Conveners
C4Or1B: Large Scale Refrigeration / Liquefaction V
- Sastry Pamidi (The Florida State University)
- Philipp Arnold (European Spallation Source)
The ITER’s Cryoplant occupies nearly 8000 m2 area composed of various cryogenic systems aimed at the production, liquefaction, and storage of cryogenic products. Transferring of cryo products occurs by cold and warm lines with a total length of 1.5 km within the Cryoplant area and 3.5 km in the Tokamak building to gradually cool down in total 10000 tons of ITER superconducting magnets, thermal...
Liquid nitrogen is often used as a substitute for oxygen testing due to safety concerns, and the general similarity between their fluid properties. During the Cryogenic Fluid In-situ Liquefaction for Landers (CryoFILL) testing, an opportunity arose to compare liquid nitrogen and liquid oxygen behavior using the same test hardware in similar test conditions. Comparative testing would verify...
The High Luminosity LHC (HL-LHC) project is aiming to upgrade the Large Hadron Collider (LHC) at CERN by increasing its peak luminosity by a factor of five with respect to its nominal value. This upgrade will include the replacement of the final focusing superconducting magnets and additional superconducting radiofrequency crab cavities in the long straight sections of the interaction points 1...
The experimental system for the Facility for Rare Isotope Beams (FRIB) at Michigan State University (MSU) has several segments. Following the acceleration through the three superconducting Linac segments, the heavy ion beam is guided through the target, a fragment pre-separator and (the A1900) separator segments. It can then be split and sent to various experimental vaults and instrumentation,...
