Speaker
Description
Summary
The GBT–SCA is one the components of the GBT system chipset. It is proposed for the future SLHC experiments and is designed to be configurable matching different frontend system requirements. The GBT-SCA is intended for the slow control and monitoring of the embedded frontend electronics and implements a point-to-multi point connection between one GBT optical link ASIC and several frontend ASICs. The GBT-SCA connects to a dedicated electrical port on the GBT ASIC that provides 80 Mbps of bidirectional data traffic. If needed, more than one GBT-SCA ASIC can be connected to a GBT ASIC thus increasing the control and monitoring capabilities in the system. The GBT-SCA ASIC features several I/O ports to interface with the embedded front-end ASICs. There are 16 I2C buses, 1 JTAG controller port, 4 8-bit wide parallel-ports, a memory bus controller and an ADC to monitor up to 8 external analog signals. All these ports are accessible from the counting room electronics, via the GBT optical link system. Special design techniques are being employed to protect the operation of the GBT-SCA against radiation induced Single-Event-Upsets to a level that is compatible for the SLHC experiments.
The paper will present the overall architecture of the GBT-SCA ASIC describing in detail the design of the peripheral controllers for the individual I/O ports, the network controller that implements the connectivity with the GBT ASIC and will discuss the operation modes and the flow of information between the control electronics and the embedded front end ASICs.
