Advanced Low Emittance Rings Technology (ALERT) 2016 Workshop
Trieste, Italy
Trieste | 14-16 September 2016
A workshop on Advanced Low Emittance Rings Technology (ALERT 2016) is organized by ELETTRA on the 14th and 16th of September 2016, as a series of the Low Emittance Rings (LOWεRING) Workshops, supported by the EUCARD2 project.
This will be the 2nd workshop on Low Emittance Rings technology after the one organized in the 2014 in Valencia.
The state of the art in the design of accelerator systems in light source storage rings has today many challenges and issues in common with those of linear collider damping rings and future e+/e- circular collider projects. A series of workshops were made since 2010 aiming at strengthening the collaborations within the low emittance rings' community, including the LOWεRING collaboration network and the USR workshops community.
The goal of the ALERT2016 workshop is to bring together scientists but also industrial partners who are designing and building hardware for low emittance rings, with an emphasis on studies and experimental programs in existing rings and facilities. The impact of targeting and reaching ultra-low emittances to the design of technical systems will be addressed, including operational issues, manufacturing tolerances, calibration and stability/repeatability problems, in an environment dominated by synchrotron radiation.
With MAX IV in commissioning and ESRF II and Sirius in construction, this workshop will benefit from the technological solutions already tested at these labs and important lessons could be learned.
Workshop sessions will include:
- Insertion devices (including also superconducting devices)
- Magnets and alignment
- Injection systems (kickers, multipoles etc)
- RF systems, choices and design
- Vacuum systems and vacuum chambers
- Feedback systems
- Instrumentation
Proposals for contributions to the workshop should be addressed to one of the Scientific Committee members
EuCARD-2 is co-funded by the partners and the European Commission under Capacities 7th Framework Programme, Grant Agreement 312453
-
-
1
Welcome¶
From the President and CEO of Elettra - Sincrotrone Trieste
Speaker: Prof. Alfonso Franciosi (Elettra) -
Magnets & alignment¶
Chair: P. Kuske (HZB)
-
14
Dipoles with longitudinally variable field for CLIC damping rings¶Speaker: Manuel Dominguez (CIEMAT)
-
15
NbTi wiggler tests at ANKA¶Speaker: Axel Bernhard (ANKA)
-
16
Vibrating wire method and hall probe measurements for combined function magnets (DQ) alignment¶Speaker: Dr Alexander Temnykh (Cornell)
-
17
Discussion¶
-
14
-
-
Beam transfer systems¶
Chair: R. Bartolini (JAI - DIAMOND)
-
18
Production of round beams¶Speaker: Dr Peter Kuske (HZB - BESSY)
-
19
Development of Multipole Injection Kicker for SOLEIL and MAX IV¶Speaker: Mr Pierre Lebasque (Soleil)
-
20
Stripline kicker development at ALS¶Speaker: Dr Cristoph Steier (LBL)
-
21
Transient studies of the stripline kicker for beam extraction from the CLIC damping rings¶Speaker: Dr Carolina Belver Aguilar (CERN)
-
22
Inductive adders ultra-stable kicker pulse generation¶Speaker: Janne Holma (CERN)
-
18
-
-
Diagnostics, Instrumentation and coating¶
Chair: Å. Andersson (MAX IV)
-
32
Ultra-low vertical emittance measurements in the Australian Light Source¶Speaker: Prof. Mark Boland (Australian Synchrotron)
-
33
Conceptual design of X-ray interferometer for extremely apparent small beam size in FCC-ee and beam halo measurement with coronagraph for HL LHC¶Speaker: Prof. Toshiyuki Mitsuhash (KEK)
-
34
Ultra-short bunch length diagnostics¶Speaker: Axel Bernhard (KIT-ANKA)
- 35
-
36
Experience with coating of low gap chambers¶Speaker: Roberto Kersevan (CERN)
-
37
Discussion¶
-
32
-
Vaccuum and other Key technologies and engineering¶
Chair: A. Bernhard (KIT-ANKA)
-
38
MAX IV 3 GeV ring vacuum system¶Speaker: Mr Marek Grabski (MAX IV)
-
39
Vacuum systems for DDBA and lessons learned for Diamond-II¶Speaker: Dr Matthew Cox (Diamond)
-
40
Experience and future trends of Harmonic RF systems¶Speaker: Dr John Byrd (LBL)
-
41
Transverse and horizontal beam size diagnostics with visible SR¶Speaker: Dr Åke Andersson (MAX IV)
-
42
Particle Accelerator Components’ Metrology and Alignment to the Nanometre scale (PACMAN)¶Speaker: Michele Modena (CERN)
-
43
Discussion¶
-
38
-
Collaboration with industry¶
Chair: R. Geometrante (Kyma)
-
44
SAES group activity in accelerator technology¶Speaker: Mr Paolo Manini (SAES Getters SpA)
-
45
Strumenti scientifici CINEL: a reliable supplier for products as well as a skillful partner for R&D projects¶Speaker: Dr Riccardo Signorato (CINEL)
-
46
SiC MOSFET & Diode Roadmap¶Speaker: Mr Wolfgang Knitterscheidt (eurocomp)
-
47
Superconducting undulators¶Speaker: Cristian Boffo (Babcock Noell GmbH)
-
48
KYMA: a success story of technology transfer and strategic partnerships¶Speaker: Dr Geometrante Raffaella (KYMA)
- 49
-
44