LBNL
Author in the following contributions
- Mon-Mo-Po1.04-15 [47]: Mechanical analysis and measurements of MQXFS6, the fifth short model of the Nb3Sn Low-β Quadrupole for the Hi-Lumi LHC
- Thu-Mo-Or16-06: Prediction of the Reversible Critical Current Degradation in Nb3Sn Superconducting Accelerator Magnets
- Thu-Af-Or20-01 [Invited]: Quench detection via Rayleigh backscattering interrogated optical fibers
- Wed-Af-Po3.20-02 [55]: No Insulation CCT Coils for Superconducting Accelerator Magnets
- Thu-Mo-Po4.07-05 [50]: Field Quality Measurements of High-Temperature Superconducting Canted Cosine Theta Accelerator Magnets
- Mon-Af-Po1.15-02 [35]: An electric-circuit model on the inter-tape contact resistance and current sharing for REBCO cable and magnet applications
- Thu-Mo-Po4.07-03 [48]: Magnetic Measurements of MQXFA Prototype Quadrupoles during Magnet Assembly
- Thu-Mo-Po4.02-03 [9]: Preliminary Design of HEPdipo, a Nb3Sn Large Aperture Dipole Magnet for Cable and Insert Coil testing
- Mon-Mo-Po1.02-07 [19]: User Defined ANSYS Elements for 3D Multiphysics Modeling of Superconducting Magnets
- Mon-Mo-Po1.03-02 [23]: Fracture Failure Analysis for MQXFA Magnet Aluminum Shell
- Thu-Mo-Or16-01 [Invited]: Status and Plans of the MQXFA Low Beta Quadrupoles for HL-LHC
- Fri-Mo-Or25-07: Analysis of the transient mechanics behind superconducting accelerator magnet training
- Wed-Af-Or13-03: Performance, diagnostic, and quench measurements of a dipole composed of two racetrack coils wound with high temperature superconducting Bi-2212 Rutherford cable
- Thu-Af-Or24-01: Diagnostics and control of superconducting magnets using diffuse field ultrasound
- Fri-Mo-Or25-06: Epoxy and quench training of Nb3Sn accelerator magnets
- Thu-Mo-Or16-04: Mechanical performance of the first two prototype 4.5 m long Nb3Sn low-β quadrupole magnets for the Hi-Lumi LHC Upgrade
- Tue-Mo-Or8-02: Recent progress on CORC® cable and wire development for magnet applications
- Thu-Af-Or23-06: Design and Test of a Curved Superconducting Dipole Magnet for Proton Therapy
- Wed-Af-Or13-04: Development of REBCO dipole magnets using CORC® wires
- Thu-Af-Or24-06: Design and initial test results for a canted-cosine-theta dipole subscale magnet series
- Fri-Mo-Or25-04: Fabrication and test of Bi-2212 Canted-Cosine-Theta coils
- Mon-Mo-Or2-02: High-field magnets wound from CORC® cables and wires
- Tue-Mo-Or7-01: Assembly and First Test of a 15 T Nb3Sn Dipole Demonstrator