Name: CEC/ICMC 2023 Abstracts & Technical Program
Start: 2023-07-09T08:00:00-10:00
End: 2023-07-13T15:00:00-10:00
Location: Hawaii Convention Center

C1Or2A-01: Modelling and optimization of cryogenic mixed-refrigerant cycles for the cooling of superconducting power cables (in session "C1Or2A: Non-Aerospace Coolers I: Brayton and JT Coolers")

C1Or2A-02: Development of Brayton Circulating Cooling System (in session "C1Or2A: Non-Aerospace Coolers I: Brayton and JT Coolers")

C1Or2A-03: Acoustic expanders for use in recuperative cryocoolers (in session "C1Or2A: Non-Aerospace Coolers I: Brayton and JT Coolers")

C1Or2A-04: Withdrawn (in session "C1Or2A: Non-Aerospace Coolers I: Brayton and JT Coolers")

C1Or2A-05: Withdrawn (in session "C1Or2A: Non-Aerospace Coolers I: Brayton and JT Coolers")

C1Or2B-01: Conservation of Helium while Maintaining High System Purity (in session "C1Or2B: Large Scale III: Cryogenic System Modeling and Simulation")

C1Or2B-02: Dynamic systems modeling of the Spallation Neutron Source Cryogenic Moderator System to optimize transient control and prepare for power upgrades (in session "C1Or2B: Large Scale III: Cryogenic System Modeling and Simulation")

C1Or2B-03: Simulation of the cool-down process for the ESS cryogenic moderator system (in session "C1Or2B: Large Scale III: Cryogenic System Modeling and Simulation")

C1Or2B-04: Numerical modeling of the cool-down of the helium transfer-lines for FRIB Linac and experimental systems (in session "C1Or2B: Large Scale III: Cryogenic System Modeling and Simulation")

C1Or2B-05: Dynamic simulation of DALS test facility cryoplant (in session "C1Or2B: Large Scale III: Cryogenic System Modeling and Simulation")

C1Or2C-01: [Invited] Accelerator Magnet Development Based on COMB Technology with STAR® Wires* (in session "C1Or2C: Superconducting I: Magnet Systems")

C1Or2C-02: Thermal engineering of the Cryogenic Beam Position Monitors for the EIC Hadron Storage Ring (in session "C1Or2C: Superconducting I: Magnet Systems")

C1Or2C-03: Conduction cooled cryostat for small-scale superconducting radio frequency accelerator applications (in session "C1Or2C: Superconducting I: Magnet Systems")

C1Or2C-04: [Invited] Superconducting undulator development for synchrotrons and FELs (in session "C1Or2C: Superconducting I: Magnet Systems")

C1Or2D-01: Recent Computational Fluid Dynamics Modeling of Flow Boiling During Cryogenic Propellant Transfer in Terrestrial and Reduced Gravity (in session "C1Or2D: Thermophysics II: Numerical Studies")

C1Or2D-02: Investigation and perspectives of using Graph Neural Networks to model complex systems: the simulation of the helium II bayonet heat exchanger in the LHC (in session "C1Or2D: Thermophysics II: Numerical Studies")

C1Or2D-03: Vapor-Liquid Interfaces of Cryogenic Fluids in Presence of Non-Condensable Gases: Insights from Molecular Simulations (in session "C1Or2D: Thermophysics II: Numerical Studies")

C1Or2D-04: Modeling of Cryogenic Heated-Tube Flow Boiling Experiments of Nitrogen and Methane with the Generalized Fluid System Simulation Program (in session "C1Or2D: Thermophysics II: Numerical Studies")

C1Or2D-05: A numerical investigation on vapor-liquid equilibrium of mixed-refrigerants by solving the Rachford-Rice equation (in session "C1Or2D: Thermophysics II: Numerical Studies")

C1Or3A-01: Performance Optimization of a 4K Hybrid JT Cooler for the HUBS Mission (in session "C1Or3A: Aerospace Coolers II: JT")

C1Or3A-02: Effect of working fluid on performance of a 4.5K JT cooler (in session "C1Or3A: Aerospace Coolers II: JT")

C1Or3A-03: Further experimental work in mixed-gas Joule-Thomson cryocooling (in session "C1Or3A: Aerospace Coolers II: JT")

C1Or3A-04: Performance of a single-stage mixed refrigerant miniature Joule-Thomson cryocooler operating at 90-100 K for space applications (in session "C1Or3A: Aerospace Coolers II: JT")

C1Or3A-05: Development of thin-plate sorption compressor and miniaturized check valves for 5 K J- T cooler. (in session "C1Or3A: Aerospace Coolers II: JT")

C1Or3A-06: Experimental Performance of a Modified Collins Cycle Cryocooler for In-space Applications (in session "C1Or3A: Aerospace Coolers II: JT")

C1Or3B-01: LCLS-II Helium Refrigeration System: A comprehensive overview of the project (in session "C1Or3B: Large Scale Refrigeration / Liquefaction I")

C1Or3B-02: End Station Refrigerator 2 Cryoplant at JLAB (in session "C1Or3B: Large Scale Refrigeration / Liquefaction I")

C1Or3B-03: Large-scale 4.5K helium refrigeration system for GSI FAIR (in session "C1Or3B: Large Scale Refrigeration / Liquefaction I")

C1Or3B-04: Preliminary studies of the MINERVA cryogenic supply system (in session "C1Or3B: Large Scale Refrigeration / Liquefaction I")

C1Or3B-05: Experimental study on the temperature distribution characteristics of gas-liquid two-phase flow in the cold energy storage packed bed (in session "C1Or3B: Large Scale Refrigeration / Liquefaction I")

C1Or3B-06: Design of nonflammable mixed refrigerants based on the partial molar enthalpy difference in mixed-refrigerant Joule-Thomson refrigerators with/no pre-cooling stage (in session "C1Or3B: Large Scale Refrigeration / Liquefaction I")

C1Or3B-07: Influences of distributed J-T effect on the performance of mixed-refrigerant Joule-Thomson refrigeration cycle (in session "C1Or3B: Large Scale Refrigeration / Liquefaction I")

C1Or3C-01: [Invited] Simulation test platform for LH2 controlled storage/transfer (in session "C1Or3C: Hydrogen I: Heavy Duty Vehicles")

C1Or3C-02: Research on the matching supply of power and cold energy of liquid hydrogen cold chain logistics vehicles (in session "C1Or3C: Hydrogen I: Heavy Duty Vehicles")

C1Or3C-03: Withdrawn (in session "C1Or3C: Hydrogen I: Heavy Duty Vehicles")

C1Or3D-01: [Invited] Cryogenic aspects of a 20 MW class superconducting generator for the Renewables industry (in session "C1Or3D: Superconducting II: Energy and Transport Systems")

C1Or3D-02: Novel modular PCS and decoupling control for SMES with coupling superconducting coil (in session "C1Or3D: Superconducting II: Energy and Transport Systems")

C1Or3D-03: Withdrawn (in session "C1Or3D: Superconducting II: Energy and Transport Systems")

C1Or3D-04: Design Considerations of SMES for Pulsed Power Applications (in session "C1Or3D: Superconducting II: Energy and Transport Systems")

C1Or3D-05: Novel superconducting propulsor cooling method for All-Electric Aircraft (in session "C1Or3D: Superconducting II: Energy and Transport Systems")

C1PL1-01: Airbus: A discussion about the use of cryogenic hydrogen for aviation propulsion (in session "Opening & CEC Plenary: Amanda Simpson, Airbus Americas, Inc")

C1Po1A-02: Energy of Fluid (EOF) Simulation of Large-Scale Densification and Solidification of Hydrogen (in session "C1Po1A: Thermophysics I: Numerical Studies")

C1Po1A-03: Enhanced cryogenic boiling heat transfer by surface coating of metal (in session "C1Po1A: Thermophysics I: Numerical Studies")

C1Po1A-06: moved to C3Po1C-09 (in session "C1Po1A: Thermophysics I: Numerical Studies")

C1Po1B-01: Design and Construction of a Stop Valve for 1.8K System (in session "C1Po1B: Components I: Valves")

C1Po1B-02: A cryogenic test equipment of liquid hydrogen safety valve cooled by G-M cryocooler (in session "C1Po1B: Components I: Valves")

C1Po1B-04: Development of Conformable Cryogenic Valve Seats for Resilience to Foreign Object Debris (in session "C1Po1B: Components I: Valves")

C1Po1B-05: A novel lightweight cryogenic valve with minimized heat transfer (in session "C1Po1B: Components I: Valves")

C1Po1C-01: Analysis and optimization on heat leakage structure of cold compressor in large-scale refrigeration system (in session "C1Po1C: Components II: Cold Compressors & Expanders")

C1Po1C-02: The static and dynamic characteristics of hydrostatic journal gas bearing lubricated by hydrogen in cryogenic turbine expander in large hydrogen liquefier (in session "C1Po1C: Components II: Cold Compressors & Expanders")

C1Po1C-03: The theoretical research on static and dynamic characteristics of orifice throttling hydrostatic thrust gas bearing of helium cryogenic turbine expander (in session "C1Po1C: Components II: Cold Compressors & Expanders")

C1Po1C-04: Efficiency improvement of small cryogenic helium turbo-expanders in TIPC (in session "C1Po1C: Components II: Cold Compressors & Expanders")

C1Po1C-05: Theoretical and Experimental study of High Speed tilting Pad Gas Bearings (in session "C1Po1C: Components II: Cold Compressors & Expanders")

C1Po1C-06: The variable frequency driver upgrade for cryogenic system (in session "C1Po1C: Components II: Cold Compressors & Expanders")

C1Po1D-01: Commissioning of the cryogenic distribution system of the ESS superconducting linac (in session "C1Po1D: Large Scale I: Cryogenic Operations and Commissioning")

C1Po1D-02: Commissioning results for the MITICA cryogenic plant project (in session "C1Po1D: Large Scale I: Cryogenic Operations and Commissioning")

C1Po1D-04: Integration of a new Cryogenic Liquefier into the IB-1 Cryogenic Test Facility (in session "C1Po1D: Large Scale I: Cryogenic Operations and Commissioning")

C1Po1E-01: Design of the Cryogenic Moderator System for the Second Target Station (in session "C1Po1E: Large Scale II: Cryogenic Moderators")

C1Po1E-02: Preparing the Cryogenic Moderator System (CMS) at SNS for higher beam power (in session "C1Po1E: Large Scale II: Cryogenic Moderators")

C1Po1E-03: Spallation Neutron Source Reliability Improvement Projects for the Cryogenic Moderator System (in session "C1Po1E: Large Scale II: Cryogenic Moderators")

C1Po1E-04: Development status of the in-situ measurement system for ortho-to-parahydrogen fractions for the ESS cryogenic moderator system (in session "C1Po1E: Large Scale II: Cryogenic Moderators")

C1Po1E-05: Presentation of the commissioning and testing of the hydrogen cryostat of the cryogenic moderator system at the ZEA-1 (Forschungszentrum Jülich) for the European Spallation Source ESS (in session "C1Po1E: Large Scale II: Cryogenic Moderators")

C1Po1E-06: Liquid Deuterium Cold Source Concept for the NIST Neutron Source (in session "C1Po1E: Large Scale II: Cryogenic Moderators")

C1Po1F-02: Fermilab SSR1 and HB650 synoptic and EPICS Remote cryogenic control system (in session "C1Po1F: Instrumentation, Visualization, and Controls I")

C1Po1F-03: Design, Development and Commissioning of the Control System for the cryogenic distribution system at ESS (in session "C1Po1F: Instrumentation, Visualization, and Controls I")

C1Po1F-04: Updating the Thermal Vacuum Chambers at the NASA Johnson Space Center (in session "C1Po1F: Instrumentation, Visualization, and Controls I")

C1Po1F-05: Numerical analysis of PID control for isothermal demagnetization at 100mK in a three-stage ADR (in session "C1Po1F: Instrumentation, Visualization, and Controls I")

C1Po1F-06: Presentation of the ZEA-1 cryostat control and measurement system architecture (in session "C1Po1F: Instrumentation, Visualization, and Controls I")

C1Po1F-07: Control system based on EPICS for cryogenic distribution system of RAON SCL3 (in session "C1Po1F: Instrumentation, Visualization, and Controls I")

C1Po1F-08: Cool-down logic for cryogenic distribution system of RAON SCL3 (in session "C1Po1F: Instrumentation, Visualization, and Controls I")

C1Po2A-01: Development of a cryogenic stepping motor using high-purity copper wire (in session "C1Po2A: Aerospace Applications I: Devices")

C1Po2A-02: Overview of GTL’s composite cryotank development (in session "C1Po2A: Aerospace Applications I: Devices")

C1Po2A-03: Experimental investigation of fast chill-down performance in cryogenic transfer lines using wire coil inserts (in session "C1Po2A: Aerospace Applications I: Devices")

C1Po2A-04: The Simulation and Experiments of A High Frequency Single Stage Pulse Tube Cryocooler with Two Cooled Sinks (in session "C1Po2A: Aerospace Applications I: Devices")

C1Po2A-05: Design and Optimization of a High Frequency Miniature Pulse Tube Cryocooler (in session "C1Po2A: Aerospace Applications I: Devices")

C1Po2A-06: Development of a 35K single-stage coaxial pulse tube cryocooler (in session "C1Po2A: Aerospace Applications I: Devices")

C1Po2A-07: Dynamic Loading Capacity Test System of Thrust Gas Bearing of Cryogenic Turbo Expander (in session "C1Po2A: Aerospace Applications I: Devices")

C1Po2A-08: Using mylar-insulated cryopumping panels to improve vacuum level during warm temperature testing at JSC’s large thermal vacuum facilities (in session "C1Po2A: Aerospace Applications I: Devices")

C1Po2B-01: Experimental study of the influence of cold head displacement on single-stage Gifford-McMahon cryocooler system performance (in session "C1Po2B: Non-Aerospace Coolers I: GM and JT Coolers")

C1Po2B-02: Helium and Nitrogen Zero Boil-off System for Superconducting Magnets (in session "C1Po2B: Non-Aerospace Coolers I: GM and JT Coolers")

C1Po2B-03: Development of non-flammable mixed refrigerant Joule-Thomson refrigerator for semiconductor etching process (in session "C1Po2B: Non-Aerospace Coolers I: GM and JT Coolers")

C1Po2B-04: Thermal analysis and numerical simulation of 4 K J-T cryocooler equipped with an ejector (in session "C1Po2B: Non-Aerospace Coolers I: GM and JT Coolers")

C1Po2C-01: Design of 10 L/s liquid hydrogen pump with integrated inducer and centrifugal impeller (in session "C1Po2C: Components III: Pumps and Motors")

C1Po2C-02: Influence of key parameters on the suction valve’s backflow volume in liquid hydrogen piston pump (in session "C1Po2C: Components III: Pumps and Motors")

C1Po2C-03: Theoretical power consumption analysis of pressurization process of reciprocating liquid hydrogen piston pump (in session "C1Po2C: Components III: Pumps and Motors")

C1Po2C-04: Development of a dual flow transfer system with a centrifugal pump for liquid helium (in session "C1Po2C: Components III: Pumps and Motors")

C1Po2C-05: Performance modeling and test of an electrical induction motor at cryogenic temperature (in session "C1Po2C: Components III: Pumps and Motors")

C1Po2C-06: Numerical analysis of the performance of the inlet valve in a liquid hydrogen pump (in session "C1Po2C: Components III: Pumps and Motors")

C1Po2D-01: Cryogenic infrastructure upgrade for crab cavities validation at TRIUMF (in session "C1Po2D: Large Scale IV: Cryogenic Test Facility Design")

C1Po2D-02: Approach to achieving ‘Fast Cool-Down” for PIP-II High Beta SRF cavities during vertical tests at the UKRI-STFC Daresbury Laboratory (in session "C1Po2D: Large Scale IV: Cryogenic Test Facility Design")

C1Po2D-05: Cryogenic and safety design of the future High Field Cable Test Facility at Fermilab (in session "C1Po2D: Large Scale IV: Cryogenic Test Facility Design")

C1Po2D-06: Mechanical and Process Design of the Interface to a 20,000 Liter Liquid Helium Dewar (in session "C1Po2D: Large Scale IV: Cryogenic Test Facility Design")

C1Po2D-07: Cryostat Design for an FEL SCU Demonstrator (in session "C1Po2D: Large Scale IV: Cryogenic Test Facility Design")

C1Po2D-08: Installation, commissioning, and testing of the HB650 CM at PIP2IT (in session "C1Po2D: Large Scale IV: Cryogenic Test Facility Design")

C2Or2A-01: An Efficient, Low-Vibration Reliquefier for NMR Spectroscopy Applications (in session "C2Or2A: Non-Aerospace Coolers III: 4K and Sub Kelvin")

C2Or2A-02: 2K J-T cooler for quantum detection: emphasis on the Stirling-type pulse tube pre-cooler (in session "C2Or2A: Non-Aerospace Coolers III: 4K and Sub Kelvin")

C2Or2A-03: Implementation and testing of a 100 mK ADR cryocooler backed by a 4He/3He sorption fridge for CMB-S4 project (in session "C2Or2A: Non-Aerospace Coolers III: 4K and Sub Kelvin")

C2Or2A-04: Thermodynamic analysis of gas-coupled GM/JT hybrid helium liquefaction systems (in session "C2Or2A: Non-Aerospace Coolers III: 4K and Sub Kelvin")

C2Or2A-05: Withdrawn (in session "C2Or2A: Non-Aerospace Coolers III: 4K and Sub Kelvin")

C2Or2A-06: A 4He sub-Kelvin adsorption refrigerator (in session "C2Or2A: Non-Aerospace Coolers III: 4K and Sub Kelvin")

C2Or2B-01: Bio-LNG cooling of a high power density induction electromotor for electric aircraft propulsion (in session "C2Or2B: Aerospace Applications II: Aircraft")

C2Or2B-02: Cooling method for the rotor of a superconducting motor (in session "C2Or2B: Aerospace Applications II: Aircraft")

C2Or2B-03: Development of additively manufactured cryogenic heat exchangers for hydrogen-electric aircraft propulsion (in session "C2Or2B: Aerospace Applications II: Aircraft")

C2Or2B-04: Withdrawn (in session "C2Or2B: Aerospace Applications II: Aircraft")

C2Or2C-01: A Continuous Flow Boiling Curve in the Heating Configuration Based on New Cryogenic Universal Correlations (in session "C2Or2C: Thermophysics IV: Fluid & Transport Properties")

C2Or2C-02: Parametric Analysis of the Charge-Hold-Vent Method for Cryogenic Propellant Tank Chill Down (in session "C2Or2C: Thermophysics IV: Fluid & Transport Properties")

C2Or2C-03: Validation of Universal Cryogenic Flow Boiling Correlations in Thermal Desktop for Liquid Helium (in session "C2Or2C: Thermophysics IV: Fluid & Transport Properties")

C2Or2C-04: Modified 3-omega conductivity technique to allow measurements of thermal conductivity in fluids (in session "C2Or2C: Thermophysics IV: Fluid & Transport Properties")

C2Or2C-05: Critical Heat Flux of Liquid Hydrogen, Liquid Methane, and Liquid Oxygen: A Review of Available Data and Predictive Tools (in session "C2Or2C: Thermophysics IV: Fluid & Transport Properties")

C2Or2C-06: Generalization of pulse tube cooler characteristics from the aspects of thermodynamics, acoustics and fluid dynamics (in session "C2Or2C: Thermophysics IV: Fluid & Transport Properties")

C2Or2C-07: Observation and analysis of the ultra-rapid cooling effect of cryoprotectant droplets on a sapphire surface (in session "C2Or2C: Thermophysics IV: Fluid & Transport Properties")

C2Or3A-01: Rapid cooldown of cryostats using dynamic acoustic impedance matching in pulse tube refrigerators (in session "C2Or3A: Non-Aerospace Coolers V: GM and Pulse Tube Coolers")

C2Or3A-02: Cooling power analysis of a small scale 4 K pulse tube cryocooler driven by an oil-free low input power Helium compressor (in session "C2Or3A: Non-Aerospace Coolers V: GM and Pulse Tube Coolers")

C2Or3A-03: Development of a 5 W/4.2 K two-stage pulse tube cryocooler (in session "C2Or3A: Non-Aerospace Coolers V: GM and Pulse Tube Coolers")

C2Or3A-04: High efficiency operation of a 4K-Gifford-McMahon cryocooler without rotary valve with a metal bellows compressor (in session "C2Or3A: Non-Aerospace Coolers V: GM and Pulse Tube Coolers")

C2Or3A-05: Performance Test of a Light-Weight Linear Stirling Cooler with Active Vibration Controller (in session "C2Or3A: Non-Aerospace Coolers V: GM and Pulse Tube Coolers")

C2Or3A-06: Advances in Pulse Tube Cooler with Dual-opposed Ambient Displacers (in session "C2Or3A: Non-Aerospace Coolers V: GM and Pulse Tube Coolers")

C2Or3A-07: Experimental optimization of GM cryocooler operating horizontally in liquid helium temperature zone (in session "C2Or3A: Non-Aerospace Coolers V: GM and Pulse Tube Coolers")

C2Or3B-01: Small-Scale Industrial Hydrogen Liquefaction (in session "C2Or3B: Hydrogen III: Liquefaction and Testing")

C2Or3B-02: Development of an economic lab-scale hydrogen liquefier system (in session "C2Or3B: Hydrogen III: Liquefaction and Testing")

C2Or3B-03: Development and Demonstration of Mobile Hydrogen Liquefaction and Storage System (in session "C2Or3B: Hydrogen III: Liquefaction and Testing")

C2Or3B-04: Compact cryogenic hydrogen test environment for small devices and material characterization (in session "C2Or3B: Hydrogen III: Liquefaction and Testing")

C2Or3B-05: Ortho-parahydrogen catalyst test facility (in session "C2Or3B: Hydrogen III: Liquefaction and Testing")

C2Or3B-06: Magnetic field acceleration of catalyzed para- to orthohydrogen conversion (in session "C2Or3B: Hydrogen III: Liquefaction and Testing")

C2Or3C-01: [Invited] Design, Configuration and Thermal Optimization of Advanced Cryostats (in session "C2Or3C: Miscellaneous II")

C2Or3C-02: Development of a measurement system to measure in-situ the ortho/para concentration of liquid hydrogen (in session "C2Or3C: Miscellaneous II")

C2Or3C-03: Cryopump concept development for the cryogenic mirror region of the Einstein Telescope – the future gravitational wave observatory (in session "C2Or3C: Miscellaneous II")

C2Or3C-04: Temperature-dependent quantum dot fluorescence spectra measurement based on a micro-machined Joule-Thomson cooler (in session "C2Or3C: Miscellaneous II")

C2Or3C-05: Cryogenic Modules for Synergistic O2 Generation and CO2 Retention in Closed-Circuit Escape Respirators (in session "C2Or3C: Miscellaneous II")

C2Or3C-06: Initiation and suppression of Taconis oscillations in tubes with junctions and variable-diameter tube segments (in session "C2Or3C: Miscellaneous II")

C2Or3D-01: Design considerations of the SPARC cryogenic system (in session "C2Or3D: Large Scale VIII: Helium Cryogenic Test Facilities and Systems")

C2Or3D-02: Overview and status of the PIP-II cryogenic system (in session "C2Or3D: Large Scale VIII: Helium Cryogenic Test Facilities and Systems")

C2Or3D-03: Status of the MINERVA cryomodules and associated cryogenic system (MYRRHA phase 1) (in session "C2Or3D: Large Scale VIII: Helium Cryogenic Test Facilities and Systems")

C2Or3D-04: NSLS-II cryogenic system problems and solutions (in session "C2Or3D: Large Scale VIII: Helium Cryogenic Test Facilities and Systems")

C2Or3D-05: Start-up of SLAC 2K cold compressors train (in session "C2Or3D: Large Scale VIII: Helium Cryogenic Test Facilities and Systems")

C2Or3D-06: Characterization of centrifugal compressors operating in FRIB’s sub-atmospheric compression system (in session "C2Or3D: Large Scale VIII: Helium Cryogenic Test Facilities and Systems")

C2Po1A-01: Optimal Leveraging of Gifford McMahon Cryocooler’s Regenerative Cooling Power for SNSPD Applications (in session "C2Po1A: Superconducting III: Quantum Systems")

C2Po1A-02: Technical solutions and efficiencies for large size dilution refrigerator precooling (in session "C2Po1A: Superconducting III: Quantum Systems")

C2Po1A-03: Cryogenic plant integration for the Colossus milli-Kelvin platform at Fermilab (in session "C2Po1A: Superconducting III: Quantum Systems")

C2Po1A-04: Helium-3 Piping and Gas Handling Implementation for Colossus (in session "C2Po1A: Superconducting III: Quantum Systems")

C2Po1B-04: An HTS Multiplexer Based on Common-coupled Resonator (in session "C2Po1B: Superconducting IV: Cryogenic System Applications")

C2Po1B-05: A novel HTS dual-band bandpass filter using quadruple-mode resonator (in session "C2Po1B: Superconducting IV: Cryogenic System Applications")

C2Po1B-06: Thermal simulation and analysis of a FEL SCU cryostat (in session "C2Po1B: Superconducting IV: Cryogenic System Applications")

C2Po1B-09: Investigation of Levitation Force for Attractive Magnetic Levitation Train using HTS Bulk (in session "C2Po1B: Superconducting IV: Cryogenic System Applications")

C2Po1B-10: Cryogenics design of a compact, cryocooler conduction-cooled SRF accelerator for e-beam production (in session "C2Po1B: Superconducting IV: Cryogenic System Applications")

C2Po1C-01: Thermodynamic and exergetic evaluation of CO2 liquefaction for ship transport (in session "C2Po1C: Large Scale Refrigeration / Liquefaction II")

C2Po1C-04: Compressed air supply system based on cryogenic energy storage (in session "C2Po1C: Large Scale Refrigeration / Liquefaction II")

C2Po1C-05: Proposed Gas Refrigeration Cycles for Forced-Flow Cooling of High-Field Magnet Systems at 20 K (in session "C2Po1C: Large Scale Refrigeration / Liquefaction II")

C2Po1C-07: Spallation Neutron Source Purifier Replacement Project for the Central Helium Liquefier (in session "C2Po1C: Large Scale Refrigeration / Liquefaction II")

C2Po1C-08: Design of Muon Campus full flow purifier for varying operational conditions and horizontal shipping (in session "C2Po1C: Large Scale Refrigeration / Liquefaction II")

C2Po1C-09: Design and refurbishment of End Station Refrigerator 2 at JLab (in session "C2Po1C: Large Scale Refrigeration / Liquefaction II")

C2Po1D-01: Experimental Study of Two-phase Transition cryogenic Cooling of Aluminum Conductors for Single Stator Slot Tests (in session "C2Po1D: Thermophysics III: Numerical Studies")

C2Po1D-02: Thermomechanical optimization of actively cooled thermal shield in PIP II Cryogenic Distribution System (in session "C2Po1D: Thermophysics III: Numerical Studies")

C2Po1D-03: Exergy Analysis and Improvement of Helium Internal Purifier (in session "C2Po1D: Thermophysics III: Numerical Studies")

C2Po1D-04: Numerical simulation of gas-liquid two-phase flow in four-turn helium-based pulsating heat pipe (in session "C2Po1D: Thermophysics III: Numerical Studies")

C2Po1D-05: Grand canonical monte carlo simulation of helium adsorption in MOF-5 (in session "C2Po1D: Thermophysics III: Numerical Studies")

C2Po1D-06: Modeling of Condensation in the Presence of Noncondensables in GFSSP (in session "C2Po1D: Thermophysics III: Numerical Studies")

C2Po1E-01: Numerical investigation on the performance of a new type of perforated-serrated fin for plate-fin heat exchanger in helium cryogenic system (in session "C2Po1E: Components IV: Heat Exchangers")

C2Po1E-02: Numerical study of the heat transfer characteristics of recuperative heat exchangers under intermittent alternating flow (in session "C2Po1E: Components IV: Heat Exchangers")

C2Po1E-03: Development of a metal 3D printed air foil heat sink for cryocoolers (in session "C2Po1E: Components IV: Heat Exchangers")

C2Po1E-06: Influence of the heat exchanger form and phase change for zero boil off tank (in session "C2Po1E: Components IV: Heat Exchangers")

C2Po1E-09: Novel thermal switch design and performance test for the cryogenic devices (in session "C2Po1E: Components IV: Heat Exchangers")

C2Po1E-10: The Study of Active Gas-gap Heat Switch Using Carbon Nanotubes as the Adsorption Material (in session "C2Po1E: Components IV: Heat Exchangers")

C2Po1F-01: Flow rate optimization for a small liquid argon system at Fermilab. (in session "C2Po1F: Miscellaneous I")

C2Po1F-02: Design Improvements in Liquid Argon Purification Techniques in DUNE Cold Electronics Test Cryostat (in session "C2Po1F: Miscellaneous I")

C2Po1F-03: Development of a research cryostat for direct thermoacoustic cooling and conversion of hydrogen (in session "C2Po1F: Miscellaneous I")

C2Po1F-04: Leidenfrost dynamics of a LN2 droplet inside an immisible liquid pool (in session "C2Po1F: Miscellaneous I")

C2Po1F-06: Experimental study on single-stage adiabatic demagnetization refrigerator (ADR) with Chromium Potassium Alum (CPA) (in session "C2Po1F: Miscellaneous I")

C2Po1F-07: Thermal conductivity measurements for additively manufactured AlSi10Mg and Al6061-RAM2 aluminum composites at cryogenic temperatures (in session "C2Po1F: Miscellaneous I")

C2Po1F-08: High accuracy resistivity and temperature coefficient measurements of Invar from 4 to 300 K (in session "C2Po1F: Miscellaneous I")

C2Po1F-09: An innovative cryogenic system for cooling superconducting wind turbine electrical generators (in session "C2Po1F: Miscellaneous I")

C2Po2A-01: Six years’ experience of the XFEL 2K operation (in session "C2Po2A: Large Scale V: Cryogenic Safety Relief Analysis")

C2Po2A-02: Spallation Neutron Source Hydrogen Relief Analysis for the Cryogenic Moderator System (in session "C2Po2A: Large Scale V: Cryogenic Safety Relief Analysis")

C2Po2A-03: Pressure safety approach for the PIP-II Cryogenic Distribution System and cryomodules (in session "C2Po2A: Large Scale V: Cryogenic Safety Relief Analysis")

C2Po2B-01: Design and development of vehicle cryo-compressed hydrogen storage vessel (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-02: Model establishment and process analysis of liquid hydrogen energy storage (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-03: Uncertainty analysis of Raman spectra for measuring ortho-parahydrogen compositions (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-04: The design and development of the cryogenic compressed gas refueling system (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-05: Tuning hydrogen boil off via inert gas insulation purge in a vapor cool shielded fuel tank (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-06: Study on the factors influencing the catalytic performance of Ortho-Para hydrogen catalysts (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-07: Pressure and boil-off gas management of liquid hydrogen storage onboard maritime carriers for export (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-08: Cryostat for arbitrary ortho-parahydrogen reference mixtures (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-09: Design and construction of 1,300 L zero-boil off (ZBO) liquid hydrogen storage tank (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2B-10: Best Safety Practices in Liquid Hydrogen Infrastructure and Fueling (in session "C2Po2B: Hydrogen II: Vessel Design & Testing")

C2Po2C-02: Design to Cryogenic System for Dilution Refrigerator with Cavity and Superconducting Magnet (in session "C2Po2C: Non-Aerospace Coolers IV: Dilution and ADR")

C2Po2C-03: Design and performance of the JT component of dry dilution refrigerator (in session "C2Po2C: Non-Aerospace Coolers IV: Dilution and ADR")

C2Po2D-01: Development of the Liquid Nitrogen Cooling system for Cryogenic Permanent-Magnet Undulator at NSRRC (in session "C2Po2D: Large Scale VI: Liquid Nitrogen Systems")

C2Po2D-03: Design of GRETA cooling systems (in session "C2Po2D: Large Scale VI: Liquid Nitrogen Systems")

C2Po2E-05: Dynamic simulation of CHL at SNS (in session "C2Po2E: Large Scale VII: Refrigeration Simulation")

C2Po2E-06: Co-simulation of cool down process from 300 to 80 K for ITER Tokamak (in session "C2Po2E: Large Scale VII: Refrigeration Simulation")

C2Po2E-07: Simulation and optimization of reliquefication refrigerator for cryogenic liquid (in session "C2Po2E: Large Scale VII: Refrigeration Simulation")

C3Or2A-01: Transient Liquefaction on the Lunar or Martian Surface Operational Demonstration (in session "C3Or2A: Aerospace Applications III: In-Space Fluids Systems")

C3Or2A-02: Thermal Modeling of CryoFILL liquefaction tests (in session "C3Or2A: Aerospace Applications III: In-Space Fluids Systems")

C3Or2A-03: A liquefaction model for a cryogenically refrigerated ellipsoidal tank (in session "C3Or2A: Aerospace Applications III: In-Space Fluids Systems")

C3Or2A-04: Benchmark performance metrics of a vane propellant management device for a 0.15 m3 liquid hydrogen tank (in session "C3Or2A: Aerospace Applications III: In-Space Fluids Systems")

C3Or2A-05: Onboard cryogenic propellant subcooler for launch vehicles using Joule-Thomson Device (in session "C3Or2A: Aerospace Applications III: In-Space Fluids Systems")

C3Or2A-06: Ground-based Cryogenic Leak Test of Fittings for Cryogenic Fluid Management (in session "C3Or2A: Aerospace Applications III: In-Space Fluids Systems")

C3Or2B-01: [Invited] Assessment of Helium Management during Commissioning and Operations of MPEX Magnet System (in session "C3Or2B: Superconducting V: Accelerator Magnet Systems")

C3Or2B-02: A Retrospective on how Cryostats have changed with Cryostat Use and the Cooling Methods used to keep Superconducting Magnets and Devices Cold (in session "C3Or2B: Superconducting V: Accelerator Magnet Systems")

C3Or2B-03: Development of beyond state-of-the-art cryostat for the linear accelerator HELIAC of GSI (in session "C3Or2B: Superconducting V: Accelerator Magnet Systems")

C3Or2B-04: Reengineering the RHIC superconducting magnet current leads for EIC (in session "C3Or2B: Superconducting V: Accelerator Magnet Systems")

C3Or2C-01: Results of a nitrogen-based pulsating heat pipe with varied configurations (in session "C3Or2C: Components VI: Pulsating Heat Pipes")

C3Or2C-02: Withdrawn (in session "C3Or2C: Components VI: Pulsating Heat Pipes")

C3Or2C-03: Experimental results of long-distance helium pulsating heat pipes with varying adiabatic length, fill ratio, and applied heat load (in session "C3Or2C: Components VI: Pulsating Heat Pipes")

C3Or2C-04: Neon pulsating heat pipe with innovative flexible evaporator to facilitate cryocooling of superconducting devices (in session "C3Or2C: Components VI: Pulsating Heat Pipes")

C3Or2D-01: Investigations on the throttling process of helium-3 in a cryogen-free dilution refrigerator (in session "C3Or2D: Non-Aerospace Coolers VII: Cryogen Free Dilution Refrigerators")

C3Or2D-02: Design and optimization of the sintered heat exchanger in the cryogen-free dilution refrigerator (in session "C3Or2D: Non-Aerospace Coolers VII: Cryogen Free Dilution Refrigerators")

C3Or2D-03: Investigation of helium gas-gap heat switch for the cryogen-free dilution refrigerator (in session "C3Or2D: Non-Aerospace Coolers VII: Cryogen Free Dilution Refrigerators")

C3Or2D-04: Numerical Modelling of Thermoacoustic Stirling Engines & Refrigerators (in session "C3Or2D: Non-Aerospace Coolers VII: Cryogen Free Dilution Refrigerators")

C3Or3A-01: [Invited] Loss of insulation vacuum tests on an EuXFEL-like cryomodule (in session "C3Or3A: Large Scale Refrigeration Operations and Commissioning")

C3Or3A-02: First results of the cryogenics operation for the LHC physics run 3 at the increased energy to 6.8 TeV (in session "C3Or3A: Large Scale Refrigeration Operations and Commissioning")

C3Or3A-03: The first cooldown of SCL3 cryogenic system (in session "C3Or3A: Large Scale Refrigeration Operations and Commissioning")

C3Or3A-04: [Invited] Commissioning of the ESS large-scale 20 K helium refrigeration system for the cryogenic moderator system (in session "C3Or3A: Large Scale Refrigeration Operations and Commissioning")

C3Or3A-05: LCLS-II Helium Refrigeration System Commissioning Results (in session "C3Or3A: Large Scale Refrigeration Operations and Commissioning")

C3Or3A-06: LCLS-II Linear Accelerator Cool-Down And Pump-Down (in session "C3Or3A: Large Scale Refrigeration Operations and Commissioning")

C3Or3B-01: LH2 testing of GTL's ultra-lightweight composite dewar-tank (in session "C3Or3B: Hydrogen IV: Vessel Design and Testing")

C3Or3B-02: Filling ratio dependence of time variation of pressure inside liquid hydrogen tank (in session "C3Or3B: Hydrogen IV: Vessel Design and Testing")

C3Or3B-03: Hydrogen Permeability Testing of Fibre Reinforced Thermoplastics under Cryogenic Conditions – Validation of a Test Rig Concept (in session "C3Or3B: Hydrogen IV: Vessel Design and Testing")

C3Or3B-04: Assessment of Insulation Systems for Aircraft Liquid Hydrogen Tanks (in session "C3Or3B: Hydrogen IV: Vessel Design and Testing")

C3Or3B-05: Effects of throttle and heater input for reducing pressure surging in a liquid hydrogen tank pressurizer (in session "C3Or3B: Hydrogen IV: Vessel Design and Testing")

C3Or3B-06: Experimental and numerical investigations on depressurization process in a large liquefied hydrogen tank (in session "C3Or3B: Hydrogen IV: Vessel Design and Testing")

C3Or3B-07: Withdrawn (in session "C3Or3B: Hydrogen IV: Vessel Design and Testing")

C3Or3C-01: Withdrawn (in session "C3Or3C: Instrumentation, Visualization, and Controls III")

C3Or3C-02: In-situ, high-spatial resolution temperature measurement of liquid oxygen tank under liquefaction via fiber optics sensing system (in session "C3Or3C: Instrumentation, Visualization, and Controls III")

C3Or3C-03: LCLS-II Cryogenic System Instrumentation (in session "C3Or3C: Instrumentation, Visualization, and Controls III")

C3Or3C-04: LCLS-II Helium Refrigeration System Automation (in session "C3Or3C: Instrumentation, Visualization, and Controls III")

C3Or3C-05: Capacitance based measurement of volume fraction, velocity, and mass flow rate of cryogenic nitrogen 2-phase flow (in session "C3Or3C: Instrumentation, Visualization, and Controls III")

C3Or3C-06: Research on measurement characteristics and structure optimization of U-tube Coriolis mass flowmeter with liquid hydrogen (in session "C3Or3C: Instrumentation, Visualization, and Controls III")

C3Or3D-01: Einstein Telescope PathFinder Cooling System Architecture and Design (in session "C3Or3D: Aerospace Applications IV: Space")

C3Or3D-02: Low-noise thermal shielding around the cryogenic payloads in the Einstein Telescope (in session "C3Or3D: Aerospace Applications IV: Space")

C3Or3D-03: Conceptual cryostat design for cryogenic payload suspension studies for the Einstein Telescope (in session "C3Or3D: Aerospace Applications IV: Space")

C3Or3D-04: SPHEREx payload thermal architecture and analysis (in session "C3Or3D: Aerospace Applications IV: Space")

C3Or3D-05: Thermal design of the High-Volatiles and Minerals Moon Mapper (HVM3) Instrument on the Lunar Trailblazer Mission (LTB) (in session "C3Or3D: Aerospace Applications IV: Space")

C3Or4A-01: Hermetic wall material optimization on a heat switch used for ADR application (in session "C3Or4A: Aerospace Coolers I: Sub-2 Kelvin")

C3Or4A-02: A vanadium superconducting heat switch for very low temperatures (in session "C3Or4A: Aerospace Coolers I: Sub-2 Kelvin")

C3Or4A-03: Finding a low temperature leak (in session "C3Or4A: Aerospace Coolers I: Sub-2 Kelvin")

C3Or4B-01: Nitrogen Precooling Heat Exchanger replacement and control system upgrade in Superfluid Cryoplant at CMTF (in session "C3Or4B: Components VII: Cryogenic Heat Exchangers")

C3Or4B-02: Withdrawn (in session "C3Or4B: Components VII: Cryogenic Heat Exchangers")

C3Or4B-03: A high effective meso-scale helical-tube-bundle recuperator spanning from 300 K to 30 K (in session "C3Or4B: Components VII: Cryogenic Heat Exchangers")

C3Or4B-04: Withdrawn (in session "C3Or4B: Components VII: Cryogenic Heat Exchangers")

C3Or4B-05: Discussions of real gas effects on the regenerative refrigerators (in session "C3Or4B: Components VII: Cryogenic Heat Exchangers")

C3Or4C-01: ITER Complex Cryolines installation System – Features, challenges and status (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4C-02: The final design and manufacturing of cryogenic valve boxes for ITER (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4C-03: ITER Roughing Pump System Cryogenic System Overview (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4C-04: Methodology of designing a support system for cryogenic pipelines in multi-channel vacuum insulated transfer lines (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4C-05: Cryogenic Distribution System for Polish Free Electron Laser Facility (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4C-06: Current status of main distribution box for Korean heavy ion accelerator, RAON (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4C-07: Cryogenic Distribution System for SIS100 at FAIR@GSI (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4C-08: Overview and status of the Long-Baseline Neutrino Facility Far Detectors cryogenics system (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4C-09: Withdrawn (in session "C3Or4C: Large Scale V: Transfer Lines and Distribution Systems")

C3Or4D-01: [Invited] Tipping Point flight demonstration - United Launch Alliance (in session "C3Or4D: Special Session: Orbital Flight Demonstrations of Cryogenic Fluid Management")

C3Or4D-02: [Invited] Orbital Cryogenic Storage and Transfer Demonstration Using LOXSAT (in session "C3Or4D: Special Session: Orbital Flight Demonstrations of Cryogenic Fluid Management")

C3Or4D-03: [Invited] NASA Cryogenic Fluid Management Flight Demonstration Summary: Lockheed Martin 2020 Tipping Point (in session "C3Or4D: Special Session: Orbital Flight Demonstrations of Cryogenic Fluid Management")

C3Or4D-04: [Invited] NASA Cryogenic Fluid Management Flight Demonstration Summary: SpaceX 2020 Tipping Point (in session "C3Or4D: Special Session: Orbital Flight Demonstrations of Cryogenic Fluid Management")

C3PL1-01: Overview of the fabrication of cryogenic hydrogen fuel ice layer for nuclear fusion ignition experiments (in session "CEC Plenary: Suhas Bhandarkar, Lawrence Livermore National Laboratory")

C3Po1A-01: The Study and Improvement of Pressure Degradation of Helium Cryogenic System at NSRRC (in session "C3Po1A: Large Scale Refrigeration / Liquefaction III")

C3Po1A-03: Cryogenic testing of molecular sieve materials for use in hydrogen liquefaction (in session "C3Po1A: Large Scale Refrigeration / Liquefaction III")

C3Po1A-04: Reliability analysis of a 2500W@4.5K/500W@2K helium cryogenic refrigeration system (in session "C3Po1A: Large Scale Refrigeration / Liquefaction III")

C3Po1A-05: Effect of a thermal fluctuation caused by a proton beam injection on the ESS large-scale 20 K helium refrigeration system (in session "C3Po1A: Large Scale Refrigeration / Liquefaction III")

C3Po1A-06: Improving the precooling efficiency of the cryogenic compressed hydrogen with the temperature-distributed refrigeration method (in session "C3Po1A: Large Scale Refrigeration / Liquefaction III")

C3Po1B-03: Development of reverse-Brayton refrigeration system with scroll compressor package (in session "C3Po1B: Large Scale Refrigeration / Liquefaction IV")

C3Po1B-04: Development of an 18 kW@4.5 K & 4 kW@2 K Helium Refrigerator (in session "C3Po1B: Large Scale Refrigeration / Liquefaction IV")

C3Po1B-05: Study of operational modes of cool-down and warm-up processes for the ESS large-scale 20 K helium refrigeration system (in session "C3Po1B: Large Scale Refrigeration / Liquefaction IV")

C3Po1B-06: Development of a Portable Stand-Alone 20 K Brayton Cycle Helium Refrigeration System (in session "C3Po1B: Large Scale Refrigeration / Liquefaction IV")

C3Po1B-07: Upgrading the Helium Cryogenic Plant at NSLS-II (in session "C3Po1B: Large Scale Refrigeration / Liquefaction IV")

C3Po1B-08: Analysis of the PIPII cryoplant integrated operational modes (in session "C3Po1B: Large Scale Refrigeration / Liquefaction IV")

C3Po1C-04: The development and performance of superconducting magnetic separation water treatment technology (in session "C3Po1C: Cryogenic Systems for Superconducting Magnets")

C3Po1C-06: Thermal conductivity of impregnation with ionic liquids for conduction cooled superconducting coil (in session "C3Po1C: Cryogenic Systems for Superconducting Magnets")

C3Po1C-07: High-gradient magnetic separation for wastewater treatment based on direct-conduction cooling superconducting magnets with large diameter, room temperature aperture (in session "C3Po1C: Cryogenic Systems for Superconducting Magnets")

C3Po1C-08: Design and experiment of Inclined labyrinth seal for transferring cryogenic fluids to rotating superconducting machines (in session "C3Po1C: Cryogenic Systems for Superconducting Magnets")

C3Po1C-09 (moved from C1Po1A-06): Thermal modeling of low temperature devices (in session "C3Po1C: Cryogenic Systems for Superconducting Magnets")

C3Po1D-02: Study on heat transfer characteristics of regenerator under different Valensi numbers (in session "C3Po1D: Non-Aerospace Coolers VI: Stirling and Pulse Tube Coolers")

C3Po1D-03: The investigation of a multi-bypass structure on the pulse tube refrigerator through the finite volume method (in session "C3Po1D: Non-Aerospace Coolers VI: Stirling and Pulse Tube Coolers")

C3Po1D-04: Numerical study on two-stage Stirling cryocooler with a long second expansion space (in session "C3Po1D: Non-Aerospace Coolers VI: Stirling and Pulse Tube Coolers")

C3Po1D-05: Study on the thermal coupling structure of cryogenic liquid ZBO storage system cooled by a high-frequency pulse tube cryocooler (in session "C3Po1D: Non-Aerospace Coolers VI: Stirling and Pulse Tube Coolers")

C3Po1D-06: Study on a 20 K two-stage thermally-coupled pulse tube cooler with independent ambient displacers (in session "C3Po1D: Non-Aerospace Coolers VI: Stirling and Pulse Tube Coolers")

C3Po1D-07: Theoretical and experimental study of a three-stage Stirling-type pulse tube refrigerator below 10K (in session "C3Po1D: Non-Aerospace Coolers VI: Stirling and Pulse Tube Coolers")

C3Po1D-08: A three-stage high-frequency pulse tube cryocooler obtaining a low temperature down to 2 K (in session "C3Po1D: Non-Aerospace Coolers VI: Stirling and Pulse Tube Coolers")

C3Po1E-01: Progress on the investigation of the delay in boiling of liquid nitrogen in a capillary channel (in session "C3Po1E: Instrumentation, Visualization, and Controls II")

C3Po1E-02: Development of test rig for optical diagnostics of cryogenic spray. (in session "C3Po1E: Instrumentation, Visualization, and Controls II")

C3Po1E-04: A protocol for accurately calibrating thermocouples at cryogenic temperatures (in session "C3Po1E: Instrumentation, Visualization, and Controls II")

C4Or1A-01: Characterization of thermal properties of OFHC copper at cryogenic temperature (in session "C4Or1A: Thermophysics V: Solid Properties")

C4Or1A-02: Study of the thermal physical properties of insulating materials in a Titan environment (in session "C4Or1A: Thermophysics V: Solid Properties")

C4Or1A-03: Optimization of thermoelectric generator power density for cryogen cold exergy recovery (in session "C4Or1A: Thermophysics V: Solid Properties")

C4Or1A-04: Ice lithography integrated with a micromachined Joule-Thomson cooler (in session "C4Or1A: Thermophysics V: Solid Properties")

C4Or1B-01: Overview of ITER Cryoplant construction and integration phases (in session "C4Or1B: Large Scale Refrigeration / Liquefaction V")

C4Or1B-02: Comparison of liquefaction testing with liquid nitrogen and liquid oxygen (in session "C4Or1B: Large Scale Refrigeration / Liquefaction V")

C4Or1B-03: Two new Helium Refrigerators for the LHC accelerator upgrade (HL-LHC) at CERN; from Concept to Tender (in session "C4Or1B: Large Scale Refrigeration / Liquefaction V")

C4Or1B-04: Process Design for FRIB’s Experimental System Cold Box (in session "C4Or1B: Large Scale Refrigeration / Liquefaction V")

C4Or1C-01: Model Based Exploration of Physical Parameters for Liquid Hydrogen System Insulation Performance (in session "C4Or1C: Hydrogen V: Aerospace Tanks")

C4Or1C-02: Impact of Internal Baffle Designs on Liquid Hydrogen Sloshing in Cryogenic Aircraft Fuel Tanks (in session "C4Or1C: Hydrogen V: Aerospace Tanks")

C4Or1C-03: Vacuum Pump-Down of the Annular Insulation Space for Large Field-Erected Liquid Hydrogen Storage Tanks (in session "C4Or1C: Hydrogen V: Aerospace Tanks")

C4Or1C-04: Liquid Hydrogen tank chill and no-vent fill prediction using computational fluid dynamics (in session "C4Or1C: Hydrogen V: Aerospace Tanks")

C4Or1C-05: Basic design of a cryogenic liquid hydrogen pump and of a laboratory-scale test rig (in session "C4Or1C: Hydrogen V: Aerospace Tanks")

C4Or1D-01: Vibration-Free 40-80K Turbo-Brayton cryocooler and its very high efficiency recuperator for Earth Observation instruments (in session "C4Or1D: Aerospace Coolers III: Electronics and Testing")

C4Or1D-02: Improvement of the two-stage Stirling cooler below 20K (in session "C4Or1D: Aerospace Coolers III: Electronics and Testing")

C4Or1D-03: Characterization Testing of the Northrop Grumman MiniCoolerPlus (MCP) (in session "C4Or1D: Aerospace Coolers III: Electronics and Testing")

C4Or1D-04: Characterization testing of the Air Liquide LPTC (in session "C4Or1D: Aerospace Coolers III: Electronics and Testing")

C4Or1D-05: Characterization testing of the Thales LPT9310-HP (in session "C4Or1D: Aerospace Coolers III: Electronics and Testing")

C4Or1D-06: Ball Low Cost, Low EFT, High Capacity Cryocooling Systems (in session "C4Or1D: Aerospace Coolers III: Electronics and Testing")

C4Or1D-07: Ball Modular Advanced Cryocooler Control Electronics (MACCE) (in session "C4Or1D: Aerospace Coolers III: Electronics and Testing")

C4Or1D-08: Next Generation Space Cryocooler Electronics Products (in session "C4Or1D: Aerospace Coolers III: Electronics and Testing")

J1Or1A-01: [Invited] Additive Manufacturing and hybrid materials in high power density machines for electric propulsion of vehicles (in session "J1Or1A: Joint Session: Liquid Hydrogen for Large-Scale Vehicles I")

J1Or1A-02: [Invited] Raytheon Technologies, Perspectives on Alternate Aviation Fuels (in session "J1Or1A: Joint Session: Liquid Hydrogen for Large-Scale Vehicles I")

J1Or1A-03: [Invited] Liquid Hydrogen Infrastructure and Applications (in session "J1Or1A: Joint Session: Liquid Hydrogen for Large-Scale Vehicles I")

J1Or2B-01: [Invited] Decarbonizing ultra-class haul trucks and the mining ecosystem through utilization of liquid hydrogen (in session "J1Or2B: Joint Session: Liquid Hydrogen for Large-Scale Vehicles II")

J1Or2B-02: [Invited] The Benefits and Challenges with On-board Liquid Hydrogen Storage Systems (in session "J1Or2B: Joint Session: Liquid Hydrogen for Large-Scale Vehicles II")

J1Or2B-03: [Invited] Multi scale systematisation of damage and failure modes of cryogenic composite hydrogen vessels according to the Fault Tree method (in session "J1Or2B: Joint Session: Liquid Hydrogen for Large-Scale Vehicles II")

J4Or1A-01: [Invited] Goldeneye - Large Scale Cryogenics for Next Generation of Superconducting-Based Quantum Computers. (in session "J4Or1A: Joint Session: Superconducting Quantum Systems")

J4Or1A-02: [Invited] An Update on the Colossus mK Platform at Fermilab (in session "J4Or1A: Joint Session: Superconducting Quantum Systems")

J4Or1A-03: Characterizing MEMS Switch Reliability for Cryogenic Applications such as Quantum Computing (in session "J4Or1A: Joint Session: Superconducting Quantum Systems")

J4Or1A-04: Fundamental superconductivity of Nb films for quantum computing application (in session "J4Or1A: Joint Session: Superconducting Quantum Systems")

J4PL1: Cryogenic infrastructure for 400 qubits and beyond (in session "Joint Plenary: Nicholas Masluk, IBM -- sponsored by ICEoxford")

M1Or1A-01: Comparative study between 77 K, self-field Ic and that of in-field and 4.2 K based on high throughput reel-to-reel continuous Ic measurements on a PLD processed long REBCO coated conductor (in session "M1Or1A: REBCO Coated Conductors")

M1Or1A-02: Advances in ultrafast transient liquid assisted growth of YBa2Cu3O7 coated conductors (in session "M1Or1A: REBCO Coated Conductors")

M1Or1A-03: Scanning Raman Spectroscopy for Characterization of REBCO Coated Conductors (in session "M1Or1A: REBCO Coated Conductors")

M1Or1A-04: Jc measurement and current sharing in REBCO coated conductor with Ni stabilizer. (in session "M1Or1A: REBCO Coated Conductors")

M1Or1A-05: Magnetization and flux creep analysis for STAR Coated Conductor cable (in session "M1Or1A: REBCO Coated Conductors")

M1Or1B-01: [Invited] Epitaxial growth and studies of dissimilar materials heterostructures by molecular beam epitaxy (in session "M1Or1B: Special Session: Topological Materials for Electronics I")

M1Or1B-02: [Invited] Spin chirality driven magneto - transport in Mn3Sn and Co3Sn2S2 Kagome magnets (in session "M1Or1B: Special Session: Topological Materials for Electronics I")

M1Or1B-03: [Invited] Real-space screening of bulk topology of high-quality two-dimensional insulators (in session "M1Or1B: Special Session: Topological Materials for Electronics I")

M1Or1C-01: High Heat Capacity Resin for Impregnation of Superconducting Magnets (in session "M1Or1C: Metallic, Ceramic, Composite and Polymeric Materials I")

M1Or1C-02: High-cycle Fatigue Strength of 22Cr-12Ni Austenitic Stainless Steel at 77 K (in session "M1Or1C: Metallic, Ceramic, Composite and Polymeric Materials I")

M1Or1C-03: Cryogenic properties of a nickel based alloy (in session "M1Or1C: Metallic, Ceramic, Composite and Polymeric Materials I")

M1Or1C-04: High purity aluminum in cryogenic motors for electric aircraft (in session "M1Or1C: Metallic, Ceramic, Composite and Polymeric Materials I")

M1Or1C-05: Cryoresistive aluminum-beryllium nanocomposites for aerospace electrical conductors (in session "M1Or1C: Metallic, Ceramic, Composite and Polymeric Materials I")

M1Or1C-06: Minor titanium addition enables novel copper-tantalum composite microstructures (in session "M1Or1C: Metallic, Ceramic, Composite and Polymeric Materials I")

M1Or2C-01: [Invited] Dielectric Strength under Shear Stress of Insulating Materials for Fusion Superconducting Magnet (in session "M1Or2C: Insulation/Conduction, Resin, and Impregnation I")

M1Or2C-02: Performance analysis of insulation materials for LH2 tanks (in session "M1Or2C: Insulation/Conduction, Resin, and Impregnation I")

M1Or2C-03: Cryogenic Thermal Performance of the Vacuum Insulation System for LH2 Storage Tanks (in session "M1Or2C: Insulation/Conduction, Resin, and Impregnation I")

M1Or2C-04: [Invited] Thermal Conductivity and Mechanical Properties of Polymeric Aerogels for Cryogenic Insulation Applications (in session "M1Or2C: Insulation/Conduction, Resin, and Impregnation I")

M1Or2C-05: Optimizing electric field enhancement of HTS cables (in session "M1Or2C: Insulation/Conduction, Resin, and Impregnation I")

M1Or2D-01: [Invited] Terahertz spectroscopy on topological superconductor thin films and heterostructures (in session "M1Or2D: Special Session: Topological Materials for Electronics II")

M1Or2D-02: [Invited] Superconductivity beyond the Pauli limit tuned by locally enhanced Landé g-factor in Au(111)-superconductor heterostructures (in session "M1Or2D: Special Session: Topological Materials for Electronics II")

M1Or3E-01: [Invited] Superconductors as Enabling Technology for Space Transportation (in session "M1Or3E: Superconductors in Space")

M1Or3E-02: [Invited] Space experiments using superconducting magnet technology (in session "M1Or3E: Superconductors in Space")

M1Or3E-03: [Invited] Qualification and test of space compatible superconducting current leads (REBCO) designed for adiabatic demagnetization refrigerators (in session "M1Or3E: Superconductors in Space")

M1Or3E-04: [Invited] Critical current stability of 2G REBCO tape for space-flight HTS leads (in session "M1Or3E: Superconductors in Space")

M1Or3E-05: [Invited] Design, fabrication and test of high temperature superconducting magnet for heat flux and radio blackout mitigation experiments in plasma wind tunnels (in session "M1Or3E: Superconductors in Space")

M1Or3F-01: Developing Advanced Nb3Sn conductors in Hyper Tech (in session "M1Or3F: Nb3Sn, MgB2, BSCCO Wires and Joints")

M1Or3F-02: Persistent-current magnetization of APC Nb3Sn superconducting strands (in session "M1Or3F: Nb3Sn, MgB2, BSCCO Wires and Joints")

M1Or3F-03: Nucleation and Growth of Oxide Nanoparticles in APC Nb3Sn (in session "M1Or3F: Nb3Sn, MgB2, BSCCO Wires and Joints")

M1Or3F-04: Nb3Sn conductors with high specific heat (in session "M1Or3F: Nb3Sn, MgB2, BSCCO Wires and Joints")

M1Or3F-05: Filament area variation in Bi-2212 round wire and its impact on critical current (in session "M1Or3F: Nb3Sn, MgB2, BSCCO Wires and Joints")

M1Or3F-06: High Ic Superconducting Joints Connecting Reinforced Bi2223 Tapes (in session "M1Or3F: Nb3Sn, MgB2, BSCCO Wires and Joints")

M1Or3F-07: Withdrawn (in session "M1Or3F: Nb3Sn, MgB2, BSCCO Wires and Joints")

M1Or3G-01: [Invited] Current Status of National Project for Electric Propulsion System Development of Aircraft using Superconducting Technologies (in session "M1Or3G: Transportation Symposia I: System Level")

M1Or3G-02: [Invited] Integrated Zero Emission Aviation (IZEA) using a robust hybrid architecture (in session "M1Or3G: Transportation Symposia I: System Level")

M1Or3G-03: [Invited] DC Superconducting Buses for Electric Aviation (in session "M1Or3G: Transportation Symposia I: System Level")

M1Or3G-04: [Invited] Liquid hydrogen storage and transfer-control system for integrated zero emission aviation (IZEA) (in session "M1Or3G: Transportation Symposia I: System Level")

M1Or3G-05: [Invited] Applications for additive materials in superconducting motors (in session "M1Or3G: Transportation Symposia I: System Level")

M1Or3G-06: [Invited] New concept for cryogenic gaseous hydrogen-cooled lightweight electric engine (in session "M1Or3G: Transportation Symposia I: System Level")

M1Or3G-07: [Invited] Fully Superconducting, Hydrogen-Cooled Motors for Electric Aircraft Propulsion (in session "M1Or3G: Transportation Symposia I: System Level")

M1Or3H: Panel Discussion (in session "M1Or3H: Special Session: Topological Materials for Electronics III: Panel Discussion")

M1Po2A-01: Influence of surface structure of metal materials on radiation properties at cryogenic temperature (in session "M1Po2A: Insulation/Conduction, Resin, and Impregnation II")

M1Po2A-04: Experimental and numerical study on thermoelastic properties of epoxy composites filled with zirconium tungstate powder at low temperatures (in session "M1Po2A: Insulation/Conduction, Resin, and Impregnation II")

M1Po2B-03: Smooth wafer-scale superconducting MgB2 films with high kinetic inductance for high frequency superconducting devices (in session "M1Po2B: HTS Bulk, Fe-based, and Thin Films")

M1Po2B-04: Oxidized structure and Compositional properties of 1144 phase FBS by analytical electron microscopy (in session "M1Po2B: HTS Bulk, Fe-based, and Thin Films")

M1Po2B-05: A bi-layer barrier design for iron-based superconducting wires (in session "M1Po2B: HTS Bulk, Fe-based, and Thin Films")

M1Po2B-07: Electronic structure and Auger electron spectroscopy (AES) measurements on cuprate oxide thin film heterostructures (in session "M1Po2B: HTS Bulk, Fe-based, and Thin Films")

M1Po2C-01: Magnetic, mechanical and thermal modeling of a conduction cooled superconducting whole body actively shielded 2T MgB2 open gradient magnet for proton therapy applications. (in session "M1Po2C: Metallic, Ceramic, Composite and Polymeric Materials II")

M1Po2C-03: Fabrication and Performance Characterization of Electrospun Nanofibers for Terrestrial and Space Applications (in session "M1Po2C: Metallic, Ceramic, Composite and Polymeric Materials II")

M1Po2C-04: Ceramic-Polymer Composite Coatings for Robust Anti-Frosting Surfaces (in session "M1Po2C: Metallic, Ceramic, Composite and Polymeric Materials II")

M1Po2C-05: Serration Deformation Behavior of Stainless Steel and Medium Entropy Alloy at Ultra-Cryogenic Temperature (in session "M1Po2C: Metallic, Ceramic, Composite and Polymeric Materials II")

M1Po2D-02: Mechanical properties measuring of low-dimensional samples at cryogenic (in session "M1Po2D: Cryogenic Materials Testing and Methods I")

M1Po2D-03: Development of an apparatus and process for precision cryogenic thermal contraction measurements (in session "M1Po2D: Cryogenic Materials Testing and Methods I")

M1Po2D-04: Coefficient of Friction of Polymers in Liquid Nitrogen (in session "M1Po2D: Cryogenic Materials Testing and Methods I")

M1Po2D-07: Using cryogenic milling for the recycling of multilayer packaging materials (in session "M1Po2D: Cryogenic Materials Testing and Methods I")

M2Or1A-01: [Invited] High - strength austenitic stainless steels for fusion and accelerator magnet systems (in session "M2Or1A: Special Session: High Strength Materials")

M2Or1A-02: Withdrawn (in session "M2Or1A: Special Session: High Strength Materials")

M2Or1A-03: [Invited] A comparison of high 4 K strength structural alloys, with consideration for the fatigue and fracture toughness properties (in session "M2Or1A: Special Session: High Strength Materials")

M2Or1A-04: [Invited] Development of large-scale TF structural XM-19 forgings for SPARC (in session "M2Or1A: Special Session: High Strength Materials")

M2Or1B-01: [Invited] Combination of thermodynamic and pinning optimization routes for enhancing Jc (in session "M2Or1B: Latest Development in Flux Pinning & Critical Current - REBCO I")

M2Or1B-02: [Invited] Methods to enhance and tune vortex pinning in coated conductors (in session "M2Or1B: Latest Development in Flux Pinning & Critical Current - REBCO I")

M2Or1B-03: [Invited] Ca-repaired BaZrO3 nanorods/YBa2Cu3O7-x interface for enhanced pinning in YBa2Cu3O7-x nanocomposites with 2-8% BaZrO3 doping (in session "M2Or1B: Latest Development in Flux Pinning & Critical Current - REBCO I")

M2Or1B-04: [Invited] Understanding In-Field Performance of REBCO Conductor with Artificial Pinning Centers by Scanning Raman Spectroscopy and 2D-XRD (in session "M2Or1B: Latest Development in Flux Pinning & Critical Current - REBCO I")

M2Or1C-01: [Invited] Large Magneto-Electric Resistance in the Topological Dirac Semimetal Alpha-Sn (in session "M2Or1C: Special Session: Topological Materials for Electronics IV")

M2Or1C-02: [Invited] Magnetotransport Studies of Alpha-Sn and Topological Heterostructures (in session "M2Or1C: Special Session: Topological Materials for Electronics IV")

M2Or1D-01: [Invited] U.S. Department of Energy activities in liquid hydrogen infrastructure and storage (in session "M2Or1D: Special Session: Cryogenic Clean Energy and Mobility I: Government Perspectives")

M2Or1D-02: [Invited] ARPA-E's topics in the areas of cryogenics energy sources and their applications (in session "M2Or1D: Special Session: Cryogenic Clean Energy and Mobility I: Government Perspectives")

M2Or1D-03: [Invited] Considerations for commercial adoption of cryogenic hydrogen for propulsion applications (in session "M2Or1D: Special Session: Cryogenic Clean Energy and Mobility I: Government Perspectives")

M2Or2E-01: [Invited] Progress Report on Mechanical Stress in High-Field REBCO Magnet (in session "M2Or2E: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part I")

M2Or2E-02: [Invited] Mechanical property evaluation of 2G HTS tapes at Fujikura (in session "M2Or2E: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part I")

M2Or2E-03: [Invited] Electromagnetic and Mechanical Simulation of REBCO Pancake Coils Considering Screening Currents (in session "M2Or2E: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part I")

M2Or2E-04: [Invited] Property Variations in Modern REBCO Coated Conductors from Multiple Manufacturers (in session "M2Or2E: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part I")

M2Or2F-01: [Invited] Planar Josephson Junctions: From Topological Superconductivity to a Novel Switching Mechanism (in session "M2Or2F: Special Session: Topological Materials for Electronics V")

M2Or2F-02: [Invited] Josephson diode effect in Dirac semimetal Cd3As2 (in session "M2Or2F: Special Session: Topological Materials for Electronics V")

M2Or2F-03: [Invited] Magnetoelectric Coupling via Magnetic-Field-Induced Switching in Spin Crossover Complexes (in session "M2Or2F: Special Session: Topological Materials for Electronics V")

M2Or2G-01: [Invited] Cryogenic solutions to address net zero emissions targets (in session "M2Or2G: Special Session: Cryogenic Clean Energy and Mobility II")

M2Or2G-02: [Invited] New Zealand Government Initiatives in Clean Energy Innovation (in session "M2Or2G: Special Session: Cryogenic Clean Energy and Mobility II")

M2Or2G-03: [Invited] Hyper Tech Perspectives on Cryo-fuels and the Impacts for Superconducting Wind Turbines and Electric Aircraft (in session "M2Or2G: Special Session: Cryogenic Clean Energy and Mobility II")

M2Or2G-04: [Invited] Can process intensification of liquefaction technology for LNG and LH2 accelerate adoption for transportation use? (in session "M2Or2G: Special Session: Cryogenic Clean Energy and Mobility II")

M2Or3H-01: [Invited] Compressive and tensile bending strains in REBCO tapes (in session "M2Or3H: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part II")

M2Or3H-02: Withdrawn (in session "M2Or3H: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part II")

M2Or3H-03: [Invited] A report on the international round-robin test for electromechanical properties of HTS composite tapes by uniaxial tensile testing at liquid nitrogen temperature (in session "M2Or3H: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part II")

M2Or3H-04: [Invited] Review on the investigations of uniaxial stress susceptibility of pre-over pressure reacted Bi-2212 round wires for fusion high-field magnet application (in session "M2Or3H: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part II")

M2Or3H-05: [Invited] Compressive bending property of BSCCO tapes (in session "M2Or3H: Special Session: Electromechanical Behaviors of HTS Conductors for Applications - Part II")

M2Or3I-01: [Invited] Status and challenges of accelerator sector conductor development (in session "M2Or3I: Special Session: High Field Superconducting Materials for Accelerator Magnets I")

M2Or3I-02: [Invited] Sustainability and supply chain of superconductors (in session "M2Or3I: Special Session: High Field Superconducting Materials for Accelerator Magnets I")

M2Or3I-03: [Invited] Nb3Sn conductors with artificial pinning centers for high field accelerator magnets (in session "M2Or3I: Special Session: High Field Superconducting Materials for Accelerator Magnets I")

M2Or3I-04: [Invited] Bi-2212 conductors and cables for accelerator magnets (in session "M2Or3I: Special Session: High Field Superconducting Materials for Accelerator Magnets I")

M2Or3J-01: [Invited] Rotating Machines for the Cryo-Electric Planes – Status and Development Issues (in session "M2Or3J: Transportation Symposia II: Rotating Machines")

M2Or3J-02: [Invited] Cryogenic vacuum chamber testing of a conductively-cooled, high temperature superconducting rotor for a 1.4 MW electric machine for aeronautics applications (in session "M2Or3J: Transportation Symposia II: Rotating Machines")

M2Or3J-03: [Invited] Tuned windings - the window of opportunity for the implementation of solid conductors in high frequency cryogenic electric machines (in session "M2Or3J: Transportation Symposia II: Rotating Machines")

M2Or3J-04: [Invited] A Double Rotor Flux Switching Machine with High-Temperature-Superconductor Field Coils for Transportation Applications (in session "M2Or3J: Transportation Symposia II: Rotating Machines")

M2Or3J-05: [Invited] AC Loss in no-insulation ReBCO racetrack coils for high-dynamic applications (in session "M2Or3J: Transportation Symposia II: Rotating Machines")

M2Or3K-01: [Invited] Emergent Pseudogravity in Magnetic Weyl Semimetals (in session "M2Or3K: Special Session: Topological Materials for Electronics VI")

M2Or3K-02: [Invited] Berry Phase Enforced Spinor Pairing (in session "M2Or3K: Special Session: Topological Materials for Electronics VI")

M2Or3K-03: [Invited] Diodic quantum materials (in session "M2Or3K: Special Session: Topological Materials for Electronics VI")

M2PL1-01: From high-temperature superconductivity to room-temperature superconductivity: From ambient pressure to very high pressure (in session "ICMC Plenary: Paul C. W. Chu, Texas Center for Superconductivity at the University of Houston (TcSUH) -- sponsored by TcSUH")

M2Po2A-01: Magneto-structural phase transitions and two-dimensional spin waves in graphite (in session "M2Po2A: Quantum Phenomena and Power Electronics")

M2Po2A-02: Design of a 40-MW-Class Electric Wire Interconnect System for Liquid-H2 Fuel-cell Aircraft Propulsion (in session "M2Po2A: Quantum Phenomena and Power Electronics")

M2Po2A-03: Impact of high-power semiconductor performance in cryogenic temperatures (in session "M2Po2A: Quantum Phenomena and Power Electronics")

M2Po2B-02: Numerical study of the clamping system and mechanical stress amplitudes in powerline busbars of SIS100 synchrotron fast ramped superconducting magnets (in session "M2Po2B: Modelling and AC Losses")

M2Po2B-03: Magnetization, Flux Creep, and AC Loss in a Bi-2212 Conductor for Particle Accelerator Applications (in session "M2Po2B: Modelling and AC Losses")

M2Po2B-04: Simulations for the fault current limiting operation of a long-length YBCO CORC® superconducting cable cooled by Helium gas (in session "M2Po2B: Modelling and AC Losses")

M2Po2B-05: CLIQ Quench Protection System for a MgB2 Segment Coil for MRI Applications (in session "M2Po2B: Modelling and AC Losses")

M2Po2B-06: A 3D/2D mixed-dimensional structural model and electro-mechanical phenomenological model for REBCO coated conductors (in session "M2Po2B: Modelling and AC Losses")

M2Po2B-07: A hierarchical delamination model for epoxy-impregnated REBCO superconducting pancake winding (in session "M2Po2B: Modelling and AC Losses")

M2Po2C-01: Development of a new S-shaped Superconducting Hexapole for compact ECRIS (in session "M2Po2C: Fusion and High Field Magnets")

M2Po2C-02: Development and testing of a few-period, subsize coil for MgB2 Planar Undulator (in session "M2Po2C: Fusion and High Field Magnets")

M2Po2C-03: High Energy Density Solenoid SMES Designs for Air and Space Applications (in session "M2Po2C: Fusion and High Field Magnets")

M2Po2C-04: The design and analysis of a superconducting magnet system for high field MRI (in session "M2Po2C: Fusion and High Field Magnets")

M2Po2C-05: Characterization of delamination behaviors in REBCO coated conductor tapes under transverse loading (in session "M2Po2C: Fusion and High Field Magnets")

M2Po2D-01: Characteristics of Laminates with Magnetic Properties for Motor Slot Wedges and Other Applications at Cryogenic Temperatures (in session "M2Po2D: Metallic, Ceramic, Composite and Polymeric Materials III")

M2Po2D-02: Mechanical Properties and Damage Development in Glass Fiber/Epoxy Laminates Subjected to Tensile Loading at Sub-zero Temperatures (in session "M2Po2D: Metallic, Ceramic, Composite and Polymeric Materials III")

M2Po2D-04: Effect of annealing heat treatment on the low-temperature mechanical properties of high entropy alloy CoFeCrNiAl0.05Ti0.05 (in session "M2Po2D: Metallic, Ceramic, Composite and Polymeric Materials III")

M2Po2D-05: The Low-temperature Thermal Properties of Epoxy Resin Composites Enhanced by Graphene and Modified Alumina Hybrid Fillers (in session "M2Po2D: Metallic, Ceramic, Composite and Polymeric Materials III")

M2Po2E-04: The effect of Ca doped buffer layers on BaHfO3 doped YBa2Cu3O7-x composite multilayer superconducting films (in session "M2Po2E: REBCO Conductors and Flux Pinning")

M2Po2E-05: Increased current density and pinning force in Ca - doped YBa2Cu3O7-δ / BaZrO3 multilayer thin films over a wide temperature range of 77K – 5K with an applied field of 0 – 9 Tesla (in session "M2Po2E: REBCO Conductors and Flux Pinning")

M2Po2E-06: Heredity and physical properties in HTSC-thick films after processing HTSC-powders by method of the electromagnetic separation (in session "M2Po2E: REBCO Conductors and Flux Pinning")

M3Or1A-01: Cryogenic Hydrogen and testing methods: microstructural and mechanical properties under cryogenic hydrogen environment (in session "M3Or1A: Cryogenic Materials Testing and Methods II")

M3Or1A-02: Investigating the applicability of existing mechanical test standards for fibre-reinforced polymer matrix composites at cryogenic temperatures (in session "M3Or1A: Cryogenic Materials Testing and Methods II")

M3Or1A-03: Development of measurement tools and protocols for shear strength measurements of cryogenic epoxy interfaces (in session "M3Or1A: Cryogenic Materials Testing and Methods II")

M3Or1A-04: Design and Analysis of Wavelength-selective Nanofibers as Compact and Lightweight Thermal Coatings for Cryogen Applications in Deep Space Missions (in session "M3Or1A: Cryogenic Materials Testing and Methods II")

M3Or1A-05: Cryogenic material testing with gaseous hydrogen for hydrogen-electric aircraft propulsion (in session "M3Or1A: Cryogenic Materials Testing and Methods II")

M3Or1A-06: Dimensional stability of cryotreated diaphragms of pressure transducers (in session "M3Or1A: Cryogenic Materials Testing and Methods II")

M3Or1B-01: [Invited] Study on Irradiation Effect of Insulating Materials for Fusion Superconducting Magnets: Temperature Dependence of Mechanical Strength (in session "M3Or1B: Thermal, Electrical and Magnetic Properties, Radiation, and Degradation")

M3Or1B-02: Development and performance qualification of two kinds of REBCO CICC for fusion (in session "M3Or1B: Thermal, Electrical and Magnetic Properties, Radiation, and Degradation")

M3Or1B-03: Radiation-Resistant Electrical Insulation for Superconducting Magnets (in session "M3Or1B: Thermal, Electrical and Magnetic Properties, Radiation, and Degradation")

M3Or1B-04: FEM analysis of transient current sharing in REBCO coated conductor cables (in session "M3Or1B: Thermal, Electrical and Magnetic Properties, Radiation, and Degradation")

M3Or1C-01: [Invited] Hydrogen generation, storage and utilisation in Australia: transition to a low emissions energy sector (in session "M3Or1C: Special Session: Cryogenic Clean Energy and Mobility III")

M3Or1C-02: [Invited] NASA Assessment of Liquid Hydrogen Aircraft Opportunities and Technologies (in session "M3Or1C: Special Session: Cryogenic Clean Energy and Mobility III")

M3Or1C-03: [Invited] Benefits of Alternate Cryogenic Fuels for Logistics and Thermal Management of Aerospace Transportation (in session "M3Or1C: Special Session: Cryogenic Clean Energy and Mobility III")

M3Or1C-04: [Invited] Dual Hydrogen-Jet Fuel Aircraft –A path to low carbon emissions (in session "M3Or1C: Special Session: Cryogenic Clean Energy and Mobility III")

M3Or2D-01: Techno-economic Analysis of the Cryogenic Flux Capacitor Compared to Other forms of Hydrogen Production and Storage (in session "M3Or2D: Hydrogen Technologies and Compatible Materials")

M3Or2D-02: Preliminary Experimental Studies into the Storage Capacity of Cryogenic Hydrogen in Aerogel Blanket Materials (in session "M3Or2D: Hydrogen Technologies and Compatible Materials")

M3Or2D-03: Macro and microscopic properties of 304 steel long-term exposed to liquid hydrogen (in session "M3Or2D: Hydrogen Technologies and Compatible Materials")

M3Or2D-04: In situ observation of microcrack formation in carbon fibre reinforced composites under mechanical load at cryogenic temperatures. (in session "M3Or2D: Hydrogen Technologies and Compatible Materials")

M3Or2F-01: [Invited] Cryogenic thermo-physical properties of additive manufactured materials (in session "M3Or2F: Additive Manufacturing")

M3Or2F-02: [Invited] Additive Manufacturing of Cryogenic Materials (in session "M3Or2F: Additive Manufacturing")

M3Or2F-03: Ultimate Tensile Strengths and Elastic Moduli of Additively Manufactured PA840-GSL, A6061-RAM2, and AlSi10Mg at 20K (in session "M3Or2F: Additive Manufacturing")

M3Or2F-04: Mechanical tensile testing of 3D-Printed Titanium 6Al-4V at Cryogenic Temperature (in session "M3Or2F: Additive Manufacturing")

M3Or2G-01: [Invited] Airplane motors employing superconducting DC field windings and conventional conductor AC windings (in session "M3Or2G: Transportation Symposia III: Motors and Power Electronics")

M3Or2G-02: [Invited] Ultrafast, Ultracompact Superconducting Series-Type Hybrid Circuit Breaker (SS-HCB) (in session "M3Or2G: Transportation Symposia III: Motors and Power Electronics")

M3Or2G-03: [Invited] Superconducting electric machines for electric propulsion –CHEETA motor, HEMM motor, and CRUISE motor, a comparison. (in session "M3Or2G: Transportation Symposia III: Motors and Power Electronics")

M3Or2G-04: [Invited] - moved to Session M3Or4N (in session "M3Or2G: Transportation Symposia III: Motors and Power Electronics")

M3Or3H-01: Introduction (in session "M3Or3H: Special Session: Low Temperature Materials Database A Superconductors")

M3Or3H-02: [Invited] The critical current and critical current density of MgB2 ultrafine superconducting wires and cables (in session "M3Or3H: Special Session: Low Temperature Materials Database A Superconductors")

M3Or3H-03: [Invited] Development of MgB2 superconductor wires, cables, coils and their applications (in session "M3Or3H: Special Session: Low Temperature Materials Database A Superconductors")

M3Or3H-04: [Invited] Electro-magnetic tape width of REBCO coated conductors characterized by reel-to-reel scanning Hall-probe magnetic microscopy (in session "M3Or3H: Special Session: Low Temperature Materials Database A Superconductors")

M3Or3H-05: [Invited] Resistivity Measurements of Electric Conductors for High Power Machines and Magnets for a Full Range of Cryogenic Temperatures and Magnetic Fields (in session "M3Or3H: Special Session: Low Temperature Materials Database A Superconductors")

M3Or3H-06: [Invited] Database of VSM In-Field Performance of REBCO Coated Conductor at 4.2-77 K, 0-14 T (in session "M3Or3H: Special Session: Low Temperature Materials Database A Superconductors")

M3Or3H-07: [Invited] Fabrication and transport properties of multifilament Cu/Ag/Ba-122 iron-based superconducting wires (in session "M3Or3H: Special Session: Low Temperature Materials Database A Superconductors")

M3Or3H-08: Discussion (in session "M3Or3H: Special Session: Low Temperature Materials Database A Superconductors")

M3Or3I-01: [Invited] Applications of superconducting circuits using hybrid graphene Josephson junctions (in session "M3Or3I: Superconducting Quantum Systems & Materials")

M3Or3I-02: [Invited] Functional Amortization of Cryocooling (in session "M3Or3I: Superconducting Quantum Systems & Materials")

M3Or3I-03: [Invited] Recent material developments for superconducting quantum circuits (in session "M3Or3I: Superconducting Quantum Systems & Materials")

M3Or3I-04: [Invited] Cryogenics for Superconducting Quantum Technologies (in session "M3Or3I: Superconducting Quantum Systems & Materials")

M3Or3J-01: [Invited] Dual Flux Pinning Mechanisms and the Effect of Microstructure on Pinning and Critical Current in APC Nb3Sn (in session "M3Or3J: Latest Development in Flux Pinning & Critical Current - non-REBCO")

M3Or3J-02: [Invited] APC Nb3Sn conductors: opportunities and challenges (in session "M3Or3J: Latest Development in Flux Pinning & Critical Current - non-REBCO")

M3Or3J-03: [Invited] Critical current hysteresis and flux pinning in 7 core Cu/Ag/(Ba, K)Fe2As2 tapes (in session "M3Or3J: Latest Development in Flux Pinning & Critical Current - non-REBCO")

M3Or3J-04: [Invited] Overview of the effect of ion irradiation in cuprate and iron-based superconductors (in session "M3Or3J: Latest Development in Flux Pinning & Critical Current - non-REBCO")

M3Or3J-05: [Invited] Flux pinning performance of FeSe0.5Te0.5 thin films modified by low-energy ion irradiation (in session "M3Or3J: Latest Development in Flux Pinning & Critical Current - non-REBCO")

M3Or3J-06: [Invited] Effect of metamaterial engineering on the superconductive properties of ultrathin layers of NbTiN (in session "M3Or3J: Latest Development in Flux Pinning & Critical Current - non-REBCO")

M3Or3K-01: [Invited] Withdrawn (in session "M3Or3K: Special Session: Cryogenic Clean Energy and Mobility IV")

M3Or3K-02: [Invited] Thermodynamic Modeling of Gaseous Hydrogen Filling from Fueling Station to Fuel Cell Electric Vehicle -Lessons of Gaseous Hydrogen Fueling and Possibility and Expectation of Liquid Hydrogen Use- (in session "M3Or3K: Special Session: Cryogenic Clean Energy and Mobility IV")

M3Or3K-03: [Invited] US Navy Developments in Large-Scale Superconducting Applications (in session "M3Or3K: Special Session: Cryogenic Clean Energy and Mobility IV")

M3Or3L: Panel Discussion (in session "M3Or3L: Special Session: Cryogenic Clean Energy and Mobility V: Panel Discussion")

M3Or4M-01: Introduction (in session "M3Or4M: Special Session: Low Temperature Materials Database B Functional & Structural Materials")

M3Or4M-02: [Invited] Strength of Pure Al at Cryogenic Temperatures (in session "M3Or4M: Special Session: Low Temperature Materials Database B Functional & Structural Materials")

M3Or4M-03: [Invited] Resistivity ratios for high purity aluminum in magnetic fields (in session "M3Or4M: Special Session: Low Temperature Materials Database B Functional & Structural Materials")

M3Or4M-04: [Invited] Tensile properties and deformation behavior at low temperatures in ferrite and austenite duplex stainless steel with various grain sizes (in session "M3Or4M: Special Session: Low Temperature Materials Database B Functional & Structural Materials")

M3Or4M-05: [Invited] Strength and Fracture Toughness of Type 304 and 316 Austenitic Stainless Steels at 4.2 K (in session "M3Or4M: Special Session: Low Temperature Materials Database B Functional & Structural Materials")

M3Or4M-06: [Invited] Three-point bending experiment of epoxy resin and glass fiber reinforced composites by Fiber Bragg Gratings (in session "M3Or4M: Special Session: Low Temperature Materials Database B Functional & Structural Materials")

M3Or4M-07: Discussion (in session "M3Or4M: Special Session: Low Temperature Materials Database B Functional & Structural Materials")

M3Or4N-01: [Invited] HTS Devices and Related Cryogenic Systems for Electric Aircraft and Ships (in session "M3Or4N: Transportation Symposia IV: Cable, Power Distribution")

M3Or4N-02: [Invited] Cryoresistive and superconductive aerospace main power transmission cables (in session "M3Or4N: Transportation Symposia IV: Cable, Power Distribution")

M3Or4N-03: [Invited] GaN HEMT and Air Core Magnetics based Power Converters Evaluations at Cryogenic Temperature (in session "M3Or4N: Transportation Symposia IV: Cable, Power Distribution")

M3Or4N-04: [Invited] LTspice modeling for GaN-GIT HEMT including cryogenic temperature (in session "M3Or4N: Transportation Symposia IV: Cable, Power Distribution")

M3Or4N-05: [Invited] Development and Impacts of a Superconducting Power Cable in a 110kV Distribution Network (in session "M3Or4N: Transportation Symposia IV: Cable, Power Distribution")

M3Or4O-01: [Invited] High critical current REBCO tapes by Advanced MOCVD (in session "M3Or4O: Latest Development in Flux Pinning & Critical Current - REBCO II")

M3Or4O-02: [Invited] Numerical evaluation on angular dependence of Jc in REBCO coated conductors due to spherical pins and columnar pins (in session "M3Or4O: Latest Development in Flux Pinning & Critical Current - REBCO II")

M3Or4O-03: [Invited] Non-linear electrical transport on superconducting thin films in pulsed magnetic fields (in session "M3Or4O: Latest Development in Flux Pinning & Critical Current - REBCO II")

M3Or4O-04: [Invited] Historical Progress of Artificial Pinning Center Additions in (Y,RE)BaCuO Coated Conductors (in session "M3Or4O: Latest Development in Flux Pinning & Critical Current - REBCO II")

M3Or4P-01: [Invited] AC Loss simulation and system-wide analysis on a Single-Phase 6.5 MVA HTS Traction Transformer for Chinese High-Speed Trains (in session "M3Or4P: Experiment and Modelling of Magnetization and AC Losses in Superconductors")

M3Or4P-02: AC Loss of Metallic and Superconductor Electric Wires at high B*dB/dt Measured by Calorimetric Method for High Power Density Rotating Machines (in session "M3Or4P: Experiment and Modelling of Magnetization and AC Losses in Superconductors")

M3Or4P-03: Accuracy comparison of screening current modelings of REBCO pancake coils (in session "M3Or4P: Experiment and Modelling of Magnetization and AC Losses in Superconductors")

M3Or4P-04: Understanding and Minimizing AC losses in CORC cables of YBCO superconducting tapes (in session "M3Or4P: Experiment and Modelling of Magnetization and AC Losses in Superconductors")

M3Or4P-05: Magnetization ac losses, magnetization measurement, and creep analysis of Ni-plated Roebel Cable for particle accelerator applications (in session "M3Or4P: Experiment and Modelling of Magnetization and AC Losses in Superconductors")

M3Or4P-06: FEM analysis of Magnetization AC loss in REBCO coated conductor tape and helical wound tape conductors (in session "M3Or4P: Experiment and Modelling of Magnetization and AC Losses in Superconductors")

M3Or4P-07: AC Losses and Surprising Magnet Heating in Reciprocating Active Magnetic Regenerative Refrigerators (in session "M3Or4P: Experiment and Modelling of Magnetization and AC Losses in Superconductors")

M4Or1A-01: [Invited] Magnetization and current sharing in REBCO cables and their impact on field error in Accelerator magnets (in session "M4Or1A: Special Session: High Field Superconducting Materials for Accelerator Magnets II")

M4Or1A-02: [Invited] Spiral Copper-plated Striated Coated-conductor Cable at Kyoto University (in session "M4Or1A: Special Session: High Field Superconducting Materials for Accelerator Magnets II")

M4Or1A-03: [Invited] IBS conductors developed for high field accelerator magnets (in session "M4Or1A: Special Session: High Field Superconducting Materials for Accelerator Magnets II")

M4Or1A-04: [Invited] IBS cables, model coils and application prospects on future high-energy accelerators (in session "M4Or1A: Special Session: High Field Superconducting Materials for Accelerator Magnets II")

M4Or1B-01: [Invited] Technologies and Topologies for Cryogenic-Based Electric Aircraft (in session "M4Or1B: Transportation Symposia V: Electronics")

M4Or1B-02: [Invited] Cryogenic Power Conversion and Its Potential in Future All Electric Transportation Systems: From Silicon Age to WBG Era (in session "M4Or1B: Transportation Symposia V: Electronics")

M4Or1B-03: [Invited] Cryogenics power electronics for electrified aircraft propulsion (in session "M4Or1B: Transportation Symposia V: Electronics")

M4Or1B-04: [Invited] Effects of arc faults in HTS cables on the cryostat (in session "M4Or1B: Transportation Symposia V: Electronics")

M4Or1B-05: [Invited] A Cryogenically-Cooled Power Device Packaging in High Altitude Applications: Heterogenous Integration Challenges and Requirements (in session "M4Or1B: Transportation Symposia V: Electronics")

M4Or1B-06: [Invited] Lightweight clad bimetal conductors for cryogenic applications (in session "M4Or1B: Transportation Symposia V: Electronics")

M4PL1: Electric Aircraft: Solving the Key Materials and Engineering Challenges to Manufacture a Complete Electrical Propulsion System (in session "ICMC Plenary: Rod Badcock, Robinson Research Institute")

Opening (in session "Opening & CEC Plenary: Amanda Simpson, Airbus Americas, Inc")

CEC/ICMC 2023 Abstracts & Technical Program

Conference Management: Centennial Conferences

Material Package

Choose timezone

CEC/ICMC 2023 Abstracts & Technical Program

Conference Management: Centennial Conferences