MT26 Abstracts, Timetable and Presentations

Name: MT26 Abstracts, Timetable and Presentations
Start: 2019-09-22T14:00:00-07:00
End: 2019-09-27T13:00:00-07:00
Location: Hyatt Regency Hotel Vancouver

22–27 Sept 2019

Hyatt Regency Hotel Vancouver

Canada/Pacific timezone

Conference Management

Speaker List

Walid ABDEL MAKSOUD (CEA)
- Speaker at Mon-Af-Or5-04: Madmax: design of a very large-scale 9 T dipole for dark matter experiment
Dmitry Abin (NRNU MEPhI)
- Speaker at Mon-Mo-Po1.09-05 [101]: Levitation characteristics of a magnetic bearing with a superconducting stator from CC tapes
Patricia Aguar Bartolome (GSI Helmholtzzentrum für schwerionenforschung GmbH)
- Speaker at Thu-Af-Or22-06: Status of the SIS100 dipole magnet production and testing
- Speaker at Tue-Af-Po2.17-09 [32]: Preparation of the superconducting magnet string test for the SIS100 synchrotron
Hee-Jae Ahn (NFRI)
- Speaker at Wed-Af-Po3.17-09 [37]: Analysis of the mechanical behavior of the KSTAR CS magnet during long pulse plasma discharges
Mark Ainslie (University of Cambridge)
- Speaker at Tue-Af-Po2.23-02 [89]: A Hybrid Trapped Field Magnet Lens (HTFML): concept and realisation
Giorgio Ambrosio (Fermilab)
- Speaker at Thu-Mo-Or16-01 [Invited]: Status and Plans of the MQXFA Low Beta Quadrupoles for HL-LHC
Naoyuki Amemiya (Kyoto University)
- Speaker at Key Issues in HTS Magnet and Conductor Technology Toward Various Applications
- Speaker at Wed-Af-Or13-01 [Invited]: Ac loss and shielding-current-induced field in a coated-conductor test magnet for accelerator applications under repeated excitations
- Speaker at Wed-Mo-Or11-02 [Invited]: Magnetic field measurements of stack of double-pancake coils wound with striated and copper-plated coated conductors
Kathleen Amm (Brookhaven National Laboratory)
- Speaker at Mon-Mo-Po1.03-10 [30]: Design of a Compact Support Structure for a High Gradient Niobium Tin Superconducting Magnet for a Proposed Electron Ion Collider (EIC).
Soobin An (SeoulNationalUniversity)
- Speaker at Mon-Mo-Po1.01-10 [9]: A Conceptual Design of “Magnetic Dam” as a Quench Protection System Using Electromagnetically Coupled Coils for NI HTS Magnet
- Speaker at Wed-Mo-Po3.13-12 [120]: A Feasibility Study to Apply the Bitter Magnet to Electric Power Devices
Alessandro Anemona (ICAS)
- Speaker at Mon-Mo-Or1-02: Design of the inter-coil structures and supports of the DTT magnet system
Aurora Cecilia Araujo Martinez (Universidad de Guanajuato)
- Speaker at Mon-Af-Po1.15-02 [35]: An electric-circuit model on the inter-tape contact resistance and current sharing for REBCO cable and magnet applications
Diego Arbelaez (Lawrence Berkeley National Lab)
- Speaker at Thu-Af-Or24-06: Design and initial test results for a canted-cosine-theta dipole subscale magnet series
Ignacio Aviles Santillana (CERN, University Carlos III (ES))
- Speaker at Thu-Mo-Po4.04-04 [27]: Design Optimization and Assessment of Fabrication of ITER Central Solenoid Twin Box Joints
Julien Avronsart (CEA)
- Speaker at Tue-Mo-Po2.07-02 [42]: Design, manufacturing and testing of a high-field 2 + 3 T MgB2 dry magnet demonstrator
Satoshi Awaji (Tohoku University)
- Speaker at Status of High-field ReBCO Conductor
- Speaker at Thu-Mo-Or17-01 [Invited]: High field cryogen-free superconducting magnet development beyond 30 T with advanced REBCO and high strength Nb3Sn conductors
Jerome Axensalva (CERN)
- Speaker at Mon-Mo-Po1.03-08 [28]: Vacuum impregnation of long Nb3Sn coils for the HL-LHC project
Arnaud Badel (1) HFLSM, Institute for Materials Research, Tohoku University)
- Speaker at Fri-Mo-Or27-06: Field and Voltage transient behavior in REBCO HTS coils up to the limiting critical current: Comparison between Experiment and Modelling
Karie Badgley (Fermilab)
- Speaker at Mon-Af-Or5-02: Status of Performance Testing of the Mu2e Transport Solenoid Coils
Geonwoo Baek (Yonsei University)
- Speaker at Wed-Af-Po3.15-09 [13]: Effect of Screening Current Induced Field on Field Quality of an Air-Core HTS Quadruple Magnet
Lifeng Bai (Northwest Institute for Nonferrous Metal Research)
- Speaker at Mon-Af-Po1.11-09 [9]: Development of Bi-2212 high temperature superconducting magnet
Hongyu Bai (National High Magnetic Field Laboratory)
- Speaker at Thu-Mo-Or17-02: The 40 T Superconducting Magnet Project at the National High Magnetic Field Laboratory
ye bai (GE Global Research Center)
- Speaker at Tue-Mo-Po2.04-08 [22]: Design of focusing solenoids for charged particle beam applications
Thanatheepan Balachandran (University of Illinois at Urbana Chamapign)
- Speaker at Thu-Mo-Or18-04: Evaluation and Mitigation of AC Losses in a Fully Superconducting Machine for Wind Turbine Applications
Maria Baldini (Fermi national accellerator laboratory)
- Speaker at Mon-Mo-Po1.03-09 [29]: Characterization of NbTi busbar for HL LHC Interaction Region Quadrupoles
Jeseok Bang (Seoul National University)
- Speaker at Thu-Af-Or24-04: "Thermal Eraser” to Mitigate Screening Current by Optimal Control on Temperature in an HTS Pancake Coil
- Speaker at Thu-Mo-Po4.03-05 [16]: A Numerical Method to Calculate Spatial Harmonic Coefficients of Magnetic Fields generated by Screening Currents in an HTS Magnet
Tae-Kyoung Bang (Republic of Korea /Chungnam National University)
- Speaker at Tue-Mo-Po2.11-08 [94]: Experiments and Comparative Study of Rotor Vibration of Permanent Magnet Machines with Two Different Fractional pole/slot combinations
- Speaker at Wed-Mo-Po3.05-03 [30]: Design and Analysis of High-Speed Permanent Magnet Synchronous Generator Considering Rotor Structure
Nobuya Banno (National Institute for Materials Science)
- Speaker at Wed-Af-Po3.21-06 [72]: Fundamental study on the effect of Zn addition into Cu matrix in internal tin Nb3Sn conductors
emanuela barzi (Fermilab)
- Speaker at Wed-Af-Or14-04: Wire and Cable Characterization of Nb3Sn Conductor with High Heat Capacity
- Speaker at Wed-Af-Po3.21-12 [78]: Heat Treatment Studies of Nb3Sn RRP wires for Superconducting Planar Undulators
Markus Bauer (THEVA Dünnschichttechnik GmbH)
- Speaker at Thu-Af-Or19-03: Development of ReBCO coated conductors with improved properties for magnet applications by THEVA
- Speaker at Thu-Mo-Or18-01 [Invited]: Development, test, installation, and commissioning of the 3 MW superconducing EcoSwing wind power generator
Wu Beimin (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.04-12 [44]: Mechanical behavior of a dipolar support structure for sextupole-in-solenoid Magnet during assembly, cool-down and warm-up processes
boris bellesia (fusion for energy)
- Speaker at Fri-Mo-Or26-02: Progress on European ITER Toroidal Field Coil procurement: Cold Test and Insertion Work Package
Christophe Paul Berriaud (DAPNIA)
- Speaker at Wed-Mo-Po3.10-02 [76]: Conductor Design of the Madmax 9 T Large Dipole Magnet
Edgar Berrospe (Universidad Nacional Autonoma de Mexico)
- Speaker at Fri-Mo-Or27-07: Screening current and hysteresis losses in the REBCO inserts of the 32 T magnet using a T-A homogenous model
Kabindra Bhattarai (National High Magnetic Field Laboratory)
- Speaker at Mon-Mo-Po1.02-02 [14]: Progress in Simulation Method of No-Insulation High Temperature Superconductor Magnets
Mark Bird (FSU)
- Speaker at Fri-Mo-PL7-01: Recent Advances in Ultra-High Field Magnet Technology
Cristian Boffo (Babcock Noell GmbH)
- Speaker at Tue-Mo-Po2.03-05 [12]: Performance of the new ALPHA-G conduction cooled solenoid
Scott Bole (National High Magnetic Field Laboratory, Tallahassee, USA)
- Speaker at Tue-Af-Po2.15-01 [12]: Conceptual Design for a next generation Resistive Large Bore Magnet at the NHMFL
Uijong Bong (Seoul National University)
- Speaker at Wed-Af-Po3.24-10 [104]: An Experimental Study on “Defect-irrelevant” Behavior of No-insulation REBCO Pancake Coil in Conduction-Cooling Operation
alessandro bonito oliva (F4E)
- Speaker at Wed-Mo-PL3-01: Toward Completion and Delivery of the First EU ITER Magnets
Bernardo Bordini (CERN)
- Speaker at High-field Accelerator Magnets
- Speaker at Wed-Af-Or14-06: The effect of transverse loads on Nb3Sn Rutherford cables for accelerator magnets
Lorenzo Bortot (CERN)
- Speaker at Wed-Mo-Or11-03: Experimental results of field-error cancellation with HTS-based magnetic screens
Daniela Boso (University of Padova)
- Speaker at Mon-Af-Po1.15-07 [39]: Numerical investigation on the thermo-electro-mechanical behavior of HTS tapes
Ernesto Bosque (National High Magnetic Field Laboratory)
- Speaker at Wed-Mo-PL4-03: Bi-2212 High Field Magnet Development
- Speaker at Tue-Mo-Or8-08: Critical Current – Strain Dependence, Ic(ε), of Solenoids Wound with Bi-2212 Round Wire
Ernesto Bosque (Applied Superconductivity Center, National High Magnetic Field Laboratory, Florida State University)
- Speaker at Wed-Mo-PL4-03: Bi-2212 High Field Magnet Development
EVA BOTER (FUSION FOR ENERGY)
- Speaker at Mon-Af-Po1.17-05 [56]: F4E Procurement of the Pre-Compression Rings made of pultruded composite material
Konstantinos Bouloukakis (Victoria University of Wellington)
- Speaker at Tue-Mo-Or9-03: Development of quench tolerant epoxy impregnated REBCO coils for an HTS MRI magnet
Griffin Bradford (FSU - NHMFL - ASC)
- Speaker at Thu-Af-Or19-05: Controllable Critical Current Degradation of ReBCO CC by Post-Manufacturing Annealing
Marco Breschi (University of Bologna)
- Speaker at Mon-Mo-Po1.03-04 [25]: Analysis of quench in the HL-LHC 11 T dipole model magnets with 1-D and 2-D models
Marco Breschi (University of Bologna)
- Speaker at Mon-Af-Po1.15-06 [38]: Expansion of the magnetic field in toroidal harmonics and correlations with the current distribution
Greg Brittles (Tokamak Energy)
- Speaker at Tue-Af-Po2.14-12 [11]: Testing of Quality Assessment (QA) HTS Magnets at Tokamak Energy
Justin Brooks (Robinson Research Institute)
- Speaker at Mon-Af-Po1.12-08 [15]: Numerical Modelling of Dynamic Resistance in Parallel Connected Stacks of ReBCO Tapes
Lucas Brouwer (Lawrence Berkeley National Laboratory)
- Speaker at Thu-Af-Or23-06: Design and Test of a Curved Superconducting Dipole Magnet for Proton Therapy
- Speaker at Wed-Af-Po3.20-02 [55]: No Insulation CCT Coils for Superconducting Accelerator Magnets
Carl Buehler (Bruker EST)
- Speaker at Wed-Af-Po3.21-03 [69]: Challenges and Perspectives of the Phase Formation of Internally Oxidized PIT-Type Conductors
Victor Bykov (Max-Planck Institute for Plasmaphysics)
- Speaker at Wed-Af-Po3.17-02 [30]: Cyclic behavior of Wendelstein 7-X magnet system during first two phases of operation
Nikolay Bykovskiy (CERN)
- Speaker at Mon-Af-Or5-05: Design of the BabyIAXO superconducting detector magnet system
- Speaker at Wed-Mo-Or12-03: Design, construction and test of thermally activated ReBCO switches
Yao Cai (Southwest Jiaotong University)
- Speaker at Thu-Mo-Po4.13-03 [99]: Semi-Analytical Calculation of Levitation and Guidance Forces in a Superconducting EDS Train
Chuanbing Cai (Shanghai University)
- Speaker at Wed-Af-Po3.19-06 [51]: Development of Cost-effective Secondary Generation High-temperature Superconducting REBaCuO Tapes for Power Applications
Valerio Calvelli (CEA)
- Speaker at Mon-Mo-Po1.04-05 [39]: Quench protection study for F2D2, the Flared-end Block Dipole Demonstrator for the Future Circular Collider
- Speaker at Tue-Mo-Po2.03-02 [10]: 2D and 3D Conceptual Magnetic Design of the MADMAX Dipole
Ciro Calzolaio (Paul Scherrer Institut)
- Speaker at Fri-Mo-Or25-03: Longitudinal gradient bend magnets for the upgrade of the Swiss Light Source storage ring
ruiwu cao
- Speaker at Tue-Mo-Po2.11-11 [97]: Investigation of High Temperature Superconducting Flux-Switching Motors with Different Secondary Structures
- Speaker at Tue-Mo-Po2.12-10 [108]: A new linear permanent magnet switched reluctance motor with segmented primary for urban rail transit
Zhiwei Cao (Huazhong University of Science and Technology)
- Speaker at Wed-Mo-Po3.09-05 [67]: Voltage Distribution Research on Flux-Coupling-Type SFCL
Francesca Cau (Fusion for Energy)
- Speaker at Mon-Mo-Po1.02-03 [15]: Update of Joule Losses Calculation in the ITER Cold Structures during Fast Plasma Transients
PABLO CAYADO (Karlsruhe Institute of Technology (KIT))
- Speaker at Tue-Mo-Po2.10-08 [80]: Improved performance at low temperatures of CSD-grown YxGd1-xBa2Cu3O7-BaHfO3 nanocomposite films
Yoon Seok Chae (Jeju National University)
- Speaker at Wed-Mo-Po3.06-06 [42]: Design and Analysis of a 10-MW-Class HTS Generator considering Various Winding Insulation Techniques for HTS Rotor-Field Poles
Zhao Chaoqun
- Speaker at Mon-Mo-Po1.10-08 [116]: Magnetic Levitation Characteristics of HTS bulk above new type of Electromagnets for HTS Maglev
Xavier CHAUD (Laboratoire National des Champs Magnétiques Intenses ‐ European Magnetic Field Laboratory, UPR3228 Centre National de la Recherche Scientifique, Univ. Grenoble ‐Alpes, Institut National des Sciences Appliquées de Toulouse, Univ. Paul Sabatier)
- Speaker at Fri-Mo-Or27-04: MI HTS Insert for Very High Field Magnet
Wei Chen (Southwest Jiaotong University)
- Speaker at Thu-Mo-Po4.05-07 [37]: Impact of Axial Tensile Strain on the Inhomogeneity of Critical Current for Bi-2212 Round Wire
- Speaker at Thu-Mo-Po4.05-08 [38]: Non-destructive evaluation of the critical current for Bi-2212 cable for fusion application
Qushan Chen (Huazhong University of Science and Technology)
- Speaker at Tue-Mo-Po2.08-07 [60]: Consideration of misalignment and fringe field of beamline elements in a proton therapy facility
Hao Chen (China University of Mining & Technology)
- Speaker at Tue-Af-Po2.20-08 [60]: A novel tubular switched reluctance linear machine shielding from end magnetic effect
- Speaker at Tue-Af-Po2.21-04 [68]: Three-dimensional Magnetic Equivalent Circuit Analysis of Double-sided Switched Reluctance Linear Machine
- Speaker at Wed-Mo-Po3.05-10 [36]: A Novel Permanent Magnet Linear Generator
- Speaker at Wed-Mo-Po3.12-11 [106]: A Novel Three-phase Tubular Switched Reluctance Linear Machine with Transverse-flux path
Long Chen (China Three Gorges University)
- Speaker at Mon-Mo-Po1.02-10 [22]: Design and Optimization of a High-frequency Rotational Magnetizer for Nanocrystalline Alloys Based on Improved SVM and PSO Algorithms
- Speaker at Mon-Mo-Po1.02-05 [17]: Stress Distribution of Magnetically Controlled Reactor Core in Gaps Area under Simulated Service Conditions
Yunyun Chen
- Speaker at Tue-Mo-Po2.12-04 [102]: Analysis and Design of a New Type of Less-rare-earth Hybrid-magnet Motor with Different Rotor Topologies
- Speaker at Tue-Mo-Po2.12-11 [109]: Analysis and Optimization of Less-rare-earth Hybrid Excitation Flux-switching Machine
Panpan Chen
- Speaker at Mon-Af-Po1.20-04 [77]: Experimental Study of Quench Performance for YBCO Coated Conductors
Jie Chen
- Speaker at Mon-Mo-Po1.01-06 [5]: Voltage Signal rate change of Quench Detection by Real-Time Least squares for HTS Tape and Coil
Lei Chen (Wuhan University)
- Speaker at Wed-Mo-Po3.09-10 [72]: Study on Coordination of Resistive SFCLs and Hybrid-Type Circuit Breakers to Protect a HVDC System with LCC and VSC Stations
- Speaker at Wed-Mo-Po3.09-11 [73]: Application Study of a Flux-Coupling-Type SFCL for Low-Voltage Ride-Through Operation of a Virtual Synchronous Generator
Guilun Chen (co author)
- Speaker at Wed-Mo-Po3.09-06 [68]: Technical and Economic Analysis of Resistive Superconducting Current Fault Limiter with Parallel Shunt Resistance
Huang Chen (University of Science and Technology of China)
- Speaker at Mon-Af-Po1.11-08 [8]: Development of a Bi-2212 Solenoid Insert Coil in a 14T Superconducting Magnet
yi wen chen (上海交通大学)
- Speaker at Wed-Af-Po3.22-04 [82]: A pulsed current based critical current measurement system for long REBCO coated conductors
Guilun Chen (Huazhong University of Science and Technology)
- Speaker at Tue-Mo-Po2.09-09 [71]: Performance Degradation of YBCO Tape Under Overcurrent Considering Different Heat Exchange Conditions
- Speaker at Wed-Mo-Po3.08-09 [59]: AC Loss Analysis of a 10-kV / 500-A Flux-coupling type Superconducting Fault Current Limiter
- Speaker at Wed-Mo-Po3.09-05 [67]: Voltage Distribution Research on Flux-Coupling-Type SFCL
Yi Cheng (Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.06-04 [42]: Comparison of Electromagnetic Performance of 10-MW HTS Double-Stator Flux Modulation Generators With Different Topologies for Offshore Direct-Drive Wind Turbines
- Speaker at Wed-Mo-Po3.13-08 [116]: Analysis of Novel Wound Field Flux Linear Reversal Machine with Multiple MMF Working Harmonics
- Speaker at Thu-Mo-Po4.08-04 [56]: Electromagnetic Design of HTS DC Generator with Iron-cored Stator and Rotor
- Speaker at Thu-Mo-Po4.08-06 [58]: Electromagnetic Design of an HTS Claw Pole Wind Generator
Junsheng Cheng (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.09-05 [67]: Research of Nb3Sn superconducting joint by powder metallurgy
Daniel Cheng
- Speaker at Thu-Mo-Or16-04: Mechanical performance of the first two prototype 4.5 m long Nb3Sn low-β quadrupole magnets for the Hi-Lumi LHC Upgrade
Maxime CHILETTI (CEA France)
- Speaker at Mon-Af-Po1.18-02 [59]: CICCs coupling losses: Analytical COLISEUM model enhancement and experimental cross-checks
T. W. Ching (University of Macau)
- Speaker at Wed-Mo-Po3.12-10 [105]: Design and Analysis of a Magnetless Linear Variable Reluctance Motor with Modular Mover Units for Electric Propulsion
- Speaker at Wed-Mo-Po3.13-07 [115]: Evaluation of Power Losses in High-temperature Superconducting Coils for Field-excited Electric Motors
Suyeon Cho (Korea Automotive Technology Institute)
- Speaker at Mon-Mo-Po1.07-09 [84]: Design of SMC core in Axial-Flux Motor with 3D Printing
- Speaker at Wed-Mo-Po3.12-06 [101]: A Study on Robust Design of Irreversible Demagnetization of IPMSM Rotor Core Using Dy-Free Permanent Magnet
Sukjin Choi (IBS)
- Speaker at Wed-Af-Po3.15-11 [15]: The Design of superconducting magnet for IF (In-flight Fragment) separator of RISP
Yojong Choi (Yonsei University, Seoul, Korea)
- Speaker at Mon-Mo-Po1.01-05 [4]: Quench protection method using current of magnetically coupled secondary coil for fast current reduction of superconducting magnet
- Speaker at Mon-Mo-Po1.01-07 [6]: Optimal Design and Performance Evaluation of Quench Protection System using Dual-capacitor Switching with Various Design Parameters for scale-up Test coil
- Speaker at Mon-Mo-Po1.01-12 [11]: Cenceptual Design and Performance of Quench Detection System for Super High Field Magnet Using Multi Receivers via Wireless Power Transfer Technology
Jongho Choi (Supercoil Co., Ltd.)
- Speaker at Thu-Af-Or21-03: Practical Design and Performance Analysis Results of the First MgB2 Magnets for Superconducting Induction Heater in Korea
HyeWon CHOI (CHOSUN University)
- Speaker at Thu-Mo-Po4.11-10 [83]: Characteristics of a Current-limiting DC circuit breaker with a superconducting coil applied to the commutation circuit
yong chu
- Speaker at Mon-Af-Po1.18-05 [62]: Design of Quench Protection System for K-DEMO TF Magnet
- Speaker at Mon-Af-Po1.18-08 [65]: Operational Analysis of KSTAR CS Magnet
Kookchae Chung (Korea Institute of Materials Science)
- Speaker at Wed-Af-Po3.25-11 [114]: Influence of chemical treatment of the raw precursors for the MgB2 superconducting applications
Yoon Do Chung (Suwon Science College)
- Speaker at Mon-Mo-Po1.01-12 [11]: Cenceptual Design and Performance of Quench Detection System for Super High Field Magnet Using Multi Receivers via Wireless Power Transfer Technology
ZOU CHUNLONG (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Tue-Af-Po2.18-09 [40]: The training test research of high stress superconducting magnet for 200 MeV superconducting cyclotron
Vicente Climente-Alarcon (University of Cambridge)
- Speaker at Wed-Af-Or15-05: Superconducting magnetic heterostructured components for electric motor applications
MT26 Conference Organizer (Centennial Conferences)
- Speaker at Tue-Af-Po2.17-04 [28]: Presentation withdrawn
Timothy Coombs (University of Cambridge)
- Speaker at Thu-Mo-PL5-01: Advances in Superconducting Rotating Machinery
- Speaker at Tue-Mo-Or9-06: Ultra-compact MRI System with High Temperature Superconducting Magnet
Chunyan Cui (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.14-07 [114]: Research of Position Detection and Magnetic Feedback on a Superconducting Levitation Sphere for Gravity Measurement
Chao Dai (Institute of Plasma Physics, Chinses Academy of Science)
- Speaker at Thu-Mo-Po4.02-05 [10]: Concept Design of magnet system of the large scale superconducting conductor test facility for future fusion reactor
- Speaker at Tue-Mo-Po2.06-01 [32]: Several Key Issues in 14 Tesla Whole body MRI Magnet development
- Speaker at Wed-Mo-Po3.10-01 [75]: Study of superconducting strands damage and mechanical characteristics by different shape of CICC conductors
Shaotao Dai (Beijing Jiaotong University)
- Speaker at Thu-Af-Or21-07: Development of a 220 kV/ 1.5kA Resistive Type Superconducting Fault Current Limiter
Masahiro Daibo (Iwate University)
- Speaker at Tue-Af-Po2.24-03 [102]: Poloidal Vector Potential Transformer
Haizheng Dang (Shanghai Institute of Technical Physics)
- Speaker at Mon-Mo-Po1.08-08 [94]: A long-life, high-capacity and high-efficiency cryogenic system based on the Stirling-type pulse tube cryocooler developed for high-Tc superconducting applications
Giorgio D'Angelo (CERN)
- Speaker at Mon-Mo-Po1.01-04 [3]: Performance of the Large Hadron Collider’s Cryogenic Bypass Diodes over the First Two Physics Runs, Future Projects and Perspectives
Laura D'Angelo (TU Darmstadt)
- Speaker at Mon-Af-Po1.16-02 [45]: Quasi-3D Thermal Simulation of Quench Propagation of Superconducting Magnets
Shen Danni (Nanjing University of Aeronautics and Astronautics)
- Speaker at Tue-Mo-Po2.12-10 [108]: A new linear permanent magnet switched reluctance motor with segmented primary for urban rail transit
Van Quan Dao (Changwon National University)
- Speaker at Wed-Mo-Po3.08-06 [58]: Conceptual design of a saturated iron core superconducting fault current limiter for a DC power system
Hu Daoyu (Shanghai Jiao Tong University)
- Speaker at Thu-Mo-Po4.13-08 [103]: Study on the EDS-Maglev System Based on Dynamic Circuit Theory
Daniel Davis (FSU/NHMFL)
- Speaker at Wed-Af-Or13-03: Performance, diagnostic, and quench measurements of a dipole composed of two racetrack coils wound with high temperature superconducting Bi-2212 Rutherford cable
Gudrun De Gersem (ASML)
- Speaker at Mon-Mo-Po1.07-05 [80]: Superconducting stage actuation
Pavel Degtyarenko (JIHT RAS)
- Speaker at Tue-Mo-Po2.09-01 [63]: Influence of GdBCO stoichiometry on the superconducting properties of industrial 2G HTS wire in magnetic field
Michael de Leon (Andong National University)
- Speaker at Thu-Mo-Po4.09-03 [65]: Evaluation of Joint Resistance and Electromechanical Properties in Various Type of Ultrasonic Weld CC Tape Joints
Cong Deng
- Speaker at Wed-Mo-Po3.12-05 [100]: A novel permanent magnet linear motor for the application of urban transit
Yuke Deng (Southwest Jiaotong University)
- Speaker at Tue-Af-Po2.16-01 [16]: Contactless Power Transfer for HTS Magnets with A Novel YBCO-coated Conductor Bridge as Rectifier
Andries den Ouden (Radboud University, Nijmegen, The Netherlands)
- Speaker at Thu-Mo-Or17-05: Progress in the construction of the Nijmegen 45T hybrid magnet system
Mark Angelo Diaz (Andong National University)
- Speaker at Wed-Af-Po3.25-09 [112]: Electromechanical Properties Evaluation of Various Multifilamentary MgB2 Wires
tonghai ding (Huazhong university of science and technology)
- Speaker at Tue-Af-Po2.24-05 [104]: Design and simulation of three-phase electromagnetic wiping device
Kaizhong Ding (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.05-01 [54]: Safety Research of the 100 kA HTS Current Lead for CFETR
- Speaker at Tue-Af-Po2.18-09 [40]: The training test research of high stress superconducting magnet for 200 MeV superconducting cyclotron
Yi Ding (SINAP CAS)
- Speaker at Wed-Af-Po3.16-07 [25]: Quench simulation of a REBCO undulator coil
Yuanbo Ding (HuaZhong University of Science and Technology)
- Speaker at Mon-Mo-Po1.07-06 [81]: Comparison and Optimization of Permanent Magnet Assisted Synchronous Reluctance Machine
Iain Dixon (Florida State University)
- Speaker at Tue-Af-Po2.14-10 [10]: Fatigue behavior of No-Insulation Coils with and without Reinforcing Co-Wind
Aldo Di Zenobio (ENEA)
- Speaker at Mon-Mo-Or1-01 [Invited]: The conceptual design of the DTT superconducting magnet system
QIHUAN DONG (UNIVERSITY OF CAMBRIDGE)
- Speaker at Mon-Af-Po1.19-06 [72]: Efficiency analysis and improvement of Transformer-rectifier flux pump for high current magnets
Fangliang DONG
- Speaker at Tue-Mo-Po2.11-02 [89]: Evaluation of Mechanical Properties of an On-board 2G HTS Magnet System for Maglev Applications
Pengxin DONG (Wuhan National High Magnetic Field Center)
- Speaker at Thu-Mo-Po4.01-03 [2]: Pulsed magnet design and fabrication for generating background magnetic field in pulse current driven forming
Zhuoyue Du
- Speaker at Tue-Mo-Po2.09-03 [65]: Design and electromagnetic characteristics study of YBCO cable for fast cycled accelerator magnet applications
Wei Du (Tsinghua University)
- Speaker at Tue-Af-Po2.22-09 [82]: Characteristics research on BSCCO HTS tapes with short-circuit impulse current impact at LNG cooling ambient temperature
Ho Ik Du (Chonbuk National University)
- Speaker at Wed-Mo-Po3.08-12 [62]: Study on the current limiting characteristics of YBCO coated conductor according to different stabilizer layer with iron core and coil
- Speaker at Wed-Mo-Po3.09-01 [63]: Fabrication and performance test of fault current limiting elements made of non-stabilizer coated conductors
- Speaker at Wed-Mo-Po3.09-02 [64]: Comparison of Fault Current Limiting Characteristics between the separated Three-phase Flux-lock Type SFCL and the Integrated Three-phase Flux-lock Type SFCL
Shuangsong Du
- Speaker at Tue-Af-Po2.18-09 [40]: The training test research of high stress superconducting magnet for 200 MeV superconducting cyclotron
Yi Du (Jiangsu University)
- Speaker at Tue-Af-Po2.21-03 [67]: Equivalent magnetic circuit analysis of doubly salient permanent magnet motor with Π-shaped stator iron core segments
Michal Duda (IFJ PAN)
- Speaker at Thu-Mo-Po4.02-02 [8]: Carpenter: superconducting magnet test facility management system
Alexey Dudarev (CERN)
- Speaker at Wed-Mo-Or12-04: Self-Protecting HTS Current Lead - Demonstration of a new technology
Maria Durante
- Speaker at Wed-Af-Po3.15-01 [5]: Ongoing Manufacturing of the EuCARD2 Roebel-based cos-theta magnet at CEA Saclay
Kate Edwards (Lawrence Berkeley National Laboratory)
- Speaker at Mon-Mo-Po1.02-07 [19]: User Defined ANSYS Elements for 3D Multiphysics Modeling of Superconducting Magnets
Martin Eibach (GSI)
- Speaker at Thu-Mo-Po4.03-01 [12]: Development of a radiation resistant magnetometer
Deyang Fan (Jiangsu University)
- Speaker at Tue-Af-Po2.20-09 [61]: Cogging Torque Reduction in Double-Rotor Hybrid Excited Axial Switched-Flux Permanent Magnet Machine
- Speaker at Tue-Mo-Po2.12-12 [110]: Design and Investigation of a Dual-Stator Flux-Modulated Permanent Magnet Motor with High Demagnetization Withstand Capability
- Speaker at Wed-Mo-Po3.12-01 [96]: Design of a Novel Axial Flux Rotor Consequent-Ploe Permanet Magnet Machine
- Speaker at Wed-Mo-Po3.13-01 [109]: Comparative Study of Permanent Magnet Assisted Linear Switched Reluctance Motor and Linear Flux Switching Permanent Magnet Motor for Railway Transportation
Wenjie Fan (Jiangsu univeristy school of electrical and informantion engineering)
- Speaker at Mon-Mo-Po1.06-01 [63]: Electromagnetic Performance Analysis of an Axial Flux Partitioned Stator Hybrid-excited less-rare-earth PM synchronous Machine
Zhen Fang (CHMFL)
- Speaker at Tue-Af-Po2.15-04 [15]: Redesign and Strength Check of 40T Hybrid Magnet Thermal Shield
Xiao Fang
- Speaker at Tue-Af-Po2.25-12 [121]: Detection of Underground Tower Base for Distribution Transmission Network Based on Transient Electromagnetic Method
- Speaker at Wed-Mo-Po3.04-07 [27]: Optimum Design of Continuously Workable Transcranial Magnetic Stimulator
philippe fazilleau (cea)
- Speaker at Tue-Mo-Po2.05-01 [24]: Analytical formulation of mechanical stresses in no-impregnated, multi-layer solenoids
Enrico Felcini (EPFL - Ecole Polytechnique Federale Lausanne (CH))
- Speaker at Thu-Af-Or23-07: Magnetic design of superconducting toroidal gantry for hadron therapy
Helene Felice (Université Paris-Saclay (FR))
- Speaker at Tu-Mo-PL2-01: Advances in Nb3Sn Superconducting Accelerator Magnets
- Speaker at Wed-Af-Po3.20-14 [66]: Magnet end shaping of the Future Circular Collider Main Quadrupole: optimization and validation
Walter Fietz (KIT)
- Speaker at Tue-Mo-Po2.09-04 [66]: Determination of the thermal resistance between pressed copper-copper and copper-stainless steel interfaces for high current HTS Cable-in-Conduit Conductors
- Speaker at Tue-Mo-Po2.09-06 [68]: Mechanical and electro-mechanical investigations of assembled HTS CroCo triplets
Arnaud Pascal Foussat (CERN)
- Speaker at Tue-Af-Po2.18-03 [35]: HL-LHC D2 Short model recombination dipole cold test results and analysis
- Speaker at Mon-Af-Po1.14-04 [30]: Mechanical characterisation of Nb3Sn cable insulation systems at ambient and cryogenic temperature used for HL-LHC accelerator magnets.
Junyu Fu (Huazhong University of Science and Technology)
- Speaker at Tue-Af-Po2.23-07 [94]: Design and experimental implementation of a novel electromagnetic stirring system for casting particle-reinforced aluminum matrix composites
Shinji Fujita (Fujikura Ltd.)
- Speaker at Tue-Mo-Po2.09-02 [64]: Mechanical properties of BaHfO3-doped EuBCO coated conductors fabricated by hot-wall PLD on IBAD template
joichiro fukui
- Speaker at Wed-Af-Po3.18-06 [42]: Improvement of Jc properties for Hf and La doped Gd123 films fabricated by fluorine-free MOD method
Kazuma Fukui (National Institutes for Quantum and Radiological Science and Technology)
- Speaker at Wed-Mo-Po3.03-02 [18]: Quench recovery analysis of the JT-60SA superconducting magnets
Frank Füllenbach (Max-Planck-Institut für Plasmaphysik)
- Speaker at Thu-Mo-Po4.03-11 [22]: Implementation and first operational experiences with the high voltage In-Service-Tests on the superconducting magnet system of Wendelstein 7-X
Takuma Furukawa (Kyushu University)
- Speaker at Mon-Af-Po1.12-10 [17]: Additional AC loss properties of three-strand parallel conductors composed of Y-based superconducting tapes
Yasuhiro Fuwa (Kyoto University)
- Speaker at Tue-Mo-Po2.04-04 [18]: Three-Dimensional Design of Massless Septum Magnets for High Intensity Synchrotrons with Slow Beam Extraction
Yasuhiro Fuwa (Kyoto University)
- Speaker at Tue-Mo-Po2.08-09 [62]: Magnetic Property of Praseodymium Permanent Magnet at Cryogenic Temperature
Yuting Gao (Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.06-04 [42]: Comparison of Electromagnetic Performance of 10-MW HTS Double-Stator Flux Modulation Generators With Different Topologies for Offshore Direct-Drive Wind Turbines
- Speaker at Thu-Mo-Po4.08-06 [58]: Electromagnetic Design of an HTS Claw Pole Wind Generator
Peifeng Gao (Lanzhou University)
- Speaker at Tue-Mo-Or8-05: Effect of thermal mismatch stress and electromagnetic loads on delamination in REBCO coated conductors
Yuting Gao (Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.08-04 [56]: Electromagnetic Design of HTS DC Generator with Iron-cored Stator and Rotor
Jiani Gao (PSI - Paul Scherrer Institut)
- Speaker at Thu-Af-Or20-02: Modeling and Experimental Validation of Quench Protection Concepts for Canted-Cosine-Theta Type High-Field Magnets
Laura Garcia Fajardo (Lawrence Berkeley National Laboratory)
- Speaker at Fri-Mo-Or25-04: Fabrication and test of Bi-2212 Canted-Cosine-Theta coils
Luis Garcia-Tabares (CIEMAT)
- Speaker at Thu-Mo-Or18-05: New Type of Linear Switched Reluctance Generator for Wave Energy Applications
- Speaker at Thu-Af-Or22-03: Cold tests of the first nested orbit corrector prototype for HL-LHC
ATUL GARG (INSTITUTE FOR PLASMA RESEARCH)
- Speaker at Thu-Mo-Po4.10-01 [69]: Comparative study of cryogenic NbTi/Cu and MgB2/Brass based current leads
James Gawith (University of Cambridge)
- Speaker at Wed-Mo-Or12-02: HTS Switch for use in Flux Pumps
- Speaker at Wed-Mo-PL4-05: Flux Pumps
Lorenzo Giannini (ENEA)
- Speaker at Wed-Mo-Po3.01-05 [5]: Magnetostructural calculations and design study of the DTT central solenoid
Bartlomiej Glowacki (University of Cambridge)
- Speaker at Thu-Mo-Or18-06: High temperature superconducting hybrid tape stacks - an enabling technology: challenges for DC and AC applications
Byeong-Soo Go (Changwon National University)
- Speaker at Thu-Mo-Po4.06-05 [43]: Design and feasibility study of a performance evaluation system for a large-scale HTS generator under short-circuit conditions
Fedor Gömöry (Slovak Academy of Sciences)
- Speaker at Mon-Mo-Or3-02: Overall critical current in tapes and devices made from superconductors with critical current fluctuating along the wire length
- Speaker at Thu-Af-Or24-07: Small solenoid made from round HTS superconducting cable
Tianyong Gong (Southwest Jiaotong University)
- Speaker at Thu-Mo-Po4.13-02 [98]: Design optimization of a real-scale REBCO magnet with stepped cross-section shape and its application to EDS train
Adrian Gonzalez-Parada (University of Guanajuato)
- Speaker at Wed-Mo-Po3.12-04 [99]: Comparative Analysis of a Linear Electric Motor using Superconducting and Conventional Conductor Coil
- Speaker at Wed-Mo-Po3.13-06 [114]: Electromagnetic performance of HTS linear generator under Field-Cooled and Zero-Field-Cooled condition
Jisung Goo (Korea Polytechnic University)
- Speaker at Mon-Af-Po1.12-07 [14]: Magnetization Loss estimation of HTS Solenoid Coils wound with striated CORC
Jeremy Good (Cryogenic Ltd)
- Speaker at Tue-Mo-Po2.01-01 [1]: A large scale cryogen-free magnet for neutron decay research
Michael Green (Michigan State University)
- Speaker at Wed-Af-Po3.16-08 [26]: Quench Protection of Insulated HTS Magnets by inducing a Current Surge within the Magnet
Francesco Grilli (Karlsruhe Institute of Technology)
- Speaker at Wed-Mo-Or11-04: Magnetic vector potential-based formulations for modeling superconducting applications: a valid alternative to the H-formulation
Simone Grillo (ASG Superconductors)
- Speaker at Tue-Mo-Po2.03-10 [15]: Design and Manufacturing Assessment of a Multi-purpose Detector for NICA Collider
Hui-Seok Gu (CHOSUN University)
- Speaker at Tue-Af-Po2.24-12 [111]: High Coupling Characteristics of Resonance Coil for Superconducting Wireless Power Transfer
Wang Guangda (HUST)
- Speaker at Tue-Af-Po2.14-04 [4]: The Effect of Turn-to-Turn Contact Resistance on the Electrical Characteristic and Thermal Stability of 2G HTS Pancake Coils
Qiang Guo (WST)
- Speaker at Tue-Mo-Po2.13-06 [113]: Study on High Jc and Low AC Losses NbTi/Cu5Ni Superconducting Wire for HIAF Magnets during recently years in WST
shuqiang guo (Huazhong University of Science and technology)
- Speaker at Mon-Af-Po1.12-09 [16]: Analysis of AC Loss of Annular Magnet Based on 3D Model and Reduced-Dimensional Inversion
Zichuan Guo (Institute of Plasma Physics Chinese Academy of Sciences)
- Speaker at Wed-Mo-Po3.10-01 [75]: Study of superconducting strands damage and mechanical characteristics by different shape of CICC conductors
Liang Guo
- Speaker at Wed-Af-Po3.24-05 [99]: Manufacture and performance test of High Temperature Superconducting Coils for 3.5T Magnetic Separation
Ramesh Gupta (BNL)
- Speaker at Magnet Technology Development for High-field Accelerator Magnets
- Speaker at Wed-Af-Or13-02 [Invited]: New Approach and Test Facility for High Field Accelerator Magnets R&D
Seungyong Hahn (Seoul National University)
- Speaker at Fri-Mo-Or27-01: Current Status and Challenges in No-Insulation HTS Magnet Technology
Ke Han
- Speaker at Thu-Mo-Po4.01-07 [6]: Properties of Selected High-strength Composite Conductors
Seunghak Han (Yonsei University)
- Speaker at Tue-Af-Po2.16-06 [20]: Charging Characteristics of HTS Coils with Various Insulation Materials by Charging of Rotary HTS Flux Pump
TAEHEE HAN (Jungwon University)
- Speaker at Mon-Af-Po1.23-09 [118]: Fault Current Limiting Characteristics of Three Phase Transformer Type Superconducting Fault Current Limiter using Two Insulated Secondary Circuits
Wenjie Han (Huazhong University of Science and Technology)
- Speaker at Mon-Af-Po1.19-01 [67]: Design and test of the power supply for a fast kicker magnet
- Speaker at Wed-Af-Po3.20-05 [58]: Design considerations of an alternating-gradient canted-cosine-theta superconducting magnet applied to proton therapy
- Speaker at Wed-Mo-Po3.04-01 [21]: Design and development of beamline system for a proton therapy facility
Xiaotao Han (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.01-02 [1]: A uniform pressure actuator with high forming efficiency based on the pulsed magnet manufacturing technique
Houxiang HAN
- Speaker at Mon-Mo-Po1.05-03 [56]: Fabrication Status of CFETR Central Solenoid Model Coil
Zach Hartwig (Commonwealth Fusion Systems)
- Speaker at Ultra-high-field Fusion - CFS
Shoichi Hatakeyama (National Institutes for Quantum and Radiological Science and Technology)
- Speaker at Tue-Af-Po2.16-10 [24]: Transient Analysis of AC Power System for JT-60SA Superconducting Magnets
Timothy Haugan (U.S. Air Force Research Laboratory)
- Speaker at Thu-Af-Or21-04: Development of Superconducting-Magnetic-Energy-Storage (SMES) for Aerospace Applications
Drew Hazelton (SuperPower Inc.)
- Speaker at Thu-Af-Or19-01: Progress of SuperPower 2G HTS (RE)BCO Conductor Development for Magnet Applications
Htutzaw Hein (State Key Laboratory of Reliability and intelligence of Electrical Equipment, Hebei University of Technology, 300130 Tianjin, China)
- Speaker at Tue-Af-Po2.19-06 [47]: Calculation of Iron Losses for Soft Magnetic Materials Under Sinusoidal Pulse Width Modulation (SPWM)
Sebastian HELLMANN (Paul Scherrer Institut)
- Speaker at Wed-Af-Po3.16-06 [24]: Numerical Design Optimisation of Short-Period HTS Staggered Array Undulators
Kohei Higashikawa (Kyushu University)
- Speaker at Thu-Af-Or21-05: Potential of Long Solenoid Coil as Superconducting Cable with Energy Storage Function
- Speaker at Wed-Mo-Po3.07-03 [45]: Measurement and Analysis on Local Magnetization Properties of RE-123 Coated Conductor with DC Transport Current and External Magnetic Field
Yoshimitsu Hishinuma (National Institute for Fusion Science)
- Speaker at Wed-Af-Po3.21-04 [70]: Mechanical strength evaluation of the internal matrix reinforced Nb3Sn multifilamentary wire using Cu-Sn-In ternary alloy matrix
Wei Hong
- Speaker at Mon-Mo-Po1.10-10 [118]: Design of a Fan-shaped Electromagnetic Guideway for HTS Maglev and Analysis of its Performances
- Speaker at Wed-Mo-Po3.08-02 [54]: Modelling and experimental verification of dc inductive superconducting fault current limiter
Zhilong Hou
- Speaker at Wed-Af-Po3.17-05 [33]: Mechanical Design and Analysis of Capture Superconducting Magnet for EMuS
Qiang Hu (Institute of Modern Physics of Chinese Academy of Science)
- Speaker at Mon-Mo-Po1.02-06 [18]: Magneto-Mechanical Analysis of A Racetrack Superconducting Magnet Using Multiscale Approach
Lei Hu (Beijing Jiaotong University)
- Speaker at Tue-Af-Po2.23-11 [98]: Experimental research on conduction cooling of superconducting induction heating magnet
Liangbing Hu (Institute of Plasma Physics,Chinese Academy of Sciences)
- Speaker at Wed-Mo-Po3.03-03 [19]: Alarm and interlock system in cryogenic system of EAST
Xinning Hu (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.14-05 [112]: A superconducting magnetic and electrostatic hybrid suspension and feedback system for gravity measurement
- Speaker at Thu-Mo-Po4.14-06 [113]: Effect of magnetic field attenuation due to superconducting joint resistance during gravity measurement
Linwei Hu (Huazhong University of Science and Technology)
- Speaker at Mon-Mo-Po1.07-11 [86]: Analysis of Characteristics of Permanent Magnet Synchronous Machines with Novel Topology of Fractional-Slot Concentrated Winding
Yifeng Hua (Jiangsu univeristy school of electrical and information engineering)
- Speaker at Tue-Mo-Po2.11-09 [95]: Unbalanced magnetic force and vibration analysis of dual mechanical port flux switching PM machine considering rotor eccentricity
Lei Huang (Southeast University)
- Speaker at Thu-Mo-Po4.06-01 [39]: Analysis of a Double-sides Stator-PM Linear Generator for Wave Energy Conversion
Weihua Huang (Huazhong University of Science and Technology)
- Speaker at Mon-Mo-Po1.06-07 [69]: Demagnetization Analysis and Design Optimization of Permanent Magnet Synchronous Motor for Electric Power Steering Applications
Zhen Huang (Shanghai Jiao Tong University)
- Speaker at Tue-Mo-Po2.11-01 [88]: Design and Analysis of an HTS Synchronous Motor with a Hybrid Magnets Rotor
- Speaker at Wed-Mo-Po3.05-11 [37]: Fully Coupled Numerical Method for Coated Conductor HTS Coils in HTS Machine
PengCheng Huang (Chinese Academy of Sciences)
- Speaker at Tue-Mo-Po2.01-02 [2]: Development of An 10 T Superconducting Split Magnet for X-ray Diffractometer
lantao huang
- Speaker at Tue-Af-Po2.25-04 [115]: A Finite Element Study on the Distribution and Variation of the Eddy Current in Electromagnetic Sheet Free Bulging
Seonho Hwang (Chosun university)
- Speaker at Thu-Mo-Po4.11-08 [81]: Analysis of the recovery characteristics of superconducting coupled DC circuit breakers during reclosing operation
Young Jin Hwang (Korea Basic Science Institute)
- Speaker at Tue-Af-Po2.23-08 [95]: Design and Fabrication of a Laboratory Electromagnet applying HTS Coils
Takuma Ichikawa (university)
- Speaker at Mon-Mo-Po1.01-11 [10]: Experimental study on quench protection of HTS magnet composed of multiple pancake-coils by use of auxiliary resistive shunt loop method
Masami Iio (High Energy Accelerator Research Organization (KEK))
- Speaker at Wed-Af-Po3.15-06 [10]: Research and development of future radiation resistant accelerator magnets based on high temperature superconductors
Kikelomo Ijagbemi (National High Magnetic Field Laboratory)
- Speaker at Wed-Mo-Po3.12-13 [108]: Application of AC Loss on HTS Magnet using Frequency Loss Induced Quench (FLIQ) Protection System.
Veronica Ilardi (Twente Technical University (NL))
- Speaker at Wed-Mo-Or12-05: Conceptual design of the cryostat for a highly radiation transparent 2 T superconducting detector solenoid for FCC-ee
Chaemin Im (Seoul National University)
- Speaker at Wed-Mo-Po3.11-04 [91]: A Lumped Circuit Model for No-Insulation Pancake Coil to Consider Fast Electromagnetic Quench Propagation
Ryota Inoue (Tohoku University)
- Speaker at Mon-Af-Po1.23-11 [120]: HTS Coil Structure Suitable for High-Power Transmission in a Short-Time in Wireless Power Transmission System for Railway Vehicle
Atsushi Ishiyama (Waseda University)
- Speaker at Mon-Af-Po1.20-07 [80]: Influence of coil size and operating temperature on transient stability in multi-stacked no-insulation REBCO pancake coil system
Sasha Ishmael (Lupine Materials and Technology)
- Speaker at Thu-Af-Or20-01 [Invited]: Quench detection via Rayleigh backscattering interrogated optical fibers
Yury Ivanyushenkov (ANL)
- Speaker at Fri-Mo-Or25-01: Progress in the development of superconducting undulators at the Advanced Photon Source
Yoshihisa Iwashita
- Speaker at Tue-Mo-Po2.08-08 [61]: Correction magnet with Permanent magnets
- Speaker at Tue-Mo-Po2.08-09 [62]: Magnetic Property of Praseodymium Permanent Magnet at Cryogenic Temperature
Jae young Jang (Korea Basic Science Institute)
- Speaker at Mon-Af-Po1.15-12 [43]: Design and Quench Analysis Study on a 9 T NbTi Superconducting Magnet for Large Bore EMPS
- Speaker at Thu-Af-Or23-03: Operation and Performance Evaluation of a Conduction-Cooled 400 MHz/66-mm Metal-Clad No-Insulation All-REBCO NMR Magnet
Se-Hun Jang (Kiswire Advanced Technology Ltd)
- Speaker at Wed-Af-Po3.25-10 [113]: Enhancement of high field Jc of MgB2 superconductors by carbon doping through coating process
Hyungkwan Jang (Hanyang University)
- Speaker at Mon-Af-Po1.21-13 [100]: Design of New Novel Shape Rotor by Inductance Changes for Power Improvement and Extended Operating Range
- Speaker at Mon-Mo-Po1.06-10 [72]: A study on the design of BLDC Slot-less PM motor using Response Surface Method
- Speaker at Mon-Mo-Po1.06-11 [73]: A Study on the Design of IPMSM for Reliability of Demagnetization Characteristics-based Rotor
- Speaker at Mon-Mo-Po1.06-13 [75]: Design of High Torque Density Magnet Coupling Using Halbach Magnet Array Structure
- Speaker at Tue-Af-Po2.20-04 [56]: Low-Weight Design Method of Electric Outboard PM Motor for Small Leisure Boat
- Speaker at Tue-Af-Po2.21-01 [65]: Inductance tracking Method for Interior Permanent Magnet Synchronous Motor by Electric Torque Estimator
- Speaker at Tue-Mo-Po2.11-12 [98]: A Study on the Shape Design of a Magnetic-Geared Synchronous Motor for Improvement of Performance and Securing Rigidity
- Speaker at Tue-Mo-Po2.12-09 [107]: Proposed Commutation Method for Performance Improvement of Brushless DC Motor
- Speaker at Wed-Mo-Po3.12-09 [104]: Study on Reduction of Eddy Current Loss of Permanent Magnets in Ultra-High Speed Machines
- Speaker at Mon-Mo-Po1.07-01 [76]: Study on Analysis Method of Asymmetric Permanent Magnet Assistance Synchronous Reluctance Motor Considering Magnetic Neutral Plane Shift
- Speaker at Tue-Af-Po2.21-02 [66]: Thermal-Electromagnetic Design of ISG WFSM Motor for Vehicle Considering Cooling System
- Speaker at Tue-Af-Po2.21-08 [71]: Considering axial phenomenon, axial permanent magnet segment motor Analysis.
Gang-Hyeon Jang (Chungnam National University, Korea)
- Speaker at Mon-Mo-Po1.07-12 [87]: Design and Experimental Verification of Limited Angle Rotary Torque PM Motor for Control Valve with Self-Alignment Characteristic
Olivier Jay (LNCMI-CNRS)
- Speaker at Mon-Af-Or4-05: Cold Spray materials for high field magnets at the LNCMI
Haeryong Jeon (Yonsei University)
- Speaker at Mon-Af-Po1.16-03 [46]: Quench Detection of High-Temperature Superconducting Magnet using Unsupervised Learning Method
minkyung jeong (Korea National University of Transportation)
- Speaker at Mon-Af-Po1.14-01 [27]: A Study on the Dielectric Characteristics of Epoxy Resin according to Surface Roughness
Sangkwon Jeong (KAIST)
- Speaker at Mon-Mo-Po1.08-09 [95]: AC operation characteristics of conduction-cooled HTS magnet for ADR
Min-Jae Jeong
- Speaker at Mon-Mo-Po1.07-09 [84]: Design of SMC core in Axial-Flux Motor with 3D Printing
- Speaker at Wed-Mo-Po3.12-06 [101]: A Study on Robust Design of Irreversible Demagnetization of IPMSM Rotor Core Using Dy-Free Permanent Magnet
Matthew C. Jewell (Materials Science Center, University of Wisconsin-Eau Claire)
- Speaker at Wed-Mo-Po3.10-04 [78]: Post-mortem mechanical investigation of ITER TF conductor samples after heat treatment and SULTAN testing
song jian (Institute of Plasma Physics Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.05-07 [60]: The CFETR CSMC Nb3Sn coil heat treatment process research
Can Jiang (Huazhong University of Science and Technology)
- Speaker at Tue-Af-Po2.24-10 [109]: A hybrid compensation method for ICT high voltage power supply
Libin Jiang (Lanzhou University)
- Speaker at Wed-Af-Po3.17-06 [34]: The Mechanical Analysis of the Rutherford Cable Subjected to Axial Tension
Zhenan Jiang (Victoria University of Wellington)
- Speaker at Mon-Af-Po1.23-07 [116]: AC loss calculation on a 6.5 MVA HTS traction transformer with hybrid winding structure
Donghui Jiang
- Speaker at Tue-Af-Po2.24-07 [106]: Magnetic lens effect analysis of high temperature superconductors by finite element software
- Speaker at Wed-Af-Po3.24-04 [98]: Design and research of a REBCO plate-stacked coil
Min Jiang (Jiangsu univeristy school of electrical and information engineering)
- Speaker at Mon-Af-Po1.21-06 [93]: Research on the positive airgap harmonics for a flux-modulated permanent magnet motor
Marc Jimenez (Fusion For Energy)
- Speaker at Fri-Mo-Or26-03: Current Centre Line integration in the manufacturing process of the ITER Toroidal Field Coils
- Speaker at Mon-Af-Po1.17-03 [55]: Comparison of FEM Predicted and Measured values of the TF coil closure welding distortion
Xinzhe Jin (Muroran Institute of Technology)
- Speaker at Thu-Mo-Po4.09-01 [63]: Joint properties for RE123-coated conductor in CJMB method
- Speaker at Tue-Mo-Or8-06: Bi2223 persistent current coil with superconducting joint fabricated by JIM method
- Speaker at Tue-Mo-Po2.10-06 [78]: Extra fine filamentation with width below 100 μm by ESPC method in RE123 split wire
rao jin (Nanjing University of Science and Technology)
- Speaker at Thu-Mo-Po4.11-03 [76]: Design and Performance Evaluation of a REBCO NI-SFCL applied in Short-Circuit Faults Occurred in 350 kV Flexible DC transmission
Chang-Sung Jin (Wonkwang University)
- Speaker at Tue-Mo-Po2.12-09 [107]: Proposed Commutation Method for Performance Improvement of Brushless DC Motor
Huan Jin
- Speaker at Thu-Mo-Po4.05-02 [32]: Structure material performance evaluation for Bi2212 CICC conductor
Shresht Joshi (Brookhaven National Laboratory)
- Speaker at Thu-Mo-Or17-07: Winding and 77 K Testing of Non-Insulated Coils for the IBS 25 T, 100 mm bore HTS Solenoid
- Speaker at Tue-Mo-Or8-03: Measurements of the Effect of Compressive Load on the Narrow Side of the HTS Tape
Mariusz Juchno (LBNL)
- Speaker at Wed-Af-Po3.16-03 [21]: Conceptual Design of a Superbend Magnet for Advance Light Source Upgrade Project
HO-CHANG JUNG (Korea Automotive Technology Institute)
- Speaker at Tue-Af-Po2.20-01 [54]: An Optimal Design to Prevent Demagnetization of Dy-free Magnet for a Traction Motor
- Speaker at Tue-Af-Po2.21-10 [73]: Optimization Method to Maximize Efficiency of a Drive Motor with Electrical Winding Changeover Technic for Hybrid EV
- Speaker at Wed-Mo-Po3.05-08 [35]: Maximizing Efficiency of IPMSG in the Engine Generator System of a Plug-in Hybrid EV and Its Comparison with SPMSG
Hideki Kajitani (National Institutes for Quantum and Radiological Science and Te)
- Speaker at Fri-Mo-Or26-01 [Invited]: Progress of ITER TF coil fabrication in Japan
Hiroharu Kamada (Meiji University)
- Speaker at Thu-Mo-Po4.12-03 [90]: Development of a 1-T Class Force-Balanced Helical Coils Using REBCO Tapes
changtao kan
- Speaker at Wed-Af-Po3.15-02 [6]: Bending properties of quasi-isotropic strands made by 2G wires at 77 K
- Speaker at Wed-Af-Po3.19-02 [48]: Performance Test of a Geometrically Symmetrical Strand Fabricated by 2G Wires at 4.2 K
Seung-Gu Kang (SungKyunKwan University)
- Speaker at Mon-Mo-Po1.06-02 [64]: Study on Performance and Irreversible Demagnetization according to rotor-teeth of SPMSM
dohyun kang (Sungkyunkwan University)
- Speaker at Wed-Mo-Po3.06-03 [39]: Design of a HTS Field Winding Vernier Machine with HTS bulks on Flux Modulation Pole
Byungsu Kang (Kyungpook National University)
- Speaker at Tue-Af-Po2.24-06 [105]: Verification of an Efficient Closed Loop Degaussing Technique for a Ferromagnetic ship
Yury Karasev (SС"A.A.Bochvar High-technology Scientific Research Institute of)
- Speaker at Tue-Mo-Po2.13-05 [112]: The Superconducting NbTi Wirе for the Superconducting Dipole Magnet for CBM Experiment at FAIR
Anna Kario (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Speaker at Thu-Af-Or22-05: FAIR’s first SIS100 Accelerator Quadrupole Doublet Module – Manufacturing Update and Test
VLADIMIR KASHIKHIN (Fermilab)
- Speaker at Tue-Mo-Po2.03-01 [9]: Conceptual Design of DUNE Near Detector Superconducting Magnet System
- Speaker at Wed-Af-Po3.15-07 [11]: HTS Quadrupole Magnet for the Persistent Current Mode Operation
David Kashy (Jefferson Lab)
- Speaker at Tue-Mo-Po2.03-08 [14]: An investigation of the electromagnetic Interactions between the CLAS12 Torus and Solenoid Superconducting Magnets at Jefferson Lab
Goki Kawasaki (Kyushu University)
- Speaker at Mon-Af-Po1.23-02 [111]: Design and Analysis of 6.9/1.0 kV-10 MVA Lightweight Superconducting Transformers with REBCO Coated Conductors
Ibrahim Kesgin (Argonne National Laboratory)
- Speaker at Wed-Af-Po3.16-05 [23]: Development of a Nb3Sn superconducting undulator for the Advanced Photon Source
- Speaker at Wed-Mo-PL4-06:Development of Superconducting Undulators
Kim Kihyun (Korea University)
- Speaker at Tue-Af-Po2.22-03 [77]: Investigation on the Thermal and Electrical Characteristics of GdBCO Magnet Using Intentional Bypass Current Path
Akihiro Kikuchi (NIMS)
- Speaker at Tue-Mo-Po2.13-08 [115]: Investigation of the Tape Shaped RHQT-Processed Nb3Al Conductors
Sun-Jin Kim (Hanyang University)
- Speaker at Mon-Af-Po1.23-03 [112]: Assessment of Dielectric Breakdown Characteristics of Nomex Paper under High Frequency Overvoltages for Superconducting Power Transformer Application
Won-Ho Kim (Gachon University)
- Speaker at Mon-Af-Po1.21-10 [97]: Design of 8p12s IPMSM for Minimization of Electromagnetic Noise and Vibration
- Speaker at Mon-Mo-Po1.06-08 [70]: A Study on the NVH Characteristic Analysis of a Teeth-Concentrated Winding Motor
- Speaker at Mon-Mo-Po1.07-04 [79]: The Study on the rotor design for LSPMSM considering the Starting Torque and Magnetic Saturation
- Speaker at Mon-Mo-Po1.07-07 [82]: Stator MMF Equation of Three-phase Motor Considering Sub-Harmonics for Analyzing Electromagnetic Vibration
Chang-Woo Kim (Chungnam National University)
- Speaker at Tue-Mo-Po2.11-03 [90]: Dynamic Characteristics Analysis Considering Instantaneous Inductance According to Mover Position of Flat-type Permanent Magnet Linear Oscillating Machines
Changhyun Kim (Changwon National University)
- Speaker at Thu-Mo-Po4.06-06 [44]: Design and property analysis of a performance evaluation system for HTS wind power generators
byungchan kim (keimyung university)
- Speaker at Mon-Mo-Po1.07-03 [78]: A Study on the effect of Eddy Current Loss and Demagnetization Characteristics by the Direction of Magnet division
- Speaker at Mon-Mo-Po1.07-10 [85]: Optimized design of segmented magnet considering demagnetization and vibration analysis of IPMSG for ISG
- Speaker at Wed-Mo-Po3.12-08 [103]: A study on the magnet structure for reducing demagnetization by grain boundary diffusion method
Ho-Sup Kim (Korea Electrotechnology Research Institute)
- Speaker at Wed-Af-Po3.18-07 [43]: The study of pinning center formation in Sm1Ba2Cu3O7-d coated conductor by reactive-co evaporation method
Hyunwoo Kim
- Speaker at Mon-Af-Po1.21-02 [89]: Analysis of Design and Mechanical Properties of AISG with Brush and Slip-Ring Structure
- Speaker at Mon-Mo-Po1.06-09 [71]: A study on IE5 class synchronous reluctance motor design using Co-analysis
- Speaker at Mon-Mo-Po1.06-10 [72]: A study on the design of BLDC Slot-less PM motor using Response Surface Method
- Speaker at Mon-Mo-Po1.06-11 [73]: A Study on the Design of IPMSM for Reliability of Demagnetization Characteristics-based Rotor
- Speaker at Mon-Mo-Po1.06-12 [74]: Design of Coreless PM motor using with non-magnetic tooth-slot structures using 3D printing technology
- Speaker at Mon-Mo-Po1.06-13 [75]: Design of High Torque Density Magnet Coupling Using Halbach Magnet Array Structure
- Speaker at Mon-Mo-Po1.07-01 [76]: Study on Analysis Method of Asymmetric Permanent Magnet Assistance Synchronous Reluctance Motor Considering Magnetic Neutral Plane Shift
- Speaker at Mon-Mo-Po1.07-02 [77]: Study on Inter-turn Fault Diagnosis of the Six-Phase Interior Permanent Magnet Synchronous Motor Using d-Axis Current
- Speaker at Tue-Af-Po2.21-01 [65]: Inductance tracking Method for Interior Permanent Magnet Synchronous Motor by Electric Torque Estimator
- Speaker at Tue-Mo-Po2.11-12 [98]: A Study on the Shape Design of a Magnetic-Geared Synchronous Motor for Improvement of Performance and Securing Rigidity
- Speaker at Wed-Mo-Po3.13-03 [111]: Ferrite PM Optimization of SPM BLDC Motor for Oil-Pump Applications According to Magnetization Direction
- Speaker at Wed-Mo-Po3.13-04 [112]: A Study on Design of Hybrid Type Electromagnet for Maglev
- Speaker at Mon-Af-Po1.21-04 [91]: A study on Improvement of Power Density and Efficiency of Permanent Magnet BLDC motor
- Speaker at Tue-Af-Po2.21-02 [66]: Thermal-Electromagnetic Design of ISG WFSM Motor for Vehicle Considering Cooling System
- Speaker at Tue-Mo-Po2.12-01 [99]: Efficiency Improvement of Permanent Magnet BLDC with Halbach Magnet Array for Drone
Jaemin Kim (Seoul National University)
- Speaker at Mon-Af-Po1.13-04 [24]: Design and Analysis of a Multi-Bore NMR Magnet Array
- Speaker at Wed-Af-Po3.24-02 [96]: Design, Construction and Test of a Double-Pancake Coil wound with Kilometer Long REBCO tape
Kwang Lok Kim (National High Magnetic Field Laboratory)
- Speaker at Tue-Af-Po2.14-02 [2]: Design and Performance Estimation of a 20 T No-Insulation all-REBCO User Magnet
- Speaker at Tue-Af-Po2.14-08 [8]: Study of Screening Currents in No-Insulation REBCO Magnets
DONG-HO KIM
- Speaker at Wed-Mo-Po3.13-05 [113]: Study on The Novel Design Process of Working Bar of Double Cage Induction Motor
- Speaker at Wed-Mo-Po3.13-10 [118]: Study on The Novel Rotor Core of Induction Motor with Cross Lamination
SEOKBEOM KIM (Okayama University)
- Speaker at Mon-Af-Po1.20-06 [79]: Study on the effect of metallic protection ring in no-insulation HTS coils
Jimin Kim (Korea University)
- Speaker at Tue-Mo-Po2.05-06 [29]: Frictional Force Effects Between Superconducting Tapes on Stress–Strain Characteristics of GdBCO Magnets
Junseong Kim (Electrical and Electronic Engineering, Yonsei University)
- Speaker at Wed-Af-Po3.15-10 [14]: Experimental test of the Magnetic Field Active Shimming Method for the Air-core HTS Quadruple Magnet
Youngjae Kim (Applied Superconductivity Center, National High Magnetic Field Laboratory, Florida State University)
- Speaker at Mon-Mo-Or2-04: Bi-2212 Coil Technology Development Efforts at the National High Magnetic Field Laboratory
Won-Ho Kim
- Speaker at Mon-Mo-Po1.07-09 [84]: Design of SMC core in Axial-Flux Motor with 3D Printing
- Speaker at Wed-Mo-Po3.12-06 [101]: A Study on Robust Design of Irreversible Demagnetization of IPMSM Rotor Core Using Dy-Free Permanent Magnet
Dae-Woo Kim (SUNGKYUNKWAN UNIVERSITY)
- Speaker at Wed-Mo-Po3.12-07 [102]: Design of IPMSM for Electric Oil Pump considering PM Irreversible Demagnetization at Saturation Temperature
Hyung-Wook Kim (Korea Electrotechnology Research Institute)
- Speaker at Tue-Af-Po2.22-02 [76]: Smart Insulation that Enables Calculation of Operating Current of ReBCO Coil
Jiman Kim (Kiswire Advanced Technology)
- Speaker at Tue-Mo-Po2.07-06 [46]: A Study on the Effects of Iron Diffusion Barrier on the Magnetic Field Characteristics of MgB2 Coil
Kihyun Kim (Korea University)
- Speaker at Tue-Mo-Po2.07-03 [43]: Charging, Discharging, and Over-current Characteristics of Partially Insulated MgB2 Magnet Using Cr-coated MgB2 Wires
Ji Hyung Kim (Jeju National University)
- Speaker at Wed-Mo-Po3.06-01 [38]: Design and Performance Test of an 1-kW-class HTS Generator with HTS Contactless Rotary Excitation Device
Sung-Kyu Kim (Korea Electrotechnology Research Institute)
- Speaker at Wed-Mo-Po3.08-04 [56]: Design of a novel inductive type fault current limiting
Makoto Kirimura (Osaka university)
- Speaker at Wed-Mo-Po3.04-06 [26]: Fundamental Study on Cancer Therapy by Blocking Newborn Blood Vessels Using a High-Frequency Rotating Magnetic Field
Takanobu Kiss (Kyushu University)
- Speaker at Thu-Af-Or24-03: Novel Characterization Technique to Visualize Local Defects in a REBCO Pancake Coil Winding
- Speaker at Tue-Mo-Po2.10-05 [77]: In-Field Current Transport Properties in Long Length IBAD-PLD REBCO Tapes under the Influence of Local Ic Variation
Seok-Cheol Ko (Kongju National University)
- Speaker at Wed-Mo-Po3.09-08 [70]: Magnetizing Characteristics of Bridge Type SFCL with Simultaneous Quench Using Flux-Coupling
- Speaker at Wed-Mo-Po3.09-09 [71]: Fault Current Limiting Characteristics of a Small-Scale Bridge Type SFCL with Single HTSC Element Using Flux-Coupling
Jung Hyup Ko (Jeju National University)
- Speaker at Tue-Af-Po2.22-01 [75]: Investigation on Electrical and thermal behaviors of 2G HTS Racetrack Coil with Metal-Insulator Transition Insulation Material under External Time-Varying Magnetic Field
Kensuke Kobayashi (National Institute for Materials Science)
- Speaker at Thu-Mo-Po4.09-02 [64]: Development and test results of a superconducting joint resistance evaluation system
Norikiyo Koizumi (QST)
- Speaker at Fri-Mo-Or26-01 [Invited]: Progress of ITER TF coil fabrication in Japan
Charilaos Kokkinos (FEAC Engineering P.C.)
- Speaker at Mon-Mo-Po1.04-03 [37]: Engineering Design and Digital Twin of the Nb3Sn 16T main dipole magnet of the FCC accelerator
Dylan Kolb-Bond (NHMFL-FSU)
- Speaker at Mon-Af-Po1.11-05 [5]: Stress analysis of the 32 T superconducting magnet at the MagLab including screening current effects
Masataka Komiya (Kyushu University)
- Speaker at Wed-Mo-Po3.06-05 [41]: Design and Numerical Analysis of 10 MW-class Fully-Superconducting Synchronous Generators Installing the New Casing Structure for Turboelectric Propulsion System
Mochimitsu Komori (Kyushu Institute of Technology)
- Speaker at Mon-Mo-Po1.10-04 [112]: Dynamic Characteristics in The Horizontal Direction for New Type SMB Using SC Bulk and SC Coil
- Speaker at Thu-Mo-Po4.14-01 [108]: Proposal of Magnetically Levitated Mover Using High Tc SC Coils
Hyungsik Kong
- Speaker at Wed-Mo-Po3.12-06 [101]: A Study on Robust Design of Irreversible Demagnetization of IPMSM Rotor Core Using Dy-Free Permanent Magnet
- Speaker at Mon-Mo-Po1.07-09 [84]: Design of SMC core in Axial-Flux Motor with 3D Printing
Ershuai Kong (IHEP)
- Speaker at Wed-Af-Po3.15-04 [8]: Design study and preliminary test results of a high field ReBCO coil with a new end structure
Jaap Kosse (University of Twente)
- Speaker at Thu-Af-Or21-01: A Superconducting Demonstrator Magnet for Magnetic Density Separation
Chris Kovacs (The Ohio State University)
- Speaker at Tue-Mo-Po2.10-04 [76]: Direct Measurement of Modified Interconductor Contact Resistance Values in Coated Conductor Stacks and Roebel Cables
- Speaker at Wed-Af-Po3.24-01 [95]: A cable-scale experiment to predict training characteristics of superconducting magnets and explore new magnet materials
Tobias Kulenkampff (CERN)
- Speaker at Tue-Mo-Po2.03-04 [11]: Conductor development and Cold mass design for an ultra-thin 2T, 4m bore, 6m long detector solenoid for the FCC-ee IDEA detector
Mithlesh Kumar (PSI - Paul Scherrer Institut)
- Speaker at Wed-Mo-Po3.01-07 [7]: Design and analysis of DEMO PF coils
Soun Pil Kwon (NFRI)
- Speaker at Wed-Mo-Po3.02-03 [13]: An Alternative Conductor Design for the K-DEMO Toroidal Field Coils
Friedrich Lackner (CERN)
- Speaker at Mon-Mo-Po1.03-05 [26]: Geometrical Inspection and Analysis of the Impregnated Nb3Sn 11 T Coils
- Speaker at Thu-Mo-Or16-02: Assembly of MQXFBP1 prototype, the Nb3Sn Q2 quadrupole for HL-LHC
Mayraluna Lao (Karlsruhe Institute of Technology)
- Speaker at Tue-Mo-Po2.10-07 [79]: High-field electrical transport properties of THEVA GdBa2Cu3O7 coated conductors
Thanh Dung Le (École de technologie supérieure)
- Speaker at Mon-Af-Po1.15-08 [40]: Critical Temperature Prediction for a Superconductor: A Bayesian Neural Network Approach
Dinh-Vuong Le (Changwon National University)
- Speaker at Wed-Af-Or15-03: Conceptual design of an HTS motor for future electric propulsion aircrafts
Dongsu Lee (University of Illinois at Urbana-Champaign)
- Speaker at Tue-Af-Po2.20-01 [54]: An Optimal Design to Prevent Demagnetization of Dy-free Magnet for a Traction Motor
Hoon Ki Lee (ChungNam National Unversity)
- Speaker at Tue-Mo-Po2.11-04 [91]: Experimental Verification and Analytical Study of Influence of Rotor Eccentricity on Electromagnetic Characteristics of Permanent Magnet Motor
Wooseung Lee (PSFC-MIT)
- Speaker at Wed-Mo-Po3.11-02 [89]: Quench Analysis of an LTS Quadrupole Triplet Magnet System for the IBS RAON Inflight-Fragment Separator
Jeong-In Lee (CHUNGNAM NATIONAL UNIVERSITY)
- Speaker at Mon-Mo-Po1.09-06 [102]: Design and Analysis of Coaxial Magnetic Gears Considering the Electromagnetic Performance and Mechanical Stress
- Speaker at Wed-Mo-Po3.05-02 [29]: Experiments and Design Criteria for a High-Speed Permanent Magnet Synchronous Generator with Magnetic Bearing Considering Mechanical Aspects
HyunJung Lee (National Fusion Research Institute)
- Speaker at Mon-Af-Po1.18-03 [60]: Effect of flow unbalance on the operational performance of the KSTAR PF1UL magnet with the parallel cooling channel
Hyeong-Jin Lee (Soongsil University)
- Speaker at Wed-Mo-Po3.08-11 [61]: Analysis on Operation Characteristics of Double Quench Flux Lock Type Superconducting Fault Current Limiter
onyou lee (Korea National University of Transportation)
- Speaker at Mon-Af-Po1.14-05 [31]: A Study on Improving the Electrical Stability of a High Voltage Superconducting Magnet
Seung Ryul Lee (KERI)
- Speaker at Tue-Af-Po2.25-02 [113]: Feasibility study for the application of 154 kV smart HTS cables to a power system
Peter Lee (Florida State University)
- Speaker at Wed-Af-Or14-03: Three-fold improvement in layer critical current density in Nb₃Sn wires by using Hf addition
Kyu-Seok Lee
- Speaker at Wed-Mo-Po3.05-07 [34]: Detent Force and Static Thrust Experimental Analysis of a 3kW Single-Phase Linear Permanent Magnet Generator for Striling Engines
Sang Heon Lee (Sunmoon University)
- Speaker at Mon-Mo-Po1.09-03 [99]: Improvement of magnetic levitation force of YBCO superconductor
Jiho Lee (Massachusetts Institute of Technology)
- Speaker at Wed-Af-Po3.15-03 [7]: Quench Analysis of HTS quadrupole magnets for the IF Separator of IBS RISP Demonstrating Electromagnetic Quench Propagation
Dongkyu Lee (Chung Ang University)
- Speaker at Mon-Af-Po1.22-09 [106]: Active Magnetic Equivalent Circuit Analysis Method Considering Magnetic Saturation for Delta Typed Interior Permanent Magnet Traction Motor
KIDOEK LEE (Korea Electronics Technology Institute)
- Speaker at Mon-Mo-Po1.06-04 [66]: A Study on a New Structure Ferrite Magnet Motor with Improved Output Density and Mechanical Stability
SUNG GU LEE (Busan University of Foreign Studies)
- Speaker at Mon-Af-Po1.21-11 [98]: A Study on the Improvement of the Correction Coefficient Considering the 3D Effect of Spoke Type Permanent Magnet Synchronous Motor
- Speaker at Mon-Mo-Po1.07-08 [83]: Study on the Design Process of the Spoke Type Permanent Magnet Synchronous Motor Considering Magnetization Performance
- Speaker at Mon-Mo-Po1.07-09 [84]: Design of SMC core in Axial-Flux Motor with 3D Printing
- Speaker at Wed-Mo-Po3.12-06 [101]: A Study on Robust Design of Irreversible Demagnetization of IPMSM Rotor Core Using Dy-Free Permanent Magnet
seungheon lee
- Speaker at Mon-Mo-Po1.06-12 [74]: Design of Coreless PM motor using with non-magnetic tooth-slot structures using 3D printing technology
- Speaker at Wed-Mo-Po3.13-03 [111]: Ferrite PM Optimization of SPM BLDC Motor for Oil-Pump Applications According to Magnetization Direction
- Speaker at Mon-Af-Po1.21-04 [91]: A study on Improvement of Power Density and Efficiency of Permanent Magnet BLDC motor
- Speaker at Mon-Af-Po1.21-13 [100]: Design of New Novel Shape Rotor by Inductance Changes for Power Improvement and Extended Operating Range
- Speaker at Mon-Mo-Po1.07-02 [77]: Study on Inter-turn Fault Diagnosis of the Six-Phase Interior Permanent Magnet Synchronous Motor Using d-Axis Current
- Speaker at Tue-Af-Po2.21-08 [71]: Considering axial phenomenon, axial permanent magnet segment motor Analysis.
- Speaker at Tue-Mo-Po2.12-01 [99]: Efficiency Improvement of Permanent Magnet BLDC with Halbach Magnet Array for Drone
- Speaker at Tue-Mo-Po2.12-03 [101]: Design and Analysis of a BLDC Motor with Halbach array magnets
Seyeon Lee (Korea Polytechnic University)
- Speaker at Tue-Af-Po2.16-08 [22]: Characteristics of a Stationary Flux Pump using Linear Moving Magnetic Fields for an HTS Jointless Coil in Persistent Current Mode
Jaehwan Lee (Changwon National University)
- Speaker at Thu-Mo-Po4.06-03 [41]: Thermal and mechanical design of 10 MW class HTS wind power generator
Myeonghee Lee (KoreaPolytechnicUniversity)
- Speaker at Thu-Mo-Po4.08-03 [55]: Characteristics Analysis of Fully HTS Synchronous Generators with Dual Field Windings
JONGHUN LEE (KEIMYUNG UNIVERSITY)
- Speaker at Tue-Af-Po2.21-11 [74]: Optimization Design of Segmented Permanent-Magnet Shape by Analysis of Thermal Characteristics
- Speaker at Tue-Mo-Po2.12-07 [105]: Optimized Design of Permanent Magnet Considering Thermal Demagnetization Analysis of Synchronous Motor
Jae-Kwang Lee (hanyang university)
- Speaker at Mon-Mo-Po1.06-09 [71]: A study on IE5 class synchronous reluctance motor design using Co-analysis
- Speaker at Wed-Mo-Po3.13-04 [112]: A Study on Design of Hybrid Type Electromagnet for Maglev
Chan-Kyeong Lee (Supercoil Co., Ltd. )
- Speaker at Thu-Af-Or21-03: Practical Design and Performance Analysis Results of the First MgB2 Magnets for Superconducting Induction Heater in Korea
Chang-young Lee (Korea Railroad Research Institute)
- Speaker at Mon-Af-Po1.22-02 [102]: Design and Evaluation of Prototype High-Tc Superconducting Linear Synchronous Motor for High-speed Transportation
SUJEONG LEE
- Speaker at Thu-Mo-Po4.14-02 [109]: Research on Electromagnetic Feasibility of Non-contact Eddy Current Brake System for Ultra-high-speed Maglev Trains
Jung Tae Lee (Seoul National University)
- Speaker at Mon-Af-Po1.18-04 [61]: AC Loss Analysis on the KSTAR PF1L Coil Based on Long-Term Operation Data
Hanno Leibrock (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Speaker at Tue-Mo-Po2.08-02 [55]: Radiation resistant magnets for the Super-FRS of the FAIR project
Sarai Lekchaum (Iwate University)
- Speaker at Tue-Af-Po2.24-08 [107]: The Modeling and Numerical Simulation for Spherical Vector-Potential Coil
Z.Y. Li
- Speaker at Mon-Af-Po1.12-05 [12]: AC loss evaluation of a novel 2G HTS narrow-stacked wires with 1 mm width
- Speaker at Mon-Mo-Po1.01-09 [8]: Experimental Study on the Electrical Properties of Optical Fiber Encapsulated High Temperature Superconducting Tapes
Yang Li (Kyoto University)
- Speaker at Thu-Mo-Po4.07-08 [53]: Coupling time constants measurements of spirally-wound striated coated conductors
- Speaker at Tue-Af-Po2.19-12 [51]: Reduction of ac loss in HTS coils of superferric magnets for rapid cycling synchrotrons by changing iron yoke geometry
Xiaofen Li (Shanghai Jiao Tong University)
- Speaker at Thu-Mo-Po4.13-07 [102]: Numerical study and optimization for a prototype EDS maglev system
Wenrong Li (Shanghai Jiao Tong University)
- Speaker at Mon-Af-Po1.23-05 [114]: Performance Evaluation of Conductor on Round Core Cables Used in Superconducting Fault Current Limiting Transformer
- Speaker at Tue-Mo-Po2.09-07 [69]: Study on Mechanical properties of Superconducting conductor on Round Core at 77K
Zheng Li (co author)
- Speaker at Wed-Mo-Po3.09-06 [68]: Technical and Economic Analysis of Resistive Superconducting Current Fault Limiter with Parallel Shunt Resistance
Yongjian Li (Hebei University of Technology)
- Speaker at Mon-Af-Po1.15-03 [36]: Magnetic Properties Measurement and Analysis of High Frequency Core Material Considering Temperature Effect
- Speaker at Thu-Mo-Po4.03-10 [21]: Design and Analysis of a Novel Two-Dimensional High Frequency Magnetic Tester for Nanocrystalline Alloy Material
- Speaker at Tue-Af-Po2.23-04 [91]: Research on the Squeeze Current Effect of the Foil-type Excitation Windings under the Condition of High Frequency
- Speaker at Wed-Af-Po3.22-02 [80]: Effect of Specimen Shape on Eddy Current Distribution in Large Single Sheet Tester
Zheng Li
- Speaker at Wed-Mo-Po3.09-04 [66]: The application of hybrid-type DC SFCL in shipboard MVDC system
jiawei li (Huazhong University of Science and Technology, Wuhan, 430074, China)
- Speaker at Mon-Af-Po1.14-02 [28]: Transient Voltage Analysis of Air-Core Coils with Large Section
Guocheng Li (Wuhan University)
- Speaker at Wed-Mo-Po3.09-11 [73]: Application Study of a Flux-Coupling-Type SFCL for Low-Voltage Ride-Through Operation of a Virtual Synchronous Generator
Tong Li (Institute of Plasma Physics Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.02-01 [7]: Design and Implementation of Interlock System for CFETR CSMC Testing Platform based on FMEA
Chao Li
- Speaker at Mon-Af-Po1.11-07 [7]: Design and experimental results of a Bi2223 superconducting magnet cooling by a free-piston Stirling cryocooler
- Speaker at Wed-Mo-Po3.02-07 [16]: Electro-Magnetic Design of a 3T superconducting Dipole magnet
Huiqi Li (North China Electric Power University)
- Speaker at Mon-Af-Po1.23-01 [110]: Temperature Change Effects on No-Load Loss Characteristics of Amorphous Alloy Cores
Bin Li (Key Laboratory of Smart Grid of Ministry of Education School of Electrical & Information Engineering)
- Speaker at Wed-Mo-Po3.08-02 [54]: Modelling and experimental verification of dc inductive superconducting fault current limiter
Dake Li
- Speaker at Tue-Mo-Po2.02-01 [3]: Design of a 70T Quasi-Continuous High Magnetic Field System with a Dual-Coil Magnet
Gang Li (Southwest Jiaotong University)
- Speaker at Wed-Af-Po3.22-03 [81]: Vibration Control of Vertical Motion for a Superconducting EDS Train
Xianhao Li (HuaZhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.10-02 [70]: Comparison Analysis of Three Different Structures of Current Leads for the Superconducting Energy Pipeline
Xiaodong Li (Beihang University)
- Speaker at Wed-Af-Po3.19-01 [47]: The impact of stacked angle on the uniformity of trapped field in HTS taped stacks
Chengshan Li (Northwest Institute for Nonferrous Metal Research)
- Speaker at Thu-Mo-Po4.05-01 [31]: New precursor powders fabrication technique for Bi-2223 high temperature superconducting tapes
Ming Li (China Institute of Atomic Energy)
- Speaker at Mon-Mo-Po1.03-14 [33]: A High Precision Magnetic Field Shimming algorithm for Inclined 45° Continuous Cutting on Spiral Pole of SC Cyclotron
- Speaker at Mon-Mo-Po1.03-16 [35]: Preliminary Study of the High Temperature Superconducting Solution for 2GeV CW FFAG Magnet
chao li (University of Cambridge)
- Speaker at Wed-Mo-Or12-01: Investigation on the Ultra-high field Flux Pumped superconducting magnets
chuan li
- Speaker at Mon-Af-Po1.14-02 [28]: Transient Voltage Analysis of Air-Core Coils with Large Section
- Speaker at Mon-Af-Po1.16-06 [49]: Working principle analysis and Parameter optimization of snubber circuit applied in 100kA quench protection system
Zhenming Li
- Speaker at Tue-Mo-Po2.05-03 [26]: Performance Analysis and Testing of High Temperature Superconducting Magnet Impregnated with Composite Resin
Ming Liang (Northwest Insititute for Non-ferrous Metal Research)
- Speaker at Wed-Af-Po3.14-04 [3]: High strength and conductivity CuAg micro-composites by accumulative drawing and bundling process
Siyuan Liang (co author)
- Speaker at Wed-Mo-Po3.09-06 [68]: Technical and Economic Analysis of Resistive Superconducting Current Fault Limiter with Parallel Shunt Resistance
yu liang (IMP,CAS)
- Speaker at Wed-Af-Po3.20-03 [56]: Design and Test of a Canted-Cosine-Theta Superconducting Quadrupole Prototype For CiADS Project
Meng Liao
- Speaker at Thu-Mo-Po4.12-02 [89]: Multi-objective filter designing for HTS SMES considering the voltage distribution characteristic
Oliver Liebfried (French-German Research Institute of Saint-Louis)
- Speaker at Wed-Af-Po3.23-07 [92]: Modular Toroidal Copper Coil for the Investigation of Inductive Pulsed Power Generators in the MJ-Range
Sung-Hun Lim (Soongsil University)
- Speaker at Mon-Af-Po1.23-10 [119]: Current Limiting Characteristics of Three-Phase Transformer Type Superconducting Fault Current Limiter According to Secondary Winding Methods
- Speaker at Thu-Mo-Po4.11-01 [74]: Analysis on Protection Coordination of Over-Current Relay Using SFCL’s Impedance Compensation for Protection of a Power Distribution System
- Speaker at Thu-Mo-Po4.11-06 [79]: Current Limiting and Interrupting Characteristics of Flux-Lock Type SFCL with Mechanical Switch
- Speaker at Thu-Mo-Po4.11-11 [84]: Improvement of Current Limiting and Interrupting Operation of Hybrid DC Circuit Breaker using Double Quench
Jung-youl Lim (Korea Railroad Research Institute)
- Speaker at Wed-Mo-Po3.13-09 [117]: Design Optimization of 2G High-Tc Superconducting Magnet for High Speed Transportation
Yinjie Lin (HUST: Huazhong University of Science and Technology)
- Speaker at Wed-Mo-Po3.04-04 [24]: Multiple redundant fuzzy-PID control technology for the scanning magnets of proton therapy nozzle
Alec Lindman (Johannes Gutenberg Universität Mainz)
- Speaker at Tue-Af-Po2.23-09 [96]: A 10+ m$^3$ Ioffe Trap for Project 8
Xiaogang Liu (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.05-06 [59]: Optimization design and mechanical analysis of the CFETR TF coil
Kang Liu (Southwest Jiaotong University)
- Speaker at Wed-Mo-Po3.12-03 [98]: Experimental characterization of a no-insolation HTS racetrack coil in travelling magnetic fields
Chang Liu
- Speaker at Mon-Af-Po1.15-11 [42]: The design of transcranial magnetic stimulation thin core coil based on multi-objective optimization
ZHIHONG LIU
- Speaker at Tue-Mo-Po2.08-05 [58]: The Design and Manufacture of the 90 Degree bending Magnets for Proton Beam Therapy
Huajun Liu (Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.05-04 [34]: Critical Current under Axial Strain of High-Pressure HT Bi-2212 Round Wire
- Speaker at Thu-Mo-Po4.05-05 [35]: Tensile mechanical properties of silver alloy sheathed Bi-2212 wires
- Speaker at Wed-Af-Po3.24-05 [99]: Manufacture and performance test of High Temperature Superconducting Coils for 3.5T Magnetic Separation
- Speaker at Wed-Af-Po3.25-12 [115]: Electro-mechanical properties of multifilamentary Ba0.6K0.4Fe2As2 tapes
chengcheng liu (Hebei University of Technology)
- Speaker at Tue-Af-Po2.25-03 [114]: Sensitivity Analysis of Parameters in Transverse Flux Induction Heating Model
Dong Liu (Hohai University)
- Speaker at Thu-Mo-Po4.06-02 [40]: Performance of multi-layer fractional-slot concentrated windings for superconducting wind turbine generators in normal and short circuit operation conditions
- Speaker at Thu-Mo-Po4.08-09 [61]: Investigation of multi-phase armature windings in HTS wind turbine generators
chengcheng liu (Hebei University of Technology)
- Speaker at Mon-Af-Po1.22-03 [103]: Development of a New Axial Flux Machine with the Ability of Mechanical Flux Weakening
- Speaker at Mon-Af-Po1.22-07 [105]: A Novel Flux Reversal Claw Pole Machine with Soft Magnetic Composite Cores
- Speaker at Mon-Af-Po1.23-04 [113]: A New Residual Flux Measurement Method in the Power Transformer
- Speaker at Mon-Mo-Po1.06-05 [67]: Design and Analysis of a New Synchronous Reluctance Machine with the Aid of Grain Oriented Silicon Steel Cores
- Speaker at Thu-Mo-Po4.07-01 [46]: Core Loss Characteristics and Model Verification of Nanocrystalline Alloys Under Complex Working Conditions
- Speaker at Tue-Af-Po2.20-11 [63]: A Novel Flux Switching Claw Pole Machine with Soft Magnetic Composite Cores
- Speaker at Tue-Mo-Po2.11-10 [96]: Cogging Force Reduction of Tubular Flux Switching Permanent Magnet Motor by Using Unsymmetrical Design Method
Xuyang Liu (IHEP)
- Speaker at Wed-Af-Po3.24-06 [100]: Design and Test a ReBCO Conduction-Cooled Solenoid Magnet without Insulation
- Speaker at Wed-Af-Po3.15-13 [17]: Preliminary research on Soldered Stack ReBCO Cable
Quanyue Liu
- Speaker at Mon-Af-Po1.13-06 [26]:A Novel and Fast Method for Inductance and Force Calculation of Multi-Coaxial Coils for NMR Magnet Design
Fang Liu (the Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.05-04 [34]: Critical Current under Axial Strain of High-Pressure HT Bi-2212 Round Wire
- Speaker at Thu-Mo-Po4.05-05 [35]: Tensile mechanical properties of silver alloy sheathed Bi-2212 wires
- Speaker at Wed-Af-Po3.25-12 [115]: Electro-mechanical properties of multifilamentary Ba0.6K0.4Fe2As2 tapes
Ziqiu Liu (North China Electric Power University)
- Speaker at Tue-Mo-Po2.09-10 [72]: Investigation for Thermal Stability of Quasi-isotropic Superconducting Strand Stacked by 2mm Wide REBCO Tapes With Different Sheaths
Xu Liu (Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.03-06 [17]: Design and optimization of the PCB search coils for the accelerator magnet measurements
Yang Liu (Lanzhou University)
- Speaker at Thu-Af-Or19-08: Experimental research of contact mechanical behavior among YBCO tapes in HTS cable
Yanchao Liu (Beijing Jiaotong University)
- Speaker at Tue-Af-Po2.19-11 [50]: Self-field AC loss measurement of a four-tape HTS stack using Fiber Bragg Grating sensors
Alexandre Mehdi Louzguiti (CERN)
- Speaker at Tue-Af-Po2.18-05 [37]: Design of radiation hard spare units for the orbit corrector dipoles of LHC
yanqing lu (NCEPU)
- Speaker at Wed-Af-Po3.22-05 [83]: Trapped Field Charateristics of A HTS Magnet with Two Holes Using Four Magnetization Methods
- Speaker at Mon-Af-Po1.20-03 [76]: Improvement on Temporal Stability of HTS No-insulation Coil by Enhancing Transverse Resistivity
Jun Lu (National High Magnetic Field Laboratory)
- Speaker at Fri-Mo-Or27-03: Control of contact resistance of a long length REBCO conductor
- Speaker at Wed-Af-Po3.23-09 [94]: Non-destructive testing of high strength conductors for high field pulsed magnets
zhen luo (southwest jiao tong university)
- Speaker at Mon-Mo-Po1.08-06 [92]: A solid nitrogen cooling system for HTS magnets
Xijie Luo
- Speaker at Tue-Mo-Po2.10-03 [75]: Relevance of current density in copper stabilizer for quench protection of coated conductors
- Speaker at Wed-Mo-Po3.11-03 [90]: A fast turnaround experimental platform for testing quench initiation and detection of REBCO coated conductors for high-field magnet applications
Shuwen Ma (North China Electric Power University)
- Speaker at Wed-Af-Po3.19-07 [52]: Study on Mechanical Properties of Quasi-identical Superconductor Strands Stacked by 2mm Wide REBCO Tapes
Yuanyuan Ma (University of Science and Technology of China)
- Speaker at Wed-Af-Po3.24-07 [101]: Electrical insulation testing for CFETR CS model coil
Zhicai Ma (Lanzhou University)
- Speaker at Mon-Af-Po1.18-09 [66]: A pressure drop model for helium flow in Cable-in-Conduit conductors based on porous media analogy
Guangtong Ma (Southwest Jiaotong University)
- Speaker at Mon-Af-Po1.15-04 [37]: Numerical Analysis of a fully HTS Magnetic Bearing Under High-speed Operation
- Speaker at Thu-Mo-Po4.13-06 [101]: 3-D Analysis of High-Tc Superconductor for Magnetic levitation under High-Speed Movement
Yanwei Ma (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Wed-Af-Or14-07: Recent advances in iron-based superconducting wires for high-field applications
Guangtong Ma (Southwest jiaotong University)
- Speaker at Mon-Mo-Po1.10-06 [114]: Design, fabrication and testing of a 15-m long YBCO magnet-based linear synchronous motor for EDS train
Guanghui Ma (Institute of Plasma Physics Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.04-01 [24]: Design and Manufacture of a prototype Nb3Sn-NbTi full-size joint sample for the CFETR Central Solenoid Model Coil
Jun Ma (Cambridge Universitry)
- Speaker at Mon-Af-Po1.19-05 [71]: Study of stator design for rotating type HTS Flux pump
- Speaker at Wed-Af-Po3.22-06 [84]: Numerical study of the performance of HTS switch under perpendicular magnetic field
Arnaud Madur (CEA Saclay)
- Speaker at Tue-Af-Po2.17-07 [31]: Mock-up developments for the superferric dipoles of the Super-FRS of FAIR
Michal Majka (Lublin University of Technology)
- Speaker at Wed-Mo-Po3.09-03 [65]: Design and Test of 6 kV / 140 A Conduction Cooled Flux Coupling Type Superconducting Fault Current Limiter
- Speaker at Wed-Mo-Po3.09-12 [74]: Numerical Analysis of the 6 kV / 140 A Conduction Cooled Flux Coupling Type Superconducting Fault Current Limiter.
Milan Majoros (The Ohio State University)
- Speaker at Tue-Mo-Po2.06-05 [36]: FEM modelling of superconducting whole body, actively shielded 7 T MRI segmented coil magnets wound using Nb3Sn strands
- Speaker at Tue-Mo-Po2.13-04 [111]: FEM modeling of stability and current sharing in Nb3Sn Rutherford cables
- Speaker at Wed-Mo-Po3.07-08 [49]: Modelling of Field and Field Quality in a YBCO Coated- Conductor Wound Planar Undulator
Franco Julio Mangiarotti (CERN)
- Speaker at Thu-Af-Or22-02: Test of the first full-length prototype of the HL-LHC D2 orbit corrector based on Canted Cosine Theta technology
- Speaker at Wed-Mo-PL4-02: Superconducting Magnet Testing: The Art of Giving Feedback on Magnet Design
Pierre Manil (Université Paris-Saclay (FR))
- Speaker at Wed-Af-Po3.17-07 [35]: High definition 3D finite element analysis of low temperature Rutherford cable
Marco Marchetto (TRIUMF)
- Speaker at Wed-Mo-Or10-05: TRIUMF new high resolution mass separator magnet design
Maxim Marchevsky (Lawrence Berkeley National Laboratory)
- Speaker at Fri-Mo-Or25-07: Analysis of the transient mechanics behind superconducting accelerator magnet training
- Speaker at Thu-Af-Or24-01: Diagnostics and control of superconducting magnets using diffuse field ultrasound
Vittorio Marinozzi (FNAL)
- Speaker at Mon-Mo-Po1.03-07 [27]: Analysis of the heater-to-coil insulation in MQXF coils.
Samuele Mariotto (University of Milan - INFN Milan)
- Speaker at Tue-Af-Po2.18-06 [38]: Fabrication and results of the first Round Coil Superferric Magnet at LASA
William Marshall (National High Magnetic Field Laboratory)
- Speaker at Wed-Af-Po3.24-09 [103]: Composite Mechanical Properties of Coils Made With Nickel-Alloy Laminated Bi-2223 Conductors
Douglas Martins Araujo (CERN)
- Speaker at Thu-Mo-Po4.02-03 [9]: Preliminary Design of HEPdipo, a Nb3Sn Large Aperture Dipole Magnet for Cable and Insert Coil testing
- Speaker at Wed-Af-Or13-05: Integration for testing HTS Feather M2 in the FRESCA2 magnet
Vasily Marusov (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Speaker at Mon-Mo-Po1.02-08 [20]: Accurate calculation of field expansion coefficients in FEM magnetostatic simulations
Ratu Mataira (Robinson Research Institute, Victoria University of Wellington)
- Speaker at Mon-Af-Po1.19-04 [70]: Modelling and measurements of stator vs magnet width effects in high-Tc superconducting dynamos.
- Speaker at Tue-Af-Po2.16-02 [17]: Practical Estimation of Superconducting Dynamo Losses
Shinnosuke Matsunaga (SOKENDAI (The Graduate University for Advanced Studies))
- Speaker at Wed-Mo-Po3.02-04 [14]: Development of high-current density HTS STARS conductor for the next generation helical fusion device
- Speaker at Wed-Mo-Po3.02-05 [15]: HTS-WISE conductor and magnet impregnated with low-melting point metal
Peter McIntyre (Texas A&M University)
- Speaker at Mon-Af-Or6-01 [Invited]: SuperCIC: enhancing winding current density for high-field windings of tokamaks
- Speaker at Mon-Mo-Po1.04-10 [42]: Design of an 18 T arc dipole for an LHC energy doubler
Rainer Meinke (AML Superconductivity and Magnetics)
- Speaker at Mon-Af-Po1.13-02 [22]: Reaching Field Uniformity of One Part Per Billion and Below
- Speaker at Thu-Mo-Or18-03: Dual Superconducting Halbach Array Generator for large Direct Drive Wind Turbines
- Speaker at Thu-Mo-Po4.12-07 [94]: Research Magnets with High-Field Uniformity
Yiran Meng (North China Electric Power University)
- Speaker at Tue-Mo-Po2.09-05 [67]: Numerical Study on AC Loss of Quasi-isotropic Superconducting Strand in AC Magnetic Fields at Low Temperature
Matthias Mentink (CERN)
- Speaker at Mon-Af-Po1.16-04 [47]: Protection Studies of the HL-LHC circuits with the STEAM Simulation Framework
- Speaker at Thu-Af-Or20-05: Quench simulations versus experimental observations on the HL-LHC MCBRD canted-cosine-theta short models and prototype magnets
Xu Miaofu (Institute of High Energy Physics(IHEP))
- Speaker at Mon-Mo-Po1.08-04 [90]: Development of Cryostats for Superconducting Magnets at IHEP
James Michel (Los Alamos National Laboratory)
- Speaker at Wed-Af-Po3.23-03 [88]: Design, Construction and Operation of New Duplex Magnet at Pulsed Field Facility-NHMFL
ZONG MING (Shenyang University of technology)
- Speaker at Tue-Af-Po2.23-10 [97]: Study on a Novel Electromagnetic Tripping System with Two Staeg Short Circuit Tripping Characteristic
Lu Minghang (Nanjing University of Aeronautics and Astronautics)
- Speaker at Tue-Mo-Po2.11-11 [97]: Investigation of High Temperature Superconducting Flux-Switching Motors with Different Secondary Structures
Stephen MINTER (Cryomagnetics, Inc.)
- Speaker at Mon-Mo-Or2-05: 25T High Field Bi-2212 Magnet Development
Roger Mitchell (Cryogenic Ltd)
- Speaker at Mon-Mo-Po1.08-10 [96]: Nab Spectrometer Magnet System
- Speaker at Tue-Mo-Po2.01-01 [1]: A large scale cryogen-free magnet for neutron decay research
Shun Miura (Kyushu University)
- Speaker at Thu-Mo-Po4.08-07 [59]: Electromagnetic design of tens MW-class fully-superconducting wind power generators with high-performance REBa2Cu3Oy wires
Hiroshi Miyazaki (Toshiba Energy Systems & Solutions Corporation)
- Speaker at Tue-Af-Po2.22-07 [80]: Quench test of a stacked REBCO coil composed of six single pancakes with electrically conductive epoxy resin
Michele Modena (CERN)
- Speaker at Wed-Mo-Or10-02: Performance of the Optimized Mechanical Design of the CLIC Main Beam Quadrupole Magnet Prototype
Taro Morita (Sophia University)
- Speaker at Wed-Af-Po3.21-05 [71]: Fabrication of new internal tin Nb3Sn wire using Sn-Zn alloy as Sn core
Marco Morrone (CERN)
- Speaker at Wed-Af-Po3.17-08 [36]: Mechanical behaviour of the HL-LHC beam screen during a quench test campaign of the MQXF short model magnet
Carsten Muehle (GSI Helmholtzzentrum fuer Schwerionenforschung)
- Speaker at Wed-Af-Po3.20-09 [61]: A flexible search coil set-up for magnetic measurements of accelerator dipole magnets
- Speaker at Tue-Mo-Po2.04-05 [19]: Optimization of a Solenoid for an Electron Lens in SIS18
Hans Guenter Mueller
- Speaker at Tue-Af-Po2.17-05 [29]: Preliminary Test Results of the First of Series Multiplet for the Super-FRS at FAIR
Tim Mulder (CERN / Twente Technical University (NL))
- Speaker at Mon-Af-Or6-02: Manufacturing and Test of Next Generation 100 kA @ 10 T and 4.5 K ReBCO-CORC Cable-In-Conduit Conductors for Large-Scale Magnets
- Speaker at Mon-Mo-Or2-01: Technology for Compact CORC Multi-Layer Solenoid and Racetrack Coils
jeongmin mun (changwon national university)
- Speaker at Mon-Af-Po1.20-05 [78]: Thermal and electric characteristics of no insulation REBCO coil with conduction plates and epoxy impregnation
Haruyuki Murakami (Quantum radiology Science and Technology)
- Speaker at Mon-Mo-Po1.05-09 [62]: Mechanical Compress Process for Pre-compression of JT-60SA Central Solenoid
Joseph F Muratore (Brookhaven National Laboratory)
- Speaker at Thu-Mo-Or16-03: Test Results of the First Two Full-Length Prototype Quadrupole Magnets for the LHC Hi-Lumi Upgrade
Masamichi Murayama (Tokyo Institute of Technology)
- Speaker at Tue-Mo-Po2.02-05 [7]: Design and Implementation of DC Pulsed Power Supply Employing Self-excited Induction Generators and Flywheels for Toroidal Field Coils of a tokamak device, Plato
Marco Musardo (Brookhaven National Laboratory)
- Speaker at Wed-Af-Po3.16-10 [27]: Magnetic Field Optimization of an In-Vacuum Undulator at NSLS-II
Riccardo Musenich (INFN e Universita Genova (IT))
- Speaker at Thu-Af-Or21-02: A Superconducting Space Magnet for Antimatter Spectrometer
Shogo Muto (Fujikura Ltd.)
- Speaker at Tue-Mo-Po2.05-07 [30]: Micromechanical properties evaluation of BaHfO$_3$-doped EuBCO coated conductors using a microcantilever beam method
Luigi Muzzi (ENEA)
- Speaker at Mon-Af-Po1.14-06 [32]: A clean production line for conductors insulation preparation
- Speaker at Wed-Mo-Po3.01-05 [5]: Magnetostructural calculations and design study of the DTT central solenoid
- Speaker at Wed-Mo-Po3.10-03 [77]: Nb3Sn Wind & React conductors and joints for the low field grades of a layer wound DEMO TF coil
Cory Myers (Ohio State University)
- Speaker at Thu-Mo-Po4.07-05 [50]: Field Quality Measurements of High-Temperature Superconducting Canted Cosine Theta Accelerator Magnets
Yoh Nagasaki (Tohoku University)
- Speaker at Tue-Mo-Po2.07-04 [44]: Suitable Excitation Method of REBCO MRI Magnet for Suppressing Screening Field Attenuation
Tomoyuki Naito (Iwate University)
- Speaker at Wed-Af-Po3.25-01 [105]: Effects of carbon doping on trapped magnetic field of MgB$_{2}$ bulk prepared by in-situ hot isostatic pressing method
Mio Nakamoto
- Speaker at Fri-Mo-Or26-01 [Invited]: Progress of ITER TF coil fabrication in Japan
Dong-Woo Nam
- Speaker at Mon-Mo-Po1.07-09 [84]: Design of SMC core in Axial-Flux Motor with 3D Printing
- Speaker at Wed-Mo-Po3.12-06 [101]: A Study on Robust Design of Irreversible Demagnetization of IPMSM Rotor Core Using Dy-Free Permanent Magnet
Gi-Dong Nam (Changwon National University)
- Speaker at Tue-Af-Po2.16-03 [18]: Design and performance analysis of a dynamo-type HTS flux pump for a 10 kW superconducting generator
Kyohei Natsume (Quantum radiology Science and Technology)
- Speaker at Wed-Mo-Po3.03-01 [17]: Design of JT-60SA Cryodistribution components
Martina Neri (ASG superconductors)
- Speaker at Tue-Mo-Po2.07-08 [48]: Development and construction of an actively shielded zero boil-off 7T/700 bore magnet.
Martina Neri (ASG Superconductor s.p.a.)
- Speaker at Tue-Mo-Po2.03-10 [15]: Design and Manufacturing Assessment of a Multi-purpose Detector for NICA Collider
Antony Newborough (CERN)
- Speaker at Tue-Mo-Po2.08-04 [57]: The upgrade of the CERN Proton Synchrotron Booster transfer line magnets
Doan Nguyen (LANL)
- Speaker at Mon-Af-Or4-04: Finite Element Method (FEM) Simulations for Pulsed Magnet Design Using COMSOL Multiphysics
- Speaker at Wed-Af-Po3.23-03 [88]: Design, Construction and Operation of New Duplex Magnet at Pulsed Field Facility-NHMFL
Yang Nie (North China Electric Power University)
- Speaker at Wed-Af-Po3.19-08 [53]: Effect of Combination Twisting with Bending Characteristics on Critical Current of Quasi-Isotropic HTS Strand
Feipeng Ning (IHEP)
- Speaker at Wed-Af-Po3.15-13 [17]: Preliminary research on Soldered Stack ReBCO Cable
- Speaker at Wed-Af-Po3.24-06 [100]: Design and Test a ReBCO Conduction-Cooled Solenoid Magnet without Insulation
- Speaker at Mon-Mo-Po1.08-02 [89]: The Cryogenic Thermosiphon for the CEPC Solenoid
- Speaker at Thu-Mo-Po4.10-03 [71]: Thermal Design and Test of 4kA Current Lead based on Stacked YBCO Conductor
Mathias Noe (Karlsruhe Institute of Technology)
- Speaker at Advantages and Challenges in High-field Rotating Machinery
Jerzy Nogiec (Fermilab)
- Speaker at Thu-Mo-Po4.03-04 [15]: The Application of Coordination to Magnetic Measurement Automation: An SSW System Example
So Noguchi (Hokkaido University)
- Speaker at Thu-Mo-Po4.03-09 [20]: Characteristic Resistance Measurement of No-Insulation REBCO Pancake Coil under Different Conditions
Hyun Sung Noh (Korea University)
- Speaker at Tue-Af-Po2.22-04 [78]: Study on Cooling and Over-current Characteristics of a Superconducting Magnet Using a Grooved Bobbin
Shinichi Nomura (Meiji University)
- Speaker at Thu-Mo-Po4.12-01 [88]: Mobile Superconducting Magnetic Energy Storage for On-site Estimations of the Electric Power System Stability
- Speaker at Wed-Af-Po3.24-03 [97]: Design and Development of a High-Frequency Magnet Prototype for Magnetic Hyperthermia Applications
Tetsuhiro Obana (NIFS)
- Speaker at Wed-Af-Po3.18-05 [41]: Current distribution of an HTS twisted stacked-tape cable conductor investigated by self-field measurements
- Speaker at Wed-Mo-Po3.04-05 [25]: Lightweight design of superconducting magnets for a rotating gantry with active shielding
- Speaker at Thu-Mo-Po4.04-03 [26]: Dependence of joint resistance on current for ITER-TF joint samples
Jun Ogawa (Niigata University)
- Speaker at Tue-Af-Po2.19-02 [43]: Experimental investigation on AC loss characteristics under HTS cable electromagnetic conditions
Sang-Soo Oh (Korea Electrotechnology Research Institute)
- Speaker at Wed-Af-Po3.18-04 [40]: Electromagnetic properties of REBCO coated conductor with multi-superconducting layers
Dong-Hun Oh (Hanyang University)
- Speaker at Thu-Mo-Po4.03-07 [18]: A Novel Diagnosis Method through Pulse Sequence Analysis of DC Void Partial Discharge in High Temperature Superconducting Cable
Young-Seok Oh (Korea Institute of Materials Science)
- Speaker at Wed-Af-Po3.25-03 [107]: Numerical simulation of drawing process of multi-filamentary MgB2 wire
Sangjun Oh (NFRI)
- Speaker at Tue-Af-Po2.19-07 [48]: A Theoretical Investigation on the AC Loss Estimation Method for Fusion Magnet
Tetsuo Oka (Niigata University)
- Speaker at Wed-Mo-Po3.07-01 [43]: Magnetizing Technique for Permanent Magnets in IPM Motor Rotors Using HTS Bulk Magnet
Masaya Okuno (Kyoto University)
- Speaker at Mon-Af-Po1.22-12 [109]: Analytical and Experimental Study of Multiphysics on Starting of a 50 kW Class Fully HTS Induction/Synchronous Motor and Its Variable Speed Controllability
Mattia Ortino (TU Wien)
- Speaker at Wed-Af-Or14-05: Evolution of Nano-particles Doping in Nb3Sn Wires
Kozo Osamura (Research Institute for Applied Sciences)
- Speaker at Wed-Af-Po3.25-13 [116]: Mechanical Property of Composite MgB2 Superconducting Wires
Maxim Osipov (NRNU MEPhI)
- Speaker at Thu-Mo-Po4.13-09 [104]: Levitation and guidance force for the system of coated conductor stacks and permanent magnets in a wide temperature range.
- Speaker at Wed-Mo-Po3.07-06 [48]: Magnetization of HTSC tape in flux pump regime
Alexander Otto (Solid Material Solutions, LLC)
- Speaker at Thu-Af-Or19-07: Low cost transposed cables for coil windings made with Type NX 1G and ReBCO 2G HTS tapes
- Speaker at Tue-Mo-Or8-01: Low cost transposed cables for coil windings made with REBCO 2G HTS tapes
- Speaker at Wed-Af-Or15-04: Low loss HTS stator coils for high power density superconducting motors
Lianhua Ouyang (Shanghai Institute of Applied Physics, CAS)
- Speaker at Tue-Mo-Po2.08-06 [59]: Design and Test of an Octupole Scanning Magnet for Proton Therapy
Koichiro Ozaki (Kyushu University)
- Speaker at Tue-Mo-Po2.12-06 [104]: Conceptual design and electromagnetic analysis of superconducting induction motors using REBa2Cu3Oy tapes
Evandro Paese (Departamento de Engenharia Mecânica, Universidade de Caxias Sul, Campus Universitário da Região dos Vinhedos)
- Speaker at Mon-Mo-Po1.02-01 [13]: Parametric Sensitivity Characteristics of Numerical Simulations on EMF Free Bulging of Circular Sheet Metal
- Speaker at Tue-Af-Po2.23-06 [93]: Experimental Analysis of the Interference-Fit Joining of Aluminium Tubes by Electromagnetic Forming
Helder Filipe Pais Da Silva (CERN)
- Speaker at Wed-Af-Po3.17-03 [31]: Mechanical design and analysis of the BabyIAXO magnet cold mass, cryostat and support system
Yunhao Pan (Shanghai Jiao Tong University)
- Speaker at Thu-Mo-Po4.13-11 [106]: A new design and exciting for HTS superconducting magnet of Maglev
wanjiang pan (Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.04-06 [29]: Research and Development of the Heater Chains for the ITER Current Lead Terminals
Heng Pan (LBNL)
- Speaker at Mon-Mo-Po1.03-02 [23]: Fracture Failure Analysis for MQXFA Magnet Aluminum Shell
Victor Pantsyrny (Bochvqr Institute)
- Speaker at Wed-Af-Po3.14-01 [1]: The Study of Strengthening and the Electrical Resistivity of Deformation Processed Cu/Cu-16%Nb and Cu/Cu-7%Nb Microcomposites
- Speaker at Wed-Af-Po3.21-07 [73]: Superconducting Properties of Internal Tin Nb3Sn Strands, doped with Ti, Zr and Ti, Ti and Ta.
Michael Parizh (GE Global Research)
- Speaker at Mon-Mo-Po1.01-08 [7]: Quench Protection of Multi-coil Low Temperature Superconducting Systems
- Speaker at Thu-Mo-Po4.03-03 [14]: Current Reset in Superconducting Devices
- Speaker at Ultra-high Field Superconducting Magnets for MRI
- Speaker at Wed-Mo-Po3.12-12 [107] [Invited]: Superconducting Synchronous Motors for Electric Ship Propulsion
Eui-Jong Park (Chosun University)
- Speaker at Mon-Mo-Po1.09-08 [104]: Structure and Electromagnetic Characteristics according to Pole Piece Supporter Material of Magnetic Gear
- Speaker at Mon-Mo-Po1.10-05 [113]: Characteristics Comparison of Magnetic Gears According to Permanent Magnet Material
Jeonghwan Park (Seoul National University)
- Speaker at Thu-Af-Or23-08: A Design Study on No-Insulation HTS Isochronous Cyclotron Magnet for Carbon Ion Therapy
- Speaker at Tue-Mo-Po2.05-04 [27]: An Analytic Study on Electromechanical Conditions for Compressive Electromagnetic Stress in an HTS Magnet
SANGYONG PARK (KOREA)
- Speaker at Thu-Mo-Po4.11-09 [82]: Operating characteristics of arc-induction type DC circuit breaker with permanent magnets
Dongkeun Park (Massachusetts Institute of Technology)
- Speaker at Mon-Af-Po1.11-10 [10]: Screen-Current Overstressing of REBCO Coil: An Experimental and Analytical Study with Small REBCO Coils
- Speaker at Thu-Af-Or23-01: Construction and Test Results of a Cryogen-Free 23.5-T REBCO Magnet Prototype towards a Tabletop 1-GHz Microcoil NMR Magnet
- Speaker at Tue-Mo-Or9-05: A Tabletop, Liquid Helium-Free, Persistent-Mode 1.5-T MgB2 “Finger” MRI Magnet: Test of a Half-Scale MRI-Quality Magnet
- Speaker at Tue-Mo-Po2.07-01 [41]: Design of a Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/90-mm MgB2 “Finger” MRI Magnet for Osteoporosis Screening
Kyu-Hoon Park (Hanyang University)
- Speaker at Thu-Mo-Po4.11-05 [78]: Optimal Designing and Performance Evaluation of Inductive Superconducting Fault Current Limiter Combined with Low-Voltage Mechanical Circuit Breaker in DC Microgrid System
Quanling Peng (Institute of High Energy Physics, Chinese Academy of Sciences, )
- Speaker at Wed-Af-Po3.20-01 [54]: CCT Type Twin aperture Superconducting Quadrupole Design for CEPC Interaction Region
Tao Peng (Wuhan National High Magnetic Field Center)
- Speaker at Mon-Mo-Po1.06-06 [68]: A Saddle-shaped Post-assembly Magnetizing Coil for a 300 kW 2-pole High-speed Permanent Magnet Rotor
- Speaker at Tue-Mo-Po2.04-09 [23]: Optimization of the compression coil configuration in magnetic trap type magnetic compression device
Xuan Peng (Hyper Tech Research Inc.)
- Speaker at Wed-Af-Po3.21-02 [68]: Refining the grain size and improving critical current in tube type Nb3Sn conductor in Hyper Tech
Ana Perez (Demaco Holland BV)
- Speaker at Wed-Af-Or15-06: Rotor Cooling Concept for the ASuMED Superconductive Motor
chhon pes (CEA)
- Speaker at Mon-Mo-Po1.04-02 [36]: 3D mechanical Analysis of the Block-coil Dipole option for the future Circular Collider
Carlo Petrone (CERN)
- Speaker at Wed-Af-Po3.20-06 [59]: A Transducer for Measuring the Field Quality in Superconducting Solenoids
- Speaker at Wed-Mo-Or10-01: Power test and magnetic measurement of the first short models of twin aperture magnets for FCC-ee
Valery Petrykin (SuperOx-Japan LLC)
- Speaker at Thu-Af-Or19-02: New product line of SuperOx 2G HTS tapes customized for application in specific ranges of magnetic fields and temperatures
Wei Pi (North China Electric Power University)
- Speaker at Wed-Af-Po3.18-10 [46]: Insulation Design for 10kV Three-phase Concentric High-Temperature Superconducting Cable
Zbigniew Piec (General Atomics)
- Speaker at Thu-Mo-Po4.04-05 [28]: Demountable Coaxial Clamped Joint For ITER Central Solenoid Module Final Test Program
Federica Pierro (Tufts University)
- Speaker at Tue-Mo-Po2.10-01 [73]: Structural Modelling of HTS Cable-in-Conduit Conductor with Helically Slotted Aluminum Core for High-Field Magnet Applications
- Speaker at Wed-Mo-PL4-04: Electro-mechanical Characterization of HTS Tapes and Conductors for the next Generation High-field Magnets
Alfredo Portone (Fusion For Energy/European Commission)
- Speaker at Mon-Af-Po1.17-03 [55]: Comparison of FEM Predicted and Measured values of the TF coil closure welding distortion
Weiling Pu (jiangsu univeristy school of electrical and information engineering)
- Speaker at Mon-Af-Po1.21-05 [92]: Design and Analysis of a Multi-Flux-Modulated Permanent Magnet Motor
DongSheng Pu (State Key Laboratory of Advanced Electromagnetic Engineering an)
- Speaker at Wed-Mo-Po3.11-09 [95]: Experimental study on the quench characteristic of YBCO tapes with different arranggements
Pierre Pugnat (LNCMI-EMFL-CNRS, UGA)
- Speaker at Thu-Mo-Or17-06: From Manufacture to Assembly of the 43 T Grenoble Hybrid Magnet
Hyunjo Pyo (Gachon University)
- Speaker at Mon-Mo-Po1.07-09 [84]: Design of SMC core in Axial-Flux Motor with 3D Printing
- Speaker at Wed-Mo-Po3.12-06 [101]: A Study on Robust Design of Irreversible Demagnetization of IPMSM Rotor Core Using Dy-Free Permanent Magnet
Xin Qi
- Speaker at Tue-Af-Po2.23-12 [99]: Frequency measurement of Terahertz wave by using high magnetic field technology
chengjin qian ( Huazhong University of Science and Technology, Wuhan, 430074, China)
- Speaker at Mon-Af-Po1.14-02 [28]: Transient Voltage Analysis of Air-Core Coils with Large Section
Hanyang Qin (North China University of Technology)
- Speaker at Wed-Mo-Po3.08-05 [57]: Simulation and experimental investigation on the critical current and AC losses of a hybrid superconducting fault current limiter with bias magnetic field during normal operation
Jinggang Qin
- Speaker at Mon-Af-Or6-05: The design and R&D work of high performanceCICCs for CFETR TF
- Speaker at Thu-Mo-Po4.05-04 [34]: Critical Current under Axial Strain of High-Pressure HT Bi-2212 Round Wire
- Speaker at Thu-Mo-Po4.05-05 [35]: Tensile mechanical properties of silver alloy sheathed Bi-2212 wires
- Speaker at Wed-Af-Po3.25-12 [115]: Electro-mechanical properties of multifilamentary Ba0.6K0.4Fe2As2 tapes
- Speaker at Thu-Mo-Po4.05-03 [33]: Mechanical and Electrical Testing of A Novel Enhanced Bi2212 Round Wire
- Speaker at Wed-Mo-Po3.10-01 [75]: Study of superconducting strands damage and mechanical characteristics by different shape of CICC conductors
Li Qiu
- Speaker at Tue-Af-Po2.19-03 [44]: Research on Driving Coil with Coupling Cooling Method in Electromagnetic Forming
Qingquan Qiu (Institute of Electrical Engineering, Chinese Academy of Science)
- Speaker at Thu-Af-Or21-06: Design and Test of 40 kV / 2 kA DC Superconducting Fault Current Limiter
Ronghai Qu (Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.08-04 [56]: Electromagnetic Design of HTS DC Generator with Iron-cored Stator and Rotor
Timing QU (State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University, Beijing 10084, China.)
- Speaker at Thu-Mo-Or18-07: Design and testing of a gas-helium cooled REBCO magnet prototype for a 10-Mvar HTS synchronous condenser
Huu Luong Quach (Jeju National University)
- Speaker at Mon-Af-Po1.15-08 [40]: Critical Temperature Prediction for a Superconductor: A Bayesian Neural Network Approach
- Speaker at Wed-Mo-Po3.11-08 [94]: Investigation on Quench and Normal Zone Propagation Characteristics of 2G HTS Racetrack Coil with Metal-Insulator Transition Insulation Material
Lionel Quettier
- Speaker at Tue-Mo-Or9-01 [Invited]: Commissioning completion of the Iseult Whole Body 11.7 T magnet
Alexey Radovinsky (MIT)
- Speaker at Tue-Mo-Po2.03-07 [13]: loffe Trap Magnet for Project 8 Experiment
Renuka Rajput-Ghoshal (Jlab)
- Speaker at Thu-Af-Or22-07: Optimization of an Interaction Region Quadrupole Magnet for Future Electron-Ion Collider at Jefferson Lab
Emmanuele Ravaioli (CERN)
- Speaker at Thu-Af-Or20-04: Quench protection of the 16 T Nb3Sn ERMC and RMM magnets
- Speaker at Thu-Af-Or24-02: Magnet diagnostic utilizing stray capacitance monitoring on a 2 m long CCT coil
Luigi Reccia (Fusion for Energy)
- Speaker at Mon-Af-Po1.17-06 [57]: ITER Pre Compression Ring Test Facility FEM analysis
Li Ren (Huazhong University of Science and Technology)
- Speaker at Wed-Af-Po3.18-08 [44]: Experimental research on critical current behavior of various HTS tapes
- Speaker at Wed-Mo-Po3.08-09 [59]: AC Loss Analysis of a 10-kV / 500-A Flux-coupling type Superconducting Fault Current Limiter
- Speaker at Wed-Mo-Po3.08-10 [60]: Balanced current distribution in high coupling coils of flux-coupling-type superconducting fault current limiter
- Speaker at Wed-Mo-Po3.09-05 [67]: Voltage Distribution Research on Flux-Coupling-Type SFCL
Yong Ren (Hefei Institutes of Physical Science, Chinese Academy of Scienc)
- Speaker at Mon-Mo-Po1.05-04 [57]: The application of TSTC based on ReBCO tapes in CFETR CS magnet design
Jaime Renedo Anglada (CERN)
- Speaker at Tue-Mo-Po2.08-03 [56]: The New Magnet System for the East Area at CERN
Rebecca Riccioli (CEA)
- Speaker at Mon-Af-Po1.18-01 [58]: Advanced mechanical modeling of cyclically loaded cable-in-conduit conductors for fusion magnets
JongSuk Ro (Chungang University)
- Speaker at Mon-Af-Po1.22-09 [106]: Active Magnetic Equivalent Circuit Analysis Method Considering Magnetic Saturation for Delta Typed Interior Permanent Magnet Traction Motor
Etienne Rochepault (Université Paris-Saclay (FR))
- Speaker at Tue-Mo-Or7-03: 3D Design of F2D2, the FCC Block-coil Short Model Dipole
- Speaker at Tue-Mo-Po2.13-11 [117]: Dimensional Changes of Nb3Sn Conductors During Heat Treatment Using Digital Image Correlation
- Speaker at Wed-Af-Po3.20-14 [66]: Magnet end shaping of the Future Circular Collider Main Quadrupole: optimization and validation
Dimitrios Rodopoulos (FEAC Engineering P.C. & University of Patras)
- Speaker at Mon-Af-Po1.15-01 [34]: PITHIA: An innovative BEM/FEM simulation software for field calculations of accelerator magnets
Gherardo Romanelli (Tratos )
- Speaker at Wed-Mo-Po3.01-02 [2]: Structural analyses of the Toroidal Field magnet system of the DTT
Peter Rottländer (GSI Darmstadt)
- Speaker at Tue-Mo-Po2.04-02 [17]: Optimising a Magnetic Septum with Heating Jacket
Liu Rujing (China)
- Speaker at Tue-Af-Po2.19-08 [49]: Effect of Dynamic Resistance on AC loss in a Conductor-on-round-core Cable
GianLuca Sabbi (LBNL)
- Speaker at Thu-Mo-Po4.07-03 [48]: Magnetic Measurements of MQXFA Prototype Quadrupoles during Magnet Assembly
Tiina Salmi (Tampere University of Technology, Finland)
- Speaker at Thu-Mo-Or16-05: A Database-Tool for Storage and Analysis of Magnet Parameters and Test Results
Xabier Sarasola (EPFL)
- Speaker at Wed-Mo-Po3.01-10 [10]: Progress in the Design of a Hybrid HTS-Nb3Sn-NbTi Central Solenoid for the EU DEMO
Kenichi Sasaki (KEK)
- Speaker at Wed-Af-Po3.22-07 [85]: Development of fine shimming technique with magnetorheological fluid
Thierry Schild (Iter)
- Speaker at Fri-Mo-Or26-04: Preparation of the ITER Central Solenoid Assembly
- Speaker at Tue-Mo-Or9-01 [Invited]: Commissioning completion of the Iseult Whole Body 11.7 T magnet
Hans Schneider-Muntau (CS&T)
- Speaker at Mon-Af-Or4-01: Conceptual Design Optimization of a 60 T Hybrid Magnet
Fabian Schreiner (E02)
- Speaker at Thu-Mo-Or18-02: Development of non-insulated racetrack coils wound with second generation high temperature superconductor tapes for a stator system for wind generators
Wolfgang Schreyer (TRIUMF)
- Speaker at Mon-Af-Or5-06: Design and first tests of a unique, superconducting multipole magnet for the ultracold-neutron trap PENeLOPE
Kamil Sedlak (EPFL Lausanne)
- Speaker at Mon-Af-Or6-04: AC Loss Measurements of the DEMO TF React&Wind Conductor Prototype no. 2
- Speaker at Mon-Mo-Or1-05: Updates on the conceptual design of the European DEMO superconducting magnet system
Bernd Seeber (University of Geneva)
- Speaker at Wed-Af-Or14-02: Reduced strain/stress sensitivity of the critical current of Nb3Sn conductors
Bernd Seeber (University of Geneva - DAP, Geneva, Switzerland, now scMetrology SARL, Geneva, Switzerland)
- Speaker at TMC - A Low-cost High Field Conductor
Venkat Selvamanickam (University of Houston)
- Speaker at Thu-Af-Or19-04: Recent Advances in REBCO Tapes and Round Wires for High Magnetic Field Applications
Geonhang Seo (Changwon National University)
- Speaker at Tue-Af-Po2.22-06 [79]: Investigation on the correlation between electric and thermal contact resistance of REBCO HTS wires
Sung-Won Seo (Chungnam National University)
- Speaker at Mon-Mo-Po1.09-09 [105]: Electromagnetic Analysis of Linear Magnetic Gears according to the Characteristics of their Flux-Modulation Poles
- Speaker at Wed-Mo-Po3.05-04 [31]: Experimental Verification and Analytical Prediction for Generating Characteristics of Double-Sided Permanent Magnet Linear Synchronous Generator for Ocean Wave Energy Converter
Stefano Sgobba (CERN)
- Speaker at Wed-Af-Po3.14-05 [4]: Examination and Assessment of Large Forged Structural Components for the Precompression Structure of the ITER Central Solenoid
Tengming Shen (Lawrence Berkeley National Lab)
- Speaker at Fri-Mo-Or25-06: Epoxy and quench training of Nb3Sn accelerator magnets
Shifeng Shen (Naval University of Engineering)
- Speaker at Wed-Mo-Po3.13-11 [119]: Design of a High temperature superconducting linear synchronous motor for pulse power application
Jie Sheng (Shanghai Jiao Tong University)
- Speaker at Mon-Mo-Po1.10-11 [119]: Demagnetization performance of Superconducting Permanent Magnets under Vibration in Electrodynamic-suspension Levitation System
Yi Shi (ASIPP)
- Speaker at Tue-Mo-Po2.06-02 [33]: Magnetic and Finning Force behavior on Nb3Sn Strands Subjected to Transverse Deformation for 14 T MRI Superconducting Magnet
Seong Yeub Shim (GSI)
- Speaker at Tue-Af-Po2.18-08 [39]: Analysis of Interdependent multipole field pattern and complement dipole field quality
Hyung-Seop Shin (Andong National University)
- Speaker at Tue-Mo-Po2.10-10 [82]: Electromechanical Performance of Practical REBCO CC tapes for Superconducting Wind Power Applications
- Speaker at Wed-Af-Po3.24-08 [102]: Reliability evaluation procedure of REBCO coated conductor tapes based on mechanical and electro-mechanical properties obtained by uniaxial tension and cyclic tests at 77 K
Kyung-Hun Shin (Chungnam National University)
- Speaker at Wed-Mo-Po3.05-03 [30]: Design and Analysis of High-Speed Permanent Magnet Synchronous Generator Considering Rotor Structure
Hyo-Seob Shin (Chungnam National University)
- Speaker at Mon-Af-Po1.21-07 [94]: Experimental Verification and Semi-3D Analysis Techniques of BLDC Motor with Permanent Magnet Overhang and Housing-Integrated Rotor Core
Yuko Shiroyanagi (Argonne National Laboratory)
- Speaker at Wed-Mo-Or12-06: Conceptual design of a conduction cooled superconducting undulator
Damien Simon (Université Paris-Saclay (FR))
- Speaker at Thu-Af-Or22-04: Assembly and Test of MQYYM: a 90 mm NbTi quadrupole magnet option for HL-LHC
Chen Siyuan (Wuhan National High Field Center, Huazhong University of Scienc)
- Speaker at Wed-Af-Po3.23-05 [90]: The Axial Displacement and Its’ Effects on the Mechanical Behavior of Pulsed High-field Magnets
Anis SMARA (University of Cambridge)
- Speaker at Mon-Af-Po1.22-06 [104]: Influence of architecture of composite superconducting tape-based stacks on AC demagnetization for electric machines application
Chukman So (TRIUMF (CA))
- Speaker at Mon-Af-Or5-03: The ALPHA-g apparatus - A precision magnet system for antimatter gravity measurement
YONGDAE SO
- Speaker at Mon-Af-Po1.21-01 [88]: Optimization design of Stator Notch Shape of Brushless DC Motor by Response of Surface Method
Jooyeong So (Korea Polytechnic University)
- Speaker at Thu-Mo-Po4.11-07 [80]: HTS Fault Current Limiting Module to Reduce Burden of a DC Circuit Breaker for 30 kV MDVC Power Grid
Yusuke Sogabe (K)
- Speaker at Thu-Mo-Po4.07-04 [49]: A simplified electromagnetic modelling of accelerator magnets wound with Conductor on Round Core wires for ac loss calculations
- Speaker at Wed-Af-Or13-06: Comparison between measurements and calculations of shielding-current-induced field in a small dipole magnet wound with coated conductors
- Speaker at Wed-Mo-PL4-01: Mitigation of Shielding-current-induced Field in a Magnet Wound with Coated Conductors for Accelerator Systems
Vyacheslav Solovyov (Brookhaven Technology Group)
- Speaker at Thu-Af-Or24-05: 25 K performance of conduction-cooled solenoids wound from exfoliated filament YBCO cables
Honghai Song (Brookhaven National Laboratory)
- Speaker at Mon-Af-Po1.20-09 [82]: Millisecond Dynamic Effects During Sudden Discharge and Cycling Characteristics of an HTS Stainless-Steel-Insulated Double Pancake Coil
- Speaker at Mon-Mo-Or3-04: Cable Quench Simulations and Current Sharing in REBCO Conductors Wound on Round Cores (CORC) for High Field Accelerator Magnet
- Speaker at Wed-Af-Po3.15-14 [18]: New Application of Superconducting MgB2 Tubes for Passive Magnetic Field Shielding for Electron Ion Collider
- Speaker at Wed-Af-Po3.20-07 [60]: Vertical Magnetic Field Measurements of Full-Length Prototype MQXFAP Quadrupoles at Cryogenic Temperatures for Hi-Lumi LHC
Zhiquan Song (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031, China)
- Speaker at Mon-Af-Po1.16-06 [49]: Working principle analysis and Parameter optimization of snubber circuit applied in 100kA quench protection system
Jungbin Song (LNCMI-CNRS)
- Speaker at Mon-Af-Po1.20-01 [74]: Thermal, Electrical and Mechanical Behaviors of Metal-as-Insulation HTS Coils Wound with Commercial REBCO Tapes under High Background Magnetic Fields at 4.2 K
Shogo Sonoda (Sophia university)
- Speaker at Mon-Mo-Po1.05-08 [61]: Effects of Resonance Phenomenon caused by Power Supply on JT-60SA CS
Brandon Sorbom (Commonwealth Fusion Systems)
- Speaker at Fri-Mo-PL6-01: Commercialization of Superconducting Technologies - CFS, MIT and High-field Fusion
Marco Statera (INFN Milano - LASA)
- Speaker at Fri-Mo-Or25-02: Construction and Cold Test of the Superferric Skew Quadrupole for HL-LHC
- Speaker at Thu-Mo-Po4.07-02 [47]: Transverse field measurements in a bulk superconducting Magnetic Shell for a CLAS12 Target at Jefferson Lab
Boris Stepanov (EPFL-SPC)
- Speaker at Wed-Mo-Po3.01-08 [8]: EUROfusion DEMO Tokamak, Inter-Layer Joint for Toroidal Field Coil
James Storey (CERN)
- Speaker at Wed-Af-Or15-08: Superconducting magnetic bearings for a high-speed electric aircraft motor
Daniel Strange (Oxford Instruments)
- Speaker at Tue-Af-Po2.23-01 [88]: Recent State of The Art Magnets for Beamline Applications
Thomas Strauss (FNAL)
- Speaker at Tue-Mo-Or7-02: First field quality measurements of a 15 T Nb3Sn Dipole Demonstrator
Rongyu Su (State Key Laboratory of Advanced Electromagnetic Engineering and Technology)
- Speaker at Wed-Mo-Po3.08-10 [60]: Balanced current distribution in high coupling coils of flux-coupling-type superconducting fault current limiter
Yu Suetomi (RIKEN)
- Speaker at Fri-Mo-Or27-02: 30 T generation using an intra-layer no-insulation (LNI) REBCO coil in a 17 T LTS magnet
- Speaker at Tue-Af-Po2.14-07 [7]: Over-current test on an intra-layer no-insulation (LNI) REBCO coil under a high background field
Michinaka Sugano
- Speaker at Thu-Af-Or22-01: Improvement in training performance by enhancing coil end support of the Beam Separation Dipole for the High-Luminosity LHC
Masahiro Sugimoto (Furukawa Electric Co., Ltd.)
- Speaker at Wed-Af-Po3.21-08 [74]: Evaluation of various Nb-rod-method Cu-Nb/Nb3Sn wires designed for practical React-and-Wind coils
Ryota Sugouchi (Kyushu University)
- Speaker at Tue-Mo-Po2.12-05 [103]: Design and Electromagnetic analysis of 2 MW Fully-Superconducting Synchronous Motors Composed of REBa2Cu3Oy coated conductors for Turboelectric Propulsion System
Mike Sumption (The Ohio State University)
- Speaker at Conductor Technology Needs
- Speaker at Thu-Mo-Po4.07-07 [52]: AC Loss of Superconducting Materials- refined loss estimates for very high density motors and generators for hybrid-electric aircraft: MgB2 wires, Coated conductor tapes and wires
- Speaker at Tue-Mo-Or9-04: Magnetic, mechanical and thermal modeling of superconducting, whole-body, actively shielded, 3 T MRI magnets wound using MgB2 strands for liquid cryogen free operation
- Speaker at Wed-Mo-Or11-01 [Invited]: Magnetization, Flux Penetration, and Drift of YBCO Cable Segments Models and Measurements for Accelerator Magnet Applications
Eric Sun (Jefferson Lab, USA)
- Speaker at Tue-Af-Po2.19-05 [46]: Test Results of Quench-back Management Due to Fast Decaying Current Induced AC Losses in SHMS Superconducting Magnet at Jefferson Lab
Songjun Sun (Huazhong University of Science and Technology)
- Speaker at Mon-Af-Po1.21-09 [96]: Design and Optimization of A Novel Axial-Radial Flux Permanent Magnet Machine for Higher Power Density and Lower Cogging Torque
- Speaker at Tue-Af-Po2.20-07 [59]: Comparative Study on A Novel Modular Multistage Axial Flux Permanent Magnet Machine with Different Core Materials
Hae-jin Sung (Chnagwon National University)
- Speaker at Thu-Mo-Po4.08-02 [54]: Performance analysis of a metal-insulation type lab-scale HTS wind power generator
Kento Suzuki
- Speaker at Tue-Af-Po2.18-01 [33]: Magnetic field design of a full-scale prototype of the HL-LHC beam separation dipole with a correction of mechanical deformation
- Speaker at Tue-Af-Po2.18-04 [36]: Design and performance of the quench protection heater for the HL-LHC beam separation dipole
Charles Swenson (L)
- Speaker at Wed-Af-Po3.16-03 [21]: Conceptual Design of a Superbend Magnet for Advance Light Source Upgrade Project
Shunji Takahashi (Sophia University)
- Speaker at Tue-Mo-Or8-04: Hoop stress concentration in an HTS tape coil under external magnetic fields
Teruou Takayama (Yamagata University)
- Speaker at Tue-Af-Po2.24-09 [108]: Numerical Investigations on Enhanced-Performance Superconducting Linear Acceleration System for Pellet Injection
Tomohiro Takayanagi (JAEA/J-PARC)
- Speaker at Wed-Mo-Or10-03: Comparative studies of three-dimensional analysis and measurement for establishing pulse electromagnet design
Makoto Takayasu (MIT)
- Speaker at Thu-Af-Or20-03: Acoustic sensor array for quench detection of CICC superconducting cables
Yasuaki Takeda (The University of Tokyo)
- Speaker at Tue-Mo-Or8-07: Superconducting joints between Bi2223/Ag tapes towards persistent current HTS magnets
Xiangyu Tan (Huazhong university of science and technology)
- Speaker at Wed-Mo-Po3.09-06 [68]: Technical and Economic Analysis of Resistive Superconducting Current Fault Limiter with Parallel Shunt Resistance
Yunfei Tan (Huazhong University of Science and Technology)
- Speaker at Mon-Af-Po1.11-03 [3]: A new way to solve the critical current degradation of YBCO coils by ice
Kazuhiro Tanaka (KEK: High Energy Accelerator Research Organization)
- Speaker at Mon-Af-Po1.14-03 [29]: New types of organic resins for insulation of warm magnets
Hideki Tanaka (Hitachi, Ltd.)
- Speaker at Wed-Af-Po3.25-04 [108]: Performance of MgB2 Superconductor developed for high-efficiency Klystron Applications
Qisheng Tang (Shanghai Advanced Research Institute, Chinese Academy of Sciences)
- Speaker at Wed-Af-Po3.16-04 [22]: The Cooling Design for the Magnetic Structure of the SHINE Superconducting Undulator
Simon Tardieu (Laboratoire National des Champs Magnétiques Intenses, EMFL, CNRS-INSA-UGA-UPS)
- Speaker at Mon-Af-Or4-06: High strength - high conductivity silver nanowire-copper composite wires by spark plasma sintering and wire-drawing for non-destructive pulsed fields
Herman Ten Kate (CERN)
- Speaker at Mo-Mo-PL1-01: SUPER-Conductors for Successful Magnets
- Speaker at Mon-Af-Or5-01: Magnet Designs for the Future Circular Collider ee, eh and hh Detectors
Reed Teyber (Lawrence Berkeley National Laboratory)
- Speaker at Wed-Mo-Or10-04: Combined-function magnetic measurement system
Eckhard Theisen (Babcock Noell)
- Speaker at Mon-Af-Po1.17-02 [54]: Cold Testing of ITER Toroidal Field Winding Packs
Giordano Tomassetti (ENEA)
- Speaker at Mon-Af-Po1.16-01 [44]: Design of a quench detection system by implementing an optimization procedure
Michael Tomsic (Hyper Tech Research)
- Speaker at Wed-Af-Po3.25-02 [106]: Development of MgB2 superconductor wire and coils for AC and DC applications
Jin Tong (SINAP)
- Speaker at Tue-Mo-Po2.04-07 [21]: Design and Optimization of Eddy-Current Type Thin Septum Magnet for Beam Injection of Diffraction Limited Storage Ring
Wei Tong (Institute of Plasma Physics, Chinese Academy of Science; Science Island Branch, University of Science and Technology of China)
- Speaker at Mon-Af-Po1.16-06 [49]: Working principle analysis and Parameter optimization of snubber circuit applied in 100kA quench protection system
Alexandre Torre (CEA)
- Speaker at Thu-Mo-Po4.04-07 [30]: Induced currents and AC losses models for a butt-joint with rutherfords shunts
Jack Toth (National High Magnetic Field Laboratory (NHMFL))
- Speaker at Tue-Af-Po2.15-01 [12]: Conceptual Design for a next generation Resistive Large Bore Magnet at the NHMFL
Zoe Marie Townsend (CERN)
- Speaker at Mon-Mo-Po1.04-08 [41]: Investigations into the preliminary Future Circular collider 16 Tesla dipole cryostat design.
Frederic Trillaud (Universidad Nacional Autónoma de México)
- Speaker at Wed-Af-Po3.16-12 [29]: Magnetic and thermomechanical study of a variable gap superconducting undulator
Christophe Trophime (CNRS)
- Speaker at Wed-Af-Po3.23-06 [91]: Integrating Modeling Toolchain into High Field Magnet Monitoring and Control system.
Simonetta Turtu' (ENEA/ICAS)
- Speaker at Wed-Mo-Po3.01-01 [1]: Conceptual Design and Analysis of the DDT PF Coil System
Andrew Twin (Oxford Instruments)
- Speaker at Thu-Mo-Or17-04: Development of High Field Superconducting Magnets with Increasing Persistence and EXperimental Access
- Speaker at Mon-Mo-Or3-03: Use of Silicon Carbide Varistors For Quench Protection of Superconducting Magnets in Cryogenic Environments
Hiroshi Ueda (Okayama University)
- Speaker at Tue-Mo-Po2.05-08 [31]: Numerical evaluation on electromagnetic force and stress due to screening current in REBCO coil
- Speaker at Wed-Mo-Po3.04-02 [22]: Design and development of small model HTS coil system for Skeleton Cyclotron
ryuichi ueki (KEK)
- Speaker at Wed-Af-Po3.22-01 [79]: Study of magneto-resistance for low magnetic field measurement
UNKNOWN UNKNOWN
- Speaker at Tue-Mo-Or9-01 [Invited]: Commissioning completion of the Iseult Whole Body 11.7 T magnet
Anvar V A (University Of Twente)
- Speaker at Tue-Mo-Po2.10-02 [74]: Electromechanical analysis of simplified CORC® cable configurations: experiments and FE modeling
- Speaker at Wed-Mo-Po3.10-07 [81]: AC loss, contact resistance, and cabling degradation analysis of various Nb3Sn sub-size CICC cable designs
Riccardo Umberto Valente (LASA-INFN (Milano, Italy))
- Speaker at Mon-Mo-Po1.04-04 [38]: Electromagnetic and mechanical study for the Nb3Sn bending dipole short model for FCC
Giorgio Vallone (Lawrence Berkeley National Lab. (US))
- Speaker at Thu-Mo-Or16-06: Prediction of the Reversible Critical Current Degradation in Nb3Sn Superconducting Accelerator Magnets
- Speaker at Mon-Mo-Po1.04-15 [47]: Mechanical analysis and measurements of MQXFS6, the fifth short model of the Nb3Sn Low-β Quadrupole for the Hi-Lumi LHC
Danko van der Laan (Advanced Conductor Technologies)
- Speaker at Thu-Af-Or19-06: Electromechanical Performance of CORC® Cables and Wires under Axial Tension and Transverse Compression
- Speaker at Tue-Mo-Or8-02: Recent progress on CORC® cable and wire development for magnet applications
Vitaly Vysotsky (Russian Scientific R&D Cable Institute)
- Speaker at Wed-Mo-Po3.02-02 [12]: The general appearance of the superconducting magnet system for the Gas-Dynamic Multimirror Trap
- Speaker at Wed-Mo-Po3.10-05 [79]: Cable Compaction as a Possible Factor to Reduce Tcs Degradation of ITER Toroidal Field Conductors
Wolfgang Walter (Babcock Noell GmbH)
- Speaker at Tue-Af-Po2.17-06 [30]: Industrial production of superconducting magnets for the FAIR SIS100 accelerator
Hao Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.09-07 [103]: Design and Analysis of a Special Lateral Suspension Coil for a Spherical Superconducting Rotor
Tao Wang
- Speaker at Mon-Mo-Po1.01-02 [2]: Design and Evaluation of a Controllable Contact Resistance for Meter-Class REBCO No-Insulation Pancake Coils
Xudong Wang (High Energy Accelerator Research Organization)
- Speaker at Wed-Af-Po3.15-05 [9]: Excitation and Magnetic Field Performances of a Prototype REBCO Sextupole Magnet at 4.2 K
Mingyang Wang (Shanghai Jiao Tong University)
- Speaker at Mon-Af-Po1.20-02 [75]: Performance Study on the No-Insulation HTS Coil wound with Narrow-Stacked wire
Pengbo Wang (Huazhong University of Science and Technology,)
- Speaker at Tue-Af-Po2.24-02 [101]: 30 T pulsed magnet designed for an 800 GHz gyrotron
Shuang Wang (Huazhong University of Science and Technology)
- Speaker at Wed-Af-Po3.23-04 [89]: Design and Test of the 64 T with 10ms Flat-Top Magnetic Field System Driven by Capacitor at the Wuhan National High Magnetic Field Center
tengyan wang
- Speaker at Mon-Af-Po1.23-06 [115]: Winding Design and simulation of a 120kVA/6kV single-phase HTS transformer
Kun Wang (Institute of Plasma Physics Chinese Academy of Sciences (ASIPP))
- Speaker at Mon-Mo-Po1.01-13 [12]: Dynamic quench protection framework for nuclear fusion energy devices based on superconducting magnet testing
Wei Wang (Sichuan University)
- Speaker at Tue-Mo-Po2.12-08 [106]: Design, Fabrication, and Testing of a YBCO Racetrack Coil for an HTS Synchronous Motor with Brushless Exciter
- Speaker at Mon-Af-Po1.14-07 [33]: Partial Discharge Characteristics and Endurance Under Repetitive Square Wave Voltage for PI firm Used in Inverter-fed HTS Motors in Liquid Nitrogen
- Speaker at Mon-Mo-Po1.09-02 [98]: Magnetic levitation using stacks of commercial superconducting tapes
- Speaker at Tue-Mo-Po2.07-05 [45]: A No-insulation YBCO Magnet using Multiple Flux Pumps as Sources to Improve Central Magnetic Field
Xingzhe Wang (Lanzhou University)
- Speaker at Thu-Mo-Po4.02-06 [11]: Upgrade of sub-systems and performance improvement for a versatile multi-field test facility of superconducting wires and tapes
- Speaker at Tue-Mo-Or8-05: Effect of thermal mismatch stress and electromagnetic loads on delamination in REBCO coated conductors
Yaohui Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Mon-Af-Po1.13-03 [23]: Ultra-high field NMR superconducting magnet design with conduction-cooled cryostat system
- Speaker at Tue-Mo-Po2.06-04 [35]: Magnet design of a 7 T animal MRI scanner
Haonan Wang
- Speaker at Wed-Mo-Po3.08-03 [55]: A Resistance Model of Fault Current Limiting Magnets under DC Impact
Li Wang (Southwest Jiaotong University)
- Speaker at Thu-Mo-Po4.13-10 [105]: Vertical Dynamic Responses of the HTS Maglev System Under Track Random Irregularity
- Speaker at Thu-Mo-Po4.14-03 [110]: Guidance performance of YBCO bulks below the liquid nitrogen temperature zone
Zhenshang Wang (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Tue-Af-Po2.16-13 [27]: A new control strategy to improve the performance of the voltage source converter of new high power magnet power supply
Yanwei Wang (University of Strathclyde)
- Speaker at Thu-Mo-Po4.07-06 [51]: Maximising the trapped field of HTS ring magnets
Qiuliang Wang
- Speaker at Tue-Af-Po2.14-05 [5]: Electromagnetic and thermal analysis of No-Insulation ReBCO Double Pancake Coils During Charging
- Speaker at Tue-Af-Po2.14-06 [6]: A critical quench simulation model of No-insulation high temperature superconducting coils with defects
- Speaker at Tue-Mo-Po2.06-06 [37]: Analysis of Gradient-Induced Eddy Current in a superconducting MRI Magnet
- Speaker at Tue-Mo-Po2.06-07 [38]: An Optimal Target Field Approach for Passive Shimming In Superconducting MRI
- Speaker at Tue-Mo-Po2.06-08 [39]: Design of the Superconducting Main Coils Based on Variable Density Method in MRI
- Speaker at Tue-Mo-Po2.06-09 [40]: On the Accurate Calculating of Coil-tissue Interactions for Ultra-high Field MRI RF Coils Using a Hybrid MoM/FDTD Algorithm
Qingjian Wang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Speaker at Tue-Af-Po2.21-09 [72]: Study of A Post-Assembly Magnetization Method of a V-Type Rotor of Interior Permanent Magnet Synchronous Motor for Electric Vehicle
- Speaker at Wed-Mo-Po3.05-06 [33]: Research of Post-Assembly Magnetization of Large Surface-Mounted Rare-Earth Permanent Magnet Machines with Integrated Magnetizing Windings combing with Stator Windings
Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.12-06 [93]: Design and Fabrication of the Permanent Magnet Diverter for Deflecting Electrons on Wide-field X-ray Telescope
- Speaker at Tue-Af-Po2.14-09 [9]: Elimination of Screening Current-Induced Magnetic Field in a non-insulation REBCO Superconducting Coil Through A Small Size Radio Frequency Antenna
Xiaorong Wang (Lawrence Berkeley National Laboratory)
- Speaker at Thu-Mo-Po4.07-03 [48]: Magnetic Measurements of MQXFA Prototype Quadrupoles during Magnet Assembly
- Speaker at Wed-Af-Or13-04: Development of REBCO dipole magnets using CORC® wires
Can Wang (Hefei Institutes of Physical Science, Chinese Academy of Scienc)
- Speaker at Tue-Af-Po2.16-11 [25]: Design of a Resistive Magnet Power Supply Based on Three-Level Buck Converters
Yingzhe Wang (IHEP)
- Speaker at Mon-Mo-Po1.04-14 [46]: Mechanical Design, Assembly and Strain Measurement Results of LPF2: a 12-T Hybrid Common-coil Dipole Magnet
Chengtao Wang (Institute of High Energy Physics, University of Chinese Academy of Sciences)
- Speaker at Tue-Mo-Or7-05: Electromagnetic design, fabrication and test of LPF2: a 12-T hybrid common-coil dipole magnet with inserted IBS coil
keyang wang (Lanzhou University)
- Speaker at Wed-Af-Po3.19-03 [49]: The Contact Mechanical Behaviors in Triad CORC Wires
Zihao Wang (Shanghai Jiao Tong University)
- Speaker at Thu-Mo-Po4.13-12 [107]: Investigation of the Levitation Force of High Temperature Superconducting Coils using Wind-and-Flip Method
Yawei Wang (University of Bath)
- Speaker at Fri-Mo-Or27-05: Thermal stability and mechanical characteristics of multiple no-insulation pancake coil system in high field magnets.
- Speaker at Thu-Mo-Po4.12-09 [95]: Development and challenges of a commercial megawatt high temperature superconducting DC induction heater
- Speaker at Wed-Af-Or15-01: Key electromagnetic characteristics of non-insulation REBCO rotor windings in machines of electrical aircraft: eddy loss and ramping delay.
Dongquan Wang (Chinese Academy of Sciences)
- Speaker at Thu-Af-Or23-04: Optimal Design of HTS/LTS Hybrid Magnet for 25T NMR
Qian Wang (Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.08-04 [56]: Electromagnetic Design of HTS DC Generator with Iron-cored Stator and Rotor
- Speaker at Tue-Af-Po2.25-09 [119]: A Novel Magnetic Gear with Unequal Halbach Array and Spoke Permanent Magnets
- Speaker at Tue-Af-Po2.25-10 [120]: A Novel Slotted Magnetic Gear with Spoke and Inset Permanent Magnets
- Speaker at Thu-Mo-Po4.06-04 [42]: Comparison of Electromagnetic Performance of 10-MW HTS Double-Stator Flux Modulation Generators With Different Topologies for Offshore Direct-Drive Wind Turbines
Pengyu Wang (Huazhong University of Science and Technology)
- Speaker at Mon-Af-Po1.14-02 [28]: Transient Voltage Analysis of Air-Core Coils with Large Section
Dayou Wang (Western Superconducting Technologies Co,Ltd.)
- Speaker at Wed-Af-Po3.25-05 [109]: Fabrication of (6+1)-structure superconducting cable based on 30-core MgB2 superconducting wire
Hiroyuki Watanabe (Hitachi Co. Ltd.)
- Speaker at Tue-Af-Po2.23-05 [92]: Development of a Prototype MgB2 Superconducting Solenoid Magnet for High-Efficiency Klystron Applications
Shaoqing Wei (China Three Gorges University)
- Speaker at Wed-Af-Po3.20-04 [57]: The Effects of Manufacturing Errors on Field Quality of a Canted-Cosine-Theta Twin Aperture Beam Orbit Corrector
Liangliang Wei (Kyoto University)
- Speaker at Mon-Af-Po1.22-01 [101]: Comparison of Different Stator Winding Structures on Rotating Performance of Fully High-Temperature Superconducting Induction/Synchronous Motor
- Speaker at Wed-Af-Or15-07: Analytical and Experimental Study on a Low-Speed and High-Efficiency 1 kW Class Fully High-Temperature Superconducting Induction/Synchronous Generator
Hubertus Weijers (NHMFL/FSU)
- Speaker at Thu-Mo-Or17-03: Test and commissioning of the 32 T superconducting magnet
Jeremy Weiss (Advanced Conductor Technologies)
- Speaker at Mon-Mo-Or2-02: High-field magnets wound from CORC® cables and wires
- Speaker at Thu-Mo-Po4.04-02 [25]: Development of CORC® Cable Terminations and Low-loss Joints for use in Magnets for Fusion
Xinghao Wen (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Mon-Af-Po1.18-06 [63]: Quench analysis of the CFETR TF Coil Using the Gandalf Code
yang wenjiang (china)
- Speaker at Mon-Mo-Po1.09-01 [97]: 3D modeling and analysis of superconducting tape stack conductors for uniform trapped field
- Speaker at Tue-Af-Po2.19-08 [49]: Effect of Dynamic Resistance on AC loss in a Conductor-on-round-core Cable
- Speaker at Wed-Af-Po3.19-01 [47]: The impact of stacked angle on the uniformity of trapped field in HTS taped stacks
Frans Wijnen (Radboud University Nijmegen)
- Speaker at Tue-Af-Po2.15-02 [13]: Design of the resistive insert for the Nijmegen 45 T hybrid magnet
- Speaker at Tue-Af-Po2.15-03 [14]: Failure modes of the insert magnet of a hybrid magnet system: consequences for the mechanical design
Gerard Willering (CERN)
- Speaker at Mon-Mo-Or3-01: Methods for performance diagnostics for Nb3Sn accelerator magnets in the CERN superconducting magnet test facility
- Speaker at Mon-Mo-Po1.03-03 [24]: Performance update of 2-m-long 11 T Nb3Sn dipole magnet models for HL-LHC
Jong-Hyeon Woo (chungnam national university)
- Speaker at Wed-Mo-Po3.05-05 [32]: Experimental Verification and No-load Characteristics Analysis of Permanent magnet Linear Oscillating Actuator by using Semi-3D Analysis Technique with Corrected Stacking Factor
Wei Wu (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.03-11 [31]: Test of a single Nb3Sn sextupole coil for ECR ion source using a mirror structure
- Speaker at Tue-Af-Po2.18-10 [41]: Optimization Design of CiADS Superconducting Solenoid
- Speaker at Wed-Af-Po3.17-04 [32]: Mechanical design of the magnet mirror structure for testing Nb3Sn sextupole coil of 45 GHz ECRIS
Wei Wu (Shanghai Jiao Tong University)
- Speaker at Mon-Mo-Po1.10-07 [115]: Design and optimization of closed-loop NI-HTS coils for a prototype EDS-Maglev system
Qihong Wu (Tsinghua University)
- Speaker at Wed-Af-Po3.15-12 [16]: Development of a 3-T conduction cooled MgB2 dipole magnet
- Speaker at Wed-Mo-Po3.06-04 [40]: The structure design of a 300-kvar class HTS synchronous condenser prototype
Beimin Wu
- Speaker at Tue-Mo-Po2.05-02 [25]: Strain characteristic exploration for a 5 T superconducting split magnet system of a multi-field test facility
kaihong wu (Institute of plasma physics, Chinese academy of sciences)
- Speaker at Tue-Mo-Po2.06-03 [34]: An optimal design approach for 14T actively shielded magnetic resonance magnets
Yu WU (ASIPP)
- Speaker at Mon-Mo-Or1-04: Design of CFETR TF Prototype Coil
Fan Wu (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.05-05 [58]: Seismic analysis of the CFETR central solenoid model coil
Bo Wu (Western Superconducting Technologies Co., Ltd)
- Speaker at Wed-Af-Po3.21-10 [76]: Effect of Nb3Sn coarse grains on critical current densities of Internal Tin Nb3Sn strand
Mengyao Wu (Jiangsu University)
- Speaker at Mon-Mo-Po1.09-11 [107]: Parameter Optimization Design of Six-pole AC Hybrid Magnetic Bearings Considering Variable Stiffness
- Speaker at Mon-Af-Po1.21-08 [95]: Analysis and detection of demagnetization fault of Bearingless Permanent Magnet Slice Motor
- Speaker at Mon-Mo-Po1.09-10 [106]: Self-sensing Modeling of Rotor Displacement for Six-pole Hybrid Magnetic Bearing Based on Improved Particle Swarm Optimization Support Vector Machine
- Speaker at Mon-Mo-Po1.09-12 [108]: Decoupling Control Based on Active Disturbance Rejection Control of Six-pole Radial-axial Active Magnetic Bearing
- Speaker at Mon-Mo-Po1.10-01 [109]: Optimal Design and Performance Analysis of Six-pole Hybrid Magnetic Bearing
- Speaker at Tue-Mo-Po2.12-02 [100]: Optimization Design of Permanent Magnet Assisted Single Winding Bearingless Synchronous Reluctance Motor
- Speaker at Wed-Mo-Po3.05-01 [28]: Multiobjective optimal design of bearingless permanent magnet synchronous generator with multiobjective particle swarm optimization algorithm
Chun-Yi Wu (National Synchrotron Radiation Research Center)
- Speaker at Mon-Af-Po1.19-03 [69]: Design and Implementation of SoC Embedded Waveform Acquisition System for Surveillance and Diagnostics of Pulsed Magnets Power Supplies
- Speaker at Wed-Af-Po3.16-01 [19]: Control System for a Cryogenic Permanent Magnet Undulator at Taiwan Photon Source
- Speaker at Wed-Af-Po3.16-02 [20]: Design and Development of a New Control Architecture for Elliptically Polarizing Undulator at Taiwan Photon Source
Anbo Wu (General Electric)
- Speaker at Thu-Mo-Po4.10-04 [72]: Finite Element Analysis and Experimental test of current leads with parallel HTS tapes
zelin wu (Huazhong University of Science and Technology)
- Speaker at Tue-Af-Po2.24-04 [103]: Dynamic analysis of sheet metal forming process by uniform pressure electromagnetic actuator using the finite element method
dong XIA (Chinese Academy of Sciences)
- Speaker at Wed-Mo-Po3.09-07 [69]: Electromagnetic field analysis of resistive superconducting fault current limiters for DC applications
Zhao Xian-Feng (Lanzhou Jiaotong University)
- Speaker at Mon-Mo-Po1.09-04 [100]: Analysis to the forced vibration of a high temperature superconducting system with hysteresis
- Speaker at Mon-Mo-Po1.10-09 [117]: A quadratic approximation method for the limit value of magnetic stiffness in a high temperature superconducting levitation system
Zixuan Xiang
- Speaker at Tue-Af-Po2.20-06 [58]: Research on the cost-effectiveness for a flux-biased flux-modulated permanent magnet motor
- Speaker at Tue-Mo-Po2.11-06 [92]: Research on a High Torque Density Outer Rotor Flux-Modulated Machine with Sandwiched-Permanent-Magnet Topology
Deng Xiangli (Shanghai University of Electric Power)
- Speaker at Wed-Mo-Po3.11-05 [92]: Numerical and Experimental Analysis of Thermal Stability of Superconducting Windings Using a YBCO Core Cable
Houxiu Xiao
- Speaker at Mon-Af-Or4-02: Preliminary Analysis on the Failure of a 100 T pulsed magnet at the WHMFC
houxiu Xiao (Wuhan National High Magnetic Field Center)
- Speaker at Mon-Mo-Po1.06-06 [68]: A Saddle-shaped Post-assembly Magnetizing Coil for a 300 kW 2-pole High-speed Permanent Magnet Rotor
- Speaker at Tue-Mo-Po2.04-09 [23]: Optimization of the compression coil configuration in magnetic trap type magnetic compression device
- Speaker at Wed-Af-Po3.14-02 [2]: Study of the fatigue behavior of unidirectional zylon/epoxy composite used in pulsed magnets
Jianfeng Xie
- Speaker at Tue-Af-Po2.24-01 [100]: The development of three stage electromagnetic forming facility and its timing control system
Hongqin Xie (Sichuan University)
- Speaker at Tue-Af-Po2.20-05 [57]: A New Hybrid Excitation Synchronous Machine with Radial Combination of PM and ALA
Zongtai Xie (IHEP)
- Speaker at Thu-Mo-Po4.10-03 [71]: Thermal Design and Test of 4kA Current Lead based on Stacked YBCO Conductor
Yang Xinsheng (Southwest Jiaotong University)
- Speaker at Thu-Mo-Po4.05-08 [38]: Non-destructive evaluation of the critical current for Bi-2212 cable for fusion application
Ying Xu (Jiangsu University)
- Speaker at Tue-Af-Po2.20-10 [62]: Optimization Design and Performance Analysis of Bearingless Flux Switching Permanent Magnet Motor with Multi-tooth Structure
- Speaker at Mon-Af-Po1.21-08 [95]: Analysis and detection of demagnetization fault of Bearingless Permanent Magnet Slice Motor
- Speaker at Tue-Mo-Po2.12-02 [100]: Optimization Design of Permanent Magnet Assisted Single Winding Bearingless Synchronous Reluctance Motor
- Speaker at Wed-Mo-Po3.05-01 [28]: Multiobjective optimal design of bearingless permanent magnet synchronous generator with multiobjective particle swarm optimization algorithm
Ying Xu (Huazhong University of Science and Technology)
- Speaker at Tue-Mo-Po2.09-08 [70]: Performance Degradation of YBCO Tape with Different Stabilizing Layers under Cyclic Mechanical Stress
- Speaker at Wed-Mo-Po3.09-10 [72]: Study on Coordination of Resistive SFCLs and Hybrid-Type Circuit Breakers to Protect a HVDC System with LCC and VSC Stations
Yun Xu
- Speaker at Tue-Mo-Po2.02-02 [4]: Research on Repeated Pulsed High Magnetic Field Control System Based on Pulsed Generator Power Supply
- Speaker at Tue-Mo-Po2.02-03 [5]: A Design Method for Repetitive Pulse High Magnetic Field System Based on Multi-objective Optimization Algorithm
- Speaker at Tue-Mo-Po2.02-04 [6]: Research on a Combined Power Supply of Battery and Pulsed Generator System for High Pulsed Background Magnetic Field
Lei Xu (Jiangsu University)
- Speaker at Tue-Af-Po2.21-06 [70]: Coupled Magnetic Field analysis and optimization of Double Stator Linear Rotary PM Machine
Aihua Xu (institute of plasma physics Chinese academy of sciences)
- Speaker at Mon-Mo-Po1.05-02 [55]: CFETR Central Solenoid Magnet System Structural Analysis
Qingjin XU (IHEP)
- Speaker at Tue-Mo-Or7-04: High Field Magnet Program for Accelerators in China: Status and Plan for Future
Xiaoyong Xu (Shanghai Jiao Tong University)
- Speaker at Mon-Af-Po1.12-12 [19]: Numerical Study on AC Loss of the HTS Coil with distorted AC Transport Current around Laminated Silicon Steel Sheets
Peng Xue (Tsinghua University)
- Speaker at Tue-Af-Po2.25-01 [112]: Structure Design and Performance Analysis of Superconducting DC Energy Transfer Line
TSUYOSHI YAGAI (Sophia University)
- Speaker at Wed-Af-Po3.25-06 [110]: Experimental and numerical study on crack evolution of Nb barriers causing Ic deterioration in multi-filament MgB2 strands during cabling process for large-scale energy storage coils.
Dmitry Yakovlev, (Budker Institute of Nuclear Physics)
- Speaker at Wed-Mo-Po3.02-02 [12]: The general appearance of the superconducting magnet system for the Gas-Dynamic Multimirror Trap
Kyohei Yamada (Sophia University)
- Speaker at Tue-Mo-Po2.13-08 [115]: Investigation of the Tape Shaped RHQT-Processed Nb3Al Conductors
Kazuhito YAMAGISHI (Yokohama National University)
- Speaker at Mon-Mo-Po1.10-03 [111]: Rotational test of integrated magnetic bearing using multiple HTS cubic bulk units.
Daiki yamamoto
- Speaker at Thu-Mo-Po4.12-05 [92]: Magneto-Archimedes levitation properties for metals by ferromagnetic material arrangement in magnetic fields
Akira Yamamoto (High Energy Accelerator Research Organization (JP))
- Speaker at Tue-Mo-Po2.05-05 [28]: Tensile properties of DyBaCuO low porosity bulk material melt-processed in oxygen atmosphere
Xufeng Yan (Beijing Jiaotong University)
- Speaker at Tue-Af-Po2.25-05 [116]: Effect of the iron core air gap structure of superconducting DC induction heater on the heating of aluminium billet
Sinian Yan (Huazhong University of Science and Technology, China)
- Speaker at Wed-Mo-Po3.08-09 [59]: AC Loss Analysis of a 10-kV / 500-A Flux-coupling type Superconducting Fault Current Limiter
- Speaker at Wed-Mo-Po3.09-06 [68]: Technical and Economic Analysis of Resistive Superconducting Current Fault Limiter with Parallel Shunt Resistance
zhaoying Yan (Southwest Jiaotong University)
- Speaker at Thu-Mo-Po4.13-04 [100]: Dynamic Response Analysis of Superconducting EDS Train Based on Vehicle/Guideway Coupling Dynamics
Yufan Yan (Tsinghua University)
- Speaker at Fri-Mo-Or27-08: Screening current effect on the stress/strain distribution of REBCO high-field magnets: experimental verification and numerical analysis
- Speaker at Wed-Af-Po3.19-05 [50]: Numerical study on the coupling current and magnetization loss of striated CORC cables using 3D T-A formulation
Yoshinori Yanagisawa (RIKEN)
- Speaker at Mon-Af-Po1.13-01 [20 & 21] [Invited]: Towards a 1.3 GHz (30.5 T) NMR: Persistent-mode NMR magnet with superconducting joints between high-temperature superconductors
- Speaker at Thu-Af-Or23-02: Development and charging test of a compact 1 GHz (23.5 T)-class NMR magnet with Bi-2223 inner coils
Chinkang Yang (NSRRC)
- Speaker at Wed-Af-Po3.16-11 [28]: Field measurement of a cryogenic permanent magnet undulator at NSRRC
Tongjun Yang (Institute of Modern Physics, Chinese Academy of Sciences)
- Speaker at Tue-Af-Po2.18-10 [41]: Optimization Design of CiADS Superconducting Solenoid
Wenjiao Yang (Southwest Jiaotong University)
- Speaker at Thu-Mo-Po4.13-01 [97]: Numerical study on dynamic characteristic of HTS Maglev system based on H-formulation with motional electromotive force
Yifeng Yang (University of Southampton (GB))
- Speaker at Mon-Mo-Or2-03: Critical Current and Quench Characteristics of a ReBCO 2G Roebel Cable Pancake Coil at Different Temperatures between 4.2K and 77K in an External Field up to 10T
Wenjie Yang (Institute of modern physics, Chinese academy of sciences)
- Speaker at Tue-Af-Po2.18-02 [34]: Magnetic Field Measurement of first series twin aperture orbit correctors for the HL-LHC Upgrade
Jiabin Yang (University of Cambridge)
- Speaker at Wed-Mo-Po3.11-07 [93]: Analysis of the influence of hot spots on the design of DC resistive SFCLs
Hongmin Yang (Kunsan National University)
- Speaker at Mon-Af-Po1.13-05 [25]: Design Methodology for Ferromagnetic Shimming of HTS NMR Magnets Using a Stacked Multilayer Shim
Ping Yang (Shanghai Maritime University)
- Speaker at Thu-Mo-Po4.12-09 [95]: Development and challenges of a commercial megawatt high temperature superconducting DC induction heater
- Speaker at Tue-Af-Po2.24-11 [110]: Operation parameter and economic effect study of the 1 MW HTS DC induction heater
Chang-Qing Ye (Southwest Jiaotong University)
- Speaker at Mon-Af-Po1.15-04 [37]: Numerical Analysis of a fully HTS Magnetic Bearing Under High-speed Operation
- Speaker at Thu-Mo-Po4.13-06 [101]: 3-D Analysis of High-Tc Superconductor for Magnetic levitation under High-Speed Movement
Haosheng Ye (Shanghai Jiao Tong University)
- Speaker at Wed-Af-Po3.18-02 [39]: Effect of Core Materials on the Electrical Properties of Superconducting Conductor on Round Core Cable
Nijan Yogal (PTB)
- Speaker at Wed-Mo-Po3.12-02 [97]: Measurement of eddy current loss of permanent magnet with higher frequency and temperature effects
Shoichi Yokoyama (Mitsubishi Electric Croporation)
- Speaker at Tue-Mo-Or9-02 [Invited]: Development of High Stable Field REBCO Superconducting Magnet for MRI
Kazuya Yokoyama (Ashikaga Institute of Technology)
- Speaker at Wed-Mo-Po3.07-05 [47]: Influence of the size of soft-iron yoke on trapped field performance of HTS bulk
Zhang Yong (Superconductivity and New Energy R&D Center (SNERDC), Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education), Southwest Jiaotong University, Chengdu, Sichuan 610031,China.)
- Speaker at Wed-Af-Po3.25-07 [111]: The rapid heating and quenching method for MgB2 superconducting wires with kilometer-grade length
Zhao Yong (College of Physics and Energy, Fujian Normal University, Fuzhou, Fujian 350117, China.)
- Speaker at Tue-Mo-Po2.13-07 [114]: Effects of Processing Conditions on Critical Current Density and Flux Pinning for Nb3Al Wires Fabricated by Jelly Roll Method
Byeongha Yoo (Korea University)
- Speaker at Thu-Mo-Po4.09-06 [68]: Progress on the Superconducting Joint Technique for the Reacted MgB2 Wires for MRI Magnet Development
Miyeon Yoon (Korea Polytechnic University)
- Speaker at Mon-Af-Po1.11-02 [2]: A Concentrically Arranged Joint-less HTS Coil System for Persistent Current Mode Operation
Jun Yoshida (Sumitomo Heavy Industries, Ltd.)
- Speaker at Thu-Af-Or23-05: Excitation Test of Superconducting Magnet for 230MeV Isochronous Cyclotron for Proton Therapy
Hui Yu
- Speaker at Tue-Af-Po2.16-09 [23]: Superconducting transformer for superconducting cable research and development
Zhou Yu (Southwest Jiaotong University)
- Speaker at Tue-Mo-Po2.13-09 [116]: Phase structure and superconducting properties of RHQT Nb3Al wires fabricated by static and dynamic rapid heating
xi Yuan (North China Electric Power University)
- Speaker at Mon-Af-Po1.11-01 [1]: Experiment and simulation of the magnetic field produced by the HTS magnet magnetized by the flux pump
Louis ZANI (CEA)
- Speaker at Wed-Mo-Po3.01-06 [6]: CEA Broad Design Studies on EU Demo TF, CS and PF Magnets Systems
roberto zanino (politecnico di torino)
- Speaker at Wed-Mo-Po3.01-03 [3]: Optimization of the fast discharge time constant for the DTT Toroidal Field magnets
Andrea Zappatore (Politecnico di Torino)
- Speaker at Mon-Mo-Or3-06: Calibration, validation and application of a novel 1D thermal-hydraulic/electric model for the quench analysis of the Al-slotted core HTS conductor for fusion applications
ZHIDUN ZENG (Company Name (optional))
- Speaker at Thu-Mo-Po4.12-04 [91]: The model and characteristics of SMES coil (1MJ) constructed of corc cable
Yujia Zhai (Hunan University)
- Speaker at Mon-Af-Po1.19-09 [73]: Contactless Magnetizing Technology Based on YBCO High Temperature Superconducting Tape
Yuhu Zhai (Princeton Plasma Physics Laboratory)
- Speaker at Wed-Mo-Po3.02-01 [11]: Conceptual Design of Compact CS Insert for HTS Spherical Tokamak FNSF
zhan zhang (Chinese Academy of Sciences (CAS) )
- Speaker at Mon-Mo-Po1.04-13 [45]: Fabrication and High-field Performance of the First Iron-Based Superconductor Racetrack Coil
- Speaker at Wed-Af-Or14-08: Fabrication and Test of ϕ35 mm Iron-Based Superconductor Coils
Tianjue Zhang (China Institute of Atomic Energy)
- Speaker at Mon-Mo-Po1.03-15 [34]: Magnetic Field Measurement, Amending and Processing for 230MeV Superconducting Cyclotron Main Magnet
- Speaker at Mon-Mo-Po1.03-16 [35]: Preliminary Study of the High Temperature Superconducting Solution for 2GeV CW FFAG Magnet
Ke Zhang (Western Superconducting Technologies Co. Ltd.)
- Speaker at Wed-Af-Po3.21-09 [75]: Performance Improvements to Nb3Sn Superconducting Wires by bronze route
Xintao Zhang (the Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China, University of Science and Technology of China, Hefei 230026, China )
- Speaker at Mon-Af-Po1.11-04 [4]: Progress in the Development of a 25 T All Superconducting Magnet with Small-Scale YBCO Insert Coil
Fu Zhang (Jiangsu University School of Electrical and information engineering)
- Speaker at Tue-Af-Po2.20-03 [55]: Low-Iron-Loss Design of a Flux-Modulated Motor Considering Air-Gap Harmonics
Kai Zhang (PSI - Paul Scherrer Institut)
- Speaker at Mon-Mo-Po1.02-09 [21]: HTS magnetization current simulation using ANSYS iterative algorithm method and user defined element
Yuanzhi Zhang (Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.08-06 [58]: Electromagnetic Design of an HTS Claw Pole Wind Generator
- Speaker at Thu-Mo-Po4.06-04 [42]: Comparison of Electromagnetic Performance of 10-MW HTS Double-Stator Flux Modulation Generators With Different Topologies for Offshore Direct-Drive Wind Turbines
- Speaker at Wed-Mo-Po3.13-08 [116]: Analysis of Novel Wound Field Flux Linear Reversal Machine with Multiple MMF Working Harmonics
Yu Zhang (Huazhong University of Science and Technology)
- Speaker at Mon-Af-Po1.12-06 [13]: An Improved AC loss Calculation Method Based on H-formulation for HTS Magnets with Iron Core
Guomin Zhang (Key Laboratory of Applied Superconductivity, Institute of Electrical Engineering,Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.10-02 [110]: Dynamic behaviors of the axial levitation force for the radial-type superconducting magnetic bearings
Lige Zhang (Huazhong university of Science and Technology)
- Speaker at Wed-Af-Po3.20-15 [67]: Topology Optimization of the Pole Shape in Passive Magnetic Channel using MMA Method
Zhongqi Zhang (Huazhong University of Science and Technology)
- Speaker at Wed-Mo-Po3.04-03 [23]: Structure Optimization of The Fast Scanning Magnets for Proton Therapy
Fengge Zhang
- Speaker at Mon-Af-Po1.22-11 [108]: Design and Analysis of a Novel Low-Speed and High-Torque Synchronous Motors with PM and Reluctance Hybrid Rotor
- Speaker at Thu-Mo-Po4.06-07 [45]: A Novel Thermal Network Model for Double Stator Brushless Doubly-Fed Generator With Cage-Barrier Rotor Based on Improved Mechanical Structure
- Speaker at Tue-Mo-Po2.11-07 [93]: Comparative research for a novel dual stator synchronous machine with permanent magnet-reluctance composite rotor
Min Zhang (University of Strathclyde)
- Speaker at Thu-Mo-Po4.07-06 [51]: Maximising the trapped field of HTS ring magnets
Haiyang Zhang (Southwest jiaotong university)
- Speaker at Tue-Mo-Po2.10-09 [81]: The study of quench behavior of REBCO cables under different twist pitch and perpendicular magnetic field
Yongliang Zhang (Chinses Academy of Science)
- Speaker at Wed-Af-Po3.21-11 [77]: Impact of transverse compression on the sub-element RRP Nb3Sn strand
Zili Zhang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Speaker at Thu-Mo-Po4.09-04 [66]: Investigations on the synthesis and melt-growth process of low melt temperature REBCO materials
Shaozhe Zhang (Wuhan National High Magnetic Field Center,Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.01-04 [3]: The Design of the 30kA DCCT using in the FTPMF system
- Speaker at Tue-Af-Po2.16-12 [26]: Improvement of the performance of Flat-top Pulsed High Magnetic Field Facility based on battery-bank power supply
Shuai Zhang (Southwest Jiaotong University)
- Speaker at Thu-Mo-Po4.14-08 [115]: Analysis and Experimental Test on a Permanent Magnet EDS System Employing an Annular Halbach Structure
- Speaker at Thu-Mo-Po4.14-04 [111]: Levitation Force Characteristics of High-Temperature Superconducting Bulks in a High Magnetic Field
Zhangfei Zhao (Wuhan National High Magnetic Field Center Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.01-05 [4]: Research on Influence of High Pulse Magnet Fault on Power Supply and Protection Strategy
- Speaker at Thu-Mo-Po4.01-06 [5]: Analysis of the commutation of the 24-pluse converter for high plused magnet outer coil power supply
LIXIA ZHAO
- Speaker at Tue-Mo-Po2.04-06 [20]: Magnet design of the electron cooling System for HIAF
Ziwei Zhao (Hebei University of Technology)
- Speaker at Mon-Af-Po1.23-08 [117]: Residual Flux Measurement and Reduction in the Single-phase Power Transformer
Yue Zhao (China Shanghai Jiao Tong University)
- Speaker at Wed-Af-Po3.18-01 [38]: Development of High Je 2G HTS Wires for High-Field Magnet Applications
Liu Zhaoxin (China)
- Speaker at Mon-Mo-Po1.09-01 [97]: 3D modeling and analysis of superconducting tape stack conductors for uniform trapped field
Jinxing Zheng (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Mon-Mo-Or1-03: Challenges of Superconducting Magnet System and Development of TF Prototype Coil of CFETR
shijun zheng (Institute of Modern Physics，Chinese Academy of Sciences)
- Speaker at Wed-Mo-Po3.11-01 [88]: Quench analysis of no-insulation magnet using YBCO coated conductor tapes with copper cladding
Wang Zhenglei (Wuhan National High Magnetic Field Center,Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.01-04 [3]: The Design of the 30kA DCCT using in the FTPMF system
- Speaker at Tue-Af-Po2.16-12 [26]: Improvement of the performance of Flat-top Pulsed High Magnetic Field Facility based on battery-bank power supply
Sergei Zherlitsyn (Helmholtz-Zentrum Dresden-Rossendorf)
- Speaker at Mon-Af-Or4-03: Pulsed-Magnet Developments at the Dresden High Magnetic Field Laboratory
Jianxin Zhou (Institute of High Energy Physics, CAS)
- Speaker at Thu-Mo-Po4.03-02 [13]: Development of rotating coil measurement system
Jun Zhou (Huazhong University of Science and Technology)
- Speaker at Tue-Af-Po2.25-08 [118]: A Novel Trenchless Detection Technology Based on Transient Electromagnetic Method for Power Poles
Xue Zhou (jiangsu university school of electrical and information engineering)
- Speaker at Mon-Af-Po1.21-12 [99]: Design and Analysis of A Partitioned-Rotor and Staggered-Stator Hybrid Excited Flux Switching Permanent Magnet Machine for Hybrid Electric Vehicles
Pengbo Zhou (Southwest Jiaotong University)
- Speaker at Tue-Af-Po2.16-04 [19]: Experimental and Numerical Characterization of the Contactless Self Current Drived HTS Flux Pump
Chao ZHOU (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China )
- Speaker at Thu-Mo-Po4.05-06 [36]: Intra-wire resistance and AC loss of multi-filamentary Bi2212 round wire
- Speaker at Mon-Af-Po1.19-02 [68]: The design and analysis of power supply topology for high-field MRI superconducting magnet
Kao Zhou (Huazhong University of Science and Technology)
- Speaker at Thu-Mo-Po4.03-08 [19]: Feasibility Study of Distributed Optical Fiber Applied in the Temperature Measurement of HTS Cables
Kai Zhu (Huazhong University of Science and Technology)
- Speaker at Tue-Af-Po2.19-01 [42]: Instantaneous AC Loss Measurement of HTS Coil
Yanmin Zhu (Western Superconducting Technologies Co., Ltd)
- Speaker at Tue-Mo-Po2.13-12 [118]: Study on the defects degree and flat-rolling reduction of round wires of Nb3Sn Rutherford Cable for High-Energy Accelerators
Yingshun Zhu (Institute of High Energy Physics,Chinese Academy of Sciences)
- Speaker at Mon-Mo-Po1.03-12 [32]: Final focus superconducting magnets for CEPC
- Speaker at Wed-Af-Po3.20-13 [65]: A rotating coil system based on CMM for high gradient small aperture quadrupoles in HEPS-TF
Zixuan Zhu
- Speaker at Mon-Mo-Or3-05: Quench Behaviour of Multi-Layer High Temperature Superconducting CORC Cables used in Hybrid Electric Aircraft
- Speaker at Wed-Mo-Po3.13-02 [110]: Modelling and Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft
Zhigang Zhu (Institute of Plasma Physics, Chinese Academy of Sciences)
- Speaker at Wed-Mo-Po3.03-04 [20]: Conceptual design of the cryogenic system for large scale superconducting coil test
Ming Zhuang
- Speaker at Wed-Mo-Po3.03-04 [20]: Conceptual design of the cryogenic system for large scale superconducting coil test
Alexander Zlobin (Fermilab)
- Speaker at Tue-Mo-Or7-01: Assembly and First Test of a 15 T Nb3Sn Dipole Demonstrator
Lorenzo Zoboli (ENEA)
- Speaker at Wed-Mo-Po3.01-04 [4]: Structural assessment of the DTT Poloidal Field Coil system
Guihong Zou (high magnetic field laboratory of Chinese Academy of Sciences)
- Speaker at Wed-Af-Po3.24-04 [98]: Design and research of a REBCO plate-stacked coil
刘小川 (ASIPP)
- Speaker at Wed-Mo-Po3.10-06 [80]: Research on non-destructive examination of NbSn3 cables based on the method of inversion of electromagnetic property

Choose timezone

MT26 Abstracts, Timetable and Presentations

Conference Management