Login

ICMC-2013, the International Cryogenics Materials Conference

17–21 Jun 2013
America/Anchorage timezone

Contribution List

81 out of 81 displayed
Export to PDF
  1. 26. Analyses of heterogeneous deformation and subsurface fatigue crack generation in alpha titanium alloy at low temperature
    O. Umezawa, et al. (Yokohama National University)
    18/06/2013, 09:00
  2. 4. Cryogenic Properties of Alumina Strengthened Copper for High Field Magnets
    V.J. Toplosky, et al (NHMFL)
    18/06/2013, 09:00
  3. 20. Effect of microstructure on high-cycle fatigue properties of Ti-6Al-4V alloy forging at cryogenic temperature
    T. YURI, et al. (National Institute for Materials Science)
    18/06/2013, 09:00
  4. 33. Enhancement in thermoelectric power factor of Bi85Sb15-xPbx alloys at low-temperatures
    C. Song (Zunyi Normal College)
    18/06/2013, 09:00
  5. 19. Fatigue and Fracture Properties of a Super-Austenitic Stainless Steel at 295 K and 4 K
    D.M. McRae, et al. (NHMFL/FSU)
    18/06/2013, 09:00
  6. 23. Fundamental Study of Irradiation Effect on Organic Insulation Material for Superconducting Fusion Magnet
    Y. Nakata, et al. (Osaka University)
    18/06/2013, 09:00
  7. 30. Physical properties of Al2O3/ZrO2 at low temperature
    Y. Han, et al. (Techincal Institute of Physics and Chemistry)
    18/06/2013, 09:00
  8. 2. Review of specimen heating in mechanical tests at cryogenic temperatures {nc}
    T. Ogata (NIMS)
    18/06/2013, 09:00
  9. 10. Strain and magnetic field responses of critical current in externally reinforced GdBCO coated conductor tapes at 77 K
    H. Shin, et al. (Andong National University)
    18/06/2013, 09:00
  10. 36. Critical current anisotropy in clean superconducting pnictide thin films
    J. Haenisch, et al. (IFW Dresden)
    18/06/2013, 10:30
  11. 37. Pathways to improved grain connectivity and high transport critical current density in untextured K-doped ferropnictide BaFe2As2 bulks and wires
    J.D. Weiss, et al. (Florida State University)
    18/06/2013, 10:45
  12. 13. Epoxy Impregnation as Mechanical Stabilization of Roebel-Assembled-Coated-Conductor Cables
    C. Barth, et al. (KIT)
    18/06/2013, 11:00
  13. 38. Isotropic high critical current density in FeSeTe thin film on non oxide substrate.
    C. Ferdeghini, et al. (CNR-SPIN)
    18/06/2013, 11:00
  14. 14. Fabrication and Observations of an ITER CS Module Cross-Section
    D. Reed, et al. (Cryogenic Materials, Inc.)
    18/06/2013, 11:15
  15. 15. Large-scale shear tests of 3x1 arrays of insulated conduit for the ITER Central Solenoid
    R.P. Walsh, et al. (NHMFL/FSU)
    18/06/2013, 11:30
  16. 40. Remarkable influence of heat treatment in structural, electrical and magnetic properties in (Y1-xNdx)SrBaCu3O6+z
    A. Nafidi, et al. (Laboratory of Condensed Matter Physics and Nanomaterials for Renewable Energy, University Ibn Zohr)
    18/06/2013, 11:30
  17. 16. Evaluation of Interlaminar Shear Strength of GFRP Composed of Bonded Glass/Polyimide Tapes and Cyanate-Ester/Epoxy Blended Resins for ITER TF Coils
    T. Hemmi, et al. (JAEA)
    18/06/2013, 11:45
  18. 131. Manifestation of an acceptor resonant state in transport and bands structure in a far-infrared detector HgTe/CdTe superlattice
    A. Nafidi, et al. (Laboratory of Condensed Matter Physics and Nanomaterials for Renewable Energy, University Ibn Zohr)
    18/06/2013, 11:45
  19. 48. [Invited] Analysis of temperature and current margin of four ITER Central Solenoid conductor designs during a 15 MA plasma scenario with comparison to DC qualification tests
    A. Nijhuis, et al. (University of Twente)
    18/06/2013, 13:30
  20. 41. [Invited] Estimation of uncertainty for Fatigue crack growth rate at cryogenic temperatures
    A. Nyilas (CEME, Cryo. Eng. & Mat. Exp.)
    18/06/2013, 13:30
  21. 49. 3-D Homogeneization: a new technique for fast calculation of AC losses in non-circular HTS pancake coils
    V. Zermeno, et al. (Karlsruhe Institute of Technology)
    18/06/2013, 14:00
  22. 43. Welded tie plate feasibility study for ITER Central Solenoid structure
    R.P. Walsh, et al. (NHMFL/FSU)
    18/06/2013, 14:15
  23. 51. AC losses in CORC cables measured at 77 K in liquid nitrogen bath
    M. Majoros, et al. (The Ohio State University)
    18/06/2013, 14:30
  24. 44. Effect of stress ratio on high-cycle fatigue properties of Ti-6Al-4V ELI alloy forging at low temperature
    Y. Ono, et al. (National Institute for Materials Science)
    18/06/2013, 14:30
  25. 52. Magnetic Shielding Measurements on 2G HTS Rings
    J. Kvitkovic, et al. (Florida State University)
    18/06/2013, 14:45
  26. 45. Stress-induced martensitic transformation during tensile test of full-size TF conductor jacket tube at 4.2 K
    H.H. Yang, et al. (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
    18/06/2013, 14:45
  27. 46. Cryogenic Mechanical Properties of Fusion-Welded Nitronic 50 Austenitic Stainless Steel
    E.N. Dalder, et al. (Dalder Materials Consulting, inc.)
    18/06/2013, 15:00
  28. 53. Minimum Quench Energy of High Temperature Superconducting Composites and Magnets
    Y. Yang (University of Southampton)
    18/06/2013, 15:00
  29. 1. ICMC Awards
    19/06/2013, 08:00
  30. 0. Selection and Properties of Structural Materials for Cryogenic Applications
    Stefano Sgobba (CERN)
    19/06/2013, 08:15
  31. 62. ARPES-parameterized Hubbard approach to d-wave cuprate superconductors
    L.A. Perez, et al. (UNIVERSIDAD NACIONAL AUTONOMA DE MEXICO)
    19/06/2013, 09:00
  32. 98. Nb3Sn cables behavior during heat treatment
    M. Durante, et al. (CEA Saclay)
    19/06/2013, 09:00
  33. 74. Recent Progress and Tests of Radiation Resistant Impregnation Materials for Nb3Sn Coils
    R. Bossert, et al. (Fermi National Accelerator Laboratory)
    19/06/2013, 09:00
  34. 133. Rheological behavior and cryogenic properties of cyanate ester/epoxy insulation material for fusion superconducting magnet
    Z.X. Wu, et al. (Techn. Inst. of Physics and Chemistry, Chinese Academy of Sciences)
    19/06/2013, 09:00
  35. 73. Tests of by-pass diodes at cryogenic temperatures for the KATRIN magnets
    W. Gil, et al. (Karlsruhe Institute of Technology)
    19/06/2013, 09:00
  36. 55. Thermal conductivity measurements of some HTS tapes for current lead
    H. Liu, et al. (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS; Graduate Univ. of CAS)
    19/06/2013, 09:00
  37. 84. Increasing critical current density in Bi-2212 round wires by overpressure processing
    E. Hellstrom, et al. (ASC - NHMFL/FSU)
    19/06/2013, 10:30
  38. 78. New processing methods for niobium SRF resonators for maximization of quality factor for CW applications.
    A. Grassellino, et al. (Fermilab)
    19/06/2013, 10:30
  39. 79. Mechanical properties of niobium tube with tube bulge test for superconducting RF cavities
    H.S. Kim, et al. (The Ohio State University)
    19/06/2013, 10:45
  40. 85. The fabrication of Bi,Pb-2223 thin films from multi-layered precursor films
    A. Matsumoto, et al. (National Institute for Materials Science)
    19/06/2013, 10:45
  41. 80. "Fabrication of fine-grain seamless Nb tube for SRF cavities"
    S. Balachandran, et al. (Texas A&M University)
    19/06/2013, 11:00
  42. 86. Distributed torsional strain measurement using embedded Fiber Bragg Gratings array in a 2 nd generation high temperature superconductor tapes.
    R. Ramalingam, et al. (Karlsruhe Institute for Technology)
    19/06/2013, 11:00
  43. 81. Surface morphologies and topographies of welded areas and HAZ of untreated and treated niobium electropolished samples studied by optical microscopy and profilometry for SRF applications
    M. Sumption, et al. (The Ohio State University)
    19/06/2013, 11:15
  44. 82. "Single-pass" superconducting radio-frequnecy cavities
    L.D. Cooley (Fermilab)
    19/06/2013, 11:30
  45. 87. Spatial homogeneity of critical currents in long RE-123 coated conductors
    T. Kiss, et al. (Kyushu University)
    19/06/2013, 11:30
  46. 83. Improved understanding of the role of strained structure in degradation of surface superconductivity of superconducting RF (radio frequency) quality niobium
    Z. Sung, et al. (National High Magnetic Field Laboratory)
    19/06/2013, 11:45
  47. 88. Mechanical Properties of IBAD-MOCVD-based 2G HTS wire Fabricated on Hastelloy® Substrate
    Y. Zhang, et al. (SuperPower Inc.)
    19/06/2013, 11:45
  48. 94. [Invited] Comparisons of the grain boundary chemistry of Ta and Ti doped high Jc Nb3Sn strand by atomic resolution microscopy
    Z. Sung, et al. (National High Magnetic Field Laboratory)
    19/06/2013, 13:30
  49. 89. Irradiation imposed degradation of the mechanical and electrical properties of electrical insulation for future accelerator magnets
    J. Polinski, et al. (Wroclaw University of Technology)
    19/06/2013, 13:30
  50. 90. Some test results of new test facilities installed in radiation control area for investigation on neutron irradiation effect on superconducting properties
    A. Nishimura, et al. (ITER Organization)
    19/06/2013, 13:45
  51. 91. Measurement of the Mechanical Properties of Thin Film Polymers at Cryogenic Temperatures
    W. Johnson, et al. (NASA Kennedy Space Center)
    19/06/2013, 14:00
  52. 92. Characterization of Insulating Coatings for Wind-and-React Coil Fabrication
    D.W. Cheng, et al. (Lawrence Berkeley National Laboratory)
    19/06/2013, 14:15
  53. 96. Development of Tube Type Nb3Sn Conductor and its Application
    X. Peng, et al. (Hyper Tech Research Inc.)
    19/06/2013, 14:15
  54. 97. Correlation of A15 microstructure and transport in Nb3Sn tube type and Rod-in-Tube (RIT) strands: the influence of heat treatments, Cu/Sn ratio, and filament size
    M. Sumption (The Ohio State University)
    19/06/2013, 14:30
  55. 99. "Fabrication of Fine Grain Ta Diffusion Barrier Tube for Nb3Sn Conductors"
    K.T. Hartwig, et al. (Texas A&M University)
    19/06/2013, 14:45
  56. 108. [Invited] High-temperature superconducting Conductor on Round Core magnet cables operated at high current ramp rates in background fields of up to 19 T
    D. Van der Laan, et al. (Advanced Conductor Technologies and University of Colorado)
    20/06/2013, 10:30
  57. 100. The ITER Pre-Compression Rings - A First in Cryogenic Composite Technology
    H. Rajainmaki, et al. (Fusion for Energy)
    20/06/2013, 10:30
  58. 101. Multi-scale analysis and characterisation of the ITER PRE-COMPRESSION RINGS
    A. Foussat, et al. (ITER Organisation)
    20/06/2013, 10:45
  59. 109. Design, Fabrication and Testing of Terminations for Helium Gas Cooled Superconducting DC Cable
    D. Crook, et al. (The Florida State University)
    20/06/2013, 11:00
  60. 102. Low-Temperature Mechanical Properties of Glass/Epoxy Laminates
    D. Reed, et al. (Cryogenic Materials, Inc.)
    20/06/2013, 11:00
  61. 110. Design of high current superconducting DC power cable using the longitudinal magnetic field configuration
    T. Matsushita, et al. (Kyushu Institute of Technology)
    20/06/2013, 11:15
  62. 103. Essential Design, Construction and Test Elements of ITER Axial Insulating Breaks
    F. Rodriguez Mateos, et al. (Advanced Cryogenic Materials)
    20/06/2013, 11:15
  63. 111. Design of high current density, oxide - metal composite superconductors with superior stability, stress and strain tolerance for very high field applications
    A. Otto, et al. (Solid Material Solutions)
    20/06/2013, 11:30
  64. 112. Critical current density in REBCO coated conductors in longitudinal magnetic field
    T. Matsushita, et al. (Kyushu Institute of Technology)
    20/06/2013, 11:45
  65. 105. Mechanical behaviors of hyberbranched epoxy resin toughened bisphenol F epoxy resin for cryogenic applications
    J. Li, et al. (Key Laboratory of Cryogenics,Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
    20/06/2013, 11:45
  66. 113. Extraction of local Jc(B,θ) dependence from measured Ic(H,θ) characteristics and its use for evaluating self-field effects in REBCO coated conductor devices
    F. Grilli, et al. (Karlsruhe Institute of Technology)
    20/06/2013, 12:00
  67. 114. Effect of thermo-mechanical processing on the material properties at low temperature of a large size Al-Ni stabilized Nb-Ti/Cu superconducting cable
    S. Langeslag, et al. (CERN & University of Twente)
    20/06/2013, 12:15
  68. 115. [Invited] Critical Current Density of Multifilamentary High Performance MgB2 Wires
    M. Sumption, et al. (The Ohio State University)
    20/06/2013, 13:30
  69. 122. Nature of pinning mechanism in Al and C co-doped MgB2 superconductors
    M. Shahabuddin, et al. (King Saud University)
    20/06/2013, 13:30
  70. 123. Pinning centers in bulk MgB2 with enhanced grain connectivity
    T. Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)
    20/06/2013, 13:45
  71. 116. Improvement of critical current properties in internal Mg diffusion processed MgB2 wires
    H. Kumakura, et al. (National Institute for Materials Science)
    20/06/2013, 14:00
  72. 124. ZrB2, TiB2, B4C and C Doping in MgB2 Thin Films
    M.A. Susner, et al. (The Ohio State University)
    20/06/2013, 14:00
  73. 117. Enhancement of Critical Currents wires of MgB2 using different sheath materials
    C. Sobrero, et al. (ANPCyT - CNEA)
    20/06/2013, 14:15
  74. 118. Enhanced superconducting properties of MgB2 multifilamentary wires and tapes
    Y. Ma, et al. (Institute of Electrical Engineering, Chinese Academy of Sciences)
    20/06/2013, 14:30
  75. 119. Development of MgB2 superconductor wire and coils for practical applications at Hyper Tech Research
    D. Doll, et al. (Hyper Tech Research, Inc.)
    20/06/2013, 14:45
  76. 5. Flux Pinning Engineering for Applications of High-Tc Superconductors
    Kaname Matsumoto (Kyushu Institute of Technology, Japan)
    21/06/2013, 11:30
  77. 63. An Investigation into the Doped Paratacamite Group of Minerals as Potential Supercon-ducting Materials {nc}
    T. Bullard, et al. (UES Inc.)
  78. 132. Announcement for ICMC Presenters for submission of Orals and Posters for ON-LINE presentation
    Herman Ten Kate (CERN), Robert Walsh (Florida State University)
  79. 128. Effect of cryogenic treatment on the wear behavior of brass
    S. Wang, et al. (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
  80. 130. Magnetic properties measurement and discussion of an amorphous power transformer core at room and liquid nitrogen temperature
    A.G. Pronto, et al. (CTS-Centro de Tecnologia e Sistemas)
  81. 107. PERFORMANCE AND DESIGN OF A ROTATING CRYOGENIC POLYMER SEAL FOR A VARIABLE AREA NOZZLE
    U. Naranjo, et al. (Washington State University)