Login

CEC-ICMC 2019 - Abstracts, Timetable and Presentations

21–25 Jul 2019
Connecticut Convention Center, Level 6
US/Eastern timezone

Conference Management

Session

M1Or2B - Focus Series A: REBCO Coated Conductors II

M1Or2B
22 Jul 2019, 11:00
Level 6, Room 14

Level 6, Room 14

Conveners

M1Or2B - Focus Series A: REBCO Coated Conductors II

  • Carlo Ferdeghini (CNR-SPIN)
  • Vyacheslav Solovyov (Brookhaven Technology Group)

Presentation materials

There are no materials yet.

  1. 1116. M1Or2B-01 [Invited]: Status of second-generation HTS wire production at THEVA
    Markus Bauer (THEVA Dünnschichttechnik GmbH)
    22/07/2019, 11:00
    Invited Oral Presentation

    THEVA developed an all PVD approach for the production of GdBCO based high temperature superconducting wires for a variety of applications. Using our pilot production line in Germany, we can manufacture the wires in long lengths with a critical current of 500 A/cm (77 K, 0 T) and more.

    In order to increase the current density for magnet applications, we recently developed a new type of HTS...

    Go to contribution page
  2. 1112. M1Or2B-02 [Invited]: Present status of RE-123 superconducting wire development at Shanghai Superconductor Technology
    Prof. Yutaka Yamada (Shanghai Superconductor Technology Co. Ltd.,)
    22/07/2019, 11:30
    Invited Oral Presentation

    I will introduce the activity of RE-123 Coated Conductor (CC) at Shanghai Superconductor Technology Co. Ltd (SSTC). Recently we have many HTS projects in China including accelerator, high-field magnet, electric power applications and so on. For these projects, we have been supplying a large amount of RE-123 CC stably. The CC fabrication process is PLD-IBAD method and the Ic (77K, 0T) is around...

    Go to contribution page
  3. 1087. M1Or2B-03 [Invited]: Enhancement of Measurement Speed over 100 m/h in Reel-to-Reel Scanning Hall Probe Microscopy Using a Multi-Channel Array
    Takanobu Kiss (Kyushu University)
    22/07/2019, 12:00
    Invited Oral Presentation

    In our previous study, we demonstrated that the reel-to-reel scanning Hall probe microscopy (RTR-SHPM) has a good advantage on the measurements of spatially resolved in-plane Jc distribution in a long length HTS tapes with a high spatial resolution along the tape width as well as the longitudinal direction. This is inevitable for a detection of localized defect in the tape, evaluation of an...

    Go to contribution page
Building timetable...