Name: TWEPP 2013 - Topical Workshop on Electronics for Particle Physics
Start: 2013-09-23T10:00:00+02:00
End: 2013-09-27T18:00:00+02:00
Location: Perugia, IT

3D Integration, from tool box to applications (in session "Plenary 7")

10 Order of OF Magnitude Current Measurement Digitizers for the CERN Beam Loss Systems. (in session "Poster")

10Gbps TCP/IP streams from the FPGA for the CMS DAQ Eventbuilder Network (in session "Programmable logic, design tools and methods")

A 20 mW, 4.8 Gbit/sec, SEU robust serializer in 65nm for read-out of data from LHC experiments (in session "ASICs")

A 65-nm-CMOS-process-based 10-Gbps VCSEL driver (in session "Optoelectronics and Links")

A DC-DC Conversion Powering Scheme for the CMS Phase-1 Pixel Upgrade (in session "Poster")

A Fast UV-LED QRdriver for Calibration System for SiPM Based Scintillator HCAL Detector (in session "Poster")

A Full Mesh ATCA-based General Purpose Data Processing Board (in session "Poster")

A GLIB-based uTCA demonstration system for HEP experiments (in session "Systems, Planning, Installation, Commissioning and Running Experience")

A multichannel Time-to-Digital Converter ASIC with better than 3 ps-rms time resolution (in session "ASICs")

A new approach to interfacing on-detector electronics (in session "Poster")

A New High-Speed Optical Transceiver For Data Transmission at the LHC Experiments (in session "Poster")

A new Rad-Hard DC/DC buck converter ASIC for LHC experiment upgrades (in session "Power, Grounding and Shielding")

A prototype hybrid pixel detector ASIC for the CLIC experiment (in session "ASICs")

A Real-time Histogramming Unit for Luminosity and Beam Background Measurements for each Bunch Crossing at the CMS Experiment (in session "Programmable logic, design tools and methods")

A reliability test system for production grade DC-DC modules (in session "Power Working Group")

A Small-Footprint, Dual-Channel Optical Transmitter for the High-Luminosity LHC (HL-LHC) Experiments (in session "Poster")

Acquisition and control command system for power pulsed detectors (in session "Poster")

An optical data transmission ASIC for the ATLAS liquid argon calorimeter upgrade (in session "Optoelectronics and Links")

An Ultra-Fast Data Acquisition System for Coherent Synchrotron Radiation with YBCO Terahertz Detectors (in session "Poster")

APEnet+ 34 Gbps Data Transmission System and Custom Transmission Logic. (in session "Programmable logic, design tools and methods")

ATCA developments for the ATLAS Tile Calorimeter upgrade (in session "xTCA Working Group")

ATLAS Diamond Beam Monitor (in session "Poster")

Biologically-Inspired Massively-Parallel Computation (in session "Plenary 6")

Carbon nanotubes and graphene nanoribbons for future IC interconnect technology (in session "Opening 2")

Characterization of COTS ADC radiation properties for ATLAS LAr calorimeter readout upgrade (in session "Radiation Tolerant Components and Systems")

Characterization of the CBC2 readout ASIC for the CMS strip-tracker high-luminosity upgrade (in session "ASICs")

Characterization results and first applications of KLauS - an ASIC for SiPM charge and fast discrimination readout (in session "Poster")

Chips developed at CERN in the framework of the Medipix3 Collaboration (in session "Plenary 5")

Common control and readout board for the Calorimeter and Tracker Front-end electronics of the SuperNEMO experiment. (in session "Poster")

Common Read-Out Receiver Card for the ALICE Run2 Upgrade (in session "Poster")

Consolidation of the radiation tolerant programmable power supply cards for the LHC beam screen heaters (in session "Poster")

Continuous-Time Analog Filter Design in CMOS Nanoscale Era (in session "Plenary 3")

DEPFET active pixel sensors for the vertex detector of the Belle-II experiment (in session "Poster")

Design and characterization of a GAPD pixel detector prototype for future particle trackers (in session "Poster")

Design and Performance of the VMM1 ASIC for Micropattern Gas Detectors (in session "ASICs")

Design of a deterministic link initialization mechanism for serial LVDS interconnects (in session "Poster")

Design of a Hardware Track Finder (Fast Tracker) for the ATLAS Trigger (in session "Trigger")

Design of an FPGA-based embedded system for the ATLAS Tile Calorimeter front-end electronics test-bench (in session "Poster")

Design of the analog front-end for the Timepix3 and Smallpix hybrid pixel detectors in 130nm CMOS technology (in session "ASICs")

Development and Testing of an Upgrade to the CMS Level-1 Calorimeter Trigger (in session "Trigger")

Development of a digital trigger system to identify recoil protons at COMPASS-II (in session "Poster")

Development of CMOS Pixel Sensor with digital pixel dedicated to future particle physics experiments (in session "Poster")

Development of Dedicated Front--end Electronics for Straw Tube Tracker in PANDA Experiment (in session "ASICs")

Development of New Front-end Electronics for the Upgrade of the ATLAS Muon Drift Tube Chambers at High LHC Luminosity (in session "Poster")

Development of Precision Time-Of-Flight Electronics for LHCb TORCH (in session "Poster")

Development of the readout system for Triple-GEM detectors for the CMS forward muon upgrade (in session "Poster")

Development of variable frequency, power Phase-Locked Loop (PLL) in 130nm CMOS technology (in session "Poster")

Development of variable sampling rate, low power 10-bit SAR ADC in 130 nm IBM technology (in session "ASICs")

Developments on DC/DC converters for the LHC experiment upgrades (in session "Poster")

Digital Column Readout Architectures for Hybrid Pixel Detector Readout Chips (in session "Poster")

Discussion (in session "Power Working Group")

DTCC, a Point-to-Point Link for Data, Trigger, Clock and Control over Copper or Fiber (in session "Poster")

Electronics for Particle Physics in Perugia (in session "Opening 1")

Evaluation of 400m, 5Gbit Versatile Link lengths over OM3 and OM4 fibres for the LHCb upgrade (in session "Poster")

Evaluation results from AC/DC converters for xTCA (in session "xTCA Working Group")

Evaluation results of xTCA equipment for HEP experiments at CERN (in session "Systems, Planning, Installation, Commissioning and Running Experience")

FEERIC, a very-front-end ASIC for the ALICE Muon Trigger Resistive Plate Chambers (in session "Poster")

FPGA-based, radiation-tolerant on-detector electronics for the upgrade of the LHCb Outer Tracker Detector (in session "Poster")

Front end strategy for the daq system of a Kinetic inductance detector (in session "Poster")

Gamma Irradiation of Minimal Latency Hollow-Core Photonic Bandgap Fibres (in session "Optoelectronics and Links")

GBT Project Status (in session "Optoelectronics Working Group")

Hardware, firmware and software developments for the upgrade of the ATLAS Level-1 Central Trigger Processor (in session "Trigger")

High speed readout electronics development for frequency-multiplexed kinetic inductance detector design optimization (in session "Systems, Planning, Installation, Commissioning and Running Experience")

How to create successful open hardware projects - about White Rabbits and open fields (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Hybrid circuit prototypes for the CMS Tracker upgrade front-end electronics (in session "TOPICAL (Packaging & High Density Hybrids)")

Integration Design Issues in HEP Experiments (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Irradiation Tests and Expected Performance of Readout Electronics of the ATLAS Hadronic Endcap Calorimeter for the HL-LHC (in session "Radiation Tolerant Components and Systems")

LOC Project Status (in session "Optoelectronics Working Group")

LogAmp electronics and optical transmission for the new SPS beam position measurement system. (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Longevity of CMS ECAL Electronics (in session "Poster")

Messages from our friends (in session "xTCA Working Group")

Metrics and Methods for TTC-PON System Characterization (in session "Poster")

Microelectronics User Group Summary (in session "WG Summaries")

Microfabricated silicon on-detector cooling systems (in session "TOPICAL (Packaging & High Density Hybrids)")

Mismatch in deep-submicron and the consequences for analog designs (in session "Plenary 2")

MISTRAL & ASTRAL: Two CMOS Pixel Sensor Architectures dedicated to the Inner Tracking System of the ALICE Experiment (in session "ASICs")

Mitigation of Radiation and EMI effects on the Vacuum Control System of LHC (in session "Poster")

Monolithic Active Pixel Sensor Development for the Upgrade of the ALICE Inner Tracking System (in session "ASICs")

NaNet: a flexible and configurable low-latency NIC for real-time trigger systems based on GPUs. (in session "Poster")

Neutron Irradiation of Optoelectronic Components for HL-LHC Data Transmission Links (in session "Poster")

News on foundry access services via CERN (in session "Microelectronics User Group")

Next generation Associative Memory devices for the FTK tracking processor of the ATLAS experiment (in session "ASICs")

Open discussions (in session "Microelectronics User Group")

Optical Fibre at HL-LHC (in session "Poster")

Optoelectronics Working Group Summary (in session "WG Summaries")

Performance evaluation of multiple (16 channels) sub-nanosecond TDC implemented in low-cost FPGA (in session "Poster")

Performance of capacitively coupled active pixel sensors in 180 nm HV CMOS technology after irradiation to HL-LHC fluences (in session "Radiation Tolerant Components and Systems")

Performance of the ALICE PHOS trigger and improvements for RUN 2 (in session "Trigger")

PETA4 - A Multi Channel TDC/ADC ASIC for SiPM Readout (in session "ASICs")

Petiroc and Citiroc : Front-end ASICs for SiPM read-out and ToF applications (in session "ASICs")

Phase-I Upgrade of the Trigger Readout Electronics of the ATLAS Liquid-Argon Calorimeters and the Expected System Performance (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Pixel chip architecture optimization based on a simplified statistical and analytical model (in session "Poster")

Pixel front-end development in 65 nm CMOS technology (in session "ASICs")

Power pulsing schemes for analog and digital electronics of the vertex detectors at CLIC (in session "Power, Grounding and Shielding")

Power Working Group Summary (in session "WG Summaries")

Powering large FPGAs - ALTERA (in session "Power Working Group")

Powering large FPGAs - XILINX (in session "Power Working Group")

Prototype pixel detector in the SOI technology (in session "Poster")

Pulsed power distribution for power supply isolation and remote 2-wire point-of-load regulation for the ATLAS Pixel Detector (in session "Poster")

QIE10: A New Front-End Custom Integrated Circuit (in session "ASICs")

Quality Assurance and Functionality Tests on Electrical Components during the ATLAS IBL Production (in session "Poster")

Radiation hard programmable delay line for LHCb Calorimeter Upgrade (in session "Poster")

Radiation tolerance tests of SRAM-based FPGAs for the possible usage in the readout electronics for the LHCb experiment. (in session "Poster")

Radiation-Hardened-By-Design Clocking Circuits in 0.13μm CMOS Technology (in session "Poster")

Real-time Topology Processing in the ATLAS Level-1 Calorimeter Trigger (in session "Trigger")

ROC chips for imaging calorimetry at the International Linear Collider (in session "ASICs")

SALT - new silicon strip readout chip for the LHCb Upgrade (in session "Poster")

SamPic0: a 16-channel, 10-GSPS TWDC digitizer chip for picosecond time tagging (in session "ASICs")

Si-photonics at ANL (in session "Optoelectronics Working Group")

Si-photonics at CERN (in session "Optoelectronics Working Group")

Simulation of ATLAS SCT module response to LHC beam loss scenarios (in session "Poster")

Simulation of the ATLAS sTGC trigger for the Phase-I new small wheel detector upgrade (in session "Poster")

Single Event Upset Studies Using the ATLAS SCT (in session "Optoelectronics and Links")

Single event upsets in the readout control FPGA of the ALICE TPC detector during the first LHC running period (in session "Poster")

Single-event upset tests on the readout electronics for the pixel detectors of the PANDA experiment. (in session "Poster")

SlinkXpress (in session "xTCA Working Group")

Soft Error Rate Estimations of the Kintex-7 FPGA within the ATAS Liquid Argon Calorimeter (in session "Programmable logic, design tools and methods")

SPADIC - Self-triggered charge pulse processing ASIC for CBM-TRD (in session "ASICs")

Status of CMOS 65nm technology access, distribution and IP blocks development (in session "Microelectronics User Group")

STiC - A Mixed Mode Silicon-Photomultiplier Readout ASIC for Time-of-Flight Applications (in session "Poster")

Summary of evaluation results of xTCA equipment (in session "xTCA Working Group")

System Level and Production Tests of the CMS HCAL QIE10 (in session "Poster")

System-level Testing of the Versatile Link Components (in session "Optoelectronics and Links")

Technology trends for customized analogue and digital circuit manufacturing including radiation hardness requirements (in session "Opening 1")

Test Results of the first 3D-IC Prototype Chip Developed in the Framework of HL-SLHC/ATLAS Hybrid Pixel Upgrade (in session "Poster")

The 120Gbps VCSEL array based optical transmitter (ATx) development for the High-Luminosity LHC (HL-LHC) experiments (in session "Poster")

The Alice CTP upgrade (in session "Trigger")

The AMC13XG: A New Generation Clock/Timing/DAQ Module for CMS MicroTCA (in session "Poster")

The Charge Pump PLL Clock Generator Designed for the 1.56 ns Bin Size Time-to-Digital Converter Pixel Array of Timepix3 Readout Chip (in session "Poster")

The CLARO-SiGe, a front-end ASIC for precise timing measurements at low power (in session "Poster")

The CMS Global Muon Trigger upgrade (in session "Poster")

The CMS MTF7 Trigger Board (in session "Trigger")

The Design of the Alphasat Payload Processor - Advancing Space Electronics! (in session "Plenary 1")

The eCDR, a Radiation-Hard 40/80/160/320 Mbit/s CDR with internal VCO frequency calibration and 195 ps programmable phase resolution in 130 nm CMOS (in session "Poster")

The First Long Shutdown (LS1) and future upgrades of the LHC machine (in session "Opening 2")

The FPGA based Trigger and Data Acquisition system for the CERN NA62 experiment (in session "Trigger")

The Front-End Hybrid for the ATLAS HL-LHC Silicon Strip Tracker (in session "TOPICAL (Packaging & High Density Hybrids)")

The high voltage power supplies of the CREAM experiement (in session "Poster")

The LHCb Muon Upgrade (in session "Poster")

The management of large cabling campaigns during the Long Shutdown 1 of LHC. (in session "Poster")

The new NA62 LKr readout: first tests and future perspectives (in session "Poster")

The optical link system in the Upgrade project of the Drift Tubes electronics in CMS (in session "Poster")

The proposed trigger-less TBit/s readout for the Mu3e experiment (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The RCU2 - A Proposed Readout Electronics Consolidation for the ALICE TPC in Run 2 (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The Read-Out Driver (ROD) card for the ATLAS experiment: commissioning for the IBL detector and upgrade studies for the Pixel Layers 1 and 2 (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The readout electronic of EUSO-Balloon experiment (in session "Poster")

The sROD Module for the ATLAS Tile Calorimeter Phase-2 Upgrade Demonstrator (in session "Poster")

The upgrade of the LHCb calorimeter (in session "Poster")

TRB3 264 Channel High Precision TDC Platform and Its Applications (in session "Poster")

Trigger-less readout architecture for the upgrade of the LHCb experiment at CERN (in session "Systems, Planning, Installation, Commissioning and Running Experience")

TWEPP Opening (in session "Welcome")

Ultra-thin packaging technologies for CMOS pixel sensors: embedding in kapton foils (in session "TOPICAL (Packaging & High Density Hybrids)")

Update on the AMC13 project in CMS (in session "xTCA Working Group")

Update on the ATCA/AMC readout cards for LHCb (in session "xTCA Working Group")

Upgrade of the Muon Sorter in the Cathode Strip Chamber Level 1 Trigger System at CMS (in session "Poster")

Upgraded Readout and Digitizing System for the ATLAS Tile Calorimeter Demonstrator (in session "Systems, Planning, Installation, Commissioning and Running Experience")

US-CDRD Opto Project Status (in session "Optoelectronics Working Group")

Use of FPGA Embedded Processors for Fast Cluster Reconstruction in the NA62 Liquid Krypton Electromagnetic Calorimeter (in session "Poster")

Versatile Transceiver and Transmitter Production Status (in session "Poster")

VIPRAM – 2D Prototype and 3D Design (in session "Poster")

VTRx Project Status (in session "Optoelectronics Working Group")

Welcome from Director of INFN Perugia and Director of Department of Physics (in session "Welcome")

Welcome from the Local Organizing Committee (in session "Welcome")

What does it take to engineer and mass-produce a reliable parallel optics module… Or is it good enough to just have a good VCSEL and PIN array? (in session "Plenary 4")

xTCA (in session "WG Summaries")

TWEPP 2013 - Topical Workshop on Electronics for Particle Physics

Support

Material Package

Choose timezone

TWEPP 2013 - Topical Workshop on Electronics for Particle Physics

Support