CHATS on Applied Superconductivity 2019

from Tuesday, July 9, 2019 (8:00 AM) to Friday, July 12, 2019 (6:00 PM)
Faculty of Mechanical Engineering and Mechatronics of the West Pomeranian University of Technology, Szczecin

        : Sessions
    /     : Talks
        : Breaks
Jul 9, 2019
Jul 10, 2019
Jul 11, 2019
Jul 12, 2019
AM
8:30 AM --- REGISTRATION ---
9:20 AM
Opening welcome - Krzysztof Danilecki Monika Lewandowska (West Pomeranian University of Technology, Szczecin) (until 9:30 AM) ()
9:30 AM
Session I - Arend Nijhuis (University of Twente) (until 10:30 AM) ()
9:30 AM Heat transport in tilted stacks of HTS tapes at temperatures above 20K - Łukasz Tomków (University of Cambridge)   ()
10:00 AM Hydraulic characterization of conductor prototypes for fusion magnets - Monika Lewandowska (West Pomeranian University of Technology, Szczecin)   ()
10:30 AM --- Coffee break ---
10:50 AM
Session I - Arend Nijhuis (University of Twente) (until 11:50 AM) ()
10:50 AM Strand-Jacket Thermal Contact Resistance of REBCO Conductor Measured on Dummy Conductors - Rui Kang   ()
11:20 AM Steady-state transverse heat transfer in a single channel CICC - Aleksandra Dembkowska (West Pomeranian University of Technology, Szczecin)   ()
11:50 AM
Session II - Alfredo Portone (Fusion For Energy/European Commission) (until 12:50 PM) ()
11:50 AM On the Mechanical Behavior of a Nb3Sn Superconducting Coil During a Quench: Three-Dimensional Finite Element Analysis of a Quench Heater Protected Quench - Jose Ferradas Troitino (Universite de Geneve (CH))   ()
12:20 PM LTS magnets electro-mechanical modelling taking into account magnetic iron forces - Douglas Martins Araujo (CERN)   ()
9:00 AM
Session IV - Bertrand Baudouy (CEA Paris-Saclay) (until 10:30 AM) ()
9:00 AM Adaptation of the nuclear safety code CATHARE3 to supercritical helium flow. - Sulayman Shoala (CEA/DRF)   ()
9:30 AM Simulation of a cryogenic capillary tube: thermodynamic behavior subjected to heat load. - Maria Barba (CEA (Commissariat à l'Énergie Atomique))   ()
10:00 AM An update of dynamic thermal-hydraulic simulations of the JT-60SA Cryogenic system for preparing plasma operation - François BONNE (CEA)   ()
10:30 AM --- Coffee break ---
10:50 AM
Session IV - Bertrand Baudouy (CEA Paris-Saclay) (until 11:20 AM) ()
10:50 AM Parametric study and optimization of the cryo-magnetic system for EU DEMO at the pre-conceptual design phase - Christine Hoa (CEA,IRIG)   ()
11:20 AM
Session V - Dariusz Bocian (Institute of Nuclear Physics Polish Academy of Sciences (Kraków, PL)) Monika Lewandowska (West Pomeranian University of Technology, Szczecin) (until 12:50 PM) ()
11:20 AM Thermal analysis of AC loss heated Nb3Sn coil samples for the High Luminosity upgrade of the LHC. - Kirtana Puthran (CERN)   ()
11:50 AM Electro-thermal 1D model of the SIS100 superconducting dipole magnet. - Piotr Szwangruber (GSI Helmholtzzentrum für Schwerionenforschung GmbH)   ()
12:20 PM PSpice modeling of the inrush and fault currents in a 21 MVA HTS transformer. - Pawel Surdacki (Lublin University of Technology)   ()
8:55 AM
Session VI - Sylvie NICOLLET (CEA) (until 10:00 AM) ()
8:55 AM Fundamental description of Field Induced Josephson junctions and devices built on their base. - Krzysztof Pomorski (University College Dublin)   ()
9:25 AM FEM Modeling Of Multilayer Canted Cosine Theta (CCT) Magnets. - Rafal Ortwein / Przemyslaw Wachal   ()
10:00 AM
Session VII - Marco Breschi (University of Bologna) (until 10:30 AM) ()
10:00 AM Analysis of quench in HTS conductors for fusion applications: a novel 1D thermal-hydraulic modeling approach. - Andrea Zappatore (Politecnico di Torino)   ()
10:30 AM --- Coffee break ---
10:50 AM
Session VII - Reinhard Heller (Karlsruhe Institute of Technology) (until 12:20 PM) ()
10:50 AM Study on conditions for successful quench protections of coils wound with coated conductors by short-sample experiments and quench simulations. - Naoyuki Amemiya (Kyoto University)   ()
11:20 AM Modelling of a 50 kA REBCO Conductor with Multi-strand Made by Twisted Stacked Tapes. - Rui Kang   ()
11:50 AM Design and analysis of HTS subsize-conductors for quench investigations towards future HTS fusion magnets. - Michael Wolf (Karlsruhe Institute of Technology (KIT))   ()
7:45 AM --- Wendelstein 7-X tour ---
PM
12:50 PM --- Lunch break ---
2:10 PM
Session II - Alfredo Portone (Fusion For Energy/European Commission) (until 2:40 PM) ()
2:10 PM Electro-Mechanical FE modeling of CORC® cable configurations based on bending experiments. - Arend Nijhuis (University of Twente)   ()
2:40 PM
Session III - Sylvie NICOLLET (CEA) (until 3:40 PM) ()
2:40 PM A-formulation method for full 3D FEM computation of the superconducting magnetization. - Mykola Soloviov (Institute of Electrical Engineering Slovak Academy of Sciences )   ()
3:10 PM Field Quality Analysis in the HTS Dipole Insert-Magnet Feather M2 with the Finite Element Method. - Lorenzo Bortot (CERN)   ()
3:40 PM --- Coffee break ---
6:00 PM --- Guided city walk ---
12:50 PM --- Lunch break ---
2:10 PM
Session V - Monika Lewandowska (West Pomeranian University of Technology, Szczecin) Dariusz Bocian (Institute of Nuclear Physics Polish Academy of Sciences (Kraków, PL)) (until 3:10 PM) ()
2:10 PM 1D and 2D finite-element approaches to extract the resistivity of the superconductor material from pulsed current measurements on HTS commercial tapes. - Nicolo' Riva (EPFL - EPF Lausanne)   ()
2:40 PM Analysis of Current Distirbution during Quench in a Pancake coil wound with REBCO Roebel cable. - Marco Breschi (University of Bologna)   ()
3:10 PM
Session VI - Sylvie NICOLLET (CEA) (until 3:40 PM) ()
3:10 PM User Defined Elements in ANSYS for Multiphysics Modeling of Superconducting Magnets. - Lucas Brouwer (Lawrence Berkeley National Laboratory)   ()
3:40 PM --- Coffee break ---
4:00 PM
Session VI - Sylvie NICOLLET (CEA) (until 5:00 PM) ()
4:00 PM OLYMPE, a multi-physic platform for fusion magnet design. - Quentin Le Coz (CEA)   ()
4:30 PM Empowering the 4C code for the thermal-hydraulic analysis of coils for the design of future SC tokamaks: a novel, fully-3D model of the TF coil structures. - Roberto Bonifetto (Politecnico di Torino)   ()
7:00 PM --- Social dinner ---
12:20 PM
Session VIII (until 12:50 PM) ()
12:20 PM Quench Thermohydraulic Analysis of Tore Supra/WEST TF Coil and Smooth Quench Occurrence in Tokamak. - Sylvie NICOLLET (CEA)   ()
12:50 PM --- Lunch break ---
2:10 PM
Session VIII - Naoyuki Amemiya (Kyoto University) (until 3:40 PM) ()
2:10 PM Numerical Investigation of Quench Event in the Innermost Pair of the KSTAR Central Solenoids. - Dong Keun Oh   ()
2:40 PM Quench Protection Design of the HL-LHC Hollow Electron Lens System. - Michal Maciejewski (Technical University of Lodz(PL))   ()
3:10 PM Towards to Quench Limit Determination of Superconducting Magnet with use of Thermal-Electrical Analogy - Dariusz Bocian (Institute of Nuclear Physics Polish Academy of Sciences (Kraków, PL))   ()
3:40 PM --- Coffee break ---
4:00 PM
Wrap-up session (until 5:00 PM) ()
4:00 PM Workshop wrap-up   ()