IWAA 2022, CERN

Session

Session 12 - Surveying concepts and strategies II

Session 12 - Surveying concepts and strategies II

4 Nov 2022, 10:15

Conveners

Session 12 - Surveying concepts and strategies II: Session 12 - Surveying concepts and strategies II

• Georg Gassner (SLAC National Accelerator Laboratory)

130. Hidden Magnets Measurement and Alignment System for a High Radiation Area at FAIR – Part II: Design and Benchmarking

Davide Bianculli (GSI Helmholtz Centre for Heavy Ion Research GmbH)

04/11/2022, 10:15

Oral

131. SurveyPad, a common interface to GEODE & data processing tools

Przemyslaw Lewandowski (CERN)

04/11/2022, 10:40

Oral

132. ESRF Upgrade EBS Beamline Constraints and How They Were Respected

Cristina Gonzalez-Torres (ESRF)

04/11/2022, 11:05

Oral

62. ESRF Upgrade EBS Beamline Constraints and How They Were Respected

Ms Cristina Gonzalez-Torres (ESRF)

Surveying Concepts and Strategies

Oral

ESRF–EBS (Extremely Brilliant Source) is the ESRF’s 150M€ facility upgrade, over 2015-2022, bringing its scientific users a first-of-a-kind, low-emittance, high-energy synchrotron light source and new, cutting-edge beamlines. With a revolutionary new storage ring concept that increases the brilliance and coherence of the X-ray beams produced by a factor of 100 compared to present-day light...

59. Long-Term-Follow-Up at Superconducting Components under Cryogenic Conditions – Part II: The Successful Monitoring of a Superconducting Quadrupole during Three Thermal Cycles

Mr Torsten Miertsch (GSI Helmholtz Centre for Heavy Ion Research GmbH)

Surveying Concepts and Strategies

Oral

After the adaptation and enhancement of circumstances resulted from the first measurements through glass and occurred peculiarities a successful measurement campaign was done.
At the FAIR synchrotron SIS100 there exist several superconducting quadrupole doublet modules (QDM). One of these QDM was observed and monitored during three thermal cycles, measuring outer and inner references at...

17. SurveyPad, a common interface to GEODE & data processing tools

Przemyslaw Lewandowski (CERN)

Surveying Concepts and Strategies

Oral

The metrology and alignment of components installed in accelerators is a very complicated process requiring many calculations to ensure the best performance of the CERN complex. Throughout the years, surveyors at CERN have been relying on several pieces of offline software, each meant for different purposes, with different text data formats and principles of operations. At the same time, they...