Conveners
C1PoD - Cryogenic Distribution Systems
- Kelly Dixon (Jefferson Lab)
- Jaroslaw Fydrych (European Spallation Source ESS AB)
Mr
Marinco Lefevere
(Demaco), Mr
Ronald Dekker
(Demaco), Dr
Ruud Woude van de
(Demaco)
29/06/2015, 09:00
CEC-02 - Large-Scale Systems, Facilities, and Testing
Poster Presentation
Feed and End caps are connection boxes between Helium transfer lines and Cryomodules of the European XFEL project at DESY.
Feed and End caps are characterised extreme narrow dimensional tolerances at the Cryomodule interface, in order to keep the XFEL linac beam pipe aligned perfectly during cryogenic operation.
The expected movements of the beam pipe and process pipes due to pressure...
Mr
Nathaniel Laverdure
(Jefferson Lab)
29/06/2015, 09:00
CEC-02 - Large-Scale Systems, Facilities, and Testing
Poster Presentation
The MSU-FRIB cryogenic distribution system supports the 2 K, 4 K, and 35 K operation of more than 70 loads in the accelerator and the experimental areas. It is based on JLab and SNS experience with bayonet-type disconnects between the loads and the distribution system for phased commissioning and cryomodule maintenance. The linac transfer line, which features three separate transfer line...
Mr
Hiten Vaghela
(ITER-India, Institute for Plasma Research)
29/06/2015, 09:00
CEC-01 - Large-Scale Refrigeration and Liquefaction
Poster Presentation
The ITER cryoline (CL) system is part of overall ITER cryogenic system involving the cryoplant and the cryodistribution. The CLs are complex network of vacuum-insulated multi and single process pipe lines, distributed in three different areas at ITER site. The conceptual design phase of the lines has been completed and the detailed design, fabrication and installation will be performed by...
Mr
Hitensinh Vaghela
(ITER-India, Institute for Plasma Research)
29/06/2015, 09:00
CEC-02 - Large-Scale Systems, Facilities, and Testing
Poster Presentation
System of cryoline and cryodistribution for ITER has matured to a stage of preliminary design phase with the advent of industrial associates. Starting from the cold power source, the system of cryoline and cryodistribution transfers the controlled cold power through a large network to the superconducting magnets and cryopumps. The functional responsibility also includes very high reliability...
