ICMC-2013, the International Cryogenics Materials Conference
→
America/Anchorage
Herman ten Kate (E-Publication)(CERN), Robert Walsh (Program Chair)(Florida State University), Wilfried Goldacker (Conference Chair)(KIT)
Description
This site presents the Scientific Program and Timetable of the ICMC section of the CEC/ICMC-2013 conference.
The timetable provides PDF copies of the Oral and Poster presentations (when submitted), essentially all materials related and ICMC labeled contributions to the conference.
Enhancement in thermoelectric power factor of Bi85Sb15-xPbx alloys at low-temperatures
Speaker:
C. Song(Zunyi Normal College)
Slides
9
Physical properties of Al2O3/ZrO2 at low temperature
Speaker:
Y. Han, et al.(Techincal Institute of Physics and Chemistry)
Slides
Insulating Materials at Cryogenic Temperature: 1MOrC1 oralsKahtnu 1
Kahtnu 1
Conveners:
Charles Swenson(LBL), Klaus-Peter Weiss(KIT)
10
Epoxy Impregnation as Mechanical Stabilization of Roebel-Assembled-Coated-Conductor Cables
Speaker:
C. Barth, et al.(KIT)
Slides
11
Fabrication and Observations of an ITER CS Module Cross-Section
Speaker:
D. Reed, et al.(Cryogenic Materials, Inc.)
Slides
12
Large-scale shear tests of 3x1 arrays of insulated conduit for the ITER Central Solenoid
Speaker:
R.P. Walsh, et al.(NHMFL/FSU)
Slides
13
Evaluation of Interlaminar Shear Strength of GFRP Composed of Bonded Glass/Polyimide Tapes and Cyanate-Ester/Epoxy Blended Resins for ITER TF Coils
Speaker:
T. Hemmi, et al.(JAEA)
Slides
Pnictides and Bulk REBCO: 1MOrC2 oralsKahtnu 2
Kahtnu 2
Convener:
Eric Hellstrom(NHMFL)
14
Critical current anisotropy in clean superconducting pnictide thin films
Speaker:
J. Haenisch, et al.(IFW Dresden)
Slides
15
Pathways to improved grain connectivity and high transport critical current density in untextured K-doped ferropnictide BaFe2As2 bulks and wires
Speaker:
J.D. Weiss, et al.(Florida State University)
Slides
16
Isotropic high critical current density in FeSeTe thin film on non oxide substrate.
Speaker:
C. Ferdeghini, et al.(CNR-SPIN)
Slides
17
Remarkable influence of heat treatment in structural, electrical and magnetic properties in (Y1-xNdx)SrBaCu3O6+z
Speaker:
A. Nafidi, et al.(Laboratory of Condensed Matter Physics and Nanomaterials for Renewable Energy, University Ibn Zohr)
Slides
18
Manifestation of an acceptor resonant state in transport and bands structure in a far-infrared detector HgTe/CdTe superlattice
Speaker:
A. Nafidi, et al.(Laboratory of Condensed Matter Physics and Nanomaterials for Renewable Energy, University Ibn Zohr)
Slides
12:30
Lunch
Superconductor Stability and AC Loss: 1MOrD2 oralsKathnu 2
Kathnu 2
Conveners:
Arend Nijhuis(University of Twente), Wilfried Goldacker(KIT)
19
[Invited] Analysis of temperature and current margin of four ITER Central Solenoid conductor designs during a 15 MA plasma scenario with comparison to DC qualification tests
Speaker:
A. Nijhuis, et al.(University of Twente)
Slides
20
3-D Homogeneization: a new technique for fast calculation of AC losses in non-circular HTS pancake coils
Speaker:
V. Zermeno, et al.(Karlsruhe Institute of Technology)
Slides
21
AC losses in CORC cables measured at 77 K in liquid nitrogen bath
Speaker:
M. Majoros, et al.(The Ohio State University)
Slides
22
Magnetic Shielding Measurements on 2G HTS Rings
Speaker:
J. Kvitkovic, et al.(Florida State University)
Slides
23
Minimum Quench Energy of High Temperature Superconducting Composites and Magnets
Speaker:
Y. Yang(University of Southampton)
Slides
Mechanical Properties of Structural Materials: 1MOrD1 oralsKahtnu 1
Kahtnu 1
Conveners:
Robert Walsh(NHMFL), Toshio Ogata(NIMS)
24
[Invited] Estimation of uncertainty for Fatigue crack growth rate at cryogenic temperatures
Speaker:
A. Nyilas(CEME, Cryo. Eng. & Mat. Exp.)
Slides
25
Welded tie plate feasibility study for ITER Central Solenoid structure
Speaker:
R.P. Walsh, et al.(NHMFL/FSU)
Slides
26
Effect of stress ratio on high-cycle fatigue properties of Ti-6Al-4V ELI alloy forging at low temperature
Speaker:
Y. Ono, et al.(National Institute for Materials Science)
Slides
27
Stress-induced martensitic transformation during tensile test of full-size TF conductor jacket tube at 4.2 K
Speaker:
H.H. Yang, et al.(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
Slides
28
Cryogenic Mechanical Properties of Fusion-Welded Nitronic 50 Austenitic Stainless Steel
Speaker:
E.N. Dalder, et al.(Dalder Materials Consulting, inc.)
Conveners:
David A. Cardwell(University of Cambridge), Herbert Freyhardt(ZFW GmBH)
29
ICMC AwardsTikahtnu Ballroom
Tikahtnu Ballroom
Slides
30
Selection and Properties of Structural Materials for Cryogenic ApplicationsTikahtnu Ballroom B
Tikahtnu Ballroom B
Speaker:
Stefano Sgobba(CERN)
Slides
09:00
CoffeeIdlughet Exhibit Hall
Idlughet Exhibit Hall
LTS, HTS, and Novel Superconductors - AC Loss, Stability and Properties I: 2MPoB7 postersIdlughet Exhibit Hall
Idlughet Exhibit Hall
Conveners:
Kenichi Sato(Sumitomo Electric Industries LtD), Wilfried Goldacker(KIT)
31
ARPES-parameterized Hubbard approach to d-wave cuprate superconductors
Speaker:
L.A. Perez, et al.(UNIVERSIDAD NACIONAL AUTONOMA DE MEXICO)
Slides
32
Thermal conductivity measurements of some HTS tapes for current lead
Speaker:
H. Liu, et al.(Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS; Graduate Univ. of CAS)
Slides
LTS, HTS, and Novel Superconductors - AC Loss, Stability and Properties II: 2MPoB8 postersIdlughet Exhibition Hall
Idlughet Exhibition Hall
Conveners:
Herbert Freyhardt(ZWF GmBH), Mike Sumption(The Ohio State University)
33
Nb3Sn cables behavior during heat treatment
Speaker:
M. Durante, et al.(CEA Saclay)
Slides
LTS, HTS, and Novel Superconductors - AC Loss, Stability and Properties III: 2MPoB9 postersIdlughet Exhibit Hall
Idlughet Exhibit Hall
Conveners:
David A. Cardwell(University of Cambridge), Hu-Zawn Sung
34
Recent Progress and Tests of Radiation Resistant Impregnation Materials for Nb3Sn Coils
Speaker:
R. Bossert, et al.(Fermi National Accelerator Laboratory)
Slides
35
Rheological behavior and cryogenic properties of cyanate ester/epoxy insulation material for fusion superconducting magnet
Speaker:
Z.X. Wu, et al.(Techn. Inst. of Physics and Chemistry, Chinese Academy of Sciences)
Slides
36
Tests of by-pass diodes at cryogenic temperatures for the KATRIN magnets
Speaker:
W. Gil, et al.(Karlsruhe Institute of Technology)
Slides
HTS Conductors: 2MOrC2 oralsKahtnu 2
Kahtnu 2
Conveners:
Kenichi Sato(Sumitomo Electric Industries, Ltd.), Takonobu Kiss(Kyushu University)
37
Increasing critical current density in Bi-2212 round wires by overpressure processing
Speaker:
E. Hellstrom, et al.(ASC - NHMFL/FSU)
Slides
38
The fabrication of Bi,Pb-2223 thin films from multi-layered precursor films
Speaker:
A. Matsumoto, et al.(National Institute for Materials Science)
Slides
39
Distributed torsional strain measurement using embedded Fiber Bragg Gratings array in a 2 nd generation high temperature superconductor tapes.
Speaker:
R. Ramalingam, et al.(Karlsruhe Institute for Technology)
Slides
40
Spatial homogeneity of critical currents in long RE-123 coated conductors
Speaker:
T. Kiss, et al.(Kyushu University)
Slides
41
Mechanical Properties of IBAD-MOCVD-based 2G HTS wire Fabricated on Hastelloy® Substrate
Speaker:
Y. Zhang, et al.(SuperPower Inc.)
Slides
SRF Materials: 2MOrC1 oralsKahtnu 1
Kahtnu 1
Conveners:
Ted Hartwig(Texas A&M), Tommy Peterson(Fermilab)
42
New processing methods for niobium SRF resonators for maximization of quality factor for CW applications.
Speaker:
A. Grassellino, et al.(Fermilab)
Slides
43
Mechanical properties of niobium tube with tube bulge test for superconducting RF cavities
Speaker:
H.S. Kim, et al.(The Ohio State University)
Slides
44
"Fabrication of fine-grain seamless Nb tube for SRF cavities"
Speaker:
S. Balachandran, et al.(Texas A&M University)
Slides
45
Surface morphologies and topographies of welded areas and HAZ of untreated and treated niobium electropolished samples studied by optical microscopy and profilometry for SRF applications
Speaker:
M. Sumption, et al.(The Ohio State University)
Improved understanding of the role of strained structure in degradation of surface superconductivity of superconducting RF (radio frequency) quality niobium
Speaker:
Z. Sung, et al.(National High Magnetic Field Laboratory)
Slides
12:30
Lunch
LTS Conductors: 2MOrD2 oralsKahtnu 2
Kahtnu 2
Convener:
Xuan Peng(Hyper Tech Research Inc)
48
[Invited] Comparisons of the grain boundary chemistry of Ta and Ti doped high Jc Nb3Sn strand by atomic resolution microscopy
Speaker:
Z. Sung, et al.(National High Magnetic Field Laboratory)
Slides
49
Development of Tube Type Nb3Sn Conductor and its Application
Speaker:
X. Peng, et al.(Hyper Tech Research Inc.)
Slides
50
Correlation of A15 microstructure and transport in Nb3Sn tube type and Rod-in-Tube (RIT) strands: the influence of heat treatments, Cu/Sn ratio, and filament size
Speaker:
M. Sumption(The Ohio State University)
Slides
51
"Fabrication of Fine Grain Ta Diffusion Barrier Tube for Nb3Sn Conductors"
Speaker:
K.T. Hartwig, et al.(Texas A&M University)
Slides
Materials Evaluation and Testing Methods: 2MOrD1 oralsKahtnu 1
Kahtnu 1
Conveners:
Arata Nishimura(NIFS), Klaus Peter Weiss(KIT)
52
Irradiation imposed degradation of the mechanical and electrical properties of electrical insulation for future accelerator magnets
Speaker:
J. Polinski, et al.(Wroclaw University of Technology)
Slides
53
Some test results of new test facilities installed in radiation control area for investigation on neutron irradiation effect on superconducting properties
Speaker:
A. Nishimura, et al.(ITER Organization)
Slides
54
Measurement of the Mechanical Properties of Thin Film Polymers at Cryogenic Temperatures
Speaker:
W. Johnson, et al.(NASA Kennedy Space Center)
Slides
55
Characterization of Insulating Coatings for Wind-and-React Coil Fabrication
Speaker:
D.W. Cheng, et al.(Lawrence Berkeley National Laboratory)
High Current HTS Cables and Conductor Composites: 3MOrC2 oralsKahtnu 2
Kahtnu 2
Conveners:
Danko Van der Laan(NIST), Francesco Grilli(KIT)
56
[Invited] High-temperature superconducting Conductor on Round Core magnet cables operated at high current ramp rates in background fields of up to 19 T
Speaker:
D. Van der Laan, et al.(Advanced Conductor Technologies and University of Colorado)
Slides
57
Design, Fabrication and Testing of Terminations for Helium Gas Cooled Superconducting DC Cable
Speaker:
D. Crook, et al.(The Florida State University)
Slides
58
Design of high current superconducting DC power cable using the longitudinal magnetic field configuration
Speaker:
T. Matsushita, et al.(Kyushu Institute of Technology)
Slides
59
Design of high current density, oxide - metal composite superconductors with superior stability, stress and strain tolerance for very high field applications
Speaker:
A. Otto, et al.(Solid Material Solutions)
Slides
60
Critical current density in REBCO coated conductors in longitudinal magnetic field
Speaker:
T. Matsushita, et al.(Kyushu Institute of Technology)
Slides
61
Extraction of local Jc(B,θ) dependence from measured Ic(H,θ) characteristics and its use for evaluating self-field effects in REBCO coated conductor devices
Speaker:
F. Grilli, et al.(Karlsruhe Institute of Technology)
Slides
62
Effect of thermo-mechanical processing on the material properties at low temperature of a large size Al-Ni stabilized Nb-Ti/Cu superconducting cable
Speaker:
S. Langeslag, et al.(CERN & University of Twente)
Slides
Polymers, Resins, and Composite Materialsat Cryogenic Temperatures: 3MOrC1 oralsKahtnu 1
Kahtnu 1
Conveners:
David Evans(Advanced Cryogenic Materials), Dick Reed(CMI)
63
The ITER Pre-Compression Rings - A First in Cryogenic Composite Technology
Speaker:
H. Rajainmaki, et al.(Fusion for Energy)
Slides
64
Multi-scale analysis and characterisation of the ITER PRE-COMPRESSION RINGS
Speaker:
A. Foussat, et al.(ITER Organisation)
Slides
65
Low-Temperature Mechanical Properties of Glass/Epoxy Laminates
Speaker:
D. Reed, et al.(Cryogenic Materials, Inc.)
Slides
66
Essential Design, Construction and Test Elements of ITER Axial Insulating Breaks
Speaker:
F. Rodriguez Mateos, et al.(Advanced Cryogenic Materials)
Slides
67
Mechanical behaviors of hyberbranched epoxy resin toughened bisphenol F epoxy resin for cryogenic applications
Speaker:
J. Li, et al.(Key Laboratory of Cryogenics,Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
Slides
12:30
Lunch
MgB2 Precursors, Bulk, Wires, Tapes, and Cables: 3MOrD1 oralsKahtnu 1
