Conveners
Session 2; 10-nov 2017;
- Krystian Roslon (Warsaw University of Technology (PL))
RACK conatins a great amount of electronic devices so it is obvious that it will warm up during work. To
prevent damage of hardware a productive cooling system should be installed. Currently there is ventilation panel
but an additional control of an air circulation is also necessary. This project had in view to create a mechanism
which allows to lock the ventilation duct. The software was...
The main subject of my research during Summer Student Program 2017 was to analyse how temperature of environment affect temperature inside the MPD-TOF(Multi-Purpose Detector- Time Of Flight detector).
My analysis was based on simulation of few situations where the MPD-TOF detector were located in different environment (I have changed the surrounding air temperature). In my work I used programs...
Temperature measurement system for electronic devices for Slow Control System was software in labview environment in order to efficent integration with the hardware from National Instruments.
Developed program supports Lumel P19 sensors, which can measure not only temperature but also humidity.
In order to keep right condition in RACKs, there were also installed closed air cooling...
A presentation is about the technical details of a simple electronical system that was constructed during Summer Student Program at Joint Institute for Nuclear Research in July 2017. The system allows to measure temperature in many different points simultaneously. It is built with an equipment of the Polish company Lumel and can be used in 'Quinta' experiment.
One of the main purpose of the work was to create magnetic field measurement system which could make a stability tests of the magnetic field in electromagnets. When system has been already created, the stability test of the main magnet (directing magnet) was made. Next step of the work was to create another magnetic field measurement system which could make measurements of the Earth's magnetic...
Firstly,importance of ground quality measurements in JINR is discussed. Than, it takes few words about NI CompactRIO controller and its features. Finally, model of ground quality measurements,which was designed using the above-mentioned controller, is described.
First of all, launching and configuring a CompactRIO controller and finding out how to use it. The controller supports many different modules, so it is a great capability to control and measure some electronic systems. The next thing is making those modules useful and to program them. These modules are: analog input and output, digital input and output and GPS time synchronization. GPS module...
SlowControl system is designed for controlling and acquiring data from detectors
used in the MPD-NICA experiments. It consists of various smaller sub-systems,
which are build from electronic components. This compilation of three sub-
system and seven electronic devices shows the audience a part of the developing
SlowControl system.
The aim of the talk is to present the...
Throughout mu presentation I will show the posiiblities which C-RIO cassette gives in Slow Control system, based on am example of RACK cooling system. I will present the basics of RACK cooling system and how it can be deployed using Compact RIO embedded system based on Compact RIO cassette and specialized Comapct RIO modules, NI9871 [RS-485 serial communication] and NI9375 [digital I/O].
Temperature measurements are an essential part of the Slow Control System. Using temperature sensors, one can monitor the operation of electronics within the system and monitor possible faults. In order to work properly, those sensors need to be scattered around the whole system, and data acquisition system must be able to handle all of them.
The simplest solution is to assign every single...
The NICA (Nuclotron-based Ion Colider fAcility) beam pipeline room will be adjacent to a chamber with its Slow Control electronic equipment. It is possible to appear a radiation exposure in that chamber in case of a leakage from the pipeline or any other reasons. It can destroy the control electronics when the radiation is strong enough, effecting in potential abnormality of the NICA devices...