Apr 9 – 13, 2018
Beurs van Berlage
Europe/Zurich timezone

FCC-hh transfer line and injection design

Not scheduled
Beurs van Berlage

Beurs van Berlage

Damrak 243, 1012 ZJ Amsterdam, Netherlands
Board: 3AMS20A
EuroCirCol FCC-hh injector


Elisabeth Renner (Vienna University of Technology (AT))


Due to the high energy of the injected FCC-hh proton beam (1.3 or 3.3 TeV) a detailed evaluation of the injection design regarding potential failure cases is of major importance. Further attention has to be given to the fact that the injection is – as in LHC - located upstream of the side experiments.
Resulting design and hardware specifications for the extraction from the High Energy Booster, the partly superconducting transferline and the injection insertion will be discussed. A layout for the transferlines combined with an injection protection scheme is proposed. Failure scenarios related to the injection process are identified and simulations to validate the efficiency of the protection devices are presented. The feasibility of implementing a massless septum to mitigate the impact of a malfunctioning injection kicker will be discussed.

Primary author

Elisabeth Renner (Vienna University of Technology (AT))


Miroslav Georgiev Atanasov (CERN) Mike Barnes (CERN) Wolfgang Bartmann (CERN) Chiara Bracco (CERN) Brennan Goddard (CERN) Anton Lechner (CERN) Francesco Maria Velotti (CERN) David Woog (CERN) Florian Burkart Agnieszka Chmielinska (EPFL - Ecole Polytechnique Federale Lausanne (CH)) Alejandro Sanz Ull (Eindhoven Technical University (NL)) Michael Hofer (Vienna University of Technology (AT)) Linda Susanne Stoel (Vienna University of Technology (AT))

Presentation materials

There are no materials yet.