Indico celebrates its 20th anniversary! Check our blog post for more information!

27–31 Jan 2020
Tbilisi State University
Asia/Tbilisi timezone

A High-Granularity Timing Detector for the Phase-II upgrade of the ATLAS Calorimeter system: beam test results

30 Jan 2020, 11:20
20m
Building I, Room 317 (Tbilisi State University)

Building I, Room 317

Tbilisi State University

1 Chavchavadze Av., Tbilisi, Vake district

Speaker

Chiara Grieco (Istitut de Fisica d'Altes Energies (IFAE) - Barcelona (ES))

Description

The expected increase of the particle flux at the high luminosity phase of the LHC (HL-LHC) with instantaneous luminosities up to L ≃ 7.5×1034 cm−2 s-1 will have a severe impact on the ATLAS detector performance. The pile-up is expected to increase on average to 200 interactions per bunch crossing. The reconstruction and trigger performance for electrons, photons as well as jets and transverse missing energy will be severely degraded in the end-cap and forward region, where the liquid Argon based electromagnetic calorimeter has coarser granularity and the inner tracker has poorer momentum resolution compared to the central region. A High Granularity Timing Detector (HGTD) is proposed in front of the liquid Argon end-cap calorimeters for pile-up mitigation and for bunch per bunch luminosity measurements.
This detector should cover the pseudo-rapidity range from 2.4 to about 4.0. Two silicon sensors double sided layers are foreseen to provide a precision timing information for minimum ionizing particle with a time resolution better than 50 ps per hit (i.e 30 ps per track) in order to assign the particle to the correct vertex. Each readout cell has a transverse size of 1.3×1.3 mm2 leading to a highly granular detector with about 3 millions of readout electronics channels. Low Gain Avalanche Detectors (LGAD) technology has been chosen as it provides an internal gain good enough to reach large signal over noise ratio needed for excellent time resolution.
A 4 period test-beam campaign in 2019 has been conducted at the DESY T22 beamline. Proton and neutron irradiated LGAD prototypes for the HGTD were tested from different technologies and manufacturers. Gallium, boron and carbon implanted 1×1 mm2 diodes and 2×2 arrays are compared for achieved timing performance, post-irradiation efficiency and uniformity at fluences up to 3e15 neq/cm2. A time resolution of < 50 ps is observed in most cases, while integrating timing information to the EUDET system allows for a surface resolution of less than 50 μm. 2-dimensional timing maps are exploited to establish noise occupancy levels and lateral field expansion at high fluences. The triggering architecture, picosecond synchronization scheme and analysis logic will also be presented as well as application-specific electronics and components.

Primary author

Chiara Grieco (Istitut de Fisica d'Altes Energies (IFAE) - Barcelona (ES))

Presentation materials