Name: MT27, 27th International Conference on Magnet Technology
Start: 2021-11-15T07:00:00+09:00
End: 2021-11-19T20:00:00+09:00
Location: Fukuoka Convention Center

3D Conceptual Design of R2D2, the Research Racetrack Dipole Demonstrator (in session "WED-PO2-111 High Field Accelerator Magnets II: Hybrid and HTS")

3D magnetic field maps and alignment of the Superconducting Multipole Triplet (SMT) (in session "WED-OR3-702 Magnetization and Loss")

3D modeling of the decapole corrector for the FAIR project (in session "WED-PO2-116 Resistive acclerator magnets I")

20 T Hybrid Nb3Sn-HTS Block-coil Design for a Future Particle Collider (in session "WED-PO2-111 High Field Accelerator Magnets II: Hybrid and HTS")

25.1T generation in 25T cryogen-free superconducting magnet with a modified Bi2223 insert (in session "THU-OR5-301 High Field Magnet")

25T/52mm warm-bore All YBCO superconducting magnet designed for High-frequency Gyrotrons (in session "THU-OR5-301 High Field Magnet")

60-T pulsed magnet for x-ray scattering experiments at the European XFEL (in session "TUE-OR1-304 Resistive and Pulsed High-Field Magnets")

[Invited] 15% reduction in AC loss of a 3-phase 1 MVA HTS transformer by exploiting asymmetric conductor critical current (in session "FRI-OR7-502 SMES, Superconducting Transformers, Cables and Bulks")

[Invited] 43+T Grenoble Hybrid Magnet: From final Assembly to Commissioning of the Superconducting Outsert (in session "THU-OR5-301 High Field Magnet")

[Invited] A subscale canted cosθ dipole magnet using high-temperature superconducting STAR™ wires (in session "WED-PO2-723 Moel Coil II & Test Facilities")

[Invited] Analysis of the production of MQXFA Low Beta Quadrupoles for HL-LHC at 50% coil fabrication (in session "WED-OR2-103 HL-LHC Accelerator Magnets I")

[Invited] Assembly and Test of the world’s first conduction-cooled NbTi Magnet System for Magnetic Density Separation (in session "WED-OR3-503 Magnet System, Novel and Other Applications")

[Invited] AUP first pre-series Cryo-Assembly Design Production and Test Overview (in session "WED-OR2-103 HL-LHC Accelerator Magnets I")

[Invited] Bringing a Nuclear Quality Approach to Superconducting Magnets (in session "WED-SS Special Session "Lesson learned"")

[Invited] Conceptual Design Study of the Outsert superconducting Coils of the Hybrid Magnets (in session "TUE-PO1-305 HTS/LTS coil")

[Invited] CORC® cables with superior tensile strain performance : FEM and experiments (in session "TUE-PO1-606 High Tc Wires and Cables III")

[Invited] Design of the HTS based, high power proton Cyclotron CYCIAE-100B (in session "TUE-PO1-106 Accelerator Magnets IV: HTS")

[Invited] Design, fabrication and soundness test of a Bi2223 magnet immersed in liquid hydrogen (in session "THU-OR4-704 Stability and Quench")

[Invited] Development of high-strength CORC® conductors with record-breaking irreversible axial tensile strain limit exceeding 7 % (in session "FRI-OR6-603 High Tc Wires and Cables II")

[Invited] Development of precise shimming technique with materials having low saturation magnetization (in session "THU-PO3-713 Magnetization and Field Quality I")

[Invited] Engineering Design and R&D Work for Toroidal Field Superconducting Magnet of CFETR (in session "WED-OR3-201 Fusion Magnets I")

[Invited] Experimental and theoretical study on power generation characteristics of 1 kW class fully high-temperature superconducting induction/synchronous generator using a stator winding with a bending diameter of 20 mm (in session "THU-OR5-501 Superconducting Rotating Machine, Levitation and Flywheel")

[Invited] First images of the Iseult Whole Body 11.7 T MRI (in session "THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications")

[Invited] Lessons Learned in No-insulation HTS Magnet Technology (in session "WED-SS Special Session "Lesson learned"")

[Invited] Lessons Learned in the Development of Accelerator Magnets based on Nb3Sn and HTS (in session "WED-SS Special Session "Lesson learned"")

[Invited] Lessons learnt in HL-LHC interaction region superconducting magnets: two case studies (in session "WED-SS Special Session "Lesson learned"")

[Invited] Magnets for low Emittance Machines: An Overview (in session "THU-PO3-117 Resistive acclerator magnets II")

[Invited] Main results and lessons learned from the MDPCT1 R&D program (in session "FRI-OR6-101 Accelerator Magnets I: HFM and others applications")

[Invited] Modelling and characterization of a ReBCO HTS degaussing demonstrator (in session "TUE-PO1-722 Model Coil I")

[Invited] Portable, desktop high-field magnet systems using bulk high-temperature superconductors (in session "FRI-OR7-502 SMES, Superconducting Transformers, Cables and Bulks")

[Invited] Preliminary tests 12 T REBCO isolated solenoid magnet used as compact 1 MJ SMES. (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

[Invited] Some Lessons Learned During 27 Years Operating Above 27 Tesla. (in session "WED-SS Special Session "Lesson learned"")

[Invited] Stability of Nb3Sn Superconducting Planar Undulator for ANL Advanced Photon Source (in session "WED-PO2-105 Accelerator Magnets III: undulators and related magnets")

[Invited] Stability of Two Impregnated 1.5-T NbTi Coils Operated in the 4.2-6 K Range, Paraffin vs. Solid Nitrogen (in session "THU-PO3-710 Stability")

[Invited] Status of the HFML-Nijmegen 45 T Hybrid Magnet (in session "THU-OR5-301 High Field Magnet")

[Invited] Status of the Pulsed-Magnet Program at the Dresden High Magnetic Field Laboratory (in session "TUE-OR1-304 Resistive and Pulsed High-Field Magnets")

[Invited] Strategy for developing the EU-DEMO Magnet System in the Conceptual Design Phase (in session "WED-OR3-201 Fusion Magnets I")

[Invited] Successes & Failures in Design Solutions During the 30 Year Life of ITER (and how we could have improved) (in session "WED-SS Special Session "Lesson learned"")

[Invited] The SPARC Toroidal Field Model Coil (in session "THU-OR4-202 Fusion Magnets II")

[Plenary] A circular economy using superconductors: magnetic density separation (in session "Plenary: Young Scientist Plenary")

[Plenary] Commercial Ultra-High-Field NMR Magnets with HTS Conductors (in session "Plenary: Robert Herzog (Bruker Switzerland AG); Commercial Ultra-High-Field NMR Magnets with HTS Conductors")

[Plenary] Coupling superconducting magnet technology with large momentum acceptance beamlines to enable lightweight, high performance gantries for ion beam cancer therapy (in session "Plenary: Young Scientist Plenary")

[Plenary] HTS Superconducting Joint for Persistent Current Mode Magnets (in session "Plenary: Young Scientist Plenary")

[Plenary] Magnet Technology for Train (in session "Plenary: Masaru Tomita (Railway Technical Research Institute); Magnet Technology for Train")

[Plenary] Muon Colliders and Their Magnet Technology Needs (in session "Plenary: Mark Palmer (BNL); Muon Colliders and Their Magnet Technology Needs")

[Plenary] Nb3Sn: beyond NbTi, for moving beyond the Standard Model (in session "Plenary: Young Scientist Plenary")

[Plenary] Overview of Construction and First Commissioning Results of JT-60SA Superconducting Magnets (in session "Plenary: Haruyuki Murakami (QST); Overview of Construction and First Commissioning Results of JT-60SA Superconducting Magnets")

[Plenary] Radiation Therapy Systems (in session "Plenary: Eric Forton (IBA - Ion Beam Applications); Radiation Therapy Systems")

[Plenary] The benefits of the analytical approach for the optimization of superconducting magnets from the early design stage (in session "Plenary: Young Scientist Plenary")

[Plenary] Tokamaking, some reflections and afterthoughts (in session "Plenary: Young Scientist Plenary")

A 3D electromagnetic model for eddy currents analysis in superconducting magnets for fusion applications (in session "THU-PO3-205 Fusion V: Toward DEMO")

A Comparative Study of Experimental and Computational Modeling for Thickness Dependence of Trapped Field in Machined MgB2 Bulk Superconductors (in session "THU-PO3-612 Bulk Magnets")

A complete magnetic design for the DUNE ND-GAr solenoid magnet (in session "WED-PO2-114 Particle Detector Magnets")

A complete, coupled model for Electro-Magnetic, Electro-Thermal and Mechanical analysis for axi-symmetric coils using variational principles (in session "FRI-OR6-701 Design and Analysis")

A Double-Stator Single-Rotor Field Modulated Motor with HTS Bulks (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

A Dual-Stator HTS Modular Linear Vernier Motor for Long Stroke Applications (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

A FEM/BEM scalar potential formulation for 3D nonlinear magnetostatic analysis in superconducting accelerator magnets, implemented in PITHIA-EM software (in session "WED-PO2-718 Design and Analysis I")

A Flexible Control System Design of Pulsed High Magnetic Field Facility based on Physical Model (in session "THU-PO3-LN2 Late News II")

A High-Speed Maglev Test Rig Designed for HTS Pining Levitation and Electrodynamic Levitation (in session "THU-OR5-501 Superconducting Rotating Machine, Levitation and Flywheel")

A Kilo-Amp Linear-Motor Type Flux Pump (in session "TUE-PO1-804 Flux pumps")

A long-life, high-capacity and high-efficiency cryogenic system developed for high-Tc superconducting magnet applications (in session "THU-PO3-802 Cryostats and Cooling systems")

A Low-Temperature-Dependent Calibration of Hall probes for CPMU (in session "TUE-PO1-115 Permanent accelerator magnets")

A method to reduce the influence of manufacturing error on magnetic field homogeneity in NMR magnets (in session "THU-PO3-405 Magnets for NMR")

A miniaturized high temperature superconducting flux pump (in session "TUE-PO1-804 Flux pumps")

A NbTi persistent current switch for MRI superconducting magnet (in session "THU-PO3-404 Magnets for MRI")

A New Active Field Uniformity Improvement Method with Optimally Designed Compensation coils for Low-temperature Superconducting Magnets (in session "TUE-PO1-LN1 Late News I")

A New Branching Point and Primary Beam Line at the J-PARC Hadron Experimental Facility (in session "WED-PO2-116 Resistive acclerator magnets I")

A New Structure for the Coaxial Magnetic Gear with HTS Bulks (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

A novel cryogenic model for SiC MOSFET (in session "THU-PO3-803 Current supply, regulation & cryogenic power electronics")

A Novel Design of Multi-coil Magnet System for 100 T (in session "TUE-OR1-304 Resistive and Pulsed High-Field Magnets")

A Novel High Heat Capacity Resin for Impregnation of Nb3Sn Superconducting Magnets (in session "THU-PO3-617 Other Components for Magnets")

A Novel HTS Magnetic Field Modulation Type Magnetic Gear Hybrid Motor With Irregular Halbach Array (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

A Novel Quench Detection Method for SMES (in session "TUE-PO1-708 Quench Analysis II")

A Novel Switch Design for Compact HTS Flux Pumps (in session "TUE-PO1-804 Flux pumps")

A Numerical and Experimental Study on Dynamic Operation of a Synchronous Rotating Machine with NI HTS Field Windings (in session "THU-OR5-501 Superconducting Rotating Machine, Levitation and Flywheel")

A numerical evaluation of magnetizing characteristic of bulk magnet excited by pulsed-field magnetization with different shaped soft-iron yokes (in session "THU-PO3-612 Bulk Magnets")

A Numerical Method for Simulating the Quench Behavior of Superconductors (in session "THU-PO3-707 Quench Analysis I")

A preliminary cryogenic performance test of the 4.8-m-long cryostat for superconducting undulators (in session "THU-PO3-802 Cryostats and Cooling systems")

A preliminary study on a new epoxy resin system IR-3 for the high-field HTS applications (in session "THU-PO3-109 Accelerator Magnets VI: model analysis, impregnation")

A propulsion-function-integrated HTS maglev system based on reversed excitation mode of electromagnetic guideway (in session "TUE-PO1-509 Maglev and Levitation I")

A Pulse Forming Network Power Supply for Quench Protection Heaters (in session "TUE-PO1-705 Quench Detection I")

A Quench Detection and Monitoring System for Superconducting Magnets at Fermilab (in session "WED-PO2-706 Quench Detection II")

A Simple Calculation Method for Center Magnetic Flux Density of a Magnetic Core Electromagnet with a Wide Air-Gap (in session "WED-PO2-723 Moel Coil II & Test Facilities")

A study on the electrical contact resistance and thermal conductivity of soldered-metal insulation coil with conduction cooling (in session "TUE-PO1-722 Model Coil I")

A System for Magnetic Measurement of the Triplet Quadrupoies for DTL (in session "TUE-PO1-714 Magnetization and Field Quality Ⅱ")

A temperature and over current controlled persistent current switch for high temperature superconducting magnets (in session "THU-PO3-803 Current supply, regulation & cryogenic power electronics")

A top-down modeling approach for DEMO magnetic system (in session "THU-PO3-205 Fusion V: Toward DEMO")

A Validation Study of Updated Features in a New 835-MHz REBCO Insert Coil for the MIT 1.3-GHz NMR Magnet (in session "THU-PO3-405 Magnets for NMR")

About the first 6 toroidal field coils and 2 poloidal field coils completed by EU for ITER (in session "THU-OR4-202 Fusion Magnets II")

AC Loss Calculation on Stacked HTS YBCO Tapes Based on Magnetic Field Characteristic Parameters Analysis (in session "TUE-PO1-711 Losses in conductors and coils")

AC loss measurement and simulation in a REBCO coil assembly utilizing two types of low-loss magnetic flux diverters (in session "TUE-PO1-711 Losses in conductors and coils")

AC loss measurement of a tri-axial superconducting cable based on a digital compensation method (in session "WED-PO2-712 Losses in HTS conductors")

AC Loss Measurement of Double Pancakes Wound with MgB2 Rutherford Type Superconductor (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

AC loss measurement of MgB2 superconducting coils under rotating magnetic field (in session "TUE-PO1-711 Losses in conductors and coils")

AC loss of HTS coils wound with various types of CORC (in session "WED-PO2-712 Losses in HTS conductors")

AC loss reduction on a 6.5 MVA/25 kV HTS traction transformer by exploiting asymmetric conductor critical current (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

AC loss simulation in HTS coil windings coupled with an iron core (in session "WED-PO2-403 Magnets for Medical App II")

AC loss simulation of NI REBCO pancake coils in external low-frequency magnetic field (in session "TUE-PO1-711 Losses in conductors and coils")

AC losses in JT-60SA magnets during commissioning: experimental analysis and simulations (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

AC losses of high temperature superconducting magnet under the external magnetic fields generated by the ground coils of electrodynamic suspension train (in session "WED-PO2-510 Maglev and Levitation II")

Accurate Control the DC Output Current of the Linear-Motor Flux Pump Based on the Four Quadrant Method (in session "TUE-PO1-804 Flux pumps")

Adaptive Element Equivalent Circuit of No-Insulation High Temperature Superconductor Coil Containing Multiple Defects (in session "THU-PO3-707 Quench Analysis I")

Advanced electrical quality assurance methods for the series production of the superconducting coils of the HL-LHC high order corrector magnets (in session "TUE-PO1-720 Design & Diagnostics")

Advanced HTS tape for high-field applications by THEVA (in session "TUE-OR1-602 High Tc Wires and Cables I")

Air-gap Observation in Joints of REBCO Tapes by Use of X-ray Computed Tomography (in session "WED-PO2-613 Joints between Superconductors")

An adaptive control strategy of electromagnetic bearing for flywheel energy storage based on online parameters identification (in session "THU-PO3-511 Maglev and Levitation III")

An electro-thermal coupling model of quench protection using nonlinear quench-back for superconducting magnets (in session "TUE-PO1-705 Quench Detection I")

An examination of the mechanical performance of the 4.5 m long MQXFA Pre-Series magnets for the Hi-Lumi LHC Upgrade (in session "THU-PO3-112 HL-LHC Accelerator Magnets II: Nb3Sn")

An HTS Model Magnet for MRI Systems Equipped with Electrically Conductive Epoxy Resin Used in Quench Protection (in session "THU-OR4-704 Stability and Quench")

An Improved Passive Shimming Strategy for the Unsaturated Magnetization Problem in the Low-field Superconducting MRI Magnet (in session "THU-PO3-404 Magnets for MRI")

An Induction-Coil Measurement System for Normal- and Superconducting Solenoids (in session "WED-PO2-721 Novel Diagnostics")

An Optimal Configuration Method of Superconducting Magnet with Iron Shield using Model Order Reduction (in session "FRI-OR6-701 Design and Analysis")

Analyses of Transient Electrical Behavior and Thermal Stability in No-Insulation REBCO Pancake Coils Using Electromagnetic-thermal Model (in session "WED-PO2-718 Design and Analysis I")

Analysis and design of Control Sequence for Multi-Stage and Ultrahigh Magnetic System at WHMFC (in session "THU-PO3-LN2 Late News II")

Analysis and Experiments on Electrical and Thermal Characteristics of REBCO Racetrack Coil co-wound by Stainless Steel Tape under asynchronous rotating magnetic field (in session "TUE-PO1-722 Model Coil I")

Analysis of AC losses in coated conductor stack cables for fusion magnets (in session "WED-PO2-712 Losses in HTS conductors")

Analysis of AC losses in the tests of the ITER CS Module #2 (in session "TUE-PO1-203 Fusion III: ITER")

Analysis of Coupled Electromagnetic Thermal Effects of Scanning Magnet for SESRI (in session "WED-PO2-116 Resistive acclerator magnets I")

Analysis of cut-off characteristics of transformer-type superconducting DC circuit breaker according to reactance of superconductor and transformer turns ratio. (in session "THU-PO3-512 SFCL")

Analysis of dynamic thermal and mechanical behaviors of HTS magnet for high-speed superconducting maglev (in session "TUE-PO1-509 Maglev and Levitation I")

Analysis of electromagnetic characteristics of a novel no-insulation HTS coil with stainless steel tape wrapped around the outer layer of the coil (in session "THU-PO3-405 Magnets for NMR")

Analysis of quench data and performance of MDPCT1 – the 15 T Nb3Sn dipole demonstrator (in session "FRI-OR6-101 Accelerator Magnets I: HFM and others applications")

Analysis of Radial Preload of 14 T MRI Magnet (in session "THU-PO3-404 Magnets for MRI")

Analysis of the Defect-Irrelevant behavior of a No-Insulation HTS pancake coil including multiple superconductive joints (in session "WED-PO2-709 No-Insulation Coils")

Analysis of the Quench Experiments on HTS conductors (in session "TUE-PO1-708 Quench Analysis II")

Analysis of the thermal-hydraulic effects of a plasma disruption on the DTT magnet system (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Analysis of Three Types of SFCL in Ship MVDC System (in session "THU-PO3-512 SFCL")

Analysis on Fault Current Limiting and Recovery Characteristics of Three-Phase Transformer Type SFCL using Two SMs between Secondary Windings (in session "THU-PO3-512 SFCL")

Analytical modeling of coupling losses in CICCs, extensive study of the COLISEUM model (in session "WED-OR3-702 Magnetization and Loss")

Angular dependences of critical current for REBCO coated conductors under bending strains (in session "TUE-PO1-609 Stability and Mechanical Properties")

Application of direct diffusion bonding technique for preparation of low-resistivity joint in REBCO coated conductors (in session "WED-PO2-613 Joints between Superconductors")

Application of the Universal Quench Detection System to the Protection of the High-Luminosity LHC Magnets at CERN (in session "WED-PO2-706 Quench Detection II")

Assembly and mechanical analysis of the Canted-Cosine-Theta subscale magnets (in session "WED-PO2-723 Moel Coil II & Test Facilities")

Assessment of coil design and pulse unit parameters for the optimization in the electromagnetic forming process of metal sheet (in session "THU-PO3-719 Design and Analysis II")

Automatic Detection of Local Obstacles in a Long Length RE-123 Coated Conductor by Deep Learning Based Image Classification in Reel-to-Reel Magnetic Microscopy (in session "THU-PO3-LN2 Late News II")

Axial and transverse loading model of CORC® cable considering initial contact from cabling process (in session "TUE-PO1-606 High Tc Wires and Cables III")

Basic study on coil structure for high-temperature superconducting cable termination applying a wireless power transmission system (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Basic Study on Stable Levitation for Magnetically Levitated Mover (MAGLEM) Using High Tc SC Coils (in session "TUE-PO1-509 Maglev and Levitation I")

Behavior of Bi-2212 wires above liquid Helium temperature: critical current, irreversibility field and filaments coupling (in session "WED-PO2-610 High Tc Wires and Cables IV")

Behaviour prediction of parallel co-wound no-insulation HTS coil (in session "WED-PO2-709 No-Insulation Coils")

Bending and Twisting Properties of Quasi-isotropic Superconducting Strand at Liquid Helium Temperatures Based on Laminate Theory (in session "TUE-PO1-609 Stability and Mechanical Properties")

Bending Characteristics of Cable-In-Conduit Conductor based on Quasi-Isotropic Strands (in session "THU-PO3-717 Mechanical Behavior of Conductor")

Bending strain sensitivity of critical current in REBCO CC windings with different pitches on a large diameter former under static fatigue condition at 77 K (in session "WED-OR2-703 Mechanical Behavior and Coil Tests")

Bi-2212 Coil Technology (in session "WED-OR2-302 HTS coil I")

BSCCO geometrical and soldering optimisation for high current lead application (in session "THU-PO3-614 Current Leads")

Cable R&D Program for 14T MRI (in session "WED-PO2-604 Low Tc Wires and Cables")

CERN North Area Multi-Purpose Superconducting Magnet Facility (in session "WED-PO2-114 Particle Detector Magnets")

Characteristics of magnetic force interaction of СС-tape windings with a permanent magnet guideway. (in session "TUE-PO1-509 Maglev and Levitation I")

Characterization of a soldered metal insulation HTS ReBCO demonstrator coil for an astroparticle physics experiment in space (in session "WED-OR3-503 Magnet System, Novel and Other Applications")

Characterizing performance degradation through the analysis of V-I measurements in Nb3Sn accelerator magnets (in session "WED-PO2-721 Novel Diagnostics")

Choice of 2G HTS tape for magnet design according to quench protection requirements. (in session "TUE-PO1-705 Quench Detection I")

Cloverleaf dipole demonstrator magnet with 2-tape ReBCO stack conductor (in session "WED-PO2-111 High Field Accelerator Magnets II: Hybrid and HTS")

Coil error analysis of a curved CCT magnet applied to a superconducting gantry (in session "TUE-PO1-LN1 Late News I")

Combined method of mapping fields in pulsed bending magnets (in session "TUE-PO1-720 Design & Diagnostics")

Compact MRI (in session "THU-PO3-404 Magnets for MRI")

Comparative Analysis of MAXFAP1b Coils with respect to Magnet Training Behavior. (in session "WED-PO2-716 Mechanical Behavior of Coil II")

Comparative Design Study of HTS Synchronous Motor with Inner and Outer Rotor Type Based on Multi-Objective Optimization (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Comparative electromechanical study of different Nb3Sn CICC designs for tokamaks with FE simulations (in session "THU-PO3-205 Fusion V: Toward DEMO")

Comparative Study between E-Shaped and Fan-Shaped Electromagnetic Guideway for HTS Maglev (in session "TUE-PO1-509 Maglev and Levitation I")

Comparative Study of HTS linear synchronous motor with different core and winding structures for electromagnetic launching (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Comparative Study of MW class Superconducting Machines according to Shielding and Electromagnetic Structures Based on Analytical Method (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Comparison and analysis of inductance according to toroidal winding type of superconducting element combined the DC circuit breaker (in session "THU-PO3-512 SFCL")

Comparison between T-A formulation and uniform current assumption for the critical current calculation of high temperature superconductor ReBCO coils (in session "THU-PO3-719 Design and Analysis II")

Comparison of Current Limiting Characteristics of REBCO Superconducting Wire of the Electrical Coupling Condition between Core and Coil (in session "THU-PO3-512 SFCL")

Comparison of Solenoid-type and Annular-type Parallel Inductors Schemes in H-SFCL of Shipboard MVDC IPS (in session "THU-PO3-512 SFCL")

Completion and Installation of the ITER Lower Poloidal Field Coils PF5 & 6 (in session "THU-OR4-202 Fusion Magnets II")

Completion of the first TF coil in the second manufacturing line in Japan (in session "THU-OR4-202 Fusion Magnets II")

Comprehensive performance evaluations on three kinds of radial hybrid magnetic bearings (in session "THU-PO3-511 Maglev and Levitation III")

Concept Design of a Novel Superconducting PTO Actuator for Wave Energy Extraction (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Concept Design of Power Source for High Temperature Superconducting Ship Deperming Coil System (in session "THU-PO3-803 Current supply, regulation & cryogenic power electronics")

Concept Design Study of a Conductor Test Facility Magnet over 16T (in session "TUE-PO1-305 HTS/LTS coil")

Conception design of a magnetic flux lens using stacked HTS tapes (in session "THU-PO3-612 Bulk Magnets")

Conceptual Design and AC Loss Analysis of an HTS Central Solenoid Winding Pack for the EU-DEMO Fusion Reactor (in session "WED-PO2-204 Fusion IV: HTS conductors and coils")

Conceptual Design and Optimisation of HTS Roebel Tapes (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Conceptual Design of a C-shaped 6.4 T Superconducting Dipole Magnet (in session "TUE-PO1-LN1 Late News I")

Conceptual design of a linear generator suitable for marine energy power generation (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Conceptual design of a magnetic refrigerator for cooling quantum computers (in session "THU-PO3-802 Cryostats and Cooling systems")

conceptual design of closed-loop HTS magnet with thermal switch (in session "TUE-PO1-305 HTS/LTS coil")

Conceptual design of CRAFT TF coil heat treatment (in session "THU-PO3-205 Fusion V: Toward DEMO")

Conceptual Design of Multi Power Receivers for Wireless Power Supply of Quench Detector with Highly Insulating Stability under Superconducting High Field Magnet (in session "WED-PO2-706 Quench Detection II")

Conceptual Design of the HL-LHC Hollow electron lens superconducting magnet system (in session "TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi")

Conceptual design of the mobile cryomagnets for novel microwave technologies (in session "WED-PO2-505 Special Purpose magnets II: Induction Heating, Magnetic Refrigeration & other applications")

Conceptual design optimization of a 20 T hybrid cos-theta dipole superconducting magnet for future High-Energy particle accelerators. (in session "WED-PO2-111 High Field Accelerator Magnets II: Hybrid and HTS")

Conduction Cooling Test of Short Period NI HTS Undulator at Different Opearating Temperature Ranges 20-77 K (in session "TUE-OR1-102 Magnets for accelerator science and particle physics")

Conductive micro-path for current sharing between REBCO tapes in high-Tc superconducting conductors to improve stability (in session "TUE-PO1-609 Stability and Mechanical Properties")

Conductor design for toroidal field coils of a high magnetic field tokamak TRT. (in session "WED-PO2-204 Fusion IV: HTS conductors and coils")

Conductors for Fast Ramping Accelerator Magnets (in session "TUE-OR1-102 Magnets for accelerator science and particle physics")

Construction and test of the enhanced Racetrack Model Coil, first CERN R&D magnet for the FCC (in session "TUE-PO1-110 High Field Accelerator Magnets I: Nb3Sn")

Construction of Cryogen-Free 4.3T Superconducting Wiggler for NSLS-II Ring (in session "TUE-PO1-LN1 Late News I")

Construction status of the superconducting magnet system for the COMET experiment (in session "FRI-OR6-101 Accelerator Magnets I: HFM and others applications")

Contact Resistance Dependent Transient Loss of REBCO No-insulation Magnet using T-A formula during Ramping Process (in session "THU-PO3-LN2 Late News II")

Control of Rotatable-Quadrupole Magnets Angles for 3-D Spiral Injection Test Experiment (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Control the Output of an HTS Dynamo with a DC Background Field (in session "THU-PO3-803 Current supply, regulation & cryogenic power electronics")

Coordination Strategy of Magneto-biased Superconducting Fault Current Limiter and Relay Protection in 10 kV Urban Power Grid (in session "THU-PO3-512 SFCL")

Coupling Design of Focusing Function Bending Magnet and High Current Electron Beam for 100 kW Irradiation Accelerator (in session "THU-PO3-117 Resistive acclerator magnets II")

Coupling time constant measurements and analyses of spiral copper-plated multifilament coated conductors (in session "WED-PO2-712 Losses in HTS conductors")

Coupling time constant measurements of short pieces of copper-plated multifilament coated conductors at 4.2 K and 77 K (in session "WED-PO2-712 Losses in HTS conductors")

Critical Bending Radius Test and Analysis of 7-Filament Ba1-xKxFe2As2 Iron-Based Superconductor Tapes under 12 T Background Field (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

Critical Current Analysis of a Self-shielding DC HTS Cable with a “Sandwich” Structure (in session "WED-PO2-610 High Tc Wires and Cables IV")

Critical current and nano-structural properties of K-doped BaFe$_2$As$_2$ epitaxial thin films by molecular beam epitaxy (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

Critical current of various ReBCO tapes under uniaxial strain (in session "THU-PO3-717 Mechanical Behavior of Conductor")

Cryogenic DC/DC converter for superconducting magnet applications (in session "WED-OR3-503 Magnet System, Novel and Other Applications")

Cryostat design for HTS conductors test in the field of 19.5 T @200 mm bore (in session "THU-PO3-802 Cryostats and Cooling systems")

Cryostat for HECRAL Superconducting Magnet (in session "THU-PO3-802 Cryostats and Cooling systems")

Current and temperature distributions in HTS coils with and without insulation in a layer-wound configuration (in session "WED-PO2-709 No-Insulation Coils")

Current behaviors of NI REBCO pancake coil wound with multi-bundled conductors during charging and against local normal state transition. (in session "WED-PO2-709 No-Insulation Coils")

Current Bypass of a Metal Stitching Smart Insulation 2G HTS Coil (in session "WED-PO2-616 Electrical Insulation for Magnets")

Current Centre Line calculation method and results for ITER Poloidal Field Coils (in session "TUE-PO1-203 Fusion III: ITER")

Current Centre Line control, results and comparison after the manufacturing of the ITER Toroidal Field Coils (in session "TUE-PO1-203 Fusion III: ITER")

Current distribution modeling in the open-source OPENSC2 tool for the multi-physics analysis of HTS and LTS superconducting cables (in session "THU-PO3-719 Design and Analysis II")

Current review of the 2G-HTS wires production for high-field applications at SuperOx (in session "TUE-OR1-602 High Tc Wires and Cables I")

Current Source Converter Based Photovoltaic Synchronous Generator Incorporated with a SMES (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Current Status of the Facility for High Field Cable Testing at Fermilab (in session "WED-PO2-723 Moel Coil II & Test Facilities")

Current- transport properties of HTS-FAIR conductor at variable temperatures in high magnetic field (in session "TUE-PO1-606 High Tc Wires and Cables III")

Current-sharing between filaments and voltage-current characteristics of copper-plated multifilament coated conductors (in session "TUE-PO1-LN1 Late News I")

Cyclic Axial Pressure Limits of REBCO Double Pancake Coils with Variable Co-wind Dimensions at 77 K (in session "TUE-PO1-305 HTS/LTS coil")

DC and AC characterization of a Low-Field Nb3Sn prototype conductor for a DEMO TF Coil (in session "THU-OR5-601 A15-type Superconducting Wires and Cables")

DC Fault Current Limiting Characteristics of Flux-Lock Type SFCLs with Parallel and Series connection between Two Coils (in session "THU-PO3-512 SFCL")

DC Performance of a Nb3Sn Rutherford Cable Solenoid Insert (in session "WED-PO2-723 Moel Coil II & Test Facilities")

DCT&CCT superconducting multiplets for HIAF-HFRS (in session "THU-PO3-108 Accelerator Magnets VI: LTS")

Deformation Analysis of no-insulation REBCO coils considering turn-to-turn contact configuration (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

Deformation of Copper Matrix Conductors under Cyclic Loading (in session "THU-PO3-617 Other Components for Magnets")

Degradation Behavior due to Flatwise and Edgewise Bending of Critical Current of BSCCO Tapes (in session "WED-PO2-610 High Tc Wires and Cables IV")

Demagnetization rate of no-insulation HTS coil for persistent-current operation in alternating fields (in session "TUE-PO1-711 Losses in conductors and coils")

DEMO fusion reactor Toroidal Field coil optimized layer-wound design (in session "THU-PO3-205 Fusion V: Toward DEMO")

Demonstration of a kA-class Rutherford Cables using MgB2 Wires for Energy Storage Device optimal for Liquid Hydrogen Indirect Cooling System (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

Design and Analysis of a Revolving Armature type Axial Flux High-Temperature Superconducting Motor (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Design and Characteristics Analysis of a Laboratory Electromagnet applying HTS Coils (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Design and Development of Curved CCT Dipole Magnets for a Proton Therapy Gantry (in session "TUE-PO1-402 Magnets for Medical App I")

Design and Digital Twin of INFN’s main Nb3Sn 15T Dipole for CERN’s FCC (in session "TUE-PO1-110 High Field Accelerator Magnets I: Nb3Sn")

Design and experiment of the conduction cooled superconducting magnet for crystal growth application (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Design and experimental investigations on the helium circulating cooling system operating at around 20 K for a 10-Mvar class HTS dynamic synchronous condenser (in session "FRI-OR7-801 Cryogenics")

Design and field performance of the octupole magnet with skew quadrupole component in HEPS (in session "THU-PO3-117 Resistive acclerator magnets II")

Design and Manufacture of two High Gradient Quadrupoles based on Permanent Magnets for the Antiproton Decelerator (in session "WED-PO2-114 Particle Detector Magnets")

Design and manufacturing of a KIT sample for a Quench Experiment on HTS Cable in Conduit Conductors (in session "WED-PO2-204 Fusion IV: HTS conductors and coils")

Design and optimization of combined-function quadrupole-sextupole magnets (in session "TUE-PO1-LN1 Late News I")

Design and optimization of the superconducting quadrupole magnet Q1a in CEPC interaction region (in session "TUE-PO1-106 Accelerator Magnets IV: HTS")

Design and Performance for Wireless Power Charging Module combined with HTS Resonance Coils under Different Frequency Ranges in Superconducting MAGLEV Trainv (in session "TUE-PO1-509 Maglev and Levitation I")

Design and Preliminary Experiments of Rotating Armature Partial Superconducting Air Core Generator (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Design and quench analysis for transparent superconducting solenoids for the Innovative Detector for Electron-positron Accelerators at the lepton Future Circular Collider (in session "TUE-OR1-102 Magnets for accelerator science and particle physics")

Design and Quench Analysis of a Cryogen-Free Superconducting Magnet for 170-GHz Gyrotron (in session "THU-PO3-LN2 Late News II")

Design and Simulation of a 150 kVA Single-Phase HTS Transformer with 1G/2G Hybrid HTS Tapes (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Design and structural assessment overview of the DTT TFC system (in session "WED-OR3-201 Fusion Magnets I")

Design and study of a new type of series active filter for the 10MW-level high power and high stability DC power supply (in session "THU-PO3-803 Current supply, regulation & cryogenic power electronics")

Design and Test of a Bended Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System (in session "TUE-PO1-402 Magnets for Medical App I")

Design and Test of a half-aperture Canted-Cosine-Theta multipole Prototype Magnet For the HIAF Fragment Separator (in session "THU-PO3-108 Accelerator Magnets VI: LTS")

Design and test of a rotating magnetic field measurement system based on PCB technique (in session "TUE-PO1-LN1 Late News I")

Design and Test of a Superconducting Lens for an Ultra-Stable Electron Microscope (in session "WED-OR3-503 Magnet System, Novel and Other Applications")

Design and test results for a canted-cosine-theta dipole subscale magnet series (in session "WED-OR2-703 Mechanical Behavior and Coil Tests")

Design considerations for practical very high field cryogen-free superconducting magnets: 33 T and beyond (in session "THU-OR5-301 High Field Magnet")

Design method of active shield coils of steering magnet for fine tuning of muon injection orbit in muon storage magnet of g-2/EDM precision measurement (in session "THU-PO3-713 Magnetization and Field Quality I")

Design of 6T superconducting solenoid system for spin polarization control at NICA collider (in session "WED-PO2-107 Accelerator Magnets V: LTS")

Design of 10MJ toroidal field D-type superconducting energy storage magnet (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Design of a 14T cryogen-free physical property measurement system magnet (in session "WED-PO2-403 Magnets for Medical App II")

Design of a Bifilar HTS Switching Element Using Iron-Core Field Coils (in session "WED-OR3-503 Magnet System, Novel and Other Applications")

Design of a Cryogen-free 6 T 320 mm All-REBCO MRI Magnet (in session "THU-PO3-404 Magnets for MRI")

Design of a Curved Superconducting Combined Function Bending Magnet Demonstrator for Hadron Therapy (in session "THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications")

Design of a double aperture Canted-cosine-theta orbit corrector for the High Luminosity LHC (in session "TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi")

Design of a full Superconducting 35 T Magnet with a 20 T REBCO Insert (in session "THU-OR5-301 High Field Magnet")

Design of a helium-liquid hydrogen based indirect cooling system for an HTS coil cooling (in session "THU-PO3-802 Cryostats and Cooling systems")

Design of a large aperture Canted Cosine Theta (CCT) combined function curved superconducting bending magnet (in session "WED-PO2-107 Accelerator Magnets V: LTS")

Design of a new type of power supply similar to flat-top pulsed high magnetic fields (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Design of a strong X-Y coupling beam transport line for J-PARC muon g-2/EDM experiment (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Design of an Active Power Compensator for 60T Flat-top High Magnetic Field System (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Design of CCT6: a large-aperture, 12 T, Nb3Sn Dipole Magnet (in session "TUE-PO1-110 High Field Accelerator Magnets I: Nb3Sn")

Design of DC Magnet for Super-X Test Facility (in session "THU-OR5-301 High Field Magnet")

Design of Pulsed Magnet for Adjusting the Residual Stress Field in Large-size Aluminum Alloy Rings (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Design of Pulsed Power Supply for Repetitive Pulsed High Magnetic Field for Water Electrolysis (in session "THU-PO3-LN2 Late News II")

Design of Quench Protection System for K-DEMO TF Magnet (in session "THU-PO3-205 Fusion V: Toward DEMO")

Design of the Fermilab Pre-Series Cold Mass for the HL-LHC Accelerator Upgrade Project (in session "THU-PO3-112 HL-LHC Accelerator Magnets II: Nb3Sn")

Design optimization and fabrication of HTS magnet with stepped cross-section (in session "TUE-PO1-722 Model Coil I")

Design Study of 3φ-10 MVA-6.9/1.0 kV REBCO Superconducting Transformers with Lightweight and Current-Limiting Function for an E-aircraft Propulsion System (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Design study of superconducting TF coil concept with rectangular conductor layer winding with high manufacturability and insulation reliability for JA DEMO (in session "WED-OR3-201 Fusion Magnets I")

Design, Construction, and Testing of 0.5-m-long, 18-mm Period Nb3Sn Superconducting Undulator Magnets (in session "TUE-OR1-102 Magnets for accelerator science and particle physics")

Design, fabrication and test of a 300MHz conduction-cooled NMR superconducting magnet (in session "THU-PO3-405 Magnets for NMR")

Design, fabrication and testing of a coated superconductor magnet for electrodynamic suspension (in session "WED-PO2-510 Maglev and Levitation II")

Design, Fabrication, and Testing of a 1.9 m Long, 16.5 mm Period NbTi Superconducting Undulator for the Advanced Photon Source Upgrade (in session "WED-PO2-105 Accelerator Magnets III: undulators and related magnets")

Design, Manufacture and Measurement of three Permanent Magnet Dipoles for FASER Experiment (in session "WED-PO2-116 Resistive acclerator magnets I")

Design, manufacture and test of ReBCO CICC for CFETR (in session "FRI-OR6-603 High Tc Wires and Cables II")

Designing a Large-gap Superferric Dipole Magnet for CEE (in session "WED-PO2-114 Particle Detector Magnets")

Designing a Magnetic Measurement Data Acquisition and Control System with Reuse in Mind: A Rotating Coil System Example (in session "TUE-PO1-720 Design & Diagnostics")

Designing and Manufacturing of REBCO-based Al-slotted core Cable-In–Conduit Conductors for quench experiments (in session "FRI-OR6-603 High Tc Wires and Cables II")

Designing and Manufacturing of the Fully Configured Multiplet for the Super-FRS at FAIR (in session "THU-PO3-108 Accelerator Magnets VI: LTS")

Detecting quench in HTS conductors with LTS conductors — a theoretical and numerical analysis (in session "TUE-PO1-705 Quench Detection I")

Developing a Vacuum Pressure Impregnation Procedure for CORC® Wires (in session "FRI-OR6-603 High Tc Wires and Cables II")

Development and preliminary test of Aluminum stabilized Stack ReBCO Tape Cable (in session "TUE-PO1-606 High Tc Wires and Cables III")

Development of a 120-mm aperture Nb3Sn dipole coil with stress management (in session "TUE-PO1-110 High Field Accelerator Magnets I: Nb3Sn")

Development of a AC Loss Model for the ITER CS Coils (in session "TUE-PO1-203 Fusion III: ITER")

Development of a demountable joint for NUCLOTRON type cable (in session "WED-PO2-613 Joints between Superconductors")

Development of a persistent-mode 400 MHz (9.39 T) LTS/Bi2223 NMR magnet with a Bi2223 superconducting joint (in session "THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications")

Development of A Prototype Kicker Magnet for Beam Distribution System of SHINE (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Development of a Simple Measurement System for Electromechanical Performance Evaluation of REBCO Coated Conductor Tapes (in session "THU-PO3-717 Mechanical Behavior of Conductor")

Development of a small-aperture cos-theta dipole insert coil based on Bi2212 Rutherford cable and stress management structure (in session "FRI-OR7-303 HTS coil II")

Development of an Iron-Based Superconductor Magnet: A Study on the 64 mm Diameter Iron-based Superconductors Coils (in session "WED-PO2-723 Moel Coil II & Test Facilities")

Development of Bi-2223 magnet for magnetic refrigeration system (in session "WED-OR3-503 Magnet System, Novel and Other Applications")

Development of CaKFe4As4 bulks by spark plasma sintering method (in session "THU-PO3-612 Bulk Magnets")

Development of DC Superconducting Cable with Magnetic Energy Storage Function for Compensating Power Fluctuation from Renewable Energy Sources (in session "FRI-OR7-502 SMES, Superconducting Transformers, Cables and Bulks")

Development of HTS conductor for the central solenoid of compact fusion reactor TRT (in session "FRI-OR7-303 HTS coil II")

Development of Hybrid Multipole Permanent Magnet for High-Intensity Beam Transportation (in session "TUE-PO1-115 Permanent accelerator magnets")

Development of Induction Heating Device Using HTS Magnet in Aluminum Extrusion Processing (in session "WED-PO2-505 Special Purpose magnets II: Induction Heating, Magnetic Refrigeration & other applications")

Development of large-scale numerical electromagnetic field analysis model for SCSC cables (in session "WED-PO2-712 Losses in HTS conductors")

Development of magneitc field mapping system for MuSEUM experiement with high precision using CW-NMR probes (in session "THU-PO3-713 Magnetization and Field Quality I")

Development of magnetic system for bending electron beam in industrial accelerator ILU-10 (in session "THU-PO3-117 Resistive acclerator magnets II")

Development of MgB2 superconducting wires at Sam Dong Co., Ltd. (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

Development of novel magnetic separation for paramagnetic particles using the selection tube (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Development of quench analysis model for single copper–plated multifilament coated conductor (in session "TUE-PO1-708 Quench Analysis II")

Development of Radiation-Resistant Warm Magnets using Cyanate Ester Resin (in session "WED-PO2-116 Resistive acclerator magnets I")

Development of ReBCO Insert Solenoids for Its High Field Application Performance Verification (in session "WED-OR2-302 HTS coil I")

Development of static magnetic refrigeration system using multiple high-temperature superconducting coils (in session "WED-PO2-505 Special Purpose magnets II: Induction Heating, Magnetic Refrigeration & other applications")

Development of superconducting joints between bronze-route Nb3Sn multifilamentary wires for persistent-mode operation (in session "THU-PO3-404 Magnets for MRI")

Development of superconducting magnetic energy storage for the power system of the particle accelerators Booster and Nuclotron of NICA (in session "FRI-OR7-502 SMES, Superconducting Transformers, Cables and Bulks")

Development of the “Demo4” 1.5m-scale spherical tokamak HTS magnet demonstrator at Tokamak Energy (in session "WED-OR3-201 Fusion Magnets I")

Developments of a Pulse Kicker System for the Three-Dimensional Spiral Beam Injection of the J-PARC Muon g-2/EDM Experiment (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Dimensional Changes Measurement of Nb3Sn Cables and Strands during Heat Treatment Using Digital Image Correlation (in session "THU-OR5-601 A15-type Superconducting Wires and Cables")

Dipole magnets wound using YBCO cables - FEM stability issues modeling (in session "THU-PO3-109 Accelerator Magnets VI: model analysis, impregnation")

Discussion (in session "Plenary: Young Scientist Plenary")

Distributed fiber optic sensing to identify locations of resistive transitions in REBCO conductors and magnets (in session "WED-PO2-721 Novel Diagnostics")

DTT: a challenging framework for a sound superconducting magnets design (in session "WED-OR3-201 Fusion Magnets I")

Dynamic characteristics of a fully HTS magnetic bearing under harmonic excitation (in session "THU-PO3-511 Maglev and Levitation III")

Dynamic loss and magnetization loss of HTS coated conductors with magnetic substrate (in session "WED-PO2-712 Losses in HTS conductors")

Dynamic magnetic hysteresis modeling based on improved parametric magneto-dynamic model (in session "WED-PO2-718 Design and Analysis I")

Dynamic resistance and dynamic loss of the partially coupled quasi-isotropic cable with consideration of the resistance at terminals (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Dynamic Response of HTS Pinning Maglev System Under High Frequency Excitation (in session "WED-PO2-510 Maglev and Levitation II")

Dynamic Simulation on Flow Characteristics of KSTAR PF Magnet Cryogenic Network (in session "WED-OR3-702 Magnetization and Loss")

Dynamics of magnetic flux during CC-tapes local magnetization (in session "THU-PO3-511 Maglev and Levitation III")

Effect of 2 and 10 MeV Au-ion irradiation on superconducting properties in GdBa2Cu3Oy coated conductors (in session "WED-PO2-607 Coated Conductor Processing and Flux Pinning")

Effect of current-sharing and heat capacity of metal core on quench protection of spiral coated conductors (in session "THU-PO3-LN2 Late News II")

Effect of different bending diameters on the current-carrying capacity of iron-based superconducting tapes (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

Effect of Different Impregnation Materials on Electromechanical Behaviors of Superconducting Compact Cables (in session "THU-PO3-710 Stability")

Effect of precursor film thickness and heat-treatment temperature on superconducting joint (in session "WED-PO2-613 Joints between Superconductors")

Effect of rare earth substitution on the structural, electrical and magnetic properties on the piezoelectric A1-xSrxTiO3 system (in session "TUE-PO1-615 Structural Materials for Magnets")

Effect of the sub-elements layout on the electro-mechanical properties of high Jc Nb3Sn wires under transverse load (in session "WED-PO2-604 Low Tc Wires and Cables")

Effect of transverse compressive stress on Nb3Sn Rutherford cables for accelerator magnets (in session "WED-PO2-604 Low Tc Wires and Cables")

Effect of Twisting Characteristics on Critical Current of Bi-2212 superconducting wire (in session "WED-PO2-610 High Tc Wires and Cables IV")

Effect on temperature dependence for long-term stable control of the magnetic field at sub-ppm using superconducting magnet for MRI (in session "THU-PO3-713 Magnetization and Field Quality I")

Effects of Friction Force on the Stress-Strain Characteristics of a High-Temperature Superconducting Coil Co-Wound Using Intentionally Scratched Stainless Steel and GdBCO Tape (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

Effects of thermal cycle and winding tension on contact resistivity of an intra-Layer No-Insulation (LNI) REBCO coil (in session "TUE-PO1-722 Model Coil I")

Electrical and Thermal Contact Resistance in ReBCO Stacks and Cables with Modified Surfaces (in session "WED-PO2-613 Joints between Superconductors")

Electrical Characteristics of a High-Temperature Superconducting Coil Insulated with Doped Smart Materials (in session "WED-PO2-616 Electrical Insulation for Magnets")

Electromagnetic Analysis of DTT Central Solenoid and Poloidal Field coils (in session "WED-PO2-718 Design and Analysis I")

Electromagnetic Characteristics of a Bitter-like HTS Magnet Excited by Flux Pump with Thermal Switch (in session "THU-PO3-617 Other Components for Magnets")

Electromagnetic characteristics of two-tape co-winding REBCO coil including local defects (in session "TUE-PO1-722 Model Coil I")

Electromagnetic Design and Performance Analysis of a Hybrid-Type Superconducting Fault Current Limiter in Shipboard MVDC IPS (in session "THU-PO3-512 SFCL")

Electromagnetic Design of a 6 T Cos-theta Fast Cycling Dipole Model (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Electromagnetic Design of a Novel HTS Linear Synchronous Motor for Electromagnetic Launching (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Electromagnetic design of the superconducting magnet for a compact heavy-ion synchrotron (in session "TUE-PO1-402 Magnets for Medical App I")

Electromagnetic performance comparison between heteropolar and homopolar six-pole hybrid magnetic bearings (in session "THU-PO3-511 Maglev and Levitation III")

Electromagnetic Shielding Technique for No-insulation Superconducting Rotor Windings in Electrical Aircraft Propulsion (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Electromagnetic-structural analysis of a superconducting magnet with active shielding for a rotating gantry (in session "TUE-PO1-402 Magnets for Medical App I")

Energization and Magnetic Field Mapping Results of Cold Iron Quadrupole Triplet for Vertical Pre-Separator of the Facility for Rare Isotope Beams (in session "WED-PO2-107 Accelerator Magnets V: LTS")

Energization waveform for reducing Screening Current-induced Magnetic Field in No-Insulation REBCO Coil Systems (in session "TUE-PO1-714 Magnetization and Field Quality Ⅱ")

Energy efficiency of resistive high field magnets – the role of magnet technology and power supply operation (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Engineering and Structural Assessment for the updated design of the DTT Central Solenoid (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Engineering design of a large aperture 15 T cable test facility dipole magnet (in session "THU-OR5-301 High Field Magnet")

Engineering the main structures of the DEMO fusion reactor magnet system (in session "THU-PO3-205 Fusion V: Toward DEMO")

Enhanced Thermal and Electrical Properties of GdBCO Magnets Impregnated with Epoxy Composites Containing Various Fillers (in session "THU-PO3-710 Stability")

Enhancement of magnetic flux distribution using roundly stacked-HTS tape (in session "THU-PO3-LN2 Late News II")

Estimation of the Cool-Down Speed under the SHe inlet condition in JT-60SA CS module (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Evaluation for Critical Current of REBCO coated conductor under various tensile strains and magnetic field angles. (in session "TUE-PO1-609 Stability and Mechanical Properties")

Evaluation of critical currents in Rutherford cables made of quasi-isotropic strands (in session "TUE-PO1-606 High Tc Wires and Cables III")

Evaluation of eddy currents dependent on excitation pattern in design of pulse electromagnets. (in session "THU-PO3-117 Resistive acclerator magnets II")

Evaluation of magnetic field dependence of interface resistivity in REBCO tape with the contact-probing current transfer length method (in session "WED-PO2-613 Joints between Superconductors")

Evaluation of magnetic properties of REBCO wire by modified SST for cryogenics (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Evaluation of mass production results of cryogenic structural stainless steels for ITER toroidal field coil (in session "TUE-PO1-615 Structural Materials for Magnets")

Evaluation of operating characteristics of coils wound with no-insulation REBCO bundle conductor for SMES (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Evaluation of Selection Criteria for the Level of Liquid Nitrogen in HTS Magnet System (in session "WED-PO2-616 Electrical Insulation for Magnets")

Evaluation of the screening current effect in an all-superconducting high-field magnet (in session "FRI-OR6-701 Design and Analysis")

Evaluation of the thermal performance of the SC Feeders for the magnetic system of the Divertor Tokamak Test facility (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Examination and Characterization of Physical and Mechanical Properties of the ITER Central Solenoid Module Coils (in session "TUE-PO1-203 Fusion III: ITER")

Experiment and analysis of spatial electromagnetic and thermal behaviors during quench propagation in no-insulation HTS coil with multi-physics distributed-circuit approach (in session "THU-PO3-707 Quench Analysis I")

Experimental analysis of quench behavior in a Cable-In-Conduit-Conductor cooled by stagnant superfluid helium (in session "THU-OR4-704 Stability and Quench")

Experimental and Comparative Study of Noise Vibrations and Harshness of Permanent Magnet Machines according to Rotor Eccentricity with Two Different Fractional Pole/Slot Combinations (in session "THU-PO3-719 Design and Analysis II")

Experimental Evaluation of Current Distribution in Three-Strand Transposed Parallel Conductors Composed of REBCO Superconducting Tapes (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Experimental Research on the Translational Characteristics of High Temperature Superconducting Translational System (in session "THU-PO3-511 Maglev and Levitation III")

Experimental Study on Effectiveness of Different Reinforcement Layouts Applied to Recent Bi-2212 Test Coils (in session "FRI-OR7-303 HTS coil II")

Experimental study on quench protection method for HTS coil that uses Cu tape co-wound with HTS tape (in session "TUE-PO1-705 Quench Detection I")

Experimental Study on the Accuracy of the Proposed LFAC Method for Measuring the Contact Resistance of NI HTS Coils (in session "TUE-PO1-722 Model Coil I")

Experimental test and characteristic analysis of a real scale HTS coil for 10 MW HTS generator using performance evaluation system (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Fabrication and Characteristics of HTS Racetrack Pancake Coils after Impregnation Process Using Various Materials (in session "WED-PO2-616 Electrical Insulation for Magnets")

Fabrication and characterization of BSCCO-2223 tape based compact coils (in session "TUE-PO1-305 HTS/LTS coil")

Fabrication and Power Test of last MCBXFB Magnets (in session "WED-OR2-103 HL-LHC Accelerator Magnets I")

Fabrication and Test of a 1.5 T Cryogen-Free HTS Magnet for the Heavy Ion Spectrometer (in session "TUE-PO1-106 Accelerator Magnets IV: HTS")

Fabrication and Test of a 1:4 Scaled HTS Coil for the Defocusing Magnet of a 2 GeV FFAG Accelerator (in session "TUE-PO1-106 Accelerator Magnets IV: HTS")

Fabrication of all c-grown RE123 melt-textured bulks with homogeneous trapping field distributions using Single-Direction Melt Growth method (in session "THU-PO3-612 Bulk Magnets")

Fabrication of magnetic field shielding film using YBa2Cu3O7-δ powder (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Fabrication of Racetrack Type Double-pancake Coils Using 2G Tapes (in session "TUE-PO1-722 Model Coil I")

Fabrication of the Fermilab Pre-Series Cold Mass for the HL-LHC Accelerator Upgrade Project (in session "THU-PO3-112 HL-LHC Accelerator Magnets II: Nb3Sn")

Factory acceptance test and delivery of the first two poloidal field coils to ITER fusion facility (in session "TUE-PO1-203 Fusion III: ITER")

Fault Current Limiting Operations of Three-Phase Transformer Type SFCL using Secondary Windings with Closed Loop (in session "THU-PO3-512 SFCL")

Feasibility of different cryogenic systems for ReBCO coils based high-dynamic superconducting actuators (in session "FRI-OR7-801 Cryogenics")

Feasibility Study of GaToroid Gantries for Carbon Ions (in session "THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications")

Feasibility Study of ITER In-Vessel Coils Bracket Manufacture and Integration (in session "TUE-PO1-203 Fusion III: ITER")

Feasibility study of novel rapid ramp-down procedure in MgB2 MRI magnet using persistent current switch with high off-resistivity (in session "THU-PO3-404 Magnets for MRI")

Feasibility Study of Thyristor Rectifier with Unity Power Factor for Superconducting Magnet in Tokamak (in session "THU-PO3-803 Current supply, regulation & cryogenic power electronics")

Feasibility Study on a Real-Scale High-Frequency Electromagnets for Magnetic Hyperthermia Base on a Magnetic Scaling Law (in session "TUE-PO1-402 Magnets for Medical App I")

Feasibility Study on CCT Magnet Design based on Narrow-Stacked HTS wire (in session "TUE-PO1-305 HTS/LTS coil")

Features of the formation of pinning centers in HTS tapes under the laser irradiation action (in session "WED-PO2-607 Coated Conductor Processing and Flux Pinning")

FEM modeling of superconducting whole body, actively shielded 7 T MRI magnets wound using Nb3Sn strands (in session "THU-PO3-404 Magnets for MRI")

Fermilab’s Horizontal Test Stand Cryogenic System Upgrade and Commissioning (in session "THU-PO3-802 Cryostats and Cooling systems")

Fermilab’s Horizontal Test Stand Upgrade Overview and Commissioning (in session "THU-PO3-112 HL-LHC Accelerator Magnets II: Nb3Sn")

Field Quality Measurements of High-Temperature Superconducting Canted Cosine Theta Accelerator Magnets (in session "WED-OR3-702 Magnetization and Loss")

Field quality of the 4.5 m long MQXFA pre-series magnets for the Hi-Lumi LHC Upgrade as observed during magnet assembly (in session "TUE-PO1-714 Magnetization and Field Quality Ⅱ")

Fine tuning of the inner dipole design of MCBXF magnets (in session "TUE-PO1-720 Design & Diagnostics")

Finite Element Analysis of AC Loss Properties in Pancake Coils Wound Using Two-ply Bundle Conductor (in session "TUE-PO1-305 HTS/LTS coil")

First canted cosine theta Bi-2212 accelerator magnets: Fabrication, performance, and prospects (in session "WED-PO2-111 High Field Accelerator Magnets II: Hybrid and HTS")

First NMR Relaxometry using Outer Field of Single-sided HTS Bulk Magnet activated by Pulsed Field (in session "THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications")

First NMR Signal Detection on Single-sided Magnetic Pole Surface Containing HTS Bulk Magnet Activated by Pulsed Field (in session "THU-PO3-405 Magnets for NMR")

Flex-PCB quench antenna developments at FNAL (in session "WED-PO2-721 Novel Diagnostics")

Flux Concentrator Optimization for Future Positron Sources (in session "TUE-OR1-304 Resistive and Pulsed High-Field Magnets")

Flux Creep in Bi:2212 Rutherford Cables for Particle Accelerator Applications (in session "TUE-PO1-714 Magnetization and Field Quality Ⅱ")

Flywheel uninterruptible power supply using superconducting induction machine (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Force Characteristic Analysis of Active EDS System Under Different Control Currents (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Formation of Nb3sn after Different Mechanical Alloying Methods (in session "WED-PO2-613 Joints between Superconductors")

Fundamental research for design of composite materials in vacuum environments (in session "WED-PO2-616 Electrical Insulation for Magnets")

Further analysis of the mechanical and thermal properties of ice in the ice impregnated high temperature superconducting coils (in session "TUE-PO1-305 HTS/LTS coil")

Further Development of the W7-X Magnet System FE Global Model in Preparation for Enhanced Operation Phase (in session "THU-OR4-202 Fusion Magnets II")

Gas-cooled Peltier current leads for compact HTS devices (in session "THU-PO3-614 Current Leads")

Heat Treatment Optimization on Nb3Sn Strands Based on Electrical and Physical Properties (in session "THU-PO3-205 Fusion V: Toward DEMO")

High electric conductivity and optimum strength in cold-drawn CuCrZr alloys at 295K and 77K (in session "TUE-OR1-304 Resistive and Pulsed High-Field Magnets")

High Performance HTS Conductors for Compact Fusion Tokamak Facility (in session "WED-PO2-204 Fusion IV: HTS conductors and coils")

High performance switch design for HTS transformer rectifier type flux pump (in session "TUE-PO1-804 Flux pumps")

High temperature superconducting magnet wireless power transmission technology based on flux pump (in session "TUE-PO1-804 Flux pumps")

High Temperature Superconducting Non-insulation Closed-loop Coils for Electro-dynamic Suspension System (in session "WED-PO2-510 Maglev and Levitation II")

High-performance simulation of the magnetic field in superconducting magnets using domain decomposition algorithms in the Sparselizard open source FEM library (in session "WED-PO2-718 Design and Analysis I")

High-temperature superconducting cable optimization design software based on 2-D electromagnetic thermal analysis model (in session "WED-PO2-718 Design and Analysis I")

Highly sensitive measurement of AC loss characteristics of short and straight HTS tapes under transverse magnetic fields by a pickup coil method (in session "WED-PO2-712 Losses in HTS conductors")

Homogenization of Winding Pack Properties for the Structural Analysis of Fusion Magnets (in session "TUE-PO1-203 Fusion III: ITER")

Hoop stress test of four-stacked two-ply REBCO pancake coils (in session "WED-OR2-302 HTS coil I")

HTS coil cooled with liquid hydrogen and fuel cell power source (in session "THU-PO3-802 Cryostats and Cooling systems")

HTS Dipole Magnet Model for the Persistent Current Operation (in session "TUE-PO1-106 Accelerator Magnets IV: HTS")

Hybrid Microscopy to Clarify Failure Mechanisms of REBCO Tapes in Meter-Class Pancake-Coils (in session "FRI-OR7-303 HTS coil II")

Impact of Rotor Eccentricity and Current Harmonics on High-Speed Permanent Magnet Generator Performance for Microturbine Applications (in session "TUE-PO1-720 Design & Diagnostics")

Improve the Central Magnetic Field of an HTS Magnet with Multi Linear-Motor Flux Pumps Based on Genetic Algorithm (in session "TUE-PO1-804 Flux pumps")

Improvement of excitation delay by multiple high temperature superconducting tapes in no-insulation coil (in session "THU-PO3-719 Design and Analysis II")

Improvement of the propulsion force by the excitation principle of the propulsion coil in the permanent magnet-HTS hybrid Magnetically levitated transport system (in session "TUE-PO1-509 Maglev and Levitation I")

Improving critical current in ternary APC Nb3Sn superconductors by using internal oxidation method (in session "THU-OR5-601 A15-type Superconducting Wires and Cables")

In-field evaluation of REBCO superconducting joint (in session "WED-PO2-613 Joints between Superconductors")

Increase of thermal stability caused by high thermal conduction VFRPs in conduction-cooled HTS coils (in session "THU-PO3-710 Stability")

Increased Quench Energy Threshold in Nb3Sn Strands with High Heat Capacity (in session "TUE-PO1-708 Quench Analysis II")

Inductive Method for the Critical Current Measurements on the Aluminum stabilized cable (in session "WED-PO2-723 Moel Coil II & Test Facilities")

Industrial production of superconducting magnets for the FAIR SIS100 accelerator (in session "WED-PO2-107 Accelerator Magnets V: LTS")

Influence analysis of the geometrical parameters on the ac loss of the double sided linear HTS induction motor under various operation conditions (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Influence of Dynamic Resistance on Current Distribution of HTS Cable Conductor for Feeder lines and Large Scale Magnet (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Influence of premix condition on the microstructure and trapped field properties of MgB2 bulk magnets by Mg Vapor Transportation (MVT) method (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

Influence of reversible vortices motion on low-field features of magnetization in type-II superconductors with strong anisotropic pinning (in session "WED-PO2-604 Low Tc Wires and Cables")

Influence of Stainless Steel Shell on the 100 T Pulsed Magnet (in session "THU-PO3-LN2 Late News II")

Influence of the Stator Substrate Magnetism on the Charging Performance of Dynamo-type HTS Flux Pump (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Influence of Ti doping on the Nb3Sn layer formation for various Nb3Sn wire structure (in session "WED-PO2-604 Low Tc Wires and Cables")

Influence of Traction Rod on the Dynamic Performance of High-temperature Superconducting Maglev Vehicle (in session "WED-PO2-510 Maglev and Levitation II")

Influence of Zn addition in Cu matrix on the mechanical and superconducting properties of Nb$_3$Sn conductor (in session "WED-PO2-604 Low Tc Wires and Cables")

Innovative collaring concept for MQYY superconducting quadrupole magnets of HL-LHC Insertion Region (in session "TUE-PO1-LN1 Late News I")

Integration of Bi-2212 and Nb3Sn CCT magnets for a hybrid magnet test (in session "FRI-OR7-303 HTS coil II")

Inter-wire contact force induced critical current degradation of Bi-2212/Ag round wires reacted with and with no pre-pressure (in session "WED-PO2-610 High Tc Wires and Cables IV")

Internal strain responses of YBCO superconducting taps based using embedded and distributed FBGs under tensile，compression and bending loading (in session "WED-PO2-716 Mechanical Behavior of Coil II")

Introduction (in session "Plenary: Young Scientist Plenary")

Introduction (in session "WED-SS Special Session "Lesson learned"")

Introduction and results of the Bonding Experiments (BOX). (in session "THU-PO3-109 Accelerator Magnets VI: model analysis, impregnation")

Investigation of a novel transposed superconducting cable using REBCO coated conductors (in session "TUE-PO1-606 High Tc Wires and Cables III")

Investigation of AC Current Transmission Capacity of 2G HTS Tapes Under Different Refrigeration Conditions (in session "THU-PO3-710 Stability")

Investigation of AC Loss Characteristics of REBCO Armature Developed for 50 kW-class HTS Induction/Synchronous Motor (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Investigation of HTS Power Devices Cooled by LN2/CF4 Mixture (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Investigation of the formation mechanism of a-axis oriented grains in GdBa2Cu3Oy coated conductors deposited by pulsed laser deposition (in session "WED-PO2-607 Coated Conductor Processing and Flux Pinning")

Investigation of Transient Response caused by Power Supply on JT-60SA Central Solenoid (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Investigation on Quench and Normal Zone Propagation Behaviors of REBCO Coil wound by vanadium III oxide turn-to-turn insulator (in session "TUE-PO1-722 Model Coil I")

Investigation on thermal and electrical stabilities of REBCO coil insulated by vanadium III oxide under various disturbance environments (in session "TUE-PO1-722 Model Coil I")

Investigation on Time-Varying Behavior of No-Insulation HTS Field Coil for Synchronous Motors Considering Armature Reaction and Slotting Effect (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Investigations of stability of the second generation HTS composites under of current loads at various regimes (in session "TUE-PO1-609 Stability and Mechanical Properties")

Irradiation effect on superconductivity of REBCO coated conductors (in session "TUE-OR1-602 High Tc Wires and Cables I")

ITER Outer Vessel Steady-State magnetic sensor calibration (in session "THU-PO3-713 Magnetization and Field Quality I")

Jc performance under the transverse compressive stress on the bronze matrix reinforced Nb3Sn multifilamentary wires (in session "WED-PO2-604 Low Tc Wires and Cables")

Jelly-Roll Processed Nb3Al Super-Fine Monofilament Wires with Cu/non-Cu Ratio of 1.0 (in session "THU-OR5-601 A15-type Superconducting Wires and Cables")

Joint resistance evaluation of longer HTS tape joints with indium insertion (in session "WED-PO2-613 Joints between Superconductors")

JT-60SA TFC02 COMPLEMENTARY QUENCH TESTS IN CTF: THERMOHYDRAULICAL ANALYSIS AND SMOOTH QUENCH CRITICALITY (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Lap joint resistivity and crossover resistance of REBCO conductors and coils (in session "TUE-PO1-305 HTS/LTS coil")

Larger Levitation Force Design of Magnetic Levitation Rail based on Topology Optimization of Halbach Array (in session "WED-PO2-510 Maglev and Levitation II")

Levitation characteristics analysis of a novel bearingless switched reluctance motor (in session "THU-PO3-719 Design and Analysis II")

Levitation characteristics of high-temperature superconducting bulks under different orientations and arrays (in session "WED-PO2-510 Maglev and Levitation II")

Levitation force enhancement of a magnetic bearing using the stator of hybrid superconducting magnet (in session "THU-PO3-511 Maglev and Levitation III")

Levitation properties of magnetic attraction type levitation system having HTS bulk and HTS racetrack magnet (in session "TUE-PO1-509 Maglev and Levitation I")

Lifetime Studies of Electrolytic Capacitors Installed in the Protection Systems of the Superconducting Magnets in the Large Hadron Collider at CERN (in session "WED-PO2-706 Quench Detection II")

Long Time Thermal Stability and Radiation Resistance of Nanostructured Microcomposite Wires Based on Cu-Nb Alloy (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Long-Term Operation Results of a Stack of Metal Insulation HTS Pancake Coils for SMES Applications (in session "WED-PO2-709 No-Insulation Coils")

Low field MgB2 and NbTi fast ramped coils: temperature behaviours empirical comparison. (in session "TUE-PO1-711 Losses in conductors and coils")

Low resistance soldered joint of REBCO coated conductors with novel Ag-dispersed structure (in session "WED-PO2-613 Joints between Superconductors")

Low-AC-loss SCSC cable: magnetization loss measurements of spiral copper-plated multifilament coated conductors (in session "TUE-OR1-602 High Tc Wires and Cables I")

Magnet design for electron-beam additive manufacturing (in session "WED-PO2-505 Special Purpose magnets II: Induction Heating, Magnetic Refrigeration & other applications")

Magnet Design of the Electron Cooling System for HIAF (in session "THU-PO3-117 Resistive acclerator magnets II")

Magnet development for the BESSYIII multi bend achromat (in session "THU-PO3-117 Resistive acclerator magnets II")

Magnetic alignment and mechanical analysis of superconducting bending section for proton therapy (in session "TUE-PO1-402 Magnets for Medical App I")

Magnetic and Electromechanical Characterization of a High-Jc RRP wire for the MQXF Cable (in session "WED-PO2-604 Low Tc Wires and Cables")

Magnetic Design of the EIC IR Cable Magnets (in session "THU-PO3-108 Accelerator Magnets VI: LTS")

Magnetic Designs of New First Target Beamline Magnets for the ORNL SNS Upgrade (in session "THU-PO3-117 Resistive acclerator magnets II")

Magnetic field distribution on a 400 MHz all-REBCO at 20mm DSV and multi-layered ferromagnetic shimming (in session "THU-PO3-405 Magnets for NMR")

Magnetic Field Reduction Phenomenon of a Metal Insulation and a No-insulation Coil by External Fluctuating Magnetic Field (in session "WED-PO2-616 Electrical Insulation for Magnets")

Magnetic Field Shielding with Superconductors (in session "WED-PO2-107 Accelerator Magnets V: LTS")

Magnetic flux trapping and creep in 2G HTS wires containing normal-phase fractal clusters (in session "WED-PO2-607 Coated Conductor Processing and Flux Pinning")

Magnetic Measurement and Cold Test Results of the Mu2e Transport Solenoid Coils (in session "WED-PO2-114 Particle Detector Magnets")

Magnetic Measurements of HL-LHC AUP Cryo-Assemblies at Fermilab (in session "TUE-PO1-714 Magnetization and Field Quality Ⅱ")

Magnetic measurements of a full-scale prototype of the HL-LHC beam separation dipole (in session "TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi")

Magnetic Measurements on the Twin Aperture Orbit Correctors for HL-LHC at IMP (in session "TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi")

Magnetic Measurements Results and Analysis of the First Batches of Superferric Magnets for the HL-LHC High Order Field Correction (in session "WED-OR3-702 Magnetization and Loss")

Magnetization and Hysteresis Losses in HTS Coated Conductors in Magnetic Field of Various Orientation (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Magnetization Loss of no-insulation high temperature superconductor coil exposed to background fields (in session "TUE-PO1-711 Losses in conductors and coils")

Magnetization measurements of Bi-2212 Rutherford cable using a ± 3-T magnetometer (in session "WED-PO2-610 High Tc Wires and Cables IV")

Magnetization Relaxation by Shielding Current in Commercial REBCO Tapes (in session "WED-OR3-702 Magnetization and Loss")

Magneto-Mechanical Optimization of Cross-sections for cos $\theta$ Accelerator Magnets (in session "WED-PO2-111 High Field Accelerator Magnets II: Hybrid and HTS")

Magnetothermal Coupling Analysis of Claw Pole Machine using Combined Magnetic and Thermal Network Method (in session "THU-PO3-719 Design and Analysis II")

Magnets for Ion Transfer Line from the Booster to the Nuclotron for the NICA project (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Manifestation of electromagnetic performance degradation of Nb3Sn cable-in-conduit conductor in the change of its mechanical structure (in session "THU-PO3-611 Cable-in-Conduit and Other Internally Cooled Conductors")

Manufacture of the Proton Electron Radiation Channel (PERC) installed at the Research Neutron Source FRM II (in session "WED-PO2-114 Particle Detector Magnets")

Manufacturing of ITER PF2-6 Coil (in session "TUE-PO1-203 Fusion III: ITER")

Manufacturing technologies for cost effective HTS coils and magnet systems (in session "WED-OR3-503 Magnet System, Novel and Other Applications")

MATLAB Implementation of Optimized HTS Transformer-Rectifier Flux Pump Using HTS Dynamic Voltage Switches (in session "TUE-PO1-804 Flux pumps")

Measurement and Analyses of In-field Critical Currents in Multi-Filamentally Bi-2223 Tapes at Ultra-Low Electric-Field Criterion Down to at around 10^-13 V/m (in session "FRI-OR6-603 High Tc Wires and Cables II")

Measurement of AC loss characteristics of HTS sample coils under the conditions assumed for use in power electronics devices (in session "TUE-PO1-711 Losses in conductors and coils")

Measurement of irreversible external-compressive strain and minimization of reversible bending radius on MgB2 multifilament wire (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

Measurements of AC loss evolution in ITER TF Conductors (in session "THU-OR5-601 A15-type Superconducting Wires and Cables")

Mechanical Analysis of a 14 T Whole-Body MRI Magnet (in session "WED-OR2-703 Mechanical Behavior and Coil Tests")

Mechanical and electromechanical behavior of REBCO coated conductors under combined tensile-bending deformation (in session "TUE-PO1-609 Stability and Mechanical Properties")

Mechanical and seismic performance analysis of the dewar used for helium gas tightness test for CFETR conductor (in session "WED-PO2-723 Moel Coil II & Test Facilities")

Mechanical and thermal analysis of an HTS superconducting magnet for an achromatic gantry for proton therapy (in session "THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications")

Mechanical and thermal properties of glass fiber-filled thermos-plastic materials for magnet and cryogenic applications (in session "THU-PO3-617 Other Components for Magnets")

Mechanical characterisation of Nb3Sn cable insulation systems at ambient and cryogenic temperature used for HL-LHC accelerator magnets. (in session "WED-PO2-616 Electrical Insulation for Magnets")

Mechanical characterization of Glass Fiber Reinforced Polymers (GFRP) and resins submitted to ionizing radiations for future accelerator application (in session "THU-PO3-109 Accelerator Magnets VI: model analysis, impregnation")

Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb3Sn Low-β Quadrupole MQXF (in session "TUE-PO1-LN1 Late News I")

Mechanical Design of the Mirror Structure for the full-length Nb3Sn Sextupole Coil of 45 GHz ECR Ion Source (in session "WED-PO2-716 Mechanical Behavior of Coil II")

Mechanical Design of the Nb3Sn Cos-theta Short Model Dipole for the Future Circular Collider (in session "TUE-PO1-110 High Field Accelerator Magnets I: Nb3Sn")

Mechanical properties and strain effect of various Nb3Al superconducting wires (in session "WED-PO2-604 Low Tc Wires and Cables")

Mechanical strength evaluation of Yoroi-coil structured non-circular REBCO pancake coil in high magnetic field (in session "WED-OR2-703 Mechanical Behavior and Coil Tests")

Mechanical stress simulation of REBCO tapes using particle methods (in session "THU-PO3-717 Mechanical Behavior of Conductor")

Mechanical validation of the Combined Support Structure for FECR Nb3Sn Superconducting Magnet Prototype (in session "WED-PO2-716 Mechanical Behavior of Coil II")

Metal-as-Insulation HTS Insert for Very-High-Field Magnet: A Test Report after Repairment (in session "WED-OR2-302 HTS coil I")

Method of Manufacturing Fast Ramping Non-Insulated HTS Pancake Coils (in session "WED-OR2-703 Mechanical Behavior and Coil Tests")

Methods of Estimating AC Losses in Multi-filamentary Superconducting Windings with Spatial and Time Harmonics (in session "THU-OR5-501 Superconducting Rotating Machine, Levitation and Flywheel")

Metrology in process control for the European Toroidal Field Coil project (in session "TUE-PO1-203 Fusion III: ITER")

Microanalysis of Glidcop® conductor, an alumina particle dispersion strengthened copper, for ultrahigh field pulsed magnet applications (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Microstructure and superconducting properties of Hf,Ta-added bronze-route Nb3Sn wire (in session "WED-PO2-604 Low Tc Wires and Cables")

Minimizing the heat losses of a self-switching kA-class rectifier flux pump (in session "TUE-PO1-804 Flux pumps")

Minimum Quench Energy of Nb3Sn Wires and Rutherford Cables with High Specific Heat (in session "THU-PO3-710 Stability")

Minimum Quench Energy of NbTi and Nb3Sn Conductors Impregnated with High Heat Capacity Resin (in session "THU-PO3-710 Stability")

Mitigation of non-uniform current distribution in bulk high-temperature superconducting rings for the generation of NMR-grade magnetic fields (in session "THU-PO3-612 Bulk Magnets")

Modeling of AC loss characteristics under electromagnetic conditions in High-temperature superconducting cable (in session "WED-PO2-610 High Tc Wires and Cables IV")

Modeling of screening currents in superconducting non-insulated REBCO magnets: fast and accurate 2D approach (in session "WED-OR3-702 Magnetization and Loss")

Modeling stabilizer and superconducting inhomogeneities of commercial REBCO tapes with a 1-D electro-thermal model (in session "FRI-OR6-701 Design and Analysis")

Modelling and Investigation on the AC loss of the 2G YBCO tape influenced by High-order power harmonics (in session "THU-PO3-719 Design and Analysis II")

Modelling and mitigation of quench risk for a NI HTS MRI brain magnet (in session "THU-PO3-404 Magnets for MRI")

Modelling of magnetization loss of CORC cables with three material laws and comparison with measurements (in session "WED-PO2-712 Losses in HTS conductors")

Modification of critical current density properties in high-Tc superconductors by tuning columnar defect morphologies in different directions (in session "WED-PO2-607 Coated Conductor Processing and Flux Pinning")

Moving Toward Completion of manufacturing of ITER PF1 Coil (in session "THU-OR4-202 Fusion Magnets II")

Multi-Input, Long-Distance, HTS-Based Wireless Charging System for Undersea Sensor Networks (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Multi-Mode Vibration Suppression of High-Temperature Superconducting Maglev System Via Negative Resistance Electromagnetic Shunt Damper (in session "WED-PO2-510 Maglev and Levitation II")

Multi-objective Optimization Design for Null-flux Superconducting Electrodynamic Suspension Using NSGA-II and Response Surface Method (in session "WED-PO2-510 Maglev and Levitation II")

Multiphysics field topology optimization design of heat conduction structure of high-temperature superconducting magnets (in session "FRI-OR6-701 Design and Analysis")

Multiphysics study of phase transformations in Nb3Sn strands during Heat Treatment (in session "THU-OR5-601 A15-type Superconducting Wires and Cables")

Network model for REBCO pancake coils with heat transfer (in session "THU-PO3-707 Quench Analysis I")

New Methods to Reduce Fast-Ramping AC loss in High Temperature Superconductors Coils at High Currents of 500 A – 800 A (in session "WED-OR3-702 Magnetization and Loss")

NI test coil program at the Paul Scherrer Institute (in session "WED-OR2-703 Mechanical Behavior and Coil Tests")

Non-uniform screening-current-induced mechanical strains in small-scale REBCO insert coils (in session "WED-OR2-703 Mechanical Behavior and Coil Tests")

Nonlinear magnetic field analysis in superconducting accelerator magnets via a new FPM/BEM scheme, implemented in PITHIA-EM software (in session "WED-PO2-718 Design and Analysis I")

Novel HTS magnet design for nuclear fusion (in session "WED-PO2-204 Fusion IV: HTS conductors and coils")

Novel Insulation Designs for Nb<sub>3</sub>Sn Rutherford Cables for Particle Accelerator Magnets (in session "WED-PO2-616 Electrical Insulation for Magnets")

Novel magnetic systems for high power microwave sources – challenges and prospects (in session "THU-PO3-205 Fusion V: Toward DEMO")

Novel Pb- and Cd-free superconducting joint between NbTi and Nb3Sn wires using high-temperature-tolerable superconducting Nb-alloy intermedia (in session "THU-PO3-LN2 Late News II")

Numerical Analysis of 2 MW Fully Superconducting Synchronous Motor for Electric Aircraft Considering AC Loss in Field Winding (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Numerical analysis on transient stability of large helical device conductor (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Numerical evaluation of electromagnetic behavior of multi-stacked no-insulation REBCO coil system assuming applications to high-field whole-body MRIs and medical cyclotrons (in session "WED-PO2-709 No-Insulation Coils")

Numerical Evaluation of Reinforcement Structure against Electromagnetic and Thermal Stresses in Stacked REBCO Pancake Coils (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

Numerical evaluation of screening current-induced magnetic field in HTS coil system of Skelton Cyclotron for targeted alpha-particle therapy (in session "TUE-PO1-714 Magnetization and Field Quality Ⅱ")

Numerical evaluation of the potential methods of reducing screening-current-induced stress in NI-REBCO coil (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

Numerical evaluation of transient thermal stability of no-insulation pancake coil wound with REBCO coated conductor with some defects (in session "WED-PO2-709 No-Insulation Coils")

Numerical evaluation of transient thermal stability of no-insulation REBCO pancake coils with non-contact area between turns (in session "WED-PO2-709 No-Insulation Coils")

Numerical Evaluation on Mechanical Behavior of No-insulation REBCO Pancake Coils in Skeleton Cyclotron (in session "WED-PO2-403 Magnets for Medical App II")

Numerical Evaluation on Quench Behavior of REBCO Coil System of Skeleton Cyclotron for Cancer Therapy (in session "WED-PO2-403 Magnets for Medical App II")

Numerical investigation of thermoelastic coupling behaviors of stacks of high temperature superconductor during a quench (in session "TUE-PO1-708 Quench Analysis II")

Numerical Model Development for CFETR CSMC Quench Detection System (in session "WED-PO2-706 Quench Detection II")

Numerical Modeling and Optimization of an Axial-type Synchronous Motors with Bulk HTS (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Numerical Modeling for Electrical Machines with Superconducting Windings using H-A formulation (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Numerical modeling of the pulse field magnetization of the bulk array used as the field poles of a superconducting machine (in session "FRI-OR7-502 SMES, Superconducting Transformers, Cables and Bulks")

Numerical modelling and calculation of mechanical properties of HTS magnet wound with multi-thickness armored REBCO tapes (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

Numerical Modelling of AC loss in large HTS Coils (in session "WED-PO2-204 Fusion IV: HTS conductors and coils")

Numerical Modelling of the Interfacial Debonding in Superconducting Magnets (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

Numerical Optimization of Electromagnet Current Distribution in Superconducting Linear Acceleration System (in session "WED-PO2-718 Design and Analysis I")

Numerical Prediction of HTS Closed Coil Current Decay for Synchronous Motor Application (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Numerical simulation and experimental study on the composite process of electromagnetic and electro-hydraulic tube forming (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Numerical Study of Magnet Stability in the Superconducting Armature Winding for a Superconducting Generator (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Numerical study of quench behaviour in YBCO CORC cables (in session "THU-PO3-707 Quench Analysis I")

Numerical Study of Temperature Distribution within a Conduction-Cooled, MgB2 MRI Coil Segment (in session "THU-PO3-404 Magnets for MRI")

Numerical Study on AC Loss in Quasi-Isotropic Superconducting Strand at Liquid Helium Temperatures (in session "WED-PO2-712 Losses in HTS conductors")

Numerical study on dynamic characteristics of stack-type HTS Maglev system based on H-formulation (in session "TUE-PO1-509 Maglev and Levitation I")

Off-Power Operation of prototype on-board HTS Magnets for EDS-type Maglev Trains (in session "WED-PO2-510 Maglev and Levitation II")

Operation Results of a 23.5-T REBCO Magnet Prototype Towards a Tabletop Liquid-Helium-Free 1-GHz Microcoil NMR (in session "WED-OR2-302 HTS coil I")

Operation Scenario of Mobile SMES for On-Site Eigenvalue Measurement of Electric Power System (in session "FRI-OR7-502 SMES, Superconducting Transformers, Cables and Bulks")

Optical fiber based quench detection in HTS applications using feature extraction on response signal (in session "THU-OR4-704 Stability and Quench")

Optimal Design for Permanent Magnet Distribution of the Tip of Flexible Endoscope Driven by Magnetic Navigation (in session "WED-PO2-403 Magnets for Medical App II")

Optimal operating conditions of YBa2Cu3Oy HTS diode with a PrBa2Cu3Oy buffer layer (in session "THU-PO3-617 Other Components for Magnets")

Optimization design and development of septum magnet (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Optimization of the Levitation Performance for the Fully-Superconducting Magnetic Bearing (in session "THU-PO3-511 Maglev and Levitation III")

Optimization of the react and wind coil manufacturing process using MgB2 twisted cable (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

Optimized configurations for enhancing the interaction capacity between permanent magnet and superconductor coil (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Optimizing single-turn coils for scientific applications beyond 100T (in session "TUE-OR1-304 Resistive and Pulsed High-Field Magnets")

Optimum field shaper design for electromagnetic forming by balancing trade-off among energy efficiency, field distribution, and thermo-mechanical loadings (in session "TUE-PO1-LN1 Late News I")

Parametric study on starting method with fast torque response in high-temperature superconducting induction/synchronous motor (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Partial-Insulation HTS Magnet for Reduction of Quench-Induced Peak Currents (in session "THU-PO3-707 Quench Analysis I")

Performance analysis and evaluation of a hundred-kW HTS dynamic synchronous condenser prototype (in session "THU-OR5-501 Superconducting Rotating Machine, Levitation and Flywheel")

Performance of 7 T dry solenoid for THz spectroscopy (in session "WED-PO2-107 Accelerator Magnets V: LTS")

Performance of a MQXF Nb3Sn Quadrupole Under Different Stress Level (in session "WED-OR2-103 HL-LHC Accelerator Magnets I")

Performance of a test coil wound from defect-tolerant second generation cable (in session "FRI-OR6-603 High Tc Wires and Cables II")

Performance of Bipolar Correction Magnet with Permanent Magnets (in session "TUE-PO1-115 Permanent accelerator magnets")

Performance of compact wind-and-react MgB$_2$ solenoid coil made with continuously produced cable (in session "FRI-OR6-603 High Tc Wires and Cables II")

Persistent current mode operation of a cryocooler-cooled joint-less HTS magnet (in session "WED-PO2-723 Moel Coil II & Test Facilities")

Persistent Current Stabilization and Tuning of Bi-2223 HTS Coils (in session "TUE-PO1-804 Flux pumps")

Persistent Current Switch with Diode Protection and Superconducting Joint for a 5 T NbTi NMR Magnet (in session "THU-PO3-405 Magnets for NMR")

Phasing Magnet for CSX-2 beamline at NSLS-II (in session "WED-PO2-105 Accelerator Magnets III: undulators and related magnets")

Physical properties of all c-grown Gd123 bulks starting from various metal compositions (in session "THU-PO3-612 Bulk Magnets")

Potential of Superconducting Joints Connecting Bi2223 Tapes (in session "FRI-OR6-603 High Tc Wires and Cables II")

Power Test of the First Two MQXFB Quadrupole Magnets Built at CERN for the HL-LHC Low-Beta Insertion (in session "WED-OR2-103 HL-LHC Accelerator Magnets I")

Preliminary design and analysis of 20 K helium cooled MgB2 based superconducting current feeder system for Tokamak application (in session "THU-PO3-614 Current Leads")

Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO (in session "THU-PO3-205 Fusion V: Toward DEMO")

Preliminary Design of Insulation System for Superconducting Conductor Testing Facility (in session "WED-PO2-616 Electrical Insulation for Magnets")

Preliminary Design Study on HTS Toroidal Field Coils Using Non-Twisted Conductors and Cables (in session "WED-PO2-204 Fusion IV: HTS conductors and coils")

Preliminary Rotational Test of an HTS Synchronous Motor with Linear-Motor Type Flux Pump Exciters (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Preliminary strain measurement in high field superconducting magnets with fiber Bragg gating (FBG) (in session "WED-PO2-716 Mechanical Behavior of Coil II")

Preliminary structural analysis of the DTT current feeders conductors and clamps (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Preliminary study of 4 T superconducting dipoles for a light rotating gantry for ion-therapy (in session "THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications")

Primary quench detection analysis for DTT Central soledoid (CS) and polidal field coils (PF) (in session "WED-PO2-706 Quench Detection II")

Probability of premature quenching of HTS coil due to local reduction of critical current (in session "THU-OR4-704 Stability and Quench")

Procedural solutions for determining the temperature dependence of transport critical current in Nb3Sn superconducting wires using magnetization measurements (in session "WED-PO2-604 Low Tc Wires and Cables")

Processing of the quench detection signals for CS model coil of CFETR (in session "WED-PO2-706 Quench Detection II")

Progress of 2G HTS Development and Process Improvement at SuperPower (in session "TUE-OR1-602 High Tc Wires and Cables I")

Progress of the High Field Magnet Program for SPPC (in session "FRI-OR6-101 Accelerator Magnets I: HFM and others applications")

Progress on the Design of the 15 T Magnet of the EDIPO Test Facility (in session "WED-PO2-723 Moel Coil II & Test Facilities")

Progress Towards Hall Sensor-Based Quench Detection in CORC® Cables (in session "WED-PO2-721 Novel Diagnostics")

Proof-of-Principle Demonstration of a Novel Overpass/Underpass High Field Dipole (in session "WED-PO2-111 High Field Accelerator Magnets II: Hybrid and HTS")

Property of Praseodymium Permanent Magnet for Cryogenic Hybrid Magnet (in session "TUE-PO1-115 Permanent accelerator magnets")

Protection strategy and quench study of MCBXF magnets (in session "WED-PO2-706 Quench Detection II")

Pulsed field magnetization of GdBaCuO superconducting bulks with high magnetization efficiency using a split type coil with a soft iron yoke (in session "THU-PO3-612 Bulk Magnets")

Quadrupole Superconducting Model Magnet for Upgrade of the Nuclotron Synchrotron (in session "FRI-OR6-101 Accelerator Magnets I: HFM and others applications")

Quasi-3D Magneto-Thermal Quench Simulation of Superconducting Magnets (in session "FRI-OR6-701 Design and Analysis")

Quench analysis and experiment of FECR prototype Nb3Sn superconducting magnet (in session "TUE-PO1-708 Quench Analysis II")

Quench Analysis of the 9.4-T Whole-Body MRI Superconducting Magnet (in session "TUE-PO1-708 Quench Analysis II")

Quench Behaviour of Prototype HL-LHC Dipole Canted Cos-Theta Orbit Corrector Nb-Ti Magnet (in session "TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi")

Quench detection and protection of high-temperature superconducting magnets: The case of a Bi-2212 Rutherford cable canted-cosine-theta dipole magnet (in session "THU-PO3-707 Quench Analysis I")

Quench Detection and Voltage Spikes Analysis of the FECR Half-scale Nb3Sn Superconducting Magnet (in session "WED-PO2-706 Quench Detection II")

Quench Dynamics testing and 3D modeling of VIPER HTS Cable (in session "TUE-PO1-708 Quench Analysis II")

Quench Protection and Cyclic Fatigue Test Results for MTI Coils in the 40T All-superconducting Magnet Project at the NHMFL (in session "WED-OR2-302 HTS coil I")

Quench protection of a large aperture 15 T Cable Test Facility Nb3Sn Magnet (in session "TUE-PO1-705 Quench Detection I")

Quench Protection of the HL-LHC Hollow Electron Lens Superconducting Solenoid Magnets (in session "TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi")

Quench protection study of a large scale REBCO magnet with additional copper tapes (in session "THU-OR4-704 Stability and Quench")

Quench Protection Test Results of an HTS Model Magnet for MRI Systems Equipped with Electrically Conductive Epoxy Resin (in session "WED-PO2-709 No-Insulation Coils")

Quench Study on REBCO Coil for a HTS Sextupole Magnet (in session "THU-PO3-707 Quench Analysis I")

Quenching HTS Pancake Coils using Frequency Loss Induced Quench Protection System. (in session "TUE-PO1-705 Quench Detection I")

R&D of a No-insulation HTS Magnet for Small-Scale Bilateral HTS Linear Synchronous Motors (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Radiation-Induced Demagnetization Measurement of Permanent Magnet Materials by Systematic Neutron Irradiation (in session "TUE-PO1-115 Permanent accelerator magnets")

Rail magnets arrangement for improving stability of a superconducting transport system (in session "THU-PO3-511 Maglev and Levitation III")

Reactor Vibration Reduction Using Global Topology Optimization Algorithms (in session "TUE-PO1-720 Design & Diagnostics")

Real-time Field Mapping of Screening Current induced Fields in an HTS Pancake Coil using a Hall Sensor Array (in session "WED-OR2-703 Mechanical Behavior and Coil Tests")

Recent Development Trends of a 1.2 MW Superconducting Induction Heater using MgB2 NI Magnets (in session "WED-PO2-505 Special Purpose magnets II: Induction Heating, Magnetic Refrigeration & other applications")

Recent developments at the pulsed magnetic field facility of the LNCMI (in session "TUE-OR1-304 Resistive and Pulsed High-Field Magnets")

Recent progress of RE-based High Temperature Superconductors at Fujikura (in session "TUE-OR1-602 High Tc Wires and Cables I")

Record High Ramping Rates in HTS Based Superconducting Accelerator Magnet (in session "TUE-PO1-LN1 Late News I")

Redesign and rebuild of the Coils for the 60 T Controlled Waveform Magnet at the NHMFL (in session "TUE-OR1-304 Resistive and Pulsed High-Field Magnets")

Reduction of AC losses in REBCO split wire and coil without deterioration of critical current (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Reinforcement Structure of HTS Magnet to Increase the Magnetic Moment for Space Application (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Relaxation of residual stress in the aluminum alloy ring by electromagnetic bulging method (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Reliability Analysis of Pulsed High Magnetic Field Facility at WHMFC (in session "THU-PO3-LN2 Late News II")

Removal of Iron Oxide Scale from Boiler Feed-water in Thermal Power Plant by Magnetic Separation　-Aggregation States of Oxygenated Treatment Scale- (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Removal of magnetic fine particles from non-magnetic fine powder by high gradient magnetic separation under dry condition (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Repetitive irradiation tests at cryogenic temperature by neutrons and protons on stabilizer materials of superconductor (in session "THU-PO3-617 Other Components for Magnets")

Report on the Improvement of In-field Critical Current in SuNAM’s Coated Conductor (in session "TUE-OR1-602 High Tc Wires and Cables I")

Research on combined use of magnetic refrigeration technology for refrigerant circulation type high temperature superconducting coil cooling system (in session "THU-PO3-802 Cryostats and Cooling systems")

Research on fatigue characteristics of optical fiber applied in HTS cable (in session "TUE-PO1-606 High Tc Wires and Cables III")

Research on HTS flywheel energy storage system in China (in session "THU-OR5-501 Superconducting Rotating Machine, Levitation and Flywheel")

Research on Nondestructive Examination of Jacket Sections for CFETR TF Coil (in session "TUE-PO1-615 Structural Materials for Magnets")

Research on universal mathematical model and design method of homopolar hybrid magnetic bearing (in session "THU-PO3-511 Maglev and Levitation III")

Resistances between soldered YBCO tapes consisting of the stacked cable (in session "TUE-PO1-606 High Tc Wires and Cables III")

Review of experimental results and parameters for evaluation of AC losses of the ITER conductors (in session "TUE-PO1-203 Fusion III: ITER")

Robust and low-loss high temperature superconducting armature winding technology to realize a practical fully superconducting rotating machine: from the viewpoint of self-organizing design method and FFDS conductor technique (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Role of asymmetric critical current on magnetization loss characteristics of REBCO coated conductors at various temperatures (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Root Cause of the Strain Irreversibility Cliff in RRP® Nb3Sn Wires (in session "THU-OR5-601 A15-type Superconducting Wires and Cables")

Rotating gantry for heavy ion therapy mounted with superconducting bending and focusing magnets (in session "TUE-PO1-402 Magnets for Medical App I")

Running State Detection of HTS Pining Maglev System Based on Deep Learning Algorithms (in session "TUE-PO1-509 Maglev and Levitation I")

Screening Current Induced Field changes during De-energization with Axial Clamping (in session "THU-PO3-719 Design and Analysis II")

Screening current simulation of REBCO pancake coils considering coil deformation (in session "WED-PO2-718 Design and Analysis I")

Seismic analysis of magnet systems in helical fusion reactors designed with topology optimization (in session "THU-PO3-205 Fusion V: Toward DEMO")

Self-protecting behavior of an intra-Layer No-Insulation (LNI) REBCO coil under an LTS outer coil’s quench (in session "WED-OR2-302 HTS coil I")

Self-protecting behavior of Metal-as-Insulation windings made of High Temperature Superconductor tapes (in session "TUE-PO1-720 Design & Diagnostics")

Semiellipse Coil Pair with Eccentric Windings for Improved Intracranial Induced Electrical Field in Transcranial Magnetic Stimulation (in session "WED-PO2-403 Magnets for Medical App II")

Separation of Microplastics from Sea Water by Means of Electromagnetic Force (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Shell-based support structure for the 45 GHz ECR Ion Source MARS-D (in session "THU-PO3-108 Accelerator Magnets VI: LTS")

Short-time fabrication and trapped field distributions of large REBCO melt-textured bulks made by Single-Direction Melt Growth method (in session "THU-PO3-612 Bulk Magnets")

Silver nanowires - copper composite wires for non-destructive pulsed fields : importance of avoiding the formation of a silver/copper alloy relative to the electrical resistivity and the tensile strength (in session "TUE-PO1-615 Structural Materials for Magnets")

Simulation and experimental validation of superconducting magnetic levitation suspension system (in session "TUE-PO1-509 Maglev and Levitation I")

Simulation and Experiments on an AC-Injection Active Protection Scheme for a Conduction Cooled, React-and-Wind, MgB2 MRI Coil Segment (in session "TUE-PO1-705 Quench Detection I")

Simulation of Quench Transients in Self-Protecting Magnets with a 3D Semi-Implicit Finite-Difference Method (in session "FRI-OR6-701 Design and Analysis")

Simulation of the Magnetic Particle Trajectory in a Vein for MDDS Application (in session "WED-PO2-403 Magnets for Medical App II")

Simultaneous manufacturing of multiple junctions between Bi2223 tapes with rapid melt joining (in session "WED-PO2-613 Joints between Superconductors")

SIS100 superconducting magnet series production (in session "TUE-OR1-102 Magnets for accelerator science and particle physics")

Software Architecture and Hardware Organization in Mu2e Solenoid Field Mapping System (in session "WED-PO2-114 Particle Detector Magnets")

Stability and current sharing in YBCO cables – impact of broken elements - FEM modeling (in session "TUE-PO1-606 High Tc Wires and Cables III")

Stability of a metal insulated 2G HTS coil under the external ac field (in session "THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III")

Start of the ITER Central Solenoid Assembly (in session "THU-OR4-202 Fusion Magnets II")

State predictive control of modular SMES magnet based on deep reinforcement learning (in session "THU-PO3-LN2 Late News II")

Status and Progress on First-of-a-Kind Feeder Busbar Joint Assembly at ITER Magnet System (in session "WED-PO2-613 Joints between Superconductors")

Status of mu2e Transport Solenoid cold mass (in session "TUE-OR1-102 Magnets for accelerator science and particle physics")

Status of the production of the European ITER Toroidal Field Coil Insertion. (in session "TUE-PO1-203 Fusion III: ITER")

Status Report of Sirius Delta Undulator (in session "WED-PO2-105 Accelerator Magnets III: undulators and related magnets")

STEAM Software Framework to Simulate Transients in Accelerator Magnets and Circuits (in session "THU-PO3-719 Design and Analysis II")

Strain measurements of a combined superconducting magnet on sextupole coils and solenoids during its assembly and excitation (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

Structural Design and Analysis of Cryogenic System for 3.5 T HTS Magnetic Separation Facility (in session "THU-PO3-802 Cryostats and Cooling systems")

Structural Modeling of HTS VIPER Cable for High-Field Magnet Applications (in session "THU-PO3-611 Cable-in-Conduit and Other Internally Cooled Conductors")

Structure design on the 3-T HTS coil for desktop MRI magnet using the Distributed Genetic Algorithm method. (in session "THU-PO3-404 Magnets for MRI")

Structure Optimization of Linear Generator Coil in No-contact On-board Power Source for EDS Maglev (in session "THU-PO3-803 Current supply, regulation & cryogenic power electronics")

Study of REBCO Trapezoidal Armature Windings for Superconducting Induction Motor (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Study of refrigerant circulation system and cryofan for cooling high temperature superconducting coils. (in session "THU-PO3-802 Cryostats and Cooling systems")

Study of Rotational Stability in the HTS Magnetic Bearing Rotor Incorporated the Secondary of the Induction Motor (in session "THU-PO3-511 Maglev and Levitation III")

Study of the Basic Properties of Meter-class REBCO High-Temperature Superconducting Coils for MRI (in session "THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications")

Study on AC Over-Current Characteristics with the Physical Properties of the Outer Layer of REBCO Superconducting Wire Having Composite Structure Using RF Sputtering Deposition Method (in session "TUE-PO1-609 Stability and Mechanical Properties")

Study on Conduction Cooling of Superconducting Magnets for the ILC Main Linac (in session "THU-PO3-108 Accelerator Magnets VI: LTS")

Study on Forced Flow Cooling of Superconducting Magnet for Compact Synchrotron (in session "THU-PO3-802 Cryostats and Cooling systems")

Study on Low Loss Coil Structure for High Energy Density of a Wireless Power Transmission System Using High Temperature Superconducting Coils for Railway Vehicle (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Study on Screening Current of Like Quasi-isotropic Conductor Based on optimized T-A formulation (in session "THU-PO3-608 AC Loss in HTS Wires and Cables")

Study on the Optimum Microstructure of High Jc Nb3Sn Wire after medium heat treatment (in session "WED-PO2-604 Low Tc Wires and Cables")

Study on the state prediction of the superconducting magnet system for a nuclear fusion experimental device by machine learning (in session "THU-PO3-802 Cryostats and Cooling systems")

Study on the structure design for high performance non-contact rotating machine using HTS bulks (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Study on the structure design of HTS bulk magnets for compact MRI (in session "THU-PO3-612 Bulk Magnets")

Study on the Through Duwar Wall Excitation of YBCO Coil Based on Linear-motor Type Flux Pump (in session "TUE-PO1-804 Flux pumps")

Study on thermal stability of transformer under external thermal disturbance (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Successful demonstration of the first CORC® cable insert solenoid in 14 T background magnetic field operating at currents exceeding 4 kA, current densities of over 250 A/mm2, and 275 MPa source (JBR) stress (in session "WED-OR2-302 HTS coil I")

Sudden discharge measurement system and results for 100 mH class no-insulation coils (in session "WED-PO2-723 Moel Coil II & Test Facilities")

Superconducting coil stress specifications for the series production of the Nb3Sn MQXFA quadrupole magnets for the HL-LHC (in session "THU-PO3-112 HL-LHC Accelerator Magnets II: Nb3Sn")

Superconducting Curved Canted-Cosine-Theta (CCT) Nested and Combined Error Free Dipole Quadrupole Fields Coil Geometry for the HIE-ISOLDE Recoil Separator Ring Project. (in session "WED-PO2-107 Accelerator Magnets V: LTS")

Superconducting Joint for “Reacted” MgB2 multifilament Wires for the Development of MRI Magnets (in session "WED-PO2-613 Joints between Superconductors")

Superconducting Magnet Design for a Vertical-ring High Gradient Magnetic Separation System (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Superconducting Magnet Energy Extraction with Varistors to Reduce Quench Voltages and Hot-Spots (in session "TUE-PO1-705 Quench Detection I")

Superconducting magnet system for HIAF (in session "FRI-OR6-101 Accelerator Magnets I: HFM and others applications")

Superconducting magnets for antimatter traps or neutron traps – designed and manufactured in industry (in session "WED-PO2-114 Particle Detector Magnets")

Superconducting properties of Ce and La co-doped RE123 thin films fabricated by fluorine-free MOD method (in session "WED-PO2-607 Coated Conductor Processing and Flux Pinning")

Superconducting properties of production 2G HTS wires based on YBCO with Y2O3 nanoparticles in magnetic field up to 16 T (in session "WED-PO2-607 Coated Conductor Processing and Flux Pinning")

Surface Dielectric Characteristics of GFRP and PTFE in Cryogenic Environment under the Switching Impulse Superimposed on DC Voltage (in session "WED-PO2-616 Electrical Insulation for Magnets")

Suspension characteristics Analysis on Three-degree-of-freedom Bearingless Switched Reluctance Motor (in session "WED-PO2-718 Design and Analysis I")

Suspension Force Analysis on 4-pole Radial Hybrid Magnetic Bearing with Independent Magnetic Circuits (in session "THU-PO3-511 Maglev and Levitation III")

Synthesis and Current Transport Properties of Ba(Fe,Co)2As2 Polycrystalline Bulks Prepared by Spark Plasma Sintering (in session "THU-PO3-605 MgB2 and Iron-based Wires and Cables")

T-A Formulation for Modelling and AC Loss Reduction Studies in a Superconducting Synchronous Generator for a 10 MW Wind Turbine (in session "THU-OR5-501 Superconducting Rotating Machine, Levitation and Flywheel")

Temperature Considered Active Feedback Control of No-Insulation HTS Magnet (in session "TUE-PO1-722 Model Coil I")

Temperature Dependence of Optimal Shape and DC Current Transport Characteristics of 3T Whole Body REBCO MRI Magnet (in session "THU-PO3-404 Magnets for MRI")

Tensile properties of (Gd,Y,Er)BaCuO superconducting bulk materials fabricated by infiltration growth technique (in session "THU-PO3-612 Bulk Magnets")

Test and Analysis of Stacked-Tape-Wound Laboratory-Scale NI HTS TF Module Coil (in session "WED-OR3-201 Fusion Magnets I")

Test result of a full-scale prototype of beam separation dipole magnet for the High-Luminosity LHC upgrade (in session "WED-OR2-103 HL-LHC Accelerator Magnets I")

Test Results of Alternative Magnet Technologies for HTS Magnet Quench Detection and Protection (in session "TUE-PO1-705 Quench Detection I")

Test Results of the MQYYM: a 90 mm NbTi quadrupole magnet option for HL-LHC (in session "TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi")

The Calculation of Electromagnetic Force In Crystallizer About Using The High-temperature Superconducting Electromagnetic Stirring Device (in session "WED-PO2-505 Special Purpose magnets II: Induction Heating, Magnetic Refrigeration & other applications")

The Calculation of The Heating Efficiency About Using The High-temperature Superconducting Induction Heating Device To Heat The Medium and Low-carbon Steel and Alloy Steel (in session "WED-PO2-505 Special Purpose magnets II: Induction Heating, Magnetic Refrigeration & other applications")

The Coil Optimization Design of H-SFCL Applied in Ship DC System (in session "THU-PO3-512 SFCL")

The critical properties and AC loss characteristics of the developed ultra-fine and flexible Nb3Al superconducting wires (in session "TUE-PO1-711 Losses in conductors and coils")

The Effects of Conductor Magnetization on the Magnetic Field in an Accelerator Magnet System with Various Conductors (in session "TUE-PO1-714 Magnetization and Field Quality Ⅱ")

The effects of nanostructure on Jc(B, T) in ReBCO coated conductors at multiple angles (in session "TUE-OR1-602 High Tc Wires and Cables I")

The electrical behavior of stacked coated conductors concerning the interlayer resistance (in session "TUE-PO1-609 Stability and Mechanical Properties")

The Fabrication Technology and Test Results of the NbTi Superconducting Racetrack Magnet (in session "WED-PO2-105 Accelerator Magnets III: undulators and related magnets")

The HL-LHC Superferric High Order Corrector Magnets: Series Production and Powering Tests Status (in session "WED-OR2-103 HL-LHC Accelerator Magnets I")

The influence of friction between layers of coil on the magneto-mechanical behaviors of YBCO superconducting magnet (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

The influence of local heat generation in a REBaCuO ring bulk with large bore on mechanical fracture during pulsed-field magnetization (in session "THU-PO3-612 Bulk Magnets")

The influence of metal plates on quench protection of high temperature superconducting pancake coils (in session "TUE-PO1-705 Quench Detection I")

The influence of SMES magnet operation parameters on voltage distribution characteristic (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

The Magnetic Center Alignment Based on FECR Superconducting Ion-source After Cryostat Installation (in session "TUE-PO1-714 Magnetization and Field Quality Ⅱ")

THE MAGNETIC FIELD MEASUREMENT SYSTEMS FOR Pr2Fe14B Based CRYOGENIC UNDULATOR AT HEPS (in session "WED-PO2-105 Accelerator Magnets III: undulators and related magnets")

The Nb3Sn superconductor procured for the High Luminosity Upgrade of the Large Hadron Collider (in session "WED-PO2-604 Low Tc Wires and Cables")

The Pole Profile Optimization of High-gradient Quadrupole for the HALF Storage Ring (in session "WED-PO2-116 Resistive acclerator magnets I")

The Potential for the Use of Low AC Losses Hyperconducting Aluminum in Cryogenic Motors (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

The pre-compression study for CFETR central solenoid model coil (in session "TUE-PO1-715 Mechanical Behavior of Coil I")

The pressure drop measurement of JT-60SA superconducting magnets (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

The research on double pancake coil of 1MJ high temperature superconducting magnet energy storage for the power system of NICA complex (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

The research on the thermal deformation of Cu-Nb composites (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

The result of ITER TF coil double-pancake heat treatment in Japan (in session "TUE-PO1-203 Fusion III: ITER")

The separation-recombination dipole MBRD for the High-Luminosity LHC: from prototype to series (in session "TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi")

The study of overcurrent excitation for NI HTS coils (in session "WED-PO2-709 No-Insulation Coils")

The Study on Excitation Loss of NI Coil for TF Magnets (in session "WED-PO2-204 Fusion IV: HTS conductors and coils")

The Study on Quench properties of 2G HTS coils using the tapes by Holing and Hole filling process (in session "TUE-PO1-609 Stability and Mechanical Properties")

The study on the quench helium release process of HFRS superconducting magnet (in session "THU-PO3-802 Cryostats and Cooling systems")

The Superconducting Shield (SuShi) septum magnet prototype (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

The Test Results of a YBCO Racetrack Coil at 30K Incorporate a Novel Cryostat Suitable for a Linear-Motor Type Flux Pump Used on an Synchronous Motor (in session "WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II")

Thermal analysis of powering and protection transients in a superconducting magnet for medical applications (in session "TUE-PO1-402 Magnets for Medical App I")

Thermal Analysis of Toroidal Field Coil of EAST During Plasma Discharges (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

Thermal and electrical characteristics of NI HTS coil fabricated by diffusion bonding technique (in session "TUE-PO1-722 Model Coil I")

Thermal characteristics of JT-60SA thermal shield (in session "FRI-OR7-801 Cryogenics")

Thermal design and test results of the superconducting magnet for a compact heavy-ion synchrotron (in session "TUE-PO1-402 Magnets for Medical App I")

Thermal Hydraulic Analysis of Toroidal Field Coil of CFETR (in session "THU-PO3-205 Fusion V: Toward DEMO")

Thermal Network Modeling for High-frequency Insulated Core Transformers (in session "THU-PO3-719 Design and Analysis II")

Thermal resistance between metallic surfaces of copper and stainless steel at different temperatures and contact pressures for high current HTS Cable-in-Conduit Conductors (in session "TUE-PO1-615 Structural Materials for Magnets")

Thermal stability against local critical current degradation in an HTS pancake coil wound with an insulated conductor composed of no-insulated multiple tapes (in session "THU-PO3-719 Design and Analysis II")

Thermal Stability Analysis of No-insulation Magnet under Dynamic Operational Conditions (in session "WED-PO2-709 No-Insulation Coils")

Thermal-electrical coupling quench study of HTS cyclotron for medical application (in session "WED-PO2-403 Magnets for Medical App II")

Thermal-Electromagnetic Coupled Analysis Considering AC Losses in REBCO Windings at 65 K of 10 MW Fully-Superconducting Synchronous Generators for Electric Aircraft (in session "TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I")

Thermal-hydraulic and quench analysis of EUROfusion DEMO PF coils (in session "THU-PO3-205 Fusion V: Toward DEMO")

Thermal-Quench Behavior of GdBCO Coils Wound with Grease Containing Various Fillers as Insulation Materials (in session "THU-PO3-710 Stability")

Thermal-structural analyses on magnetic structure of the CPMU prototype in SSRF (in session "WED-PO2-105 Accelerator Magnets III: undulators and related magnets")

Thermodynamic Behavior Analysis and Heat Transfer Structure Design of Helium Bubble Aggregation in High Field Superconducting Magnets (in session "THU-PO3-802 Cryostats and Cooling systems")

Toward energy-efficient multi-step electromagnetic forming process by using a curved-geometry field shaper: Principle, Prototype Design, and Experiments (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Toward flexible coil design for electromagnetic forming of both sheet and tubular metal by combining of coil and field shaper: Principle, Optimization, and Experimental validation (in session "WED-PO2-306 Resistive and Pulsed High-Field Magnets")

Towards 20 T hybrid accelerator dipole magnets (in session "FRI-OR6-101 Accelerator Magnets I: HFM and others applications")

Transient behavior of a REBCO No-Insulation or Metal-as-Insulation multi-pancakes-or racetracks- coil using a Partial Element Equivalent Circuit model. (in session "THU-PO3-707 Quench Analysis I")

Transient Electro-Magnetic and Thermal Simulation of HTS Non-Insulated Coils (in session "THU-OR4-704 Stability and Quench")

Transient Simulation and Field Measurement of Trim Quadrupoles and AC Sextupoles for CSNS/RCS Upgrade (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Trap Energy Distribution of PPLP according to PP ratio at cryogenic temperature (in session "WED-PO2-616 Electrical Insulation for Magnets")

Trapped Field Characteristics of K-doped Ba122 Polycrystalline Bulks Synthesized by Spark Plasma Sintering (in session "FRI-OR7-502 SMES, Superconducting Transformers, Cables and Bulks")

Trapped field properties of MgB2 bulks prepared via an in-situ infiltration-reaction process using refined boron powders (in session "TUE-PO1-LN1 Late News I")

Truncated-Cosine-Theta Design for High Field Septum Magnets (in session "TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction")

Ultra-low resistance joints between Bi2223 and NbTi wires using superconducting Bi-Pb solder (in session "WED-PO2-613 Joints between Superconductors")

Ultrasonic Waveguides for Quench Detection in HTS Magnets (in session "THU-OR4-704 Stability and Quench")

Unique and Novel High Tin Bronze and Nb3Sn Multifilamentary Wires (in session "WED-PO2-604 Low Tc Wires and Cables")

Updated structural assessment of the Poloidal Field Coils of the DTT tokamak (in session "THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices")

UPDATES ON CEA DESIGN AND EXPERIMENTAL ACTIVITIES ON EU DEMO TF (in session "THU-PO3-205 Fusion V: Toward DEMO")

US-HiLumi Accelerator Upgrade Project Pre-series Cryo-Assembly 01 Production and First Results (in session "THU-PO3-112 HL-LHC Accelerator Magnets II: Nb3Sn")

Use of Critical Current Distribution Measurements in Bi-2212 Round Wires as a tool to significantly enhance and stabilize the $J_{\text{c}}$ properties (in session "WED-PO2-610 High Tc Wires and Cables IV")

Validation of a high-gradient trapped field magnet with an open bore providing a quasi-microgravity space on Earth and its application to magnetic levitation (in session "TUE-PO1-504 Special purpose magnets I: Field gradients & other applications")

Variable inductance observed in the HTS non-insulation (NI) coils (in session "FRI-OR6-701 Design and Analysis")

Various methodologies used in the mechanical analysis of TF coils for EU DEMO (in session "WED-PO2-716 Mechanical Behavior of Coil II")

Varistor Insulation for HTS Magnets (in session "WED-PO2-616 Electrical Insulation for Magnets")

Verifying the method to estimate local critical currents in the HTS coil by means of Pick up coils (in session "WED-PO2-721 Novel Diagnostics")

Vertical Dynamic Response of Vehicle-bridge Coupled Systems in Superconducting Electrodynamic Suspension Train (in session "WED-PO2-510 Maglev and Levitation II")

Vibration Characteristics of HTS Maglev System Levitated Above a Halbach Permanent Magnet Track (in session "THU-PO3-511 Maglev and Levitation III")

Wind photovoltaic Synchronous Generating System integrating with a SMES for a Grid Forming Renewable Energy System (in session "TUE-PO1-513 SMES, Transformers, Wireless Power Transfer")

Choose timezone

MT27, 27th International Conference on Magnet Technology