Experimental results in support of superconducting system modeling
Experimental results in support of superconducting system modeling
10:50 AM - 11:50 AM
Contributions

10:50 AM Strand-Jacket Thermal Contact Resistance of REBCO Conductor Measured on Dummy Conductors - Rui Kang

11:20 AM Steady-state transverse heat transfer in a single channel CICC - Aleksandra Dembkowska (West Pomeranian University of Technology, Szczecin)
11:50 AM Electro-mechanical modeling
Electro-mechanical modeling
11:50 AM - 12:50 PM
Contributions

11:50 AM On the Mechanical Behavior of a Nb3Sn Superconducting Coil During a Quench: Three-Dimensional Finite Element Analysis of a Quench Heater Protected Quench - Jose Ferradas Troitino (Universite de Geneve (CH))

12:20 PM LTS magnets electro-mechanical modelling taking into account magnetic iron forces - Douglas Martins Araujo (CERN)
12:50 PM Lunch break
Lunch break
12:50 PM - 2:10 PM
2:10 PM Electro-mechanical modeling
Electro-mechanical modeling
2:10 PM - 2:40 PM
Contributions

2:10 PM Electro-Mechanical FE modeling of CORC® cable configurations based on bending experiments. - Arend Nijhuis (University of Twente)
2:40 PM Electromagnetics
Electromagnetics
2:40 PM - 3:40 PM
Contributions

2:40 PM A-formulation method for full 3D FEM computation of the superconducting magnetization. - Mykola Soloviov (Institute of Electrical Engineering Slovak Academy of Sciences )

3:10 PM Field Quality Analysis in the HTS Dipole Insert-Magnet Feather M2 with the Finite Element Method. - Lorenzo Bortot (CERN)
3:40 PM Coffee break
Coffee break
3:40 PM - 4:00 PM

6:00 PM Guided city walk
Guided city walk
6:00 PM - 8:30 PM
Wednesday, July 10, 2019
9:00 AM Thermo-hydraulic and cryogenics
Thermo-hydraulic and cryogenics
9:00 AM - 10:30 AM
Contributions

9:00 AM Adaptation of the nuclear safety code CATHARE3 to supercritical helium flow. - Sulayman Shoala (CEA/DRF)

9:30 AM Simulation of a cryogenic capillary tube: thermodynamic behavior subjected to heat load. - Maria Barba (CEA (Commissariat à l'Énergie Atomique))

10:00 AM An update of dynamic thermal-hydraulic simulations of the JT-60SA Cryogenic system for preparing plasma operation - François BONNE (CEA)
10:30 AM Coffee break
Coffee break
10:30 AM - 10:50 AM
10:50 AM Thermo-hydraulic and cryogenics
Thermo-hydraulic and cryogenics
10:50 AM - 11:20 AM
Contributions

10:50 AM Parametric study and optimization of the cryo-magnetic system for EU DEMO at the pre-conceptual design phase - Christine Hoa (CEA,IRIG)
11:20 AM Electro-thermal modeling
Electro-thermal modeling
11:20 AM - 12:50 PM
Contributions

11:20 AM Thermal analysis of AC loss heated Nb3Sn coil samples for the High Luminosity upgrade of the LHC. - Kirtana Puthran (CERN)

11:50 AM Electro-thermal 1D model of the SIS100 superconducting dipole magnet. - Piotr Szwangruber (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

12:20 PM PSpice modeling of the inrush and fault currents in a 21 MVA HTS transformer. - Pawel Surdacki (Lublin University of Technology)
12:50 PM Lunch break
Lunch break
12:50 PM - 2:10 PM
2:10 PM Electro-thermal modeling
Electro-thermal modeling
2:10 PM - 3:10 PM
Contributions

2:10 PM 1D and 2D finite-element approaches to extract the resistivity of the superconductor material from pulsed current measurements on HTS commercial tapes. - Nicolo' Riva (EPFL - EPF Lausanne)

2:40 PM Analysis of Current Distirbution during Quench in a Pancake coil wound with REBCO Roebel cable. - Marco Breschi (University of Bologna)
3:10 PM Multiphysics modeling of superconducting devices
Multiphysics modeling of superconducting devices
3:10 PM - 3:40 PM
Contributions

3:10 PM User Defined Elements in ANSYS for Multiphysics Modeling of Superconducting Magnets. - Lucas Brouwer (Lawrence Berkeley National Laboratory)
3:40 PM Coffee break
Coffee break
3:40 PM - 4:00 PM
4:00 PM Multiphysics modeling of superconducting devices
Multiphysics modeling of superconducting devices
4:00 PM - 5:00 PM
Contributions

4:00 PM OLYMPE, a multi-physic platform for fusion magnet design. - Quentin Le Coz (CEA)

4:30 PM Empowering the 4C code for the thermal-hydraulic analysis of coils for the design of future SC tokamaks: a novel, fully-3D model of the TF coil structures. - Roberto Bonifetto (Politecnico di Torino)
7:00 PM Social dinner
Social dinner
7:00 PM - 10:00 PM
Thursday, July 11, 2019
8:55 AM Multiphysics modeling of superconducting devices
Multiphysics modeling of superconducting devices
8:55 AM - 10:00 AM
Contributions

8:55 AM Fundamental description of Field Induced Josephson junctions and devices built on their base. - Krzysztof Pomorski (University College Dublin)

9:25 AM FEM Modeling Of Multilayer Canted Cosine Theta (CCT) Magnets. - Rafal Ortwein / Przemyslaw Wachal
10:00 AM Quench in HTS conductors
Quench in HTS conductors
10:00 AM - 10:30 AM
Contributions

10:00 AM Analysis of quench in HTS conductors for fusion applications: a novel 1D thermal-hydraulic modeling approach. - Andrea Zappatore (Politecnico di Torino)
10:30 AM Coffee break
Coffee break
10:30 AM - 10:50 AM
10:50 AM Quench in HTS conductors
Quench in HTS conductors
10:50 AM - 12:20 PM
Contributions

10:50 AM Study on conditions for successful quench protections of coils wound with coated conductors by short-sample experiments and quench simulations. - Naoyuki Amemiya (Kyoto University)

11:20 AM Modelling of a 50 kA REBCO Conductor with Multi-strand Made by Twisted Stacked Tapes. - Rui Kang

11:50 AM Design and analysis of HTS subsize-conductors for quench investigations towards future HTS fusion magnets. - Michael Wolf (Karlsruhe Institute of Technology (KIT))
12:20 PM Quench and thermo-hydraulic LTS
Quench and thermo-hydraulic LTS
12:20 PM - 12:50 PM
Contributions

12:20 PM Quench Thermohydraulic Analysis of Tore Supra/WEST TF Coil and Smooth Quench Occurrence in Tokamak. - Sylvie NICOLLET (CEA)
12:50 PM Lunch break
Lunch break
12:50 PM - 2:10 PM
2:10 PM Quench and thermo-hydraulic LTS
Quench and thermo-hydraulic LTS
2:10 PM - 3:40 PM
Contributions

2:10 PM Numerical Investigation of Quench Event in the Innermost Pair of the KSTAR Central Solenoids. - Dong Keun Oh

2:40 PM Quench Protection Design of the HL-LHC Hollow Electron Lens System. - Michal Maciejewski (Technical University of Lodz(PL))

3:10 PM Towards to Quench Limit Determination of Superconducting Magnet with use of Thermal-Electrical Analogy - Dariusz Bocian (Institute of Nuclear Physics Polish Academy of Sciences (Kraków, PL))
3:40 PM Coffee break
Coffee break
3:40 PM - 4:00 PM
4:00 PM
4:00 PM - 5:00 PM
Contributions

4:00 PM Workshop wrap-up
Friday, July 12, 2019

7:45 AM Wendelstein 7-X tour
Wendelstein 7-X tour
7:45 AM - 4:00 PM

Choose timezone