15–19 Nov 2021
Fukuoka Convention Center
Asia/Tokyo timezone

Fabrication and Characteristics of HTS Racetrack Pancake Coils after Impregnation Process Using Various Materials

WED-PO2-616-05
17 Nov 2021, 10:30
2h
Fukuoka Convention Center

Fukuoka Convention Center

Speakers

Wanshuo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences)Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

Description

Abstract: The YBCO racetrack pancake coils were wound by dry wing followed by impregnation. Various materials such as epoxy resin, paraffin, grease and so on with and without fillers were measured to impregnate coils. The superconducting characteristics of the coils after above different materials of impregnation were tested. Due to the anisotropic of the racetrack shaped coils, the impregnation material need to improve the stiffness of the coil. Among the materials, paraffin-impregnated coil exhibited the stiffness to some extent, strong operability and repeatability but had the disadvantage of poor heat resistance.

Keywords:YBCO; Racetrack Pancake Coils; Vacuum Impregnation; Superconducting Characteristics

Primary authors

Wanshuo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences) Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Shunzhong Chen (Institute of Electrical Engineering, Chinese Academy of Sciences) Junsheng Cheng (Institute of Electrical Engineering, Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

Presentation materials

There are no materials yet.