LHC Crab Cavity Engineering Meeting

Session

Cryostat Design I, Helium Vessel & Tuners

13 Dec 2012, 10:45

Hermitage Room, Industrial Center Building, 2 East (FNAL)

Conveners

Cryostat Design I, Helium Vessel & Tuners

• Alireza Nassiri (Argonne National Laboratory - DOE)

17. General Specifications

Ofelia Capatina (CERN)

13/12/2012, 10:45

General regulations applicable to the pressure equipment (Cavity, Helium vessel & Cryostat) both for SM18 RF tests and SPS beam tests will be reviewed. Based on the European directives, general specifications pertaining to the LHC crab cavities are outlined. Aspects of safety, material for different elements and properties are discussed to comply with the CERN infrastructure and regulations.

0. Helium Vessel/Tuner, ODU-SLAC RF Dipole

Jean Delayen (Old Dominion University)

13/12/2012, 11:05

Detailed design of the ODU-SLAC RF dipole Helium vessel and magnetic shielding conforming to the specifications of both pressure vessel code, tuning and magnetic shielding to stay within the specified limits should be outlined. The tuning mechanism for the cavity should be presented with mechanical simulations conforming to the static and dynamic tuning requirements along with its interface to...

1. Helium Vessel/Tuner, BNL Quarter Wave

Binping Xiao (BNL)

13/12/2012, 11:25

Detailed design of the BNL quarter wave Helium vessel and magnetic shielding conforming to the specifications of both pressure vessel code, tuning and magnetic shielding to stay within the specified limits should be outlined. The tuning mechanism for the cavity should be presented with mechanical simulations conforming to the static and dynamic tuning requirements along with its interface to...

6. Helium Vessel/Tuner, UK 4Rod Cavity

Tom Jones (STFC)

13/12/2012, 11:45

Detailed design of the UK 4rod cavity Helium vessel and magnetic shielding conforming to the specifications of both pressure vessel code, tuning and magnetic shielding to stay within the specified limits should be outlined. The tuning mechanism for the cavity should be presented with mechanical simulations conforming to the static and dynamic tuning requirements along with its interface to the...

38. Discussion

13/12/2012, 12:05