CERN
Author in the following contributions
- Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Quench Location in the LARP MQXFS1 prototype
- Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Parametric Study of Block-coil Dipoles Using Graded Conductors
- Assembly of the Nb3Sn dipole magnet FRESCA2
- Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Status of the 16 T dipole development programme for a future hadron collider
- Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
