Name: CEC-ICMC 2017 - Abstracts, Timetable and Presentations
Start: 2017-07-09T08:00:00-05:00
End: 2017-07-13T11:30:00-05:00
Location: Monona Terrace Community and Convention Center

3D CFD Transient numerical simulation of superfluid Helium (in session "C2OrF - Helium and Oxygen Fluid Mechanics and Heat Transfer")

4K Helium Refrigerators for Commercial Superconducting Accelerators (in session "C3OrF - Large Scale Systems, Facilities and Testing II")

[Invited] A portable superconducting cryo-magnet with magnetic field of > 3 T generated by the pulsed field magnetization (in session "M1OrB - HTS and MgB2 Bulk I")

[Invited] Advances in Superconducting Device Fabrication from Nanowire Detectors to Large-Scale Integrated Circuits (in session "M3OrF - Focused Session: Cryogenic Microelectronics & Materials II")

[Invited] An AC Homopolar HTS Generator for Flywheel Energy Storage (in session "M1OrC - Focused Symposia - Propulsion II: Power Electronics")

[Invited] Application of SMES for Hybrid-electric Power Systems (in session "M1OrE - Focused Symposia - Propulsion IV: Power Electronics, Energy")

[Invited] Correlated and random pinning behaviors in Sm123 tapes with nanorods (in session "M3OrE - Focused Session: Latest Development in Flux Pinning IV: Pinning in HTS")

[Invited] Cryogenic Power Electronics for Superconducting Power Systems (in session "M1OrC - Focused Symposia - Propulsion II: Power Electronics")

[Invited] Cryogenic Sensor and Cryorefrigerator Development in the Quantum Sensors Group at NIST (in session "M4OrA - Focused Session: Cryogenic Microelectronics & Materials III")

[Invited] Cryogenically Cooled 1-MW Inverter (in session "M1OrE - Focused Symposia - Propulsion IV: Power Electronics, Energy")

[Invited] Description of temperature-, magnetic-field, and position-dependent current-voltage characteristics in high Tc superconducting long length coated conductors (in session "M2OrB - YBCO Coated Conductors II: Processing & Properties")

[Invited] Development of 22kV HTS Triaxial superconducting bus (in session "M2OrE - Focused Symposia - Propulsion VII: Wires & Cables")

[Invited] Development of Bi-2212 round wire for high field magnet applications (in session "M3OrH - BSCCO Wires and Tapes II: Processing & Properties")

[Invited] Development of Cryogenic/Superconducting Components for Aircraft Electric Propulsion (in session "M1OrA - Focused Symposia - Propulsion I: Overview, System Level")

[Invited] Development of Current Biased Superconducting Stripline Detectors and Signal Processing Circuits Compatible with Standard SFQ Foundry Processes (in session "M3OrF - Focused Session: Cryogenic Microelectronics & Materials II")

[Invited] Development of High Energy Density Superconducting-Magnetic-Energy-Storage (SMES) for Aerospace Electric Propulsion (in session "M1OrE - Focused Symposia - Propulsion IV: Power Electronics, Energy")

[Invited] Development of Silver-Sheathed Bi2223 Superconducting Wires (in session "M3OrH - BSCCO Wires and Tapes II: Processing & Properties")

[Invited] Development of Superconducting PM Machines (in session "M2OrC - Focused Symposia - Propulsion VI: Motors & Generators, Cryocool Technologies")

[Invited] Development toward all Superconducting Motors in Japan (in session "M2OrA - Focused Symposia - Propulsion V: Motors & Generators")

[Invited] Different nature of flux pinning in Fe-based superconductors (in session "M3OrA - Focused Session: Latest Development in Flux Pinning II: LTS, Fe-based, Creep in HTS")

[Invited] Direct writing of High-TC Josephson Junctions with Focused Helium Ion BEams (in session "M3OrD - Focused Session: Cryogenic Microelectronics & Materials I")

[Invited] Enhanced pinning in heavily-doped REBCO coated conductors (in session "M3OrE - Focused Session: Latest Development in Flux Pinning IV: Pinning in HTS")

[Invited] Enhancing Flux Pinning of Y-Ba-Cu-O Superconducting Thin Films at ≤ 30 K and H ≥ 3 T (in session "M3OrE - Focused Session: Latest Development in Flux Pinning IV: Pinning in HTS")

[Invited] Flux Pump Brushless Exciters for HTS Rotating Machines (in session "M2OrA - Focused Symposia - Propulsion V: Motors & Generators")

[Invited] Future Cryogenic Switchgear Technologies for Superconducting Power Systems (in session "M1OrC - Focused Symposia - Propulsion II: Power Electronics")

[Invited] Heat Switch Technology for Thermal Management in Cryogenic Devices (in session "C4OrA - Novel Devices II")

[Invited] High in-field Ic and Low AC-loss with Low Cost Coated Conductors for Electric Propulsion Transportation in Japan (in session "M2OrE - Focused Symposia - Propulsion VII: Wires & Cables")

[Invited] High Power Density Electric Motors for Electric Aircraft: Superconductor and Permanent Magnet Approaches (in session "M2OrA - Focused Symposia - Propulsion V: Motors & Generators")

[Invited] High Temperature Superconductors (HTS) in Electric Aircrafts – the baseline and the perspective (in session "M1OrA - Focused Symposia - Propulsion I: Overview, System Level")

[Invited] Improvement of Jc of Nb3Sn conductors by introducing additional pinning centers (in session "M3OrC - Focused Session: Latest Development in Flux Pinning III: Pinning, Critical Currents & Creep in HTS")

[Invited] Interactive approach towards controllable generation of strong and isotropic artificial pinning centers in RE-123 films (in session "M3OrC - Focused Session: Latest Development in Flux Pinning III: Pinning, Critical Currents & Creep in HTS")

[Invited] Intermediate Roebel cable lengths as a first HTS cable used in the HTS demonstrator accelerator type coil. (in session "M2OrD - HTS and LTS Cables II")

[Invited] Modeling and simulation of flux pinning of REBCO thin films with artificial pinning centers (in session "M3OrE - Focused Session: Latest Development in Flux Pinning IV: Pinning in HTS")

[Invited] Multi-pixel superconducting nanowire single-photon detectors with cryogenic signal processors using single-flux-quantum circuits (in session "M3OrF - Focused Session: Cryogenic Microelectronics & Materials II")

[Invited] Novel concept of 60-120 kW refrigerator - Part 2: 4-80K box (in session "C2OrD - Large Scale Refrigeration and Liquefaction III")

[Invited] Pinning Landscape Enhancement by Means of Irradiation (in session "M1OrF - Focused Session: Pushing Nb3Sn Conductors Beyond the State of the Art")

[Invited] Present Status of PIT Round Wires of 122-type Iron-based Superconductors (in session "M4OrB - Superconductors IV: Pnictide Materials")

[Invited] Progress in the development of high performance pnictide wires (in session "M4OrB - Superconductors IV: Pnictide Materials")

[Invited] Prospects for further improving Jc of Nb3Sn conductors (in session "M1OrF - Focused Session: Pushing Nb3Sn Conductors Beyond the State of the Art")

[Invited] Prototyping Extensible Quantum Computing Architectures (in session "M4OrA - Focused Session: Cryogenic Microelectronics & Materials III")

[Invited] Superconducting thin films and multilayers for particle accelerators (in session "M1OrD - Focused Session: Superconducting Thin Films for SRF and Magnets Applications")

[Invited] Targeted high-temperature superconductor wire characterization and selection for electric propulsion applications (in session "M2OrE - Focused Symposia - Propulsion VII: Wires & Cables")

[Invited] Terahertz emission from the intrinsic Josephson junctions of high-symmetry thermally-managed BSCCO microstrip antennas (in session "M3OrD - Focused Session: Cryogenic Microelectronics & Materials I")

[Invited] Transport properties of IMD-processed 100 m class 6-filament MgB2 wire and solenoid coil (in session "M2OrF - MgB2 Wires and Tapes: Processing & Properties")

[Invited] Ultra-Low-Power Silicon Germanium Cryogenic Low Noise Amplifiers (in session "M4OrA - Focused Session: Cryogenic Microelectronics & Materials III")

[Invited] Vortex pinning landscape in low cost chemical solution Nanocomposite YBa2Cu3O7-x coated conductors (in session "M3OrA - Focused Session: Latest Development in Flux Pinning II: LTS, Fe-based, Creep in HTS")

A 4 K Tactical Cryocooler Using Reverse-Brayton Machines (in session "M3OrF - Focused Session: Cryogenic Microelectronics & Materials II")

A comparative study on cavitation models for simulating the cavitating flow in liquid nitrogen spray nozzle (in session "C3OrG - Nitrogen Fluid Mechanics and Heat Transfer")

A Computational Approach of 1D and 2D/3D CFD Coupled Model (in session "C3OrA - Stirling Cryocooler Performance and Modeling")

A helium pulsating heat pipe for conduction-cooled superconducting magnets (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

A high field and cryogenic test facility for neutron irradiated superconducting wire (in session "M3OrG - Materials IV: Epoxy")

A Highly Reliable Cryogenic Mixing Pump with No Mechanical Moving Parts (in session "C1PoC - Aerospace")

A maintenance strategy for a multi-valve cryogenic distribution system (in session "C3PoD - Large Scale Systems, Facilities and Testing I")

A multi-stage heat-driven traveling-wave thermoacoustic refrigeration system operating at liquefied natural gas temperature (in session "C4OrC - Pulse Tube and Thermoacoustic Coolers: Large Scale Applications (Non-Aerospace)")

A NASA Perspective on Electric Propulsion Technologies for Large Commercial Aircraft (in session "Monday Plenary (8:15 - 9:00 a.m.) - Dr. Nateri Madavan, NASA Ames Research Center")

A new cryogenic temperature measurement solution suitable for large installation and laboratory use. (in session "C1PoK - Instrumentation, Visualization, and Controls I")

A new passive system for contamination-free long-distance cryo-transfer of biological tissues (in session "C1OrC - Medical Systems")

A numerical model for boiling heat transfer coefficient of zeotropic mixtures (in session "C3OrK - Hydrocarbons and Mixtures: Fluid Mechanics and Heat Transfer")

A Performance Analysis on Free-piston Stirling Crycooler based on an Idealized Mathematical Model (in session "C3OrA - Stirling Cryocooler Performance and Modeling")

A power recovery cascade pulse tube cryocooler with displacer (in session "C1PoA - Pulse Tube Performance")

A Review of Cryogenic Power Electronics Progress (in session "M1OrE - Focused Symposia - Propulsion IV: Power Electronics, Energy")

A route for simultaneous increase of Tc and Jc in FeSe0.5Te0.5 superconducting films by low-energy proton irradiation (in session "M3OrA - Focused Session: Latest Development in Flux Pinning II: LTS, Fe-based, Creep in HTS")

A Second-Generation Superconducting Undulator Cryostat for the APS (in session "C4OrB - Superconducting Magnet Systems")

A study of solid lubricant coating for gas bearing of turbine-expander (in session "C2PoB - Expanders I")

A tissue snap-freezing apparatus without sacrificial cryogens (in session "C1OrC - Medical Systems")

Aanlysis of the Effect of Natural Convection on Sample Temperature Fluctuation Cooled by GM Cryocooler (in session "C3PoF - Fluid Mechanics, Heat Transfer and Cryogen Properties II")

AC Loss Analysis in Fully Superconducting Machines (in session "M2OrC - Focused Symposia - Propulsion VI: Motors & Generators, Cryocool Technologies")

AC losses of Round Superconducting Cables Subjected to Time-dependent and/or Rotating Magnetic Fields (in session "M1PoE - Superconductors I: Measurements, Mechanical, Electrical, Stability, AC Loss")

Acoustic field characteristics in a free piston Stirling cryocooler with high cooling capacity (in session "C3OrA - Stirling Cryocooler Performance and Modeling")

Active acoustic quench detection for high-temperature superconductor wires and stacks (in session "M2OrB - YBCO Coated Conductors II: Processing & Properties")

Adaption of the LHC Cold Mass Cooling System to the requirements of the Future Circular Collider (FCC) (in session "C1PoG - Large Scale Refrigeration and Liquefaction I")

ADS injector I cryogenic control system (in session "C1PoL - Large Scale Controls")

Advanced tube type Nb3Sn conductor in Hyper Tech (in session "M1PoD - NbTi/Nb3Sn/A15 Processing & Properties II")

Advances in Bi-2212 Conductor Development Directed Toward High-Field Magnet Applications (in session "M3OrH - BSCCO Wires and Tapes II: Processing & Properties")

Advances in single- and multi-stage Stirling-type pulse tube cryocoolers for space applications in NLIP/SITP/CAS (in session "C4OrD - Aerospace Cryocoolers II")

Air Liquide Turbo-Brayton refrigeration system commissioning (in session "C2OrA - Cryogenic Power Cables and Leads II")

ALAT latest magnetic bearings turbomachines commissioning (in session "C1OrB - Expanders II")

An extremely high stability cooling system for planet hunter. (in session "C1PoE - Telescope Systems")

An Hybrid liquid nitrogen system to cool a large detector. (in session "C1PoE - Telescope Systems")

An Investigation of the Superconducting Properties of the beta-Mn (T1-xRx)3Al2C solid solutions (in session "M2PoF - Superconductors II: Fundamental, New Materials")

An overview of a repair of internal leak in the cold box of Helium liquefier made by Linde (in session "C2PoH - Large Scale Refrigeration and Liquefaction II")

Analysis of thermal stratification during initial active pressurization in a cryogenic propellant tank (in session "C1PoC - Aerospace")

Analytical analysis of mixture enthalpies (in session "C2PoD - Gas and Fluid Mixtures")

Analytical and numerical performance models of a Heisenberg Vortex Tube (in session "C2PoF - Novel Devices I")

Annular air leaks in a liquid hydrogen storage tank (in session "C1PoJ - Hydrogen Systems")

Applicability of ASST-A Helium Refrigeration System for JLab End Station Refrigerator Upgrade (in session "C3OrF - Large Scale Systems, Facilities and Testing II")

Application of the Langmuir Probe Plasma Diagnostics into the Investigation of the Dielectric Properties of Cryogenic Gas Mixtures (in session "C1OrF - Gas Mixture Properties and Behavior")

Application on turbo brayton refrigerator for world first commercialization on HTS power cable system (in session "C1PoB - Cryogenic Power Cables and Leads I")

Assembly and Commissioning of the helium cryogenic system for the hybrid superconducting outsert at CHMFL (in session "C3PoC - Cryogenic Distribution Systems")

Attenuation of cryocooler induced vibration in infrared imagers using multimodal tuned dynamic absorbers (in session "C2PoC - Aerospace Cryocoolers I")

Auger Electron Spectroscopy and Ar Sputtering for the Determination of Y2O3 Buffer Layer Thickness in REBCO Superconducting Tapes (in session "M1PoB - YBCO Coated Conductors I: Processing & Properties")

Available Pressure Ratio of A Linear Compressor Based on Mechanical Phasor Model (in session "C2OrB - Expanders, Pumps, Compressors and Regenerators")

Axial Fatigue Life of Three Austenitic Steels at 4 K (in session "M2OrG - Materials III: Processing of Metals and Alloys")

Balanced Design and Commissioning of a 500W@4.5K Helium Refrigerator and its Liquefier (in session "C2PoH - Large Scale Refrigeration and Liquefaction II")

Ball Aerospace Scalable Configurable Cryocooler Electronics (SCCE) (in session "C4OrD - Aerospace Cryocoolers II")

Behaviour of ITER flowmeters under operating conditions: simulation and experimentation (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Cable-in-Conduit – reliable, cost-effective dipole technology for 1 Tesla to 20 Tesla (in session "C4OrB - Superconducting Magnet Systems")

Calorimetric Measurements of Varying YBCO Conductors and Cables at High dB/dt in a Stator Machine Environment (in session "M2OrB - YBCO Coated Conductors II: Processing & Properties")

Canted-Cosine-Theta accelerator magnets wound from high-temperature superconducting CORC® magnet wires (in session "M2OrD - HTS and LTS Cables II")

Capacitive density measurement for supercritical hydrogen (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Cascading pulse tubes on a large diaphragm pressure wave generator to increase liquefaction potential. (in session "C4OrC - Pulse Tube and Thermoacoustic Coolers: Large Scale Applications (Non-Aerospace)")

CFD Modeling of a helium cryogenic pulsating heat pipe (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

CFD Modeling of Liquid Nitrogen Spray Cooling (in session "C3OrG - Nitrogen Fluid Mechanics and Heat Transfer")

CFD Research on Hydrodynamic Gas Bearings with Different styles of Grooves (in session "C1PoD - Pumps, Compressors and Expanders")

CFD studied on heat transfer and pressure drop characteristics of an offset strip-fin heat exchanger in helium systems. (in session "C2PoL - Large Scale Simulation")

Characteristics of a 1.6 W Gifford-McMahon cryocooler with a double pipe regenerator (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Characterization of reinforced Bi-2212 conductors for high field magnet applications (in session "M3OrH - BSCCO Wires and Tapes II: Processing & Properties")

Characterization of YBa2Cu3O7 thin films on miscut LSAT substrates (in session "M2PoC - Focused Session: Latest Development in Flux Pinning I: Flux Pinning, Critical Currents")

Characterization Testing of Lockheed Martin High-Power Micro Pulse Tube Cryocooler (in session "C4OrD - Aerospace Cryocoolers II")

Characterizing thin films by RF and DC methods (in session "M1OrD - Focused Session: Superconducting Thin Films for SRF and Magnets Applications")

Cold Test and Performance Evaluation of Prototype Cryoline-X (in session "C3PoD - Large Scale Systems, Facilities and Testing I")

Commercial fabrication of 2G HTS Roebel cables using the “Punch-and-Coat” approach (in session "M1PoB - YBCO Coated Conductors I: Processing & Properties")

Commissioning and first cooldown of XFEL linac (in session "C2OrD - Large Scale Refrigeration and Liquefaction III")

Commissioning and Testing of a new 4.5K Cold Box for JLab Cryogenic Test Facility (in session "C2PoH - Large Scale Refrigeration and Liquefaction II")

Commissioning of Cryogenic System for China Spallation Neutron Source (in session "C3PoC - Cryogenic Distribution Systems")

Commissioning of multistage cold compressor systems (in session "C2OrB - Expanders, Pumps, Compressors and Regenerators")

Comparative Analysis of Linear motor geometry for a Stirling Cryocooler (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Comparative Study on the effect of Laser Energy Density on YGBCO and HGBCO Thin Film Prepared by PLD (in session "M1PoB - YBCO Coated Conductors I: Processing & Properties")

Comparison of cryogenic process control strategies using simulation software and applied to a superconducting magnet test bench at CERN. (in session "C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.")

Comparison of cryorolling impacts on properties of 316LN stainless steel and non-oriented electrical steel (in session "M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals")

Comparison of estimated and experimental results of temperature distribution in a thermosyphon cooling system (in session "C3PoE - Cryogenics for Superconducting Machines")

Comparison Study of the Flux Pinning Enhancement of YBCO Superconductor with BZO and BZO + Y2O3 Mixed Phase Additions (in session "M2PoC - Focused Session: Latest Development in Flux Pinning I: Flux Pinning, Critical Currents")

Competition between the significant scale lengths influing on the transport phenomena at very low temperature in InP semiconductor (in session "M2PoA - Materials I: Physical Properties")

Computational Electro Dynamic (CED) Analysis to Estimate the AC losses in High Temperature Superconducting Cables (in session "C2OrA - Cryogenic Power Cables and Leads II")

Computational Fluid Dynamics Model of a 3D Printed Liquid Hydrogen Tank with Vapor Cooled Shielding for Use in Unmanned Aerial Vehicles (in session "C2PoA - Thermal Insulation Systems I")

Computational Investigation of Superconducting Magnetic Energy Storage (SMES) Devices to Optimize Energy Density (in session "M1PoA - Focused Symposia - Propulsion III: Materials, Technologies, Drivetrain Machines")

Conceptual design of a cryogen-free μ-MRI device (in session "C1OrC - Medical Systems")

Conceptual design of the cryostat for the new high luminosity (HL-LHC) triplet magnets (in session "C4OrB - Superconducting Magnet Systems")

Conceptual study of the cryostats for the cold powering system for the triplets of the High Luminosity LHC (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

Continuous transport and magnetization measurements on production coated conductors (in session "M2PoC - Focused Session: Latest Development in Flux Pinning I: Flux Pinning, Critical Currents")

Control strategy of helium twin screw compressor unit for large cryogenic system (in session "C1PoD - Pumps, Compressors and Expanders")

Coolant-free Cryogenic Mechanical Property Test System with Optical Windows (in session "C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.")

Cooldown studies for the superconducting coils of the hybrid magnet at CHMFL (in session "C2PoG - Superconducting Magnet Systems - Experimental Studies")

Cooling Down Time Optimization of the stirling cooler (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Coupled Cryogenic Thermal and Electrical Models for Transient Analysis of Superconducting Power Systems (in session "C3PoE - Cryogenics for Superconducting Machines")

Cryogen Risk Assessment in Underground Mining (in session "C2OrC - Safety")

Cryogenic Design of an Integrated Cooling System for Three-Phase SFCL (in session "C1PoB - Cryogenic Power Cables and Leads I")

Cryogenic electrical property of Cyanate ester/epoxy insulation material for fusion superconducting magnet (in session "M2PoA - Materials I: Physical Properties")

Cryogenic Permeation of Helium and Hydrogen through Polymer Films (in session "C2PoA - Thermal Insulation Systems I")

Cryogenic safety in helium cryostat at CERN (in session "C2OrC - Safety")

Cryogenic test facility instrumentation with fiber optic and fiber optic sensors for testing superconducting accelerator magnets (in session "C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.")

Cryogenic Testing of the Thermal Vacuum Chamber and Ground Support Equipment for the James Webb Space Telescope in Chamber A at Johnson Space Center (in session "C1OrD - Aerospace: JWST and Propellant Storage")

Cryogenic Thermal Conductivity of Gaseous Helium mixtures with Neon and Hydrogen at High Pressures (in session "C1OrF - Gas Mixture Properties and Behavior")

Cryogenic thermal emissivity measurements on small-diameter stainless steel tubing (in session "C1PoC - Aerospace")

Cryogenic transfer line coupling for ITER vacuum pumping system (in session "C3PoD - Large Scale Systems, Facilities and Testing I")

Cryogenic transfer line for the hybrid superconducting outsert at CHMFL (in session "C3PoD - Large Scale Systems, Facilities and Testing I")

Cryogenic Upgrade of the Low Heat Load Liquid Helium Cryostat used to House the Cryogenic Current Comparator in the Antiproton Decelerator at CERN (in session "C2PoA - Thermal Insulation Systems I")

Cryogenics for Mining Safety (in session "C2OrC - Safety")

Cryosorption of helium and nitrogen on activated carbon-combined experiment and simulation study (in session "C2PoD - Gas and Fluid Mixtures")

Crystallographic Orientation Analysis of Facets in Ti-5Al-2.5Sn ELI Forged Alloy (in session "M2OrG - Materials III: Processing of Metals and Alloys")

Current distribution in field-cooled $YBa_2Cu_3O_7$ and $MgB_2$ disks as deduced from levitation force and trapped field measurements carried out in a large temperature range (in session "M1OrB - HTS and MgB2 Bulk I")

Current sharing, quench, and normal zone propagation in YBCO CORC cables (in session "M1PoE - Superconductors I: Measurements, Mechanical, Electrical, Stability, AC Loss")

Deformation behaviour and microstructure of a Ni-Mo-Cr alloy at cryogenic temperatures (in session "M2OrG - Materials III: Processing of Metals and Alloys")

Demonstration of a Wind and React Nb3Sn Solenoidal Coil Segment for MRI Application (in session "M1PoC - NbTi/Nb3Sn/A15 Processing & Properties I")

Demonstration of New 3 to 4 mm Thin ReBCO-CORC Wires featuring 300 to 500 A/mm2 at 10T/4.2K (in session "M1PoB - YBCO Coated Conductors I: Processing & Properties")

Design and experimental measurements of a Heisenberg Vortex Tube for hydrogen cooling (in session "C2PoF - Novel Devices I")

Design and Manufacturing of the Cryogenic Cooling System for the Rotating Magnetic Validator of the 10 MW SUPRAPOWER Offshore Superconducting Wind Turbine (in session "C2PoE - Industrial Applications")

Design and Manufacturing of the Mu2e Cryogenic Distribution Box (in session "C3PoD - Large Scale Systems, Facilities and Testing I")

Design and performance assessment of Cold compressor for typical Cold Box of the large tokamak machine (in session "C1PoD - Pumps, Compressors and Expanders")

Design and Performance Considerations for Superconducting Magnets in the Material Plasma Exposure eXperiment (in session "M1PoC - NbTi/Nb3Sn/A15 Processing & Properties I")

Design and Performance testing of an External helium purifier for the cryogenic system at CHMFL (in session "C1PoH - Purification Systems")

Design and test of the Stirling-type Pulse Tube Cryocooler (in session "C1PoA - Pulse Tube Performance")

Design Aspects for DC-HTS Cables in Hybrid-Electric Propulsion Systems for Aircraft (in session "M2OrE - Focused Symposia - Propulsion VII: Wires & Cables")

Design of Cryogenic System for SBN Near Detector at Fermilab (in session "C3PoC - Cryogenic Distribution Systems")

Design of the Continuous Adiabatic Demagnetization Refrigerators for the Primordial Inflation Explorer (PIXIE) (in session "C3OrH - Aerospace Sub-Kelvin Cryocoolers")

Design of the Cryogenic Systems for the Near and Far LAr-TPC Detectors of the Short Baseline Neutrino Program (SBN) at Fermilab (in session "C3OrJ - Large Scale Systems, Facilities and Testing III")

Design Optimization of a Superconducting Gas-Insulated Transmission Line (in session "M1PoA - Focused Symposia - Propulsion III: Materials, Technologies, Drivetrain Machines")

Design, Fabrication, Installation and Commissioning of the Helium Refrigeration system Supporting Superconducting Radio Frequency Testing at Facility for Rare Isotope Beams at Michigan State University (in session "C2PoH - Large Scale Refrigeration and Liquefaction II")

Designing Calculation and Experimental Study of Sub-atmospheric Plate-fin Heat Exchanger for Superfluid Helium Refrigeration System (in session "C2PoJ - Fluid Mechanics, Heat Transfer and Cryogen Properties I")

Detector Magnets proposed for the Future Circular ee+ and pp Colliders (in session "C4OrB - Superconducting Magnet Systems")

Development and Performance Evaluation of High Speed Cryogenic Turboexpanders at BARC, India (in session "C1OrB - Expanders II")

Development and testing of a thermal switch used in an integrated cooler system (in session "C2PoA - Thermal Insulation Systems I")

Development and Testing of High Temperature Superconducting (HTS) field coil for HTS Motors (in session "C3PoE - Cryogenics for Superconducting Machines")

Development of 2G HTS wire production at SuperOx (in session "M2OrD - HTS and LTS Cables II")

Development of (Ba,K)Fe2As2/stainless steel/(Ag-Sn) double sheath tapes (in session "M4OrB - Superconductors IV: Pnictide Materials")

Development of a Dynamic Simulator for a 250 W@4.5 K Helium Refrigerator (in session "C2PoL - Large Scale Simulation")

Development of a lab-scale YBCO based High-Tc Superconducting Power cable (in session "C1PoB - Cryogenic Power Cables and Leads I")

Development of a rotary union for Gifford-McMahon cryocoolers utilized in a 10 MW Offshore Superconducting Wind Turbine (in session "C2PoE - Industrial Applications")

Development of a space-flight ADR providing continuous cooling at 50 mK with heat rejection at 10 K (in session "C3OrH - Aerospace Sub-Kelvin Cryocoolers")

Development of an Algorithm for Fault Recovery Time of Resistive Type Superconducting Fault Current Limiter used in SMES Applications (in session "C2PoM - Superconducting Magnet Systems - HTS")

Development of femtosecond laser vacuum cryogenic system (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Development of high-temperature superconducting CORC® power transmission cable systems (in session "M1OrE - Focused Symposia - Propulsion IV: Power Electronics, Energy")

Development of MgB2 superconductor wire and coils for practical applications at Hyper Tech Research (in session "M2OrF - MgB2 Wires and Tapes: Processing & Properties")

Development of NbTiN based multi-layered structures for SRF applications (in session "M1OrD - Focused Session: Superconducting Thin Films for SRF and Magnets Applications")

Development of round flexible HTS CORC® wires for fault current limiting applications (in session "M2OrE - Focused Symposia - Propulsion VII: Wires & Cables")

Development of stable, low resistance solder joints for space-flight HTS lead assemblies (in session "M3OrB - Superconductors III: Measurements, Mechanical, Electrical, Stability, AC Loss")

Development of the HTS magnet system for Lorentz Force Velocimetry (in session "C2PoM - Superconducting Magnet Systems - HTS")

Development of zinc-plated regenerator material (in session "C3OrD - Regenerators and GM Coolers (Non-Aerospace)")

Development status of a high cooling capacity single stage pulse tube cryocooler (in session "C1PoA - Pulse Tube Performance")

Digital Readout of Cryogenic Detectors using Superconductor Integrated Circuits (in session "M3OrF - Focused Session: Cryogenic Microelectronics & Materials II")

Displacer Diameter Effect in Displacer Pulse Tube Refrigerator (in session "C1OrG - Pulse Tube Components")

DNB heat flux in forced convection of liquid hydrogen for a wire set in central axis of vertically mounted flow channel (in session "C3PoF - Fluid Mechanics, Heat Transfer and Cryogen Properties II")

DOCO-HTS-Roebel cables, a concept for higher currents (in session "M1PoF - HTS and LTS Cables I")

Doping Effect of Dy2O3 on the Phase Formation in the MgB2 Wire Prepared by Advanced Internal Magnesium Infiltration (AIMI) Method (in session "M2OrF - MgB2 Wires and Tapes: Processing & Properties")

Dynamic Simulation of Relief Line during Loss of Insulation Vacuum of the ITER Cryoline (in session "C3OrB - Large Scale Refrigeration and Liquefaction IV")

Effect of Carbon and Dy2O3 co-doping on the Critical Field and Transport of MgB2 wires (in session "M2OrF - MgB2 Wires and Tapes: Processing & Properties")

Effect of electrical breakdown on critical current of second generation HTS tapes (in session "C2OrA - Cryogenic Power Cables and Leads II")

Effect of external contaminants on RRR of Nb3Sn strands for the HL-LHC Accelerator Upgrade Project (in session "M1PoD - NbTi/Nb3Sn/A15 Processing & Properties II")

Effect Of Leading-edge Geometry And Thickness On The Performance Of Miniature Cryogenic Expansion Turbine (in session "C2PoB - Expanders I")

Effect of sheath material and reaction overpressure on Ag extrusions into the TiO2 insulation coating of Bi-2212 round wire (in session "M2PoD - BSCCO Wires and Tapes I: Processing & Properties")

Effect of Surface Condition to Temperature Distribution in Living Tissue during Cryopreservation (in session "C1OrC - Medical Systems")

Effect of Thermomechanical Processing of 316LN Austenitic Stainless Steel on Microstructure and Mechanical Properties at Cryogenic Temperatures (in session "M2OrG - Materials III: Processing of Metals and Alloys")

Effect of Y2O3 pinning on the magnetic properties of Y123 superconductor (in session "M2PoC - Focused Session: Latest Development in Flux Pinning I: Flux Pinning, Critical Currents")

Effects of High Level Gamma Radiation Doses on Cernox(TM) Cryogenic Temperature Sensors (in session "C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.")

Effects of Thermal Acoustic Oscillations On LCLS-II Cryomodule Testing (in session "C1OrE - Superconducting RF Systems")

Efficacy of Tantalum Tungsten Alloys for Diffusion Barrier Applications (in session "M1PoD - NbTi/Nb3Sn/A15 Processing & Properties II")

Efficient biostorage below -150 degrees C without sacrificial cryogen (in session "C1OrC - Medical Systems")

Electromagnetic field analyses of cated conductors assembled into large-current cables (in session "M3OrB - Superconductors III: Measurements, Mechanical, Electrical, Stability, AC Loss")

Enhanced transport performance of superconducting Ba1-xKxFe2As2 wires induced by biaxially cold high pressure densification (BCPD) (in session "M4OrB - Superconductors IV: Pnictide Materials")

Entransy dissipation based-thermal resistance and exergy analysis on helium liquefier (in session "C2PoL - Large Scale Simulation")

Epoxy Tensile Testing at Cryogenic Temperatures (in session "M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals")

Equivalent Isentropic Expansion Efficiency of Real Fluid Subject to Concurrent Pressure Drop and Heat Transfer (in session "C2OrF - Helium and Oxygen Fluid Mechanics and Heat Transfer")

Evaluation of the cryogenic mechanical properties of the insulation material for ITER Feeder superconducting joint (in session "M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals")

Evaluation of the Fretting Resistance of the High Voltage Insulation on the ITER Magnet Feeder Busbars (in session "M3OrG - Materials IV: Epoxy")

Experimental and Computational studies of Heat Transfer for Wall-type and Fin-type Heat Exchanger (in session "C2PoJ - Fluid Mechanics, Heat Transfer and Cryogen Properties I")

Experimental and numerical investigation on residual stress relaxation of 7050 aluminum alloy by cryogenic treatment (in session "M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals")

Experimental Characterization of Gallium-Nitride Field-Effect Transistors at Cryogenic Temperatures and Application in Multilevel Inverter (in session "M1OrE - Focused Symposia - Propulsion IV: Power Electronics, Energy")

Experimental Effervescence Measurements of Nitrogen in Liquid Methane-Ethane Mixtures to Support an Extraterrestrial Submarine for Titan (in session "C1OrF - Gas Mixture Properties and Behavior")

Experimental investigation into the fault response of a superconducting hybrid electric propulsion electrical power system to a DC rail to rail fault (in session "M1OrA - Focused Symposia - Propulsion I: Overview, System Level")

Experimental investigation on charcoal adsorption for cryogenic pump application (in session "C1PoD - Pumps, Compressors and Expanders")

Experimental progress of a 4K VM/PT hybrid cryocooler for pre-cooling 1K sorption cooler (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Experimental Studies on the Cryogenic Dielectric Properties of Gas Mixtures for Superconducting Power Applications (in session "C1OrF - Gas Mixture Properties and Behavior")

Experimental study of a two-phase nitrogen natural circulation loop (in session "C3OrG - Nitrogen Fluid Mechanics and Heat Transfer")

Experimental study of Large-scale cryogenic Pulsating Heat Pipe (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

Experimental study on cavitating flow of liquid nitrogen over a three-dimensional hydrofoil (in session "C3OrG - Nitrogen Fluid Mechanics and Heat Transfer")

Experimental study on micro-solid particulate spray vitrification for biological material long-term preservation. (in session "C3PoF - Fluid Mechanics, Heat Transfer and Cryogen Properties II")

Experimental validation of a self-calibrating cryogenic mass flowmeter (in session "C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.")

Fabrication of 2G HTS wires with artificial pinning centres using production scale PLD system and characterisation of their superconducting properties (in session "M3OrC - Focused Session: Latest Development in Flux Pinning III: Pinning, Critical Currents & Creep in HTS")

Fabrication of long-length cable-in-conduit for superconducting magnets (in session "M1PoF - HTS and LTS Cables I")

Fatigue and Fracture of Three Austenitic Stainless Steels at Cryogenic Temperatures (in session "M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals")

Feasibility Analysis, Technical Challenges, and Potential Solutions for Cross-country Multi-Terminal Superconducting DC Power Cables (in session "M1PoF - HTS and LTS Cables I")

Fermilab CMTF Multi-Level Cryogenic Distribution Control System (in session "C1PoL - Large Scale Controls")

Ferromagnetism and superconducting-like behavior in carbon allotropes (in session "M2PoF - Superconductors II: Fundamental, New Materials")

Filament Damage in Bi2Sr2CaCu2O8-x (Bi-2212) Superconducting Wires as Revealed by External Etching (in session "M2PoD - BSCCO Wires and Tapes I: Processing & Properties")

Final design of a cost-optimized 100 tpd hydrogen liquefier (in session "C3OrJ - Large Scale Systems, Facilities and Testing III")

Final Test Results for the Ground Operations Demonstration Unit for Liquid Hydrogen (in session "C1PoJ - Hydrogen Systems")

Finite element investigation of the mechanical behavior of Twisted Stacked-Tape Cables exposed to large Lorentz loads (in session "M1PoF - HTS and LTS Cables I")

First experiment on liquid hydrogen transportation by ship inside Osaka bay (in session "C1PoJ - Hydrogen Systems")

First operation of the XFEL linac with the 2K cryogenic system (in session "C2OrD - Large Scale Refrigeration and Liquefaction III")

First operational experience with the HIE-Isolde helium cryogenic system including several RF cryo-modules (in session "C3OrJ - Large Scale Systems, Facilities and Testing III")

Flow balancing orifice for ITER Toroidal Field coil (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Focused Helium Ion Beam Irradiated Josephson Junctions and Arrays (in session "M3OrD - Focused Session: Cryogenic Microelectronics & Materials I")

Force cooled Quench Tanks for the ITER cryogenic system (in session "C3PoC - Cryogenic Distribution Systems")

Frequency loss Induced Quench Protection System for High Temperature Superconductors (in session "C1PoK - Instrumentation, Visualization, and Controls I")

FRIB Cryogenic Systems Status (in session "C3OrB - Large Scale Refrigeration and Liquefaction IV")

Full-Scale Prototype Cryoviscous Compressor Demonstration at SNS Cryogenic Test Facility for ITER Vacuum System (in session "C2OrB - Expanders, Pumps, Compressors and Regenerators")

Gas propagation following a sudden loss of vacuum in a pipe cooled by He I and He II. (in session "C2PoE - Industrial Applications")

Glass Pulse-Tube Cryocooler (in session "C1PoA - Pulse Tube Performance")

Growth of FeSe single crystals and fundamental characterization of doping and intercalation (in session "M2PoF - Superconductors II: Fundamental, New Materials")

Growth rate of YBCO-Ag single grains grown by liquid-phase enriched top seeded melt growth (in session "M2PoE - HTS and MgB2 Bulk II")

Heat Loads Due to Small Penetrations in Multilayer Insulation Blankets (in session "C3OrE - Thermal Insulation Systems II - sponsored by CAD Cut")

High efficiency 40 K single-stage Stirling-type pulse tube cryocooler (in session "C1PoA - Pulse Tube Performance")

High Temperature Superconducting Power Devices and Its Cryogenic Systems (in session "C1PoB - Cryogenic Power Cables and Leads I")

High-field transport properties of a P-doped BaFe2As2 film on technical substrate (in session "M4OrB - Superconductors IV: Pnictide Materials")

High-Jc FeSe0.5Te0.5 thin films fabricated on less-well-textured flexible coated conductor templates (in session "M4OrB - Superconductors IV: Pnictide Materials")

Impact of large beam-induced heat loads on the transient operation of the beam screens and cryogenic plants of the Future Circular Collider (FCC) (in session "C1PoG - Large Scale Refrigeration and Liquefaction I")

Impact of Varying Acceleration to the Performance of Stirling-Type Pulse Tube Cryocooler (in session "C3PoA - Pulse Tube Cryocoolers (Aerospace)")

Improvement of Nb Thin FIlm MIcrostructure by HiPIMS (in session "M1OrD - Focused Session: Superconducting Thin Films for SRF and Magnets Applications")

Improvement of stability of Nb3Sn conductors and magnets by increasing specific heat (in session "M1PoD - NbTi/Nb3Sn/A15 Processing & Properties II")

In-depth characterization of low temperature high voltage axial insulator breaks for the ITER cryogenic supply line (in session "M2PoA - Materials I: Physical Properties")

Influence of Minor Geometric Imperfections on Stirling Pulse Tube Cryocooler (in session "C1OrG - Pulse Tube Components")

Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables (in session "M1PoF - HTS and LTS Cables I")

Influence of Regenerative Material on Performance of 6K Level High Frequency Pulse Tube Cryocooler (in session "C1PoA - Pulse Tube Performance")

Influence of Twist Pitch on Hysteretic Losses and Transport Jc in Overpressure Processed Bi-2212 Round Wires (in session "M3OrH - BSCCO Wires and Tapes II: Processing & Properties")

Influence of ultrafine-grained copper by ECAP on thermal properties at cryogenic conditions (in session "M2OrG - Materials III: Processing of Metals and Alloys")

Influence of Zr addition on J¬c and flux creep in (Gd,Y)BCO tape (in session "M3OrC - Focused Session: Latest Development in Flux Pinning III: Pinning, Critical Currents & Creep in HTS")

Influence on the performance of cryogenic counter-flow heat exchangers due to longitudinal conduction, heat in-leak and property variations (in session "C3OrK - Hydrocarbons and Mixtures: Fluid Mechanics and Heat Transfer")

Innovations in High Efficiency Commercial Pulse Tube Cooler (in session "C4OrC - Pulse Tube and Thermoacoustic Coolers: Large Scale Applications (Non-Aerospace)")

Innovative thin film technologies for nano-engineering and optimizing Nb3Sn superconductor beyond state-of-the-art (in session "M1OrD - Focused Session: Superconducting Thin Films for SRF and Magnets Applications")

Integration of Prototype Cryoviscous Compressor into SNS Cryogenic Test Facility for Demonstration Performance Characterization (in session "C2OrB - Expanders, Pumps, Compressors and Regenerators")

Interferometric study on the mass transfer in cryogenic distillation under magnetic field (in session "C4OrA - Novel Devices II")

Intrinsic limitation on the cooling power of the JT cryocoolers (in session "C1OrA - JT & Reverse Brayton Coolers (Non-Aerospace)")

Investigation of a working fluid for cryogenic energy storage systems. (in session "C2PoE - Industrial Applications")

Investigation of single stage high-efficiency stirling-type pulse tube cryocooler below 20K (in session "C3PoA - Pulse Tube Cryocoolers (Aerospace)")

Investigation of transient chill down phenomena in pipes using liquid nitrogen (in session "C3PoF - Fluid Mechanics, Heat Transfer and Cryogen Properties II")

Investigation on a two-cold-finger pulse tube cryocooler (in session "C3PoA - Pulse Tube Cryocoolers (Aerospace)")

Investigation on characteristics of inertance tube at different operating frequencies: coiled type and material (in session "C1OrG - Pulse Tube Components")

Investigation on the Crack Propagation Behaviour of Kevlar®-49/Epoxy Laminate at Room and Cryogenic Temperatures for Aerospace Applications (in session "M3OrG - Materials IV: Epoxy")

Investigations of Heat Transfer in Vacuum Between Room Temperature and 80 K (in session "C3OrE - Thermal Insulation Systems II - sponsored by CAD Cut")

ITER CSMC refrigerator model using Modelica (in session "C3OrB - Large Scale Refrigeration and Liquefaction IV")

Lagrangian Description of the Oscillating Flow in Regenerator of High-Frequency Pulse Tube Refrigerator (in session "C3OrD - Regenerators and GM Coolers (Non-Aerospace)")

Large capacity two-stage pulse tube cryocoolers (in session "C4OrC - Pulse Tube and Thermoacoustic Coolers: Large Scale Applications (Non-Aerospace)")

Large critical current densities and pinning forces in CSD YxGd1-xBa2Cu3O7-BaHfO3 superconducting nanocomposite films (in session "M3OrC - Focused Session: Latest Development in Flux Pinning III: Pinning, Critical Currents & Creep in HTS")

Large Diameter, Single Grain (RE)BCO Bulk Superconductors Fabricated by Infiltration and Growth (in session "M1OrB - HTS and MgB2 Bulk I")

Large Scale Production of Densified Hydrogen to the Triple Point and Below (in session "C1OrD - Aerospace: JWST and Propellant Storage")

LCLS-II 1.3 GHz Cryomodule Design - Lessons Learned from Testing at Fermilab (in session "C1OrE - Superconducting RF Systems")

LCLSII 2K Cold Box and Internal Piping System Mechanical Design & Analysis (in session "C1PoG - Large Scale Refrigeration and Liquefaction I")

Liquid Air Energy Storage: How cryogenics can support a greener grid. (in session "Tuesday Plenary (8:15 - 9:00 a.m.) - Richard Riley, Highview Power Storage")

Liquid Hydrogen Recirculation System for Forced Flow Cooling Test of Superconducting Cables (in session "C3PoF - Fluid Mechanics, Heat Transfer and Cryogen Properties II")

Liquid Hydrogen Supported Foil Bearings for Launch Vehicle Propellant Densification (in session "C1OrD - Aerospace: JWST and Propellant Storage")

Liquid nitrogen cooling test with linear driven Stirling cryocooler (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Loss Characteristics of Coated Conductors in Alternating Magnetic Fields: Dynamic Loss and Magnetisation Loss (in session "M3OrB - Superconductors III: Measurements, Mechanical, Electrical, Stability, AC Loss")

Low cost high performance magnetocaloric materials for sub 50K refrigeration applications (in session "M3OrG - Materials IV: Epoxy")

Low Temperature Binary Gas Mixtures (in session "C1OrF - Gas Mixture Properties and Behavior")

Low Temperature Electrical Transport Studies on Fe Doped (110)-Oriented PrBa2Cu3O7 Thin Films. (in session "M2PoA - Materials I: Physical Properties")

Lumped Multi-Bubble Analysis of Injection Cooling System for Storage of Cryogenic Liquids (in session "C2OrF - Helium and Oxygen Fluid Mechanics and Heat Transfer")

Magnetoresistance of The Cryogenic Linear Temperature Sensor (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Main improvements of LHC Cryogenics Operation during Run 2 (2015-2018) (in session "C2OrD - Large Scale Refrigeration and Liquefaction III")

Measurements of a Parallel Channel Adjustable Inertance Tube (in session "C1PoA - Pulse Tube Performance")

Measurements of YBCO Cable at High dB/dt for various HTS cables (in session "M3OrB - Superconductors III: Measurements, Mechanical, Electrical, Stability, AC Loss")

Mechanical and axial fatigue behavior of 18 percent Nickel Maraging steel C250 for cryogenic applications (in session "M2OrG - Materials III: Processing of Metals and Alloys")

Mechanical Design of a 4-Stage ADR for the PIPER Mission (in session "C3OrH - Aerospace Sub-Kelvin Cryocoolers")

Mechanical properties of AA2219-T8 at low temperatures (in session "M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals")

MgB2 thin films for SRF cavity applications (in session "M1OrD - Focused Session: Superconducting Thin Films for SRF and Magnets Applications")

Micro-structured heat exchanger for cryogenic mixed refrigerant cycles (in session "C3OrK - Hydrocarbons and Mixtures: Fluid Mechanics and Heat Transfer")

Microstructure and superconducting properties of Bi,Pb-2223 thin films fabricated from alternately layered Bi,Pb-2212/Pb-Ca-Cu-O thin films (in session "M2PoD - BSCCO Wires and Tapes I: Processing & Properties")

Miniature PT Cryocooler Activated by Resonant Piezoelectric Compressor and Passive Warm Expander (in session "C1OrG - Pulse Tube Components")

MIRI Cooler Subsystem Test Facility Design and Performance (in session "C4OrD - Aerospace Cryocoolers II")

Mixture Optimization for Mixed Gas Joule-Thomson Cycle (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Mobile Refrigeration System for Precool and Warmup of Superconducting Magnet (in session "C1PoM - Superconducting Magnet Systems - Cryogenics")

Model-based minimization algorithm of a supercritical helium loop consumption subject to operational constraints (in session "C3OrF - Large Scale Systems, Facilities and Testing II")

Model-based PI tuning for the JT-60SA cryogenic system: experimental results (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Modeling of Combined Heat Transfer in an all Solid State Optical Cryocooler (in session "C4OrA - Novel Devices II")

Modeling studies of cryogen free MRI magnets based on MgB2 and Nb3Sn superconductors (in session "C2PoM - Superconducting Magnet Systems - HTS")

Modelling of a stirling cryocooler regenerator under steady and steady - periodic flow conditions using a correlation based method (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Modelling the Effects of Dissolved Helium Pressurant on a Liquid Hydrogen Rocket Propellant Tank (in session "C2PoD - Gas and Fluid Mixtures")

New flow pattern transition of R600a in a horizontal smooth tube (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

New heat transfer model for Hydrocarbons flow condensation inside horizontal tubes (in session "C3PoF - Fluid Mechanics, Heat Transfer and Cryogen Properties II")

New ReBCO-CORC Cable-In-Conduit Conductors for 80kA@12T/4K with stainless steel and copper jackets for use in Fusion and Detector Magnets (in session "M2OrD - HTS and LTS Cables II")

Niobium for Long-Length Fine-Filament Nb3Sn Conductors (in session "M1PoC - NbTi/Nb3Sn/A15 Processing & Properties I")

Niobium tube for superconducting RF cavities (in session "M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals")

Non-destructive investigation of hybrid of ferromagnet /(RE)BCO large grain bulks by flux extraction magnetometry and levitation force (in session "M1OrB - HTS and MgB2 Bulk I")

Novel Methods for Improving Nb$_3$Sn Powder in Tube Conductors for the FCC and Beyond (in session "M1OrF - Focused Session: Pushing Nb3Sn Conductors Beyond the State of the Art")

Novel Simulation Model for GM type Orifice Pulse Tube Cryocooler (in session "C1PoA - Pulse Tube Performance")

Numerical analysis of free convection in cold helium vapor flows in a long sloped pipe (in session "C2OrF - Helium and Oxygen Fluid Mechanics and Heat Transfer")

Numerical analysis of inertance pulse tube cryocooler with a modified reservoir (in session "C1PoA - Pulse Tube Performance")

Numerical and analytical modeling of cryogenic carbon capture in a de-sublimating heat exchanger (in session "C2PoJ - Fluid Mechanics, Heat Transfer and Cryogen Properties I")

Numerical and experimental investigations of condensation heat transfer of R170 in a horizontal smooth tube (in session "C3PoF - Fluid Mechanics, Heat Transfer and Cryogen Properties II")

Numerical and experimental study of an annular pulse tube used in the pulse tube cooler (in session "C1OrG - Pulse Tube Components")

Numerical and Experimental Study of the Performance Effect of Varying Vaneless Space in Turboexpander Nozzles (in session "C2PoB - Expanders I")

Numerical investigation of cryogen re-gasification in a plate heat exchanger (in session "C3OrK - Hydrocarbons and Mixtures: Fluid Mechanics and Heat Transfer")

Numerical Investigation on Pulsating Heat Pipes with Nitrogen and Hydrogen (in session "C3OrC - Heat Transfer")

Numerical investigation on shell side heat transfer and pressure drop in gas flow for spiral-wound heat exchangers (in session "C2PoJ - Fluid Mechanics, Heat Transfer and Cryogen Properties I")

Numerical model of cryogenic gas dispersion with phase change of water (in session "C2PoD - Gas and Fluid Mixtures")

Numerical simulation of the heat and mass transfer within a sorption-compressor cell for cryogenic cooling (in session "C2PoC - Aerospace Cryocoolers I")

Numerical Study of a Cryogen-free Vuilleumier Type Pulse Tube Cryocooler Operating below 10 K (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Numerical study of a novel coupled VM-PTC cryocooler with He3 as working fluid by Sage (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Numerical study of a VM type multi-bypass pulse tube cryocooler operating at 4K (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Numerical Study of Evaporation and Motion Characteristics of Liquid Nitrogen Droplet in High-Speed Gas Flow (in session "C3OrG - Nitrogen Fluid Mechanics and Heat Transfer")

Numerical study of longitudinal inclination effect on a tubular BOG heat exchanger (in session "C3OrK - Hydrocarbons and Mixtures: Fluid Mechanics and Heat Transfer")

Numerical study on the flow and heat transfer characteristics of slush nitrogen in a corrugated pipe (in session "C3OrG - Nitrogen Fluid Mechanics and Heat Transfer")

Operational Experience from LCLS-II Cryomodule Testing (in session "C1OrE - Superconducting RF Systems")

Operational Present Status and Reliability Analysis of the Upgraded EAST Cryogenic System (in session "C3OrJ - Large Scale Systems, Facilities and Testing III")

Optimization Design of Turbo-expander Gas Bearing for a 500W Helium Refrigerator (in session "C2PoB - Expanders I")

Optimized (Nb,Ti)3Sn multifilamentary wire with ZrO2 APCs for high Jc, high Bc2, and low AC loss (in session "M1PoD - NbTi/Nb3Sn/A15 Processing & Properties II")

Outgassing characteristics of various materials in the vacuum jacket of the large liquefied hydrogen vessel (in session "C3OrE - Thermal Insulation Systems II - sponsored by CAD Cut")

Outsourcing strategy and tendering methodology for the operation and maintenance of CERN’s cryogenic facilities (in session "C3OrF - Large Scale Systems, Facilities and Testing II")

Overview of a low exported force and torque measurement facility (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Overview of Cooling Technologies for Cryogenic Transportation Machines (in session "M2OrC - Focused Symposia - Propulsion VI: Motors & Generators, Cryocool Technologies")

Overview of process control strategies for typical helium cryogenic warm compression stations at CERN (in session "C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.")

Oxygen doping in MgB2 thin film and bulk samples (in session "M2PoE - HTS and MgB2 Bulk II")

Parametric studies on floating pad journal bearing for high speed cryogenic turboexpanders (in session "C2PoB - Expanders I")

Parametric study for use of stainless steel as a material for thermal shield in PIP2IT transferline at Fermilab (in session "C3OrE - Thermal Insulation Systems II - sponsored by CAD Cut")

Parametric study on the thermal performance of beam screen samples of the High-Luminosity LHC upgrade (in session "C3OrC - Heat Transfer")

Passive gas-gap heat switches for use in low-temperature cryogenic systems (in session "C3OrH - Aerospace Sub-Kelvin Cryocoolers")

Performance estimation of an oil-less linear compressor unit for a new compact 2K Gifford-McMahon cryocooler (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Performance improvement in a Stirling cooler with Methane as a condensable component in Helium-Methane mixture as working fluid for refrigeration temperature about 130 K (in session "C3OrA - Stirling Cryocooler Performance and Modeling")

Performance Improvement of a Large Capacity GM Cryocooler (in session "C3OrD - Regenerators and GM Coolers (Non-Aerospace)")

Performance of an ejector for application in a nitrogen JT cycle: experimental and numerical analysis (in session "C1OrA - JT & Reverse Brayton Coolers (Non-Aerospace)")

Performance of high frequency miniature pulse tube cryocooler with different cold fingers (in session "C3PoA - Pulse Tube Cryocoolers (Aerospace)")

Performance of the JT-60SA cryogenic system under pulsed heat loads during acceptance tests (in session "C3OrB - Large Scale Refrigeration and Liquefaction IV")

Performance of Vacuum Epoxy Impregnated 2G-HTS Undulator Magnets (in session "M3OrG - Materials IV: Epoxy")

Performance, Quench, and Protection of a Conduction Cooled, MgB2, MRI Segment Coil (in session "C4OrB - Superconducting Magnet Systems")

Periodic Flow Hydrodynamic Resistance Parameters for Woven Screen Matrices at Cryogenic Temperatures (in session "C3OrD - Regenerators and GM Coolers (Non-Aerospace)")

PIP-II cryogenic system and the evolution of Superfluid Helium Cryogenic Plant specifications (in session "C1PoG - Large Scale Refrigeration and Liquefaction I")

Pneumatic free valve actuators (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Post-Delamination Structural Investigation of REBCO Superconducting Tape (in session "M1PoB - YBCO Coated Conductors I: Processing & Properties")

Prediction of critical current by artificial neural network of nano structured superconducting film (in session "M2PoA - Materials I: Physical Properties")

Preliminary Design of CIADS Cryogenic System (in session "C1PoG - Large Scale Refrigeration and Liquefaction I")

Preliminary Requirements Cryogenic Loads for the electron Ion Collider at BNL (in session "C3PoC - Cryogenic Distribution Systems")

Present Status of Turbo-Brayton Cycle Cooling System in Japan (in session "M2OrC - Focused Symposia - Propulsion VI: Motors & Generators, Cryocool Technologies")

Pressure Drop Based on Two Phase Flow Patterns for Hydrocarbons in Horizontal Smooth Tubes (in session "C3OrK - Hydrocarbons and Mixtures: Fluid Mechanics and Heat Transfer")

Process Simulation for the LCLS-II Cryogenic Systems (in session "C2PoL - Large Scale Simulation")

Production of LNG with an Active Magnetic Regenerative Liquefier (in session "C2PoE - Industrial Applications")

Progress in development of PANDA solenoid magnet. (in session "C1PoF - Superconducting Magnet Systems - Magnet Design")

Progress of Cryogenic Pulsating Heat Pipes at UW-Madison (in session "C3OrC - Heat Transfer")

Promoting BaZrO3 nanorods splay strong and isotropic pinning in BaZrO3-Y2O3 double-doped YBCO thin films (in session "M2PoC - Focused Session: Latest Development in Flux Pinning I: Flux Pinning, Critical Currents")

Properties and recrystallization behavior of copper (in session "M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals")

Pulse tube phase shifter with separating membrane (in session "C3PoA - Pulse Tube Cryocoolers (Aerospace)")

Pyrogenics: applying techniques of cryogenics to high-temperature molten salt (in session "C4OrA - Novel Devices II")

Qualification of a vertical test cryostat for MLI performance tests between 20 to 60 K and 4.5 K (in session "C2PoA - Thermal Insulation Systems I")

Quench Detection and Protection of an HTS Coil (in session "C2PoM - Superconducting Magnet Systems - HTS")

Radiative cooling of the PVLAS Fabry-Perot cavity mirrors (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

Real performance and technical commissioning of an ultra-stable cooling system for a mid-range cryogenic astrophysical instrument (in session "C1PoE - Telescope Systems")

Real-Time Helium Inventory Monitoring of JLab Cryogenic Systems (in session "C3OrF - Large Scale Systems, Facilities and Testing II")

Reassessment of the hydraulic characteristics of the ITER Central Solenoid Model Coil conductors after 15 years of test campaigns (in session "C4OrB - Superconducting Magnet Systems")

REBCO cable AC loss, inter-tape resistance and critical current reduction for mechanical bending (in session "M2OrB - YBCO Coated Conductors II: Processing & Properties")

REBCO Roebel cable stability, current sharing, and quench measurements in a liquid helium bath and applied magnetic fields up to 12 Tesla (in session "M3OrB - Superconductors III: Measurements, Mechanical, Electrical, Stability, AC Loss")

Recent Progress of HTS Application Prototypes in JST/Strategic Innovation Program (in session "C2OrA - Cryogenic Power Cables and Leads II")

Reexamining the heat treatment of RRP® Nb3Sn and the potential for further improvements (in session "M1OrF - Focused Session: Pushing Nb3Sn Conductors Beyond the State of the Art")

Refrigeration assessment of the existing cryogenic plants for the high luminosity upgrade of the Large Hadron Collider (LHC) (in session "C2OrD - Large Scale Refrigeration and Liquefaction III")

Refrigerator and recirculator system supplied by Linde Kryotechnik AG for U.S. ITER central solenoid module fabrication program (in session "C3OrB - Large Scale Refrigeration and Liquefaction IV")

Reinforced, high current density Bi2212 wire for transposed cables and solenoidal coils (in session "M3OrH - BSCCO Wires and Tapes II: Processing & Properties")

Relations between unsteady behaviors and shock waves in cavitating liquid nitrogen flows through a transparent venturi tube (in session "C3OrG - Nitrogen Fluid Mechanics and Heat Transfer")

Relief device sizing for helium and hydrogen applications (in session "C2OrC - Safety")

Remote monitoring system for the cryogenic system of superconducting magnets in the SuperKEKB Interaction Region (in session "C1PoL - Large Scale Controls")

Remote refilling of LN2 cryostat for high sensitivity Astronomical application (in session "C1PoE - Telescope Systems")

Repeatability Measurements of Apparent Thermal Conductivity of Multi-layer Insulation (MLI) (in session "C3OrE - Thermal Insulation Systems II - sponsored by CAD Cut")

Repeatability Testing of Cryogenic Multilayer Insulation (in session "C3OrE - Thermal Insulation Systems II - sponsored by CAD Cut")

Research of the vapor cooled shield in cryogenic liquid storage (in session "C2PoA - Thermal Insulation Systems I")

Research on High TCS project for Gobi Photovoltaic Development (in session "M1PoA - Focused Symposia - Propulsion III: Materials, Technologies, Drivetrain Machines")

Role of Size on the Relative Importance of Fluid Dynamic Losses in Linear Cryocoolers (in session "C3OrA - Stirling Cryocooler Performance and Modeling")

RRP® Nb3Sn Wire Optimization with Bruker-OST (in session "M1OrF - Focused Session: Pushing Nb3Sn Conductors Beyond the State of the Art")

Safety Aspects of Whole-Body Cryochamber and Cryosauna Operation (in session "C1OrC - Medical Systems")

Safety Studies on Vacuum Insulated Liquid Helium Cryostats (in session "C2OrC - Safety")

Serial testing of XFEL cryomodules: results of the cryogenic heat load measurements (in session "C1OrE - Superconducting RF Systems")

Signatures of excitonic and superconducting oscillations: Metal-insulator and insulator-metal transitions in thin carbon films and graphitic samples (in session "M2PoF - Superconductors II: Fundamental, New Materials")

Simulation and experimental research of heat leakage of cryogenic transfer lines (in session "C3PoD - Large Scale Systems, Facilities and Testing I")

Simulation of Diffusion Process of Contamination Gas in Pulse Tube Cryocooler (in session "C2PoC - Aerospace Cryocoolers I")

Simulation on bubble shape and dynamics in liquid oxygen under magnetic field (in session "C2OrF - Helium and Oxygen Fluid Mechanics and Heat Transfer")

Simulation test on the performance of thermodynamic vent system with R123 (in session "C1PoC - Aerospace")

Single Crystal Growth and Doping of Possible Cr analogues to Fe-based Superconductors (in session "M2PoF - Superconductors II: Fundamental, New Materials")

Single-strand excitation for measuring current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla (in session "M2OrB - YBCO Coated Conductors II: Processing & Properties")

SNS Central Helium Liquefier Spare Carbon Bed Installation and Commissioning (in session "C1PoH - Purification Systems")

SNS Cryogenic Test Facility Kinney Vacuum Pump Commissioning and Operation at 2 K (in session "C1PoD - Pumps, Compressors and Expanders")

SNS Proton Power Upgrade (in session "C1OrE - Superconducting RF Systems")

Software development kit for a compact cryo-refrigerator (in session "C3OrD - Regenerators and GM Coolers (Non-Aerospace)")

Specification of the 2nd cryogenic plant for RAON (in session "C3OrB - Large Scale Refrigeration and Liquefaction IV")

Spectral Mass Gauging of Unsettled Liquid with Acoustic Waves (in session "C1PoC - Aerospace")

Status of Cryogenic and Superconducting Components for MW-Class Electric Power Systems (in session "M1PoA - Focused Symposia - Propulsion III: Materials, Technologies, Drivetrain Machines")

Status of Pulse Tube Cryocooler Development at SITP, CAS (in session "C4OrD - Aerospace Cryocoolers II")

Status of Round Robin Test for Tensile Test on REBCO Wires at Cryogenic Temperature (in session "M1PoE - Superconductors I: Measurements, Mechanical, Electrical, Stability, AC Loss")

Status of the ITER Cryodistribution (in session "C3PoD - Large Scale Systems, Facilities and Testing I")

Status of the LBNF Cryogenic System (in session "C3OrJ - Large Scale Systems, Facilities and Testing III")

Status on conceptual design of the CEPC cryogenic system (in session "C3PoC - Cryogenic Distribution Systems")

Strain control of composite superconductors to prevent degradation of superconducting magnets during a quench (in session "C4OrB - Superconducting Magnet Systems")

Strong, high Je Bi2212 round wire (in session "M2PoD - BSCCO Wires and Tapes I: Processing & Properties")

Structure and superconducting characteristics of magnesium diboride; substitution of boron atoms to oxygen and carbon. (in session "M2OrF - MgB2 Wires and Tapes: Processing & Properties")

Structure design and dynamics simulation study of active magnetic bearing for helium centrifugal cold compressor (in session "C1PoD - Pumps, Compressors and Expanders")

Study of dynamic process of a large-scale helium refrigerator (in session "C2PoL - Large Scale Simulation")

Study of metallurgical factors in improving service life of wire drawing carbide dies using cryogenic treatment (in session "M3OrG - Materials IV: Epoxy")

Study of Nitrogen Two-phase Flow Pressure Drop in Horizontal and Vertical Orientation (in session "C3OrG - Nitrogen Fluid Mechanics and Heat Transfer")

Study of reverse Brayton cryocooler with helium-neon mixture for HTS cable (in session "C1OrA - JT & Reverse Brayton Coolers (Non-Aerospace)")

Study of the cascade utilization of compressor waste heat in a cryogenic air separation unit (in session "C3OrJ - Large Scale Systems, Facilities and Testing III")

Study on a 85Hz 10W@80K coaxial pulse tube cryocooler to be used in space (in session "C3PoA - Pulse Tube Cryocoolers (Aerospace)")

Study on a three-stage cascade pulse tube cryocooler (in session "C1OrG - Pulse Tube Components")

Study on Oscillating Heat Transfer in Heater and Cooler of β-type Free-Piston Stirling Engine (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

Study on the adjustment capability of the excitation system located inside superconducting machine electromagnetic shield (in session "M1PoA - Focused Symposia - Propulsion III: Materials, Technologies, Drivetrain Machines")

Study on the flow nonuniformity in a high capacity Stirling pulse tube cryocooler (in session "C1OrG - Pulse Tube Components")

Superconducting Bearings for a LHe Transfer Pump (in session "C1OrB - Expanders II")

Superconducting magnet control system of JT-60SA (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Superconducting Magnet Stability and Wire Insulations (in session "C2PoG - Superconducting Magnet Systems - Experimental Studies")

Superconducting transmission line for power distribution (in session "C2OrA - Cryogenic Power Cables and Leads II")

Suppression of Magnetization and Creep in Bi2212 strands (in session "M3OrA - Focused Session: Latest Development in Flux Pinning II: LTS, Fe-based, Creep in HTS")

System integration for a turn-key gas-separation to liquid in a mobile solution. (in session "C4OrC - Pulse Tube and Thermoacoustic Coolers: Large Scale Applications (Non-Aerospace)")

Temperature dependence on tensile properties of Cu-40mass%Fe dual phase alloy (in session "M2OrG - Materials III: Processing of Metals and Alloys")

Test Results on TRL5 Vibration-free Sorption-based Cooler for 15 – 30 K (in session "C1OrA - JT & Reverse Brayton Coolers (Non-Aerospace)")

Testing and qualifying cryogenic safety valves at cold conditions (in session "C1PoK - Instrumentation, Visualization, and Controls I")

The application of interference fits for overcoming limitations in clamping methodologies for cryo-cooling first crystal configurations in X ray monochromators (in session "C3OrC - Heat Transfer")

The Connection of Refrigeration to a Superconducting Device with the Minimum amount of Cryogen (in session "C1PoM - Superconducting Magnet Systems - Cryogenics")

The construction of the 1.8K high voltage electrical breakdown measuring system with GM cryocooler (in session "M2PoA - Materials I: Physical Properties")

The control system of a 2kW @20K helium refrigerator (in session "C1PoL - Large Scale Controls")

The cryogenic design of the SuperCDMS-SNOLAB experiment (in session "C3OrJ - Large Scale Systems, Facilities and Testing III")

The Cryogenic Moderator System for the European Spallation Source (in session "C1PoJ - Hydrogen Systems")

The Design and Testing of Large Cryogenic Space Radiators for the James Webb Space Telescope (in session "C1OrD - Aerospace: JWST and Propellant Storage")

The design of the new LHC connection cryostats (in session "C1PoM - Superconducting Magnet Systems - Cryogenics")

The development of helium turbo expanders for a 250W helium refrigerator (in session "C1PoD - Pumps, Compressors and Expanders")

The development of high pinning site densities in multifilamentary PIT wires using the internal oxidation route (in session "M1OrF - Focused Session: Pushing Nb3Sn Conductors Beyond the State of the Art")

The Development of Persistent joints for MgB2 Conductors (in session "M2OrF - MgB2 Wires and Tapes: Processing & Properties")

The Dielectric Strength of Cryogenic Gas Mixtures for Various Sections in Shipboard Cryogenic Power Systems (in session "C1OrF - Gas Mixture Properties and Behavior")

The effect of condenser temperature for internal pressure in a closed loop thermosyphon cooling system for HTS motor. (in session "C3PoE - Cryogenics for Superconducting Machines")

The Effect of Geometric Parameters on Multi-stream Parallel Flow Plate-Fin Heat Exchangers’ Effectiveness and Pressure Loss (in session "C2PoJ - Fluid Mechanics, Heat Transfer and Cryogen Properties I")

The effect of the natural convection of supercritical helium on the temperature stability in cryogenic system (in session "C2PoJ - Fluid Mechanics, Heat Transfer and Cryogen Properties I")

The experimental optimization of the linear compressor for space 4K JT cooler (in session "C2PoC - Aerospace Cryocoolers I")

The helium recovery and purification system at the IHEP (The Institute of High Energy Physics of the Chinese Academy of Sciences） (in session "C3PoD - Large Scale Systems, Facilities and Testing I")

The Helium Turbines Design and Testing of 500W@4.5 K Cryogenic System (in session "C1OrB - Expanders II")

The influence of cryorolling conditions on the mechanical properties and microstructure of 316LN austenitic stainless steel (in session "M2OrG - Materials III: Processing of Metals and Alloys")

The influence of pressure ratio on the regenerator performance (in session "C3OrD - Regenerators and GM Coolers (Non-Aerospace)")

The influence of processing methods and test methods on the n value of wire in channel superconductor wire (in session "M1PoD - NbTi/Nb3Sn/A15 Processing & Properties II")

The influence of seal clearance on the performance of stirling cooler (in session "C1PoD - Pumps, Compressors and Expanders")

The Numerical Simulation and Experimental Comparison of Separator Cooling Systme for Helium (in session "C2PoL - Large Scale Simulation")

The Potential Role of Cryogenics in Wiggler and Undulator Magnets (in session "C4OrB - Superconducting Magnet Systems")

The Progress on 2K Cryogenic System for Superconducting Cavity of SSRF II (in session "C2PoH - Large Scale Refrigeration and Liquefaction II")

The Progress on Cryogenic Calorimeter for Superconducting Undulators at SSRF (in session "C1PoF - Superconducting Magnet Systems - Magnet Design")

The Pursuit of Low Cost Access to Space: An Introduction to Blue Origin (in session "Wednesday Plenary (8:15 - 9:00 a.m.) - Ronald Bliesner, Blue Origin")

The scope of additive manufacturing in cryogenics, component design and applications (in session "C4OrA - Novel Devices II")

The study of high RRR value of wire in channel superconductor wire (in session "M1PoC - NbTi/Nb3Sn/A15 Processing & Properties I")

The study on a gas-coupled two-stage Stirling-type tube cryocooler (in session "C3PoA - Pulse Tube Cryocoolers (Aerospace)")

The study on high efficiency and low vibration flexure bearing stirling cooler (in session "C2PoC - Aerospace Cryocoolers I")

The study on the effect of gas contamination in stirling cooler (in session "C2PoC - Aerospace Cryocoolers I")

The Superconducting Dipole of SIS100: Technology Optimization for Series Production (in session "C1PoF - Superconducting Magnet Systems - Magnet Design")

Theoretical analysis and coating thickness determination of a dual layer metal coated FBG sensor for Sensitivity Enhancement At Cryogenic Temperatures (in session "C1PoK - Instrumentation, Visualization, and Controls I")

Theoretical Analysis and Experimental Investigation on a Traveling-Wave Thermoacoustically-Driven Cryocooler for Natural Gas Liquefaction (in session "C4OrC - Pulse Tube and Thermoacoustic Coolers: Large Scale Applications (Non-Aerospace)")

Theoretical and Experimental Studies on a Cryogenic Thermal Storage in Superconducting Cable Terminations to Protect Against Unexpected Heat Loads (in session "C1PoB - Cryogenic Power Cables and Leads I")

Thermal analysis of a prototype cryogenic polarization modulator for use in a space-borne CMB polarization experiment (in session "C1OrD - Aerospace: JWST and Propellant Storage")

Thermal characterization of 50 mK adiabatic demagnetization refrigerator for space (in session "C3OrH - Aerospace Sub-Kelvin Cryocoolers")

Thermal conductance characterization of the SuperCDMS-SNOLAB cryogenic conduction stem components (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

Thermal conductivity of aerogel blanket insulation under cryogenic-vacuum conditions in different gas environments (in session "C3OrE - Thermal Insulation Systems II - sponsored by CAD Cut")

Thermal conductivity studies of epoxy-aluminium composites between 4.5 K to 300 K for the development of cryosorption pumps (in session "C3PoB - Pulsed Heat Pipes and Heat Transfer")

Thermal expansion and magnetostriction measurements at cryogenic temperature using the strain gage method (in session "M2PoA - Materials I: Physical Properties")

Thermal Interface Material Characterization for Cryogenic Electronic Packaging Solutions (in session "C3OrC - Heat Transfer")

Thermal Model of a Quench in Superconducting Undulators (in session "C1PoF - Superconducting Magnet Systems - Magnet Design")

Thermal-Mechanical Analysis on the Refrigerator Cold Box of the CFETR Coil Test Facility (in session "C2PoL - Large Scale Simulation")

Thermal-mechanical properties of epoxy-impregnated Nb3Sn composites for 15 T dipole magnets (in session "M1PoC - NbTi/Nb3Sn/A15 Processing & Properties I")

Thermodynamic analysis and comparison of single-stage mixed-refrigerant Joule–Thomson cycle and reverse Brayton cycle for cooling 80 ~ 120 K temperature-distributed heat loads (in session "C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)")

Thermodynamic analysis and economical evaluation of two 300-80 K precooling stage configurations for helium refrigeration and liquefaction cycle (in session "C2PoL - Large Scale Simulation")

Thermodynamic Analysis on of Skid-Mounted Coal-bed Methane Liquefaction Device using Cryogenic Two-Phase Turbo-Expander (in session "C2PoB - Expanders I")

Thermodynamic characteristics of a novel wind-solar-liquid air energy storage system (in session "C2PoE - Industrial Applications")

Towards isotropic vortex pinning in YBCO films with BHO-Y2O3 and BZO-Y2O3 artificial pining centers (in session "M3OrC - Focused Session: Latest Development in Flux Pinning III: Pinning, Critical Currents & Creep in HTS")

Towards the conceptual design of the cryogenic system of the Future Circular Collider (FCC) (in session "C2OrD - Large Scale Refrigeration and Liquefaction III")

Transient model of carbon dioxide desublimation from nitrogen (in session "C1OrF - Gas Mixture Properties and Behavior")

Transition Edge Sensors for Quench Localization in SRF Cavity Tests (in session "C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.")

Transposed, high current HTS cables made with reinforced, narrow Bi2212 wire (in session "M2OrD - HTS and LTS Cables II")

Trapped field property of iron-pnictide bulk magnet (in session "M1OrB - HTS and MgB2 Bulk I")

Tunable Broadband Radiation Generated Via Ultrafast Laser Illumination of an Inductively Charged Superconducting Ring (in session "M3OrD - Focused Session: Cryogenic Microelectronics & Materials I")

Two-stage high frequency pulse tube refrigerator with base temperature below 10 K (in session "C3PoA - Pulse Tube Cryocoolers (Aerospace)")

Updated Survey of Cryogenic Cooling Technologies for Superconducting Power Systems (in session "M2OrC - Focused Symposia - Propulsion VI: Motors & Generators, Cryocool Technologies")

Upgrade of the cryogenic infrastructure of SM18, CERN main test facility for superconducting magnets and RF cavities (in session "C3OrF - Large Scale Systems, Facilities and Testing II")

Upgrade of the spoke test cavity station - PIP II (in session "C3PoC - Cryogenic Distribution Systems")

Use of ionic liquids in helium applications (in session "C1OrB - Expanders II")

Use of Profibus for cryogenic instrumentation at XFEL (in session "C1PoL - Large Scale Controls")

Vapor Shroud for Liquid Hydrogen Fueling of an Unmanned Aerial Vehicle (UAV) (in session "C1PoC - Aerospace")

Variable Range Hopping conduction in the insulating samples 70Ge: Ga p-type semiconductor at very low temperature (in session "M2PoA - Materials I: Physical Properties")

Visualization of grid-generated turbulence in He II using PTV (in session "C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.")

What Productization of SuperConducting Electronics Requires of the Cyro-cooler Community (in session "Thursday Plenary (7:55 - 8:40 a.m.) - Dr. Deborah Van Vechten, Office of Naval Research")

Y2O3-doped YBCO Thin Films Prepared by Polymer-Assisted Fluorine-Free Metal Organic Deposition (in session "M2PoC - Focused Session: Latest Development in Flux Pinning I: Flux Pinning, Critical Currents")

YBCO pancake coils wound using electrically non insulated tapes: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T (in session "M1PoE - Superconductors I: Measurements, Mechanical, Electrical, Stability, AC Loss")

Zero Boil-Off Control Methods for Large Scale Liquid Hydrogen Tanks using Integrated Refrigeration and Storage (in session "C1OrD - Aerospace: JWST and Propellant Storage")

Choose timezone

CEC-ICMC 2017 - Abstracts, Timetable and Presentations

Support