Conveners
C1PoA - Cryogenics for Power Applications, Energy, Fuels and Transportation I
- Pat Kelley (TechSource, Inc.)
- Gary Mills (Ball Aerospace & Technologies Corp.)
-
Hirokazu Hirai (Taiyo Nippon Sanso Corporation)29/06/2015, 09:00CEC-09 - Cryogenics for Power Applications, Energy, Fuels and TransportationPoster PresentationApproaching to commercializing of High Temperature Superconducting (HTS) power applications is becoming more active. And cooling system is very important and essential for practical HTS power applications. HTS power applications on commercial scale will require cooling system which has cooling capacity from 2kW to 10kW at 65K, high reliability (long maintenance interval) and compactness. Taiyo...Go to contribution page
-
Dr Leslie Bromberg (MIT - Plasma Science and Fusion Center), Dr Philip Michael (MIT - Plasma Science and Fusion Center)29/06/2015, 09:00CEC-09 - Cryogenics for Power Applications, Energy, Fuels and TransportationPoster PresentationCryogenic system complexity presents a major challenge to the implementation of superconducting technologies. At MIT, we have developed concepts to simplify the cryogenic environment for superconducting rotating machinery, such as HTS motors and generators. We present cooling schemes for the rotor of a high-speed rotating machine that avoid the use of rotating cryogenic seals, which are...Go to contribution page
-
Masataka Iwakuma (Kyushu University)29/06/2015, 09:00CEC-02 - Large-Scale Systems, Facilities, and TestingPoster PresentationIn Japan, we have developed 3φ-66/6.9kV-20MVA RE1Ba2Cu3O7-δ(RE:Rare Earth, Y, Gd and so on, REBCO) superconducting transformers with a current limiting function as a national project. First we made a basic research on the ac loss reduction and the enhancement of current capacity of REBCO superconducting tapes, the dielectric strength of liquid nitrogen, a current limiting function of REBCO...Go to contribution page
-
Seok-Cheol Ko (Kongju National University)29/06/2015, 09:00CEC-08 - Cryogenic Power Cables and LeadsPoster PresentationIn this study, a superconducting fault current limiter (SFCL) with two magnetic paths using E-I iron core was proposed and its peak current limiting characteristics were analyzed. For the suggested SFCL to effectively perform the peak current limiting operation, the design of the SFCL considering its electrical equivalent circuit for E-I iron core was needed. In addition, the analysis on the...Go to contribution page
-
dong XIA (Chinese Academy of Sciences)29/06/2015, 09:00CEC-09 - Cryogenics for Power Applications, Energy, Fuels and TransportationPoster PresentationThe magnetic induction intensity of superconducting generator can reach a few Tesla, relative to the conventional generator, it has small volume and weight, compact structure, high power density and efficiency, big ultimate capacity, good stability, so superconducting generator is regarded as one of the attractive and novel generator with business competitiveness in the near...Go to contribution page
-
Dr Takakazu Shintomi (KEK)29/06/2015, 09:00CEC-09 - Cryogenics for Power Applications, Energy, Fuels and TransportationPoster PresentationFrom the point of view of environment and energy problems, the renewable energies have been attracting attention. However, fluctuating power generation by the renewable energies affects the stability of the power network. Thus, we propose a new electric power storage and stabilization system, Advanced Superconducting Power Conditioning System (ASPCS), which consists of a Superconducting...Go to contribution page