MT27, 27th International Conference on Magnet Technology

Name: MT27, 27th International Conference on Magnet Technology
Start: 2021-11-15T07:00:00+09:00
End: 2021-11-19T20:00:00+09:00
Location: Fukuoka Convention Center

15–19 Nov 2021

Fukuoka Convention Center

Asia/Tokyo timezone

Speaker List

석원 정 (Seoul National University)
- Speaker at Comparative Design Study of HTS Synchronous Motor with Inner and Outer Rotor Type Based on Multi-Objective Optimization
Mahmoud ABDEL HAFIZ (CEA)
- Speaker at Dimensional Changes Measurement of Nb3Sn Cables and Strands during Heat Treatment Using Digital Image Correlation
Mitsushi Abe (KEK)
- Speaker at Design method of active shield coils of steering magnet for fine tuning of muon injection orbit in muon storage magnet of g-2/EDM precision measurement
Toru ABE (Tohoku university)
- Speaker at Electromagnetic characteristics of two-tape co-winding REBCO coil including local defects
Mark Ainslie (University of Cambridge)
- Speaker at [Invited] Portable, desktop high-field magnet systems using bulk high-temperature superconductors
Arooj Akbar (EPFL)
- Speaker at Optical fiber based quench detection in HTS applications using feature extraction on response signal
Saki Amano (Toshiba Energy Systems & Solutions Corporation)
- Speaker at Thermal design and test results of the superconducting magnet for a compact heavy-ion synchrotron
Giorgio Ambrosio (Fermilab)
- Speaker at [Invited] Analysis of the production of MQXFA Low Beta Quadrupoles for HL-LHC at 50% coil fabrication
Naoyuki Amemiya (Kyoto University)
- Speaker at Current-sharing between filaments and voltage-current characteristics of copper-plated multifilament coated conductors
- Speaker at Low-AC-loss SCSC cable: magnetization loss measurements of spiral copper-plated multifilament coated conductors
Soobin An (Seoul National University)
- Speaker at Adaptive Element Equivalent Circuit of No-Insulation High Temperature Superconductor Coil Containing Multiple Defects
Diadechko Anastasiia (National Research Nuclear University MEPhI)
- Speaker at Dynamics of magnetic flux during CC-tapes local magnetization
Achille Angrisani Armenio (ENEA)
- Speaker at Behavior of Bi-2212 wires above liquid Helium temperature: critical current, irreversibility field and filaments coupling
Irina Anishenko (National Research Nuclear University MEPhI)
- Speaker at Features of the formation of pinning centers in HTS tapes under the laser irradiation action
Diego Arbelaez
- Speaker at Design and test results for a canted-cosine-theta dipole subscale magnet series
Yosuke Atake (Graduate School of Engineering, Tohoku University)
- Speaker at Evaluation of magnetic field dependence of interface resistivity in REBCO tape with the contact-probing current transfer length method
Ignacio Aviles Santillana (CERN)
- Speaker at Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb3Sn Low-β Quadrupole MQXF
Satoshi Awaji (Tohoku University)
- Speaker at 25.1T generation in 25T cryogen-free superconducting magnet with a modified Bi2223 insert
Romain Babouche (CEA French Alternative Energies and Atomic Energy Com)
- Speaker at Analytical modeling of coupling losses in CICCs, extensive study of the COLISEUM model
Arnaud Badel (Tohoku University)
- Speaker at Design considerations for practical very high field cryogen-free superconducting magnets: 33 T and beyond
Karie Badgley (Fermilab)
- Speaker at Magnetic Measurement and Cold Test Results of the Mu2e Transport Solenoid Coils
Dario Baffari (CERN)
- Speaker at Effect of the sub-elements layout on the electro-mechanical properties of high Jc Nb3Sn wires under transverse load
Nadezda Bagrets (KIT)
- Speaker at Thermal resistance between metallic surfaces of copper and stainless steel at different temperatures and contact pressures for high current HTS Cable-in-Conduit Conductors
ye bai (GE Global Research Center)
- Speaker at Magnet design for electron-beam additive manufacturing
Nitin Bairagi (Institute for Plasma Research)
- Speaker at Preliminary design and analysis of 20 K helium cooled MgB2 based superconducting current feeder system for Tokamak application
Hugo Bajas (CERN)
- Speaker at Flux Concentrator Optimization for Future Positron Sources
Thanatheepan Balachandran (University of Illinois at Urbana Chamapign)
- Speaker at Methods of Estimating AC Losses in Multi-filamentary Superconducting Windings with Spatial and Time Harmonics
Sang Jae Ban (Jeonbuk National University)
- Speaker at Study on AC Over-Current Characteristics with the Physical Properties of the Outer Layer of REBCO Superconducting Wire Having Composite Structure Using RF Sputtering Deposition Method
Jeseok Bang (Seoul National University)
- Speaker at Real-time Field Mapping of Screening Current induced Fields in an HTS Pancake Coil using a Hall Sensor Array
Tae-Kyoung Bang (Republic of Korea /Chungnam National University)
- Speaker at Comparative Study of MW class Superconducting Machines according to Shielding and Electromagnetic Structures Based on Analytical Method
- Speaker at Experimental and Comparative Study of Noise Vibrations and Harshness of Permanent Magnet Machines according to Rotor Eccentricity with Two Different Fractional Pole/Slot Combinations
Seungmin Bang (Hanyang University)
- Speaker at Evaluation of Selection Criteria for the Level of Liquid Nitrogen in HTS Magnet System
Nobuya Banno (National Institute for Materials Science)
- Speaker at Microstructure and superconducting properties of Hf,Ta-added bronze-route Nb3Sn wire
- Speaker at Novel Pb- and Cd-free superconducting joint between NbTi and Nb3Sn wires using high-temperature-tolerable superconducting Nb-alloy intermedia
Daniel Barna (Wigner Research Centre for Physics)
- Speaker at The Superconducting Shield (SuShi) septum magnet prototype
Shaon Barua (Florida State University)
- Speaker at Use of Critical Current Distribution Measurements in Bi-2212 Round Wires as a tool to significantly enhance and stabilize the $J_{\text{c}}$ properties
emanuela barzi (Fermilab)
- Speaker at Conductors for Fast Ramping Accelerator Magnets
- Speaker at Minimum Quench Energy of Nb3Sn Wires and Rutherford Cables with High Specific Heat
- Speaker at Minimum Quench Energy of NbTi and Nb3Sn Conductors Impregnated with High Heat Capacity Resin
Juan Bascuñán (Massachusetts Institute of Technology)
- Speaker at A Validation Study of Updated Features in a New 835-MHz REBCO Insert Coil for the MIT 1.3-GHz NMR Magnet
Pierre Bauer (ITER Organization)
- Speaker at Development of a AC Loss Model for the ITER CS Coils
JEROME BEARD (CNRS)
- Speaker at Recent developments at the pulsed magnetic field facility of the LNCMI
Mike Beck (University of Cambridge)
- Speaker at Mitigation of non-uniform current distribution in bulk high-temperature superconducting rings for the generation of NMR-grade magnetic fields
Wu Beimin (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Mechanical validation of the Combined Support Structure for FECR Nb3Sn Superconducting Magnet Prototype
boris bellesia (fusion for energy)
- Speaker at Status of the production of the European ITER Toroidal Field Coil Insertion.
Tong Ben (China Three Gorges University)
- Speaker at Reactor Vibration Reduction Using Global Topology Optimization Algorithms
Markus Bendele (THEVA Dünnschichttechnik GmbH)
- Speaker at Advanced HTS tape for high-field applications by THEVA
José Bennet (CEA Saclay IRFU/DACM)
- Speaker at Various methodologies used in the mechanical analysis of TF coils for EU DEMO
Andrea Bersani
- Speaker at A complete magnetic design for the DUNE ND-GAr solenoid magnet
Yanbo Bi (Shanghai Jiaotong University)
- Speaker at A temperature and over current controlled persistent current switch for high temperature superconducting magnets
Mark Bird (FSU)
- Speaker at [Invited] Some Lessons Learned During 27 Years Operating Above 27 Tesla.
Uijong Bong (Seoul National University)
- Speaker at A Numerical and Experimental Study on Dynamic Operation of a Synchronous Rotating Machine with NI HTS Field Windings
Roberto Bonifetto (Politecnico di Torino)
- Speaker at Analysis of the thermal-hydraulic effects of a plasma disruption on the DTT magnet system
Alessandro Bonito-Oliva (Fusion for Energy)
- Speaker at About the first 6 toroidal field coils and 2 poloidal field coils completed by EU for ITER
Bernardo Bordini (CERN)
- Speaker at The Nb3Sn superconductor procured for the High Luminosity Upgrade of the Large Hadron Collider
Daniela Boso (University of Padova)
- Speaker at A top-down modeling approach for DEMO magnetic system
Ernesto Bosque (National High Magnetic Field Laboratory)
- Speaker at Quench Protection and Cyclic Fatigue Test Results for MTI Coils in the 40T All-superconducting Magnet Project at the NHMFL
Rodger Bossert (Fermi National Accelerator Laboratory)
- Speaker at Design of the Fermilab Pre-Series Cold Mass for the HL-LHC Accelerator Upgrade Project
Konstantinos Bouloukakis (Victoria University of Wellington)
- Speaker at Sudden discharge measurement system and results for 100 mH class no-insulation coils
Aleksei Bragin (Budker Institute of Nuclear Physics (RU))
- Speaker at Performance of 7 T dry solenoid for THz spectroscopy
Marco Breschi (Universita e INFN, Bologna (IT))
- Speaker at Analysis of AC losses in the tests of the ITER CS Module #2
Greg Brittles (Tokamak Energy)
- Speaker at Development of the “Demo4” 1.5m-scale spherical tokamak HTS magnet demonstrator at Tokamak Energy
Lucas Brouwer (Lawrence Berkeley National Laboratory)
- Speaker at [Plenary] Coupling superconducting magnet technology with large momentum acceptance beamlines to enable lightweight, high performance gantries for ion beam cancer therapy
- Speaker at Design and Test of a Superconducting Lens for an Ultra-Stable Electron Microscope
- Speaker at Design of CCT6: a large-aperture, 12 T, Nb3Sn Dipole Magnet
- Speaker at Persistent Current Stabilization and Tuning of Bi-2223 HTS Coils
Pierluigi Bruzzone (EPFL-SPC)
- Speaker at Introduction
- Speaker at Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO
Benjamin Bryant (Oxford Instruments Nanoscience)
- Speaker at Performance of compact wind-and-react MgB$_2$ solenoid coil made with continuously produced cable
Victor Bykov (Max-Planck Institute for Plasmaphysics)
- Speaker at Further Development of the W7-X Magnet System FE Global Model in Preparation for Enhanced Operation Phase
Zhenming Cai (State Key Laboratory of Advanced Electromagnetic Engineering and Technology)
- Speaker at The Coil Optimization Design of H-SFCL Applied in Ship DC System
Barbara Caiffi
- Speaker at [Plenary] Nb3Sn: beyond NbTi, for moving beyond the Standard Model
Alessio Capelluto (ASG Superconductors)
- Speaker at BSCCO geometrical and soldering optimisation for high current lead application
- Speaker at Low field MgB2 and NbTi fast ramped coils: temperature behaviours empirical comparison.
David Carrillo (CERN)
- Speaker at Lifetime Studies of Electrolytic Capacitors Installed in the Protection Systems of the Superconducting Magnets in the Large Hadron Collider at CERN
Antomne Caunes (Tokyo University of Marine Science and Technology)
- Speaker at Numerical modeling of the pulse field magnetization of the bulk array used as the field poles of a superconducting machine
Giuseppe Celentano
- Speaker at Designing and Manufacturing of REBCO-based Al-slotted core Cable-In–Conduit Conductors for quench experiments
Yoon Seok Chae (Jeju National University)
- Speaker at Analysis and Experiments on Electrical and Thermal Characteristics of REBCO Racetrack Coil co-wound by Stainless Steel Tape under asynchronous rotating magnetic field
Najib Cheggour (FSU)
- Speaker at Root Cause of the Strain Irreversibility Cliff in RRP® Nb3Sn Wires
Yuquan Chen
- Speaker at Fabrication and Test of a 1.5 T Cryogen-Free HTS Magnet for the Heavy Ion Spectrometer
Shunzhong Chen (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Quench Analysis of the 9.4-T Whole-Body MRI Superconducting Magnet
Yuan Chen (University of Science and Technology of China)
- Speaker at The Pole Profile Optimization of High-gradient Quadrupole for the HALF Storage Ring
Chih Wei Chen (National Synchrotron Radiation Research Center)
- Speaker at A Low-Temperature-Dependent Calibration of Hall probes for CPMU
Dachuan Chen
- Speaker at A miniaturized high temperature superconducting flux pump
Geng Chen (State Key Laboratory of Advanced Electromagnetic Engineering and Technology)
- Speaker at Design and optimization of combined-function quadrupole-sextupole magnets
wan chen
- Speaker at THE MAGNETIC FIELD MEASUREMENT SYSTEMS FOR Pr2Fe14B Based CRYOGENIC UNDULATOR AT HEPS
Long Chen (China Three Gorges University)
- Speaker at Dynamic magnetic hysteresis modeling based on improved parametric magneto-dynamic model
Yanxing Cheng (Southwest Jiaotong University)
- Speaker at Levitation characteristics of high-temperature superconducting bulks under different orientations and arrays
Daniel Cheng
- Speaker at An examination of the mechanical performance of the 4.5 m long MQXFA Pre-Series magnets for the Hi-Lumi LHC Upgrade
Junsheng Cheng (Institute of Electrical Engineering, Chinese Academy of Science)
- Speaker at Design and experiment of the conduction cooled superconducting magnet for crystal growth application
Noriko Chikumoto (Chubu University)
- Speaker at Application of direct diffusion bonding technique for preparation of low-resistivity joint in REBCO coated conductors
Guram Chlachidze (Fermilab)
- Speaker at Fermilab’s Horizontal Test Stand Upgrade Overview and Commissioning
Eun Jung Cho (GSI)
- Speaker at Designing and Manufacturing of the Fully Configured Multiplet for the Super-FRS at FAIR
Han-Wook Cho (Chungnam National University)
- Speaker at Design and Preliminary Experiments of Rotating Armature Partial Superconducting Air Core Generator
Jun Hyuk Choi (Sam Dong Co., Ltd.)
- Speaker at Development of MgB2 superconducting wires at Sam Dong Co., Ltd.
Jongho Choi (Supercoil Co., Ltd.)
- Speaker at Recent Development Trends of a 1.2 MW Superconducting Induction Heater using MgB2 NI Magnets
Kibum Choi (Seoul National University)
- Speaker at Design of a Cryogen-free 6 T 320 mm All-REBCO MRI Magnet
Yoonhyuck Choi (Facility for Rare Isotope Beams at Michigan State University)
- Speaker at Energization and Magnetic Field Mapping Results of Cold Iron Quadrupole Triplet for Vertical Pre-Separator of the Facility for Rare Isotope Beams
yong chu
- Speaker at Design of Quench Protection System for K-DEMO TF Magnet
Yoon Do Chung (Suwon Science College)
- Speaker at Conceptual Design of Multi Power Receivers for Wireless Power Supply of Quench Detector with Highly Insulating Stability under Superconducting High Field Magnet
- Speaker at Design and Performance for Wireless Power Charging Module combined with HTS Resonance Coils under Different Frequency Ranges in Superconducting MAGLEV Trainv
Tim Coombs
- Speaker at Compact MRI
Valentina Corato (ENEA)
- Speaker at [Invited] Strategy for developing the EU-DEMO Magnet System in the Conceptual Design Phase
Anang Dadhich (Institute of Electrical Engineering, SAV)
- Speaker at A complete, coupled model for Electro-Magnetic, Electro-Thermal and Mechanical analysis for axi-symmetric coils using variational principles
Masanori Daibo
- Speaker at Recent progress of RE-based High Temperature Superconductors at Fujikura
Kazuhiro Daiho (Hokkaido University)
- Speaker at AC loss simulation of NI REBCO pancake coils in external low-frequency magnetic field
Michael Daly
- Speaker at Introduction and results of the Bonding Experiments (BOX).
Magnus Dam
- Speaker at Characterization of a soldered metal insulation HTS ReBCO demonstrator coil for an astroparticle physics experiment in space
Laura D'Angelo (Technische Universität Darmstadt)
- Speaker at Quasi-3D Magneto-Thermal Quench Simulation of Superconducting Magnets
Daniel Davis (FSU/NHMFL)
- Speaker at Test Results of Alternative Magnet Technologies for HTS Magnet Quench Detection and Protection
Marco De Bastiani (Politecnico di Torino)
- Speaker at A 3D electromagnetic model for eddy currents analysis in superconducting magnets for fusion applications
Nikkie Deelen (CERN)
- Speaker at Design and quench analysis for transparent superconducting solenoids for the Innovative Detector for Electron-positron Accelerators at the lepton Future Circular Collider
Michael De Leon (Andong National University)
- Speaker at Bending strain sensitivity of critical current in REBCO CC windings with different pitches on a large diameter former under static fatigue condition at 77 K
Gianluca De Marzi (INFN e Laboratori Nazionali di Frascati (IT))
- Speaker at Magnetic and Electromechanical Characterization of a High-Jc RRP wire for the MQXF Cable
Federica Dematte (EPFL)
- Speaker at Heat Treatment Optimization on Nb3Sn Strands Based on Electrical and Physical Properties
Ernesto De Matteis (INFN)
- Speaker at Magnetic Measurements Results and Analysis of the First Batches of Superferric Magnets for the HL-LHC High Order Field Correction
Eugeni Demikhov (FIAN)
- Speaker at Design of 6T superconducting solenoid system for spin polarization control at NICA collider
Zigang Deng
- Speaker at A High-Speed Maglev Test Rig Designed for HTS Pining Levitation and Electrodynamic Levitation
Changdong Deng (institute of High Energy Physics, CAS)
- Speaker at Transient Simulation and Field Measurement of Trim Quadrupoles and AC Sextupoles for CSNS/RCS Upgrade
Andries den Ouden (Radboud University, Nijmegen, The Netherlands)
- Speaker at [Invited] Status of the HFML-Nijmegen 45 T Hybrid Magnet
Mukesh Dhakarwal (High Energy Accelerator Research Organization/KEK)
- Speaker at Influence of Zn addition in Cu matrix on the mechanical and superconducting properties of Nb$_3$Sn conductor
Mark Angelo Diaz (Andong National University)
- Speaker at Development of a Simple Measurement System for Electromechanical Performance Evaluation of REBCO Coated Conductor Tapes
Ortensia Dicuonzo (EPFL-SPC)
- Speaker at Analysis of the Quench Experiments on HTS conductors
Joseph DiMarco (Fermilab)
- Speaker at Magnetic Measurements of HL-LHC AUP Cryo-Assemblies at Fermilab
Kaizhong Ding (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Thermal-electrical coupling quench study of HTS cyclotron for medical application
Iain Dixon (Florida State University)
- Speaker at Cyclic Axial Pressure Limits of REBCO Double Pancake Coils with Variable Co-wind Dimensions at 77 K
Aldo Di Zenobio (ENEA)
- Speaker at DTT: a challenging framework for a sound superconducting magnets design
Yutaro Doi (Kyushu university)
- Speaker at Effect of precursor film thickness and heat-treatment temperature on superconducting joint
Tenghui Dong (Kyoto university)
- Speaker at [Invited] Experimental and theoretical study on power generation characteristics of 1 kW class fully high-temperature superconducting induction/synchronous generator using a stator winding with a bending diameter of 20 mm
Fangliang Dong (Shanghai Jiao Tong University)
- Speaker at R&D of a No-insulation HTS Magnet for Small-Scale Bilateral HTS Linear Synchronous Motors
Ho Ik Du (Jeonbuk National University)
- Speaker at Comparison of Current Limiting Characteristics of REBCO Superconducting Wire of the Electrical Coupling Condition between Core and Coil
Pu Duan (Huazhong University of Science and Technology)
- Speaker at Thermal Stability Analysis of No-insulation Magnet under Dynamic Operational Conditions
Unai Duranona (CEA)
- Speaker at Experimental analysis of quench behavior in a Cable-In-Conduit-Conductor cooled by stagnant superfluid helium
Abdelrahman El-Wakeel (University of Strathclyde)
- Speaker at Cryogenic DC/DC converter for superconducting magnet applications
Alexandre Esper (Ganil)
- Speaker at 3D magnetic field maps and alignment of the Superconducting Multipole Triplet (SMT)
philippe fazilleau (cea)
- Speaker at Self-protecting behavior of Metal-as-Insulation windings made of High Temperature Superconductor tapes
Sandor Feher (FNAL)
- Speaker at [Invited] AUP first pre-series Cryo-Assembly Design Production and Test Overview
NING Feipeng (Institute of High Energy Physics, Chinese Academy of Sciences)
- Speaker at Development and preliminary test of Aluminum stabilized Stack ReBCO Tape Cable
Enrico Felcini (EPFL - Ecole Polytechnique Federale Lausanne (CH))
- Speaker at Feasibility Study of GaToroid Gantries for Carbon Ions
Paolo Ferracin
- Speaker at Superconducting coil stress specifications for the series production of the Nb3Sn MQXFA quadrupole magnets for the HL-LHC
- Speaker at Towards 20 T hybrid accelerator dipole magnets
Marc Ferrater (Fusion for Energy)
- Speaker at Current Centre Line calculation method and results for ITER Poloidal Field Coils
Vittorio Ferrentino (CERN)
- Speaker at Thermal analysis of powering and protection transients in a superconducting magnet for medical applications
Chiarasole Fiamozzi Zignani (ENEA)
- Speaker at DC and AC characterization of a Low-Field Nb3Sn prototype conductor for a DEMO TF Coil
Eric Forton (IBA - Ion Beam Applications)
- Speaker at [Plenary] Radiation Therapy Systems
Arnaud Pascal Foussat (CERN)
- Speaker at Conceptual Design of the HL-LHC Hollow electron lens superconducting magnet system
- Speaker at Mechanical characterisation of Nb3Sn cable insulation systems at ambient and cryogenic temperature used for HL-LHC accelerator magnets.
Ashleigh Francis (National High Magnetic Field Laboratory)
- Speaker at The effects of nanostructure on Jc(B, T) in ReBCO coated conductors at multiple angles
Yutong Fu (1.Shanghai Jiao Tong University 2.Chongqing University)
- Speaker at Electromagnetic Shielding Technique for No-insulation Superconducting Rotor Windings in Electrical Aircraft Propulsion
Kai Fukano (Sophia University)
- Speaker at Increase of thermal stability caused by high thermal conduction VFRPs in conduction-cooled HTS coils
Hibiki Fukuda (Okayama University)
- Speaker at The critical properties and AC loss characteristics of the developed ultra-fine and flexible Nb3Al superconducting wires
Kazuma Fukui (National Institutes for Quantum and Radiological Science and Te)
- Speaker at The pressure drop measurement of JT-60SA superconducting magnets
Satoshi Fukui (Niigata University)
- Speaker at Investigation of AC Loss Characteristics of REBCO Armature Developed for 50 kW-class HTS Induction/Synchronous Motor
Waku FUNAKOSHI (Kagoshima University)
- Speaker at Measurement of AC loss characteristics of HTS sample coils under the conditions assumed for use in power electronics devices
Muneo Futamura (Akita Prefectural University)
- Speaker at Rail magnets arrangement for improving stability of a superconducting transport system
Yasuhiro Fuwa (Japan Atomic Energy Agency)
- Speaker at Development of Hybrid Multipole Permanent Magnet for High-Intensity Beam Transportation
- Speaker at Property of Praseodymium Permanent Magnet for Cryogenic Hybrid Magnet
- Speaker at Radiation-Induced Demagnetization Measurement of Permanent Magnet Materials by Systematic Neutron Irradiation
Artur Galt (Fermi National Accelerator Laboratory (FNAL))
- Speaker at A Quench Detection and Monitoring System for Superconducting Magnets at Fermilab
Tom Galvin (M&I materials ltd)
- Speaker at Superconducting Magnet Energy Extraction with Varistors to Reduce Quench Voltages and Hot-Spots
- Speaker at Varistor Insulation for HTS Magnets
Peng Gao (Institute of Plasma Chinese Academy of Sciences)
- Speaker at Development of superconducting joints between bronze-route Nb3Sn multifilamentary wires for persistent-mode operation
- Speaker at Inter-wire contact force induced critical current degradation of Bi-2212/Ag round wires reacted with and with no pre-pressure
Yusong Gao (Shanghai Jiao Tong university)
- Speaker at The study of overcurrent excitation for NI HTS coils
Laura Garcia Fajardo (Lawrence Berkeley National Laboratory)
- Speaker at Introduction
- Speaker at Integration of Bi-2212 and Nb3Sn CCT magnets for a hybrid magnet test
Jesus Angel Garcia Matos
- Speaker at Fine tuning of the inner dipole design of MCBXF magnets
Luis Garcia-Tabares (Centro de Investigaciones Energéti cas Medioambientales y Tecno)
- Speaker at Concept Design of a Novel Superconducting PTO Actuator for Wave Energy Extraction
Clément Genot (CEA Paris Saclay)
- Speaker at Transient behavior of a REBCO No-Insulation or Metal-as-Insulation multi-pancakes-or racetracks- coil using a Partial Element Equivalent Circuit model.
Lorenzo Giannini (ENEA)
- Speaker at Engineering the main structures of the DEMO fusion reactor magnet system
Francesco Giorgetti (University of Tuscia)
- Speaker at Preliminary structural analysis of the DTT current feeders conductors and clamps
Mikhail Glyavin (IAP RAS)
- Speaker at Novel magnetic systems for high power microwave sources – challenges and prospects
Fedor Gömöry (Slovak Academy of Sciences)
- Speaker at Probability of premature quenching of HTS coil due to local reduction of critical current
Tianyong Gong (Southwest Jiaotong University)
- Speaker at AC losses of high temperature superconducting magnet under the external magnetic fields generated by the ground coils of electrodynamic suspension train
Quentin Gorit (CEA)
- Speaker at JT-60SA TFC02 COMPLEMENTARY QUENCH TESTS IN CTF: THERMOHYDRAULICAL ANALYSIS AND SMOOTH QUENCH CRITICALITY
Arsenii GORYNIN (École normale supérieure Paris-Saclay)
- Speaker at Multiphysics study of phase transformations in Nb3Sn strands during Heat Treatment
Stephen Gourlay (LBNL)
- Speaker at [Invited] Lessons Learned in the Development of Accelerator Magnets based on Nb3Sn and HTS
Bert Green (National High Magnetic FIeld Lab)
- Speaker at A Pulse Forming Network Power Supply for Quench Protection Heaters
Michael Green (Lawrence Berkeley Laboratory)
- Speaker at The Effects of Conductor Magnetization on the Magnetic Field in an Accelerator Magnet System with Various Conductors
Wang Guangda (HUST)
- Speaker at Further analysis of the mechanical and thermal properties of ice in the ice impregnated high temperature superconducting coils
Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Science)
- Speaker at A novel cryogenic model for SiC MOSFET
- Speaker at A Novel Quench Detection Method for SMES
- Speaker at An adaptive control strategy of electromagnetic bearing for flywheel energy storage based on online parameters identification
- Speaker at Current Source Converter Based Photovoltaic Synchronous Generator Incorporated with a SMES
- Speaker at Wind photovoltaic Synchronous Generating System integrating with a SMES for a Grid Forming Renewable Energy System
Zichuan Guo (Institute of Plasma Physics Chinese Academy of Sciences)
- Speaker at Manifestation of electromagnetic performance degradation of Nb3Sn cable-in-conduit conductor in the change of its mechanical structure
Qiang Guo (WST)
- Speaker at Study on the Optimum Microstructure of High Jc Nb3Sn Wire after medium heat treatment
Liang Guo
- Speaker at Structural Design and Analysis of Cryogenic System for 3.5 T HTS Magnetic Separation Facility
Ramesh Gupta (BNL)
- Speaker at Magnetic Design of the EIC IR Cable Magnets
- Speaker at Proof-of-Principle Demonstration of a Novel Overpass/Underpass High Field Dipole
Valentin Guryev (NRC Kurchatov institute)
- Speaker at Influence of reversible vortices motion on low-field features of magnetization in type-II superconductors with strong anisotropic pinning
Dong-Woo Ha (Korea Electric Research Institute)
- Speaker at HTS coil cooled with liquid hydrogen and fuel cell power source
- Speaker at The Study on Quench properties of 2G HTS coils using the tapes by Holing and Hole filling process
Seungyong Hahn (Seoul National University)
- Speaker at [Invited] Lessons Learned in No-insulation HTS Magnet Technology
Yu Haiyang (Southwest Jiaotong University)
- Speaker at Optimization of the Levitation Performance for the Fully-Superconducting Magnetic Bearing
Alexandre Halbach (Tampere University)
- Speaker at High-performance simulation of the magnetic field in superconducting magnets using domain decomposition algorithms in the Sparselizard open source FEM library
Ke Han (Florida State University)
- Speaker at Deformation of Copper Matrix Conductors under Cyclic Loading
Houxiang HAN
- Speaker at Design of DC Magnet for Super-X Test Facility
- Speaker at Analysis of Radial Preload of 14 T MRI Magnet
Xiaotao Han
- Speaker at A Flexible Control System Design of Pulsed High Magnetic Field Facility based on Physical Model
- Speaker at Analysis and design of Control Sequence for Multi-Stage and Ultrahigh Magnetic System at WHMFC
TAE HEE HAN (joungwon university)
- Speaker at Analysis on Fault Current Limiting and Recovery Characteristics of Three-Phase Transformer Type SFCL using Two SMs between Secondary Windings
- Speaker at DC Fault Current Limiting Characteristics of Flux-Lock Type SFCLs with Parallel and Series connection between Two Coils
- Speaker at Fault Current Limiting Operations of Three-Phase Transformer Type SFCL using Secondary Windings with Closed Loop
Jinwoo Han (Korea Polytechnic University)
- Speaker at AC loss of HTS coils wound with various types of CORC
XU HANG
- Speaker at A Simple Calculation Method for Center Magnetic Flux Density of a Magnetic Core Electromagnet with a Wide Air-Gap
- Speaker at Feasibility Study on a Real-Scale High-Frequency Electromagnets for Magnetic Hyperthermia Base on a Magnetic Scaling Law
Izak Hanse (University of Twente)
- Speaker at [Invited] Modelling and characterization of a ReBCO HTS degaussing demonstrator
Luning Hao (University of Cambridge)
- Speaker at Conceptual Design and Optimisation of HTS Roebel Tapes
Chen Haozhou (Tokyo Metropolitan University)
- Speaker at Removal of magnetic fine particles from non-magnetic fine powder by high gradient magnetic separation under dry condition
Zach Hartwig (MIT)
- Speaker at [Invited] The SPARC Toroidal Field Model Coil
Yuta Hasegawa (Tokyo University of Agriculture and Technology)
- Speaker at Synthesis and Current Transport Properties of Ba(Fe,Co)2As2 Polycrystalline Bulks Prepared by Spark Plasma Sintering
Shoichi Hatakeyama (National Institutes for Quantum and Radiological Science and Technology)
- Speaker at Feasibility Study of Thyristor Rectifier with Unity Power Factor for Superconducting Magnet in Tokamak
Taishi Hatano (Tokyo Metropolitan University)
- Speaker at Superconducting properties of Ce and La co-doped RE123 thin films fabricated by fluorine-free MOD method
ye he
- Speaker at Evaluation of critical currents in Rutherford cables made of quasi-isotropic strands
Robert Herzog (Bruker Switzerland AG)
- Speaker at [Plenary] Commercial Ultra-High-Field NMR Magnets with HTS Conductors
Kohei Higashikawa (Kyushu University)
- Speaker at Development of DC Superconducting Cable with Magnetic Energy Storage Function for Compensating Power Fluctuation from Renewable Energy Sources
Cornelia Hintze (THEVA Dünnschichttechnik GmbH)
- Speaker at Manufacturing technologies for cost effective HTS coils and magnet systems
Masaaki Hirai (Fukui University of Technology)
- Speaker at Fundamental research for design of composite materials in vacuum environments
Tomo Hirata (Okayama University)
- Speaker at Study on the structure design for high performance non-contact rotating machine using HTS bulks
Honoka Hirayama (Ibaraki University)
- Speaker at Control of Rotatable-Quadrupole Magnets Angles for 3-D Spiral Injection Test Experiment
Fujita Hirokazu (Kyoto University)
- Speaker at Coupling time constant measurements of short pieces of copper-plated multifilament coated conductors at 4.2 K and 77 K
Yuta Hirose (Sophia University)
- Speaker at Estimation of the Cool-Down Speed under the SHe inlet condition in JT-60SA CS module
Erina Hirose (Institute of Particle and Nuclear Studies, High Energy Accelerator Research Organization)
- Speaker at A New Branching Point and Primary Beam Line at the J-PARC Hadron Experimental Facility
Megumi Hirota (Naval Ship M&UEP R.C., NPO)
- Speaker at Concept Design of Power Source for High Temperature Superconducting Ship Deperming Coil System
Yamada Hiroyuki (Nagoya University)
- Speaker at Conductive micro-path for current sharing between REBCO tapes in high-Tc superconducting conductors to improve stability
Yoshimitsu Hishinuma (National Institute for Fusion Science)
- Speaker at Jc performance under the transverse compressive stress on the bronze matrix reinforced Nb3Sn multifilamentary wires
Wei Hong (Tianjin University)
- Speaker at A propulsion-function-integrated HTS maglev system based on reversed excitation mode of electromagnetic guideway
wenzhe hong
- Speaker at Thermodynamic Behavior Analysis and Heat Transfer Structure Design of Helium Bubble Aggregation in High Field Superconducting Magnets
Jintao Hu (University of Cambridge)
- Speaker at Dynamic loss and magnetization loss of HTS coated conductors with magnetic substrate
Qiang Hu (Institute of Modern Physics of Chinese Academy of Science)
- Speaker at The influence of friction between layers of coil on the magneto-mechanical behaviors of YBCO superconducting magnet
Jyun-Rong Huang (National Cheng Kung University)
- Speaker at Simulation of the Magnetic Particle Trajectory in a Vein for MDDS Application
Thanh Anh Huynh (National Cheng Kung University)
- Speaker at Impact of Rotor Eccentricity and Current Harmonics on High-Speed Permanent Magnet Generator Performance for Microturbine Applications
Young Jin Hwang (Korea Basic Science Institute)
- Speaker at Design and Characteristics Analysis of a Laboratory Electromagnet applying HTS Coils
Muhammad Iftikhar (University of Strathclyde United Kingdom)
- Speaker at Minimizing the heat losses of a self-switching kA-class rectifier flux pump
Hiromi Iinuma (Japan/Ibaraki-University)
- Speaker at Design of a strong X-Y coupling beam transport line for J-PARC muon g-2/EDM experiment
Masami Iio (High Energy Accelerator Research Organization (KEK))
- Speaker at Irradiation effect on superconductivity of REBCO coated conductors
Kikelomo Ijagbemi (National High Magnetic Field Laboratory)
- Speaker at Quenching HTS Pancake Coils using Frequency Loss Induced Quench Protection System.
Chaemin Im (Seoul National University)
- Speaker at Long-Term Operation Results of a Stack of Metal Insulation HTS Pancake Coils for SMES Applications
Shinsaku Imagawa (National Institute for Fusion Science)
- Speaker at [Invited] Design, fabrication and soundness test of a Bi2223 magnet immersed in liquid hydrogen
Kazuo Inoue (National Institute for Materials Science)
- Speaker at Ultra-low resistance joints between Bi2223 and NbTi wires using superconducting Bi-Pb solder
Ryota Inoue (Tohoku University)
- Speaker at Basic study on coil structure for high-temperature superconducting cable termination applying a wireless power transmission system
- Speaker at Study on Low Loss Coil Structure for High Energy Density of a Wireless Power Transmission System Using High Temperature Superconducting Coils for Railway Vehicle
Masayoshi Inoue (Fukuoka Institute of Technology)
- Speaker at Air-gap Observation in Joints of REBCO Tapes by Use of X-ray Computed Tomography
Kimito Ishizuka (Tokai University)
- Speaker at Evaluation for Critical Current of REBCO coated conductor under various tensile strains and magnetic field angles.
Satoshi Ito (Dept. Quantum Science and Energy Engineering, Graduate School of Engineering, Tohoku University)
- Speaker at Joint resistance evaluation of longer HTS tape joints with indium insertion
Tetsuya Ito (Teral Inc.)
- Speaker at Development of Induction Heating Device Using HTS Magnet in Aluminum Extrusion Processing
Yury Ivanov (Chubu University)
- Speaker at Gas-cooled Peltier current leads for compact HTS devices
Sadanori Iwai (Toshiba Energy Systems & Solutions Corporation)
- Speaker at An HTS Model Magnet for MRI Systems Equipped with Electrically Conductive Epoxy Resin Used in Quench Protection
yoshihisa iwashita
- Speaker at Magnetic Field Shielding with Superconductors
Jaeyoung Jang (Korea university of technology and education)
- Speaker at A New Active Field Uniformity Improvement Method with Optimally Designed Compensation coils for Low-temperature Superconducting Magnets
Ji-Sol Jeong (Chosun University)
- Speaker at Analysis of cut-off characteristics of transformer-type superconducting DC circuit breaker according to reactance of superconductor and transformer turns ratio.
Qing Ji (Lawrence Berkeley National Laboratory)
- Speaker at Network model for REBCO pancake coils with heat transfer
Donghui Jiang (The High Magnetic Field Laboratory, Chinese Academy of Sciences)
- Speaker at [Invited] Conceptual Design Study of the Outsert superconducting Coils of the Hybrid Magnets
shan jiang
- Speaker at Design of Pulsed Power Supply for Repetitive Pulsed High Magnetic Field for Water Electrolysis
Zhaofei Jiang
- Speaker at Numerical evaluation of the potential methods of reducing screening-current-induced stress in NI-REBCO coil
Zhenan Jiang (Victoria University of Wellington)
- Speaker at [Invited] 15% reduction in AC loss of a 3-phase 1 MVA HTS transformer by exploiting asymmetric conductor critical current
Marc Jimenez (Fusion For Energy)
- Speaker at Current Centre Line control, results and comparison after the manufacturing of the ITER Toroidal Field Coils
Huan Jin
- Speaker at Development of ReBCO Insert Solenoids for Its High Field Application Performance Verification
- Speaker at Critical current of various ReBCO tapes under uniaxial strain
Libing Jing (China Three Gorges University)
- Speaker at A New Structure for the Coaxial Magnetic Gear with HTS Bulks
Mariusz Juchno (LBNL)
- Speaker at Shell-based support structure for the 45 GHz ECR Ion Source MARS-D
Kazuhiro Kajikawa (Sanyo-Onoda City University)
- Speaker at Finite Element Analysis of AC Loss Properties in Pancake Coils Wound Using Two-ply Bundle Conductor
Hideki Kajitani (National Institutes for Quantum and Radiological Science and Te)
- Speaker at The result of ITER TF coil double-pancake heat treatment in Japan
Petrus Kambo (Tokyo University of Marine Science and Technology)
- Speaker at Conceptual design of a linear generator suitable for marine energy power generation
Koji Kamiya (National Institute for Materials Science)
- Speaker at Conceptual design of a magnetic refrigerator for cooling quantum computers
Shintetsu Kanazawa (Muroran Institute of Technology)
- Speaker at Reduction of AC losses in REBCO split wire and coil without deterioration of critical current
- Speaker at Simultaneous manufacturing of multiple junctions between Bi2223 tapes with rapid melt joining
Rui Kang (Institute of High Energy Physics, CAS)
- Speaker at Detecting quench in HTS conductors with LTS conductors — a theoretical and numerical analysis
Milan Kapolka (University of Leicester)
- Speaker at Modelling of magnetization loss of CORC cables with three material laws and comparison with measurements
Mikko Karppinen (CERN)
- Speaker at Design of a Curved Superconducting Combined Function Bending Magnet Demonstrator for Hadron Therapy
Matthew Kasa (Argonne National Laboratory)
- Speaker at Design, Fabrication, and Testing of a 1.9 m Long, 16.5 mm Period NbTi Superconducting Undulator for the Advanced Photon Source Upgrade
VLADIMIR KASHIKHIN (Fermilab)
- Speaker at HTS Dipole Magnet Model for the Persistent Current Operation
- Speaker at Magnetic Designs of New First Target Beamline Magnets for the ORNL SNS Upgrade
Shuma KAWABATA (Kagoshima University)
- Speaker at Highly sensitive measurement of AC loss characteristics of short and straight HTS tapes under transverse magnetic fields by a pickup coil method
Zhihao Ke (Southwest Jiaotong University)
- Speaker at Running State Detection of HTS Pining Maglev System Based on Deep Learning Algorithms
Ruben Keijzer (Universiteit Twente (NL))
- Speaker at Characterizing performance degradation through the analysis of V-I measurements in Nb3Sn accelerator magnets
Ibrahim Kesgin (Argonne National Laboratory)
- Speaker at Design, Construction, and Testing of 0.5-m-long, 18-mm Period Nb3Sn Superconducting Undulator Magnets
Akihiro Kikuchi (National Institute for Materials Science)
- Speaker at A Novel High Heat Capacity Resin for Impregnation of Nb3Sn Superconducting Magnets
- Speaker at Jelly-Roll Processed Nb3Al Super-Fine Monofilament Wires with Cu/non-Cu Ratio of 1.0
Sho Kikuchi (Shibaura Institute of Technology)
- Speaker at First NMR Signal Detection on Single-sided Magnetic Pole Surface Containing HTS Bulk Magnet Activated by Pulsed Field
SEOKBEOM KIM (Okayama University)
- Speaker at Study on the structure design of HTS bulk magnets for compact MRI
Hoseung Kim (Hanyang.ac.kr)
- Speaker at Surface Dielectric Characteristics of GFRP and PTFE in Cryogenic Environment under the Switching Impulse Superimposed on DC Voltage
Hyungjun Kim
- Speaker at Status and Progress on First-of-a-Kind Feeder Busbar Joint Assembly at ITER Magnet System
Geonyoung Kim (Seoul National University)
- Speaker at Experiment and analysis of spatial electromagnetic and thermal behaviors during quench propagation in no-insulation HTS coil with multi-physics distributed-circuit approach
Young-Gyun Kim (Korea Institute of Fusion Energy)
- Speaker at Preliminary Design Study on HTS Toroidal Field Coils Using Non-Twisted Conductors and Cables
Geon-woong Kim (ChosunUniversity)
- Speaker at Comparison and analysis of inductance according to toroidal winding type of superconducting element combined the DC circuit breaker
Yongrok Kim (Hanyang University)
- Speaker at Trap Energy Distribution of PPLP according to PP ratio at cryogenic temperature
Ji Hyung Kim (Jeju National University)
- Speaker at Investigation on Quench and Normal Zone Propagation Behaviors of REBCO Coil wound by vanadium III oxide turn-to-turn insulator
- Speaker at Investigation on thermal and electrical stabilities of REBCO coil insulated by vanadium III oxide under various disturbance environments
Youngjae Kim (National High Magnetic Field Laboratory)
- Speaker at Experimental Study on Effectiveness of Different Reinforcement Layouts Applied to Recent Bi-2212 Test Coils
Jiman Kim (Kiswire Advanced Technology)
- Speaker at Optimization of the react and wind coil manufacturing process using MgB2 twisted cable
Hyun Wook Kim (Korea Institute of Fusion Energy)
- Speaker at Concept Design Study of a Conductor Test Facility Magnet over 16T
Younghoon Kim (Department of Materials Science and Engineering, Korea University, Seoul, 02841, Korea)
- Speaker at Enhanced Thermal and Electrical Properties of GdBCO Magnets Impregnated with Epoxy Composites Containing Various Fillers
Junil Kim (Korea Electrotechnology Research Institute)
- Speaker at Thermal and electrical characteristics of NI HTS coil fabricated by diffusion bonding technique
Hyung-Wook Kim (Korea Electrotechnology Research Institute)
- Speaker at Current Bypass of a Metal Stitching Smart Insulation 2G HTS Coil
- Speaker at Magnetic Field Reduction Phenomenon of a Metal Insulation and a No-insulation Coil by External Fluctuating Magnetic Field
Changhyun Kim (Changwon National University)
- Speaker at Experimental test and characteristic analysis of a real scale HTS coil for 10 MW HTS generator using performance evaluation system
Glyn Kirby (CERN)
- Speaker at Superconducting Curved Canted-Cosine-Theta (CCT) Nested and Combined Error Free Dipole Quadrupole Fields Coil Geometry for the HIE-ISOLDE Recoil Separator Ring Project.
- Speaker at Varistor Insulation for HTS Magnets
Takanobu Kiss (Kyushu University)
- Speaker at Hybrid Microscopy to Clarify Failure Mechanisms of REBCO Tapes in Meter-Class Pancake-Coils
Mayu Kitamura (Waseda University)
- Speaker at Numerical evaluation of transient thermal stability of no-insulation REBCO pancake coils with non-contact area between turns
Seok-Cheol Ko (Kongju National University)
- Speaker at DC Fault Current Limiting Characteristics of Flux-Lock Type SFCLs with Parallel and Series connection between Two Coils
- Speaker at Analysis on Fault Current Limiting and Recovery Characteristics of Three-Phase Transformer Type SFCL using Two SMs between Secondary Windings
- Speaker at Fault Current Limiting Operations of Three-Phase Transformer Type SFCL using Secondary Windings with Closed Loop
Kensuke Kobayashi (National Institute for Materials Science)
- Speaker at In-field evaluation of REBCO superconducting joint
Kazuma Kodaka (Hokkaido University)
- Speaker at Current behaviors of NI REBCO pancake coil wound with multi-bundled conductors during charging and against local normal state transition.
Motomune Kodama (Hitachi, Ltd.)
- Speaker at Feasibility study of novel rapid ramp-down procedure in MgB2 MRI magnet using persistent current switch with high off-resistivity
Norikiyo Koizumi (QST)
- Speaker at Completion of the first TF coil in the second manufacturing line in Japan
Charilaos Kokkinos (FEAC Engineering P.C.)
- Speaker at Design and Digital Twin of INFN’s main Nb3Sn 15T Dipole for CERN’s FCC
Dylan Kolb-Bond (NHMFL)
- Speaker at Screening Current Induced Field changes during De-energization with Axial Clamping
Toshihiro Komagome (MAYEKAWA MFG. Co., Ltd.)
- Speaker at AC Loss Measurement of Double Pancakes Wound with MgB2 Rutherford Type Superconductor
Mochimitsu Komori (Kyushu Institute of Technology)
- Speaker at Basic Study on Stable Levitation for Magnetically Levitated Mover (MAGLEM) Using High Tc SC Coils
Jaap Jeroen Kosse (PSI - Paul Scherrer Institut)
- Speaker at [Plenary] A circular economy using superconductors: magnetic density separation
- Speaker at NI test coil program at the Paul Scherrer Institute
Steve Krave (Fermilab)
- Speaker at Comparative Analysis of MAXFAP1b Coils with respect to Magnet Training Behavior.
Shota Kuki (Sophia university)
- Speaker at Flywheel uninterruptible power supply using superconducting induction machine
Mithlesh Kumar (PSI - Paul Scherrer Institut)
- Speaker at Thermal-hydraulic and quench analysis of EUROfusion DEMO PF coils
Kazuki Kume (Okayama University)
- Speaker at Evaluation of magnetic properties of REBCO wire by modified SST for cryogenics
Thomas Kurauchi (Hokkaido University)
- Speaker at Screening current simulation of REBCO pancake coils considering coil deformation
Yuuta Kurihara (tokai university)
- Speaker at Angular dependences of critical current for REBCO coated conductors under bending strains
Yasutoshi Kuriyama (Kyoto University)
- Speaker at Performance of Bipolar Correction Magnet with Permanent Magnets
Yuriy Kuzmin (Ioffe Physical Technical Institute of RAS)
- Speaker at Magnetic flux trapping and creep in 2G HTS wires containing normal-phase fractal clusters
Dawool Kwon (Department of Materials Science and Engineering, Korea University, Seoul, 02841, Korea)
- Speaker at Superconducting Joint for “Reacted” MgB2 multifilament Wires for the Development of MRI Magnets
Jin Kwon (The Ohio State University)
- Speaker at The Potential for the Use of Low AC Losses Hyperconducting Aluminum in Cryogenic Motors
Zhipeng Lai (Huazhong University of Science and Technology)
- Speaker at Optimum field shaper design for electromagnetic forming by balancing trade-off among energy efficiency, field distribution, and thermo-mechanical loadings
Jun-Yeop Lee (Changwon national university)
- Speaker at Design and Analysis of a Revolving Armature type Axial Flux High-Temperature Superconducting Motor
Wooseung Lee (FBML/PSFC-MIT)
- Speaker at [Invited] Stability of Two Impregnated 1.5-T NbTi Coils Operated in the 4.2-6 K Range, Paraffin vs. Solid Nitrogen
- Speaker at Partial-Insulation HTS Magnet for Reduction of Quench-Induced Peak Currents
Jung Tae Lee (Seoul National University)
- Speaker at Test and Analysis of Stacked-Tape-Wound Laboratory-Scale NI HTS TF Module Coil
Hunju Lee (SuNAM Co., Ltd.)
- Speaker at Report on the Improvement of In-field Critical Current in SuNAM’s Coated Conductor
Jaehwan Lee (Changwon National University)
- Speaker at A study on the electrical contact resistance and thermal conductivity of soldered-metal insulation coil with conduction cooling
Sergey Lelechov (ITER Design Center)
- Speaker at Conductor design for toroidal field coils of a high magnetic field tokamak TRT.
Gilles Lenoir (CERN)
- Speaker at Effect of transverse compressive stress on Nb3Sn Rutherford cables for accelerator magnets
Filippo Levi (INFN)
- Speaker at The separation-recombination dipole MBRD for the High-Luminosity LHC: from prototype to series
Zheng Li
- Speaker at Comparison of Solenoid-type and Annular-type Parallel Inductors Schemes in H-SFCL of Shipboard MVDC IPS
- Speaker at Electromagnetic Design and Performance Analysis of a Hybrid-Type Superconducting Fault Current Limiter in Shipboard MVDC IPS
Dake Li (Huazhong University of Science and Technology)
- Speaker at Design of an Active Power Compensator for 60T Flat-top High Magnetic Field System
Jun jun Li (ASIPP)
- Speaker at Thermal Hydraulic Analysis of Toroidal Field Coil of CFETR
Wenxin li (Tianjin University)
- Speaker at Optimized configurations for enhancing the interaction capacity between permanent magnet and superconductor coil
Chunyan Li (Institute of High Energy Physics, Chinese Academy of Sciences)
- Speaker at Effect of different bending diameters on the current-carrying capacity of iron-based superconducting tapes
Xin Li
- Speaker at Investigation of AC Current Transmission Capacity of 2G HTS Tapes Under Different Refrigeration Conditions
Songlin Li (Southwest Jiaotong University, Chengdu, China)
- Speaker at Design optimization and fabrication of HTS magnet with stepped cross-section
Yuxiao Li (southwest jiaotong university)
- Speaker at Structure Optimization of Linear Generator Coil in No-contact On-board Power Source for EDS Maglev
Lu Li (Shanghai Jiao Tong University)
- Speaker at High Temperature Superconducting Non-insulation Closed-loop Coils for Electro-dynamic Suspension System
Chunyi Li (State Key Laboratory of Advanced Electromagnetic Engineering and Technology)
- Speaker at Coil error analysis of a curved CCT magnet applied to a superconducting gantry
Jianwei Li (Suzhou Inn-Mag New Energy Ltd)
- Speaker at Larger Levitation Force Design of Magnetic Levitation Rail based on Topology Optimization of Halbach Array
Quan Li (University of Edinburgh)
- Speaker at Novel HTS magnet design for nuclear fusion
Liang Li (Huazhong University of Science and Technology)
- Speaker at A Novel Design of Multi-coil Magnet System for 100 T
Hong Li (Sichuan University)
- Speaker at The Test Results of a YBCO Racetrack Coil at 30K Incorporate a Novel Cryostat Suitable for a Linear-Motor Type Flux Pump Used on an Synchronous Motor
Xiaodong Li (Technical University of Munich)
- Speaker at Conceptual Design and AC Loss Analysis of an HTS Central Solenoid Winding Pack for the EU-DEMO Fusion Reactor
Meng Li
- Speaker at Toward flexible coil design for electromagnetic forming of both sheet and tubular metal by combining of coil and field shaper: Principle, Optimization, and Experimental validation
Xiaoxiang Li (Huazhong University of Science and Technology)
- Speaker at Relaxation of residual stress in the aluminum alloy ring by electromagnetic bulging method
Shuo Li (Northeastern University)
- Speaker at Dynamic resistance and dynamic loss of the partially coupled quasi-isotropic cable with consideration of the resistance at terminals
- Speaker at Influence analysis of the geometrical parameters on the ac loss of the double sided linear HTS induction motor under various operation conditions
Ming Li (Institute of Plasma Physics, Hefei Institutes of Physical Scien)
- Speaker at The research on double pancake coil of 1MJ high temperature superconducting magnet energy storage for the power system of NICA complex
Yu Liang (Institute of Modern Physics,Chinese Academy of Sicences)
- Speaker at Design and Test of a half-aperture Canted-Cosine-Theta multipole Prototype Magnet For the HIAF Fragment Separator
Min Liao (ITER)
- Speaker at [Invited] Bringing a Nuclear Quality Approach to Superconducting Magnets
- Speaker at Completion and Installation of the ITER Lower Poloidal Field Coils PF5 & 6
Cui Libin (Southwest Jiaotong University)
- Speaker at Multi-objective Optimization Design for Null-flux Superconducting Electrodynamic Suspension Using NSGA-II and Response Surface Method
Byung Su LIM (ITER)
- Speaker at Manufacturing of ITER PF2-6 Coil
- Speaker at Moving Toward Completion of manufacturing of ITER PF1 Coil
Sung-Hun Lim (Soongsil University)
- Speaker at Fault Current Limiting Operations of Three-Phase Transformer Type SFCL using Secondary Windings with Closed Loop
- Speaker at Analysis on Fault Current Limiting and Recovery Characteristics of Three-Phase Transformer Type SFCL using Two SMs between Secondary Windings
- Speaker at DC Fault Current Limiting Characteristics of Flux-Lock Type SFCLs with Parallel and Series connection between Two Coils
Kang Liu (Southwest Jiaotong University)
- Speaker at Force Characteristic Analysis of Active EDS System Under Different Control Currents
Haihong Liu (Institute of Plasma Physics Chinese Academy of Sciences)
- Speaker at Development of superconducting joints between bronze-route Nb3Sn multifilamentary wires for persistent-mode operation
XIAOCHUAN LIU
- Speaker at Research on Nondestructive Examination of Jacket Sections for CFETR TF Coil
Quanyue Liu
- Speaker at Analyses of Transient Electrical Behavior and Thermal Stability in No-Insulation REBCO Pancake Coils Using Electromagnetic-thermal Model
- Speaker at Contact Resistance Dependent Transient Loss of REBCO No-insulation Magnet using T-A formula during Ramping Process
Jianhui Liu (SouthWest JiaoTong University)
- Speaker at Influence of Traction Rod on the Dynamic Performance of High-temperature Superconducting Maglev Vehicle
Xiao Liu (Hefei Institutes of Physical Science, Chinese Academy of Scienc)
- Speaker at Critical Bending Radius Test and Analysis of 7-Filament Ba1-xKxFe2As2 Iron-Based Superconductor Tapes under 12 T Background Field
Jianhua Liu (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences)
- Speaker at Optimal Design for Permanent Magnet Distribution of the Tip of Flexible Endoscope Driven by Magnetic Navigation
XiaoGang Liu (ASIPP)
- Speaker at Evaluation of the screening current effect in an all-superconducting high-field magnet
- Speaker at Mechanical Analysis of a 14 T Whole-Body MRI Magnet
Yongfang LIU (SARI-CAS)
- Speaker at Development of A Prototype Kicker Magnet for Beam Distribution System of SHINE
Alessandro Lo Bue (Fusion for Energy)
- Speaker at Metrology in process control for the European Toroidal Field Coil project
Vito Lombardo (Fermi National Accelerator Laboratory)
- Speaker at Status of mu2e Transport Solenoid cold mass
Run Long (Sichuan University)
- Speaker at Preliminary Rotational Test of an HTS Synchronous Motor with Linear-Motor Type Flux Pump Exciters
Jiajie Long (Huazhong University of Science and Technology)
- Speaker at High-temperature superconducting cable optimization design software based on 2-D electromagnetic thermal analysis model
Jose Lorenzo (Barcelona Supercomputing Center)
- Speaker at Homogenization of Winding Pack Properties for the Structural Analysis of Fusion Magnets
Alexandre LOUZGUITI (CEA)
- Speaker at [Plenary] The benefits of the analytical approach for the optimization of superconducting magnets from the early design stage
- Speaker at AC losses in JT-60SA magnets during commissioning: experimental analysis and simulations
Jiaqi Lu (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Analysis of Coupled Electromagnetic Thermal Effects of Scanning Magnet for SESRI
- Speaker at Design of a large aperture Canted Cosine Theta (CCT) combined function curved superconducting bending magnet
Jun Lu (NHMFL)
- Speaker at Microanalysis of Glidcop® conductor, an alumina particle dispersion strengthened copper, for ultrahigh field pulsed magnet applications
Linqing Luo (Lawrence Berkeley National Laboratory)
- Speaker at Distributed fiber optic sensing to identify locations of resistive transitions in REBCO conductors and magnets
Valery Lyssenko (FIAN)
- Speaker at Design of 6T superconducting solenoid system for spin polarization control at NICA collider
Yuanyuan Ma
- Speaker at Preliminary Design of Insulation System for Superconducting Conductor Testing Facility
Yuanzheng Ma
- Speaker at Comparative Study of HTS linear synchronous motor with different core and winding structures for electromagnetic launching
Guangtong Ma (Southwest Jiaotong University)
- Speaker at Design, fabrication and testing of a coated superconductor magnet for electrodynamic suspension
Jun Ma (College of Electrical and Information Engineering)
- Speaker at High performance switch design for HTS transformer rectifier type flux pump
Milan Majoros (The Ohio State University)
- Speaker at Dipole magnets wound using YBCO cables - FEM stability issues modeling
- Speaker at FEM modeling of superconducting whole body, actively shielded 7 T MRI magnets wound using Nb3Sn strands
- Speaker at Stability and current sharing in YBCO cables – impact of broken elements - FEM modeling
Franco Julio Mangiarotti (CERN)
- Speaker at Power Test of the First Two MQXFB Quadrupole Magnets Built at CERN for the HL-LHC Low-Beta Insertion
Maxim Marchevsky
- Speaker at Ultrasonic Waveguides for Quench Detection in HTS Magnets
Vittorio Marinozzi (FNAL)
- Speaker at Conceptual design optimization of a 20 T hybrid cos-theta dipole superconducting magnet for future High-Energy particle accelerators.
- Speaker at Quench protection of a large aperture 15 T Cable Test Facility Nb3Sn Magnet
William Marshall (National High Magnetic Field Laboratory)
- Speaker at Lap joint resistivity and crossover resistance of REBCO conductors and coils
Mónica MARTÍNEZ LÓPEZ (F4E)
- Speaker at Factory acceptance test and delivery of the first two poloidal field coils to ITER fusion facility
Carla Martins Jardim (Centro de Investigaciones Energéticas, MedioAmbientales y Tecnológicas)
- Speaker at Fabrication and Power Test of last MCBXFB Magnets
Takanobu Mato (Hokkaido University)
- Speaker at Mechanical stress simulation of REBCO tapes using particle methods
Kazane Matsumoto
- Speaker at Numerical Analysis of 2 MW Fully Superconducting Synchronous Motor for Electric Aircraft Considering AC Loss in Field Winding
Lorenzo Mauro (ASG Superconductors)
- Speaker at BSCCO geometrical and soldering optimisation for high current lead application
- Speaker at Low field MgB2 and NbTi fast ramped coils: temperature behaviours empirical comparison.
Enming Mei (IMPCAS)
- Speaker at DCT&CCT superconducting multiplets for HIAF-HFRS
Matthias Mentink (CERN)
- Speaker at Method of Manufacturing Fast Ramping Non-Insulated HTS Pancake Coils
Giuseppe Messina (ENEA)
- Speaker at Electromagnetic Analysis of DTT Central Solenoid and Poloidal Field coils
Marin Minamitani (Kansai University)
- Speaker at Study of Rotational Stability in the HTS Magnetic Bearing Rotor Incorporated the Secondary of the Induction Motor
Fumihito MISHIMA (Fukui University of Technology)
- Speaker at Development of novel magnetic separation for paramagnetic particles using the selection tube
Neil Mitchell
- Speaker at [Invited] Successes & Failures in Design Solutions During the 30 Year Life of ITER (and how we could have improved)
Hideaki Miura (MITSUBISHI ELECTRIC Corp.)
- Speaker at Study of the Basic Properties of Meter-class REBCO High-Temperature Superconducting Coils for MRI
Yuta Miyake (Okayama University)
- Speaker at Numerical Evaluation on Mechanical Behavior of No-insulation REBCO Pancake Coils in Skeleton Cyclotron
Yu Miyamoto (Waseda University)
- Speaker at Evaluation of operating characteristics of coils wound with no-insulation REBCO bundle conductor for SMES
Kohei Miyamoto (Okayama University)
- Speaker at Experimental Study on the Accuracy of the Proposed LFAC Method for Measuring the Contact Resistance of NI HTS Coils
Akihito Mizuno (Nagoya University)
- Speaker at Optimal operating conditions of YBa2Cu3Oy HTS diode with a PrBa2Cu3Oy buffer layer
Kota Mizushima (National Institutes for Quantum and Radiological Science and Technology)
- Speaker at Electromagnetic design of the superconducting magnet for a compact heavy-ion synchrotron
Luigi Morici (ENEA)
- Speaker at Primary quench detection analysis for DTT Central soledoid (CS) and polidal field coils (PF)
Taro Morita
- Speaker at Influence of Ti doping on the Nb3Sn layer formation for various Nb3Sn wire structure
Takanori Motoki (Aoyama Gakuin University)
- Speaker at Short-time fabrication and trapped field distributions of large REBCO melt-textured bulks made by Single-Direction Melt Growth method
Haruyuki Murakami (National Institutes for Quantum and Radiological Science and Te)
- Speaker at [Plenary] Overview of Construction and First Commissioning Results of JT-60SA Superconducting Magnets
Akira Murakami (Ichinoseki College)
- Speaker at Tensile properties of (Gd,Y,Er)BaCuO superconducting bulk materials fabricated by infiltration growth technique
Shogo MURAKAMI (Waseda University)
- Speaker at Energization waveform for reducing Screening Current-induced Magnetic Field in No-Insulation REBCO Coil Systems
Marco Musardo (Brookhaven National Laboratory)
- Speaker at Phasing Magnet for CSX-2 beamline at NSLS-II
Mtangi Mohamed Mussa (Department of Materials Science and Engineering, Korea University, Seoul, 02841, Korea)
- Speaker at Electrical Characteristics of a High-Temperature Superconducting Coil Insulated with Doped Smart Materials
Andrea Musso (University of Bologna)
- Speaker at Analysis of the Defect-Irrelevant behavior of a No-Insulation HTS pancake coil including multiple superconductive joints
- Speaker at Current and temperature distributions in HTS coils with and without insulation in a layer-wound configuration
Shogo Muto (Fujikura Ltd.)
- Speaker at Quench protection study of a large scale REBCO magnet with additional copper tapes
Luigi Muzzi (ENEA)
- Speaker at Engineering and Structural Assessment for the updated design of the DTT Central Solenoid
Cory Myers (Lawrence Berkeley National Lab)
- Speaker at Field Quality Measurements of High-Temperature Superconducting Canted Cosine Theta Accelerator Magnets
Yoh Nagasaki (Tohoku University)
- Speaker at Reinforcement Structure of HTS Magnet to Increase the Magnetic Moment for Space Application
Keisuke Naito (Okayama University)
- Speaker at Numerical Evaluation of Reinforcement Structure against Electromagnetic and Thermal Stresses in Stacked REBCO Pancake Coils
Tomoyuki Naito (Iwate University)
- Speaker at Trapped field properties of MgB2 bulks prepared via an in-situ infiltration-reaction process using refined boron powders
yuma nakada (Chiba Univ)
- Speaker at Improvement of excitation delay by multiple high temperature superconducting tapes in no-insulation coil
Yuki Nakai (Okayama University)
- Speaker at Numerical Evaluation on Quench Behavior of REBCO Coil System of Skeleton Cyclotron for Cancer Therapy
Tatsushi Nakamoto
- Speaker at Mechanical characterization of Glass Fiber Reinforced Polymers (GFRP) and resins submitted to ionizing radiations for future accelerator application
Taketsune Nakamura (Kyoto University)
- Speaker at Parametric study on starting method with fast torque response in high-temperature superconducting induction/synchronous motor
- Speaker at Robust and low-loss high temperature superconducting armature winding technology to realize a practical fully superconducting rotating machine: from the viewpoint of self-organizing design method and FFDS conductor technique
- Speaker at Temperature Dependence of Optimal Shape and DC Current Transport Characteristics of 3T Whole Body REBCO MRI Magnet
Kota Nakamura (Sophia University)
- Speaker at Levitation properties of magnetic attraction type levitation system having HTS bulk and HTS racetrack magnet
Seokho Nam (JH engineering Company Ltd.)
- Speaker at Design and Quench Analysis of a Cryogen-Free Superconducting Magnet for 170-GHz Gyrotron
Gi-Dong Nam (Changwon National University)
- Speaker at Design of a helium-liquid hydrogen based indirect cooling system for an HTS coil cooling
Kyohei Natsume (QST)
- Speaker at Thermal characteristics of JT-60SA thermal shield
Ui Nemoto (Waseda University)
- Speaker at Numerical evaluation of electromagnetic behavior of multi-stacked no-insulation REBCO coil system assuming applications to high-field whole-body MRIs and medical cyclotrons
Martina Neri (ASG Superconductor s.p.a.)
- Speaker at BSCCO geometrical and soldering optimisation for high current lead application
- Speaker at Low field MgB2 and NbTi fast ramped coils: temperature behaviours empirical comparison.
Thomas Nes (Twente Technical University (NL))
- Speaker at Cloverleaf dipole demonstrator magnet with 2-tape ReBCO stack conductor
Doan Nguyen (Los Alamos National Lab)
- Speaker at Redesign and rebuild of the Coils for the 60 T Controlled Waveform Magnet at the NHMFL
Dongsheng Ni (Institute of Modern Physics Chinese Academy of Sciences)
- Speaker at Development of a demountable joint for NUCLOTRON type cable
Daniel Nickel (Karlsruhe Institute of Technology (KIT))
- Speaker at Design and manufacturing of a KIT sample for a Quench Experiment on HTS Cable in Conduit Conductors
Lanxin Nie (State Key Laboratory of Advanced Electromagnetic Engineering and Technology (School of Electrical and Electronic Engineering, Huazhong University of Science and Technology))
- Speaker at Thermal Network Modeling for High-frequency Insulated Core Transformers
Yang Nie (North China Electric Power University)
- Speaker at Bending Characteristics of Cable-In-Conduit Conductor based on Quasi-Isotropic Strands
Gen Nishijima (National Institute for Materials Science)
- Speaker at Development of Bi-2223 magnet for magnetic refrigeration system
Chang Niu (Hunan University)
- Speaker at AC Loss Calculation on Stacked HTS YBCO Tapes Based on Magnetic Field Characteristic Parameters Analysis
- Speaker at Modelling and Investigation on the AC loss of the 2G YBCO tape influenced by High-order power harmonics
Rongmei Niu (National High Magnetic Field Lab.)
- Speaker at High electric conductivity and optimum strength in cold-drawn CuCrZr alloys at 295K and 77K
Jerzy Nogiec (Fermilab)
- Speaker at Designing a Magnetic Measurement Data Acquisition and Control System with Reuse in Mind: A Rotating Coil System Example
- Speaker at Software Architecture and Hardware Organization in Mu2e Solenoid Field Mapping System
So Noguchi (Hokkaido University)
- Speaker at An Optimal Configuration Method of Superconducting Magnet with Iron Shield using Model Order Reduction
Masazumi Noguchi (Tokyo Institute of Technology)
- Speaker at Study of refrigerant circulation system and cryofan for cooling high temperature superconducting coils.
Hyun Sung Noh (Department of Materials Science and Engineering, Korea University, Seoul,02841, Korea)
- Speaker at Persistent Current Switch with Diode Protection and Superconducting Joint for a 5 T NbTi NMR Magnet
- Speaker at Thermal-Quench Behavior of GdBCO Coils Wound with Grease Containing Various Fillers as Insulation Materials
Shinichi Nomura (Meiji University)
- Speaker at Operation Scenario of Mobile SMES for On-Site Eigenvalue Measurement of Electric Power System
Michael Novikov (Joint Institute for Nuclear Research)
- Speaker at Development of superconducting magnetic energy storage for the power system of the particle accelerators Booster and Nuclotron of NICA
- Speaker at Quadrupole Superconducting Model Magnet for Upgrade of the Nuclotron Synchrotron
Igor Novitski (FERMILAB)
- Speaker at Development of a 120-mm aperture Nb3Sn dipole coil with stress management
Tetsuhiro Obana (NIFS)
- Speaker at Electromagnetic-structural analysis of a superconducting magnet with active shielding for a rotating gantry
- Speaker at Study on the state prediction of the superconducting magnet system for a nuclear fusion experimental device by machine learning
Kodai Oda (Ibaraki-University)
- Speaker at Developments of a Pulse Kicker System for the Three-Dimensional Spiral Beam Injection of the J-PARC Muon g-2/EDM Experiment
Jun Ogawa (Niigata University)
- Speaker at Modeling of AC loss characteristics under electromagnetic conditions in High-temperature superconducting cable
Hiraku Ogino (National Institute of Advanced Industrial Science and Technolog)
- Speaker at Development of CaKFe4As4 bulks by spark plasma sintering method
Sangjun Oh (Korea Institute of Fusion Energy)
- Speaker at Dynamic Simulation on Flow Characteristics of KSTAR PF Magnet Cryogenic Network
masaki ohsugi (Fujikura Ltd.)
- Speaker at Low resistance soldered joint of REBCO coated conductors with novel Ag-dispersed structure
MASAYOSHI OHYA (Kwansei Gakuin University)
- Speaker at Numerical analysis on transient stability of large helical device conductor
Yuta Okade (Kyushu University)
- Speaker at Study of REBCO Trapezoidal Armature Windings for Superconducting Induction Motor
Yodai Okazaki
- Speaker at Research on combined use of magnetic refrigeration technology for refrigerant circulation type high temperature superconducting coil cooling system
Masao Okumura (Osaka University)
- Speaker at Removal of Iron Oxide Scale from Boiler Feed-water in Thermal Power Plant by Magnetic Separation　-Aggregation States of Oxygenated Treatment Scale-
Ivan Okunev (BINP SB RAS)
- Speaker at Magnets for Ion Transfer Line from the Booster to the Nuclotron for the NICA project
Jamal Olatunji (Victoria University of Wellington)
- Speaker at Modelling and mitigation of quench risk for a NI HTS MRI brain magnet
Yuki Omanyuda (Kyushu University)
- Speaker at Experimental Evaluation of Current Distribution in Three-Strand Transposed Parallel Conductors Composed of REBCO Superconducting Tapes
Junya Omura (Kagoshima University)
- Speaker at Verifying the method to estimate local critical currents in the HTS coil by means of Pick up coils
Yuta Onodera (Kyushu University)
- Speaker at Current- transport properties of HTS-FAIR conductor at variable temperatures in high magnetic field
Kozo Osamura (Research Institute for Applied Science)
- Speaker at Degradation Behavior due to Flatwise and Edgewise Bending of Critical Current of BSCCO Tapes
Yoshihiro Osawa (Okayama university)
- Speaker at Structure design on the 3-T HTS coil for desktop MRI magnet using the Distributed Genetic Algorithm method.
Maxim Osipov (NRNU MEPhI)
- Speaker at Characteristics of magnetic force interaction of СС-tape windings with a permanent magnet guideway.
Xianjin Ou
- Speaker at Quench Detection and Voltage Spikes Analysis of the FECR Half-scale Nb3Sn Superconducting Magnet
Toshinori Ozaki
- Speaker at Effect of 2 and 10 MeV Au-ion irradiation on superconducting properties in GdBa2Cu3Oy coated conductors
Evandro Paese (Universidade de Caxias do Sul - UCS)
- Speaker at Assessment of coil design and pulse unit parameters for the optimization in the electromagnetic forming process of metal sheet
Kévin Paillot (Univ. Grenoble Alpes, INSA Toulouse, Univ. Toulouse Paul Sabatier, EMFL, CNRS, LNCMI, France)
- Speaker at Energy efficiency of resistive high field magnets – the role of magnet technology and power supply operation
Mark Palmer (BNL)
- Speaker at [Plenary] Muon Colliders and Their Magnet Technology Needs
Alessandra Pampaloni (INFN Genova)
- Speaker at Mechanical Design of the Nb3Sn Cos-theta Short Model Dipole for the Future Circular Collider
yonglin pan (China Three Gorges University)
- Speaker at A Novel HTS Magnetic Field Modulation Type Magnetic Gear Hybrid Motor With Irregular Halbach Array
Yingzheng Pan (Lanzhou University)
- Speaker at Mechanical and electromechanical behavior of REBCO coated conductors under combined tensile-bending deformation
Victor Pantsyrny (Bochvar Institute)
- Speaker at Long Time Thermal Stability and Radiation Resistance of Nanostructured Microcomposite Wires Based on Cu-Nb Alloy
Enric Pardo (Slovak Academy of Sciences)
- Speaker at Modeling of screening currents in superconducting non-insulated REBCO magnets: fast and accurate 2D approach
Dongkeun Park (Massachusetts Institute of Technology)
- Speaker at Operation Results of a 23.5-T REBCO Magnet Prototype Towards a Tabletop Liquid-Helium-Free 1-GHz Microcoil NMR
Jeonghwan Park (Seoul National University)
- Speaker at Conduction Cooling Test of Short Period NI HTS Undulator at Different Opearating Temperature Ranges 20-77 K
- Speaker at Temperature Considered Active Feedback Control of No-Insulation HTS Magnet
Ismail Patel (Cambridge University)
- Speaker at MATLAB Implementation of Optimized HTS Transformer-Rectifier Flux Pump Using HTS Dynamic Voltage Switches
Vadim Pavlyuchenko (Budker Institute of Nuclear Physics)
- Speaker at Development of magnetic system for bending electron beam in industrial accelerator ILU-10
Xuan Peng (Hyper Tech Research Inc.)
- Speaker at Improving critical current in ternary APC Nb3Sn superconductors by using internal oxidation method
Shuhao Peng
- Speaker at Simulation and experimental validation of superconducting magnetic levitation suspension system
Xie Pengyang (Southwest Jiaotong University)
- Speaker at Numerical modelling and calculation of mechanical properties of HTS magnet wound with multi-thickness armored REBCO tapes
Kevin Pepitone (Uppsala University)
- Speaker at Design of a double aperture Canted-cosine-theta orbit corrector for the High Luminosity LHC
Juan Carlos Perez (CERN)
- Speaker at Construction and test of the enhanced Racetrack Model Coil, first CERN R&D magnet for the FCC
Carlo Petrone (CERN)
- Speaker at An Induction-Coil Measurement System for Normal- and Superconducting Solenoids
Valery Petrykin (SuperOx Japan)
- Speaker at Current review of the 2G-HTS wires production for high-field applications at SuperOx
Wei Pi (North China Electric Power University)
- Speaker at A Numerical Method for Simulating the Quench Behavior of Superconductors
- Speaker at Critical Current Analysis of a Self-shielding DC HTS Cable with a “Sandwich” Structure
- Speaker at Design and Simulation of a 150 kVA Single-Phase HTS Transformer with 1G/2G Hybrid HTS Tapes
Henryk Piekarz (Fermilab)
- Speaker at Record High Ramping Rates in HTS Based Superconducting Accelerator Magnet
Feng Piji (Southwest Jiaotong University)
- Speaker at Vertical Dynamic Response of Vehicle-bridge Coupled Systems in Superconducting Electrodynamic Suspension Train
Ian PONG (LBNL)
- Speaker at Procedural solutions for determining the temperature dependence of transport critical current in Nb3Sn superconducting wires using magnetization measurements
Amaury Porhiel
- Speaker at Innovative collaring concept for MQYY superconducting quadrupole magnets of HL-LHC Insertion Region
Oliver Portugall
- Speaker at Optimizing single-turn coils for scientific applications beyond 100T
Upendra Prasad (Institute For Plasma Research)
- Speaker at Fabrication and characterization of BSCCO-2223 tape based compact coils
Marco Prioli (Università degli Studi e INFN Milano (IT))
- Speaker at Advanced electrical quality assurance methods for the series production of the superconducting coils of the HL-LHC high order corrector magnets
Pierre Pugnat (Lab. des Champs Magnet. Intenses (FR))
- Speaker at [Invited] 43+T Grenoble Hybrid Magnet: From final Assembly to Commissioning of the Superconducting Outsert
Dongyi Qin (Tokyo University of Agriculture and Technology)
- Speaker at Critical current and nano-structural properties of K-doped BaFe$_2$As$_2$ epitaxial thin films by molecular beam epitaxy
Qingquan Qiu (Institute of Electrical Engineering, Chinese Academy of Science)
- Speaker at Investigation of HTS Power Devices Cooled by LN2/CF4 Mixture
Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences and Ganjiang Innovation Academy, Chinese Academy of Sciences)
- Speaker at An Improved Passive Shimming Strategy for the Unsaturated Magnetization Problem in the Low-field Superconducting MRI Magnet
Lionel Quettier
- Speaker at [Invited] First images of the Iseult Whole Body 11.7 T MRI
Adolfo Quiroz (Universidad Tecnológica de Xicotepec de Juárez)
- Speaker at Effect of rare earth substitution on the structural, electrical and magnetic properties on the piezoelectric A1-xSrxTiO3 system
Roger Jon Rabehl (Fermi National Accelerator Lab. (US))
- Speaker at Fermilab’s Horizontal Test Stand Cryogenic System Upgrade and Commissioning
Emmanuele Ravaioli (CERN)
- Speaker at Simulation of Quench Transients in Self-Protecting Magnets with a 3D Semi-Implicit Finite-Difference Method
- Speaker at STEAM Software Framework to Simulate Transients in Accelerator Magnets and Circuits
Christopher Reis (Lawrence Berkeley National Laboratory)
- Speaker at Quench detection and protection of high-temperature superconducting magnets: The case of a Bi-2212 Rutherford cable canted-cosine-theta dipole magnet
Tianci Ren (Southwest Jiaotong University)
- Speaker at Vibration Characteristics of HTS Maglev System Levitated Above a Halbach Permanent Magnet Track
Philipp Revilak (Bilfinger Noell GmbH)
- Speaker at Manufacture of the Proton Electron Radiation Channel (PERC) installed at the Research Neutron Source FRM II
Kseniia Riabchenko
- Speaker at 3D modeling of the decapole corrector for the FAIR project
Rebecca Riccioli (CEA)
- Speaker at Comparative electromechanical study of different Nb3Sn CICC designs for tokamaks with FE simulations
James Rice (Victoria University of Wellington)
- Speaker at Design of a Bifilar HTS Switching Element Using Iron-Core Field Coils
Nicolo' Riva (EPFL - EPF Lausanne)
- Speaker at Modeling stabilizer and superconducting inhomogeneities of commercial REBCO tapes with a 1-D electro-thermal model
Etienne Rochepault (Université Paris-Saclay (FR))
- Speaker at 20 T Hybrid Nb3Sn-HTS Block-coil Design for a Future Particle Collider
- Speaker at 3D Conceptual Design of R2D2, the Research Racetrack Dipole Demonstrator
JACOB ROCHESTER (The Ohio State University)
- Speaker at Flux Creep in Bi:2212 Rutherford Cables for Particle Accelerator Applications
- Speaker at Increased Quench Energy Threshold in Nb3Sn Strands with High Heat Capacity
Dimitris Rodopoulos (University of Patras)
- Speaker at A FEM/BEM scalar potential formulation for 3D nonlinear magnetostatic analysis in superconducting accelerator magnets, implemented in PITHIA-EM software
- Speaker at Nonlinear magnetic field analysis in superconducting accelerator magnets via a new FPM/BEM scheme, implemented in PITHIA-EM software
Gherardo Romanelli (ENEA)
- Speaker at [Plenary] Tokamaking, some reflections and afterthoughts
- Speaker at Design and structural assessment overview of the DTT TFC system
Lucio Rossi (Università degli Studi e INFN Milano (IT))
- Speaker at Preliminary study of 4 T superconducting dipoles for a light rotating gantry for ion-therapy
Jose Luis Rudeiros Fernandez
- Speaker at Assembly and mechanical analysis of the Canted-Cosine-Theta subscale magnets
- Speaker at Engineering design of a large aperture 15 T cable test facility dipole magnet
- Speaker at Mechanical and thermal analysis of an HTS superconducting magnet for an achromatic gantry for proton therapy
Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))
- Speaker at Magnetization and Hysteresis Losses in HTS Coated Conductors in Magnetic Field of Various Orientation
Aleksandr Rybakov (Fian)
- Speaker at Design of 6T superconducting solenoid system for spin polarization control at NICA collider
Yunyeol Ryu (Department of Materials Science and Engineering, Korea University, Seoul, 02841, Korea)
- Speaker at Effects of Friction Force on the Stress-Strain Characteristics of a High-Temperature Superconducting Coil Co-Wound Using Intentionally Scratched Stainless Steel and GdBCO Tape
Takeru Sakurai (QST)
- Speaker at Evaluation of mass production results of cryogenic structural stainless steels for ITER toroidal field coil
Erica Salazar (Massachusetts Institute of Technology)
- Speaker at Quench Dynamics testing and 3D modeling of VIPER HTS Cable
Xabier Sarasola (EPFL)
- Speaker at Progress on the Design of the 15 T Magnet of the EDIPO Test Facility
Hiromasa Sasa
- Speaker at Thermal-Electromagnetic Coupled Analysis Considering AC Losses in REBCO Windings at 65 K of 10 MW Fully-Superconducting Synchronous Generators for Electric Aircraft
Rempei Sasada (Aoyama Gakuin University)
- Speaker at Fabrication of all c-grown RE123 melt-textured bulks with homogeneous trapping field distributions using Single-Direction Melt Growth method
Ken-ichi Sasaki (KEK)
- Speaker at [Invited] Development of precise shimming technique with materials having low saturation magnetization
- Speaker at Development of magneitc field mapping system for MuSEUM experiement with high precision using CW-NMR probes
Laura Savoldi (Politecnico di Torino)
- Speaker at Evaluation of the thermal performance of the SC Feeders for the magnetic system of the Divertor Tokamak Test facility
Thierry Schild (Iter)
- Speaker at Start of the ITER Central Solenoid Assembly
Pierre Schnizer
- Speaker at [Invited] Magnets for low Emittance Machines: An Overview
Kamil Sedlak (EPFL Lausanne)
- Speaker at Measurements of AC loss evolution in ITER TF Conductors
Stefano Sgobba (CERN)
- Speaker at Examination and Characterization of Physical and Mechanical Properties of the ITER Central Solenoid Module Coils
Adil Shah (University of Cambridge)
- Speaker at A Novel Switch Design for Compact HTS Flux Pumps
QING SHAO
- Speaker at Multiphysics field topology optimization design of heat conduction structure of high-temperature superconducting magnets
Liangjun Shao (Tsinghua University)
- Speaker at Design of a full Superconducting 35 T Magnet with a 20 T REBCO Insert
Jiannan Shao (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Speaker at Semiellipse Coil Pair with Eccentric Windings for Improved Intracranial Induced Electrical Field in Transcranial Magnetic Stimulation
Shifeng Shen (Naval University of Engineering)
- Speaker at Electromagnetic Design of a Novel HTS Linear Synchronous Motor for Electromagnetic Launching
Tengming Shen (Lawrence Berkeley National Lab)
- Speaker at First canted cosine theta Bi-2212 accelerator magnets: Fabrication, performance, and prospects
Chuang Shen (IHEP)
- Speaker at Design and optimization of the superconducting quadrupole magnet Q1a in CEPC interaction region
Jing Shi (Huazhong University of Science and Technology)
- Speaker at The influence of SMES magnet operation parameters on voltage distribution characteristic
Yujun Shi (University of Macau)
- Speaker at A Dual-Stator HTS Modular Linear Vernier Motor for Long Stroke Applications
Nishijima Shigehiro (Fukui University of Technology)
- Speaker at Separation of Microplastics from Sea Water by Means of Electromagnetic Force
Mao Shigemasa (Kyoto University)
- Speaker at Coupling time constant measurements and analyses of spiral copper-plated multifilament coated conductors
Ryohei Shimada (Sophia University)
- Speaker at Experimental study on quench protection method for HTS coil that uses Cu tape co-wound with HTS tape
Hirotaka Shimizu (KEK)
- Speaker at Study on Conduction Cooling of Superconducting Magnets for the ILC Main Linac
Jun-ichi Shimoyama (Aoyama Gakuin University)
- Speaker at Potential of Superconducting Joints Connecting Bi2223 Tapes
Kyung-Hun Shin (Chonnam National University)
- Speaker at Comparative Study of MW class Superconducting Machines according to Shielding and Electromagnetic Structures Based on Analytical Method
Motoki Shinden (Iwate University)
- Speaker at Pulsed field magnetization of GdBaCuO superconducting bulks with high magnetization efficiency using a split type coil with a soft iron yoke
- Speaker at The influence of local heat generation in a REBaCuO ring bulk with large bore on mechanical fracture during pulsed-field magnetization
Kodai SHIRAI (Waseda University)
- Speaker at Numerical evaluation of screening current-induced magnetic field in HTS coil system of Skelton Cyclotron for targeted alpha-particle therapy
Yuko Shiroyanagi (Argonne National Laboratory)
- Speaker at A preliminary cryogenic performance test of the 4.8-m-long cryostat for superconducting undulators
Konstantin Shtro (Budker Institute of Nuclear Physics)
- Speaker at Combined method of mapping fields in pulsed bending magnets
Damien Simon
- Speaker at Test Results of the MQYYM: a 90 mm NbTi quadrupole magnet option for HL-LHC
Shuvay Singh (CERN)
- Speaker at CERN North Area Multi-Purpose Superconducting Magnet Facility
Vitor Soares (Brazilian Center for Research in Materials and Energy)
- Speaker at Status Report of Sirius Delta Undulator
Yusuke Sogabe (Kyoto University)
- Speaker at Development of large-scale numerical electromagnetic field analysis model for SCSC cables
Myung-Hwan Sohn (Korea Electrotechnology Research Institute)
- Speaker at Stability of a metal insulated 2G HTS coil under the external ac field
Vyacheslav Solovyov (Brookhaven Technology Group)
- Speaker at Performance of a test coil wound from defect-tolerant second generation cable
Natthawirot Somjaijaroen (Kyushu University)
- Speaker at Automatic Detection of Local Obstacles in a Long Length RE-123 Coated Conductor by Deep Learning Based Image Classification in Reel-to-Reel Magnetic Microscopy
MinHui Song (Hefei Institutes of Physical Science, Chinese Academy of Scienc)
- Speaker at Design and study of a new type of series active filter for the 10MW-level high power and high stability DC power supply
PENG SONG (Tsinghua University)
- Speaker at Performance analysis and evaluation of a hundred-kW HTS dynamic synchronous condenser prototype
Jungbin Song (LNCMI-CNRS)
- Speaker at Metal-as-Insulation HTS Insert for Very-High-Field Magnet: A Test Report after Repairment
Honghai Song (Stony Brook University)
- Speaker at New Methods to Reduce Fast-Ramping AC loss in High Temperature Superconductors Coils at High Currents of 500 A – 800 A
Yunxing Song (Huazhong University of Science and Technology)
- Speaker at 25T/52mm warm-bore All YBCO superconducting magnet designed for High-frequency Gyrotrons
Shogo Sonoda (Sophia university)
- Speaker at Investigation of Transient Response caused by Power Supply on JT-60SA Central Solenoid
Dmitry Sotnikov (Tampere University)
- Speaker at Choice of 2G HTS tape for magnet design according to quench protection requirements.
Marco Statera (INFN Milano - LASA)
- Speaker at The HL-LHC Superferric High Order Corrector Magnets: Series Production and Powering Tests Status
Jens Steckert (CERN)
- Speaker at Application of the Universal Quench Detection System to the Protection of the High-Luminosity LHC Magnets at CERN
Jillian Stern (Tufts University)
- Speaker at Developing a Vacuum Pressure Impregnation Procedure for CORC® Wires
Stoyan Stoynev (FNAL (US))
- Speaker at Analysis of quench data and performance of MDPCT1 – the 15 T Nb3Sn dipole demonstrator
- Speaker at Flex-PCB quench antenna developments at FNAL
Thomas Strauss (FNAL)
- Speaker at ITER Outer Vessel Steady-State magnetic sensor calibration
- Speaker at US-HiLumi Accelerator Upgrade Project Pre-series Cryo-Assembly 01 Production and First Results
Yu Suetomi (RIKEN)
- Speaker at Self-protecting behavior of an intra-Layer No-Insulation (LNI) REBCO coil under an LTS outer coil’s quench
Tetsuro Sueyoshi (Kyushu Sangyo University)
- Speaker at Modification of critical current density properties in high-Tc superconductors by tuning columnar defect morphologies in different directions
Michinaka Sugano
- Speaker at Test result of a full-scale prototype of beam separation dipole magnet for the High-Luminosity LHC upgrade
Moe Sugita (JAEA)
- Speaker at Effect on temperature dependence for long-term stable control of the magnetic field at sub-ppm using superconducting magnet for MRI
Kei SUGITA (GSI)
- Speaker at Truncated-Cosine-Theta Design for High Field Septum Magnets
Naoyuki Sumi
- Speaker at Construction status of the superconducting magnet system for the COMET experiment
Masashi Sumida (Kyushu University)
- Speaker at Design Study of 3φ-10 MVA-6.9/1.0 kV REBCO Superconducting Transformers with Lightweight and Current-Limiting Function for an E-aircraft Propulsion System
Ziyuan Sun (NCEPU)
- Speaker at Bending and Twisting Properties of Quasi-isotropic Superconducting Strand at Liquid Helium Temperatures Based on Laminate Theory
- Speaker at Critical Current Analysis of a Self-shielding DC HTS Cable with a “Sandwich” Structure
- Speaker at Design and Simulation of a 150 kVA Single-Phase HTS Transformer with 1G/2G Hybrid HTS Tapes
Wanshuo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Fabrication and Characteristics of HTS Racetrack Pancake Coils after Impregnation Process Using Various Materials
- Speaker at Fabrication of Racetrack Type Double-pancake Coils Using 2G Tapes
- Speaker at Formation of Nb3sn after Different Mechanical Alloying Methods
- Speaker at The Fabrication Technology and Test Results of the NbTi Superconducting Racetrack Magnet
Yueming Sun (Robinson Research Institute, Victoria University of Wellington)
- Speaker at Role of asymmetric critical current on magnetization loss characteristics of REBCO coated conductors at various temperatures
Hongbo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences)
- Speaker at Optimal Design for Permanent Magnet Distribution of the Tip of Flexible Endoscope Driven by Magnetic Navigation
Chenzhen Sun (Southwest Jiaotong University, Chengdu, China)
- Speaker at Influence of the Stator Substrate Magnetism on the Charging Performance of Dynamo-type HTS Flux Pump
Kento Suzuki
- Speaker at Magnetic measurements of a full-scale prototype of the HL-LHC beam separation dipole
Victor Sytnikov (R&D Center @ Federal Grid Company)
- Speaker at Development of HTS conductor for the central solenoid of compact fusion reactor TRT
Kohki Takahashi (Tohoku University)
- Speaker at Hoop stress test of four-stacked two-ply REBCO pancake coils
Keita Takahashi (Iwate University)
- Speaker at Validation of a high-gradient trapped field magnet with an open bore providing a quasi-microgravity space on Earth and its application to magnetic levitation
Masato Takahashi (RIKEN)
- Speaker at First NMR Relaxometry using Outer Field of Single-sided HTS Bulk Magnet activated by Pulsed Field
Keisuke Takahashi (Sophia University (Graduate school))
- Speaker at Effects of thermal cycle and winding tension on contact resistivity of an intra-Layer No-Insulation (LNI) REBCO coil
Hitoshi Takahashi (Institute of Particle and Nuclear Studies, High Energy Accelerator Research Organization)
- Speaker at Development of Radiation-Resistant Warm Magnets using Cyanate Ester Resin
Teruou Takayama (Yamagata University)
- Speaker at Numerical Optimization of Electromagnet Current Distribution in Superconducting Linear Acceleration System
shigeki takayama (Toshiba Energy Systems & Solutions Corporation)
- Speaker at Rotating gantry for heavy ion therapy mounted with superconducting bending and focusing magnets
Tomohiro Takayanagi (JAEA/J-PARC)
- Speaker at Evaluation of eddy currents dependent on excitation pattern in design of pulse electromagnets.
Yasuaki Takeda (NIMS)
- Speaker at [Plenary] HTS Superconducting Joint for Persistent Current Mode Magnets
- Speaker at Development of a persistent-mode 400 MHz (9.39 T) LTS/Bi2223 NMR magnet with a Bi2223 superconducting joint
Mikito Takenaka (Chiba university)
- Speaker at Thermal stability against local critical current degradation in an HTS pancake coil wound with an insulated conductor composed of no-insulated multiple tapes
Alex Hitoshi Takinami (Kansai University)
- Speaker at Improvement of the propulsion force by the excitation principle of the propulsion coil in the permanent magnet-HTS hybrid Magnetically levitated transport system
Hitoshi Tamura (National Institute for Fusion Science)
- Speaker at Seismic analysis of magnet systems in helical fusion reactors designed with topology optimization
Toshiya Tanabe (Brookhaven National Laboratory)
- Speaker at Construction of Cryogen-Free 4.3T Superconducting Wiggler for NSLS-II Ring
Hideki Tanaka (Hitachi, Ltd.)
- Speaker at Measurement of irreversible external-compressive strain and minimization of reversible bending radius on MgB2 multifilament wire
Rika Tanaka
- Speaker at Influence of premix condition on the microstructure and trapped field properties of MgB2 bulk magnets by Mg Vapor Transportation (MVT) method
Yinghao Tang (Huazhong University of Science and Technology)
- Speaker at Design of Pulsed Magnet for Adjusting the Residual Stress Field in Large-size Aluminum Alloy Rings
weizhao tang (China Three Gorges University)
- Speaker at A Double-Stator Single-Rotor Field Modulated Motor with HTS Bulks
Hiroyasu Taniguchi (Osaka Alloying Works, Co., Ltd.)
- Speaker at Unique and Novel High Tin Bronze and Nb3Sn Multifilamentary Wires
Simon TARDIEU (Laboratoire National des Champs Magnétiques Intenses, EMFL, CNRS-INSA-UGA-UPS)
- Speaker at Silver nanowires - copper composite wires for non-destructive pulsed fields : importance of avoiding the formation of a silver/copper alloy relative to the electrical resistivity and the tensile strength
Ryo Teranishi (Kyushu Univ.)
- Speaker at Investigation of the formation mechanism of a-axis oriented grains in GdBa2Cu3Oy coated conductors deposited by pulsed laser deposition
Yutaka Terao (University of Tokyo)
- Speaker at AC loss measurement of MgB2 superconducting coils under rotating magnetic field
Jeroen ter Harmsel (University of Twente)
- Speaker at Feasibility of different cryogenic systems for ReBCO coils based high-dynamic superconducting actuators
Reed Teyber (Lawrence Berkeley National Laboratory)
- Speaker at Progress Towards Hall Sensor-Based Quench Detection in CORC® Cables
Pierre Alexandre Thonet (CERN)
- Speaker at Design and Manufacture of two High Gradient Quadrupoles based on Permanent Magnets for the Antiproton Decelerator
- Speaker at Design, Manufacture and Measurement of three Permanent Magnet Dipoles for FASER Experiment
Binyi Tian
- Speaker at Study on thermal stability of transformer under external thermal disturbance
Xiaoyang Tian (HKU)
- Speaker at Multi-Input, Long-Distance, HTS-Based Wireless Charging System for Undersea Sensor Networks
Ezio Todesco (CERN)
- Speaker at [Invited] Lessons learnt in HL-LHC interaction region superconducting magnets: two case studies
- Speaker at Performance of a MQXF Nb3Sn Quadrupole Under Different Stress Level
Shinnosuke Tokuta (Tokyo University of Agriculture and Technology)
- Speaker at Trapped Field Characteristics of K-doped Ba122 Polycrystalline Bulks Synthesized by Spark Plasma Sintering
Goncalo Tomas (University of Twente)
- Speaker at [Invited] Assembly and Test of the world’s first conduction-cooled NbTi Magnet System for Magnetic Density Separation
Giordano Tomassetti (ENEA)
- Speaker at DEMO fusion reactor Toroidal Field coil optimized layer-wound design
Takuma Tomihisa (Aoyama Gakuin University)
- Speaker at Physical properties of all c-grown Gd123 bulks starting from various metal compositions
Masaru Tomita (Railway Technical Research Institute)
- Speaker at [Plenary] Magnet Technology for Train
Yujin Tong (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at An electro-thermal coupling model of quench protection using nonlinear quench-back for superconducting magnets
- Speaker at Numerical investigation of thermoelastic coupling behaviors of stacks of high temperature superconductor during a quench
Vince Toplosky (Florida State University)
- Speaker at Mechanical and thermal properties of glass fiber-filled thermos-plastic materials for magnet and cryogenic applications
Fernando Toral (Centro de Investigaciones Energéti cas Medioambientales y Tecno)
- Speaker at Protection strategy and quench study of MCBXF magnets
Yuto Torii (Kyoto University)
- Speaker at Development of quench analysis model for single copper–plated multifilament coated conductor
Alexandre Torre (CEA)
- Speaker at Review of experimental results and parameters for evaluation of AC losses of the ITER conductors
Frederic Trillaud (Instituto de Ingeniería, Universidad Nacional Autónoma de México)
- Speaker at Magnetic alignment and mechanical analysis of superconducting bending section for proton therapy
Ulf Trociewitz (NHMFL)
- Speaker at Bi-2212 Coil Technology
Yuji Tsuchiya (Nagoya Univ.)
- Speaker at Magnetization Relaxation by Shielding Current in Commercial REBCO Tapes
Kyoka Tsuyoshi (Waseda University)
- Speaker at Numerical evaluation of transient thermal stability of no-insulation pancake coil wound with REBCO coated conductor with some defects
KEITA TSUZUKI (National Institute of Technology, Toyota College)
- Speaker at Enhancement of magnetic flux distribution using roundly stacked-HTS tape
Daniele Turrioni (FNAL (US))
- Speaker at [Invited] Stability of Nb3Sn Superconducting Planar Undulator for ANL Advanced Photon Source
Hiroshi Ueda (Okayama University)
- Speaker at Deformation Analysis of no-insulation REBCO coils considering turn-to-turn contact configuration
Davide Uglietti
- Speaker at Analysis of AC losses in coated conductor stack cables for fusion magnets
tatsuro uto (Toshiba Energy Systems & Solutions Corporation)
- Speaker at Quench Protection Test Results of an HTS Model Magnet for MRI Systems Equipped with Electrically Conductive Epoxy Resin
Hiroyasu Utoh (National Institutes for Quantum and Radiological Science and Te)
- Speaker at Design study of superconducting TF coil concept with rectangular conductor layer winding with high manufacturability and insulation reliability for JA DEMO
Anvar V A (University Of Twente)
- Speaker at [Invited] CORC® cables with superior tensile strain performance : FEM and experiments
Giorgio Vallone (Lawrence Berkeley National Lab. (US))
- Speaker at Magneto-Mechanical Optimization of Cross-sections for cos $\theta$ Accelerator Magnets
- Speaker at Novel Insulation Designs for Nb<sub>3</sub>Sn Rutherford Cables for Particle Accelerator Magnets
- Speaker at Numerical Modelling of the Interfacial Debonding in Superconducting Magnets
Danko van der Laan (Advanced Conductor Technologies)
- Speaker at [Invited] Development of high-strength CORC® conductors with record-breaking irreversible axial tensile strain limit exceeding 7 %
Jeroen van Nugteren (LittleBeast)
- Speaker at Numerical Modelling of AC loss in large HTS Coils
- Speaker at Transient Electro-Magnetic and Thermal Simulation of HTS Non-Insulated Coils
Carlos Roberto Vargas-Llanos (Karlsruhe Institute of Technology (KIT))
- Speaker at T-A Formulation for Modelling and AC Loss Reduction Studies in a Superconducting Synchronous Generator for a 10 MW Wind Turbine
Gueorgui Velev (FNAL)
- Speaker at Current Status of the Facility for High Field Cable Testing at Fermilab
Sriharsha Venuturumilli (Victoria University of Wellington)
- Speaker at Variable inductance observed in the HTS non-insulation (NI) coils
Svetlana Veselova (NRNU MEPhI)
- Speaker at Investigations of stability of the second generation HTS composites under of current loads at various regimes
Julien Vialle (Institut Néel CNRS)
- Speaker at [Invited] Preliminary tests 12 T REBCO isolated solenoid magnet used as compact 1 MJ SMES.
Alan Vianna (CNPEM)
- Speaker at Conceptual Design of a C-shaped 6.4 T Superconducting Dipole Magnet
Sofia Viarengo (MAHTEP Group, Dipartimento Energia "Galileo Ferraris", Politecnico di Torino, )
- Speaker at Current distribution modeling in the open-source OPENSC2 tool for the multi-physics analysis of HTS and LTS superconducting cables
Jens Völker (Helmholtz Zentrum Berlin)
- Speaker at Magnet development for the BESSYIII multi bend achromat
Antonios Vouris (Fermilab)
- Speaker at Fabrication of the Fermilab Pre-Series Cold Mass for the HL-LHC Accelerator Upgrade Project
Vitaly Vysotsky (Russian Scientific R&D Cable Institute)
- Speaker at Conceptual design of the mobile cryomagnets for novel microwave technologies
Yutaro Wakutani (Tokai university)
- Speaker at Mechanical properties and strain effect of various Nb3Al superconducting wires
Wolfgang Walter (Bilfinger Noell GmbH)
- Speaker at Industrial production of superconducting magnets for the FAIR SIS100 accelerator
Ruiqi Wang (North China Electric Power University)
- Speaker at Critical Current Analysis of a Self-shielding DC HTS Cable with a “Sandwich” Structure
- Speaker at Design and Simulation of a 150 kVA Single-Phase HTS Transformer with 1G/2G Hybrid HTS Tapes
- Speaker at Numerical Study on AC Loss in Quasi-Isotropic Superconducting Strand at Liquid Helium Temperatures
Jiawen Wang (North China Electric Power University)
- Speaker at Electromagnetic Characteristics of a Bitter-like HTS Magnet Excited by Flux Pump with Thermal Switch
xu dong Wang (Institute of Modern Physics. Chinese Academy of Sciences)
- Speaker at Cryostat for HECRAL Superconducting Magnet
Xue Wang
- Speaker at Magnetothermal Coupling Analysis of Claw Pole Machine using Combined Magnetic and Thermal Network Method
Lishi Wang (Institute of Modern Physics， Chinese Academy of Sciences)
- Speaker at The study on the quench helium release process of HFRS superconducting magnet
Chuan Wang
- Speaker at Fabrication and Test of a 1:4 Scaled HTS Coil for the Defocusing Magnet of a 2 GeV FFAG Accelerator
Yaohui Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Design and Test of a Bended Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System
- Speaker at Design of a 14T cryogen-free physical property measurement system magnet
- Speaker at Design, fabrication and test of a 300MHz conduction-cooled NMR superconducting magnet
Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at A method to reduce the influence of manufacturing error on magnetic field homogeneity in NMR magnets
- Speaker at An Improved Passive Shimming Strategy for the Unsaturated Magnetization Problem in the Low-field Superconducting MRI Magnet
- Speaker at Analysis of dynamic thermal and mechanical behaviors of HTS magnet for high-speed superconducting maglev
- Speaker at Analysis of electromagnetic characteristics of a novel no-insulation HTS coil with stainless steel tape wrapped around the outer layer of the coil
- Speaker at Design and experiment of the conduction cooled superconducting magnet for crystal growth application
- Speaker at Design and Test of a Bended Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System
- Speaker at Design of a 14T cryogen-free physical property measurement system magnet
- Speaker at Design, fabrication and test of a 300MHz conduction-cooled NMR superconducting magnet
- Speaker at Fabrication and Characteristics of HTS Racetrack Pancake Coils after Impregnation Process Using Various Materials
- Speaker at Fabrication of Racetrack Type Double-pancake Coils Using 2G Tapes
- Speaker at Formation of Nb3sn after Different Mechanical Alloying Methods
- Speaker at Optimal Design for Permanent Magnet Distribution of the Tip of Flexible Endoscope Driven by Magnetic Navigation
- Speaker at Quench Analysis of the 9.4-T Whole-Body MRI Superconducting Magnet
- Speaker at The Calculation of Electromagnetic Force In Crystallizer About Using The High-temperature Superconducting Electromagnetic Stirring Device
- Speaker at The Calculation of The Heating Efficiency About Using The High-temperature Superconducting Induction Heating Device To Heat The Medium and Low-carbon Steel and Alloy Steel
- Speaker at The Fabrication Technology and Test Results of the NbTi Superconducting Racetrack Magnet
Zixin Wang (Huaiyin Institute of Technology)
- Speaker at Levitation characteristics analysis of a novel bearingless switched reluctance motor
- Speaker at Research on universal mathematical model and design method of homopolar hybrid magnetic bearing
- Speaker at Suspension characteristics Analysis on Three-degree-of-freedom Bearingless Switched Reluctance Motor
- Speaker at Suspension Force Analysis on 4-pole Radial Hybrid Magnetic Bearing with Independent Magnetic Circuits
Kangshuai Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Analysis of electromagnetic characteristics of a novel no-insulation HTS coil with stainless steel tape wrapped around the outer layer of the coil
Cong Wang (Institute of Electrical Engineering, Chinese Academy of Sciences and Ganjiang Innovation Academy, Chinese Academy of Sciences)
- Speaker at The Calculation of Electromagnetic Force In Crystallizer About Using The High-temperature Superconducting Electromagnetic Stirring Device
- Speaker at The Calculation of The Heating Efficiency About Using The High-temperature Superconducting Induction Heating Device To Heat The Medium and Low-carbon Steel and Alloy Steel
Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Analysis of dynamic thermal and mechanical behaviors of HTS magnet for high-speed superconducting maglev
yinshun wang (North china electric power university)
- Speaker at A Numerical Method for Simulating the Quench Behavior of Superconductors
- Speaker at Influence of Dynamic Resistance on Current Distribution of HTS Cable Conductor for Feeder lines and Large Scale Magnet
Xianwei Wang
- Speaker at The pre-compression study for CFETR central solenoid model coil
Weijun Wang (Institute of Plasma Physics Chinese Academy of Sciences)
- Speaker at Conceptual design of CRAFT TF coil heat treatment
Xueliang Wang (Shanghai Jiao Tong University)
- Speaker at The Study on Excitation Loss of NI Coil for TF Magnets
Li Wang (Southwest Jiaotong University)
- Speaker at Dynamic Response of HTS Pinning Maglev System Under High Frequency Excitation
keyang wang (University of Twente)
- Speaker at Axial and transverse loading model of CORC® cable considering initial contact from cabling process
Teng Wang (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Numerical Model Development for CFETR CSMC Quench Detection System
- Speaker at Processing of the quench detection signals for CS model coil of CFETR
Xiaorong Wang (Lawrence Berkeley National Laboratory)
- Speaker at [Invited] A subscale canted cosθ dipole magnet using high-temperature superconducting STAR™ wires
- Speaker at Field quality of the 4.5 m long MQXFA pre-series magnets for the Hi-Lumi LHC Upgrade as observed during magnet assembly
- Speaker at Network model for REBCO pancake coils with heat transfer
Xudong Wang (High Energy Accelerator Research Organization)
- Speaker at Quench Study on REBCO Coil for a HTS Sextupole Magnet
Mingyang Wang (Shanghai Jiao Tong University)
- Speaker at Feasibility Study on CCT Magnet Design based on Narrow-Stacked HTS wire
Jian Wang (Huazhong University of Science and Technology (HUST))
- Speaker at Thermal-structural analyses on magnetic structure of the CPMU prototype in SSRF
Shuang Wang (Huazhong University of Science and Technology)
- Speaker at Influence of Stainless Steel Shell on the 100 T Pulsed Magnet
Pengfei Wang
- Speaker at The research on the thermal deformation of Cu-Nb composites
Juan Wang
- Speaker at Investigation of a novel transposed superconducting cable using REBCO coated conductors
Tomonori Watanabe (Chubu.Electric.Power Co., Inc.)
- Speaker at Mechanical strength evaluation of Yoroi-coil structured non-circular REBCO pancake coil in high magnetic field
Zoe Webb-Mack (Lawrence Berkeley National Laboratory)
- Speaker at Network model for REBCO pancake coils with heat transfer
Yanqun Wei (Institute of Modern Physics, Chinese Academy Sciences)
- Speaker at Optimization design and development of septum magnet
Shaoqing Wei (Institute of High Energy Physics)
- Speaker at Design and Development of Curved CCT Dipole Magnets for a Proton Therapy Gantry
Jiafu Wei (Sichuan University)
- Speaker at Improve the Central Magnetic Field of an HTS Magnet with Multi Linear-Motor Flux Pumps Based on Genetic Algorithm
Haigening Wei (University of Cambridge)
- Speaker at Numerical Modeling for Electrical Machines with Superconducting Windings using H-A formulation
Fei Wei (High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei,China)
- Speaker at Design of a new type of power supply similar to flat-top pulsed high magnetic fields
Jeremy Weiss (Advanced Conductor Technologies and University of Colorado, Boulder)
- Speaker at Successful demonstration of the first CORC® cable insert solenoid in 14 T background magnetic field operating at currents exceeding 4 kA, current densities of over 250 A/mm2, and 275 MPa source (JBR) stress
Xing hao Wen (ASIPP)
- Speaker at Thermal Analysis of Toroidal Field Coil of EAST During Plasma Discharges
Xue Wenbo (SJTU)
- Speaker at Comparison between T-A formulation and uniform current assumption for the critical current calculation of high temperature superconductor ReBCO coils
- Speaker at Magnetization Loss of no-insulation high temperature superconductor coil exposed to background fields
han wenjie (Huazhong University of Science and Technology)
- Speaker at Design and test of a rotating magnetic field measurement system based on PCB technique
Tiemo Winkler (GSI Helmholtzzentrum für Schwerionenforschung GmbH )
- Speaker at SIS100 superconducting magnet series production
Mariusz Wozniak (CERN)
- Speaker at Quench Behaviour of Prototype HL-LHC Dipole Canted Cos-Theta Orbit Corrector Nb-Ti Magnet
- Speaker at Quench Protection of the HL-LHC Hollow Electron Lens Superconducting Solenoid Magnets
- Speaker at STEAM Software Framework to Simulate Transients in Accelerator Magnets and Circuits
Wei Wu (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Mechanical Design of the Mirror Structure for the full-length Nb3Sn Sextupole Coil of 45 GHz ECR Ion Source
Wei Wu (Shanghai Jiao Tong University)
- Speaker at Off-Power Operation of prototype on-board HTS Magnets for EDS-type Maglev Trains
Zeyu Wu (Kyushu University)
- Speaker at Measurement and Analyses of In-field Critical Currents in Multi-Filamentally Bi-2223 Tapes at Ultra-Low Electric-Field Criterion Down to at around 10^-13 V/m
Hong Wu (Bilfinger Noell GmbH)
- Speaker at Superconducting magnets for antimatter traps or neutron traps – designed and manufactured in industry
YUE WU (Beijing Jiaotong University)
- Speaker at AC loss reduction on a 6.5 MVA/25 kV HTS traction transformer by exploiting asymmetric conductor critical current
- Speaker at AC loss simulation in HTS coil windings coupled with an iron core
Wei Wu (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Superconducting magnet system for HIAF
Xin Xian (Huaiyin Institute of Technology)
- Speaker at Comprehensive performance evaluations on three kinds of radial hybrid magnetic bearings
Ling Xiao (State Key Laboratory of Traction Power, Southwest Jiaotong University)
- Speaker at Levitation force enhancement of a magnetic bearing using the stator of hybrid superconducting magnet
jianfeng Xie (Huazhong University of Science and Technology)
- Speaker at Reliability Analysis of Pulsed High Magnetic Field Facility at WHMFC
Canjie Xin
- Speaker at Strain measurements of a combined superconducting magnet on sextupole coils and solenoids during its assembly and excitation
Liu Xinyi (Hunan University)
- Speaker at Modelling and Investigation on the AC loss of the 2G YBCO tape influenced by High-order power harmonics
- Speaker at AC Loss Calculation on Stacked HTS YBCO Tapes Based on Magnetic Field Characteristic Parameters Analysis
Chenling Xiong (Sichuan University)
- Speaker at Study on the Through Duwar Wall Excitation of YBCO Coil Based on Linear-motor Type Flux Pump
Guangwei Xu (Kyoto University)
- Speaker at Effect of current-sharing and heat capacity of metal core on quench protection of spiral coated conductors
Aihua Xu (institute of plasma physics Chinese academy of sciences)
- Speaker at Feasibility Study of ITER In-Vessel Coils Bracket Manufacture and Integration
- Speaker at Mechanical and seismic performance analysis of the dewar used for helium gas tightness test for CFETR conductor
Qingjin XU (IHEP)
- Speaker at Progress of the High Field Magnet Program for SPPC
Hang Xu (Sichuan University)
- Speaker at Control the Output of an HTS Dynamo with a DC Background Field
Shengchen Xue (OSU)
- Speaker at Electrical and Thermal Contact Resistance in ReBCO Stacks and Cables with Modified Surfaces
- Speaker at Magnetization measurements of Bi-2212 Rutherford cable using a ± 3-T magnetometer
Renjun Xue (State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences)
- Speaker at A long-life, high-capacity and high-efficiency cryogenic system developed for high-Tc superconducting magnet applications
TSUYOSHI YAGAI (Sophia University)
- Speaker at Demonstration of a kA-class Rutherford Cables using MgB2 Wires for Energy Storage Device optimal for Liquid Hydrogen Indirect Cooling System
Akiyasu Yamamoto (Tokyo University of Agriculture and Technology)
- Speaker at A Comparative Study of Experimental and Computational Modeling for Thickness Dependence of Trapped Field in Machined MgB2 Bulk Superconductors
Shingo Yamamoto (Helmholtz-Zentrum Dresden-Rossendorf)
- Speaker at 60-T pulsed magnet for x-ray scattering experiments at the European XFEL
juzhuang yan
- Speaker at Numerical Study of Magnet Stability in the Superconducting Armature Winding for a Superconducting Generator
Yufan Yan (Tsinghua University)
- Speaker at Non-uniform screening-current-induced mechanical strains in small-scale REBCO insert coils
Mei Yang (IHEP,CAS,China)
- Speaker at Design and field performance of the octupole magnet with skew quadrupole component in HEPS
Wenjiao Yang (Southwest Jiaotong University)
- Speaker at Numerical study on dynamic characteristics of stack-type HTS Maglev system based on H-formulation
Chao Yang (Sichuan University)
- Speaker at A Kilo-Amp Linear-Motor Type Flux Pump
Dongsheng Yang (Hefei Institutes of Physical Science, Chinese Academy of Scienc)
- Speaker at Effect of Twisting Characteristics on Critical Current of Bi-2212 superconducting wire
Jiabin Yang (University of Cambridge)
- Speaker at Numerical study of quench behaviour in YBCO CORC cables
Tongjun Yang (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Electromagnetic Design of a 6 T Cos-theta Fast Cycling Dipole Model
Jing Yang (Institute of Modern Physics Chinese Acdemy of Sciences)
- Speaker at A System for Magnetic Measurement of the Triplet Quadrupoies for DTL
Wenjie Yang (Institute of modern physics, Chinese academy of sciences)
- Speaker at Magnetic Measurements on the Twin Aperture Orbit Correctors for HL-LHC at IMP
Zhenxuan Yang (Sichuan University)
- Speaker at Accurate Control the DC Output Current of the Linear-Motor Flux Pump Based on the Four Quadrant Method
Hongmin Yang (Kunsan National University)
- Speaker at Magnetic field distribution on a 400 MHz all-REBCO at 20mm DSV and multi-layered ferromagnetic shimming
Yu Yang (North China Electric Power University)
- Speaker at Critical Current Analysis of a Self-shielding DC HTS Cable with a “Sandwich” Structure
- Speaker at Design and Simulation of a 150 kVA Single-Phase HTS Transformer with 1G/2G Hybrid HTS Tapes
Zhai Yao (Southwest Jiaotong University)
- Speaker at Numerical Prediction of HTS Closed Coil Current Decay for Synchronous Motor Application
Huanli Yao (Institute of High Energy Physics, Chinese Academy of Sciences)
- Speaker at A preliminary study on a new epoxy resin system IR-3 for the high-field HTS applications
Changqing Ye
- Speaker at Dynamic characteristics of a fully HTS magnetic bearing under harmonic excitation
Haosheng Ye (Shanghai Jiao Tong University)
- Speaker at Effect of Different Impregnation Materials on Electromechanical Behaviors of Superconducting Compact Cables
Kazuya Yokoyama (Ashikaga Institute of Technology)
- Speaker at A numerical evaluation of magnetizing characteristic of bulk magnet excited by pulsed-field magnetization with different shaped soft-iron yokes
Miyeon Yoon (Korea Polytechnic University)
- Speaker at Persistent current mode operation of a cryocooler-cooled joint-less HTS magnet
Jonghoon Yoon (Seoul National University)
- Speaker at Investigation on Time-Varying Behavior of No-Insulation HTS Field Coil for Synchronous Motors Considering Armature Reaction and Slotting Effect
Makoto YOSHIDA (KEK)
- Speaker at Repetitive irradiation tests at cryogenic temperature by neutrons and protons on stabilizer materials of superconductor
Kodai Yoshimo (kagoshima-university)
- Speaker at Resistances between soldered YBCO tapes consisting of the stacked cable
wei you (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Study on Forced Flow Cooling of Superconducting Magnet for Compact Synchrotron
- Speaker at Designing a Large-gap Superferric Dipole Magnet for CEE
Shuangrong You (Victoria University of Wellington)
- Speaker at AC loss measurement and simulation in a REBCO coil assembly utilizing two types of low-loss magnetic flux diverters
Xu Yuanyuan (Guangdong ocean university)
- Speaker at Numerical Modeling and Optimization of an Axial-type Synchronous Motors with Bulk HTS
Yi Yue (Huazhong University of Science and Technology)
- Speaker at Research on fatigue characteristics of optical fiber applied in HTS cable
Louis ZANI (CEA)
- Speaker at UPDATES ON CEA DESIGN AND EXPERIMENTAL ACTIVITIES ON EU DEMO TF
Yujia Zhai (Hunan University)
- Speaker at High temperature superconducting magnet wireless power transmission technology based on flux pump
Yuhu Zhai (Princeton Plasma Physics Laboratory)
- Speaker at High Performance HTS Conductors for Compact Fusion Tokamak Facility
Tianjue Zhang (China Institute of Atomic Energy)
- Speaker at [Invited] Design of the HTS based, high power proton Cyclotron CYCIAE-100B
- Speaker at Coupling Design of Focusing Function Bending Magnet and High Current Electron Beam for 100 kW Irradiation Accelerator
Zhaoyu Zhang (North China Electric Power University)
- Speaker at Critical Current Analysis of a Self-shielding DC HTS Cable with a “Sandwich” Structure
- Speaker at Design and Simulation of a 150 kVA Single-Phase HTS Transformer with 1G/2G Hybrid HTS Tapes
Yifei Zhang (SuperPower Inc.)
- Speaker at Progress of 2G HTS Development and Process Improvement at SuperPower
Yi Zhang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Speaker at Numerical simulation and experimental study on the composite process of electromagnetic and electro-hydraulic tube forming
Pengnian Zhang
- Speaker at Internal strain responses of YBCO superconducting taps based using embedded and distributed FBGs under tensile，compression and bending loading
Yongliang Zhang (Chinses Academy of Science)
- Speaker at Cable R&D Program for 14T MRI
- Speaker at DC Performance of a Nb3Sn Rutherford Cable Solenoid Insert
Guomin Zhang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Research on HTS flywheel energy storage system in China
Zhan Zhang (Chinese Academy of Sciences (CAS) )
- Speaker at Development of an Iron-Based Superconductor Magnet: A Study on the 64 mm Diameter Iron-based Superconductors Coils
Kai Zhang (Hefei Institutes of Physical Science，Chinese Academy of Science)
- Speaker at Cryostat design for HTS conductors test in the field of 19.5 T @200 mm bore
Zhen Zhang (Institute of High Energy Physics, Chinese Academy of Sciences)
- Speaker at Preliminary strain measurement in high field superconducting magnets with fiber Bragg gating (FBG)
Danlu Zhang (The Ohio State University)
- Speaker at Numerical Study of Temperature Distribution within a Conduction-Cooled, MgB2 MRI Coil Segment
- Speaker at Simulation and Experiments on an AC-Injection Active Protection Scheme for a Conduction Cooled, React-and-Wind, MgB2 MRI Coil Segment
Penghui Zhang (SouthWest JiaoTong University)
- Speaker at Multi-Mode Vibration Suppression of High-Temperature Superconducting Maglev System Via Negative Resistance Electromagnetic Shunt Damper
Zixuan Zhang (Huazhong University of Science and Technology)
- Speaker at Toward energy-efficient multi-step electromagnetic forming process by using a curved-geometry field shaper: Principle, Prototype Design, and Experiments
Yan Zhang (Tianjin Univesity)
- Speaker at Comparative Study between E-Shaped and Fan-Shaped Electromagnetic Guideway for HTS Maglev
Zitong Zhang (Huazhong University of Science and Technology)
- Speaker at State predictive control of modular SMES magnet based on deep reinforcement learning
LING ZHAO (IHEP,CAS)
- Speaker at Inductive Method for the Critical Current Measurements on the Aluminum stabilized cable
LIXIA ZHAO (the Institute of Modern Physics,CAS)
- Speaker at Magnet Design of the Electron Cooling System for HIAF
Jigang Zhao (Institute of Electrical Engineering, Chinese Academy of Science)
- Speaker at Design and Test of a Bended Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System
Zijia Zhao (Tufts University)
- Speaker at Structural Modeling of HTS VIPER Cable for High-Field Magnet Applications
lu zhen (Shanghai Jiao Tong University)
- Speaker at The influence of metal plates on quench protection of high temperature superconducting pancake coils
shijun zheng (Institute of Modern Physics，Chinese Academy of Sciences)
- Speaker at Quench analysis and experiment of FECR prototype Nb3Sn superconducting magnet
Jinxing Zheng (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at [Invited] Engineering Design and R&D Work for Toroidal Field Superconducting Magnet of CFETR
Hengkang Zheng (Huazhong University of Science and Technology)
- Speaker at Superconducting Magnet Design for a Vertical-ring High Gradient Magnetic Separation System
Haowen Zheng (Huazhong University of Science and Technology)
- Speaker at Analysis of Three Types of SFCL in Ship MVDC System
Sergei Zherlitsyn (Helmholtz-Zentrum Dresden-Rossendorf)
- Speaker at [Invited] Status of the Pulsed-Magnet Program at the Dresden High Magnetic Field Laboratory
Tonghai Zhi (Huaiyin Institute of Technology)
- Speaker at Electromagnetic performance comparison between heteropolar and homopolar six-pole hybrid magnetic bearings
zhuoyan zhong (Shanghai Jiaotong University)
- Speaker at Demagnetization rate of no-insulation HTS coil for persistent-current operation in alternating fields
Chao Zhou ( Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Design, manufacture and test of ReBCO CICC for CFETR
- Speaker at A NbTi persistent current switch for MRI superconducting magnet
Benzhe Zhou (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at A method to reduce the influence of manufacturing error on magnetic field homogeneity in NMR magnets
Pengbo Zhou (Southwest Jiaotong University)
- Speaker at Behaviour prediction of parallel co-wound no-insulation HTS coil
Jian Zhou (ASIPP,China)
- Speaker at Thermal-electrical coupling quench study of HTS cyclotron for medical application
Hao Zhou (Shanghai Jiao Tong University)
- Speaker at The electrical behavior of stacked coated conductors concerning the interlayer resistance
Difan Zhou (Shanghai University)
- Speaker at Conception design of a magnetic flux lens using stacked HTS tapes
Jiahui Zhu (China Electric Power Research Institute)
- Speaker at AC loss measurement of a tri-axial superconducting cable based on a digital compensation method
- Speaker at Coordination Strategy of Magneto-biased Superconducting Fault Current Limiter and Relay Protection in 10 kV Urban Power Grid
li zhu
- Speaker at Mechanical Design of the Mirror Structure for the full-length Nb3Sn Sextupole Coil of 45 GHz ECR Ion Source
Lingfeng Zhu
- Speaker at conceptual design of closed-loop HTS magnet with thermal switch
Alexander Zlobin (Fermilab)
- Speaker at [Invited] Main results and lessons learned from the MDPCT1 R&D program
- Speaker at Development of a small-aperture cos-theta dipole insert coil based on Bi2212 Rutherford cable and stress management structure
Lorenzo Zoboli (ENEA & Università Tor Vergata)
- Speaker at Updated structural assessment of the Poloidal Field Coils of the DTT tokamak
Xinyu Zou (Huazhong University of Science and Technology)
- Speaker at Design of 10MJ toroidal field D-type superconducting energy storage magnet
Павел Дегтяренко (JSC SuperOx)
- Speaker at Superconducting properties of production 2G HTS wires based on YBCO with Y2O3 nanoparticles in magnetic field up to 16 T
ナオキヒラノ (核融合科学研究所)
- Speaker at Development of static magnetic refrigeration system using multiple high-temperature superconducting coils
馨丹张
- Speaker at Study on Screening Current of Like Quasi-isotropic Conductor Based on optimized T-A formulation
颜冰杨
- Speaker at The Magnetic Center Alignment Based on FECR Superconducting Ion-source After Cryostat Installation
Tamaru 田丸 (九州大学大学院)
- Speaker at Fabrication of magnetic field shielding film using YBa2Cu3O7-δ powder
军谭
- Speaker at Design and experimental investigations on the helium circulating cooling system operating at around 20 K for a 10-Mvar class HTS dynamic synchronous condenser
鹏赵
- Speaker at Experimental Research on the Translational Characteristics of High Temperature Superconducting Translational System

Choose timezone

MT27, 27th International Conference on Magnet Technology

Share this page

Direct link

Social networks

Calendaring