Description
Tutorials to be offered:
- Introduction to KiCAD PCB design software
- The Corryvreckan Test-Beam Reconstruction Framework --- Hands-on
- Silicon Detector Monte Carlo Simulations with Allpix Squared
- Constellation Hands-on: Control and DAQ Framework for Test Beams and Beyond
-
Stephan Lachnit (Deutsches Elektronen-Synchrotron (DE))14/04/2026, 13:30Tutorial
Constellation is a control and data acquisition framework for small-scale experiments like test beams or lab characterizations. It provides the necessary functionality for such environments like synchronous operation of several devices, unified configuration interface, logging, telemetry, data transmission and error handling. So-called satellites form the basis of Constellation, which are...
Go to contribution page -
Dr Peter-Bernd Otte14/04/2026, 13:30Tutorial
This lecture (20 Min) and hands-on workshop (60 Min) introduce the fundamentals of printed circuit board (PCB) design using KiCad, with a focus on slow-control applications in laboratory environments. KiCad, an open-source electronic design automation (EDA) tool is widely used by physicists and research institutions worldwide.
Participants are guided through the complete workflow from...
Go to contribution page -
Judith Schlaadt, Simon Spannagel (Deutsches Elektronen-Synchrotron (DE)), Stephan Lachnit (Deutsches Elektronen-Synchrotron (DE))15/04/2026, 13:30
Constellation is a control and data acquisition framework for small-scale experiments like test beams or lab characterizations. It provides the necessary functionality for such environments like synchronous operation of several devices, unified configuration interface, logging, telemetry, data transmission and error handling. So-called satellites form the basis of Constellation, which are...
Go to contribution page -
Håkan Wennlöf (Nikhef National institute for subatomic physics (NL)), Isis Hobus15/04/2026, 13:30Tutorial
This interactive workshop will introduce participants to the fundamental functionalities of the Allpix Squared simulation framework, guiding them through key steps in sensor simulation and data analysis. Attendees will learn how to configure simulations, define detector geometries, and extract relevant quantities through histograms. Additionally, the participants will be able to learn how to...
Go to contribution page -
Finn King (Deutsches Elektronen-Synchrotron (DE)), Naomi Davis (ATLAS)15/04/2026, 16:00Tutorial
Corryvreckan is a software framework dedicated to the analysis of test-beam data. It employs a modular concept, providing algorithms for typical analysis steps like pixel masking, clustering, tracking, alignment and for the reconstruction of commonly investigated observables like hit detection efficiency, spatial and temporal resolution, or material budget. This approach allows for a flexible...
Go to contribution page -
Peter-Bernd Otte15/04/2026, 16:00
This lecture (20 Min) and hands-on workshop (60 Min) introduce the fundamentals of printed circuit board (PCB) design using KiCad, with a focus on slow-control applications in laboratory environments. KiCad, an open-source electronic design automation (EDA) tool is widely used by physicists and research institutions worldwide.
Participants are guided through the complete workflow from...
Go to contribution page