Conveners
Session 3; 10-nov 2017;
- Krystian Roslon (Warsaw University of Technology (PL))
The aim of the "High energy neutron flux density measurements in ADS systems" project was the research about neutron flux in the experimental assembly based on natural uranium and proton beam from accelerator (’Quinta’ experiment in june 2017) to gain he better knowledge about neutron flux density, which could be useful to constructing the fourth generation and accelerator-driven subcritical...
"The aim of the project was the research about neutron flux in the experimental assembly based on natural uranium and proton beam from accelerator („Quinta” experiment, 2015). To gain the knowledge about the neutron flux, a threshold reaction was used. The better knowledge about neutron flux density could be useful to constructing the fourth generation and accelerator-driven subcritical...
Estimation of uncertainties is very important part of measurements. Without them we have problems with comparison of results. We also don't know anything about the confidence of our measurements.
In this presentation I would like to briefly introduce into basic rules used to get uncertainty. I will present most important methods used to estimate uncertainty with some simple examples.
Presentation cover topic connected with gas system control for Time of Flight detector. General attitude to control systems with description of flow gas through detector and presentation of mathematical model based on transfer function with futher implementation of DMC regulator.
For proper operation the particle accelerators based on superconductive magnets require a precise temperature monitoring. In this presentation properties of the carbon based resistance temperature detectors (RTD) will be presented, including their behavior in the high magnetic field, which is a crucial parameter for their application in the accelerator monitoring systems.
The calibration...
Thanks to superconducting technology, even in small laboratories, there is possibility of using strong magnetic fields. Electromagnets made of HTS tape second generation give ability to work in temperature of liquid nitrogen. Technology of their construction however is complex. The most common constructing method is to join parts of HTS electromagnet by resistive components. Losses of energy...
This work describes the built measurement system for the study of the sulfide-lead photoresistor (PbS), built detector and measurement results. In this thesis, the stages of comparison of the pre-amplification stages, the dynamics analysis of the applied system, the design and construction of the measuring system and the analysis of the received data were presented.
Radon gas is main source of ionizing radiation in air. Due to this fact, science club CAMAC is working on measurements, processing and visualization of this gas concentration. Part of this research is preparing a system with data acquisition software and a website with interactive map.
CAMAC Science Club, a short form of the name, was adopted by Computer Automated Measurement And Control, a standard of electronic modular apparatus.
CAMAC Science Club, was founded in 1984, on the initiative of students from the Institute of Physics of the Warsaw University of Technology.
Members are students, from different faculties. Open formula CAMAC Science Club, allows to carry out...