CERN
Author in the following contributions
- Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement
- Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC
- Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN
- Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole.
- Friction-coefficient between the Ti6Al4V loading pole and the 316LN steel shims of the HL-LHC 11 T magnets
- Thermomechanical behavior of the HL-LHC 11 tesla Nb3Sn magnet coil constituents during reaction heat treatment
- Windability tests of Nb3Sn Rutherford cables for HL-LHC and FCC
- Status of the 16 T dipole development programme for a future hadron collider
