CEC-ICMC 2015 - Timetable, Abstracts and Presentations

Material Package

Added Since

Include only attachments uploaded after this date

Include*

Everything

Specific sessions

Specific contributions

Specific days

Sessions*

C1PoK - Superconducting Magnets I

C1PoL - Thermal Insulation

C1PoB - Intermediate Temperature Systems

C1PoC - Vuilleumier Cryocoolers and Cooler Analyses

C1PoD - Cryogenic Distribution Systems

C1PoE - Thermal Fluids (Non-Aerospace)

C1PoF - Circulators, Pumps and Regnerators

C1PoG - Thermal Analysis and Design

C1PoH - Aerospace Cryocoolers Analysis and Experimentation

C1PoJ - Novel Concepts and New Devices I

C3PoA - Controls and Simulation

C3PoB - Cryo Controls

C2PoP - Mixed-Gas Properties

C2PoQ - Safety, Reliability, and Standards

C2PoM - Novel Concepts and New Devices II

C2PoN - Cryogenic Power Cables and Leads II

C2PoK - Instrumentation and Controls II

C2PoL - Thermal Fluids (Aerospace Applications)

C3PoC - Convective Heat Transfer

C3PoD - Superconducting Magnets Cryogenic Systems I

C1PoA - Cryogenics for Power Applications, Energy, Fuels and Transportation I

M3PoA - Superconductor Materials IV: Properties and Applications

M3PoB - Cryogenic Materials VI: Insulation

C3PoE - Turbomachines and Helium Components

C2PoE - CFD Modelling and Measurements Techniques

C2PoD - Superconducting RF Systems II

C2PoG - Heat Exchangers

C2PoF - Test Facilities

C2PoA - Cryogenic Systems I

C2PoC - Instrumentation and Controls I

C2PoB - Stirling and Pulse Tube Cryocoolers

C2PoJ - Joule-Thomson Coolers

C2PoH - Hydrogen Systems

M2PoD - Cryogenic Materials IV: Physical Properties

M2PoC - Superconductor Cables II: HTS

M1PoA - Superconducting Materials and Applications

M2PoB - Cryogenic Materials III: Testing and Methods

M2PoA - Superconductors Materials II: Nb3Sn, FeAs-based

M1PoC - Cryogenic Electronics

M1PoB - Cryogenic Materials II: Properties and Treatments

M3OrA - Superconductor Wires III: Thin Films

M3OrC - Superconductor Wires V: BSCCO Processing and Properties

M3OrD - Invited Panel Session Part I: Superconducting Wind Turbines, Rotating Machines, and Materials

C4OrB - Pulse Tube Configurations

C4OrA - System Issues and Regenerator Performance

C3OrH - Cryogenic Safety

C3OrG - Cryogenic Instrumentation and Control Systems

C3OrK - Special Session: JT Coolers

C3OrJ - Special Session: Helium II Properties and Systems

C3OrD - 4K Cryocoolers

C3OrC - Mixed Gases

C3OrF - Superconducting Magnets Cryogenic Systems II

C3OrE - Operating Experience II

CSA Short Courses (8:00 - 17:00)

M3OrB - Superconductor Wires IV: MgB2 and Applications

M2OrB - Superconductor Wires I: Testing and Characterization

M3OrE - Invited Panel Session Part II: Superconducting Wind Turbines, Rotating Machines, and Materials

C1OrH - Aerospace Cryocoolers

C1OrG - Superconducting RF Systems I

C1OrB - Cryogenic Heat Transfer

C1OrA - Cryocoolers for Superconducting Applications

C1OrF - Thermal Insulation Applications and Measurements

C1OrE - Refrigeration and Liquefaction - sponsored by TechSource, Inc.

C1OrD - Low Temperature Aerospace Cryocoolers

C1OrC - Compressors & Expanders

C4OrC - Cryogenic Systems and Facilities

C4OrD - Novel Concepts and New Devices III

M1PL - Monday ICMC Plenary Session

C2PL - Tuesday CEC Plenary Session - sponsored by Cryomech, Inc.

CEC Awards

Cryogenic Society of America (CSA) Awards

M3PL - ICMC Plenary Session - sponsored by the IEEE Council on Superconductivity

C4PL - CEC Plenary Session

Registration Open (15:00 - 20:00)

M1OrA - Superconductor Cables I: HTS and LTS

M1OrC - Superconductor Stability and AC Losses

M1OrB - Cryogenic Materials I: Testing and Methods

M2OrA - Superconductor Materials III: Nb3Sn

M1OrD - Superconductor Materials I: Bulk and New Materials

M2OrD - Cryogenic Materials V: Structural Materials

M2OrC - Superconductor Wires II: Coated Conductors and Applications

C3OrA - Operating Experience I

C3OrB - Aerospace Systems

C2OrG - Hydrogen and Other Systems

C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II

C2OrE - Cryogenic Systems II

C2OrF - Superconducting Magnets II

C2OrC - Pulsating Heat Pipes and Thermosyphons

C2OrD - CFD and Numerical Modelling

C2OrA - Cryogenic Power Cables and Leads I

C2OrB - Large Capacity Coolers

Opening & ICMC Awards

Include materials from selected sessions

Contributions*

2K Pump Down Studies at SNS (in session "C3OrA - Operating Experience I")

5-year operation experience with the 1.8 K refrigeration units of the LHC cryogenic system (in session "C3OrE - Operating Experience II")

15 K LIQUID HYDROGEN THERMAL ENERGY STORAGE UNIT FOR FUTURE ESA SCIENCE MISSIONS (in session "C4OrD - Novel Concepts and New Devices III")

330 W Cryocooler Developments and Testing (in session "C2OrB - Large Capacity Coolers")

[Invited] Advances in Overpressure Processing Bi-2212 Insert Coils in a New, Large Overpressure Furnace (in session "M3OrC - Superconductor Wires V: BSCCO Processing and Properties")

[Invited] Cost Comparison Studies of Different Superconductors for a Direct Drive Wind Generator (in session "M3OrD - Invited Panel Session Part I: Superconducting Wind Turbines, Rotating Machines, and Materials")

[Invited] Demonstration of Advanced Superconductors with Four-fold Improved Performance for High Power Wind Generators (in session "M3OrE - Invited Panel Session Part II: Superconducting Wind Turbines, Rotating Machines, and Materials")

[Invited] DESIGN AND FABRICATION OF A CRYOSTAT FOR LOW TEMPERATURE MECHANICAL TESTING FOR THE MECHANICAL AND MATERIAL’S ENGINEERING GROUP AT CERN (in session "M1OrB - Cryogenic Materials I: Testing and Methods")

[Invited] Development of MgB2 superconductors and coils for practical applications (in session "M3OrB - Superconductor Wires IV: MgB2 and Applications")

[Invited] Effectiveness of laser striation for AC loss reduction in SuperOx coated conductor. (in session "M1OrC - Superconductor Stability and AC Losses")

[Invited] ESS Cryogenic System Process Design (in session "C1OrE - Refrigeration and Liquefaction - sponsored by TechSource, Inc.")

[Invited] Feasibility study project to realize the merits of 10 MW-class superconducting wind turbine generators (in session "M3OrD - Invited Panel Session Part I: Superconducting Wind Turbines, Rotating Machines, and Materials")

[Invited] Giant Field Leap in Bulk HTS – A Systematic Failure of the Critical State Model (in session "M1OrD - Superconductor Materials I: Bulk and New Materials")

[Invited] Heat transfer during bubble shrinking in saturated He II under microgravity condition (in session "C3OrJ - Special Session: Helium II Properties and Systems")

[Invited] High Field Superconducting Machines (in session "M3OrE - Invited Panel Session Part II: Superconducting Wind Turbines, Rotating Machines, and Materials")

[Invited] High Performance REBCO Coated Conductors for High Field and AC Applications (in session "M2OrC - Superconductor Wires II: Coated Conductors and Applications")

[Invited] LOW TEMPERATURE- HIGH FIELD PERFORMANCES OF IRON CALCHOGENIDES THIN FILMS (in session "M3OrA - Superconductor Wires III: Thin Films")

[Invited] Modular and Repairable Superconducting Wind Turbine Generators 5-20MW (in session "M3OrE - Invited Panel Session Part II: Superconducting Wind Turbines, Rotating Machines, and Materials")

[Invited] Production and integration of 2G HTS tapes into HTS devices (in session "M2OrC - Superconductor Wires II: Coated Conductors and Applications")

[Invited] Recent advances in iron-based superconducting wires and tapes (in session "M1OrD - Superconductor Materials I: Bulk and New Materials")

[Invited] Record engineering current density of 246 A/mm2 at 17 T in HTS Conductor on Round Core (CORC) cables made at Advanced Conductor Technologies (in session "M1OrA - Superconductor Cables I: HTS and LTS")

[Invited] Study of Temperature Wave Propagation in Superfluid Helium to Cool Radio-Frequency Cavities (in session "C3OrJ - Special Session: Helium II Properties and Systems")

[Invited] Superconducting Detector Magnets for the proposed 100 TeV Future Circular Collider (in session "C2OrF - Superconducting Magnets II")

[Invited] Superconducting Wind Generators: Development and Challenges (in session "M3OrD - Invited Panel Session Part I: Superconducting Wind Turbines, Rotating Machines, and Materials")

[Invited] The origin of strain sensitivity in Nb3Sn (in session "M2OrA - Superconductor Materials III: Nb3Sn")

[Invited] The Processing of Bulk, Melt Processed (RE)BCO Superconductors with World Record Fields (in session "M1OrD - Superconductor Materials I: Bulk and New Materials")

A conceptual study on the use of a regenerator in a hybrid energy storage unit (LIQHYSMES) (in session "C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II")

A Cryogen Recycler with Pulse Tube Cryocooler for Simultaneously Recondensing Helium and Nitrogen (in session "C4OrD - Novel Concepts and New Devices III")

A cryogenic tensile testing apparatus for micro-samples cooled by miniature pulse tube cryocooler (in session "M2PoB - Cryogenic Materials III: Testing and Methods")

A dynamic optical measurement system for cryogenic fluids using laser interferometry (in session "C4OrD - Novel Concepts and New Devices III")

A new 2 K superconducting half-wave cavity cryomodule for PIP-II (in session "C1OrG - Superconducting RF Systems I")

A new cryogenic test facility for large superconducting devices at CERN (in session "C4OrC - Cryogenic Systems and Facilities")

A Simulink Library of cryogenic components to automatically generate control schemes for large Cryorefrigerators. (in session "C3PoA - Controls and Simulation")

A study on intermediate buffer layer of a coated Fiber Bragg Grating cryogenic temperature Sensors. (in session "C3OrG - Cryogenic Instrumentation and Control Systems")

A Study on the CryoTel® DS 1.5 Cryocooler for Higher Cooling Capacity (in session "C2PoB - Stirling and Pulse Tube Cryocoolers")

A thermally-conductive electrical isolator for use at ultra-low temperatures in the Astro-H Adiabatic Demagnetization Refrigerator (in session "C1OrB - Cryogenic Heat Transfer")

AC LOSSES MODELS FOR LOW-TC SUPERCONDUCTORS (in session "M2OrB - Superconductor Wires I: Testing and Characterization")

Adaptation of refrigeration compressors for Joule-Thomson cryocoolers fed with gas mixtures (in session "C1OrC - Compressors & Expanders")

ADVANCED AND ENERGY SAVING THERMAL INSULATIONS FOR CRYOGENIC APPLICATIONS (in session "C1OrF - Thermal Insulation Applications and Measurements")

Air Force Research Laboratory Spacecraft Cryocooler Endurance Evaluation Final Report (in session "C1PoH - Aerospace Cryocoolers Analysis and Experimentation")

Air Liquide latest developments of turbomachines : from design to commissioning (in session "C3PoE - Turbomachines and Helium Components")

An Analytical Approach to Designing a Thermosiphon Cooling System for Large Scale Superconducting Magnets (in session "C3PoD - Superconducting Magnets Cryogenic Systems I")

An overview of Ball cryogen storage and delivery dewar systems (in session "C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II")

Analytical Investigation in Bending Characteristic of Twisted Stacked-Tape Cable Conductor (in session "M2PoC - Superconductor Cables II: HTS")

Anisotropic fracture toughness properties of a Nitronic 50 forging at 4.2 K (in session "M2OrD - Cryogenic Materials V: Structural Materials")

Apparatus and method for low-temperature training of shape memory alloys (in session "M1OrB - Cryogenic Materials I: Testing and Methods")

Applications of Ortho-Para Hydrogen Catalyst (in session "C2OrG - Hydrogen and Other Systems")

ARIEL E-linac Cryogenic System: Commissioning and First Operational Experience (in session "C3OrA - Operating Experience I")

Assessment of Critical Factors Affecting the Performance of Trapped Field Magnets using Thin Film Superconductor Tapes (in session "M3PoA - Superconductor Materials IV: Properties and Applications")

Astro-particle shielding superconducting magnet cryogenic design for space travel missions (in session "C2PoL - Thermal Fluids (Aerospace Applications)")

Bulk Superconducting Materials – Ready for Applications? (in session "M1PL - Monday ICMC Plenary Session")

Calorimetric Measurements of AC losses in HTS coils and tapes in a Stator Environment (in session "M1OrC - Superconductor Stability and AC Losses")

Calorimetrically Measured Interstrand Contact Resistances and Coupling Magnetizations in Cored QXF-Type Nb3Sn Rutherford Cables for the LHC Quadrupole Upgrade (in session "M1OrC - Superconductor Stability and AC Losses")

Capillary cooling of superconducting coils (in session "C3OrF - Superconducting Magnets Cryogenic Systems II")

CERN experience and strategy for the maintenance of cryogenic plants and distribution systems (in session "C3OrE - Operating Experience II")

CFD analysis of straight and flared vortex tube (in session "C2OrD - CFD and Numerical Modelling")

CFD Simulation of the Gas Flow in a Pulse Tube Cooler with two Pulse Tubes (in session "C2PoE - CFD Modelling and Measurements Techniques")

CFD study on the effects of viscous shear in a hot cascade Ranque-Hilsch vortex tube (in session "C2OrD - CFD and Numerical Modelling")

Cold head maintenance with minimal service interruption (in session "C4OrA - System Issues and Regenerator Performance")

Commercialisation of pulse tube cryocoolers to produce 330 W and 1000 W at 77 K for liquefaction. (in session "C2OrB - Large Capacity Coolers")

Commercialization of a Turbo-Brayton cycle refrigerator for HTS power applications (in session "C1PoA - Cryogenics for Power Applications, Energy, Fuels and Transportation I")

Commissioning and Operation of the Horizontal Test Apparatus at SNS (in session "C1OrG - Superconducting RF Systems I")

Commissioning and Operational Results of Helium Refrigeration System at JLab for the 12GeV Upgrade (in session "C3OrA - Operating Experience I")

Commissioning and Operational Results of the 12 GeV Helium Compression System at JLab (in session "C3OrA - Operating Experience I")

Commissioning of the Cryogenic Safety Test Facility PICARD (in session "C3OrH - Cryogenic Safety")

Commissioning of the helium cryogenic system for the HIE-ISOLDE accelerator upgrade at CERN (in session "C2PoA - Cryogenic Systems I")

Comparison tests of cellular glass insulation for the development of cryogenic insulation standards (in session "C1OrF - Thermal Insulation Applications and Measurements")

Computational and experimental investigation of hydroformed niobium tubes for superconducting RF cavities (in session "C1OrG - Superconducting RF Systems I")

Computational Fluid Dynamic Investigation of Loss Mechanisms in a Pulse-Tube Refrigerator (in session "C2PoE - CFD Modelling and Measurements Techniques")

Computational Investigation of Superconducting Magnetic Energy Storage (SMES) Devices to Maximize Energy Density (in session "M1PoC - Cryogenic Electronics")

Conceptual Design and Thermal Analysis of a modular Cryostat for one single coil of a 10 MW Offshore Superconducting Wind Turbine (in session "C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II")

Conductance Degradation in HTS Coated Conductor Solder Joints (in session "M2OrC - Superconductor Wires II: Coated Conductors and Applications")

Construction of the Cryogenic System for IHEP-ADS Injector I (in session "C2PoA - Cryogenic Systems I")

Continuous Improvement at SuperPower of 2G HTS Wire for Demanding Applications (in session "M2OrC - Superconductor Wires II: Coated Conductors and Applications")

Contribution to the study of neon-nitrogen mixtures at low temperatures (in session "C2PoP - Mixed-Gas Properties")

Cool-down acceleration for G-M cryocoolers with thermal oscillations passively damped by helium (in session "C3OrD - 4K Cryocoolers")

Cooling topology options for HTS rotating superconducting machinery (in session "C1PoA - Cryogenics for Power Applications, Energy, Fuels and Transportation I")

Correlation of critical current density of bulk MgB2 having high connectivity between SC grains with concentration and distribution of higher magnesium borides and oxygen-enriched inhomogeneities, the role of Ti additions (in session "M3OrB - Superconductor Wires IV: MgB2 and Applications")

Coupled tests of the Closed Cycle Dilution Refrigerator and 3He compressor for space (in session "C1OrD - Low Temperature Aerospace Cryocoolers")

Critical Current Properties of HTS Twisted Stacked-Tape Cable in Subcooled Liquid Nitrogen (in session "M2PoC - Superconductor Cables II: HTS")

Cryogenic Considerations for Superconducting Magnet Design for the Material Plasma Exposure eXperiment (in session "C3PoD - Superconducting Magnets Cryogenic Systems I")

Cryogenic infrastructure supplied by Linde Kryotechnik AG for the Series Magnet Test Facility for FAIR (in session "C2OrE - Cryogenic Systems II")

Cryogenic Supply for the Facility for Antiproton and Ion Research (in session "C2OrE - Cryogenic Systems II")

Cryogenic System for the Cryomodule Test Stand at Fermilab (in session "C2PoD - Superconducting RF Systems II")

Cryogenic System for Turkish Accelerator Center (in session "C2OrE - Cryogenic Systems II")

Cryogenic System Operating Experience at SNS (in session "C3OrA - Operating Experience I")

Cryogenic system options for a superconducting aircraft propulsion system (in session "C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II")

Cryogenic Thermal Characteristics of Gaseous Helium mixtures with Neon and Hydrogen at High Pressures (in session "C3OrC - Mixed Gases")

Cryogenic thermometry for refrigerant distribution system of JT-60SA (in session "C2PoK - Instrumentation and Controls II")

Cryogenic turbulence test facilities at CEA/SBT (in session "C4OrC - Cryogenic Systems and Facilities")

Cryogenics on the Stratospheric TeraHertz Observatory (in session "C3OrB - Aerospace Systems")

Current sharing, quench, and normal zone propagation in YBCO CORC and Roebel cables (in session "M2PoC - Superconductor Cables II: HTS")

Cylindrical Boiloff Calorimeters for Testing of Thermal Insulation Systems (in session "C1PoL - Thermal Insulation")

Demonstration of Hybrid Multilayer Insulation for Fixed Thickness Applications (in session "C1OrF - Thermal Insulation Applications and Measurements")

Description and validation of the Little correlation for boiling zeotropic mixtures in horizontal tubes from cryogenic to room temperature (in session "C3OrC - Mixed Gases")

Design and manufacture of the large-bore 8T superconducting solenoid for the NAFASSY test facility (in session "C2OrF - Superconducting Magnets II")

Design and Operation of a Cryogenic Nitrogen Pulsating Heat Pipe (in session "C2OrC - Pulsating Heat Pipes and Thermosyphons")

Design and performance of a 3D printed liquid hydrogen tank with vapor cooled shielding for use in unmanned aerial vehicles (in session "C1PoL - Thermal Insulation")

Design challenges of a 20kW liquid hydrogen cooling system for The European Spallation Source cold moderators. (in session "C2PoH - Hydrogen Systems")

Design details of the current lead test facility Karlsruhe (CuLTKa) (in session "C2PoF - Test Facilities")

Design of a REBCO HTS Superconducting Undulator (in session "C1PoK - Superconducting Magnets I")

Design of a symmetric coupler for superconducting elliptical cavities. (in session "C2PoD - Superconducting RF Systems II")

Design of an improved high-cooling-power 4.2 K stage G-M cryocooler and helium compressor (in session "C3OrD - 4K Cryocoolers")

Design of cold compressor systems in terms of operational and economical aspects (in session "C1OrC - Compressors & Expanders")

DESIGN OF LOAD-TO-FAILURE TESTS OF HIGH-VOLTAGE ELECTRIC INSULATION BREAKS FOR ITER’S CRYOGENIC NETWORK. (in session "M1OrB - Cryogenic Materials I: Testing and Methods")

Design of the control system for the cryogenic distribution systems of the European XFEL project (in session "C3PoB - Cryo Controls")

DESIGN REALIZATION TOWARDS THE QUALIFICATION TEST OF ITER COLD CIRCULATOR (in session "C1PoF - Circulators, Pumps and Regnerators")

DESIGNING VAPOUR-COOLED AND FORCED-FLOW COOLED CURRENT LEADS FOR A NEW SEPARATING DEVICE (in session "M2PoC - Superconductor Cables II: HTS")

Development of 1 kW Stirling cryocooler with using linear compressor (in session "C2PoB - Stirling and Pulse Tube Cryocoolers")

Development of a cooling system for 66/6.9kV-20MVA REBCO superconducting transformers with a Ne turbo-Brayton refrigerator and subcooled liquid nitrogen (in session "C1PoA - Cryogenics for Power Applications, Energy, Fuels and Transportation I")

Development of a sorption-based Joule-Thomson cooler for the METIS instrument on E-ELT (in session "C3OrK - Special Session: JT Coolers")

Development of an oil-free compressor for GM and pulse tube cryocoolers (in session "C1OrC - Compressors & Expanders")

Development of cryogenic installations for large liquid argon based neutrino detectors (in session "C1PoB - Intermediate Temperature Systems")

Development of high efficiency Stirling cryocooler for high temperature superconducting motor (in session "C1OrA - Cryocoolers for Superconducting Applications")

Development of HTS induction/synchronous drive motor aiming for low carbon emission transportation systems (in session "C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II")

Development of integrated superconducting Quadrupole Doublet Modules for operation in the SIS100 Accelerator (in session "C2OrF - Superconducting Magnets II")

Development of linear compressor for compact 2K Gifford-McMahon cryocoolers (in session "C3PoE - Turbomachines and Helium Components")

Development of membrane cryostats for large liquid argon neutrino detectors (in session "C1PoJ - Novel Concepts and New Devices I")

Development of MgB2 conductors for low field coils and feeders in DEMO fusion energy reactors (in session "M1OrA - Superconductor Cables I: HTS and LTS")

Development of powder-in-tube-processed multifilamentary MgB2 long wires with different reinforcement structure (in session "M3OrB - Superconductor Wires IV: MgB2 and Applications")

Development of tools for advanced quench diagnostics at LBNL Magnet Test Facility (in session "C1PoK - Superconducting Magnets I")

Dielectric Properties of Cryogenic Gas Mixtures Containing Helium, Neon, and Hydrogen (in session "M1OrA - Superconductor Cables I: HTS and LTS")

Digital evaluation of filament distortion and RRR degradation in drawn and rolled PIT and RRP® Nb3Sn wires (in session "M2OrA - Superconductor Materials III: Nb3Sn")

Dimensional Changes of Nb3Sn Cables during Heat Treatment* (in session "C2OrF - Superconducting Magnets II")

Dynamic simulation of mixed refrigerant process for small-scale LNG plant (in session "C3PoA - Controls and Simulation")

Dynamic simulations of the cryogenic system of a tokamak (in session "C3OrG - Cryogenic Instrumentation and Control Systems")

Dynamics of liquid nitrogen cooling process of solid surface at wetting contact surface. (in session "C1PoE - Thermal Fluids (Non-Aerospace)")

Effect of DC flow on a three-stage Stirling pulse tube cryocooler working at liquid helium temperatures (in session "C1PoH - Aerospace Cryocoolers Analysis and Experimentation")

Effect of Discontinuities and Penetrations on the Shielding Efficacy of High Temperature Superconducting Magnetic Shields (in session "M2PoB - Cryogenic Materials III: Testing and Methods")

Effect of heat treatment and test barrel materials on critical current measurements of Ag/Bi2212 round wires using ITER barrel configurations (in session "M3PoA - Superconductor Materials IV: Properties and Applications")

Effect of microstructure on high-cycle fatigue properties of Alloy718 plates (in session "M2OrD - Cryogenic Materials V: Structural Materials")

Effect of operating frequency and phase angle on performance of Alpha Stirling cryocooler driven by a novel compact mechanism (in session "C2PoM - Novel Concepts and New Devices II")

Effect of Transport Current on Magnetization of an IBAD Coated Conductor (in session "M3PoA - Superconductor Materials IV: Properties and Applications")

Effects of oxygen doping on vortex pinning and connectivity in highly dense Bi-2212 round wire (in session "M3OrC - Superconductor Wires V: BSCCO Processing and Properties")

Electromagnetic behavior of striated coated conductors wound into pancake coils (in session "M1OrC - Superconductor Stability and AC Losses")

Engineering, Manufacture and Preliminary Testing of the ITER Toroidal Field (TF) Magnet Helium Cold Circulator (in session "C1OrC - Compressors & Expanders")

ESS accelerator plant process design (in session "C1OrE - Refrigeration and Liquefaction - sponsored by TechSource, Inc.")

Estimation of magnetocaloric properties by using Monte Carlo method for AMRR cycle (in session "C2PoM - Novel Concepts and New Devices II")

European XFEL-linac Feed and End cap dimensional tolerance validation (in session "C1PoD - Cryogenic Distribution Systems")

Exergy analysis of LNG boil-off gas reliquefaction systems (in session "C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II")

Expansion Vessel for Supercritical Hydrogen in a Spallation Neutron Source Moderator Circuit (in session "C1PoJ - Novel Concepts and New Devices I")

Experience with cryogenic operation of Accelerator Module Test Facility during testing of one third of XFEL cryomodules (in session "C3OrE - Operating Experience II")

Experimental and CFD analyses of a thermal radiation shield dimple plate for cryogenic pump application (in session "C2OrD - CFD and Numerical Modelling")

Experimental characterization of the ITER TF structure cooling in HELIOS test facility (in session "C3OrF - Superconducting Magnets Cryogenic Systems II")

Experimental comparison of Pressure ratio in Alpha and Gamma Stirling cryocoolers with identical compression space volumes and driven simultaneously by a solitary novel compact mechanism (in session "C4OrD - Novel Concepts and New Devices III")

Experimental investigation of 20 K two-stage layered active magnetic regenerative refrigerator (in session "C2PoH - Hydrogen Systems")

Experimental investigation of a Hydrogen Pulsating Heat Pipe (in session "C2OrC - Pulsating Heat Pipes and Thermosyphons")

Experimental study of stability and transients in a horizontally heated boiling helium thermosyphon (in session "C2OrC - Pulsating Heat Pipes and Thermosyphons")

Experimental verification of cylindrical adjustable inertance tube for pulse tube refrigerators (in session "C4OrB - Pulse Tube Configurations")

Fabrication of Biomedical Titanium Alloys with High Strength and Low Modulus by Spark Plasma Sintering (in session "M1PoB - Cryogenic Materials II: Properties and Treatments")

Fast-response, active gas-gap heat switches for low temperature applications (in session "C3OrG - Cryogenic Instrumentation and Control Systems")

Film Boiling Heat Transfer from a Wire to Upward Flow of Liquid Hydrogen and Liquid Nitrogen (in session "C3PoC - Convective Heat Transfer")

Final Report on the Controlled Cold Helium Spill Test in the LHC Tunnel at CERN (in session "C2PoQ - Safety, Reliability, and Standards")

First helium measurements with a new cryogenic flow meter (in session "C2PoK - Instrumentation and Controls II")

First results from the Cornell high Q cw full linac cryo-module (in session "C1OrG - Superconducting RF Systems I")

Flat Plate Boiloff Calorimeters for Testing of Thermal Insulation Systems (in session "C1PoL - Thermal Insulation")

Flow of nitrogen gas in a liquid helium cooled vacuum tube: Condensation heat transfer (in session "C1OrB - Cryogenic Heat Transfer")

Forced flow heat transfer from a round wire in a vertically-mounted pipe to supercritical hydrogen (in session "C3PoC - Convective Heat Transfer")

Forced Two-Phase Helium Cooling Scheme for Mu2e Transport Solenoid (in session "C3OrF - Superconducting Magnets Cryogenic Systems II")

FRIB Cryogenic Distribution System (in session "C1PoD - Cryogenic Distribution Systems")

FRIB Cryogenic Plant Status (in session "C2PoA - Cryogenic Systems I")

Gas gap heat switch for a Cryogen-free magnet system (in session "C3PoD - Superconducting Magnets Cryogenic Systems I")

Ground Operations Demonstration Unit for Liquid Hydrogen Initial Test Results (in session "C2OrG - Hydrogen and Other Systems")

Heat Treatment Sensitivity of ITER Nb3Sn Wire for CS Magnets (in session "M2PoA - Superconductors Materials II: Nb3Sn, FeAs-based")

Helium Recovery at the National High Magnetic Field Laboratory (in session "C2PoF - Test Facilities")

Helium Sourcing ... Calmer seas ahead ? (in session "C2OrE - Cryogenic Systems II")

Helium–Hydrogen PVT-x Measurements and Equation of State (in session "C3OrC - Mixed Gases")

Hierarchy of Two-Phase Flow Models for Autonomous Control of Cryogenic Loading Operation (in session "C2OrD - CFD and Numerical Modelling")

High Precision Interferometric Dilatometer For Cryogenic Environments. (in session "C4OrD - Novel Concepts and New Devices III")

High resolution NMR measurements by using a 400 MHz (9.39 T) LTS/REBCO NMR magnet with a best mix use of various field correction methods ~ Towards a super-high field/compact type of NMR magnet ~ (in session "C1PoK - Superconducting Magnets I")

High Strain and Twisting Tolerance in AIMI and PIT MgB2 Strands (in session "M3PoA - Superconductor Materials IV: Properties and Applications")

High-entropy alloys prepared by high-gravity combustion synthesis and their cryogenic properties (in session "M2OrD - Cryogenic Materials V: Structural Materials")

Highly Formable Tantalum Barrier for Nb3Sn Conductors (in session "M2PoA - Superconductors Materials II: Nb3Sn, FeAs-based")

HTS cooling below 60 K with two-stage mixed-refrigerant cascades using low-flammability mixtures (in session "C1PoB - Intermediate Temperature Systems")

Hydrogen Environment Embrittlement on Austenitic Stainless Steels from Room Temperature to Low Temperatures (in session "M2OrD - Cryogenic Materials V: Structural Materials")

Hydrogen refrigeration via kinetic para-ortho manipulation in a vortex tube (in session "C1PoJ - Novel Concepts and New Devices I")

Impact of Cryogenic/Superconducting Components for Hybrid-Electric Aircraft Propulsion (in session "C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II")

Implementation of the thermodynamic and phase transition equations of superfluid helium in a CFD software (in session "C3OrJ - Special Session: Helium II Properties and Systems")

Improvement of tube type Nb3Sn conductor in Hyper Tech (in session "M2OrA - Superconductor Materials III: Nb3Sn")

In-Flight Performance of the OCO-2 Cryocooler (in session "C1OrH - Aerospace Cryocoolers")

Influence of tailored MLI for complex surface geometries on heat transfer (in session "C1OrF - Thermal Insulation Applications and Measurements")

Influence of thermophysical properties of working fluid on the design of cryogenic turboexpanders using ns-ds diagram (in session "C3PoE - Turbomachines and Helium Components")

Influence of ZnO and Dy2O3 on MgB2 Bulks Fabricated by High Temperature and Pressure Reaction (in session "M1OrD - Superconductor Materials I: Bulk and New Materials")

Infulence of neutron irradiation on conduction cooling superconducting magnets (in session "C1PoK - Superconducting Magnets I")

Insulation system for high temperature superconductor cables (in session "M3PoB - Cryogenic Materials VI: Insulation")

Irreversible tensile stress of 2G HTS wires made by IBAD-MOCVD on Hastelloy substrates (in session "M2OrB - Superconductor Wires I: Testing and Characterization")

ITER: Test protocol to demonstrate the Cryogenic Helium plant performances (in session "C1OrE - Refrigeration and Liquefaction - sponsored by TechSource, Inc.")

Kinetic Analysis of MgB2 Layer Formation in Advanced Internal Magnesium Infiltration (AIMI) Processed MgB2 wires (in session "M3OrB - Superconductor Wires IV: MgB2 and Applications")

Large 'pulse-tube' oxygen liquefier for CVN-78 carriers: an update (in session "C2OrB - Large Capacity Coolers")

Large Jc enhancement and matching effects by Ba2Y(Nb/Ta)O6 nanocolumns in YBa2Cu3O7-x thin films (in session "M3OrA - Superconductor Wires III: Thin Films")

Lessons learned concerning the Cool-down of Superconducting Magnets using a Thermal Siphon Cooling-loop (in session "C3OrF - Superconducting Magnets Cryogenic Systems II")

Linear Resonance Compressor for Stirling-Type Cryocoolers Activated by Piezoelectric Stack-Type Elements (in session "C2PoB - Stirling and Pulse Tube Cryocoolers")

Liquid hydrogen Moderator optimization for Neutron Sources with high brilliance (in session "C2PoM - Novel Concepts and New Devices II")

Liquid Nitrogen Historical and Current Usage of the Central Helium Liquefier at SNS (in session "C2PoA - Cryogenic Systems I")

Liquid Nitrogen Spray Cooling for Superconducting Power Cable (in session "C2PoN - Cryogenic Power Cables and Leads II")

LNG systems for natural gas propelled ships (in session "C2OrH - Cryogenics for Power Applications, Energy, Fuels and Transformation II")

Load specification and embedded plate definition for the ITER cryoline system (in session "C1PoD - Cryogenic Distribution Systems")

Local Cryogenics for the SIS100 at FAIR (in session "C2OrE - Cryogenic Systems II")

Lockheed Martin Joule-Thomson Compressor Development (in session "C1OrD - Low Temperature Aerospace Cryocoolers")

Low-temperature negative thermal expansion in Al doped La(Fe,Si)13 compounds (in session "M2PoD - Cryogenic Materials IV: Physical Properties")

Low-temperature thermal conductivity of highly porous copper (in session "C1OrB - Cryogenic Heat Transfer")

Magnetic and Structural Design of a 15 T Nb3Sn Accelerator Dipole Model (in session "C1PoK - Superconducting Magnets I")

Magnetization losses in MgB2 wire matrix material (in session "M1OrC - Superconductor Stability and AC Losses")

Material characterisation and preliminary mechanical design for the HL-LHC shielded beam screens operating at cryogenic temperatures. (in session "M2PoB - Cryogenic Materials III: Testing and Methods")

Materials for damping the PTC-induced thermal fluctuations of the cold-head (in session "M2PoB - Cryogenic Materials III: Testing and Methods")

MatISSE Microcryocooler (in session "C1OrH - Aerospace Cryocoolers")

Measurements of magnetization of YBCO CORC and Roebel Cables at 4.2 K (in session "M2PoC - Superconductor Cables II: HTS")

Measurements of YBCO pancake coils: thermal conductivity, quench, and NZP at 4.2 K and 10 T. (in session "M1PoA - Superconducting Materials and Applications")

Mechanical behavior of Bi2Sr2CaCu2O8+x wire with a detailed study of sample preparation techniques (in session "M2OrB - Superconductor Wires I: Testing and Characterization")

Mechanical problems for a Ni-alloy reinforced Bi-2223/Ag conductor -Towards a super-high field compact magnet- (in session "C1PoK - Superconducting Magnets I")

Mechanical Robustness of Cryogenic Temperature Sensors Packaged in a Flat, Hermetically-Sealed Package (in session "C3OrG - Cryogenic Instrumentation and Control Systems")

Modeling the Adsorption of Mixed-Gases Based on Pure Gas Adsorption Properties (in session "C3OrK - Special Session: JT Coolers")

Modeling Thermal Parasitic Load Lines for an Optical Refrigerator (in session "C1PoJ - Novel Concepts and New Devices I")

Modelling AC ripples in HTS coated conductors (in session "M1OrC - Superconductor Stability and AC Losses")

Modelling and Testing of Fin-type Heat Exchangers for the ITER Current Leads (in session "C2PoN - Cryogenic Power Cables and Leads II")

Modification of liquid hydrogen tank for integrated refrigeration and storage (in session "C2OrG - Hydrogen and Other Systems")

MOI study of grain boundary transparencies in [001] tilt (Yb0.7Ca0.3)Ba2Cu3O7-d 6 and 9 degree bi-crystal thin films. (in session "M3OrA - Superconductor Wires III: Thin Films")

Molecular dynamics for homogeneous nucleation of water and carbon dioxide in different carrier gases (in session "C3OrC - Mixed Gases")

Multi-Layer Aerogel Insulation for Cryogenic Applications (in session "C1PoL - Thermal Insulation")

Multi-slope warm-up calorimetry of Integrated Dewar-Detector Assemblies (in session "C2PoL - Thermal Fluids (Aerospace Applications)")

Nanoparticle Ag-enhanced textured-powder Bi-2212/Ag wire technology (in session "M3OrC - Superconductor Wires V: BSCCO Processing and Properties")

Neon Helium Mixtures as a Refrigerant for the FCC Beam Screen Cooling: Comparison of Cycle Design Options (in session "C1PoG - Thermal Analysis and Design")

New developments in Joule Thomson microcooling at the University of Twente (in session "C4OrD - Novel Concepts and New Devices III")

New measurements of multilayer insulation at variable cold temperature and elevated residual gas pressures (in session "C1PoL - Thermal Insulation")

Non-destructive characterization of local Ic variation in a long length Bi-2223 tape (in session "M2OrB - Superconductor Wires I: Testing and Characterization")

Numerical and Experimental Investigation of the Electromechanical Behavior of REBCO Tapes and Cables (in session "M2PoC - Superconductor Cables II: HTS")

Numerical and experimental verification of physical blast thermodynamic model (in session "C3OrH - Cryogenic Safety")

Numerical simulation and experimental investigation of a novel Scotch yoke for a Gifford-McMahon cryocooler (in session "C3OrD - 4K Cryocoolers")

Numerical Simulation of Heat Transfer for Wall-type and Fin-type Heat Exchanger (in session "C3PoC - Convective Heat Transfer")

Numerical studies on the phase adjustment systems of high frequency pulse tube cryocooler with a gradient temperature distribution (in session "C1PoC - Vuilleumier Cryocoolers and Cooler Analyses")

Occurrence of thermoacoustic phenomena at 0.8 K, 4 K and above (in session "C1PoE - Thermal Fluids (Non-Aerospace)")

Operating parameters of liquid helium transfer lines used with continuous flow cryostats at low sample temperatures (in session "C2PoC - Instrumentation and Controls I")

Operational Experiences of J-PARC cryogenic hydrogen system for a spallation neutron source (in session "C2PoH - Hydrogen Systems")

OPERATIONAL HISTORY OF LIQUID HYDROGEN TANK WITH GLASS BUBBLES INSULATION (in session "C1OrF - Thermal Insulation Applications and Measurements")

Optimization of Cryogenic Chilldown and Loading Operation Using SINDA/FLUINT (in session "C2PoL - Thermal Fluids (Aerospace Applications)")

Optimized and practical electrical joints for CORC type HTS cables (in session "M2PoC - Superconductor Cables II: HTS")

Optimizing Flux Pinning of YBa2Cu3O7-δ (YBCO) Thin Films with Unique Large Nanoparticle Size and High Concentration of Y2BaCuO5 (Y211) Additions (in session "M1PoA - Superconducting Materials and Applications")

Optimizing Flux Pinning of YBCO Thin Films with BZO + Y2O3 Double-Mixed Phase Additions (in session "M1PoA - Superconducting Materials and Applications")

Panel Wrap-up & Discussion (in session "M3OrE - Invited Panel Session Part II: Superconducting Wind Turbines, Rotating Machines, and Materials")

Peak Current Limiting Properties of SFCL with Parallel Connected Coils using Two Magnetic Paths (in session "C1PoA - Cryogenics for Power Applications, Energy, Fuels and Transportation I")

Performance analysis of a miniature Joule-Thomson cryocooler with and without the distributed J-T effect (in session "C3OrK - Special Session: JT Coolers")

Performance analysis of cryogenic system and cryomodules for the complete superconducting linear accelerator at IUAC, New Delhi. (in session "C2OrE - Cryogenic Systems II")

Performance analysis of superconducting generator electromagnetic shielding (in session "C1PoA - Cryogenics for Power Applications, Energy, Fuels and Transportation I")

Performance evaluation of a developed orifice type heater for thermal compensation control at J-PARC cryogenic hydrogen system (in session "C2PoH - Hydrogen Systems")

Performance of a 10 kJ SMES Model Cooled by Liquid Hydrogen Thermo-Siphon Flow for ASPCS Study (in session "C1PoA - Cryogenics for Power Applications, Energy, Fuels and Transportation I")

Performance of conduction-cooled HTS Magnet in radio blackout mitigation experiment (in session "C3PoD - Superconducting Magnets Cryogenic Systems I")

Performance of Cryogenic Thermal Insulation Materials under Liquid Hydrogen Environment (in session "C1OrF - Thermal Insulation Applications and Measurements")

Performance of the cold powered diodes and diode leads in the main magnets of the LHC (in session "C2OrF - Superconducting Magnets II")

Performance test of a 1 L liquid hydrogen fuel tank for unmanned aerial vehicles. (in session "C3OrB - Aerospace Systems")

Performance Test of the Cryogenic Cooling System for the Superconducting Fault Current Limiter (in session "C1PoB - Intermediate Temperature Systems")

Performance Testing of a 15K Pulse Tube Cooler for Space Applications (in session "C1OrD - Low Temperature Aerospace Cryocoolers")

Periodic Flow Hydrodynamic Resistance Parameters for ErPr Rare-Earth Regenerator Material at Cryogenic Temperatures (in session "C4OrA - System Issues and Regenerator Performance")

Permanent effect of a cryogenic spill on fracture properties of structural steels (in session "M2OrD - Cryogenic Materials V: Structural Materials")

Persistent Current Characteristics at Temperatures Below 77K in Closed Superconducting Loops Made Out of RE123 Coated Conductors (in session "M2OrC - Superconductor Wires II: Coated Conductors and Applications")

Persistent Magnetization and Decay in Bi:2212, YBCO, and Nb3Sn and influence on Accelerator Magnet Field Errors (in session "M1OrA - Superconductor Cables I: HTS and LTS")

Physical properties of material useful for predicting stability and quench propagation in high-field Bi-2212 magnets (in session "M1PoA - Superconducting Materials and Applications")

Predicting performance of axial pump of lox booster turbopump of staged combustion cycle based rocket engine using CFD (in session "C3PoE - Turbomachines and Helium Components")

Prediction of two-phase pressure drop in heat exchanger for mixed refrigerant Joule–Thomson cryocooler (in session "C2PoJ - Joule-Thomson Coolers")

Preliminary Design of Helium Refrigeration System for RAON (in session "C2PoA - Cryogenic Systems I")

Preliminary design of the beam screen cooling for the Future Circular Collider of hadron beams (in session "C1PoG - Thermal Analysis and Design")

Pressure and temperature fluctuation simulation of J-PARC cryogenic hydrogen system (in session "C2PoH - Hydrogen Systems")

Processing of Bi2Sr2CaCu2Ox superconductors via direct oxidation of metallic precursors (in session "M3OrC - Superconductor Wires V: BSCCO Processing and Properties")

Progress and Status of Cryogenic Refrigeration System for Project Hydra (in session "C4OrC - Cryogenic Systems and Facilities")

Progress in Development of a 10 kW Brayton Cryocooler for HTS Cable in Korea (in session "C1PoB - Intermediate Temperature Systems")

Progress on fabricating seamless RRR Nb tubes for SRF applications (in session "C2PoD - Superconducting RF Systems II")

Progress towards commercial 2212 by the integrated development of powder and wire processes (in session "M3OrC - Superconductor Wires V: BSCCO Processing and Properties")

Properties of two stage Adiabatic Demagnetization Refrigerator (in session "C1PoH - Aerospace Cryocoolers Analysis and Experimentation")

Proposed Thermodynamic Nomenclature of Cryogenic Refrigeration Cycles for Liquefaction of Natural Gas (in session "C1PoG - Thermal Analysis and Design")

Pulsed field stability and AC loss of Nb3Sn CICCs by quantitative modeling and experiments (in session "M1OrC - Superconductor Stability and AC Losses")

Pumping speed studies of activated carbons at 4.2 K adhered to indigenously developed hydroformed cryopanels (in session "C1PoG - Thermal Analysis and Design")

Qualification campaign of the 50 mK sorption-ADR cooler for SPICA/SAFARI (in session "C1OrD - Low Temperature Aerospace Cryocoolers")

Qualification of Electron-Beam Welded Joints between Copper and Stainless Steel for Cryogenic Application (in session "M1PoB - Cryogenic Materials II: Properties and Treatments")

Quantifying MLI Thermal Conduction in Cryogenic Applications from Experimental Data (in session "C1OrF - Thermal Insulation Applications and Measurements")

Quench Characteristics of Conduction-cooled 6T NbTi Magnet System (in session "C2OrF - Superconducting Magnets II")

Quench detection via Rayleigh scattering based fiber optic distributed sensors (in session "M2PoB - Cryogenic Materials III: Testing and Methods")

Quench induced critical current degradation in REBCO coated conductor and Bi2223 tape (in session "M1PoA - Superconducting Materials and Applications")

R&D status of highly efficient Stirling-type cryocooler for superconducting drive motor (in session "C1OrA - Cryocoolers for Superconducting Applications")

Raytheon Advanced Miniature Cryocooler Characterization Testing (in session "C1OrH - Aerospace Cryocoolers")

Recent development status of compact 2K GM cryocoolers (in session "C3OrD - 4K Cryocoolers")

Recent Development Status of High-Capacity 4K Pulse Tube Cryocooler (in session "C3OrD - 4K Cryocoolers")

Recent NASA/GSFC Cryogenic Measurements of the Total Hemispheric Emissivity of Black Surface Preparations (in session "M2PoB - Cryogenic Materials III: Testing and Methods")

RECENT PROGRESS OF CRYOGENIC SYSTEM FOR 40T HYBRID MAGNET (in session "C3PoD - Superconducting Magnets Cryogenic Systems I")

Reduction in variation in refrigeration temperature for a sorption compressor based J-T cooler (in session "C3OrK - Special Session: JT Coolers")

Relationship between the Thermal Expansion and Spontaneous Magnetization in LaFe13-xAlx (1.2≤x≤1.8) Rare Earth Intermetallic Compounds (in session "M2PoD - Cryogenic Materials IV: Physical Properties")

Requirements for quadrupole magnet conductor for the United States contribution to the high-luminosity upgrade of the Large Hadron Collider (in session "M2OrA - Superconductor Materials III: Nb3Sn")

Review of failure rate input parameters to risk analysis of cryogenic systems (in session "C3OrH - Cryogenic Safety")

RF heat load compensation with electrical heater for XFEL accelerator - measurements at CMTB, AMTF and FLASH (in session "C3OrG - Cryogenic Instrumentation and Control Systems")

Robotic Resupply Mission III Cryogen Demonstration System Progress (in session "C3OrB - Aerospace Systems")

Safety related issues of the unexpected Argon release into the tunnel (in session "C3OrH - Cryogenic Safety")

Second stage Cooling from a PT-415 Cooler at Second-stage Temperatures up to 125 K with Heat Loads on the First-stage from 0 to 60 W (in session "C1OrA - Cryocoolers for Superconducting Applications")

Second-Law Analysis of a Cascade Joule-Thomson Microcooler (in session "C2PoJ - Joule-Thomson Coolers")

Series Supply of Cryogenic Venturi Tube Flowmeters for the ITER Project (in session "C3OrG - Cryogenic Instrumentation and Control Systems")

Shift of the Fp-B curve peak of Nb3Sn conductors with very fine grain sizes (in session "M2OrA - Superconductor Materials III: Nb3Sn")

Significant Enhancement of Bc2 at 20-25 K for MgB2 Thin Films via Controlled oxygen doping (in session "M3OrA - Superconductor Wires III: Thin Films")

Simulated Propellant Loading System: Testbed for Cryogenic Component and Control Systems Research & Development (in session "C2OrG - Hydrogen and Other Systems")

Single-phase ambient and cryogenic temperature heat transfer coefficients in microchannels (in session "C1OrB - Cryogenic Heat Transfer")

Single-strand excitation for examining current sharing and ICR in Nb3Sn Rutherford Cable at 4.2K up to 15 Tesla (in session "M1PoA - Superconducting Materials and Applications")

SOFI/Substrate Integrity Testing for Cryogenic Propellant Tanks (in session "M1OrB - Cryogenic Materials I: Testing and Methods")

Solid-cryogen-stabilized, cable-in-conduit superconductor cables (in session "C2PoN - Cryogenic Power Cables and Leads II")

Spallation Target Cryogenic Cooling Design Challenges at The European Spallation Source (in session "C2OrG - Hydrogen and Other Systems")

Stainless Steel to Titanium Bimetallic Transitions (in session "C1OrG - Superconducting RF Systems I")

Status and commissioning results of the helium refrigerator plant for the European XFEL (in session "C3OrE - Operating Experience II")

Status of ITER thermal shield development (in session "C1PoG - Thermal Analysis and Design")

Structure and properties of oxygen-containing thin MgB2 films (in session "M3OrA - Superconductor Wires III: Thin Films")

Study for cryogenic testing the Super-FRS magnets of FAIR in a new test facility at CERN (in session "C2PoF - Test Facilities")

Study of He II Boiling Flow Field around a Heater (in session "C3OrJ - Special Session: Helium II Properties and Systems")

Study of Thermocurrents in SCRF cavities via measurements of the Seebeck Effect in niobium, titanium, and stainless steel thermocouples (in session "M2PoD - Cryogenic Materials IV: Physical Properties")

Study on A Cascade Pulse Tube Cooler with Energy Recovery: New Method for Approaching Carnot (in session "C4OrB - Pulse Tube Configurations")

Subsea Superconducting Power Cables for Offshore Renewable Energy Integration (in session "M1OrA - Superconductor Cables I: HTS and LTS")

Superconducting characteristics of MgB2 short wires of long level sensor for liquid hydrogen (in session "C3OrG - Cryogenic Instrumentation and Control Systems")

Superconducting Turboelectric Distributed Aircraft Propulsion (in session "M3PL - ICMC Plenary Session - sponsored by the IEEE Council on Superconductivity")

Suppression of magnetization and creep in Bi2212 strands (in session "M3OrC - Superconductor Wires V: BSCCO Processing and Properties")

Suppression of persistent-current magnetization of Nb3Sn strands by transport current (in session "M2PoA - Superconductors Materials II: Nb3Sn, FeAs-based")

Synthesis of Bi2Sr2CaCu2Ox oxide precursor from nano-oxides and its relationship with multifilamentary wire transport properties (in session "M3OrC - Superconductor Wires V: BSCCO Processing and Properties")

Synthesis of Nanoscale Magnesium Diboride Powder (in session "M3OrB - Superconductor Wires IV: MgB2 and Applications")

Temperature dependence of critical current and transport current losses of 4 mm YBCO coated conductors manufactured using nonmagnetic substrate (in session "M2OrB - Superconductor Wires I: Testing and Characterization")

TENSILE AND FATIGUE QUALIFICATION TESTING of ITER-CS CONDUIT ALLOY JK2LB (in session "M2OrD - Cryogenic Materials V: Structural Materials")

Tensile properties and conductivities of a precipitation hardened and cold-rolled Cu-0.3Cr-0.1Zr alloy at cryogenic temperature (in session "M2OrD - Cryogenic Materials V: Structural Materials")

Tensile strengths of polyamide based 3D printed polymers in liquid nitrogen (in session "M3PoB - Cryogenic Materials VI: Insulation")

Test of heat load smoothing strategies for the ITER Toroidal Field coils by means of Artificial Neural Networks (in session "C3OrF - Superconducting Magnets Cryogenic Systems II")

Test procedures and functional verification of cryogenic valves considering operating conditions (in session "C2PoC - Instrumentation and Controls I")

Test results of sorption-based helium-3 pump for a closed-cycle dilution refrigerator (in session "C1OrD - Low Temperature Aerospace Cryocoolers")

Test stand for routine thermal conductivity measurements of SRF cavity material. (in session "C2PoD - Superconducting RF Systems II")

Testing and analytical modeling for purging process of a cryogenic line (in session "C2PoL - Thermal Fluids (Aerospace Applications)")

Testing of a 4 K to 2 K Heat Exchanger with an Intermediate Pressure Drop (in session "C2PoG - Heat Exchangers")

Testing of a sub-scale HTS coil for wind turbine generator (in session "C2OrF - Superconducting Magnets II")

Testing of Full-Scale Prototype Cryoviscous Compressor at SNS for ITER Vacuum System (in session "C1OrC - Compressors & Expanders")

The Cost of Coolers for Cooling Superconducting Devices from 4.2 to 4.7 K, from 20 to 30 K, and from 65 to 80 K (in session "C1OrA - Cryocoolers for Superconducting Applications")

The Development of Persistent joints for MgB2 Conductors (in session "M2OrB - Superconductor Wires I: Testing and Characterization")

The Evolution of the Cryogenic System of the European Spallation Source (in session "C2OrE - Cryogenic Systems II")

The Fermilab Muon Campus g-2 Cryogenic Distribution Remote Control System (in session "C3PoB - Cryo Controls")

The hydrogen circulation cold box of CSNS cryogenic system (in session "C2PoH - Hydrogen Systems")

The Mechanical and material properties of 316LN austenitic stainless steel for the fusion application in cryogenic temperatures (in session "M2OrD - Cryogenic Materials V: Structural Materials")

The process design of the forced-flow cooled for CFETR CS model coil (in session "C4OrC - Cryogenic Systems and Facilities")

The Role of Cryogenics in the U.S. Hydrogen Bomb Program and Vise Versa (in session "C2PL - Tuesday CEC Plenary Session - sponsored by Cryomech, Inc.")

THE SAFE REMOVAL OF FROZEN AIR FROM THE ANNULUS OF AN LH2 STORAGE TANK (in session "C1PoB - Intermediate Temperature Systems")

Theoretical analysis and experimental investigation on performance of the thermal shield of accelerator cryomodules by thermo-siphon cooling of liquid nitrogen. (in session "C2OrC - Pulsating Heat Pipes and Thermosyphons")

Theoretical and experimental investigations on impedance of pulse tube cold fingers to match with linear compressors (in session "C1PoH - Aerospace Cryocoolers Analysis and Experimentation")

Theoretical and experimental investigations on the performance characteristics of the linear compressor for the pulse tube cryocooler (in session "C2PoB - Stirling and Pulse Tube Cryocoolers")

Theoretical research of helium pulsating heat pipe under steady state (in session "C1PoJ - Novel Concepts and New Devices I")

Thermal Analysis of Superconducting Undulator (SCU) Cryomodules (in session "C3PoD - Superconducting Magnets Cryogenic Systems I")

Thermal analysis of the cold mass of the 2 T solenoid for the PANDA detector at FAIR (in session "C3OrF - Superconducting Magnets Cryogenic Systems II")

Thermal and mechanical properties of impregnation materials for HTS cables and coils (in session "M3PoB - Cryogenic Materials VI: Insulation")

Thermal and mechanical properties of selected 3D printed thermoplastics in the cryogenic temperature regime (in session "M3PoB - Cryogenic Materials VI: Insulation")

Thermal Contraction of Electrical Insulators (in session "M1OrB - Cryogenic Materials I: Testing and Methods")

Thermal Design and Performance results of the first High Beta Cryomodule for HIE-ISOLDE at CERN (in session "C1PoG - Thermal Analysis and Design")

Thermal Performance Testing of Cryogenic Multilayer Insulation with Silk Net Spacers (in session "C1OrF - Thermal Insulation Applications and Measurements")

Thermal-hydraulic analysis of transients in the HELIOS loop including a CICC section (in session "C3PoD - Superconducting Magnets Cryogenic Systems I")

Thermo-physical performance prediction of the KSC Ground Operation Demonstration Unit for liquid hydrogen (in session "C2PoH - Hydrogen Systems")

Thermodynamic analysis of a intermediate cooled heat exchanger working in high temperature ratio for Joule-Thomson cooler (in session "C3OrK - Special Session: JT Coolers")

Thermodynamic optimization of mixed refrigerant Joule Thomson systems constrained by heat transfer considerations (in session "C3OrC - Mixed Gases")

Time resolved cryogenic cooling analysis of the Cornell Injector Cryomodule (in session "C1PoE - Thermal Fluids (Non-Aerospace)")

Total Hydrocarbon Accumulation in Liquid Oxygen Storage Systems (in session "C2OrG - Hydrogen and Other Systems")

TRANSIENT ANALYSIS OF SINGLE STAGE GM TYPE DOUBLE INLET PULSE TUBE CRYOCOOLER (in session "C1PoC - Vuilleumier Cryocoolers and Cooler Analyses")

Transient heat transfer from a wire to a forced flow of subcooled liquid hydrogen passing through a vertically-mounted pipe (in session "C3PoC - Convective Heat Transfer")

Transport testing of MgB2 and Nb3Sn solenoid coils for magnet applications (in session "C1PoK - Superconducting Magnets I")

Transverse, axial and torsional strain tests on REBCO tapes as a basis for CORC modeling (in session "M2OrC - Superconductor Wires II: Coated Conductors and Applications")

Two-stage pulse tube refrigerator with step displacer as phase shifter (in session "C4OrB - Pulse Tube Configurations")

ULTRA-FLEXIBLE THERMAL BUS FOR USE IN THE ASTRO-H ADIABATIC DEMAGNETIZATION REFRIGERATOR (in session "C1OrB - Cryogenic Heat Transfer")

UPS LNG Use & Future Intended Use (in session "C4PL - CEC Plenary Session")

Using In-situ Cryogenic Radiometers to Measure the Performance of a Large Thermal Vacuum Chamber (in session "C3OrB - Aerospace Systems")

Value Engineering in System of Cryoline and Cryodistribution for ITER: In-kind Contribution from India (in session "C1PoD - Cryogenic Distribution Systems")

Visual investigation of solid-liquid phase equilibria for non-flammable mixed refrigerant (in session "C2PoP - Mixed-Gas Properties")

Include materials from selected contributions

Events scheduled on*

6/28/15

6/29/15

6/30/15

7/1/15

7/2/15

Include materials from sessions/contributions scheduled on the selected dates