-
Chao Yang (Sichuan University)16/11/2021, 13:15Poster
The linear-motor type high temperature superconducting (HTS) flux pump is a wireless charger which can pump DC current into the second-generation (2G) HTS tapes without the physical contact. In addition ,the flux pump has the smaller volume than the traditional power supply for the same output current. So it is very convenient to charge HTS tapes by utilizing the flux pump which has a compact...
Go to contribution page -
Dachuan Chen (Shanghai Jiao Tong University)16/11/2021, 13:15Poster
The flux pumping devices attract a lot of attention for the excitation of superconducting magnets or the compensation of the field decay. A carefully designed linear flux pump is presented in this work, the dimension of which is smaller than a 5 cm cube. The key part of the device is the magnetic circuit which guarantees the optimized flux pumping performance in terms of operation current,...
Go to contribution page -
Adil Shah (University of Cambridge)16/11/2021, 13:15Poster
High temperature superconducting (HTS) magnets have many potential applications, for instance, NMR/MRI, levitation systems, and high field applications. HTS magnets require a constant external current source to operate in CC mode. Flux pumps provide an alternative contact-less charging source that can inject flux into a closed-loop superconducting circuit. The simplicity of the rotating type...
Go to contribution page -
Zhenxuan Yang (Sichuan University)16/11/2021, 13:15Poster
Superconducting materials have a high current-carrying capacity and direct current(DC) lossless characteristics. The linear-motor type flux pump is a wireless DC power source for high-temperature superconducting coils.In the control process of outputting DC current to the superconductor coil.Except for an uncontrollable parameter λ,which length is depended on the length of the teeth and slots...
Go to contribution page -
Jun Ma (Hunan University)16/11/2021, 13:15Poster
The flux pump technology is bale to output ultra high current for the High temperature superconducting (HTS) magnets without the copper current leads. This can make the HTS magnets system more compact and save more energy. Currently, the flux pump technology is moving forwards to high current level up to 1-2 kA. But there are still mane components to be optimized and studied, and the HTS...
Go to contribution page -
Yujia Zhai (Hunan University)16/11/2021, 13:15Poster
This paper studies the principle of direct current and DC bias voltage induced by superconducting tape in a linear magnetic flux pump system. The external magnetic field is a comprehensive magnetic field composed of a bias magnetic field and a traveling wave magnetic field. An experimental platform for linear magnetic flux pumps was built. Using a combination of simulation and experiment, the...
Go to contribution page -
Mr Jiafu Wei (Sichuan University)16/11/2021, 13:15Poster
In this article, we proposed a method of using multiple linear flux pumps to charge an HTS magnet and set up an experimental system. The system mainly includes three linear-motor flux pumps and five HTS double pancake coils, of which the five coils form an HTS magnet. Each linear-motor flux pump adopts an independent inverter and a DC power supply for cluster control. In order to obtain the...
Go to contribution page -
Ismail Patel (Cambridge University)16/11/2021, 13:15Poster
High Temperature Superconductor (HTS) are one of the most promising applications of HTSs as they offer a means of charging magnetic loads without the need for physical current leads. Flux pumps have been generally built using Low Temperature Superconductors (LTSs), although their implementation using HTSs has been the subject of recent research interest owing to their lower cryogenic...
Go to contribution page -
Mr Muhammad Iftikhar (University of Strathclyde United Kingdom)16/11/2021, 13:15Poster
The superconducting electrical machines are going to be widely used in many modern transport applications in near future. In fact, their great features such as high efficiency, high torque density, high power density, and lighter weight make them an excellent fit for electric aircraft and marine applications. The fully superconducting machines built with superconducting magnets requires a...
Go to contribution page -
Lucas Brouwer (Lawrence Berkeley National Laboratory)16/11/2021, 13:15Poster
We explore methods for stabilization and control of persistent currents in high-temperature superconducting Bi-2223 coils. Several different techniques are considered, including flux transfer through inductive coupling as well as other novel approaches. These different methods are tested at 77 K using an experimental setup with a closed loop of Bi-2223 conductor powering two iron-dominated...
Go to contribution page -
Chenling Xiong (Sichuan University)16/11/2021, 13:15Poster
HTS flux pumps enable superconducting currents to be directly injected into a magnet coil without the requirement for thermally inefficient current leads. As exciter of high temperature superconducting synchronous motor, HTS flux pumps will reduce the cryogenic volume and improve the efficiency of the HTS machine. With the air gap between the flux pump and the HTS stator increases, the...
Go to contribution page
Choose timezone
Your profile timezone: