Unit 13 - Protection systems

→ Europe/Zurich
VIDYO (CERN)

VIDYO

CERN

Ezio Todesco (CERN)
Description

In this Unit we will describe the main features of the protection systems. We will start discussing the quench detection via the measurement of the resistive voltage in the coil. The equations giving the resistance and voltage increase are discussed, and the strategy for removing inductance voltages during ramp are outlined. The Nb3Sn detection is more complex due to the presence of flux jumps at low fields, that require the definition of special larger thresholds at low currents.

Energy extraction methods can be improved by variable resistors: this technique will be shortly outlined. We will then describe the technology of quench heaters, based on strips in close contact to the coil, but electrically insulated from the coil, that are heated by a pulse of current when the quench is detected. We will discuss the main parameters and the design of the heating strips, including the need of heating stations for long magnets.

The efficiency of the quench heater is given by the quench delay between heater firing and induced quench. This is mainly related to the magnet margin, and to the heater design. Standard quench heaters are placed on the outer surface of the coil. We will also discuss two attempts done in the past 10 years, namely quench heaters on the inner surface of the coil, and quench heaters between the two coil layers.

In the past 10 years a new concept has been developed, based injecting a pulse of current directly in the coil, and relying on the heating induced by the field variation (CLIQ). This technology has been adopted for the interaction region magnets of the high luminosity LHC. We will outline the main parameters of the system and the experimental validation.

Registration
Participants
The agenda of this meeting is empty