CEC-ICMC 2015 - Timetable, Abstracts and Presentations

Name: CEC-ICMC 2015 - Timetable, Abstracts and Presentations
Start: 2015-06-28T08:00:00+07:00
End: 2015-07-02T13:00:00+07:00
Location: JW Marriott Starr Pass Resort

28 June 2015 to 2 July 2015

JW Marriott Starr Pass Resort

Etc/GMT-7 timezone

Support

Speaker List

Patrick Adam (Washington State University)
- Speaker at Design and performance of a 3D printed liquid hydrogen tank with vapor cooled shielding for use in unmanned aerial vehicles
El Hadj AILAM (Univ Khemis Miliana, LESI Lab.)
- Speaker at Design and tests of a new kind superconducting motor
Nathaniel Allen (Tufts University)
- Speaker at Numerical and Experimental Investigation of the Electromechanical Behavior of REBCO Tapes and Cables
Naoyuki Amemiya (Kyoto University)
- Speaker at Electromagnetic behavior of striated coated conductors wound into pancake coils
Jérôme ANDRE (CEA-SBT, 17 rue des Martyrs, 38054 Grenoble Cedex 9, France)
- Speaker at Series Supply of Cryogenic Venturi Tube Flowmeters for the ITER Project
Ryosuke Arai (Environment and Energy Materials Division, National Institute for Materials Science)
- Speaker at Estimation of magnetocaloric properties by using Monte Carlo method for AMRR cycle
P M Ardhapurkar (SSGMCE Shegaon, India)
- Speaker at Prediction of two-phase pressure drop in heat exchanger for mixed refrigerant Joule–Thomson cryocooler
Michael Armstrong (Rolls-Royce North American Technologies Inc)
- Speaker at Superconducting Turboelectric Distributed Aircraft Propulsion
Jordan Armstrong (Glacier Technical Solutions, Air Force Research Laboratory)
- Speaker at Air Force Research Laboratory Spacecraft Cryocooler Endurance Evaluation Final Report
Philipp Arnold (European Spallation Source ESS AB)
- Speaker at [Invited] ESS Cryogenic System Process Design
Milind Atrey (Indian Institute of Technology Bombay)
- Speaker at Performance analysis of a miniature Joule-Thomson cryocooler with and without the distributed J-T effect
- Speaker at Prediction of two-phase pressure drop in heat exchanger for mixed refrigerant Joule–Thomson cryocooler
Paulo Augusto (APLICAMA Research Group - Univ Salamanca - SPAIN)
- Speaker at AC LOSSES MODELS FOR LOW-TC SUPERCONDUCTORS
- Speaker at DESIGNING VAPOUR-COOLED AND FORCED-FLOW COOLED CURRENT LEADS FOR A NEW SEPARATING DEVICE
Nadezda Bagrets (Karlsruhe Institute of Technology – KIT)
- Speaker at Thermal and mechanical properties of impregnation materials for HTS cables and coils
JONG BAIK (FLORIDA SOLAR ENERGY CENTER)
- Speaker at Thermo-physical performance prediction of the KSC Ground Operation Demonstration Unit for liquid hydrogen
Shreyas Balachandran (Texas A&M University)
- Speaker at Progress on fabricating seamless RRR Nb tubes for SRF applications
Qian Bao (Sumitomo Heavy Industries, Ltd.)
- Speaker at Recent development status of compact 2K GM cryocoolers
SHRIDHAR BAPAT (Department of Mechanical Engineering, Indian Institute of Technology Bombay)
- Speaker at Effect of operating frequency and phase angle on performance of Alpha Stirling cryocooler driven by a novel compact mechanism
- Speaker at Experimental comparison of Pressure ratio in Alpha and Gamma Stirling cryocoolers with identical compression space volumes and driven simultaneously by a solitary novel compact mechanism
- Speaker at Reduction in variation in refrigeration temperature for a sorption compressor based J-T cooler
Rodrigo Barraza (University of Wisconsin-Madison)
- Speaker at Description and validation of the Little correlation for boiling zeotropic mixtures in horizontal tubes from cryogenic to room temperature
Jorge Barreto (LIBPhys-UNL, Departamento de Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa)
- Speaker at Gas gap heat switch for a Cryogen-free magnet system
Matt Barrios
- Speaker at Helium Recovery at the National High Magnetic Field Laboratory
Bertrand Baudouy (CEA Saclay)
- Speaker at Astro-particle shielding superconducting magnet cryogenic design for space travel missions
Pierre Bauer (ITER Organization)
- Speaker at Modelling and Testing of Fin-type Heat Exchangers for the ITER Current Leads
Nilotpala Bej (Indian Institute of Technology, Kharagpur)
- Speaker at CFD study on the effects of viscous shear in a hot cascade Ranque-Hilsch vortex tube
Frederick Berg (Airbus Group)
- Speaker at Cryogenic system options for a superconducting aircraft propulsion system
Yannick Bessler (Forschungszentrum Jülich)
- Speaker at Liquid hydrogen Moderator optimization for Neutron Sources with high brilliance
Lars Blum (Linde Kryotechnik AG)
- Speaker at Status and commissioning results of the helium refrigerator plant for the European XFEL
Torsten Boeckmann (DESY)
- Speaker at Design of the control system for the cryogenic distribution systems of the European XFEL project
Michael Boersch (WEKA AG)
- Speaker at Test procedures and functional verification of cryogenic valves considering operating conditions
Guram Bokuchava (Sokhumi Ilia Vekua Institute of Physics and Technology)
- Speaker at Obatining of Massive MgB2 superconductor
François BONNE (CEA/SBT)
- Speaker at A Simulink Library of cryogenic components to automatically generate control schemes for large Cryorefrigerators.
Patrícia Borges de Sousa (LIBPhys, Physics Department, Faculty of Sciences and Technology, Universidade Nova de Lisboa)
- Speaker at 15 K LIQUID HYDROGEN THERMAL ENERGY STORAGE UNIT FOR FUTURE ESA SCIENCE MISSIONS
- Speaker at Contribution to the study of neon-nitrogen mixtures at low temperatures
Robert Boyle (NASA)
- Speaker at Robotic Resupply Mission III Cryogen Demonstration System Progress
Peter Bradley (NIST)
- Speaker at Single-phase ambient and cryogenic temperature heat transfer coefficients in microchannels
Johan Bremer (CERN)
- Speaker at Development of cryogenic installations for large liquid argon based neutrino detectors
Flavio Brighenti (Karlsruhe Institute of Technology)
- Speaker at A conceptual study on the use of a regenerator in a hybrid energy storage unit (LIQHYSMES)
Michael Britt (UPS)
- Speaker at UPS LNG Use & Future Intended Use
Leslie Bromberg (MIT - Plasma Science and Fusion Center)
- Speaker at Cooling topology options for HTS rotating superconducting machinery
- Speaker at Solid-cryogen-stabilized, cable-in-conduit superconductor cables
Michael Brown (Florida State University)
- Speaker at Digital evaluation of filament distortion and RRR degradation in drawn and rolled PIT and RRP® Nb3Sn wires
romain bruce (CEA Saclay)
- Speaker at Implementation of the thermodynamic and phase transition equations of superfluid helium in a CFD software
James Butterworth (Air Liquide Advanced Technologies)
- Speaker at Performance Testing of a 15K Pulse Tube Cooler for Space Applications
Edgar Canavan (NASA–Goddard Space Flight Center)
- Speaker at Conductance Degradation in HTS Coated Conductor Solder Joints
Haishan Cao (University of Twente)
- Speaker at New developments in Joule Thomson microcooling at the University of Twente
David Cardwell (University of Cambridge)
- Speaker at [Invited] The Processing of Bulk, Melt Processed (RE)BCO Superconductors with World Record Fields
Isabel Catarino (LIBPhys-UNL, Departamento de Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa)
- Speaker at Gas gap heat switch for a Cryogen-free magnet system
- Speaker at Materials for damping the PTC-induced thermal fluctuations of the cold-head
Alan Caughley (Callaghan Innovation)
- Speaker at Commercialisation of pulse tube cryocoolers to produce 330 W and 1000 W at 77 K for liquefaction.
Jorge Ceballos Velasco (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Speaker at Development of integrated superconducting Quadrupole Doublet Modules for operation in the SIS100 Accelerator
Patrick Champagne (Lockheed Martin)
- Speaker at Lockheed Martin Joule-Thomson Compressor Development
Ho-Myung Chang (Hong Ik University)
- Speaker at Progress in Development of a 10 kW Brayton Cryocooler for HTS Cable in Korea
Roin Chedia (Sokhumi Ilia Vekua Institute of Physics and Technology)
- Speaker at Obatining of Massive MgB2 superconductor
Houlei Chen (TIPC, Beijing China)
- Speaker at Investigation on the cold finger and compressor of a miniature pulse tube cryocooler
Liubiao Chen (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS)
- Speaker at A cryogenic tensile testing apparatus for micro-samples cooled by miniature pulse tube cryocooler
- Speaker at An Investigation on A New Structure of Stirling Type Two-stage Pulse Tube Cryocooler
- Speaker at An investigation on the Application of ErPr Packed Sphere Matrix in Stirling Type Pulse Tube Cryocooler
- Speaker at Numerical studies on the phase adjustment systems of high frequency pulse tube cryocooler with a gradient temperature distribution
KANCHAN CHOWDHURY (Cryogenic Engineering Centre, Indian Institute of Technology)
- Speaker at Exergy analysis of LNG boil-off gas reliquefaction systems
Yin Chuanlin (Institute of Cryogenics and Electronics)
- Speaker at CFD Simulation of the Gas Flow in a Pulse Tube Cooler with two Pulse Tubes
Ted Collings (MSE, OSU)
- Speaker at Calorimetrically Measured Interstrand Contact Resistances and Coupling Magnetizations in Cored QXF-Type Nb3Sn Rutherford Cables for the LHC Quadrupole Upgrade
Ted Conrad (Raytheon)
- Speaker at Raytheon Advanced Miniature Cryocooler Characterization Testing
Zachary Conway (Argonne National Laboratory)
- Speaker at A new 2 K superconducting half-wave cavity cryomodule for PIP-II
Lance Cooley (Fermilab)
- Speaker at Requirements for quadrupole magnet conductor for the United States contribution to the high-luminosity upgrade of the Large Hadron Collider
Victoria Cooley (University of Wisconsin-Madison)
- Speaker at Study of Thermocurrents in SCRF cavities via measurements of the Seebeck Effect in niobium, titanium, and stainless steel thermocouples
Scott Courts (Lake Shore Cryotronics, Inc.)
- Speaker at Mechanical Robustness of Cryogenic Temperature Sensors Packaged in a Flat, Hermetically-Sealed Package
Simon CRISPEL (AIR LIQUIDE)
- Speaker at Cryogenic System for Turkish Accelerator Center
Wei Dai (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at Advances on a free piston Stirling cryocooler with a large cooling capacity at 80 K
Rashmin Damle (IIT Bombay)
- Speaker at Performance analysis of a miniature Joule-Thomson cryocooler with and without the distributed J-T effect
Annett D'Antonio (Centennial Conferences)
- Speaker at Test Presentation for Upload My Talk or Poster Material
Tripti Sekhar Datta (Inter- University Accelerator Centre. New Delhi. India)
- Speaker at Performance analysis of cryogenic system and cryomodules for the complete superconducting linear accelerator at IUAC, New Delhi.
- Speaker at Theoretical analysis and experimental investigation on performance of the thermal shield of accelerator cryomodules by thermo-siphon cooling of liquid nitrogen.
Lutz Decker (Linde Kryotechnik AG)
- Speaker at Design of cold compressor systems in terms of operational and economical aspects
Brian DeGraff (ORNL)
- Speaker at Commissioning and Operation of the Horizontal Test Apparatus at SNS
- Speaker at Liquid Nitrogen Historical and Current Usage of the Central Helium Liquefier at SNS
Ronald Dekker (Demaco)
- Speaker at European XFEL-linac Feed and End cap dimensional tolerance validation
C. Hudson DeLee (NASA GSFC)
- Speaker at Robotic Resupply Mission III Cryogen Demonstration System Progress
Antonio Della corte (ENEA- C.R. Frascati, Italy)
- Speaker at Design and manufacture of the large-bore 8T superconducting solenoid for the NAFASSY test facility
Nicolas Delruelle (CERN)
- Speaker at Commissioning of the helium cryogenic system for the HIE-ISOLDE accelerator upgrade at CERN
Jonathan Demko (LeTourneau University)
- Speaker at Comparison tests of cellular glass insulation for the development of cryogenic insulation standards
Haoren DENG (Zhejiang University)
- Speaker at Experimental investigation of a Hydrogen Pulsating Heat Pipe
Jan Hendrik Derking (CERN)
- Speaker at Study for cryogenic testing the Super-FRS magnets of FAIR in a new test facility at CERN
Alphons de Waele (Oswald Elektromotoren GmbH)
- Speaker at Capillary cooling of superconducting coils
Nandhini Dhanaraj (Fermi National Accelerator Laboratory)
- Speaker at An Analytical Approach to Designing a Thermosiphon Cooling System for Large Scale Superconducting Magnets
Aman Kumar Dhillon (Indian Institute of Technology, Kharagpur)
- Speaker at CFD analysis of straight and flared vortex tube
Ram Dhuley (Florida State University)
- Speaker at Flow of nitrogen gas in a liquid helium cooled vacuum tube: Condensation heat transfer
Michael DiPirro (NASA/Goddard Space Flight Center)
- Speaker at Using In-situ Cryogenic Radiometers to Measure the Performance of a Large Thermal Vacuum Chamber
Nico Dittmar (Technische Universitaet Dresden)
- Speaker at Operating parameters of liquid helium transfer lines used with continuous flow cryostats at low sample temperatures
Kelly Dixon (Jefferson Lab)
- Speaker at FRIB Cryogenic Plant Status
Christopher Dodson (Air Force research labs)
- Speaker at Computational Fluid Dynamic Investigation of Loss Mechanisms in a Pulse-Tube Refrigerator
- Speaker at Modeling Thermal Parasitic Load Lines for an Optical Refrigerator
- Speaker at Second-Law Analysis of a Cascade Joule-Thomson Microcooler
Robert Duckworth (Oak Ridge National Laboratory)
- Speaker at Cryogenic Considerations for Superconducting Magnet Design for the Material Plasma Exposure eXperiment
- Speaker at Testing of Full-Scale Prototype Cryoviscous Compressor at SNS for ITER Vacuum System
Laetitia Dufay-Chanat (CERN)
- Speaker at Final Report on the Controlled Cold Helium Spill Test in the LHC Tunnel at CERN
Raluca Dumitrescu (Eindhoven University of Technology)
- Speaker at Molecular dynamics for homogeneous nucleation of water and carbon dioxide in different carrier gases
John Durrell (University of Cambridge)
- Speaker at Bulk Superconducting Materials – Ready for Applications?
Jean-Marc duval (CEA)
- Speaker at Qualification campaign of the 50 mK sorption-ADR cooler for SPICA/SAFARI
Ralf Eichhorn (Cornell University)
- Speaker at Cryogenic parallel, single phase flows: an analytical approach
- Speaker at Design of a symmetric coupler for superconducting elliptical cavities.
- Speaker at First results from the Cornell high Q cw full linac cryo-module
- Speaker at Time resolved cryogenic cooling analysis of the Cornell Injector Cryomodule
Thomas Eisel (GSI)
- Speaker at Local Cryogenics for the SIS100 at FAIR
HASSAN EL IDRISSI (UNIVERSITE HASSAN II CASABLANCA MAROC)
- Speaker at Study of a percolation transition in a dilute two dimensional hole gas at low temperature in GaAs/AlGaAs
Abdelhamid El kaaouachi (University Ibn Zorh Faculty of sciences, Agadir, Morocco)
- Speaker at The study of metal-insulator transition at very low temperature in p-type 70Ge:Ga semiconductor by applying the scaling laws
- Speaker at Metal Insulator Transition due to Density inhomogeneity at very low temperature and evidence for the correlated hopping mechanism in absence of magnetic field in p-GaAs
Nick Emery (Callaghan Innovation)
- Speaker at 330 W Cryocooler Developments and Testing
Pascal Erni (WEKA AG)
- Speaker at Test procedures and functional verification of cryogenic valves considering operating conditions
Yannick FABRE (AIR LIQUIDE Advanced Technologies)
- Speaker at ITER: Test protocol to demonstrate the Cryogenic Helium plant performances
Guochao Feng (Technical Institute of Physics and Chemistry of Chinese Academy of Science)
- Speaker at Numerical Simulation of Heat Transfer for Wall-type and Fin-type Heat Exchanger
carlo ferdeghini (CNR)
- Speaker at [Invited] LOW TEMPERATURE- HIGH FIELD PERFORMANCES OF IRON CALCHOGENIDES THIN FILMS
Gerard Ferlin (CERN)
- Speaker at 5-year operation experience with the 1.8 K refrigeration units of the LHC cryogenic system
James Fesmire (NASA)
- Speaker at Cylindrical Boiloff Calorimeters for Testing of Thermal Insulation Systems
- Speaker at Flat Plate Boiloff Calorimeters for Testing of Thermal Insulation Systems
Douglas Finnemore (Ames Laboratory, Iowa State University)
- Speaker at Synthesis of Nanoscale Magnesium Diboride Powder
David Foley (Shear Form, Inc.)
- Speaker at Highly Formable Tantalum Barrier for Nb3Sn Conductors
Luis Fonseca (University of Wisconsin Madison)
- Speaker at Design and Operation of a Cryogenic Nitrogen Pulsating Heat Pipe
Thomas Fraser (air force research labs)
- Speaker at Modeling Thermal Parasitic Load Lines for an Optical Refrigerator
- Speaker at Second-Law Analysis of a Cascade Joule-Thomson Microcooler
Bao Fu (Institute of Plasma Physics, China Academy of Sciences)
- Speaker at The Designing and Testing of All Gas Bearing Helium Turbine of EAST Cryogenic System
Hidehito Fukuda (Environment and Energy Materials Division, National Institute for Materials Science)
- Speaker at Properties of two stage Adiabatic Demagnetization Refrigerator
Thomas Funke (Technische Universitaet Dresden)
- Speaker at New measurements of multilayer insulation at variable cold temperature and elevated residual gas pressures
Hernan Furci (CEA Saclay)
- Speaker at Experimental study of stability and transients in a horizontally heated boiling helium thermosyphon
Ranjana Gangradey (Institute for Plasma Research, India)
- Speaker at Pumping speed studies of activated carbons at 4.2 K adhered to indigenously developed hydroformed cryopanels
Bo GAO (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at Determination of thermodynamic temperature between 4.2K and 24.5 K by a new constant pressure refractive index gas thermometer
Nathaniel Garceau (Hylium Industries Inc.)
- Speaker at Performance test of a 1 L liquid hydrogen fuel tank for unmanned aerial vehicles.
Cedric Garion (CERN)
- Speaker at Material characterisation and preliminary mechanical design for the HL-LHC shielded beam screens operating at cryogenic temperatures.
Parthasarathi Ghosh (Indian Institute of Technology, Kharagpur, India)
- Speaker at Exergy analysis of LNG boil-off gas reliquefaction systems
- Speaker at Influence of thermophysical properties of working fluid on the design of cryogenic turboexpanders using ns-ds diagram
- Speaker at Predicting performance of axial pump of lox booster turbopump of staged combustion cycle based rocket engine using CFD
Sundeep Ghosh (Variable Energy Cyclotron Centre)
- Speaker at Comparison of coil cooling techniques for a 25 MeV compact superconducting cyclotron
Alain Girard (CEA)
- Speaker at Cryogenic turbulence test facilities at CEA/SBT
Cecile Gondrand (Air Liquide Advanced Technologies)
- Speaker at Air Liquide latest developments of turbomachines : from design to commissioning
Linghui Gong (Technical Institute of Physics and Chemistry, CAS)
- Speaker at Helium extraction and nitrogen removal from LNG boil-off gas
- Speaker at Numerical Simulation of Heat Transfer for Wall-type and Fin-type Heat Exchanger
Lukas Graber (Florida State University)
- Speaker at Dielectric Properties of Cryogenic Gas Mixtures Containing Helium, Neon, and Hydrogen
Michael Green (Michigan State University)
- Speaker at Lessons learned concerning the Cool-down of Superconducting Magnets using a Thermal Siphon Cooling-loop
- Speaker at Second stage Cooling from a PT-415 Cooler at Second-stage Temperatures up to 125 K with Heat Loads on the First-stage from 0 to 60 W
- Speaker at The Cost of Coolers for Cooling Superconducting Devices from 4.2 to 4.7 K, from 20 to 30 K, and from 65 to 80 K
Francesco Grilli (Karlsruhe Institute of Technology)
- Speaker at Modelling AC ripples in HTS coated conductors
David Grillot (Air liquide)
- Speaker at Helium Sourcing ... Calmer seas ahead ?
Valery Grishin (ANU)
- Speaker at Josephson generation of coherent THz stimulated emission on Planar Multilayer Superconducting Lattice (PMSL)
Kaixuan Gu (Key Laboratory of Cryogenics, TIPC, Chinese Academy of Sciences, Beijing 100190, China)
- Speaker at The effect of cryogenic treatment on the room and cryogenic properties of 9Ni steel
- Speaker at A cryogenic tensile testing apparatus for micro-samples cooled by miniature pulse tube cryocooler
Jens Haenisch (Karlsruhe Institute for Technology)
- Speaker at Large Jc enhancement and matching effects by Ba2Y(Nb/Ta)O6 nanocolumns in YBa2Cu3O7-x thin films
Xihuan Hao (Advanced Research Systems, Inc.)
- Speaker at Design of an improved high-cooling-power 4.2 K stage G-M cryocooler and helium compressor
Kiruba Haran (University of Illinois)
- Speaker at [Invited] High Field Superconducting Machines
Rajeev Hatwar (Florida State University)
- Speaker at Effect of Discontinuities and Penetrations on the Shielding Efficacy of High Temperature Superconducting Magnetic Shields
Timothy Haugan (U.S. Air Force Research Laboratory)
- Speaker at Impact of Cryogenic/Superconducting Components for Hybrid-Electric Aircraft Propulsion
- Speaker at Calorimetric Measurements of AC losses in HTS coils and tapes in a Stator Environment
- Speaker at Computational Investigation of Superconducting Magnetic Energy Storage (SMES) Devices to Maximize Energy Density
- Speaker at Optimizing Flux Pinning of YBa2Cu3O7-δ (YBCO) Thin Films with Unique Large Nanoparticle Size and High Concentration of Y2BaCuO5 (Y211) Additions
- Speaker at Optimizing Flux Pinning of YBCO Thin Films with BZO + Y2O3 Double-Mixed Phase Additions
Mark Haynes (Composite Technology Development)
- Speaker at SOFI/Substrate Integrity Testing for Cryogenic Propellant Tanks
Drew Hazelton (SuperPower Inc.)
- Speaker at Continuous Improvement at SuperPower of 2G HTS Wire for Demanding Applications
Tianbiao He (Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University)
- Speaker at Dynamic simulation of mixed refrigerant process for small-scale LNG plant
Ali Hedayat (NASA-MSFC)
- Speaker at Testing and analytical modeling for purging process of a cryogenic line
Wolfgang Hees (European Spallation Source ESS AB)
- Speaker at The Evolution of the Cryogenic System of the European Spallation Source
Carolin Heidt (Karlsruhe Institute of Technology (KIT))
- Speaker at Commissioning of the Cryogenic Safety Test Facility PICARD
Eric Hellstrom (Applied Superconductivity Center, National High Magnetic Field Laboratory, Florida State University)
- Speaker at [Invited] Advances in Overpressure Processing Bi-2212 Insert Coils in a New, Large Overpressure Furnace
Jamal Hemine (Université Hassan II – Mohammedia, Faculté des Sciences Ben M’sik, Avenue Colonel Driss El Harti, B.P.7955, Sidi Othman, Casablanca, Morocco)
- Speaker at Metal Insulator Transition due to Density inhomogeneity at very low temperature and evidence for the correlated hopping mechanism in absence of magnetic field in p-GaAs
daisuke Higa (Kyoto university)
- Speaker at Forced flow heat transfer from a round wire in a vertically-mounted pipe to supercritical hydrogen
Jan Hildenbeutel (Linde Kryotechnik AG)
- Speaker at Cryogenic infrastructure supplied by Linde Kryotechnik AG for the Series Magnet Test Facility for FAIR
Jacob Hinze (University of Wisconsin-Madison)
- Speaker at Thermodynamic optimization of mixed refrigerant Joule Thomson systems constrained by heat transfer considerations
Hirokazu Hirai (Taiyo Nippon Sanso Corporation)
- Speaker at Commercialization of a Turbo-Brayton cycle refrigerator for HTS power applications
YOSHIKATSU HIRATSUKA (Technology Research Center, Sumitomo Heavy Industries, Ltd.)
- Speaker at Development of linear compressor for compact 2K Gifford-McMahon cryocoolers
Christine Hoa (CEA SBT)
- Speaker at Experimental characterization of the ITER TF structure cooling in HELIOS test facility
Jens Höhne (Pressure Wave Systems GmbH)
- Speaker at Development of an oil-free compressor for GM and pulse tube cryocoolers
Yong-Ju Hong Hong (Korea Institute of Machinery & Materials)
- Speaker at Performance Test of the Cryogenic Cooling System for the Superconducting Fault Current Limiter
Matthew Howell (UT Battelle/ORNL)
- Speaker at 2K Pump Down Studies at SNS
- Speaker at Cryogenic System Operating Experience at SNS
Liangbing Hu (Institute of Plasma Physics,Chinese Academy of Sciences)
- Speaker at Design, Development and Application of Automatic Control Strategies for a 500W@4.5K Helium Refrigerator/Liquefier
Lei Hu (Institute of electrical engineering chinese academy of science)
- Speaker at The structural design of composite flywheel
Rongjin Huang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, P.R. China)
- Speaker at Low-temperature negative thermal expansion in Al doped La(Fe,Si)13 compounds
- Speaker at Relationship between the Thermal Expansion and Spontaneous Magnetization in LaFe13-xAlx (1.2≤x≤1.8) Rare Earth Intermetallic Compounds
Taihe Huang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at The experimental research and analysis about the influences of thermal coupling between the pulse tube and regenerator in PTCs
- Speaker at The researches of the thermodynamic cycle in the cold end of the UPTCs through CFD simulation
Chen Huang (Zhejiang University)
- Speaker at Effect of DC flow on a three-stage Stirling pulse tube cryocooler working at liquid helium temperatures
Artur Iluk (Technical University of Wroclaw)
- Speaker at Numerical and experimental verification of physical blast thermodynamic model
Masataka Iwakuma (Kyushu University)
- Speaker at Development of a cooling system for 66/6.9kV-20MVA REBCO superconducting transformers with a Ne turbo-Brayton refrigerator and subcooled liquid nitrogen
Natia Jalagonia (Sokhumi Ilia Vekua Institute of Physics and Technology)
- Speaker at Obatining of Massive MgB2 superconductor
Andreas Janzen (Karlsruhe Institute of Technology, Institute for Technical Thermodynamics and Refrigeration)
- Speaker at First helium measurements with a new cryogenic flow meter
Wesley Johnson
- Speaker at Demonstration of Hybrid Multilayer Insulation for Fixed Thickness Applications
- Speaker at Thermal Performance Testing of Cryogenic Multilayer Insulation with Silk Net Spacers
John Jurns (European Spallation Source ESS AB)
- Speaker at Spallation Target Cryogenic Cooling Design Challenges at The European Spallation Source
- Speaker at Design challenges of a 20kW liquid hydrogen cooling system for The European Spallation Source cold moderators.
Amir Kajbafvala (Materials Science Center, University of Wisconsin-Eau Claire)
- Speaker at Mechanical behavior of Bi2Sr2CaCu2O8+x wire with a detailed study of sample preparation techniques
Joshua Kaluzny (Fermilab)
- Speaker at Stainless Steel to Titanium Bimetallic Transitions
Soumen Kar (Inter-University Accelerator Centre)
- Speaker at Quench Characteristics of Conduction-cooled 6T NbTi Magnet System
Anna Kario (Karlsruhe Institute of Technology, Institute for Technical Physics)
- Speaker at [Invited] Effectiveness of laser striation for AC loss reduction in SuperOx coated conductor.
Haran Karmaker (TECO Westinghouse)
- Speaker at [Invited] Cost Comparison Studies of Different Superconductors for a Direct Drive Wind Generator
Sarng Woo Karng (Korea Institute of Science and Technology)
- Speaker at Performance of Cryogenic Thermal Insulation Materials under Liquid Hydrogen Environment
Ali Kashani (Millennium Engineering & Integration Company)
- Speaker at Optimization of Cryogenic Chilldown and Loading Operation Using SINDA/FLUINT
Vadim Kashikhin (Fermilab)
- Speaker at Magnetic and Structural Design of a 15 T Nb3Sn Accelerator Dipole Model
Joshua Kellams (Texas A&M University)
- Speaker at Nanoparticle Ag-enhanced textured-powder Bi-2212/Ag wire technology
Jacob Kephart (Navy)
- Speaker at Liquid Nitrogen Spray Cooling for Superconducting Power Cable
Ibrahim Kesgin (Argonne National Laboratory)
- Speaker at Design of a REBCO HTS Superconducting Undulator
Heetae Kim (Institute for Basic Science)
- Speaker at Effective temperature of cryogenic liquid in arbitrary dimension
WooKang Kim (IBS)
- Speaker at Thermal load and assembly for QWR, HWR, SSR1 and SSR2
Hyun Sung Kim (The Ohio State University)
- Speaker at Computational and experimental investigation of hydroformed niobium tubes for superconducting RF cavities
- Speaker at Transport testing of MgB2 and Nb3Sn solenoid coils for magnet applications
Yongsu Kim (Ametek Sunpower Inc)
- Speaker at A Study on the CryoTel® DS 1.5 Cryocooler for Higher Cooling Capacity
Kyeong Ho Kim (Korea Institute of Science and Technology)
- Speaker at Performance of Cryogenic Thermal Insulation Materials under Liquid Hydrogen Environment
Mark Kimball (NASA/Goddard Space Flight Center)
- Speaker at A thermally-conductive electrical isolator for use at ultra-low temperatures in the Astro-H Adiabatic Demagnetization Refrigerator
- Speaker at ULTRA-FLEXIBLE THERMAL BUS FOR USE IN THE ASTRO-H ADIABATIC DEMAGNETIZATION REFRIGERATOR
Carl Kirkconnell (Iris Technology)
- Speaker at Input current ripple and vibration suppression in second generation control electronics
Takanobu Kiss (Kyushu University)
- Speaker at Non-destructive characterization of local Ic variation in a long length Bi-2223 tape
Marcel Klaus (Technische Universitaet Dresden)
- Speaker at Expansion Vessel for Supercritical Hydrogen in a Spallation Neutron Source Moderator Circuit
Steffen Kloeppel (TU Dresden)
- Speaker at Neon Helium Mixtures as a Refrigerant for the FCC Beam Screen Cooling: Comparison of Cycle Design Options
Peter Knudsen (Jefferson Lab)
- Speaker at Commissioning and Operational Results of Helium Refrigeration System at JLab for the 12GeV Upgrade
- Speaker at Commissioning and Operational Results of the 12 GeV Helium Compression System at JLab
- Speaker at Testing of a 4 K to 2 K Heat Exchanger with an Intermediate Pressure Drop
Seok-Cheol Ko (Kongju National University)
- Speaker at Peak Current Limiting Properties of SFCL with Parallel Connected Coils using Two Magnetic Paths
Junseok Ko (Korea Institute of Machinery & Materials)
- Speaker at Development of 1 kW Stirling cryocooler with using linear compressor
Thomas M. Kochenburger (Karlsruhe Institute of Technology, Institute for Technical Thermodynamics and Refrigeration)
- Speaker at HTS cooling below 60 K with two-stage mixed-refrigerant cascades using low-flammability mixtures
Torsten Koettig (CERN)
- Speaker at [Invited] Study of Temperature Wave Propagation in Superfluid Helium to Cool Radio-Frequency Cavities
Holger Kollmus (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Speaker at Cryogenic Supply for the Facility for Antiproton and Ion Research
Sergey Koshelev (Fermilab)
- Speaker at Test stand for routine thermal conductivity measurements of SRF cavity material.
Chris Kovacs (The Ohio State University)
- Speaker at Single-strand excitation for examining current sharing and ICR in Nb3Sn Rutherford Cable at 4.2K up to 15 Tesla
Alexey Koveshnikov (TRIUMF)
- Speaker at ARIEL E-linac Cryogenic System: Commissioning and First Operational Experience
Angela Krenn (NASA)
- Speaker at THE SAFE REMOVAL OF FROZEN AIR FROM THE ANNULUS OF AN LH2 STORAGE TANK
Tinatin Kuchukhidze (Sokhumi Ilia Vekua Institue of Physics and Technology)
- Speaker at Obatining of Massive MgB2 superconductor
Biju Kuzhiveli (Centre for Advanced Studies in Cryogenics (CASC), Department of Mechanical Engineering, National Institute of Technology, Calicut)
- Speaker at Combined Heat Transfer Analysis for all Solid State Cryocooler
- Speaker at Comparative Study and Electromagnetic Analysis of Linear Drive System for a Stirling Cryocooler
- Speaker at Parametric Investigation of multi-mesh Regenerator of a Miniature Stirling Cryocooler
Nakano Kyousuke (Sumitomo Heavy Industries, Ltd.)
- Speaker at Development of high efficiency Stirling cryocooler for high temperature superconducting motor
Stefanie Langeslag (CERN)
- Speaker at DESIGN OF LOAD-TO-FAILURE TESTS OF HIGH-VOLTAGE ELECTRIC INSULATION BREAKS FOR ITER’S CRYOGENIC NETWORK.
- Speaker at [Invited] DESIGN AND FABRICATION OF A CRYOSTAT FOR LOW TEMPERATURE MECHANICAL TESTING FOR THE MECHANICAL AND MATERIAL’S ENGINEERING GROUP AT CERN
Nathaniel Laverdure (Jefferson Lab)
- Speaker at FRIB Cryogenic Distribution System
Cheonkyu Lee (KAIST)
- Speaker at Visual investigation of solid-liquid phase equilibria for non-flammable mixed refrigerant
Marinco Lefevere (Demaco)
- Speaker at European XFEL-linac Feed and End cap dimensional tolerance validation
Jiangtao Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at High-entropy alloys prepared by high-gravity combustion synthesis and their cryogenic properties
Qiang Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at Development of Integrated Submerged Liquid Hydrogen Pump
- Speaker at Finite-Time Thermodynamic optimization of a large-scale helium Brayton cryo-refrigerator with static gas bearing turboexpander
- Speaker at Test platform of thermal insulation performance of cryogenic transfer line
Guangze Li (The Ohio State University)
- Speaker at Kinetic Analysis of MgB2 Layer Formation in Advanced Internal Magnesium Infiltration (AIMI) Processed MgB2 wires
- Speaker at Significant Enhancement of Bc2 at 20-25 K for MgB2 Thin Films via Controlled oxygen doping
Laifeng Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at Application of plate-fin heat exchangers with different UAs for mitigating the effects of pulsed heat load
- Speaker at CFD studies on heat transfer and pressure drop characteristics of an offset strip-fin heat exchanger in helium systems
Xin Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at Investigation of activated carbon adsorption process in helium adsorption refrigerator and its effect on adsorption performance
shaopeng Li (IHEP)
- Speaker at Construction of the Cryogenic System for IHEP-ADS Injector I
- Speaker at The helium recovery and purification system of the ADS-inject I
Jinze Li (Beijing TIPC)
- Speaker at Impact of Varying Acceleration to the Performance of Stirling-Type Pulse Tube Cryocooler
Qing Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at Numerical analysis on flow characteristics and performance of partial emission cryogenic liquid hydrogen pump with different impeller types
JunJie LI (High Magnetic Field Laboratory, Chinese Academy Sciences)
- Speaker at RECENT PROGRESS OF CRYOGENIC SYSTEM FOR 40T HYBRID MAGNET
Pei Li (Fermi National Accelerator Laboratory)
- Speaker at Physical properties of material useful for predicting stability and quench propagation in high-field Bi-2212 magnets
QUAN LI (University of Edinburgh)
- Speaker at Subsea Superconducting Power Cables for Offshore Renewable Energy Integration
Hye Su Lim (Hong Ik University)
- Speaker at Proposed Thermodynamic Nomenclature of Cryogenic Refrigeration Cycles for Liquefaction of Natural Gas
Peng LIN (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at A cryocooler used for fixed point at 1.8K
Xiaogang Lin (Sumitomo Heavy Industries,Ltd.)
- Speaker at Recent Development Status of High-Capacity 4K Pulse Tube Cryocooler
Liqiang Liu (Technical Institute of Physics and Chemistry of CAS-Academia Si)
- Speaker at An Optimization Design of A 20 K Helium Cryoplant Based On the Genetic Algorithm
- Speaker at Conceptual Design of the Cryogenic System for the HL-2M System
- Speaker at Helium extraction and nitrogen removal from LNG boil-off gas
- Speaker at Study of a multi-strategy controller on a helium liquefier
Yanjie Liu (Technical Institute of Physics and Chemistry CAS)
- Speaker at Experimental Research of a Hybrid 4K J-T Cryocooler
Huiming Liu (Technical Institute of Physics and Chemistry, Chinese Academy of Science)
- Speaker at Theoretical research of helium pulsating heat pipe under steady state
Huajun Liu (Chinese Academy of Sciences)
- Speaker at Testing of EAST high-temperature superconducting current leads
Sixue Liu (Technical Institute of Physics and Chemistry,CAS)
- Speaker at Numerical studies on the phase adjustment systems of high frequency pulse tube cryocooler with a gradient temperature distribution
Jean Louis Lizon (ESO)
- Speaker at An hybride liquid nitrogen system for the cooling of focal plane detector
Dmitry Luchinsky (Mission Critical Technologies)
- Speaker at Hierarchy of Two-Phase Flow Models for Autonomous Control of Cryogenic Loading Operation
Yanwei Ma (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at [Invited] Recent advances in iron-based superconducting wires and tapes
Milan Majoros (The Ohio State University)
- Speaker at Current sharing, quench, and normal zone propagation in YBCO CORC and Roebel cables
- Speaker at Measurements of magnetization of YBCO CORC and Roebel Cables at 4.2 K
- Speaker at Measurements of YBCO pancake coils: thermal conductivity, quench, and NZP at 4.2 K and 10 T.
Ziemowit Malecha (Wroclaw University of Technology)
- Speaker at Safety related issues of the unexpected Argon release into the tunnel
Maxim Marchevsky (Lawrence Berkeley National Laboratory)
- Speaker at Development of tools for advanced quench diagnostics at LBNL Magnet Test Facility
Jennifer Marquardt (Ball)
- Speaker at An overview of Ball cryogen storage and delivery dewar systems
Kyle Martin (Applied Technology Associates)
- Speaker at Second-Law Analysis of a Cascade Joule-Thomson Microcooler
Philippe Masson (University of Houston)
- Speaker at [Invited] Superconducting Wind Generators: Development and Challenges
- Speaker at Magnetization losses in MgB2 wire matrix material
- Speaker at Testing of a sub-scale HTS coil for wind turbine generator
David McGuire (National High Magnetic Field Laboratory)
- Speaker at Heat Treatment Sensitivity of ITER Nb3Sn Wire for CS Magnets
GLEN MCINTOSH (MCINTOSH CRYOGENICS LLC)
- Speaker at Applications of Ortho-Para Hydrogen Catalyst
Jan Patrick Meier (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Speaker at Development of integrated superconducting Quadrupole Doublet Modules for operation in the SIS100 Accelerator
Barry Meneghelli (VENCORE)
- Speaker at Total Hydrocarbon Accumulation in Liquid Oxygen Storage Systems
Matthias Mentink (CERN)
- Speaker at [Invited] The origin of strain sensitivity in Nb3Sn
Philip Michael (MIT - Plasma Science and Fusion Center)
- Speaker at Insulation system for high temperature superconductor cables
- Speaker at Cold head maintenance with minimal service interruption
- Speaker at Cooling topology options for HTS rotating superconducting machinery
Gary Mills (Ball Aerospace)
- Speaker at Cryogenics on the Stratospheric TeraHertz Observatory
Alexander Molodyk (SuperOx)
- Speaker at [Invited] Production and integration of 2G HTS tapes into HTS devices
David Montanari (Fermi National Accelerator Laboratory)
- Speaker at Development of membrane cryostats for large liquid argon neutrino detectors
Leszek Motowidlo (SupraMagnetics, Inc.)
- Speaker at Toward Further Improvements in the Powder-In-Tube Process.
Tim Mulder (CERN / Twente Technical University (NL))
- Speaker at Optimized and practical electrical joints for CORC type HTS cables
Masahide Murakami (University of Tsukuba)
- Speaker at Study of He II Boiling Flow Field around a Heater
Leonid Muravey (RSTU)
- Speaker at Josephson generation of coherent THz stimulated emission on Planar Multilayer Superconducting Lattice (PMSL)
John Murphy (University of dayton Research Institute)
- Speaker at Calorimetric Measurements of AC losses in HTS coils and tapes in a Stator Environment
Cory Myers (Ohio State University)
- Speaker at Effect of Transport Current on Magnetization of an IBAD Coated Conductor
- Speaker at Suppression of magnetization and creep in Bi2212 strands
HEMANT NAIK (S. V. National Institute of Technology)
- Speaker at TRANSIENT ANALYSIS OF SINGLE STAGE GM TYPE DOUBLE INLET PULSE TUBE CRYOCOOLER
Taketsune Nakamura (Kyoto University)
- Speaker at Development of HTS induction/synchronous drive motor aiming for low carbon emission transportation systems
Kwanwoo Nam
- Speaker at Status of ITER thermal shield development
Arthur Na-Nakornpanom (Jet Propulsion Laboratory)
- Speaker at In-Flight Performance of the OCO-2 Cryocooler
Kyohei Natsume (Japan Atomic Energy Agency)
- Speaker at Cryogenic thermometry for refrigerant distribution system of JT-60SA
Masato Nawa (Graduate School of Engineering, Chiba University)
- Speaker at Mechanical problems for a Ni-alloy reinforced Bi-2223/Ag conductor -Towards a super-high field compact magnet-
Arend Nijhuis (University of Twente)
- Speaker at Development of MgB2 conductors for low field coils and feeders in DEMO fusion energy reactors
- Speaker at Pulsed field stability and AC loss of Nb3Sn CICCs by quantitative modeling and experiments
- Speaker at Transverse, axial and torsional strain tests on REBCO tapes as a basis for CORC modeling
Bill Notardonato (NASA Kennedy Space Center)
- Speaker at Ground Operations Demonstration Unit for Liquid Hydrogen Initial Test Results
Arman Nyilas (Cryogenic Engineering & Materials Expertise)
- Speaker at Anisotropic fracture toughness properties of a Nitronic 50 forging at 4.2 K
Toshio OGATA (National Institute for Materials Science)
- Speaker at Hydrogen Environment Embrittlement on Austenitic Stainless Steels from Room Temperature to Low Temperatures
Toru Ogitsu
- Speaker at Infulence of neutron irradiation on conduction cooling superconducting magnets
Jeff Olson (Lockheed Martin Space Systems Company)
- Speaker at MatISSE Microcryocooler
Yoshinori Ono (National Institute for Materials Science)
- Speaker at Effect of microstructure on high-cycle fatigue properties of Alloy718 plates
Alexander Otto (Solid Material Solutions, LLC)
- Speaker at Progress towards commercial 2212 by the integrated development of powder and wire processes
Zheng Rong OUYANG (High Magnetic Field Laboratory, Chinese Academy Sciences)
- Speaker at RECENT PROGRESS OF CRYOGENIC SYSTEM FOR 40T HYBRID MAGNET
Yavuz Oz (National High Magnetic Field Laboratory)
- Speaker at Effects of oxygen doping on vortex pinning and connectivity in highly dense Bi-2212 round wire
Sastry Pamidi (The Florida State University)
- Speaker at Cryogenic Thermal Characteristics of Gaseous Helium mixtures with Neon and Hydrogen at High Pressures
- Speaker at Temperature dependence of critical current and transport current losses of 4 mm YBCO coated conductors manufactured using nonmagnetic substrate
Wei Pan (01082543662)
- Speaker at The Research of PID Control in a Large Scale Helium Refrigerator
Xifeng PAN (Western Superconducting Technologies Co . Ltd.)
- Speaker at Development of powder-in-tube-processed multifilamentary MgB2 long wires with different reinforcement structure
Gunn-Tae Park (Institute for Basic Science)
- Speaker at The preparation of the vertical test of the beta=0.12 half-wave resonator at the Rare Isotope Science Project (RISP)
Inmyong Park (KAIST)
- Speaker at Experimental investigation of 20 K two-stage layered active magnetic regenerative refrigerator
Shrikant Pattalwar (STFC Daresbury Laboratory, UK)
- Speaker at Cryostat design for the measurement of surface resistance of thin-film coated SRF Cavities
Liujin Pei (Fermi National Accelerator Laboratory)
- Speaker at The Fermilab Muon Campus g-2 Cryogenic Distribution Remote Control System
Xuan Peng (Hyper Tech Research Inc.)
- Speaker at Improvement of tube type Nb3Sn conductor in Hyper Tech
Antonio Perin (CERN)
- Speaker at A new cryogenic test facility for large superconducting devices at CERN
Matthew Perrella (Georgia Institute of Technology)
- Speaker at Periodic Flow Hydrodynamic Resistance Parameters for ErPr Rare-Earth Regenerator Material at Cryogenic Temperatures
Bernd Petersen (DESY)
- Speaker at Experience with cryogenic operation of Accelerator Module Test Facility during testing of one third of XFEL cryomodules
John Pfotenhauer (Adviser, second author)
- Speaker at Experimental verification of cylindrical adjustable inertance tube for pulse tube refrigerators
Renzhong Piao (Graduate School of Engineering, Chiba University)
- Speaker at High resolution NMR measurements by using a 400 MHz (9.39 T) LTS/REBCO NMR magnet with a best mix use of various field correction methods ~ Towards a super-high field/compact type of NMR magnet ~
Agnieszka Piotrowska (Wroclaw University of Technology)
- Speaker at Adaptation of refrigeration compressors for Joule-Thomson cryocoolers fed with gas mixtures
- Speaker at Review of failure rate input parameters to risk analysis of cryogenic systems
Jaroslaw Polinski (Wroclaw University of Technology)
- Speaker at LNG systems for natural gas propelled ships
Anatolii Polyanskii (FSU, NHMFL, ASC)
- Speaker at MOI study of grain boundary transparencies in [001] tilt (Yb0.7Ca0.3)Ba2Cu3O7-d 6 and 9 degree bi-crystal thin films.
Ian PONG (Lawrence Berkeley National Laboratory)
- Speaker at Dimensional Changes of Nb3Sn Cables during Heat Treatment*
Krishna Prasai (California State University Bakersfield)
- Speaker at Measurement of heat capacity of yttrium silicide (Y5Si3) in the ultra-low temperature range
Tatiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)
- Speaker at Correlation of critical current density of bulk MgB2 having high connectivity between SC grains with concentration and distribution of higher magnesium borides and oxygen-enriched inhomogeneities, the role of Ti additions
- Speaker at Structure and properties of oxygen-containing thin MgB2 films
Sergiy Putselyk (Deutsches Elektronen-Synchrotron (DESY))
- Speaker at RF heat load compensation with electrical heater for XFEL accelerator - measurements at CMTB, AMTF and FLASH
Ray Radebaugh (National Institute of Standards and Technology)
- Speaker at The Role of Cryogenics in the U.S. Hydrogen Bomb Program and Vise Versa
Alexey Radovinsky (MIT Plasma Science and Fusion Center)
- Speaker at Cold head maintenance with minimal service interruption
Rajinikumar Ramalingam
- Speaker at A study on intermediate buffer layer of a coated Fiber Bragg Grating cryogenic temperature Sensors.
Dick Reed (Cryogenic Materials, Inc.)
- Speaker at Thermal Contraction of Electrical Insulators
Ian Richardson (Washington State University)
- Speaker at Helium–Hydrogen PVT-x Measurements and Equation of State
Thomas Richter (Karlsruhe Institute of Technology (KIT))
- Speaker at Design details of the current lead test facility Karlsruhe (CuLTKa)
- Speaker at Influence of tailored MLI for complex surface geometries on heat transfer
Jesper Ringnér (ESS)
- Speaker at Design challenges of a 20kW liquid hydrogen cooling system for The European Spallation Source cold moderators.
Chris Rista, P.E. (Barber-Nichols Inc.)
- Speaker at Engineering, Manufacture and Preliminary Testing of the ITER Toroidal Field (TF) Magnet Helium Cold Circulator
Gabriella Rolando (CERN)
- Speaker at Thermal analysis of the cold mass of the 2 T solenoid for the PANDA detector at FAIR
Charles Rong (U.S. Army Research Laboratory)
- Speaker at Persistent Current Characteristics at Temperatures Below 77K in Closed Superconducting Loops Made Out of RE123 Coated Conductors
Ronald Ross (Jet Propulsion Laboratory)
- Speaker at Quantifying MLI Thermal Conduction in Cryogenic Applications from Experimental Data
Bernard ROUSSET (CEA Grenoble)
- Speaker at Cryogenic turbulence test facilities at CEA/SBT
- Speaker at Dynamic simulations of the cryogenic system of a tokamak
- Speaker at Experimental characterization of the ITER TF structure cooling in HELIOS test facility
ASHISH ALEX SAM (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur, India)
- Speaker at Influence of thermophysical properties of working fluid on the design of cryogenic turboexpanders using ns-ds diagram
Jan Sas (The Karlsruhe Institute of Technology)
- Speaker at The Mechanical and material properties of 316LN austenitic stainless steel for the fusion application in cryogenic temperatures
Jared Sass (NASA Kennedy Space Center)
- Speaker at OPERATIONAL HISTORY OF LIQUID HYDROGEN TANK WITH GLASS BUBBLES INSULATION
laura savoldi (Politecnico di Torino)
- Speaker at Test of heat load smoothing strategies for the ITER Toroidal Field coils by means of Artificial Neural Networks
Matthieu Scannapiego (Karlsruhe Institute of Technology)
- Speaker at Experimental and CFD analyses of a thermal radiation shield dimple plate for cryogenic pump application
Sonja Schlachter (Karlsruhe Institute of Technology)
- Speaker at Performance of conduction-cooled HTS Magnet in radio blackout mitigation experiment
Federico Scurti (NC State University)
- Speaker at Quench detection via Rayleigh scattering based fiber optic distributed sensors
Kavita Selva (Clear Lake High School)
- Speaker at Assessment of Critical Factors Affecting the Performance of Trapped Field Magnets using Thin Film Superconductor Tapes
Venkat Selvamanickam (University of Houston)
- Speaker at [Invited] Demonstration of Advanced Superconductors with Four-fold Improved Performance for High Power Wind Generators
- Speaker at [Invited] High Performance REBCO Coated Conductors for High Field and AC Applications
Luigi Serio (CERN)
- Speaker at CERN experience and strategy for the maintenance of cryogenic plants and distribution systems
VOLODYMYR SHATERNIK (G.V.Kurdyumov Institute for Metal Physics)
- Speaker at JOSEPHSON JUNCTIONS WITH RESONANCE-PERCOLATING CHARGE TRANSPORT
Sergey Shavkin (NRC "Kurchatov Institute", Moscow, Russia)
- Speaker at Investigation of structural and critical parameters changings after heat treatment of thin NbTi cold-rolled foil with anisotropic pinning
Tengming Shen (Fermilab)
- Speaker at Effect of heat treatment and test barrel materials on critical current measurements of Ag/Bi2212 round wires using ITER barrel configurations
Soojin Shin (Korea Institute of Science and Technology)
- Speaker at Performance of Cryogenic Thermal Insulation Materials under Liquid Hydrogen Environment
Takakazu Shintomi (KEK)
- Speaker at Performance of a 10 kJ SMES Model Cooled by Liquid Hydrogen Thermo-Siphon Flow for ASPCS Study
Masahiro Shiotsu (Kyoto University)
- Speaker at Film Boiling Heat Transfer from a Wire to Upward Flow of Liquid Hydrogen and Liquid Nitrogen
Yuko Shiroyanagi (Argonne National Laboratory)
- Speaker at Thermal Analysis of Superconducting Undulator (SCU) Cryomodules
Peter Shirron (NASA/GSFC)
- Speaker at Fast-response, active gas-gap heat switches for low temperature applications
Elijah Shoemake (HYdrogen Properties for Energy Research (HYPER) Laboratory, Washington State University)
- Speaker at Hydrogen refrigeration via kinetic para-ortho manipulation in a vortex tube
- Speaker at Tensile strengths of polyamide based 3D printed polymers in liquid nitrogen
QuanSheng Shu (Retired Senior Scientist)
- Speaker at ADVANCED AND ENERGY SAVING THERMAL INSULATIONS FOR CRYOGENIC APPLICATIONS
Przemyslaw Smakulski (Wroclaw University of Technology)
- Speaker at Dynamics of liquid nitrogen cooling process of solid surface at wetting contact surface.
Sergey Sobol (Technion - Israel Institute of Technology)
- Speaker at Linear Resonance Compressor for Stirling-Type Cryocoolers Activated by Piezoelectric Stack-Type Elements
Naihao Song (Institute of electrical engineering chinese academy of science)
- Speaker at The structural design of composite flywheel
William Soyars (Fermilab)
- Speaker at Cryogenic Refrigeration System for Fermilab’s Muon Experimental Program
Philip Spoor (Chart Industries)
- Speaker at Large 'pulse-tube' oxygen liquefier for CVN-78 carriers: an update
Wolfgang Stautner (GE Global Research)
- Speaker at Occurrence of thermoacoustic phenomena at 0.8 K, 4 K and above
Mike Sumption (The Ohio State University)
- Speaker at Persistent Magnetization and Decay in Bi:2212, YBCO, and Nb3Sn and influence on Accelerator Magnet Field Errors
- Speaker at The Development of Persistent joints for MgB2 Conductors
Jiuce Sun (Karlsruhe Institute of Technology)
- Speaker at Conceptual Design and Thermal Analysis of a modular Cryostat for one single coil of a 10 MW Offshore Superconducting Wind Turbine
Karthik Sunil (School of mechanical engineering)
- Speaker at Numerical and Experimental Investigations of composite materials in cryogenic environment
Adam Swanger (NASA Kennedy Space Center)
- Speaker at Apparatus and method for low-temperature training of shape memory alloys
- Speaker at Modification of liquid hydrogen tank for integrated refrigeration and storage
Suguru Takada (National Institute for Fusion Science)
- Speaker at [Invited] Heat transfer during bubble shrinking in saturated He II under microgravity condition
Makoto Takayasu (MIT)
- Speaker at Analytical Investigation in Bending Characteristic of Twisted Stacked-Tape Cable Conductor
Minoru Takeda (Kobe University)
- Speaker at Superconducting characteristics of MgB2 short wires of long level sensor for liquid hydrogen
Jun Tan (Shanghai Institute of Technical Physics)
- Speaker at Theoretical and experimental investigations on impedance of pulse tube cold fingers to match with linear compressors
Xuan Tao (Institute of Refrigeration and Cryogenics,Zhejiang University)
- Speaker at Thermodynamic analysis of a intermediate cooled heat exchanger working in high temperature ratio for Joule-Thomson cooler
Grzegorz Tatkowski (Fermilab)
- Speaker at Forced Two-Phase Helium Cooling Scheme for Mu2e Transport Solenoid
HIDEKI TATSUMOTO (Japan Atomic Energy Agency)
- Speaker at Operational Experiences of J-PARC cryogenic hydrogen system for a spallation neutron source
- Speaker at Performance evaluation of a developed orifice type heater for thermal compensation control at J-PARC cryogenic hydrogen system
- Speaker at Pressure and temperature fluctuation simulation of J-PARC cryogenic hydrogen system
- Speaker at Transient heat transfer from a wire to a forced flow of subcooled liquid hydrogen passing through a vertically-mounted pipe
Laurent Tavian (CERN)
- Speaker at Preliminary design of the beam screen cooling for the Future Circular Collider of hadron beams
Herman Ten Kate (CERN)
- Speaker at [Invited] Superconducting Detector Magnets for the proposed 100 TeV Future Circular Collider
Marcel ter Brake (University of Twente, The Netherlands)
- Speaker at Test results of sorption-based helium-3 pump for a closed-cycle dilution refrigerator
- Speaker at Development of a sorption-based Joule-Thomson cooler for the METIS instrument on E-ELT
Gonçalo Tomás (LIBPhys, Physics Department, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa)
- Speaker at Low-temperature thermal conductivity of highly porous copper
Masaru Tomita (Railway Technical Research Institute)
- Speaker at Critical Current Properties of HTS Twisted Stacked-Tape Cable in Subcooled Liquid Nitrogen
Michael Tomsic (Hyper Tech Research)
- Speaker at [Invited] Development of MgB2 superconductors and coils for practical applications
- Speaker at [Invited] Modular and Repairable Superconducting Wind Turbine Generators 5-20MW
Jaime Toro Medina (NASA Kennedy Space Center)
- Speaker at Simulated Propellant Loading System: Testbed for Cryogenic Component and Control Systems Research & Development
Nikolay Tsyrulin (attocube systems AG)
- Speaker at High Precision Interferometric Dilatometer For Cryogenic Environments.
James Tuttle (NASA/GSFC)
- Speaker at Recent NASA/GSFC Cryogenic Measurements of the Total Hemispheric Emissivity of Black Surface Preparations
Nir Tzabar (University of Twente)
- Speaker at Modeling the Adsorption of Mixed-Gases Based on Pure Gas Adsorption Properties
Osamu Umezawa (Yokohama National University)
- Speaker at Tensile properties and conductivities of a precipitation hardened and cold-rolled Cu-0.3Cr-0.1Zr alloy at cryogenic temperature
Hiten Vaghela (ITER-India, Institute for Plasma Research)
- Speaker at Load specification and embedded plate definition for the ITER cryoline system
Hitensinh Vaghela (ITER-India, Institute for Plasma Research)
- Speaker at Value Engineering in System of Cryoline and Cryodistribution for ITER: In-kind Contribution from India
- Speaker at DESIGN REALIZATION TOWARDS THE QUALIFICATION TEST OF ITER COLD CIRCULATOR
Luca Valdarno (CERN)
- Speaker at Thermal Design and Performance results of the first High Beta Cryomodule for HIE-ISOLDE at CERN
Danko van der Laan (Advanced Conductor Technologies)
- Speaker at [Invited] Record engineering current density of 246 A/mm2 at 17 T in HTS Conductor on Round Core (CORC) cables made at Advanced Conductor Technologies
Alexander Veprik (SCD)
- Speaker at Multi-slope warm-up calorimetry of Integrated Dewar-Detector Assemblies
Gerard VERMEULEN (Institut Neel (CNRS))
- Speaker at Coupled tests of the Closed Cycle Dilution Refrigerator and 3He compressor for space
Kishor Kumar V V (Department of Mechanical Engineering, Government College of Engineering, Kannur)
- Speaker at Parametric Investigation of multi-mesh Regenerator of a Miniature Stirling Cryocooler
Robert Walsh (Florida State University)
- Speaker at TENSILE AND FATIGUE QUALIFICATION TESTING of ITER-CS CONDUIT ALLOY JK2LB
Junjie Wang (Technical Institute of Physics and Chemistry, CAS)
- Speaker at A cryogenic tensile testing apparatus for micro-samples cooled by miniature pulse tube cryocooler
- Speaker at Effect of Cryogenic Treatment on Wear Resistance of Gray Cast Iron
- Speaker at Evaporation Study for Integration of SOFI and MLI in Orbiting Liquid Oxygen Storage
- Speaker at Experimental and simulation study on a Vuilleumier cryocooler with larger pressure ratio
- Speaker at Experimental study of one-stage VM cryocooler operating below 8K
- Speaker at Numerical studies on the phase adjustment systems of high frequency pulse tube cryocooler with a gradient temperature distribution
- Speaker at Theoretical analysis of liquefaction for liquid air energy storage
Wei Wang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, P.R. China)
- Speaker at Fabrication of Biomedical Titanium Alloys with High Strength and Low Modulus by Spark Plasma Sintering
Longyi Wang (Institute of Refrigeration and Cryogenics, Zhejiang University)
- Speaker at Study on A Cascade Pulse Tube Cooler with Energy Recovery: New Method for Approaching Carnot
yaqiong wang (Institute of High Energy Physics)
- Speaker at The hydrogen circulation cold box of CSNS cryogenic system
Guoping Wang (Institute of High Energy Physics(IHEP))
- Speaker at The hydrogen circulation cold box of CSNS cryogenic system
Miao Wang (Shaanxi Normal University)
- Speaker at The processing and superconducting properties of large scale single domain GdBCO bulk fabricated from graded solid phase source powders by the modified infiltration growth method
Chao Wang (Cryomech)
- Speaker at A Cryogen Recycler with Pulse Tube Cryocooler for Simultaneously Recondensing Helium and Nitrogen
xilong wang (European Spallation Source ESS AB)
- Speaker at ESS accelerator plant process design
Jun Watanabe (Kyoto University)
- Speaker at R&D status of highly efficient Stirling-type cryocooler for superconducting drive motor
Robert Webber (Hypres, Inc.)
- Speaker at Cool-down acceleration for G-M cryocoolers with thermal oscillations passively damped by helium
Roy Weinstein (University of Houston)
- Speaker at [Invited] Giant Field Leap in Bulk HTS – A Systematic Failure of the Critical State Model
Klaus-Peter Weiss (KIT, Institute for Technical Physics)
- Speaker at Thermal and mechanical properties of selected 3D printed thermoplastics in the cryogenic temperature regime
- Speaker at Qualification of Electron-Beam Welded Joints between Copper and Stainless Steel for Cryogenic Application
Ida Westermann (Norwegian University of Science and Technology)
- Speaker at Permanent effect of a cryogenic spill on fracture properties of structural steels
Michael White (Fermilab)
- Speaker at Cryogenic System for the Cryomodule Test Stand at Fermilab
Shannon White (Aspen Aerogels, Inc.)
- Speaker at Multi-Layer Aerogel Insulation for Cryogenic Applications
Gerard Willering (CERN)
- Speaker at Performance of the cold powered diodes and diode leads in the main magnets of the LHC
Ruud Woude van de (Demaco)
- Speaker at European XFEL-linac Feed and End cap dimensional tolerance validation
dong XIA (Chinese Academy of Sciences)
- Speaker at Performance analysis of superconducting generator electromagnetic shielding
Lianyou Xiong (Technical Institute of Physics and Chemistry, CAS)
- Speaker at Helium extraction and nitrogen removal from LNG boil-off gas
- Speaker at An Optimization Design of A 20 K Helium Cryoplant Based On the Genetic Algorithm
- Speaker at Conceptual Design of the Cryogenic System for the HL-2M System
- Speaker at The Study of Flow Performance inside a High-speed Radial-axial Flow Cryogenic Turbo-expander impeller
Peng Xu (Technical Institute of Physics and Chemistry of Chinese Academy of Science)
- Speaker at The simulation of the heat and mass transfer performance in 1st heat exchanger of the inner purifer
- Speaker at Numerical Simulation of Heat Transfer for Wall-type and Fin-type Heat Exchanger
Xingchen Xu (the Ohio State University)
- Speaker at Shift of the Fp-B curve peak of Nb3Sn conductors with very fine grain sizes
- Speaker at Suppression of persistent-current magnetization of Nb3Sn strands by transport current
Mingyao Xu (Sumitomo Heavy Industries, Ltd.)
- Speaker at Numerical simulation and experimental investigation of a novel Scotch yoke for a Gifford-McMahon cryocooler
Hirofumi Yamasaki (National Institute of Advanced Industrial Science and Technology)
- Speaker at [Invited] Feasibility study project to realize the merits of 10 MW-class superconducting wind turbine generators
Tao Yan (Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences)
- Speaker at Experimental research on heat transfer coefficients for cryogenic internally finned heat exchanger
Yuan Yang (OSU)
- Speaker at High Strain and Twisting Tolerance in AIMI and PIT MgB2 Strands
- Speaker at Influence of ZnO and Dy2O3 on MgB2 Bulks Fabricated by High Temperature and Pressure Reaction
Liyang Ye (Fermi National Accelerator Laboratory)
- Speaker at Quench induced critical current degradation in REBCO coated conductor and Bi2223 tape
Sungwoon Yoon (Institute for basic science)
- Speaker at Preliminary Design of Helium Refrigeration System for RAON
Jie Yuan (AMSC)
- Speaker at Progress and Status of Cryogenic Refrigeration System for Project Hydra
roberto zanino (politecnico di torino)
- Speaker at Thermal-hydraulic analysis of transients in the HELIOS loop including a CICC section
Qiyong Zhang (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at The process design of the forced-flow cooled for CFETR CS model coil
HONG ZHANG (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
- Speaker at Effect of Cryogenic Treatment on Wear Resistance of Gray Cast Iron
jinhui zhang (Zhejiang University)
- Speaker at A dynamic optical measurement system for cryogenic fluids using laser interferometry
Lei Zhang (Shanghai Institute of Technical Physics, Chinese Academy of Sciences)
- Speaker at Theoretical and experimental investigations on the performance characteristics of the linear compressor for the pulse tube cryocooler
zhuo zhang (IHEP)
- Speaker at The helium recovery and purification system of the ADS-inject I
- Speaker at Construction of the Cryogenic System for IHEP-ADS Injector I
YUN ZHANG (North Carolina State University)
- Speaker at Processing of Bi2Sr2CaCu2Ox superconductors via direct oxidation of metallic precursors
- Speaker at Synthesis of Bi2Sr2CaCu2Ox oxide precursor from nano-oxides and its relationship with multifilamentary wire transport properties
Yifei Zhang (SuperPower Inc.)
- Speaker at Irreversible tensile stress of 2G HTS wires made by IBAD-MOCVD on Hastelloy substrates
Zhiwei Zhou (Institute of Plasma Physics,Chinese Academy of Sciences)
- Speaker at Design, Development and Application of Automatic Control Strategies for a 500W@4.5K Helium Refrigerator/Liquefier
gang zhou (Technical Institute of Physics and Chemistry, CAS)
- Speaker at Experiment study for controlling and stabilizing the sample temperature using a cryocooler
- Speaker at Natural convection effect on the temperature fluctuation in a cylinder enclosure with supercritical helium.docx
- Speaker at Numerical investigation on the temperature control of a NIF cryogenic target
- Speaker at Optimization of a small-scale thermoacoustic cooler
- Speaker at The Measurement and Uncertainty Analysis of Thermal Resistance in Cryogenic Temperature Sensor Installation
zhenjun zhou
- Speaker at Investigation on Joule-Thomson effect of the cryogenic propellants in thermodynamic vent system
- Speaker at Process analysis and experimental verification of compact JT cryocooler at liquid helium temperature region
Shaowei ZHU (School of Mechanical Engineering, Tongji University)
- Speaker at Two-stage pulse tube refrigerator with step displacer as phase shifter
Iason Zisis (TU Eindhoven, The Netherlands)
- Speaker at Hypervelocity impacts into laminates: experiments and multiphase SPH computations

Choose timezone

CEC-ICMC 2015 - Timetable, Abstracts and Presentations

Support